DVB-T2

Digital Terrestrial Receiver

WD-822T2

USER’S MANUAL
 Index
Important Safety Instructions …………………………………….….……. 3
Main Features ……………………………………………………….….….. 5
Front and Rear Panel ………………………………………………..…….. 6
Remote Control ………………………………………………………..….... 7
Installing the Batteries ………………………………………………..…..... 8
Using the Remote Control ……………………………….…………......…. 8
Connecting to a Television …………………………………………….….. 9
First Time Installation ……………………………………………..…..…… 9
Basic Operation ………………………………………………….…...……. 10
1. Program Manage Settings …………………………………...….…… 10
2. Program Edit …………………………………………………….…….. 10
2.1 Set Favourite Program ……………………………………......….. 10
2.2 View Favourite Program ………………………………………….. 11
2.3 Delete a TV or Radio Program ………………………….….……. 11
2.4 Skip TV or Radio Program ……………………………….….…… 11
2.5 Move a TV or Radio Program ……………………………………. 11
2.6 Lock Program ……………………………………………………… 11
3. EPG (Electronic program guide) …………………………………….. 12
4. Sort ……………………………………………………………………… 12
5. LCN (Logical channel number) ………………………………………. 12
6. Picture ………………………………………………………………….. 12
7. Channel Search ………………………………………………............. 13
7.1 Auto Search ……………………………………………………….. 13
7.2 Manual Search …………………………………………….….…… 14
8. Time Setting ………………………………………………….….…….. 14
9. Option ………………………………………………………….…...….. 15
10. System Setting ………………………………………………..….….. 16
11. USB ………………………………………………………….….…….. 17
Troubleshooting ………………………………………………….…….…… 19
Technical Specifications ………………………………………….……….. 20
Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in accordance with the
instructions.
8) Do not install near any heat sources such as radiations, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lighting storms or when unused for long
periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
Supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
14) Mains plug is used as the disconnect device, the disconnect device
shall remain readily operable.
15) The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles, should be placed
on the apparatus.
17) Attention should be drawn to the environmental aspects of battery
disposal.
18) The use of apparatus in moderate climate.
WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
3
WARNING: The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like.

The symbol indicates that dangerous voltages constituting a

risk of electric shock are present within this unit.

The symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this
unit.

This symbol indicates that this product incorporates double

insulation between hazardous mains voltage and user
accessible parts. When servicing use only identical replacement
parts.

CAUTION:
When the apparatus was in electrostatic circumstance, it may
be malfunction and need to reset by user.

4
Main Features

Fully comply with DVB-T2 and H.264, AVC, MPEG4, MPEG2

Standard
The maximum speed of the traffic flow of at least 50 Mbit / sec
In the 32k mode, a larger part of the standard 8 MHz channel can be
used, adding about 2% extra capacity
HDMI 1.3 (up to 1080p) Output
Support EPGDisplay Present/ Next TV Program
DVB-T2 is specified for 1.7, 5, 6, 7, 8, and 10 MHz channel bandwidth
PAL & NTSC Auto Switch
Support VBI&OSD Teletext, OSD Subtitle, LCN
One Scart and YpbPr jacks
Multi-languages Support
Auto / Manual scan
1000 channels
Parent Control
4 digits LED display
support Timer recording
EuP
Real-time recording function with delay
Support USB SW Upgrade/Media Playback
& Recording optional RF Modulator optional Two USB, one for
reading, the other for recording optional Built-in 2.5inch SATA HDD
(160G, 250G, 500G), Playback & Recording optional

Package Contents
Before installing the product, please check that you have in possession
the following.
~ DVB-T Receiver x1
~ Parent Control x1
~ User Manual x1

5
Front and Rear Panel
Front panel Guide:

c de f gh i j k
1. POWER BUTTON: Used to turn on/off the main power supply.
2. OK: Press the enter button to confirm.
3. MENU: Display Main Menu
4. LED DISPLAY WINDOW: Used to display channel number.
5. STANDBY INDICATOR: Used to visually show power state of the set
top box, the LED will turn red if the set top box enter standby mode.
6. SIGNAL LED: Used to receive the signal from the remote control.
7.VOL+/VOL-: Turn up or down the volume of a service
8. CH+/CH-: Used to change channels without using the remote control.
9. USB 2.0 Port: Data input from USB storage devices.
Rear panel Guide:

c d e f g hi 8
1. ANT IN: This socket connects to your external Aerial.
2. ANT OUT: This socket will bypass the RF signal to either your TV or
another video system.
3. COAXIAL: Digital audio output
4. HDMI（1.3）: High definition audio and video output used to connect to a HDMI device
5. TV SCART: This socket connects to your TV.
6. Y/Pb/Pr: These sockets connect to your Tvcomponent input terminals.
7. VIDEO: This socket outputs composite video signal.
8. R/L: This socket outputs Analog audio L/R signal.
6
Remote Control

KEY FUNCTION KEY FUNCTION

Navigates through the
Turn the STB Receiver ON CH+,
POWER Menus. Selects the next or
and OFF CH-
previous Channel
Navigates through the
VOL+,
MUTE Mute or Restore Audio Output Menus. Increases or
VOL-
decreases volume.
Skips to the previous track
during playing media and
0~9 Selects a channel or setting l◄◄ skips to the previous
channel during playing DTV.
Executes the selected item Skips to the next track during
in the menu screen or playing. media and skips to
LIST
enters the desired value in ►►l the next channel during
any input mode playing DTV.
Display information about Searches forwards during
INFO
the current channel ◄◄ media play
Selects an Audio Language Searches backwards during
AUDIO
or Audio Mode ►► media play
Go back to the previous Press this key start to record
RETURN
viewed channel the program
GOTO Selects the play time of media ► Starts or resumes media play
Display subtitle options
SUB-T (availability depends on the ■ Stops media play
channel)
Switches from TV function to
TV/
MENU Turns on Main Menu Radio function and from
RADIO
Radio to TV.
(Electronic Program Guide) View text information of
EPG TXT
Turns the program guide on current service (if available)
Displays your favorite
channels list. Press FAV
FAV PAUSE Pauses media play
again to access to the other
favorite lists
Use this key to quit current Selects Repeat or turn off
EXIT REPEAT
menu Repeat mode
Operate different function in
TEXT screen
GREEN:Resolution
YELLOW:Aspect ratio
BLUE:Book schedule
7
Installing the Batteries
Remote Control
Remove the battery cover from the and put 2xAAA size
batteries inside the compartment.
The diagram inside the Battery Compartment shows the correct way to
install the batteries.

Using the Remote Control

To use the Remote Control, point it towards the front of the Digital Set Top
Box.
The Remote Control has a range of up to 7 metres from the Set Top Box
at an angle of up to 120 degrees.

The Remote Control will not operate if its path is blocked.

Sunlight or very bright light will decrease the sensitivity of

the Remote Control.

8
Connecting to a Television
For a basic connection from your Set Top Box to the television, use the
Composite connection outlined below.
For a higher quality connection, use the Component Video connection
outlined below combined with the Composite Audio.
For the highest quality connection use a direct HDMI connection, see
below.

First Time Installation

After all connections have been made properly, switch on TV and make
sure the receiver is connected to the Main Power. Press Power button to
switch receiver on. If you are using the receiver for the first time or
restored to Factory Default, the Main Menu will appear on your TV screen.

(1). Select [OSD Language] and press RIGHT/LEFT key to select an

language
(2). Select [Country] and press RIGHT/LEFT key to select your country of
Residence

9
(3). Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search
(4). Once channel tuning is complete, you are now ready to watch TV

Basic Operation

1. Program Manage Settings

To access the Menu, press the MENU button and select [Program]. The
Menu provides options to adjust the Program Manage Settings. Select an
option and press OK or RIGHT to adjust that setting. Press the EXIT
button to exit the Menu.

2. Program Edit
To edit your program preferences (lock, skip, favourite, move or delete),
you will need to enter the Program Edit Menu. This Menu requires a
password to access. Enter the default password '000000'.

2.1 Set Favourite Program

You can create a shortlist of favourite programs that you can easily
access.
Set Favourite TV or Radio program:
(1). Select the pre ferred program then press the FAVOURITE button.
A heart-shaped symbol will appear and the program is marked as a
favourite.
(2). Repeat the previous step to select more Favourite programs.
10
(3). To confirm and exit the Menu, press the EXIT key
Disable favourite TV or Radio Program:
Press the FAVOURITE button on the Remote Control with the heart-
shaped symbol.

2.2 View Favourite Program

(1). Press the Favourite button and the Favourite Menu will appear.
(2). Press UP/DOWN to select your Favourite Programs.
(3). Press OK to select your favourite program.

2.3 Delete a TV or Radio Program

(1). Select the Program and then press the BLUE button.
A message will appear. Press OK to delete the program
(2). Repeat the previous step to select more programs to delete.

2.4 Skip TV or Radio Program

(1). Select the program you would like to skip and press the GREEN button.
A skip symbol is displayed. The program is marked as a skip.
(2). Repeat the previous step to select more programs.
(3). To confirm and exit the menu, press EXIT key.
Disable a skip TV or Radio program:
Press the GREEN button on the skip program with the skip symbol.

2.5 Move a TV or Radio Program

(1). Select the preferred program then press the RED button. A move
symbol will appear
(2). Press UP/DOWN to move the program
(3). Press OK to confirm
(4). Repeat the above steps to move more channels

2.6 Lock Program

You can lock selected programs for restricted view.
Lock a TV or Radio Program:
(1). Select the preferred program then press the YELLOW button. A lock-
shaped symbol is displayed. The program is now marked as locked
(2). Repeat the previous step to select more programs
(3). To confirm and exit the menu, press the EXIT button
(4). Press the YELLOW button to disable the locked program
(5). To view the locked program, you will be require to enter either the
default password '000000' or your last set password.

11
3. EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs seven
days in advance for every tuned channel. Press the EPG button on the
Remote Control to access guide.

You can use the UP/DOWN key to select the preferred program. If there is
more than one page of information, use the BLUE button for page up and
the YELLOW button for page down.

4. Sort
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order
[Name] - Sort the channels in alphabetical order
[Service ID] - Sort the channels according to the station

5. LCN (Logical channel number)

Set LCN on or off.

6. Picture
To access the Menu, press MENU then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to select
an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit
the menu.

(1). Aspect Ratio

You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9
Full Screen or Auto to get the maximum display when watching TV.

12
(2). Resolution
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i] : for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080p]: for NTSC or PAL system TV.
(3). TV format
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(4).video out:
[CVBS]:Video signal out.
[RGB]:Off color video signal out.
[YPbPr]:YPbPr signal out

7. Channel Search
To access the menu,press MENU and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the menu.

7.1 Auto Search

Search and install all channels automatically. This option overwrites all
preset channels.
(1). Select [Auto Search] and press OK or RIGHT to start channel search.
(2). To cancel channel search, press EXIT.

13
7.2 Manual Search
Install new channels manually. This option adds new channels without
changing the current channels list.
(1). Select [Manual Search] then press OK or RIGHT. The channel search
screen will appear.

(2). Press the RIGHT/LEFT key to select the channel frequency.

(3). Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list.
If channels can’t be found, then exit the menu.
(3) Country
Select your country of residence.
(4) Antenna power
Enable Antenna Power if an external active antenna is connected.

8. Time Setting
To access the M enu, press MENU then select [Time]. The Menu provides
options to adjust the time settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the
setting. Press EXIT to exit the menu.

14
(1). Time offset
Select auto or manual for GMT offset adjustments.
(2). Country Region
Select the Country Region when [Time Offset] is set to Auto.
(3). Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
(4). Sleep
If this setting is off, this function does not work. If this setting is not off,
a message will pop up after your preferred time to inform you, that the
device will go in to sleep mode.
This message will appear under no any operation. Auto-off function
can be set in a timeperiod at 0-12 hours. Standard setting is 3 hours.
Press STANDBY button to exit sleep / auto-off mode.
(5).Hours Auto Standby
During watching TV and not using remote control, receiver turn into (3
hours standby mode) auto matically.

9. Option
To access the menu, press MENU and select [Option]. The menu
provides options to adjust the OSD Language, Subtitle Language and
Audio Language.
Select an option and press RIGHT/LEFT to adjust the setting.
Press EXIT to exit the Menu.

15
(1). OSD Language
Select an OSD language
(2). Audio Language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will be
used.
(3). Subtitle Language
Select the preferred subtitle language.
(4). Digital Audio
Select digital audio output mode.

10. System
To access the Menu, press MENU and select [System].The menu
provides options to adjust the system settings.
Press the UP/DOWN key to select an option and press RIGHT/LEFT to
adjust the setting.

Press EXIT to exit the Menu .

(1) Parental Guidance

You can restrict access to channels that are unsuitable
for children. To restrict/lock the channel you will need to enter either
the default password '000000' or your own password.
(2) Set Password
Set or change the password for locked programs. Enter your old
password or the default password '000000'. You will then be asked to
enter your new password. To confirm re-enter your new password.
Once it is confirmed, press EXIT to exit the Menu.
(3) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and press
OK to confirm. This option will delete all preset channels and settings.

16
(4) Information
View model, hardware and software information.
(5) Software update
If the status is set 'ON ', it will scan new software from broadcast
according to your preferred time in ' 'Start time ' '.
(6) USB Update
Upgrade software via USB

11. USB
To access the Menu, press the MENU button and select [USB]. The menu
provides options to playback Music and Photo files, it can support MP3,
WMA,JPEG,BMP files, The unit will only support USB device with FAT
and FAT32 file system. It will not support NTFS file system.

(1) Multimedia: if no USB device plug in,a warning message "No USB
Device is Found" displays, otherwise you can select the Music or
Photo type in this menu and press OK to enter the file browser and
select the file to playback.

17
(2) Photo configure:
-Slide Time: adjust slide show interval to 1~8 seconds.
-Slide Mode: adjust slide show effect as mode 0~59 or random.
-Aspect Ratio: Keep displays the picture as its original aspect,
Discard displays the picture in full screen mode.
(3) Movie Configure
- Aspect Ratio:
[Keep]: Play movie as its original aspect.
[Discard]: Play movie in full screen mode.
- Subtitle Specific:
[Small]: Displays the subtitle as small mode.
[Normal]: Displays the subtitle as normal mode.
[Big]: Displays the subtitle as big mode.
- Subtitle BG:
[White]: Displays the subtitle in white background.
[Transparent]: Displays the subtitle in transparent background.
[Grey]: Displays the subtitle in grey background.
[Yellowgreen]: Displays the subtitle in yellowgreen background.
- Subtitle Font Color:
[Red]: Displays Subtitle in red font.
[Blue]: Displays Subtitle in blue font. BLUE:Book schedule
[Green]: Displays Subtitle in green font. GREEN:Resolution

Note:
- We cannot guarantee compatibility (operation and/or bus power) with
all USB mass storage devices and assumes no responsibility for any
loss of data that may occur when connected to this unit.
- With large amounts of data, it may take longer for the system to read
the contents of a USB device.
- Some USB devices may not be properly recognized.
- Even when they are in a supported format, some files may not play or
display depending on the content.

- PVR Configure:
[Record Device]: Select the disk for the record.
[Format]: Format the selected disk.

18
Troubleshooting
Problem Potential Reasons What to do
Power isn’t connected Connect the power
No picture
The power switch is not on Switch on the power
Screen shows DVB-T cable not connected Plug in the DVB-T cable
“No Signal” Incorrect setting Reset setting
No or incorrect connection Connect the audio cable
with audio cable correctly
No sound from
speaker Sound on mute Turn off mute function
Incorrect sound track Try another sound track
No or incorrect Make sure cables are
Only sound, no connection with AV cable connected correctly
image on the
screen The program is a radio Press <TV/RADIO> key
program to shift into TV mode
The battery is exhausted Change battery
Remote Control
is not responding Remote Control is not Adjust the position of
facing or close enough to the Remote Control and
the Set Top Box move closer to the unit
The image
stopped suddenly The signal is too weak Strengthen the signal
or mosaic

19
Technical Specifications

Item Sub Item Parameter

170~230MHz
Input Frequency 470~860MHz

RF Input level -25~-82dBm

Tuner
IF Bandwidth 1.7、5、6、 7、8MHz

Modulation QPSK, 16QAM, 64QAM, 256QAM

Decoder Format MPEG4 AVC/H.264 HP@L4

MPEG2 [email protected]
Video Output Format 576P,720P,1080i,1080P, PAL/ NTSC

Output Port HDMI1.3

Recommendation (ISO / IEC
Decoder Format 13818-3), Dolby AC-3 (Dolby Digital)
Audio
Audio output Digital audio: S/PDIF

Voltage 100-240V~ 50/60Hz

Power
Power Max 12W

Photo JPEG, BMP, PNG

USB2.0 Audio MP3, WMA, AAC,AC3, AC3+

Video MPEG1,MPEG2,MPEG4,AV1 DIVX

Standby consumption ≤ 1W

20
21