Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Detector de Minciuni

    Uploaded by

    Cristina Dobre
    This document provides a bill of materials for a lie detector circuit including quantities and descriptions of one 33k ohm 1/4W resistor, one 5k potentiometer, one 1.5k ohm 1/4W resistor, one 1uF 16V electrolytic capacitor, one 2N3565 NPN transistor, one 0-1 mA analog meter, and a case, wire, and electrodes. Notes specify that the electrodes can be alligator clips, pads, or wires and tape, and that the circuit is used by attaching electrodes to the back of the hand and adjusting the meter to zero before asking questions.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Detector de Minciuni

    Uploaded by

    Cristina Dobre
    29 views2 pages
    This document provides a bill of materials for a lie detector circuit including quantities and descriptions of one 33k ohm 1/4W resistor, one 5k potentiometer, one 1.5k ohm 1/4W resistor, one 1uF 16V electrolytic capacitor, one 2N3565 NPN transistor, one 0-1 mA analog meter, and a case, wire, and electrodes. Notes specify that the electrodes can be alligator clips, pads, or wires and tape, and that the circuit is used by attaching electrodes to the back of the hand and adjusting the meter to zero before asking questions.

    Original Description:

    detector

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a bill of materials for a lie detector circuit including quantities and descriptions of one 33k ohm 1/4W resistor, one 5k potentiometer, one 1.5k ohm 1/4W resistor, one 1uF 16V electrolytic capacitor, one 2N3565 NPN transistor, one 0-1 mA analog meter, and a case, wire, and electrodes. Notes specify that the electrodes can be alligator clips, pads, or wires and tape, and that the circuit is used by attaching electrodes to the back of the hand and adjusting the meter to zero before asking questions.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    29 views2 pages

    Detector de Minciuni

    Uploaded by

    Cristina Dobre
    This document provides a bill of materials for a lie detector circuit including quantities and descriptions of one 33k ohm 1/4W resistor, one 5k potentiometer, one 1.5k ohm 1/4W resistor, one 1uF 16V electrolytic capacitor, one 2N3565 NPN transistor, one 0-1 mA analog meter, and a case, wire, and electrodes. Notes specify that the electrodes can be alligator clips, pads, or wires and tape, and that the circuit is used by attaching electrodes to the back of the hand and adjusting the meter to zero before asking questions.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Part Total Qty.

    Description Substitutions
    R1 1 33K 1/4W Resistor
    R2 1 5K Pot
    R3 1 1.5K 1/4W Resistor
    C1 1 1uF 16V Electrolytic Capacitor
    Q1 1 2N3565 NPN Transistor
    M1 1 0-1 mA Analog Meter
    MISC 1 Case, Wire, Electrodes (See Nots)
    Notes

    1. The electrodes can be alligator clips (although they can be


    painful), electrode pads (like the type they use in the hospital), or
    just wires and tape.
    2. To use the circuit, attach the electrodes to the back of the subjects
    hand, about 1 inch apart. Then, adjust the meter for a reading of 0.
    Ask the questions. You know the subject is lying when the meter
    changes.

    You might also like