Scribd
Upload
37 views

Make Your Settings Only Into White Boxes Corresponding To Desired Standard Curve!

This document provides a tool to easily check the settings and timing parameters for various types of time-overcurrent protection curves, including IEEE, IEC, ANSI, IAC, and user-defined curves. It lists the settings, injected current multiples, and operate and reset times for each standard curve type.

Uploaded by

NADEEM KHALID
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
37 views

Make Your Settings Only Into White Boxes Corresponding To Desired Standard Curve!

This document provides a tool to easily check the settings and timing parameters for various types of time-overcurrent protection curves, including IEEE, IEC, ANSI, IAC, and user-defined curves. It lists the settings, injected current multiples, and operate and reset times for each standard curve type.

Uploaded by

NADEEM KHALID
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

The following is a tool for easy check of TOC standard curves operate and reset tim

1. Make your settings only into white boxes corresponding to desired standard curve!

IEEE Extr. Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset SETTINGS:
PKP TDM Multple of PKP PKP
1 1 4 2.00 seconds 1.94 seconds 1

IEEE Very Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset SETTINGS:
PKP TDM Multple of PKP PKP
0.33 0.85 1.65 1.11 seconds 0.77 seconds 2

IEEE Moderately Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset SETTINGS:
PKP TDM Multple of PKP PKP
0.875 0.5 1.2 4.12 seconds 2.75 seconds 1

IEC Curve A
SETTINGS: INJECTED: Time to Operate Time to Reset SETTINGS:
PKP TDM Multple of PKP PKP
0.42 10 16.7 18.32 seconds 0.06 seconds 1

IEC Curve B
SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM Multple of PKP SETTINGS:
0.1 0.09 1.69 0.08 seconds 0.01 seconds PKP
1
IEC Curve C
SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM Multple of PKP
0.015 1 0.02 102.86 seconds 74.83 seconds SETTINGS:
PKP
IEC Short Inverse 1
SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM Multple of PKP
0.015 1 0.02 4.32 seconds 0.64 seconds

A
IAC Long Inverse 0.243
SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM
1 2 5 6.67 seconds 0.02 seconds
I/Ipkp =

ANSI Extreme Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM
1 2 5 0.494831 seconds 0.02 seconds

ANSI Very Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM
1 4 5 1.0395457 seconds 0.04 seconds

ANSI Normal Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM
1 4 5 1.6271441 seconds 0.04 seconds

ANSI Moderate Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
PKP TDM
1 4 5 1.3294834 seconds 0.04 seconds
rd curves operate and reset time !

IAC Extr. Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
TDM Multple of PKP
1 0.5 -23.62 seconds -8.01 seconds

IAC Very Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
TDM Multple of PKP
1 4 1.31207 seconds 1.56 seconds

IAC Inverse
SETTINGS: INJECTED: Time to Operate Time to Reset
TDM Multple of PKP
1 0.5 -14.52 seconds -1.32 seconds

IAC Short Inverse


SETTINGS: INJECTED: Time to Operate Time to Reset
TDM Multple of PKP
5 4.5 0.29 seconds 0.06 seconds

I2t Curves
SETTINGS: INJECTED: Time to Operate Time to Reset
TDM Multple of PKP
1 0.5 400.00 seconds 25.00 seconds

FlexCurve A or B
SETTINGS: INJECTED: Time to Operate Time to Reset
TDM Multple of PKP to be calculated to be calculated
1 1.5 seconds seconds

B P Q K
0 0.04 1 0
D= 2
T= 7.3088265642

MIFII - USER CURVE


5

You might also like