Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    6EP33226SB000AY0 Datasheet en PDF

    Uploaded by

    Bernardo Sales

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6EP33226SB000AY0 Datasheet en PDF

    Uploaded by

    Bernardo Sales
    55 views4 pages

    Original Title

    6EP33226SB000AY0_datasheet_en.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    55 views4 pages

    6EP33226SB000AY0 Datasheet en PDF

    Uploaded by

    Bernardo Sales

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Data sheet 6EP3322-6SB00-0AY0

    LOGO!POWER 12 V/4.5 A
    LOGO!POWER 12 V / 4.5 A Regulated power supply input: 100-240
    V AC output: 12 V DC/ 4.5 A

    Input
    Input 1-phase AC or DC
    Rated voltage value Vin rated 100 ... 240 V
    Voltage range AC 85 ... 264 V
    Input voltage
    ● at DC 110 ... 300 V
    Wide-range input Yes
    Overvoltage resistance 300 V AC for 1 s
    Mains buffering at Iout rated, min. 40 ms; at Vin = 187 V
    Rated line frequency 1 50 Hz
    Rated line frequency 2 60 Hz
    Rated line range 47 ... 63 Hz
    Input current
    ● at rated input voltage 120 V 1.13 A
    ● at rated input voltage 230 V 0.61 A
    Switch-on current limiting (+25 °C), max. 50 A
    I²t, max. 3 A²·s
    Built-in incoming fuse internal

    6EP3322-6SB00-0AY0 Subject to change without notice


    Page 1/4 10/30/2018 © Copyright Siemens
    Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic
    B or from 6 A characteristic C

    Output
    Output Controlled, isolated DC voltage
    Rated voltage Vout DC 12 V
    Total tolerance, static ± 3 %
    Static mains compensation, approx. 0.1 %
    Static load balancing, approx. 0.1 %
    Residual ripple peak-peak, max. 200 mV
    Residual ripple peak-peak, typ. 30 mV
    Spikes peak-peak, max. (bandwidth: 20 MHz) 300 mV
    Spikes peak-peak, typ. (bandwidth: 20 MHz) 50 mV
    Adjustment range 10.5 ... 16.1 V
    Product function Output voltage adjustable Yes
    Output voltage setting via potentiometer
    Status display Green LED for output voltage OK
    On/off behavior No overshoot of Vout (soft start)
    Startup delay, max. 0.5 s
    Voltage rise, typ. 100 ms
    Rated current value Iout rated 4.5 A
    Current range 0 ... 4.5 A
    ● Note +55 ... +70 °C: Derating 2%/K
    Supplied active power typical 54 W
    Parallel switching for enhanced performance Yes
    Numbers of parallel switchable units for enhanced 2
    performance

    Efficiency
    Efficiency at Vout rated, Iout rated, approx. 87.1 %
    Power loss at Vout rated, Iout rated, approx. 8 W
    Power loss [W] during no-load operation maximum 0.3 W

    Closed-loop control
    Dynamic mains compensation (Vin rated ±15 %), 0.2 %
    max.
    Dynamic load smoothing (Iout: 10/90/10 %), Uout ± 4 %
    typ.
    Load step setting time 10 to 90%, typ. 1 ms
    Load step setting time 90 to 10%, typ. 1 ms

    Protection and monitoring


    Output overvoltage protection Yes, according to EN 60950-1
    Current limitation, typ. 5 A
    Property of the output Short-circuit proof Yes
    Short-circuit protection Constant current characteristic

    6EP3322-6SB00-0AY0 Subject to change without notice


    Page 2/4 10/30/2018 © Copyright Siemens
    Enduring short circuit current RMS value
    ● maximum 5 A
    Overcurrent overload capability in normal operation overload capability 150% Iout rated typ. 200 ms
    Overload/short-circuit indicator -
    measuring point for output current 50 mV =^ 4.5 A

    Safety
    Primary/secondary isolation Yes
    Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN
    50178
    Protection class Class II (without protective conductor)
    CE mark Yes
    UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259;
    cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File
    E151273, NEC class 2 (acc. to UL 1310)
    Explosion protection ATEX (EX) II 3G Ex nA IIC T3; cULus Class I Div. 2 (ANSI/ISA-
    12.12.01, CSA C22.2 No. 213) Group ABCD, T4, File E488866
    FM approval Class I, Div. 2, Group ABCD, T4
    CB approval Yes
    Marine approval ABS, DNV GL
    Degree of protection (EN 60529) IP20

    EMC
    Emitted interference EN 55022 Class B
    Supply harmonics limitation not applicable
    Noise immunity EN 61000-6-2

    Operating data
    Ambient temperature
    ● during operation -25 ... +70 °C
    — Note with natural convection
    ● during transport -40 ... +85 °C
    ● during storage -40 ... +85 °C
    Humidity class according to EN 60721 Climate class 3K3, no condensation

    Mechanics
    Connection technology screw-type terminals
    Connections
    ● Supply input L, N: 1 screw terminal each for 0.5 ... 2.5 mm2 single-core/finely
    stranded
    ● Output +, -: 1 screw terminal each for 0.5 ... 2.5 mm²
    ● Auxiliary -
    Width of the enclosure 54 mm
    Height of the enclosure 90 mm
    Depth of the enclosure 53 mm
    Required spacing

    6EP3322-6SB00-0AY0 Subject to change without notice


    Page 3/4 10/30/2018 © Copyright Siemens
    ● top 20 mm
    ● bottom 20 mm
    ● left 0 mm
    ● right 0 mm
    Weight, approx. 0.2 kg
    Product feature of the enclosure housing for side-by- Yes
    side mounting
    Installation Snaps onto DIN rail EN 60715 35x7.5/15, direct mounting in
    different mounting positions
    MTBF at 40 °C 2 566 680 h
    Other information Specifications at rated input voltage and ambient temperature +25
    °C (unless otherwise specified)

    6EP3322-6SB00-0AY0 Subject to change without notice


    Page 4/4 10/30/2018 © Copyright Siemens

    You might also like