Arduino Based Water Level Sensor With Notification
Arduino Based Water Level Sensor With Notification
TABLE OF CONTENTS
Title Page..............................................................................................................................i
Approval Sheet....................................................................................................................ii
Table of Contents................................................................................................................iii
List of Tables......................................................................................................................iv
List of Figures......................................................................................................................v
List of Appendices..............................................................................................................vi
Chapter Page
1 THE PROBLEM AND REVIEW OF RELATED LITERATURE AND
STUDIES
Introduction..................................................................................................1
Conceptual Framework................................................................................4
Statement of the Problem.............................................................................5
Significance of the Study.............................................................................6
Scope and delimitation.................................................................................6
Definition of Terms......................................................................................7
Research Design.........................................................................................10
Research Locale.........................................................................................10
Research Respondents and Sampling Technique......................................10
Research Instrument...................................................................................11
Questionnaire.............................................................................................11
Validation of Instrument…………………………………………………12
Administration of Instrument…………………………………………….12
Data Gathering Procedure……………………………………………….12
Ethnical Consideration…………………………………………………...13
Data Analysis…………………………………………………………….13
Product Development…………………………………………………….14
Budgetary Requirements…………………………………………………20
RERERENCES
APPENDICES iv
Figu
LIST OF TABLES
Page
LIST OF FIGURES
Page
LIST OF APPENDICES
Page
Chapter 1
Water level sensors are big help on creating awareness of the current status of
liquids whether it is inside of the container or outside in the environment. It uses different
kinds of sensors to gather data which will be processed by a computer and converts it to
human readable display. Water Level Sensors are used to detect the level of substances
that can flow. Such substances include liquids, slurries, granular material and powders.
(www. Rshydro.co.uk).
sensors for sewer water level measurement. It measures the time-of-flight ultrasonic
pulses reflected from a surface or water surface. Another type of non-contact is Radar
sensor. It also measures the time-of-flight of pulses but instead of ultrasonic, it uses radio
frequency. Radar uses more power than ultrasonic, and due to it, radars are more
expensive than ultrasonic. Every sensor needs a processor that is powered up of some
kind of sources. And usually, they are very complicated and requires special hardware to
program the controller. As stated by Yusuf (2014), Arduino made all this easy by making
it simple through programing, erasing, and reprograming in a very convenient time. This
This study aims to build a water level sensor which is simple, reliable, easy to use,
and easy to install that could notify not only by alarm, but also through SMS, which is
(2003), ultrasonic transmit coned shaped sound waves through the air. These pulses are
reflected by the liquid and received by the sensor. The time interval is converted to a
the liquid, a distinct advantage of this sensor type. It means that the sensor is not affected
sensor is that it is not affected by high flow rates making it appropriate for rivers and
lakes. Other advantages are low maintenance, can withstand freezing temperature, and
Agreeing to Tarulescu (2013), ultrasonic sensors are useful under poor lightning
conditions or when there are many transparent objects such as windows, glass as where
pulses to the sensor in his experiment. He also stated that the sonar ultrasonic sensor is
used in different types of applications due to low cost and high precision compared with
ultrasonic sensor with different presets distance by using plane obstacles with different
widths, and obstacles with triangular and circular cross-sections. The obstacles was
placed at 20 to 200 mm over the ultrasonic sensor, and the measurements was made at
According to the test shown in the article of Ausilio (2011), the Arduino UNO is
an accurate platform for a series of lab settings. However, the accuracy could depend on
the programing style, but the Arduino proved that it is robust enough to be accurate even
with poor programing. Their test showed an impressive accuracy, 1,000 trials led to the
same exact value. Their test results indicate a fairly high degree reliability. The test
showed that Arduino boards can be quite accurate in 1/0 tasks. In conclusion, the critical
advantage of the Arduino is mostly related to the large open-source community that has
flourished.
platform. As an open-source device, anyone could modify and program it by using simple
hardware and software. It lessen the expenses for programing microcontroller with high
reliability and expansion capability through add-on circuit boards (Fisher and Sui, 2013).
rapidly in recent years. Short Message Service of GSM is the valued-added service based
networks.
The coverage of the network is improved and the expensive network building and
maintenance cost can be saved for users because the GSM network can be interconnected
and roamed all over the country, it has strong network ability, the users has no need to
According to Huang et. al. (2010), GSM networks have advantages of mature
technology, wide covering area, long communication distance, and sound communication
effect and so on. The remote home security system they presented combines so many
advantages of WSN and GSM. Firstly, this system can send alarm short message to the
users through GSM networks immediately, informing people the possible dangerous
Su (2000) studied to design a new water level for irrigation water measurement to
transmission circuit, echo receiver circuit, data output circuit and micro control unit
(MCU) with specially designed transformer and a drive circuit based on the quality for
accepting circuit.
Conceptual Framework
Figure 1 shows the input-process-output of the study. For the input, consist of
description of Computerized Alarming Ultrasonic Water level Sensor with GSM module
in terms of materials used, cost, physical feature, and special feature. Testing of
Computerized Alarming Ultrasonic Water Level Sensor with GSM module in terms of
Product Development questionnaire, interview and testing will be used for the process.
For the output is expected to have a efficient Computerized Alarming Ultrasonic Water
The study aims to develop a new variety device of alarming water level sensor
with GSM that can aware the people in the status of water level on their bridge or flood.
1.2 cost,
2.2 durability?
3.1 functionality,
3.3 workmanship?
make things easier in monitoring water level to know when to conduct emergency
Community and students. This study will benefit the community as well as the
students becoming prepared during calamities such as floods; it is the fact that being
ready and aware can save one’s life. This device is a protective measure for people and
Future researchers. For the future researchers, the device could be further
This device is capable in measuring the water level of flood, water in dams, home
use of water leveling, and sending messages using Short Message Service(SMS) to
cellular phones whose number are inputted to device, The message contains the data of
water level which monitored by the system. It is capable of sensing the level using
ultrasonic sensor where place at the top and measures the water level. The system also
has alarming buzzer which is triggered when the water level is on the critical level. The
system also has a warning LED lights. There are 4 colors of light for different level
(Green for safe, Yellow for prepare, Orange for danger, and Red for critical)
This product is used only for floods and water dam purposes. It is used to measure
the level of the flood or water dam. It can measure a several meters but this is
programmed depending on the water level and depends where it is placed. When the
water level reached the critical level will trigger the alarm, this is the signal that you will
evacuate immediately. In water dams, if the alarm triggered the dam will release the
water all the way through the river. This is powered via 9 volt battery, USB power source,
or external power source. The product tends to use a solar panel but there are problems
when it comes to financial. The system also relies to GSM network for the information of
the water level. It submits a SMS message to the phone numbers for the information of
the water level. There will be a limitation if the message was not given because of
network error or blocked. This is not design for alternate transmission for SMS.
Definition of Terms
silicon wafers are turned into integrated circuits, (whatis.techtarget.com). In this study,
drive circuits are used to intact electrical components to make them solid.
system that is widely used in Europe and other parts of the world. GSM uses a variation
of time division multiple access (TDMA) and is the most widely used of the three
digital wireless telephony technologies (TDMA, GSM, and CDMA). GSM digitizes and
compresses data, then sends it down a channel with two other streams of user data, each
in its own time slot. It operates at either the 900 MHz or 1800 MHz frequency band,
the semiconductor material in LEDs. Polymers are chemical substances that consist of
large molecules that are, themselves, made from many smaller and simpler molecules:
proteins and DNA are examples of naturally occurring polymers; many others, such as
nylon, are artificially created. Because of their flexibility and strength, polymers are used
for products such as car bumpers and bullet-proof vests, (whatis.techtarget.com). In this
is used to drive the ultrasonic and GSM module according to the transmitted program.
another electrical output that is suitable for another electronic device. It Also knows as
Radar. Radar is an acronym for "radio detection and ranging." A radar system
frequency (RF) spectrum, and is used to detect the position and/or movement of objects.
Radar can track storm systems, because precipitation reflects electromagnetic fields at
certain frequencies. Radar can also render precise maps. Radar systems are widely used
Sensor. Sensor is a device that detects and responds to some type of input from
the physical environment. The specific input could be light, heat, motion, moisture,
pressure, or any one of a great number of other environmental phenomena. The output is
certain object.
SMS. SMS stands for Short Message Service and is also commonly referred to as
a "text message". With a SMS, you can send a message of up to 160 characters to another
device. Longer messages will automatically be split up into several parts. Most cell
this study, SMS is used as the type of message to be sent in a certain receiver based on
Ultrasonic. Ultrasonic vibrations of frequencies greater than the upper limit of the
audible range for humans—that is, greater than about 20 kilohertz. The term sonic is
such high frequencies, it is very difficult for a sound wave to propagate efficiently;
indeed, above a frequency of about 1.25 × 1013 hertz. It is impossible for longitudinal
waves to propagate at all, even in a liquid or a solid, because the molecules of the
material in which the waves are traveling cannot pass the vibration along rapidly enough,
level.
Chapter 2
This chapter presents the research design, research locale, respondents and
sampling technique, data gathering procedure, data analysis, and the product
development.
Research Design
and Surron (2006), it is a sequential design utilizing identical sample use to classify
mixed methods studies via two dimensional models. The study will use mixed method
because the researchers will use questionnaire and unstructured interview. The study is
Research Locale
This product was developed at Block 59, Lot 13, Bulaon Resettlement, City of
The study haved five (5) respondents. The respondents are one (1) Electronics
Engineer, one (1) Civil Engineer, one (1) Mechanical Engineer, one (1) Electrical Teacher
The study used purposive sampling procedure. According to Bernard (2002), the
technique that does not need set number of participants. Simply put what the researchers
wants to know and sets out to locate people who can and are willing to provide
more reliable in this study because the product is more likely to understand of certain
Research Instruments
To gather compatible data and information need to develop this product, the
proponent used survey questionnaire, unstructured interview, and testing of the product.
The survey questionnaire used is composed of product development and the general
data needed in improving the product during the development of the project.
Questionnaire
Part I deals on the materials in terms of: appropriate materials used in the product.
` Part II deals on the cost in terms of: the product is budget friendly to the users.
Part III deals on the physical feature in terms of: compact placement of the parts.
Part IV deals on the durability in terms of: 24/7 operation to monitor the water
Part V deals on the functionality in terms of: the function that the product must do
Part VI deals on the performance in terms of: the speed, accuracy, and the correct 12
Part VII deals on the workmanship in terms of: the reliability, stability, and the
Validation of Instrument
The questionnaire are validated by the expertise in the field of Research and
MAE and Alberto G. Gamboa, Ed. D. The questionnaire are validated and edited for its
suitability.
The researchers were given the permit to conduct a study from the Senior High
School Department. With the approval, the researchers personally distributed the
and effectiveness.
project.
Ethnical Consideration
The consent was secured by the researcher’s adviser. The entire essence of the
study was comprehensively interpreted by the proponents. Rest assured that all data will
Data Analysis
The study also made use of Likert Scale with its verbal description to interpret the
weighted mean.
Product Development
Alarming Ultrasonic Water Level Sensor with GSM Module design, the possibilities of
error, the program to be used, the availability of the materials, and the total cost of the
product. Brainstorming of ideas was conducted to predict the significance of the product.
Parts
Materials
Computer/Laptop
Arduino software
USB type A male to type B male cable
Soldering Iron
Solder led
Solder paste
Procedure
1. Connecting
3. Powering
17
Design Sketch
18
Schematic Diagram
unstructured interview to respondents. The testing of the product was conducted during
Budgetary Requirements
Chapter 3
This chapter presents the data gathered as well as their analysis and interpretation.
1.1 Functionality
This product measures any kind of liquid. The water level sensor gives
alarm when the water level is increasing, sends a SMS message if the water level reached
the critical level. Four LEDs green for stable, yellow for monitor, orange for, ready for
evacuation, and red for evacuate. It has two sensors which are ultrasonic and float sensor
1.2 Performance
the water level. Buzzer has a pattern of buzzing in different kinds of level to determine
1.3 Workmanship
This product lessen the struggle to inform people on what actually is the
1.4 Materials
The materials used for this study are Arduino Uno the microcontroller,
GSM module which sends SMS messages. LED lights (Red, Orange, Yellow, and Green).
A buzzer which is triggered. The Ultrasonic sensor and Float sensor that measures the
water level. A power supply composed of transformer that is connected to a circuit which
outputs are 12v and 5v. Connecting wires which connects the Led lights, Buzzer GSM
module, Transformer Ultrasonic sensor and Float sensor to the Arduino Uno.
1.5 Process
The process starts from programming the Arduino Uno to operate the
Ultrasonic sensor, Float sensor, GSM module, buzzer, and LEDs with corresponding pin
to be used. Then connecting the parts to the microcontroller and securing the product with
a plastic casing.
Table 5
Figure 4:
In table 5. Presents the findings about the description in terms of materials. In the 22
The materials of the water level sensor is in high rating. There are respondents
that commended the materials but there are who are not pleased enough.
“Ok” (R2)
Table 6
Figure 6:
the table shows that the cost of the water level sensor is budget friendly and it is
affordable..
The cost of the water level sensor is in high rating. There are respondents that
commended the materials but there are who are not pleased enough.
“Economical” (R3)
Table 7
Figure 7:
In table 7. Presents the findings about the description in terms of physical feature.
In the table shows that thephysical feature of the is good because the compact placement
The physical feature of the water level sensor is in high rating. There are
respondents that commended the materials but there are who are not pleased enough.
“Compact” (R3)
“Ok” (R4)
Table 8
Figure 8:
In table 8. Presents the findings about the description in terms of durability. In the
table shows that the it can function 24/7. It shows that the can last longer and can manage 24
more time.
The durability of the water level sensor is in middle rating. There are respondents
that commended the materials but there are who are not pleased enough.
Table 9
Figure 9:
the table shows that the buzzer it can gives alarm. It sends SMS because of the GSM
module. It measures the water level beacause of the ultrasonic sensor and float sensor.
The functionality of the water level sensor is in high rating. There are respondents 25
that commended the materials but there are who are not pleased enough.
“Appropriate” (R2)
Table 10
Figure 10:
In table 10. Presents the findings about the description in terms of performance.
In the table shows that the water level sensor gives a correct information because the
The performance of the water level sensor is in high rating. There are respondents
that commended the materials but there are who are not pleased enough.
“Acceptable” (R2)
Table 11
Figure 11:
In table 11. Presents the findings about the description in terms of performance.
In the table shows that the water level sensor has a stable condition because this attached
to a specific place and has a good condition. This is reliable in emergencies because it can
help the people prepare and get ready for a upcoming disaster.
The performance of the water level sensor is in high rating. There are respondents
that commended the materials but there are who are not pleased enough.
Chapter 4
This chapter presents the summary of the thesis entitled “Arduino Based Water
Level Sensor” as well as the conclusion, and recommendation based on the findings of
the study.
Summary
1. The parts used in the product are: Arduino Uno, SIM 800L GSM module,
Ultrasonic HC-SR04, Float sensor, Buzzer, 4 LEDs (Green, Yellow, Orange, and Red),
Transformer with a circuit which outputs are 12v and 5v, and a plastic casing.
type A male to type B male cable, Soldering iron, Solder lead, Solder paste.
3. Process is to program first the Arduino Uno to operate the sensors, buzzer, and
LEDs. Connect the parts to Arduino with the corresponding programmed pins. Power the
product by connecting the Arduino to 12v and GSM to 5v with the power supply that is
composed of transformer connected to a circuit which the outputs are 12v and 5v. Finally,
outstanding in verbal description. One respondent stated that it is acceptable and the other
28
one stated the product is high performance.
7. Cost has a weighted mean of 4.6 which was interpreted as outstanding. One
8. The materials has a weighted mean of 4.6 which was interpreted as outstanding.
9. The physical feature has a weighted mean of 4.6 which was interpreted as
outstanding.
10. The durability has a weighted mean of 3.8 which was interpreted as very
good. One respondent stated that it was not durable enough but passable for a prototype.
Conclusion
1. The materials and their cost are appropriate and affordable for the product to
function properly.
parts.
4. The durability is good enough for a prototype to sustain the 24/7 operation
29
capability.
lessen the work of officials on alarming the community as it was rated as outstanding in
performing its task as water level sensor that could notify not only by means of hearing
and sight, also by means of SMS to notify someone that will monitor, guide, and save the
community.
Recommendation:
The following are the recommendations for the further researchers to improve the
product:
1. Power source: make the product independent to a power source that even if
2. Casing: the casing must be water resistant to protect the vital parts from being
3. Sensor: the sensors are the crucial parts of the product, as much as possible,
microcontroller and further researchers can use the latest model of Arduino for faster,
flexible microcontroller.
REFERENCES
Ahonen, Tomi T. (January 13, 2011). "Time to Confirm Some Mobile User Numbers:
SMS, MMS, Mobile Internet, M-News". Communities Dominate Brands.
Retrieved 2016-09-27.
Alessandro D. A. “Arduino: A low-cost multipurpose lab equipment” 25 October 2011
Baofeng Su (2000) “Water Level Sensor based on a New Design Structure for Irrigation
Water Measurement”
Bernard, H.R. 2002. Research Methods in Anthropology: Qualitative and quantitative
methods. 3rd edition. AltaMira Press ,Walnut Creek, California.
Chen Peijiang, Jing Xuehua (2008) “Design and Implementation of Remote Monitoring
System Based on GSM”
Collins, K. M. T., Onwuegbuzie, A. J., & Sutton, I. L. (2006). A model incorporating the
rationale and purpose for conducting mixed methods research in special education
and beyond. Learning Disabilities: A Contemporary Journal, 4, 67-100.
Fisher, D. K., and R. Sui. 2013. An inexpensive open-source ultrasonic sensing system
for monitoring liquid levels. Agric Eng Int: CIGR Journal, 15(4): 328-334.
Geers R, Saatkamp H W, Goossens K (2001). “TETRAD: an on-line telematics
surveillance system for animal transports”, Computers and Electronics in
Agriculture, Vol. 21, no. 2, pp.107-116.
Huiping H., Shide X., Xiangyin M., Ying X. (2010) “A Remote Home Security System
Based on Wireless Sensor Network and GSM Technology “
McKinion J M, Turner S B, Willers J L (2004). “Wireless technology and satellite Intem
connectivity in precision agriculture”. Agricultural Systems, vol. 81, no. 3,
pp.201- 212.
Radu Tarulescu “Usage of parallax Ultrasonic sensors in distance measurements” May
2013
R. Tarulescu, S. Tarulescu, “Distance measurements with ultrasonic sensor DT020-1”,
Editura Universitatii din Oradea, ISSN 1583-0691, ANNALS of the ORADEA
UNIVERSITY, 2012;
searchmobilecomputing.techtarget.com/definition/GSM
searchmobilecomputing.techtarget.com/definition/radar
31
searchmobilecomputing.techtarget.com/definition/Short-Message-Service
www.britannica.com/science/ultrasonics
www.techopedia.com/definition/1756/power-supply
whatis.techtarget.com/definition/polymer-LED-light-emitting-polymer-or-polyLED
whatis.techtarget.com/definition/sensor
whatis.techtarget.com/search/query?q=drive+circuit
whatis.techtarget.com/search/query?q=microcontroller
32
Appendix A
Appendix B
MEMORANDUM OF AGREEMENT
Appendix C
LETTER TO VALIDATORS
Appendix D
VALIDATOR’s CERTIFICATE
Appendix E
LETTER TO STATISTICIAN
Appendix F
QUESTIONNAIRE
Appendix G
UNSTRUCTURED INTERVIEW
Appendix H
Activity
GANTT CHART
November December January February March June July August
Planning
Chapter 1
Chapter 2
Validation
process