Scribd
Upload
132 views

Features: 138 Watts DC Ups

This document summarizes the specifications of the PB256 Series battery charger systems. The summary includes key features such as ultra-low noise output, independent load and battery current limiting, over-temperature protection, and compliance with various safety and EMC standards. It also lists output voltages and currents, protections such as short circuit and over-voltage protection, and alarms including charger output OK and battery low alarms.

Uploaded by

Sofyan Andika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views

Features: 138 Watts DC Ups

This document summarizes the specifications of the PB256 Series battery charger systems. The summary includes key features such as ultra-low noise output, independent load and battery current limiting, over-temperature protection, and compliance with various safety and EMC standards. It also lists output voltages and currents, protections such as short circuit and over-voltage protection, and alarms including charger output OK and battery low alarms.

Uploaded by

Sofyan Andika
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BATTERY CHARGER SYSTEMS PB256 Series

1 3 8 W AT T S D C U P S

Features
• Ultra-low noise output
• Independent load & battery charging current
limiting
• DC output OK & battery OK alarms & LEDs
• Battery-LVD and low alarm
• Over-temperature protection
• Battery fuse fail LED

Specifications ENVIRONMENTAL
INPUT Operating temperature & 0 to 50oC ambient with derating;
Voltage 190...264 vac, or 190...400VDC humidity 5 to 90% relative humidity (noncondensing)
Line regulation 0.2% typical Over-temperature protection Automatic & auto-resetting

Current 3A maximum Cooling requirement Natural convection


Efficiency 80% minimum
Inrush current 15A on cold start
STANDARDS & APPROVALS
Frequency 45 to 65 Hz
Safety Complies with AS/NZS 60950, class 1
OUTPUT
EMC Emissions comply with AS/NZS CISPR11, Group
Voltage See table 1, Class B. Complies with ACA EMC Scheme, C-
Tick
Current See table
Isolation input - output 4242VDC for 1 minute
Load regulation 2% typical
input - ground 2121VDC for 1 minute
Current limit type Constant current > LVD volts output - ground 707VDC for 1 minute
(Load circuit) Foldback & hiccup < LVD volts ALARMS & BATTERY SPECIFIC FUNCTIONS
Current limit type Constant current
Charger output OK alarm Indicated by voltage-free changeover relay
(Battery circuit)
contacts & green LED: ON=OK
Short circuit protection Indefinite, auto-resetting Battery low alarm VBATT< 11.3V 12V BATT < 22.6 V24V BATT
Over-voltage protection 15.5 to 19.5 V latching (13.8Vdc output) Indicated by voltage-free changeover relay
31.5 to 39 V latching (27.6Vdc output) contacts & green LED: ON=OK
Ripple & noise 25 mVp-p (13.8Vdc output) Low voltage disconnect: 10.8V (Typical for 12Vdc battery)
45mVp-p (27.6Vdc output) 21.6V (Typical for 24Vdc battery)
Battery over-load protection Electronic circuit breakerauto-reset
Reverse polarity protection Internal fuse
Battery to load voltage drop 0.4 V (13.8V output)
0.2 V (27.6V output)
MECHANICAL
Case size 230 L x 93 W x 46 H (mm)
Weight 850g

290
PB256 Series

BATTERY CHARGER SYSTEMS


1 3 8 W AT T S D C U P S

Selection Table
MODEL OUTPUT OUTPUT
NUMBER VDC ILOAD IBATT POWER
PB256-1210CML 13.8V 8A 2A 138W*
PB256-2405CML 27.6V 4A 1A 138W*
Options:
-CC = conformal coating
-T = temperature probe * Note: please refer to Derating Curve
-XX = non -standard battery charging current, i.e. PB256-1210CML-05 for 5A

Technical Illustrations

Your dependable power partner – www.powerbox.com.au 291

You might also like