Scalable Web Architecture

Dr. Dobb's | Building Scalable Web Architecture and Distributed Systems... http://www.drdobbs.com/article/print?articleId=240142422&siteSectio...
Building Scalable Web Architecture and Distributed Systems

Like most things in life, taking the time to plan ahead when building a Web service can help in
the long run.
December 31, 2012

URL:http://www.drdobbs.com/web-development/building-scalable-web-architecture-and-d/240142422
Open source software has become a fundamental building block for some of the biggest websites. And as
those websites have grown, best practices and guiding principles around their architectures have emerged.
This article seeks to cover some of the key issues to consider when designing large websites, as well as some
of the building blocks used to achieve these goals.
This article is largely focused on Web systems, although some of the material is applicable to other
distributed systems as well.
Principles of Web Distributed Systems Design
What exactly does it mean to build and operate a scalable Web site or application? At a primitive level it's
just connecting users with remote resources via the Internet — the part that makes it scalable is that the
resources, or access to those resources, are distributed across multiple servers.
Like most things in life, taking the time to plan ahead when building a Web service can help in the long run;
understanding some of the considerations and tradeoffs behind big websites can result in smarter decisions at
the creation of smaller Web sites. Below are some of the key principles that influence the design of large-
scale Web systems:
Availability: The uptime of a website is absolutely critical to the reputation and functionality of many
companies. For some of the larger online retail sites, being unavailable for even minutes can result in
thousands or millions of dollars in lost revenue, so designing their systems to be constantly available
and resilient to failure is both a fundamental business and a technology requirement. High availability
in distributed systems requires the careful consideration of redundancy for key components, rapid
recovery in the event of partial system failures, and graceful degradation when problems occur.
Performance: Website performance has become an important consideration for most sites. The speed
of a website affects usage and user satisfaction, as well as search engine rankings, a factor that directly
correlates to revenue and retention. As a result, creating a system that is optimized for fast responses
and low latency is key.
Reliability: A system needs to be reliable, such that a request for data will consistently return the same
data. In the event the data changes or is updated, then that same request should return the new data.
Users need to know that if something is written to the system, or stored, it will persist and can be relied
1 of 20 06-11-2018, 12:50
on to be in place for future retrieval.
Scalability: When it comes to any large distributed system, size is just one aspect of scale that needs to
be considered. Just as important is the effort required to increase capacity to handle greater amounts of
load, commonly referred to as the scalability of the system. Scalability can refer to many different
parameters of the system: how much additional traffic can it handle, how easy is it to add more storage
capacity, or even how many more transactions can be processed.
Manageability: Designing a system that is easy to operate is another important consideration. The
manageability of the system equates to the scalability of operations: maintenance and updates. Things
to consider for manageability are the ease of diagnosing and understanding problems when they occur,
ease of making updates or modifications, and how simple the system is to operate. (I.e., does it
routinely operate without failure or exceptions?)
Cost: Cost is an important factor. This obviously can include hardware and software costs, but it is also
important to consider other facets needed to deploy and maintain the system. The amount of developer
time the system takes to build, the amount of operational effort required to run the system, and even the
amount of training required should all be considered. Cost is the total cost of ownership.
Each of these principles provides the basis for decisions in designing a distributed Web architecture.
However, they also can be at odds with one another, such that achieving one objective comes at the cost of
another. A basic example: choosing to address capacity by simply adding more servers (scalability) can come
at the price of manageability (you have to operate an additional server) and cost (the price of the servers).
When designing any sort of Web application it is important to consider these key principles, even if it is to
acknowledge that a design may sacrifice one or more of them.
The Basics
When it comes to system architecture there are a few things to consider: what are the right pieces, how these
pieces fit together, and what are the right tradeoffs. Investing in scaling before it is needed is generally not a
smart business proposition; however, some forethought into the design can save substantial time and
resources in the future.
This discussion is focused on some of the core factors that are central to almost all large Web applications:
services, redundancy, partitions, and handling failure. Each of these factors involves choices and
compromises, particularly in the context of the principles described previously. In order to explain these in
detail it is best to start with an example.
Example: Image Hosting Application
At some point you have probably posted an image online. For big sites that host and deliver lots of images,
there are challenges in building an architecture that is cost-effective, highly available, and has low latency
(fast retrieval).
Imagine a system where users are able to upload their images to a central server, and the images can be
requested via a Web link or API, just like Flickr or Picasa. For the sake of simplicity, let's assume that this
application has two key parts: the ability to upload (write) an image to the server, and the ability to query for
an image. While we certainly want the upload to be efficient, we care most about having very fast delivery
when someone requests an image (for example, images could be requested for a Web page or other
application). This is very similar functionality to what a Web server or Content Delivery Network (CDN)
edge server (a server CDN uses to store content in many locations so content is geographically/physically
2 of 20 06-11-2018, 12:50
closer to users, resulting in faster performance) might provide.
Other important aspects of the system are:
There is no limit to the number of images that will be stored, so storage scalability, in terms of image
count needs to be considered.
There needs to be low latency for image downloads/requests.
If a user uploads an image, the image should always be there (data reliability for images).
The system should be easy to maintain (manageability).
Since image hosting doesn't have high profit margins, the system needs to be cost-effective
Figure 1 is a simplified diagram of the functionality.
Figure 1: Simplified architecture diagram for image hosting application.
In this image hosting example, the system must be perceivably fast, its data stored reliably and all of these
attributes highly scalable. Building a small version of this application would be trivial and easily hosted on a
single server; however, that would not be interesting for this article. Let's assume that we want to build
something that could grow as big as Flickr.
Services
When considering scalable system design, it helps to decouple functionality and think about each part of the
system as its own service with a clearly defined interface. In practice, systems designed in this way are said
to have a Service-Oriented Architecture (SOA). For these types of systems, each service has its own distinct
functional context, and interaction with anything outside of that context takes place through an abstract
interface, typically the public-facing API of another service.
Deconstructing a system into a set of complementary services decouples the operation of those pieces from
one another. This abstraction helps establish clear relationships between the service, its underlying
environment, and the consumers of that service. Creating these clear delineations can help isolate problems,
but also allows each piece to scale independently of one another. This sort of service-oriented design for
systems is very similar to object-oriented design for programming.
3 of 20 06-11-2018, 12:50
In our example, all requests to upload and retrieve images are processed by the same server; however, as the
system needs to scale it makes sense to break out these two functions into their own services.
Fast-forward and assume that the service is in heavy use; such a scenario makes it easy to see how longer
writes will impact the time it takes to read the images (since they two functions will be competing for shared
resources). Depending on the architecture this effect can be substantial. Even if the upload and download
speeds are the same (which is not true of most IP networks, since most are designed for at least a 3:1
download-speed:upload-speed ratio), read files will typically be read from cache, and writes will have to go
to disk eventually (and perhaps be written several times in eventually consistent situations). Even if
everything is in memory or read from disks (like SSDs), database writes will almost always be slower than
reads. (Pole Position, an open source tool for DB benchmarking, and results.)
Another potential problem with this design is that a Web server like Apache or lighttpd typically has an upper
limit on the number of simultaneous connections it can maintain (defaults are around 500, but can go much
higher) and in high traffic, writes can quickly consume all of those. Since reads can be asynchronous, or take
advantage of other performance optimizations like gzip compression or chunked transfer encoding, the Web
server can switch serve reads faster and switch between clients quickly serving many more requests per
second than the max number of connections (with Apache and max connections set to 500, it is not
uncommon to serve several thousand read requests per second). Writes, on the other hand, tend to maintain
an open connection for the duration for the upload, so uploading a 1MB file could take more than 1 second
on most home networks, so that Web server could only handle 500 such simultaneous writes.
Figure 2: Splitting out reads and writes..
Planning for this sort of bottleneck makes a good case to split out reads and writes of images into their own
services, shown in Figure 2. This allows us to scale each of them independently (since it is likely we will
always do more reading than writing), but also helps clarify what is going on at each point. Finally, this
separates future concerns, which would make it easier to troubleshoot and scale a problem like slow reads.
The advantage of this approach is that we are able to solve problems independently of one another — we
don't have to worry about writing and retrieving new images in the same context. Both of these services still
leverage the global corpus of images, but they are free to optimize their own performance with service-
appropriate methods (for example, queuing up requests, or caching popular images — more on this below).
And from a maintenance and cost perspective each service can scale independently as needed, which is great
because if they were combined and intermingled, one could inadvertently impact the performance of the other
as in the scenario discussed above.
4 of 20 06-11-2018, 12:50
Of course, the above example can work well when you have two different endpoints (in fact this is very
similar to several cloud storage providers' implementations and Content Delivery Networks). There are lots
of ways to address these types of bottlenecks though, and each has different tradeoffs.
For example, Flickr solves this read/write issue by distributing users across different shards such that each
shard can only handle a set number of users, and as users increase more shards are added to the cluster (see
the presentation on Flickr's scaling). In the first example it is easier to scale hardware based on actual usage
(the number of reads and writes across the whole system), whereas Flickr scales with their user base (but
forces the assumption of equal usage across users so there can be extra capacity). In the former an outage or
issue with one of the services brings down functionality across the whole system (no-one can write files, for
example), whereas an outage with one of Flickr's shards will only affect those users. In the first example it is
easier to perform operations across the whole dataset — for example, updating the write service to include
new metadata or searching across all image metadata — whereas with the Flickr architecture each shard
would need to be updated or searched (or a search service would need to be created to collate that metadata
— which is in fact what they do).
When it comes to these systems there is no right answer, but it helps to go back to the principles at the start of
this article, determine the system needs (heavy reads or writes or both, level of concurrency, queries across
the data set, ranges, sorts, etc.), benchmark different alternatives, understand how the system will fail, and
have a solid plan for when failure happens.
Redundancy
In order to handle failure gracefully a Web architecture must have redundancy of its services and data. For
example, if there is only one copy of a file stored on a single server, then losing that server means losing that
file. Losing data is seldom a good thing, and a common way of handling it is to create multiple, or redundant,
copies.
This same principle also applies to services. If there is a core piece of functionality for an application,
ensuring that multiple copies or versions are running simultaneously can secure against the failure of a single
node.
Creating redundancy in a system can remove single points of failure and provide a backup or spare
functionality if needed in a crisis. For example, if there are two instances of the same service running in
production, and one fails or degrades, the system can failover to the healthy copy. Failover can happen
automatically or require manual intervention.
Another key part of service redundancy is creating a shared-nothing architecture. With this architecture, each
node is able to operate independently of one another and there is no central "brain" managing state or
coordinating activities for the other nodes. This helps a lot with scalability since new nodes can be added
without special conditions or knowledge. However, and most importantly, there is no single point of failure in
these systems, so they are much more resilient to failure.
For example, in our image server application, all images would have redundant copies on another piece of
hardware somewhere (ideally in a different geographic location in the event of a catastrophe like an
earthquake or fire in the data center), and the services to access the images would be redundant, all
potentially servicing requests. (See Figure 3.) (Load balancers are a great way to make this possible, but there
is more on that below).
5 of 20 06-11-2018, 12:50
Figure 3: Image hosting application with redundancy
Partitions
There may be very large data sets that are unable to fit on a single server. It may also be the case that an
operation requires too many computing resources, diminishing performance and making it necessary to add
capacity. In either case you have two choices: scale vertically or horizontally.
Scaling vertically means adding more resources to an individual server. So for a very large data set, this
might mean adding more (or bigger) hard drives so a single server can contain the entire data set. In the case
of the compute operation, this could mean moving the computation to a bigger server with a faster CPU or
more memory. In each case, vertical scaling is accomplished by making the individual resource capable of
handling more on its own.
To scale horizontally, on the other hand, is to add more nodes. In the case of the large data set, this might be a
second server to store parts of the data set, and for the computing resource it would mean splitting the
operation or load across some additional nodes. To take full advantage of horizontal scaling, it should be
included as an intrinsic design principle of the system architecture, otherwise it can be quite cumbersome to
modify and separate out the context to make this possible.
When it comes to horizontal scaling, one of the more common techniques is to break up your services into
partitions, or shards. The partitions can be distributed such that each logical set of functionality is separate;
this could be done by geographic boundaries, or by another criteria like non-paying versus paying users. The
advantage of these schemes is that they provide a service or data store with added capacity.
In our image server example, it is possible that the single file server used to store images could be replaced
by multiple file servers, each containing its own unique set of images. (See Figure 4.) Such an architecture
would allow the system to fill each file server with images, adding additional servers as the disks become
full. The design would require a naming scheme that tied an image's filename to the server containing it. An
image's name could be formed from a consistent hashing scheme mapped across the servers. Or alternatively,
each image could be assigned an incremental ID, so that when a client makes a request for an image, the
image retrieval service only needs to maintain the range of IDs that are mapped to each of the servers (like an
index).
6 of 20 06-11-2018, 12:50
Figure 4: Image hosting application with redundancy and partitioning......
Of course there are challenges distributing data or functionality across multiple servers. One of the key issues
is data locality; in distributed systems the closer the data to the operation or point of computation, the better
the performance of the system. Therefore it is potentially problematic to have data spread across multiple
servers, as any time it is needed it may not be local, forcing the servers to perform a costly fetch of the
required information across the network.
Another potential issue comes in the form of inconsistency. When there are different services reading and
writing from a shared resource, potentially another service or data store, there is the chance for race
conditions — where some data is supposed to be updated, but the read happens prior to the update — and in
those cases the data is inconsistent. For example, in the image hosting scenario, a race condition could occur
if one client sent a request to update the dog image with a new title, changing it from "Dog" to "Gizmo", but
at the same time another client was reading the image. In that circumstance it is unclear which title, "Dog" or
"Gizmo", would be the one received by the second client.
There are certainly some obstacles associated with partitioning data, but partitioning allows each problem to
be split — by data, load, usage patterns, etc. — into manageable chunks. This can help with scalability and
manageability, but is not without risk. There are lots of ways to mitigate risk and handle failures; however, in
the interest of brevity they are not covered in this article. If you are interested in reading more, you can check
out my blog post on fault tolerance and monitoring.
The Building Blocks of Fast and Scalable Data Access
Having covered some of the core considerations in designing distributed systems, let's now talk about the
hard part: scaling access to the data.
Most simple Web applications, for example, LAMP stack applications, look something like Figure 5.
Figure 5: Simple Web applications
7 of 20 06-11-2018, 12:50
As they grow, there are two main challenges: scaling access to the app server and to the database. In a highly
scalable application design, the app (or Web) server is typically minimized and often embodies a shared-
nothing architecture. This makes the app server layer of the system horizontally scalable. As a result of this
design, the heavy lifting is pushed down the stack to the database server and supporting services; it's at this
layer where the real scaling and performance challenges come into play.
The rest of this article is devoted to some of the more common strategies and methods for making these types
of services fast and scalable by providing fast access to data.
Figure 6: Oversimplified Web application
Most systems can be oversimplified to Figure 6. This is a great place to start. If you have a lot of data, you
want fast and easy access, like keeping a stash of candy in the top drawer of your desk. Though overly
simplified, the previous statement hints at two hard problems: scalability of storage and fast access of data.
For the sake of this example, let's assume you have many terabytes (TB) of data and you want to allow users
to access small portions of that data at random. (See Figure 7.) This is similar to locating an image file
somewhere on the file server in the image application example.
Figure 7: Accessing specific data
This is particularly challenging because it can be very costly to load TBs of data into memory; this directly
translates to disk IO. Reading from disk is many times slower than from memory — memory access is as fast
as Chuck Norris, whereas disk access is slower than the line at the DMV. This speed difference really adds up
for large data sets; in real numbers memory access is as little as 6 times faster for sequential reads, or 100,000
times faster for random reads, than reading from disk (see The Pathologies of Big Data). Moreover, even with
unique IDs, solving the problem of knowing where to find that little bit of data can be an arduous task. It's
like trying to get that last Jolly Rancher from your candy stash without looking.
Thankfully there are many options that you can employ to make this easier; four of the more important ones
are caches, proxies, indexes and load balancers. The rest of this article discusses how each of these concepts
can be used to make data access a lot faster.
Caches
8 of 20 06-11-2018, 12:50
Caches take advantage of the locality of reference principle: recently requested data is likely to be requested
again. They are used in almost every layer of computing: hardware, operating systems, Web browsers, Web
applications and more. A cache is like short-term memory: it has a limited amount of space, but is typically
faster than the original data source and contains the most recently accessed items. Caches can exist at all
levels in architecture, but are often found at the level nearest to the front end, where they are implemented to
return data quickly without taxing downstream levels.
How can a cache be used to make your data access faster in our API example? In this case, there are a couple
of places you can insert a cache. One option is to insert a cache on your request layer node, as in Figure 8.
Figure 8: Inserting a cache on your request layer node
Placing a cache directly on a request layer node enables the local storage of response data. Each time a
request is made to the service, the node will quickly return local, cached data if it exists. If it is not in the
cache, the request node will query the data from disk. The cache on one request layer node could also be
located both in memory (which is very fast) and on the node's local disk (faster than going to network
storage).
9 of 20 06-11-2018, 12:50
Figure 9: Multiple caches
What happens when you expand this to many nodes? As you can see in Figure 9, if the request layer is
expanded to multiple nodes, it's still quite possible to have each node host its own cache. However, if your
load balancer randomly distributes requests across the nodes, the same request will go to different nodes, thus
increasing cache misses. Two choices for overcoming this hurdle are global caches and distributed caches.
Global Cache
A global cache is just as it sounds: all the nodes use the same single cache space. This involves adding a
server, or file store of some sort, faster than your original store and accessible by all the request layer nodes.
Each of the request nodes queries the cache in the same way it would a local one. This kind of caching
scheme can get a bit complicated because it is very easy to overwhelm a single cache as the number of clients
and requests increase, but is very effective in some architectures (particularly ones with specialized hardware
that make this global cache very fast, or that have a fixed dataset that needs to be cached).
There are two common forms of global caches depicted in the diagrams. In Figure 10, when a cached
response is not found in the cache, the cache itself becomes responsible for retrieving the missing piece of
data from the underlying store. In Figure 11 it is the responsibility of request nodes to retrieve any data that is
not found in the cache.
10 of 20 06-11-2018, 12:50
Figure 10: Global cache where cache is responsible for retrieval......
Figure 11: Global cache where request nodes are responsible for retrieval
The majority of applications leveraging global caches tend to use the first type, where the cache itself
manages eviction and fetching data to prevent a flood of requests for the same data from the clients.
However, there are some cases where the second implementation makes more sense. For example, if the
cache is being used for very large files, a low cache hit percentage would cause the cache buffer to become
overwhelmed with cache misses; in this situation it helps to have a large percentage of the total data set (or
hot data set) in the cache. Another example is an architecture where the files stored in the cache are static and
shouldn't be evicted. (This could be because of application requirements around that data latency — certain
pieces of data might need to be very fast for large data sets — where the application logic understands the
eviction strategy or hot spots better than the cache.)
Distributed Cache
In a distributed cache (Figure 12), each of its nodes own part of the cached data, so if a refrigerator acts as a
cache to the grocery store, a distributed cache is like putting your food in several locations — your fridge,
cupboards, and lunch box — convenient locations for retrieving snacks from, without a trip to the store.
11 of 20 06-11-2018, 12:50
Typically the cache is divided up using a consistent hashing function, such that if a request node is looking
for a certain piece of data it can quickly know where to look within the distributed cache to determine if that
data is available. In this case, each node has a small piece of the cache, and will then send a request to
another node for the data before going to the origin. Therefore, one of the advantages of a distributed cache is
the increased cache space that can be had just by adding nodes to the request pool.
A disadvantage of distributed caching is remedying a missing node. Some distributed caches get around this
by storing multiple copies of the data on different nodes; however, you can imagine how this logic can get
complicated quickly, especially when you add or remove nodes from the request layer. Although even if a
node disappears and part of the cache is lost, the requests will just pull from the origin — so it isn't
necessarily catastrophic!
Figure 12: Distributed cache
The great thing about caches is that they usually make things much faster (implemented correctly, of course!)
The methodology you choose just allows you to make it faster for even more requests. However, all this
caching comes at the cost of having to maintain additional storage space, typically in the form of expensive
memory; nothing is free. Caches are wonderful for making things generally faster, and moreover provide
system functionality under high load conditions when otherwise there would be complete service
degradation.
One example of a popular open source cache is Memcached (which can work both as a local cache and
distributed cache); however, there are many other options (including many language- or framework-specific
options).
Memcached is used in many large Web sites, and even though it can be very powerful, it is simply an in-
memory key value store, optimized for arbitrary data storage and fast lookups (O(1)).
12 of 20 06-11-2018, 12:50
Facebook uses several different types of caching to obtain their site performance (see "Facebook caching and
performance"). They use $GLOBALS and APC caching at the language level (provided in PHP at the cost of a
function call) which helps make intermediate function calls and results much faster. (Most languages have
these types of libraries to improve Web page performance and they should almost always be used.) Facebook
then use a global cache that is distributed across many servers (see "Scaling memcached at Facebook"), such
that one function call accessing the cache could make many requests in parallel for data stored on different
Memcached servers. This allows them to get much higher performance and throughput for their user profile
data, and have one central place to update data (which is important, since cache invalidation and maintaining
consistency can be challenging when you are running thousands of servers).
Now let's talk about what to do when the data isn't in the cache…
Proxies
At a basic level, a proxy server is an intermediate piece of hardware/software that receives requests from
clients and relays them to the backend origin servers. Typically, proxies are used to filter requests, log
requests, or sometimes transform requests (by adding/removing headers, encrypting/decrypting, or
compression).
Figure 13: Proxy server
Proxies are also immensely helpful when coordinating requests from multiple servers, providing
opportunities to optimize request traffic from a system-wide perspective. One way to use a proxy to speed up
data access is to collapse the same (or similar) requests together into one request, and then return the single
result to the requesting clients. This is known as collapsed forwarding.
Imagine there is a request for the same data (let's call it littleB) across several nodes, and that piece of data is
not in the cache. If that request is routed thought the proxy, then all of those requests can be collapsed into
one, which means we only have to read littleB off disk once. (See Figure 14.) There is some cost associated
with this design, since each request can have slightly higher latency, and some requests may be slightly
delayed to be grouped with similar ones. But it will improve performance in high load situations, particularly
when that same data is requested over and over. This is similar to a cache, but instead of storing the
data/document like a cache, it is optimizing the requests or calls for those documents and acting as a proxy
for those clients.
In a LAN proxy, for example, the clients do not need their own IPs to connect to the Internet, and the LAN
will collapse calls from the clients for the same content. It is easy to get confused here though, since many
proxies are also caches (as it is a very logical place to put a cache), but not all caches act as proxies.
13 of 20 06-11-2018, 12:50
Figure 14: Using a proxy server to collapse requests
Another great way to use the proxy is to not just collapse requests for the same data, but also to collapse
requests for data that is spatially close together in the origin store (consecutively on disk). Employing such a
strategy maximizes data locality for the requests, which can result in decreased request latency. For example,
let's say a bunch of nodes request parts of B: partB1, partB2, etc. We can set up our proxy to recognize the
spatial locality of the individual requests, collapsing them into a single request and returning only bigB,
greatly minimizing the reads from the data origin. (See Figure 15.) This can make a really big difference in
request time when you are randomly accessing across TBs of data! Proxies are especially helpful under high
load situations, or when you have limited caching, since they can essentially batch several requests into one.
Figure 15: Using a proxy to collapse requests for data that is spatially close together
It is worth noting that you can use proxies and caches together, but generally it is best to put the cache in
front of the proxy, for the same reason that it is best to let the faster runners start first in a crowded marathon
race. This is because the cache is serving data from memory, it is very fast, and it doesn't mind multiple
requests for the same result. But if the cache was located on the other side of the proxy server, then there
would be additional latency with every request before the cache, and this could hinder performance.
If you are looking at adding a proxy to your systems, there are many options to consider; Squid and Varnish
have both been road tested and are widely used in many production Web sites. These proxy solutions offer
many optimizations to make the most of client-server communication. Installing one of these as a reverse
proxy (explained in the load balancers section) at the Web server layer can improve Web server performance
considerably, reducing the amount of work required to handle incoming client requests.
Indexes
Using an index to access your data quickly is a well-known strategy for optimizing data access performance;
probably the most well known when it comes to databases. An index makes the trade-offs of increased
storage overhead and slower writes (since you must both write the data and update the index) for the benefit
of faster reads.
Just as to a traditional relational data store, you can also apply this concept to larger data sets. The trick with
indexes is you must carefully consider how users will access your data. In the case of data sets that are many
14 of 20 06-11-2018, 12:50
TBs in size, but with very small payloads (e.g., 1 KB), indexes are a necessity for optimizing data access.
Finding a small payload in such a large data set can be a real challenge since you can't possibly iterate over
that much data in any reasonable time. Furthermore, it is very likely that such a large data set is spread over
several (or many!) physical devices — this means you need some way to find the correct physical location of
the desired data. Indexes are the best way to do this.
Figure 16: Indexes......
An index can be used like a table of contents that directs you to the location where your data lives. For
example, let's say you are looking for a piece of data, part 2 of B — how will you know where to find it? If
you have an index that is sorted by data type — say data A, B, C — it would tell you the location of data B at
the origin. Then you just have to seek to that location and read the part of B you want. (See Figure 16.)
These indexes are often stored in memory, or somewhere very local to the incoming client request. Berkeley
DBs (BDBs) and tree-like data structures are commonly used to store data in ordered lists, ideal for access
with an index.
Often there are many layers of indexes that serve as a map, moving you from one location to the next, and so
forth, until you get the specific piece of data you want. (See Figure 17.)
Figure 17: Many layers of indexes
Indexes can also be used to create several different views of the same data. For large data sets, this is a great
way to define different filters and sorts without resorting to creating many additional copies of the data.
For example, imagine that the image hosting system from earlier is actually hosting images of book pages,
and the service allows client queries across the text in those images, searching all the book content about a
15 of 20 06-11-2018, 12:50
topic, in the same way search engines allow you to search HTML content. In this case, all those book images
take many, many servers to store the files, and finding one page to render to the user can be a bit involved.
First, inverse indexes to query for arbitrary words and word tuples need to be easily accessible; then there is
the challenge of navigating to the exact page and location within that book, and retrieving the right image for
the results. So in this case the inverted index would map to a location (such as book B), and then B may
contain an index with all the words, locations and number of occurrences in each part.
An inverted index, which could represent Index1 in the diagram above, might look something like the
following — each word or tuple of words provide an index of what books contain them.
>
Word(s) Book(s)
being awesome Book B, Book C, Book D
always Book C, Book F
believe Book B
The intermediate index would look similar but would contain just the words, location, and information for
book B. This nested index architecture allows each of these indexes to take up less space than if all of that
info had to be stored into one big inverted index.
And this is key in large-scale systems because even compressed, these indexes can get quite big and
expensive to store. In this system if we assume we have a lot of the books in the world — 100,000,000 (see
Inside Google Books blog post) — and that each book is only 10 pages long (to make the math easier), with
250 words per page, that means there are 250 billion words. If we assume an average of 5 characters per
word, and each character takes 8 bits (or 1 byte, even though some characters are 2 bytes), so 5 bytes per
word, then an index containing only each word once is over a terabyte of storage. So you can see creating
indexes that have a lot of other information like tuples of words, locations for the data, and counts of
occurrences, can add up very quickly.
Creating these intermediate indexes and representing the data in smaller sections makes big data problems
tractable. Data can be spread across many servers and still accessed quickly. Indexes are a cornerstone of
information retrieval, and the basis for today's modern search engines. Of course, this discussion only
scratched the surface, and there is a lot of research being done on how to make indexes smaller, faster,
contain more information (like relevancy), and update seamlessly. (There are some manageability challenges
with race conditions, and with the sheer number of updates required to add new data or change existing data,
particularly in the event where relevancy or scoring is involved).
Being able to find your data quickly and easily is important; indexes are an effective and simple tool to
achieve this.
Load Balancers
Finally, another critical piece of any distributed system is a load balancer. Load balancers are a principal part
of any architecture, as their role is to distribute load across a set of nodes responsible for servicing requests.
This allows multiple nodes to transparently service the same function in a system. (See Figure 18.) Their
main purpose is to handle a lot of simultaneous connections and route those connections to one of the request
nodes, allowing the system to scale to service more requests by just adding nodes.
16 of 20 06-11-2018, 12:50
Figure 18: Load balancer
There are many different algorithms that can be used to service requests, including picking a random node,
round robin, or even selecting the node based on certain criteria, such as memory or CPU utilization. Load
balancers can be implemented as software or hardware appliances. One open source software load balancer
that has received wide adoption is HAProxy).
In a distributed system, load balancers are often found at the very front of the system, such that all incoming
requests are routed accordingly. In a complex distributed system, it is not uncommon for a request to be
routed to multiple load balancers as shown in Figure 19.
Figure 19: Multiple load balancers
Like proxies, some load balancers can also route a request differently depending on the type of request it is.
(Technically these are also known as reverse proxies.)
One of the challenges with load balancers is managing user-session-specific data. In an e-commerce site,
when you only have one client it is very easy to allow users to put things in their shopping cart and persist
those contents between visits (which is important, because it is much more likely you will sell the product if
it is still in the user's cart when they return). However, if a user is routed to one node for a session, and then a
different node on their next visit, there can be inconsistencies since the new node may be missing that user's
cart contents. (Wouldn't you be upset if you put a 6 pack of Mountain Dew in your cart and then came back
and it was empty?) One way around this can be to make sessions sticky so that the user is always routed to
the same node, but then it is very hard to take advantage of some reliability features like automatic failover.
In this case, the user's shopping cart would always have the contents, but if their sticky node became
unavailable there would need to be a special case and the assumption of the contents being there would no
longer be valid (although hopefully this assumption wouldn't be built into the application). Of course, this
problem can be solved using other strategies and tools in this article, like services, and many not covered
(like browser caches, cookies, and URL rewriting).
If a system only has a couple of a nodes, systems like round robin DNS may make more sense since load
balancers can be expensive and add an unneeded layer of complexity. Of course in larger systems there are all
sorts of different scheduling and load-balancing algorithms, including simple ones like random choice or
round robin, and more sophisticated mechanisms that take things like utilization and capacity into
17 of 20 06-11-2018, 12:50
consideration. All of these algorithms allow traffic and requests to be distributed, and can provide helpful
reliability tools like automatic failover, or automatic removal of a bad node (such as when it becomes
unresponsive). However, these advanced features can make problem diagnosis cumbersome. For example,
when it comes to high load situations, load balancers will remove nodes that may be slow or timing out
(because of too many requests), but that only exacerbates the situation for the other nodes. In these cases
extensive monitoring is important, because overall system traffic and throughput may look like it is
decreasing (since the nodes are serving less requests) but the individual nodes are becoming maxed out.
Load balancers are an easy way to allow you to expand system capacity, and like the other techniques in this
article, play an essential role in distributed system architecture. Load balancers also provide the critical
function of being able to test the health of a node, such that if a node is unresponsive or over-loaded, it can be
removed from the pool handling requests, taking advantage of the redundancy of different nodes in your
system.
Queues
So far we have covered a lot of ways to read data quickly, but another important part of scaling the data layer
is effective management of writes. When systems are simple, with minimal processing loads and small
databases, writes can be predictably fast; however, in more complex systems writes can take an almost non-
deterministically long time. For example, data may have to be written several places on different servers or
indexes, or the system could just be under high load. In the cases where writes, or any task for that matter,
may take a long time, achieving performance and availability requires building asynchrony into the system; a
common way to do that is with queues.
Figure 20: Synchronous request
Imagine a system where each client is requesting a task to be remotely serviced. Each of these clients sends
their request to the server, where the server completes the tasks as quickly as possible and returns the results
to their respective clients. In small systems where one server (or logical service) can service incoming clients
just as fast as they come, this sort of situation should work just fine. However, when the server receives more
requests than it can handle, then each client is forced to wait for the other clients' requests to complete before
a response can be generated. This is an example of a synchronous request, depicted in Figure 20.
18 of 20 06-11-2018, 12:50
This kind of synchronous behavior can severely degrade client performance; the client is forced to wait,
effectively performing zero work, until its request can be answered. Adding additional servers to address
system load does not solve the problem either; even with effective load balancing in place it is extremely
difficult to ensure the even and fair distribution of work required to maximize client performance. Further, if
the server handling requests is unavailable, or fails, then the clients upstream will also fail. Solving this
problem effectively requires abstraction between the client's request and the actual work performed to service
it.
Figure 21: Using queues to manage requests
Enter queues. A queue is as simple as it sounds: a task comes in, is added to the queue and then workers pick
up the next task as they have the capacity to process it. (See Figure 21.) These tasks could represent simple
writes to a database, or something as complex as generating a thumbnail preview image for a document.
When a client submits task requests to a queue they are no longer forced to wait for the results; instead they
need only acknowledgement that the request was properly received. This acknowledgement can later serve as
a reference for the results of the work when the client requires it.
Queues enable clients to work in an asynchronous manner, providing a strategic abstraction of a client's
request and its response. On the other hand, in a synchronous system, there is no differentiation between
request and reply, and they therefore cannot be managed separately. In an asynchronous system the client
requests a task, the service responds with a message acknowledging the task was received, and then the client
can periodically check the status of the task, only requesting the result once it has completed. While the client
is waiting for an asynchronous request to be completed it is free to perform other work, even making
asynchronous requests of other services. The latter is an example of how queues and messages are leveraged
in distributed systems.
Queues also provide some protection from service outages and failures. For instance, it is quite easy to create
a highly robust queue that can retry service requests that have failed due to transient server failures. It is more
preferable to use a queue to enforce quality-of-service guarantees than to expose clients directly to
intermittent service outages, requiring complicated and often-inconsistent client-side error handling.
Queues are fundamental in managing distributed communication between different parts of any large-scale
distributed system, and there are lots of ways to implement them. There are quite a few open source queues
like RabbitMQ, ActiveMQ, BeanstalkD, but some also use services like Zookeeper, or even data stores like
Redis.
Conclusion
19 of 20 06-11-2018, 12:50
Designing efficient systems with fast access to lots of data is exciting, and there are lots of great tools that
enable all kinds of new applications. This article covered just a few examples, barely scratching the surface,
but there are many more — and there will only continue to be more innovation in the space. This work is
made available under the Creative Commons Attribution 3.0 Unported. Please see the full description of the
license for details at http://creativecommons.org/licenses/by/3.0/legalcode. This article was excerpted with
permission from The Architecture of Open Source Applications, Volume II.
Kate Matsudaira has worked as the VP Engineering/CTO at several technology startups, including currently
at Decide, and formerly at SEOmoz and Delve Networks (acquired by Limelight). Prior to joining the startup
world she spent time as a software engineer and technical lead/manager at Amazon and Microsoft. You can
read more on her blog and website.
Terms of Service | Privacy Statement | Copyright © 2018 UBM Tech, All rights reserved.
20 of 20 06-11-2018, 12:50

Scalable Web Architecture

Uploaded by

Copyright:

Available Formats

Scalable Web Architecture

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Scalable Web Architecture

Uploaded by

Copyright:

Available Formats

Dr. Dobb's | Building Scalable Web Architecture and Distributed Systems... http://www.drdobbs.com/article/print?articleId=240142422&siteSectio...

Building Scalable Web Architecture and Distributed Systems

December 31, 2012

Principles of Web Distributed Systems Design

on to be in place for future retrieval.

Example: Image Hosting Application

closer to users, resulting in faster performance) might provide.

Other important aspects of the system are:

There needs to be low latency for image downloads/requests.

The system should be easy to maintain (manageability).

Figure 1 is a simplified diagram of the functionality.

Figure 1: Simplified architecture diagram for image hosting application.

Figure 2: Splitting out reads and writes..

Figure 3: Image hosting application with redundancy

Figure 4: Image hosting application with redundancy and partitioning......

The Building Blocks of Fast and Scalable Data Access

Figure 5: Simple Web applications

Figure 6: Oversimplified Web application

Figure 7: Accessing specific data

Figure 8: Inserting a cache on your request layer node

Figure 9: Multiple caches

Figure 10: Global cache where cache is responsible for retrieval......

Figure 12: Distributed cache

Figure 13: Proxy server

Figure 14: Using a proxy server to collapse requests

Figure 16: Indexes......

Figure 17: Many layers of indexes

Figure 18: Load balancer

Figure 19: Multiple load balancers

Figure 20: Synchronous request

Figure 21: Using queues to manage requests

You might also like