Little Green Book

Capral Aluminium Centres are a one stop
trade centre offering retail and wholesale

customers aluminium geometric extrusions,
machine rod, plate and aluminium sheet
products. The little Green Book has been
produced for the local tradesman who
can at a glace look up a particular product
within the product reference manual.
It’s small enough to fit in your tool box,
glove box or back pocket and handy to
have with you wherever you go. Products in
the Little Green Capral Book are either
stocked or available to order from Capral
Aluminium Centres for distribution to your
specific delivery point - delivery charges
may apply.
1
97
Capral at a Glance 5
Angles 13
Channels 19
Tee Sections 23
Flat Bars 25
Rectangular Hollows 29
Square Solid 33
Square Hollows 35
Tubes 39
Drawn Tube 43
Round Bar 45
Machine Rod 47
Moulds and Trims 51
Qubelok Extrusion 55
Qubelok Accessories 59
Seating and accessories 61
Scaffold Plank 65
Coolroom & Portable Buildings 67
Sheet and Plate 71
Sheet/Plate 5005 72
Sheet/Plate 5251/5052 73
Sheet/Plate 5083 73
Treadplate 5-Bar 74
Treadplate Propelor Bright Finish 74
Advantages of Aluminium 75
Conditions of Sale 84
Notes 92
3
With a history spanning over 75 years, Capral is the
largest manufacturer and distributor of aluminium
products located in Australia. Capral’s manufacturing
footprint includes the largest extrusion facility in the
Southern Hemisphere at its Bundamba operation in
Queensland. In addition, extrusion manufacturing
facilities are also located in Victoria, New South Wales,
South Australia and Western Australia, all supplying
world class products at short lead times.
Capral’s extensive metropolitan and regional distribution
network services a wide range of industries including
residential and commercial construction, transport,
marine and general engineering. Regional distribution
centres support a network of conveniently located trade
centres called ‘Capral Aluminium Centres’ operating
throughout metropolitan and regional Australia
supplying a wide range of geometric extrusions,
machine rod, plate and aluminium sheet products.
5
Capral Heritage
Capral is Australia’s largest manufacturer of aluminium products with
a history of investing in Australian industry for over 75 years. Capral
understands the Australian market and its environmental conditions and
this has made it Australia’s leading designer, manufacturer and distributor
of aluminium extrusions.
Special Extruded Products

Capral has the capability to design, produce and stock our customer’s own
sections. Our extrusion manufacturing facilities can provide technical
information along with in-house facilities to help design and produce extruded
profiles specific to our customer’s needs.
Our extrusion manufacturing facilities produce profiles to the highest quality
for use in numerous applications, such as architectural, automotive, marine,
electrical, general engineering, road and transport.
A typical route from conception to section:
• Customer product requirement in the form of a rough drawing.
• Design development utilising CAD/CAM technology.
• Die print/drawing produced and then approved by customer.
• Die produced and sample section extruded.
• Bulk material is extruded once off-tool sample approved.
Accreditation and Certification

All extrusions manufactured by Capral are produced to the chemical
composition, mechanical property and dimensional tolerances in AS/NZS
1866:1997. Capral is also accredited to:
• AS/NZS ISO 9001:2008 - Quality Management Systems.
• AS/NZS ISO 14001:2004 - Environmental Management Systems.
• ISO/IEC 17025 - NATA Accredited Mechanical Testing Laboratory.
• All major international marine classification societies including DNV
(Det Norske Veritas) and Lloyds Register.
Aluminium The Super Metal

Innovation drives our world. New developments and technologies spur a
constant search for new and improved materials to satisfy the limits of our
imagination, yet few to date have surpassed the sheer versatility of aluminium.
Aluminium is corrosion resistant, strong, lightweight and long lasting.
It is a metal which may be cast, rolled, drawn or extruded and may be
finished by polishing, anodising or coating to achieve a myriad of visual
and functional effects.
7
Consider its abundance, affordability, corrosion resistance and adaptability
and you begin to appreciate how truly remarkable aluminium is compared
Alloy Characteristics
to other metals.
Extruded Products
Most importantly, being readily recyclable and with one of the highest Forms Available
recycling rates of any metal, aluminium is an environmentally sustainable Characteristics
material. Forms Available Drawn
Corrosion Resistance
Typical
Application
Aluminium Uses Alloy
Hollow Shapes
Heat Treatable
Solid Shapes
Rod and Bar
Rod and Bar

Aluminium is the material of choice for an array of applications from building
Machining
Anodising
Welding
Forming
and construction materials, consumer products, electronics and aeronautics
Tube
Tube
just to name a few.
You will find aluminium in safety components of your car, from the seat belt Most commonly used
assembly to the anti-lock braking system. You will find it in other places too, extrusion alloy.
your kitchen appliances, your pots and pans, your mobile phone or even in 6060 Architectural and A CC A AC A Yes
the next aeroplane you fly in. The applications for aluminium span almost general purpose.
every major industry. Structural alloy with
Its strength to weight ratio allows products to be lighter, stronger and medium weld strength
6061 and good corrosion B BC B AC A Yes
more efficient.
resistance.
Its corrosion resistant properties lend itself to harsh environments, providing
low maintenance solutions and ensuring extended product lifecycles. Structural
6005A applications, AA BC B AC A Yes
The many forms aluminium alloys can take, allow it equally to being cast transport, marine.
into forms, drawn into tube or strand applications, extruded into intricate
General purpose and
profiles or rolled into heavy plate or ultra-thin foils. In fact it’s hard to 6106 light structural. A CB A AC A Yes
imagine how different our lives would be without aluminium.
Commercial
Drawings 6262 machining alloy with E E B AA B AC A Yes
good anodising.
Drawings shown in this product reference manual are generally not to scale
and are an indication of the general shape and/or major dimensions. If you Heavy duty structures
require full scale, full dimensioned drawings with tolerance details, please with good corrosion
contact your nearest Capral Aluminium Centre for assistance. 6082 resistance and medium AB BC B AC A Yes
weld strength.
Transport, marine etc
Abbreviations
T = Thickness/gauge Trims requiring
6463A decorative finishing E E A C A A A Yes
W = Width
L = Length
Relative ratings are in decreasing order of merit = A,B,C, D.
Kg = Kilogram E = Special enquiry needed to clarify application.
M = Metres NR = Not recommended.
mm = Millimetres Where applicable, ratings for both annealed and hardest temper are given, e.g. A, C. Rating indicates suitability of alloy for
decorative quality anodising, all aluminium alloys can be anodised for increased corrosion and wear resistance.
9
Rolled Products Rolled Products
Forms Available Characteristics Forms Available Characteristics
Typical Typical
Application
Heat Treatable
Application
Heat Treatable
Circles Blanks
Alloy
Circles Blanks
Alloy
Coiled Sheet
Coiled Sheet
Machinging
Machinging
Anodising
Flat Sheet
Anodising
Flat Sheet
Welding
Forming
Welding
Forming
Plate
Plate
Chemical and process plant, and Specially developed for the
1050 AA DC BB AD AA No marine industry.
equipment. AC CB CC AC A No
5383 Similar characteristics to 5083
Commercial pure aluminium. with enhanced weldability.
Uses include cooking utensils,
packing containers, building Welded structures, pressure
1200 AA DC BB AC BA No
components (not stressed) and vessels for use
domestic appliances. 5454 AA CB CC AC BA No
at elevated temperatures,
Deep drawing quality available. marine applications.
A stronger alloy than 1200.
5005 This is a general purpose alloy AA DC BB AC BA No Structural applications where
suitable to welding. 6061 corrosion resistance is required, BB BC BB AC BA Yes
Transport, marine.
Sheet metal work, appliances,
5052 AA CB CC AC BA No
marine applications.
Relative ratings are in decreasing order of merit = A, B, C, D (where A = most applicable).
Two ratings: e.g. AC are for annealed and hardest tempers.
Used in high strength structural
applications principally in the
5083 form of sheet and plate for AC CB CC AC BA No
welded marine applications and
road transport vehicles.
A medium strength alloy with

reasonable ductility-work
hardens rapidly. Very suitable for
welding with a high corrosion
resistance, particularly in marine
5251 AA CB CC AC BA No
atmospheres. Uses include boats,
panelling and pressings for
transport, boxes and containers.
Suitable for applications
specifying 5052.
Relative ratings are in decreasing order of merit = A, B, C, D (where A = most applicable).

Two ratings: e.g. AC are for annealed and hardest tempers.
11
Additional Information
Pickup: Free pick up during business hours only at Capral Aluminium
Centres.
Packaging: Capral Aluminium Centres provide top quality cardboard
packing which is adequate for normal transport methods. If a particular
transport method is nominated by the Purchaser, this packaging must be
nominated on the purchasers order and will be charged to the purchaser.
Delivery: The method of packaging and shipment of the goods will be
designated by Capral. Charges to the purchaser’s account may be made
where other methods are requested by the purchaser. Unless stated
otherwise on specific product data, the following delivery terms will apply:
1. All orders from Capral Aluminium Centres will be at the purchaser’s
option:
(a) Delivered to the purchasers address if within Capral’s Aluminium
Centres normal metropolitan delivery area for the nominated delivery
charge per order
(b) Collected by the Customer or his authorised representative from the
Capral Aluminium Centre. Twenty four hour notice of intention to
collect may be required.
2. If it is necessary for Capral Aluminium Centre to split an order into more
than one delivery, only the nominated delivery charge will apply.
3. Request for delivery by a mode of transport, or to a destination, not
covered in 1. above, will be subject to special enquiry.
Prices subject to quotation: Written quotations for specific projects or
products not covered by the Capral standard price list will be held firm for
thirty (30) days from the quotation date.
Capral reserves the right to revise any quotation not accepted within
Angles
the (30) day period.
Orders from products subject to quotation will be delivered in accordance
with the Capral delivery schedule operating at the time the order is
placed. If the purchaser requests a deferment of delivery, then Capral will
invoice the purchaser for the goods at the time they are ready for
delivery.
12
Angles
Material A B T R1 Alloy/ Nom
Die No Lm AP PP Finish
No. mm mm mm mm Temp Mass
813623 EK9102 12 12 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.624
813626 EK9103 12 12 3 – 6.5 100 100 Mill Finish 6060 T5 1.111
813586 EB1118 16 16 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.858
813627 EK9104 16 16 3 – 6.5 100 100 Mill Finish 6060 T5 1.527
813631 EK9105 20 12 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.845
841398 EK9106 20 12 3 – 6.5 100 100 Mill Finish 6060 T5 1.527
A
813637 EK9107 20 20 1.6 – 6.5 100 100 Mill Finish 6060 T5 1.073
813640 EK9108 20 20 3 – 6.5 100 100 Mill Finish 6060 T5 1.95
R1 813645
815393
EK9109
EK9110
25
25
12
12
1.6
3
–
–
6.5 100
6.5 100
100
100
Mill Finish 6060 T5 0.995
813650 EK9111 25 20 1.6 – 6.5 100 100 Mill Finish 6060 T5 1.216
T 813653
813740
EK9112
EK9216
25
25
20
25
3
1.6
–
–
6.5 100
6.5 100
100
100
B 813746
850349
EK9217
EU2611
25
25
25
25
3
6
–
–
6.5 100
6.5 100
100
100
813657 EK9114 32 20 1.6 – 6.5 104 100 Mill Finish 6060 T5 1.417
813658 EK9116 32 20 3 – 6.5 103 103 Mill Finish 6060 T5 2.581
841418 EK9117 32 25 3 – 6.5 114 114 Mill Finish 6060 T5 2.841
810936 EB1126 32 32 1.6 – 6.5 128 128 Mill Finish 6060 T5 1.755
813662 EK9118 32 32 3 – 6.5 128 128 Mill Finish 6060 T5 3.211

© Capral Limited May 2014
15
Angles continued
Material A B T R1 Alloy/ Nom Material A B T R1 Alloy/ Nom
Die No Lm AP PP Finish Die No Lm AP PP Finish
No. mm mm mm mm Temp Mass No. mm mm mm mm Temp Mass
807782 E20434 40 12 1.6 – 6.5 104 104 Mill Finish 6060 T5 1.417 810977 EG6419 50.8 50.8 6.4 RAD 5.5 201 201 Mill Finish 6061 T6 9.102
841428 EK9120 40 12 3 – 6.5 103 103 Mill Finish 6060 T5 2.581 840368 EB1155 60 25 3 – 6.5 169 169 Mill Finish 6060 T5 4.316
813752 EL3257 40 20 1.6 – 6.5 119 119 Mill Finish 6060 T5 1.638 809503 E20560 60 40 4 – 6.5 198 198 Mill Finish 6060 T5 6.714
813663 EK9121 40 20 3 RAD 6.5 119 119 Mill Finish 6060 T5 3.003 813699 EK9135 60 60 3 – 6.5 240 240 Mill Finish 6060 T5 6.162
813792 EL8124 40 25 1.6 – 6.5 129 129 Mill Finish 6060 T5 1.774 841483 EK9136 60 60 6 – 6.5 240 240 Mill Finish 6060 T5 12.006
813665 EK9122 40 25 3 – 6.5 130 130 Mill Finish 6060 T5 3.263 810100 E34019 70 20 1.6 – 6.5 180 177 Mill Finish 6060 T5 2.476
813672 EK9123 40 40 1.6 – 6.5 160 160 Mill Finish 6060 T5 2.197 843047 EN5714 70 25 1.6 – 6.5 190 190 Mill Finish 6060 T5 2.613
813676 EK9124 40 40 3 – 6.5 160 160 Mill Finish 6060 T5 4.056 815581 EN7492 70 40 1.6 – 6.5 220 220 Mill Finish 6060 T5 3.036
811106 EK9127 50 12 3 – 6.5 124 124 Mill Finish 6060 T5 3.107 808398 E03237 76.2 25.4 3.2 – 6.5 203 203 Mill Finish 6060 T5 5.479
810102 E34020 50 20 1.6 – 6.5 140 137 Mill Finish 6060 T5 1.911 841100 EG6410 76.2 50.8 6.35 RAD 5.5 251 251 Mill Finish 6061 T6 11.523
841457 EK9128 50 20 3 – 6.5 140 140 Mill Finish 6060 T5 3.53 808143 E06168 76.2 76.2 3.2 – 6.5 305 305 Mill Finish 6060 T5 8.313
813684 EK9129 50 25 1.6 – 6.5 149 149 Mill Finish 6060 T5 2.06 841094 EG6408 76.2 76.2 6.35 RAD 5.5 301 301 Mill Finish 6061 T6 13.959
813687 EK9130 50 25 3 – 6.5 150 150 Mill Finish 6060 T5 3.789 841093 EG6407 76.2 76.2 9.52 RAD 5.5 302 302 Mill Finish 6061 T6 20.389
841461 EK9131 50 40 3 – 6.5 180 180 Mill Finish 6060 T5 4.582 813700 EK9137 80 20 3 – 6.5 199 199 Mill Finish 6060 T5 5.109
807916 EL9417 50 50 1.6 – 6.5 199 199 Mill Finish 6060 T5 2.763 808489 E20559 80 50 2.5 – 6.5 260 260 Mill Finish 6060 T5 5.596
813690 EK9132 50 50 3 – 6.5 200 200 Mill Finish 6060 T5 5.109 817737 EN5324 80 50 6 RAD 6 258 258 Mill Finish 6061 T6 12.108
813692 EK9133 50 50 4 – 6.5 200 200 Mill Finish 6060 T5 6.74 809497 E20536 80 80 4 – 6.5 320 320 Mill Finish 6060 T5 10.952
813696 EK9134 50 50 6 – 6.5 200 200 Mill Finish 6060 T5 9.899 841492 EK9138 80 80 6 – 6.5 320 320 Mill Finish 6060 T5 16.218
17
Angles continued
809521 E20709 80 80 10 RAD 6 317 317 Mill Finish 6061 T6 24.426
908410 EME30823 90 40 1.6 RAD 6.5 259 259 Mill Finish 6060 T5 3.601
808487 E20525 100 50 4 – 6.5 300 300 Mill Finish 6060 T5 10.25
847658 EQ1558 100 50 6 RAD 6 298 298 Mill Finish 6061 T6 14.052
810938 EB1153 101.6 50.8 3.2 – 6 305 305 Mill Finish 6060 T5 7.692
808344 EL4195 101.6 50.8 6.4 RAD 5.5 302 302 Mill Finish 6061 T6 13.954
910166 EXP0062 101.6 101.6 – – 6.35 402 402 Mill Finish 6351 T6 18.827
808206 EK9139 125 50 3 – 6.5 350 350 Mill Finish 6060 T5 9.054
Channels
18 19
Channels
813710 EK9146 10 10 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.754
813716 EK9149 12 12 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.917
815401 EK9151 12 20 2.5 – 6.5 100 100 Mill Finish 6060 T5 2.061
808161 E20770 16 12 1.6 – 6.5 100 100 Mill Finish 6060 T5 1.033
815408 EK9152 16 16 1.6 – 6.5 100 100 Mill Finish 6060 T5 1.261
809530 E20772 16 16 3 – 6.5 100 100 Mill Finish 6060 T5 2.21
813719 EK9153 20 16 1.6 – 6.5 101 101 Mill Finish 6060 T5 1.372
A R1 811130
841525
EL1812
EK9155
20
20
20
20
1.6
3
–
–
6.5
6.5
116 116 Mill Finish 6060 T5 1.592
114 114 Mill Finish 6060 T5 2.841
815410 EK9156 25 12 3 – 6.5 100 100 Mill Finish 6060 T5 2.262
813748 EL1813 25 20 1.6 – 6.5 127 127 Mill Finish 6060 T5 1.735
813721 EK9157 25 20 2.5 – 6.5 124 124 Mill Finish 6060 T5 2.632
T 813756
813724
EL5249
EK9158
25
25
25
25
1.6
3
–
–
6.5
6.5
147 100 Mill Finish 6060 T5 2.015
143 143 Mill Finish 6060 T5 3.627
B 815412
809544
EK9159
E20784
25
32
40
16
3
1.6
–
–
6.5
6.5
203 105 Mill Finish 6060 T5 5.213
125 125 Mill Finish 6060 T5 1.703
815413 EK9160 32 25 3 – 6.5 158 158 Mill Finish 6060 T5 4.004
847649 EQ1556 40 20 2 – 6.5 156 156 Mill Finish 6060 T5 2.665
813727 EK9161 40 20 3 – 6.5 153 153 Mill Finish 6060 T5 3.893
813730 EK9162 40 25 3 – 6.5 174 174 Mill Finish 6060 T5 4.42
809552 E20790 40 40 3 – 6.5 232 232 Mill Finish 6060 T5 6
811004 EH5367 41.9 25.4 1.6 – 6.5 181 181 Mill Finish 6060 T5 2.502
21
Channels continued
808197 EG1021 44.45 25.4 3.18 – 6.5 184 184 Mill Finish 6060 T5 4.959
841317 EK5215 44.45 44.45 6.35 RAD 4 252 252 Mill Finish 6060 T5 8.228
809134 EK9215 50 25 3 – 6.5 194 194 Mill Finish 6060 T5 4.947
813731 EK9163 50 50 3 – 6.5 294 294 Mill Finish 6060 T5 7.578
809558 E20821 54.2 20 1.6 – 6.5 185 185 Mill Finish 6060 T5 2.561
841550 EK9164 60 32 3 – 6.5 242 242 Mill Finish 6060 T5 6.214
808199 EG6435 76 38 7.95 RAD 5.5 286 286 Mill Finish 6061 T6 15.032
813733 EK9165 80 25 3 – 6.5 253 253 Mill Finish 6060 T5 6.526
813735 EK9166 80 40 4 – 6.5 312 312 Mill Finish 6060 T5 10.673
813736 EK9168 100 25 3 – 6.5 294 294 Mill Finish 6060 T5 7.578
912921 EAL22966 100 45 4.8 RAD 6.5 366 366 Mill Finish 6005A T5 15.249
815321 EB1208 100 50 3 – 6.5 394 394 Mill Finish 6060 T5 10.212
842521 EN3527 100 50 5.0 RAD 6 386 386 Mill Finish 6005 T5 15.564
841141 EG6434 101.6 50.8 7.93 RAD 5.5 385 385 Mill Finish 6082 T6 20.581
841125 EG6433 127 63.5 9.53 RAD 5.5 486 486 Mill Finish 6061 T6 28.875
Tee
810981 EG6432 152 64 7.95 RAD 5.5 536 536 Mill Finish 6061 T6 28.556
810979 EG6430 177.8 76.2 6.35 – 5.5 637 637 Mill Finish 6061 T6 40.738
809563 E20935 180 80 11.0 RAD 6 662 662 Mill Finish 6061 T6 44.118
Sections
885566 EN3529 200 90 10.0 RAD 6 730 730 Mill Finish 6060 T5 51.888
850292 EU1691 254 115 12.5 RAD 6 919 919 Mill Finish 6061 T6 90.762
22 23
A
T
811108 EK9140 20 20 1.6 – 4 100 100 Mill Finish 6060 T5 0.664
841498 EK9141 20 20 3 – 4 100 100 Mill Finish 6060 T5 1.2
Flat Bars
813705 EK9142 25 25 1.6 – 6.5 100 100 Mill Finish 6060 T5 1.359
841506 EK9143 25 25 3 – 6.5 100 100 Mill Finish 6060 T5 2.477
810132 EL5287 40 40 1.6 – 6.5 160 100 Mill Finish 6060 T5 2.204
813708 EK9144 40 40 3 – 6.5 160 160 Mill Finish 6060 T5 4.056
808462 E20212 50 25 1.6 – 6.5 150 100 Mill Finish 6060 T5 2.054

24 25
Flat Bars
Material A B T R1 Alloy/ Nom Material A B T R1 Alloy/ Nom
Die No Lm AP PP Finish Die No Lm AP PP Finish
No. mm mm mm mm Temp Mass No. mm mm mm mm Temp Mass
816250 EX4001 10 3 – – 4 100 100 Mill Finish 6060 T5 0.32 905855 EX4015 40 4 – – 4 100 100 Mill Finish 6106 T6 1.728
852141 EX4095 12 1.6 – – 4 100 100 Mill Finish 6060 T5 0.208 813962 EX4023 40 6 – – 4 100 100 Mill Finish 6060 T5 2.592
851988 EX4003 16 3 – – 4 100 100 Mill Finish 6060 T5 0.52 907742 E20038 40 16 – – 4 112 112 Mill Finish 6060 T5 6.912
816249 EX4000 20 1.6 – – 4 100 100 Mill Finish 6060 T5 0.344 812605 EX4047 40 25 – – 4 130 130 Mill Finish 6060 T5 10.8
808087 E20016 20 10 – – 4 100 100 Mill Finish 6060 T5 2.16 813965 EX4024 50 6 – RAD 4 110 110 Mill Finish 6060 T5 3.232
875893 EX1468 25.4 1.57 – – 4 100 100 Mill Finish 6060 T5 0.432 852128 EX4070 60 10 – – 4 140 140 Mill Finish 6060 T5 6.48
852036 EX4030 32 10 – – 4 100 100 Mill Finish 6060 T5 3.456 906845 EAL12291 80 1.6 – – 3.6 163 163 Mill Finish 6060 T5 1.242
27
Flat bars continued
813969 EX4025 80 6 – – 4 172 172 Mill Finish 6060 T5 5.184
813980 EX4033 80 10 – – 4 180 180 Mill Finish 6060 T5 8.64
809391 E20061 80 12 – – 4 184 184 Mill Finish 6060 T5 10.368
852081 EX4044 80 16 – – 4 192 192 Mill Finish 6060 T5 13.824
808089 EX4049 80 25 – – 4 210 210 Mill Finish 6060 T5 21.6
837582 E34113 100 1.5 – – 3.75 202 202 Mill Finish 6060 T5 1.515
813957 EX4011 100 3 – – 4 206 206 Mill Finish 6060 T5 3.24
813971 EX4026 100 6 – – 4 212 212 Mill Finish 6060 T5 6.48
813982 EX4034 100 10 – – 4 220 220 Mill Finish 6060 T5 10.8
813986 EX4042 100 12 – – 4 224 224 Mill Finish 6060 T5 12.96
852097 EX4050 100 25 – – 4 250 250 Mill Finish 6060 T5 27
969939 EP11453 150 8 – – 4 314 314 Mill Finish 6060 T5 12.952
816276 EX4027 160 6 – – 4 330 330 Mill Finish 6060 T5 10.36
816284 EX4035 160 10 – – 4 340 340 Mill Finish 6060 T5 17.28
812601
852102
EX4043
EX4051
160
160

12
25
–
–
–
–
4
4
344 344 Mill Finish 6060 T5 20.736
370 370 Mill Finish 6060 T5 43.2

Rectangular
Hollows
28 29
Rectangular Hollows
Material Die No A B T R1 Alloy/ Nom
Lm AP PP Finish
No. mm mm mm m Temp Mass
888882 EP7822 38 16 1.6 RAD 6.5 106 106 Mill Finish 6060 T5 2.841
836484 E22174 38 25 1.5 RAD 6.5 120 120 Mill Finish 6106 T6 3.055
906033 EN9524 38 25 2 RAD 6.5 121 121 Mill Finish 6106 T6 4.037
808742 EH2938 38.1 17.45 3.18 – 6.5 111 111 Mill Finish 6060 T5 5.492
848193 EQ4084 38.1 25.4 1.6 RAD 6 121 121 Mill Finish 6106 T6 3.03
809093 EG2205 38.1 25.4 2.54 – 6.5 127 127 Mill Finish 6060 T5 5.206
814552 EN6565 38.3 25.3 1.95 RAD 6 126 126 Mill Finish 6106 T6 3.756
815318 EB1014 40 25 2.5 – 6.5 130 130 Mill Finish 6060 T5 5.265
B 809585 E22122
809596 E22167
40
50
25
25
3
1.5
RAD
RAD
6.5
6.5
125
148
125
148
850730 EU7751 50 25 2.5 – 6.5 150 150 Mill Finish 6060 T5 6.143
T
A 813770 EL8012
815444 EL8013
50
50
25
40
3
3
–
–
6.5
6.5
150
180
150
180
847616 EQ1148 50.8 25.4 2.5 RAD 6 150 150 Mill Finish 6060 T5 5.742
809089 EE3956 50.8 38.1 3.18 RAD 6.5 178 178 Mill Finish 6060 T5 9.366
813772 EL8015 60 40 3 – 6.5 200 200 Mill Finish 6060 T5 9.899
841963 EL8016 60 50 3 – 6.5 220 220 Mill Finish 6060 T5 10.985
816414 EE3867 63.5 50.8 3.18 RAD 6.5 229 229 Mill Finish 6060 T5 12.376
850051 EQ6823 65 16 1.2 RAD 6.5 156 156 Mill Finish 6060 T5 3.224
855605 EQ6948 65 16 1.4 RAD 6.5 156 156 Mill Finish 6060 T5 3.744
809142 EL4238 76.2 25.4 2.4 – 6.5 203 203 Mill Finish 6060 T5 8.157
31
Rectangular Hollows continued
Lm AP PP Finish
No. mm mm mm m Temp Mass
808139 E01864 76.2 50.5 3.2 – 6.5 253 253 Mill Finish 6060 T5 13.546
815907 EQ1915 76.2 50.8 1.6 – 6 254 254 Mill Finish 6060 T5 6.42
813774 EL8018 80 25 3 – 6.5 210 210 Mill Finish 6060 T5 10.426
813775 EL8019 80 40 3 – 6.5 240 240 Mill Finish 6060 T5 12.005
849873 EQ6383 80 40 3 RAD 6.5 229 229 Mill Finish 6061 T6 11.798
813778 EL8020 80 50 3 – 6.5 260 260 Mill Finish 6060 T5 13.058
943022 EP9944 80 50 3 RAD 6.5 250 250 Mill Finish 6060 T5 12.851
854520 EH5716 82.55 28.58 2.29 – 6.5 222 222 Mill Finish 6060 T5 8.567
847823 EQ2698 100 25 1.6 – 6.5 250 250 Mill Finish 6060 T5 6.84
813781 EL8021 100 25 2.5 – 6.5 250 250 Mill Finish 6060 T5 10.53
841984 EL8023 100 40 3 – 6.5 280 280 Mill Finish 6060 T5 14.112
895481 EP8087 100 50 1.6 – 6.5 299 299 Mill Finish 6106 T6 8.249
815450 EL8024 100 50 1.6 RAD 6.5 299 299 Mill Finish 6060 T5 8.242
813788 EL8025 100 50 3 – 6.5 300 300 Mill Finish 6060 T5 15.164
954507 EB1592 100 50 6 RAD 6.5 286 286 Mill Finish 6005A T5 28.158
842005 EL8028 125 40 3 – 6.5 330 330 Mill Finish 6060 T5 16.744
Square
842006 EL8030 125 50 3 – 6.5 349 349 Mill Finish 6060 T5 17.791
815453 EL8033 150 50 3 – 6.5 400 400 Mill Finish 6060 T5 20.43
814487 E01795 152.4 38.1 3.2 – 6.5 381 381 Mill Finish 6060 T5 20.676
815456 EL8035 200 50 3 – 6.5 500 500 Mill Finish 6060 T5 25.694
32
814521 EH3532 203.2 50.8 4.75
836457 E22173 250

50 3
–
–
6.5
6.5
507
600
507
600

Solid
33
A
Lm AP PP Finish
814123 EX6500 6 – – – 4 100 100 Mill Finish 6060 T5 0.388
856311 EX6501 10 – – – 4 100 100 Mill Finish 6060 T5 1.08
Square
808810 EX6502 12 – – – 4 100 100 Mill Finish 6060 T5 1.556
856315 EX6503 16 – – – 4 100 100 Mill Finish 6060 T5 2.764
814126 EX6504 20 – – – 4 100 100 Mill Finish 6060 T5 4.32
856318 EX6505 25 – – – 4 100 100 Mill Finish 6060 T5 6.752
808812 EX6506
808814 EX6507
809426 EX6508
40
50
65
–
–
–
–
–
–
4
4
160
200
260
160 Mill Finish 6106 T6 17.024
200 Mill Finish 6106 T6 28.1
260 Mill Finish 6106 T6 45.632 Hollows

34 35
Square Hollows
Lm AP PP Finish
815380 EH2913 12.7 – – – 6.5 100 100 Mill Finish 6060 T5 1.229
810990 EG8354 19.02 – 1.57 RAD 6.5 100 100 Mill Finish 6060 T5 1.885
811019 EK1333 19.05 – 1.2 – 6.5 100 100 Mill Finish 6060 T5 1.502
808166 E22101 20 – 1.6 – 6.5 100 100 Mill Finish 6060 T5 2.074
813750 EL2299 20 – 3 – 6.5 100 100 Mill Finish 6060 T5 3.581
810378 E51872 20 – 3 RAD 6.5 100 100 Mill Finish 6060 T5 3.438
808512 E22103 25 – 1.6 – 6.5 100 100 Mill Finish 6060 T5 2.632
842495 EN3238 25 – 2 RAD 6 100 100 Mill Finish 6060 T5 2.982
A 815441 EL8003
807853 E22120
25
25
–
–
3
3
–
RAD
6.5
6.5
100
100
100
100
810372 E50413 25.4 – 1.2 RAD 6.5 100 100 Mill Finish 6060 T5 1.93
T
815894 EQ1557 32 – 2 – 6.5 128 128 Mill Finish 6060 T5 4.212
813763 EL8005 32 – 3 – 6.5 128 128 Mill Finish 6060 T5 6.11
939032 EP9743 38 – 2 – 6.5 151 151 Mill Finish 6060 T5 5.051
843824 EN9549 38 – 2 RAD 6.5 147 147 Mill Finish 6060 T5 4.946
815436 EL7938 40 – 1.6 – 6.5 159 159 Mill Finish 6060 T5 4.316
809876 EQ4000 40 – 2 – 6.5 160 160 Mill Finish 6060 T5 5.336
807851 E22108 40 – 3 – 6.5 160 160 Mill Finish 6060 T5 7.793

37
Square Hollows continued
Lm AP PP Finish
808513 E22109 45 – 2.5 – 6.5 180 180 Mill Finish 6060 T5 7.461
812096 EQ2259 50 – 1.6 – 6.5 200 200 Mill Finish 6060 T5 5.434
938627 EQ6446 50 – 1.6 RAD 6.5 189 189 Mill Finish 6060 T5 5.174
855759 EB1003 50 – 2 – 6.5 200 200 Mill Finish 6060 T5 6.74
813768 EL8008 50 – 2.5 – 6.5 200 200 Mill Finish 6060 T5 8.333
840340 EB1004 50 – 3 – 6.5 200 200 Mill Finish 6060 T5 9.9
813616 EK1537 50.8 – 2.03 RAD 6.5 192 192 Mill Finish 6060 T5 6.623
849871 EQ6382 65 – 2.5 – 6.5 259 259 Mill Finish 6060 T5 10.965
812251 EU2011 65 – 3 RAD 6.5 251 251 Mill Finish 6060 T5 13.058
912600 EXP0149 75 – 3 – 6.5 300 300 Mill Finish 6060 T5 15.217
849548 EQ6032 75 – 3 RAD 6.5 290 290 Mill Finish 6060 T5 14.755
848221 EQ4171 76 – 6.35 RAD 6 277 277 Mill Finish 6082 T6 26.388
Tubes
38
Tubes
816304 EX5001 10 – 1.2 – 6.5 100 100 Mill Finish 6060 T5 0.578
865941 EX5098 10 – 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.735
813994 EX5004 12 – 1.6 – 6.5 100 100 Mill Finish 6060 T5 0.916
816213 EX2026 15.88 – 1.22 – 6 100 100 Mill Finish 6106 T6 0.912
851600 EX2028 15.88 – 1.63 – 6 100 100 Mill Finish 6060 T5 1.182
814011 EX5006 16 – 1.6 – 6.5 100 100 Mill Finish 6060 T5 1.268
808548 E40149 19 – 1.2 – 6.5 100 100 Mill Finish 6060 T5 1.176
813927 EX2195 19.05 – 1.65 – 6.1 100 100 Mill Finish 6060 T5 1.482
A 814025
814039
EX5008
EX5010
20
25
–
–
1.6
1.6
–
–
6.5
6.5
100
100
100
100
814046 EX5011 25 – 3 – 6.5 100 100 Mill Finish 6060 T5 3.633
814057 EX5013 32 – 1.6 – 6.5 100 100 Mill Finish 6060 T5 2.684
814060 EX5014 32 – 3 – 6.5 101 101 Mill Finish 6060 T5 4.797
808541 E40015 38.1 – 2 – 6.5 120 120 Mill Finish 6060 T5 3.985
810269 E40016 38.1 – 3.25 – 6.5 120 120 Mill Finish 6060 T5 6.246
T 855977
814070
EX5015
EX5017
40
40
–
–
1.6
3
–
–
6.5
6.5
125
126
125
126
969202 EALH0417 44.5 – 3.2 – 6.5 140 140 Mill Finish 6060 T591 7.287
812582 EX2202 48.41 – 4.47 – 6 152 152 Mill Finish 6061 T6 9.996
855991 EX5018 50 – 1.6 – 6.5 157 157 Mill Finish 6060 T5 4.271
814093 EX5041 50.0 – 3.0 – 6.5 157 157 Mill Finish 6060 T5 7.77
41
Tubes continued
856085 EX5041 50 – 3 – 6 157 157 Mill Finish 6005A T5 7.176
814115 EX5081 50 – 4 – 6.5 157 157 Mill Finish 6060 T5 10.146
946413 EP7790 50 – 5 – 6 157 157 Mill Finish 6060 T4 11.454
815218 E40545 50 – 6 – 6 157 157 Mill Finish 6060 T5 13.428
810138 EX5021 60 – 2 – 6.5 188 188 Mill Finish 6060 T5 6.396
856010 EX5022 60 – 3 – 6.5 188 188 Mill Finish 6060 T591 9.425
856149 EX5071 60 – 5 – 6.5 188 188 Mill Finish 6060 T5 15.165
812568 EX2138 63.5 – 6.35 – 6.5 199 199 Mill Finish 6106 T6 20.00
912868 EX2152 76.19 – 3.25 – 6.5 239 239 Mill Finish 6060 T5 13.072
871062 EX2153 76.19 – 6.35 – 6.5 239 239 Mill Finish 6061 T6 24.453
812632 EX5023 80 – 2 – 6.5 251 251 Mill Finish 6060 T5 8.6
856027 EX5024 80 – 3 – 6.5 251 251 Mill Finish 6060 T5 12.74
851712 EX2161 88.9 – 5.33 – 6 279 279 Mill Finish 6060 T5 22.662
816331 EX5026 100 – 3 – 6.5 314 314 Mill Finish 6060 T5 16.042
816239 EX2214 101.6 – 1.6 – 6.5 319 319 Mill Finish 6060 T5 8.827
851723
810364
EX2170
E40682
101.6
127
–
–
6.35
2.8
–
–
6.5
6.5
319
399
319
399

Drawn
Tube
812541 EX2007 152.4 – 3.25 – 6 479 479 Mill Finish 6060 T5 24.672
42
A
T
Die No mm mm mm mm L m AP PP Finish
Round
No. Temp Mass
600994 E-1214 12.7 – 1.42 – 5.5 – – Mill Finish 6060 T81 0.748
600853 EP8510 15.88 – 1.42 – 5.5 100 100 Mill Finish 6060 T81 0.957
600856 EP8511 19.05 – 1.42 – 5.5 111 100 Mill Finish 6060 T81 1.166
Bar
600324 E-2214 22.23 – 1.42 – 5.5 – – Mill Finish 6060 T81 1.381
600255 E-2514 25.4 – 1.42 – 5.5 – – Mill Finish 6060 T81 1.59
600256 E-2814 28.58 – 1.42 – 5.5 – – Mill Finish 6060 T81 1.799
600054 E-3216 32 – 1.6 – 6 – – Mill Finish 6060 T81 2.478
44
Round Bar
Die No mm L m AP PP Finish
No. mm mm m Temp Mass
814954 EX6000 10 – – – 4 100 100 Mill Finish 6060 T5 0.844
816362 EX6001 12 – – – 4 100 100 Mill Finish 6060 T5 1.22
808384 EX6002 16 – – – 4 100 100 Mill Finish 6060 T5 2.172
808385 EX6003 20 – – – 4 100 100 Mill Finish 6060 T5 3.392
808794 EX3000 25.4 – – – 4 100 100 Mill Finish 6060 T5 5.468
851947 EX3000 25.4 – – – 4 100 100 Mill Finish 6061 T6 5.468
809459 E20306 30 – – – 4 100 100 Mill Finish 6061 T6 7.636
816367 EX6005 33 – – – 4 104 104 Mill Finish 6061 T6 9.236
812669 EX6006 39 – – – 4 123 123 Mill Finish 6061 T6 12.90
812675 EX6010 50 – – – 4 157 157 Mill Finish 6061 T6 21.204
905812 EX3058 60.33 – – – 4 190 190 Mill Finish 6061 T6 30.872
808808 EX6012 65 – – – 3 204 204 Mill Finish 6061 T6 26.877
808796 EX3066 76.19 – – – 2 239 239 Mill Finish 6061 T6 25.622
907980 EX3099 101.6 – – – 2 319 319 Mill Finish 6061 T6 43.78

Machine
Rod
46
Machine Rod
Lm AP PP Finish
600904 EXP0074 6 – – – 3.6 100 100 Mill Finish 2011 T3 0.288
600892 EAL4066 8 – – – 3.6 100 100 Mill Finish 2011 T3 0.504
600708 EX6000 10 – – – 3.6 100 100 Mill Finish 2011 T3 0.767
600712 EX6001 12 – – – 3.6 100 100 Mill Finish 2011 T3 1.16
600872 EX6023 14 – – – 3.6 100 100 Mill Finish 2011 T3 0.416
600710 EX6002 16 – – – 3.6 100 100 Mill Finish 2011 T3 1.962
600907 EAL4072 18 – – – 3.6 100 100 Mill Finish 2011 T3 2.592
600722 EX6003 20 – – – 3.6 100 100 Mill Finish 2011 T3 3.064
600724 E20303 22 – – – 3.6 100 100 Mill Finish 2011 T3 3.708
600726 EX3000 25.4 – – – 3.6 100 100 Mill Finish 2011 T3 5.2
600728 EX6004 27 – – – 3.6 100 100 Mill Finish 2011 T3 5.835
600730 E20306 30 – – – 3.6 100 100 Mill Finish 2011 T3 7.19
600732 EX6005 33 – – – 3.6 104 104 Mill Finish 2011 T3 8.675
600734 EX6036 36 – – – 3.6 113 113 Mill Finish 2011 T3 10.42
A
908395 EX6006 39 – – – 3.6 123 123 Mill Finish 2011 T6 12.085
971901 EXP0332 40 _ _ _ 4 126 126 Mill Finish 2011 T6 12.38
911013 EX6007 42 – – – 3.6 132 132 Mill Finish 2011 T6 14.634
909446 EX6008 45 – – – 3.6 141 141 Mill Finish 2011 T6 15.455
908397 EX6010 50 – – – 3.6 157 157 Mill Finish 2011 T6 19.084
908000 EX6011 55 – – – 1.8 173 173 Mill Finish 2011 T6 11.547
908399 E20315 60 – – – 1.8 188 188 Mill Finish 2011 T6 13.741
908012 EX6012 65 – – – 1.8 204 204 Mill Finish 2011 T6 16.126

49
Machine Rod
Lm AP PP Finish
909448 EX6013 70 – – – 1.8 220 220 Mill Finish 2011 T6 18.704
906198 EX6014 75 – – – 1.8 236 236 Mill Finish 2011 T6 22.345
893428 EX6015 80 – – – 1.5 251 251 Mill Finish 2011 T6 21.127
893430 EX6016 90 – – – 1.5 283 283 Mill Finish 2011 T6 26.786
893432 EX6017 100 – – – 1.5 314 314 Mill Finish 2011 T6 31.809
893434 EX6018 110 – – – 1.5 346 346 Mill Finish 2011 T6 40.541
910098 EXP0076 120 – – – 1.5 100 100 Mill Finish 2011 T6 48.387
893166 EX6019 130 – – – 1.5 408 408 Mill Finish 2011 T6 55.556
893168 EX6020 140 – – – 1.5 440 440 Mill Finish 2011 T6 65.217
893170 EX6085 150 – – – 1.5 471 471 Mill Finish 2011 T6 75
893442 EX6021 160 – – – 1.5 503 503 Mill Finish 2011 T6 83.333
971907 EXP0333 190 _ _ _ 1.5 597 597 Mill Finish 2011 T6 132.5
910198 EX6022 210 – – – 1.5 660 660 Mill Finish 2011 T6 146.54
Moulds
and Trims
50
Moulds and Trims
Material Material Market
Diagram Die No Lm AP PP Finish
No. Description Description
EG6449 Crescent mould Mill

813599 (E00144) 25.4 x 4.75 EG6449 4 100 100
6060 T1 RAD Finish
Table edge Mill

EE3388
808736 27.7 x 12.7 EE3388 4 100 100
6060 T1 Finish
RAD
Crescent mould Mill

EG6444
841153 15.88 x 4.75 EG6444 4 100 100
6060 T1 Finish
RAD
Crescent mould Mill

EG6448
810983 31.75 x 4.75 EG6448 4 100 100
6060 T1 Finish
RAD
EG6454 J-Trim Mill

808372 EG6454 4 100 100
6060 T1 23.8 x 12.7 Finish
Moulding Mill
EH1600
808373 Windscreen U FIN EH1600 5 100 100
6060 T1 Finish
19.06 x 10.88
Table Edge Mill

EH2351
810996 20.62 x 6.73 EH2351 4 100 100
6060 T1 Finish
RAD
Wallboard edge Mill

EH2919
810998 21.29 x 8 EH2919 5.01 100 100
6060 T5 Finish
5.5 GAP
Crescent Mould Mill

EH2989
808744 38.1 x 4.75 EH2989 4 100 100
6060 T1 Finish
RAD
ET2894 H- Trim Mill

808326 ET2894 4 140 140
6060 T5 381 x 12.7 Gap Finish
E00161 Fluted bar Mill

808386 E00161 4 100 100 Finish
6060 T1 38.1 x 4
53
Moulds and Trims continued
EG6459 Mill
810985 Fluted Strip EG6459 4 106 106
6060 T1 Finish
E53450 Bus Stair Tread Mill

838822 E53450 4 178 100
6060 T5 51 x 35 Finish
ET2436 Ticket Strip Mill

850203 ET2436 3.657 100 100
6060 T5 31.75 Finish
EME31156 Slat Wall Mill

906878 EME31156 2.4 136 100
6060 T5 28 x 13.5 Finish
EP12112 Mill
980647 Curved Infill EP12112 6.5 118 118
6060 T5 Finish
EP12113 Mill
980649 Infill EP12113 6.5 106 106
6060 T5 Finish
Display panel
EN8354 Mill
811534 trim EN8354 2.4 128 100 Finish
6060 T5
28 x 13.7
Bull Nose Stair

EE2611 Mill
808734 Tread EE2611 4 123 123
6060 T5 Finish
46.02 x 15.06
808198

EG2500
6060 T1
Table Edge
29.36 x 5.92
EG2500 4 100 100
Mill
Finish
Qubelok
Extrusion
54 55
Qubelok Extrusion
EH4487 Qubelok
Mill
807906 (E37863) 25.4 x 25.4 x 1.2 EH4487 6.5 100 100
Finish
6060 T5 RAD
15um
EH4487 Qubelok
Clear
954282 (E37863) 25.4 x 25.4 x 1.2 EH4487 6.5 100 100
- T25
6060 T5 RAD
Black
EH4487 Qubelok
15um
861601 (E37863) 25.4 x 25.4 x 1.2 EH4487 6.5 100 100
Clear
6060 T5 RAD
Qubelok
EH4487 Black
964027 25.4 x 25.4 x 1.2 EH4487 6.5 100 100
6060 T5 Satin A
RAD
EH4487 Qubelok
Pearl
861948 (E37863) 25.4 x 25.4 x 1.2 EH4487 6.5 100 100
White
6060 T5 RAD
Qubelok
EN9673 Mill
811556 25.4 x 25.4 EN9673 6 143 114
6060 T5 Finish
7.5mm receptor
Qubelok
ET7200 Mill
808021 25.4 x 25.4 ET7200 6.5 114 114
6060 T5 Finish
One leg
15um
Qubelok
ET7200 Clear
954283 25.4 x 25.4 ET7200 6.5 114 114
6060 T5 - T25
One leg
Black
Qubelok
ET7200 15um
861816 25.4 x 25.4 ET7200 6.5 114 114
6060 T5 Clear
One leg
57
Qubelok Accessories
Diagram Material No. Material Description Market Description
302401 Adjustable foot [F] N/A
Inserts into
302303 Adjustable foot [M]
MNTC006 (pk=100)
302198 Endcap 50 square nylon bk Endcap 50 sq nylon (pk=100)
Qubelok 2 leg p20 Qubelok 2 leg p20

300333
Connector bk Connector bk

300334

300335

300336

300337

300338

300339
59
Qubelok Accessories continued
Diagram Material No. Material Description Market Description
300341 Qubelok castor p13 colour bk Qubelok castor p13 colour bk
300342 Qubelok castor socket p15 bk Qubelok castor socket p15 bk
300340 Qubelok endcap 25 sq plas bk Qubelok endcap 25 sq plas bk
Seating &
accessorıes
60
Seating and accessories
Seating Extrusions
EL2327 15um
808749 Seating Plank EL2327 6 796 365
6060 T5 Clear
EL2327 15um
808747 Seating Plank EL2327 4 796 365
6060 T5 Clear
EL2327 15um
861684 Seating Plank EL2327 2 796 365
6060 T5 Clear
EL2962 Seating Bench - 15um

808751 EL2962 6 598 598
6060 T5 Back Rest Clear
Seating Accessories
Diagram Material No. Material Description Market Description Finish
300324 Seat Backrest Endcap Seat Backrest Endcap Mill Finish
300322 Seat Plank Cast Endcap Seat Plank Cast Endcap Mill Finish
Seat Supp Type 2A Seat Supp Type 2A

300326 400mm 400mm Mill Finish
(No Backrest) (Nobackrest)
Seat Supp Type 2D Seat Supp Type 2D

(No Backrest) (No Backrest)
Seat Supp Type 4A Seat Supp Type 4A

300327 400mm Inc Seat Std 400mm Inc Seat Std Mill Finish
Seat Supp Type 4B Seat Supp Type 4B

Inc Seat Primary Inc Seat Primary
63
Seating and accessories continued
Diagram Material No. Material Description Market Description Finish
Seat Supp Type 4C Seat Supp Type 4C

Inc Seat Infant Inc Seat Infant


Inc seat (Backrest) Inc seat (Backrest)
Seat Support Type 5A Seat Support Type 5A

300328 Mill Finish
400mm (Backrest) 400mm (Backrest)

300329 Mill Finish
400mm (Backrest) 400mm (Backrest)

300330 Mill Finish
400 (No Backrest) 400 (No Backrest)
Scaffold
Plank
64
No Description Description
300331 Scaffold Plank Scaffold Plank – 6 – – Mill

6106 T6 6m MF Finish
300683 Scaffold Plank

6106 T6
Scaffold Plank
Scaffold Plank
5m MF
Scaffold Plank
– 5 – – Mill
Finish
Mill
Coolroom
& Portable
301224 – 4 – –
Scaffold Plank Scaffold Plank Mill

301299 – 3 – –
66
300332 Scaffold

Plank End Scaffold Plank
Capral End Std Finish – – – – Std
Finish
Buildings
Coolroom & Portable Buildings
Material Material Market Material Material Market
Diagram Die No Lm AP PP Finish Diagram Die No Lm AP PP Finish
No. Description Description No. Description Description
EAL12220 Coolroom Mill E61129 I Beam Mill

909280 EAL12220 6.5 183 100 808578 E61129 6.5 305 305
6060 T5 Coving 50mm Finish 6060 T5 54 x 50.8 x 1.6 Finish
Coolroom Coolroom
EAL12290 Mill El8340 Mill
909284 Doorjamb EAL12290 6.5 204 117 808753 Coving EL8340 6.5 181 100
6060 T5 Finish 6060 T5 Finish
54 x 31 50 x 50
El8529 Coolroom -
EAL12443 Coolroom Track Mill Mill
908451 EAL12443 6.5 303 303 810134 (E38057) Channel EL8529 6.5 229 121
6060 T5 90 x 56 Finish Finish
6060 T5 55.8 x 30 x 1.5
El8530 Coolroom
EAL12509 Coolroom Mill Mill
909278 EAL12509 6.5 468 133 808374 (E37925) Coving EL8530 6.5 119 119
6060 T5 Corner Profile Finish Finish
6060 T5 35 x 35
EH7644 Coolroom Door

Rope Track Mill EN8888 Mill
813605 (E00229) EH7644 6.5 100 100 811538 Frame Channel EN8888 6.5 203 113
28.17 x 12.53 Finish 6060 T5 Finish
6060 T5 54 x 30.7
Wallboard Coolroom
E14698 Mill EP5139 Mill
809104 H Section E14698 6.5 138 100 815799 Channel EP5139 6.5 463 463
34.5 x 9 156 x 38.5
Coolroom Coolroom
E18699 Mill EQ3077 Mill
809252 Coving E18699 6.5 204 102 807999 Channel EQ3077 6.5 360 100
50 x 50 105 x 38 x 1.5
Rope Track 2 Coolroom

E30278 Mill EQ4034 Mill
809875 Throat E30278 6 129 100 815937 Corner Mould EQ4034 6.5 121 100
27.5 x 12.2 35 x 35
E32045 Channel Coolroom

Mill EQ4712 Mill
837228 (AL11870) 81 x 38 E32045 6.5 311 311 848422 Door Track EQ4712 6.5 285 285
Finish 6106 T6 Finish
6060 T5 (Coolroom) 71.5 x 30
Coolroom ET4833 Channel

E36063 Mill Mill
837902 Top Track E36063 6.5 469 469 850221 (Al3260) 168.27 x 25.4 ET4833 6.5 429 429
6060 T5 Finish Finish
148 x 40 6060 T5 RAD
EL3317 Rope Track ET4837

Mill Channel Mill
813754 (E50927) Flange EL3317 6.5 129 100 809882 (Al3261) ET4837 6.5 277 277
Finish 92.07 x 25.4 Finish
6060 T5 43.4 x 10 6060 T5
69
Coolroom & Portable Buildings continued
Coolroom
ET7490 Mill
808775 Arrowhead Trim ET7490 6.5 143 100
6060 T5 Finish
50.6 x 25.4
Coolroom
EU6648 Mill
812286 Coving EU6648 6.5 271 133
6060 T5 Finish
75 x 75
EXP0099 Cover Adaptor Mill

910976 EXP0099 6.5 169 169
6060 T5 Coolroom Finish
Coolroom Angle
EAL22080 Mill
909379 40 x 40 x 1.5 EAL22080 6.5 160 160
6060 T5 Finish
RAD
E51877 Channel Mill

808571 E51877 6.5 304 155
6060 T5 78.2 x 38 x 1.6 Finish
Coolroom
E20825 Mill
809560 Channel E20825 6.5 203 203
6060 T Finish
53.4 x 25 x 1.2
Coolroom
Channel Mill
810376 E51852 E51852 6.5 354 181
103.2 x 38 x 1.6 Finish
RAD
Sheet
and Plate
70
Sheet and Plate
Sheet/Plate 5005 Sheet/Plate 5251/5052
Material Sap Colour Material Sap Colour
Material Description Finish Material Description Finish
No Code No Code
100037 0.60 1200 2400 MF 5005 H34 Mill Finish NON 100084 1.60 1200 2400 MF 5251 H34/5052 H32 Mill Finish NON
100836 2.50 1200 2400 MF 5251 H34/5052 H32 Mill Finish NON
100058 1.00 1200 2400 MF 5005 H34 (MPC) Mill Finish PVC Coated MPC
105071 1.00 1200 3600 MF 5005 H34 (MPC) Mill Finish PVC Coated NON
100059 1.20 1200 2400 MF 5005 H34 Mill Finish NON
100060 1.20 1200 2400 MF 5005 H34 (MPC) Mill Finish PVC Coated MPC 104983 3.00 1500 3000 MF 5251 H34/5052 H32 Mill Finish NON
100818 1.60 1200 3600 MF 5005 H34 Mill Finish NON Sheet/Plate 5083
100115 2.00 1200 2400 MF 5005 H34 Mill Finish NON Material Sap Colour
Material Description Finish
No Code
100128 3.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certified NON
100146 4.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certified NON
100831 2.00 1500 3600 MF 5005 H34 Mill Finish NON 100158 5.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certified NON
100122 2.50 1200 2400 MF 5005 H34 (MPC) Mill Finish PVC Coated MPC 100189 8.00 1200 2400 MF 5083 H321/116 DNV Mill Finish DNV Certified NON
100131 3.00 1200 2400 MF 5005 H34 (MPC) Mill Finish PVC Coated MPC 104061 16.0 1200 2400 MF 5083 H112 Mill Finish NON
100346 4.00 1200 2400 MF 5005 H34 Mill Finish NON 100932 65.0 1200 1200 MF 5083 H112 Mill Finish NON
73
Sheets Plates and Panels continued
Treadplate 5-Bar
Material Sap Colour
Material Description Market Description
No Code
100086 1.60 1200 2400 TPL 5251/5052 0 5-BAR Treadplate 5-Bar MF TPL
Treadplate Propellor Bright Finish

Material Sap Colour
Advantages
Material Description Market Description
No Code
100096 1.60 1219 2438 TPL 3003 H22 (PP1) Bright Finish Propellor Pattern PP1
of
74
Aluminium
Advantages of Aluminium
A unique combination of properties makes aluminium and its alloys one of the
most versatile engineering and construction materials available today.
Lightweight
Aluminium is one of the lightest available commercial metals with a
density approximately one third that of steel or copper. Its high strength
to weight ratio makes it particularly important to transportation
industries allowing increased payloads and fuel savings. Catamaran
ferries, petroleum tankers and aircraft are good examples of aluminium’s
use in transport. In other fabrications, aluminium’s lightweight can
reduce the need for special handling or lifting equipment.
Excellent corrosion resistance

Aluminium has excellent resistance to corrosion due to the thin layer
of aluminium oxide that forms on the surface of aluminium when it is
exposed to air. In many applications, aluminium can be left in the mill
finished condition. Should additional protection or decorative finishes
be required, then aluminium can be either anodised or painted.
Strong
Although tensile strength of pure aluminium is not high, mechanical
properties can be markedly increased by the addition of alloying
elements and tempering. You can choose the alloy with the most
suitable characteristics for your application. Typical alloying elements
are silicon, manganese, copper and magnesium.
Strong at low temperatures

Where as steel becomes brittle at low temperatures, aluminium
increases in tensile strength and retains excellent toughness.
Easy to work
Aluminium can be easily fabricated into various forms such as foil,
sheets, geometric shapes, rod, tube and wire. It also displays excellent
machinability and plasticity ideal for bending, cutting, spinning, roll
forming, hammering, forging and drawing. Aluminium can be turned,
milled or bored readily, using the correct toolage. In fact, most
aluminium alloys can be machined speedily and easily. An important
factor contributing to the low cost of finished aluminium parts.
Aluminium is a popular choice of material for complex-sectioned
77
Advantages of Aluminium continued
hollow extrusions. Almost any method of joining is applicable - riveting, plain aluminium surface does not suffice, a wide variety of surface
welding, brazing or soldering. A wide variety of mechanical aluminium finishes are available to suit. Chemical, electrochemical and paint
fasteners simplifies the assembly of many products. Adhesive bonding finishes are all used. Above all, anodising treatment can provide
of aluminium parts is successfully employed in many applications excellent corrosion resistance and a wide range of colour variations.
including aircraft components, car bodies and some building Such finishes are widely used for both interior and exterior applications.
applications.
Non-magnetic
Good heat conductor Aluminium has non-magnetic properties which make it useful for
Aluminium is about three times as thermally-conductive as steel. electrical shielding such as busbar or magnetic compass housings.
This characteristic is important in heat-exchange applications (whether Other applications include computer disks and parabolic antennas.
heating or cooling). Aluminium is used extensively in cooking utensils,
air conditioning, industrial heat exchangers and automotive parts. Non-toxic
The fact that aluminium is essentially non-toxic was discovered in the
High reflectivity early days of the industry. It is this characteristic which enables the
Aluminium is an excellent reflector of radiant energy through the metal to be used in cooking utensils without any harmful effect on the
entire range of wave lengths. From ultra-violet through the visible body. Aluminium with its smooth surface is easily cleaned, promoting
spectrum to infra-red and heat waves, as well as electromagnetic a hygienic environment for food processing. Aluminium foil wrapping
waves such as radio and radar. Aluminium has a light reflectivity of and containers are used extensively and safely in direct contact with
over 80% which has led to its wide use in lighting fixtures. These food products.
reflectivity characteristics also lead to its use as an insulating material.
For example, aluminium roofing reflects a high percentage of the Others
sun’s heat, promoting a cool interior atmosphere in summer, yet Easy to recycle
insulating against heat loss in winter. Due to a low melting temperature, it is economically recyclable,
requiring only about 5% the energy required for smelting. It is an ideal
Good electrical conductor material in this age of energy and resource saving.
Aluminium is one of the two common metals having electrical
Sound absorbing
conductivity high enough for use as an electrical conductor. The
conductivity of electrical-conductor grade (alloy 1350) is about 62% Used for ceilings
that of the International Annealed Copper Standard. However, Shock absorbing
aluminium is only a third the weight of copper, which means it Due to its low modulus of elasticity, aluminium is used for automobile
conducts about twice as much electricity as copper of the same weight. bumpers and the like.
Aluminium is widely utilised in power-transmission cables, transformers, Non-Sparking
busbars and bases of electrical bulbs. Aluminium is void of sparking properties against itself and other
non-ferrous metals.
Easy surface treatment
For many applications, aluminium requires no protective or
decorative coating; the surface supplied is entirely adequate without
further finishing. Mechanical finishes such as polishing, embossing,
sand blasting, or wire brushing meet a variety of needs. Where the
79
Manufacturing and Value Add techniques
Focused on the requirements of our customers, a significant investment has been
made in processing and fabrication facilities, including nine extrusion presses and
Australia’s largest extrusion press; 4400MT SMS Extrusion Press (yr2003), with
interchangeable 9”/12” container.
Fabrication facilities include:
• Automatic fine tolerance cut to length saw
Aluminium Mining and Production • 4 AXIS CNC machining product centre up to h=170mm, w=400mm, l=14000mm
• 3 AXIS CNC machining product centre h=180mm, w=200mm, l=7000mm
• CNC extrusion and plate router h=200mm, w=2500mm, l=12,500mm,
maximum cut depth = 30mm
• Drawn products: Precision ovality, work hardened tubing, outer diameter
Bauxite
40mm to 130mm, wall thickness 1.8mm - 10mm
• Knurling: Application of non-slip surface to extrusions
Crusher
• Product edge de-burring.
Precipitator Ingot Casting Continuous Casting
Potroom
These fabrication capabilities allow us to supply material closer to a final form,
Wire ingot
providing the option of variable sizes and finishes previously unavailable and
Digester Decanter Filter creating a real opportunity for a one-stop-shop.
Press Extrusion Remelt / Rod
Anode
ingot Foundry ingot Finishing Capabilities
Calciner
Alloying
A range of finishing options ensures your extrusions can be easily matched to your
Siphon Sheet ingot Rod Sheet
Alumina
elements project. Powder coatings, supplied by Interpon Powder Coatings, are available in
Extrusions
an extensive range of colours, gloss levels, textures and metallic shades for
Molten electrolyte
Molten aluminium complete colour freedom. Interpon’s entire architectural range qualifies for several
Cathode Holding furnace Green Star credits ensuring a sustainable finish for your project, with durability
Electrolytic cell Sheet
for up to 7, 10 and 15 years on colour and film integrity. For details and to view
the full colour range options, visit www.interpon.com.au
Aluminium Extruder/Manufacturer Anodising treatment can provide excellent corrosion resistance and a wide range
of colour options up to 25um. Such finishes are widely used for both interior
and exterior applications including the architects choice SatinEtch™ technology
which produces a matt finish with reduced die lines.
Production Process
Aluminium is a silver-white metal obtained from bauxite, a rock composed of
more than 50% aluminium hydroxides formed by weathering in tropical regions.
Aluminium is the earth’s third most abundant element (after oxygen and silicon)
and the most abundant metal in the earth’s crust (8% by mass).
Aluminium bearing compounds have been used by man from the earliest times.
Pottery was made from clays rich in hydrated silicate of aluminium and at one point
in history aluminium was so valuable that rulers and the wealthy preferred cutlery
made by aluminium instead of gold. Today more aluminium is produced each year
than all other nonferrous metals combined.The production of aluminium goes
via two different routes: primary aluminium production from ore and recycling
aluminium from process scrap and used aluminium products.
81
Aluminium - The Sustainable Metal Care and Maintenance
Aluminium boasts one of the highest recycling rates of any metal. At the end of Frequency of cleaning is largely dependant on the location of the product and
their long life, Capral extrusions can be readily recycled. Recycled aluminium it’s proximity to industrial or marine environments where monthly or more
generally falls into two broad categories. New scrap resulting from a manufacturing frequent cleaning is recommended if any deterioration of surface finish is
process such as extrusion is often not contaminated and of known quality. This apparent. However in any event general cleaning should be carried out at least
scrap is remelted and reprocessed with very little further treatment. Due to its high quarterly.
value, such scrap enjoys an almost 100% recycle rate.
Anodised Aluminium
Old scrap, such as that from beverage cans, building and transport is gathered
All aluminium surfaces should be kept clean by prompt removal of all dust, dirt,
and recycled via an efficient network of scrap metal merchants which sort and
grime and any foreign matter using clean water and a small amount of mild
separate it from other metals such as iron and steel. This scrap is most usually
detergent as required. Do not under any circumstances use any abrasive type
remelted by secondary refiners into silicon based alloys used predominantly for
cleaning agent (Ajax or similar) or any abrasive cleaning material such as steel
aluminium castings.
wool or the like as this will severely damage the anodised surface. Thoroughly
In Europe, recycling rates of aluminium cans can reach up to 63% whilst rates wash off any residue of detergent with clean water.
from buildings and transport are higher again and 85% & 95% respectively.
As recycling of aluminium requires only 5% of the initial energy consumed to Powder Coated Aluminium
create it, recycling one tonne of aluminium saves 5 tonnes of bauxite and 15,000 Cleaning is desirable if the fine finish of powder coated aluminium is to be
kilowatt hours of electricity, making excellent environmental and financial sense. preserved. Deterioration of the coating occurs mainly as a result of grime
deposition and attack by moisture, which in a coastal environment contains
National Manufacturing Footprint chlorides and sulphur compounds.
Capral’s national manufacturing footprint means that our extrusions, where Deposited grime absorbs contaminated moisture like a sponge and holds it
practicable are produced close to where they are required. This helps minimise against the powder coated surface; this permits the attack to proceed thereby
the impact of sea and road freight, reducing carbon dioxide emissions. damaging the coating, which cannot be restored without removal.
Australian Supply Chain
As a local manufacturer, Capral is required to meet Australian environmental
regulations and standards in its manufacturing and finishing operations.
Understanding the full life cycle impact of products requires manufacturing
processes and materials to be traced back to their source.
Extensive Distribution Network
Capral’s products are transported in bulk loads to regional distribution centres
that are within close proximity of our fabricators. The consolidation of fabricator
deliveries where practicable also helps minimise the impact of road freight, further
reducing carbon dioxide emissions.
Coatings and Finishes
Capral uses and recommends Interpon powder coatings which contain no organic
solvents or heavy metal pigments such as lead. With 7, 10, or 15 year global
warranty options for colour and film integrity, Interpon finishes offer high
performance and reduced maintenance.
In addition to traditional anodised finishes Capral also offers a new Satin Etch™
technology that provides an aesthetically pleasing finish whilst using less energy
and significantly reducing waste by-products.
83
Conditions of Sale
1. General
(a) Any order for the purchase of goods placed by a purchaser (order) will
incorporate these Conditions of Sale (Conditions) and any conditions contained
in a purchaser’s order are excluded, unless expressly agreed to in writing by
Capral Limited (Company).
(b) The Company reserves the right to vary these Conditions at any time by
written notice.
(c) In these Conditions, contract means a purchaser’s order when accepted by the
Company, these Conditions, any other part of this document and any other
terms and conditions agreed in writing by the Company and purchaser;
goods means the goods that the Company proposes to sell or has sold to a
purchaser, being (where relevant) the goods described on the other part of
this document, and a reference to goods includes services; GST means goods
and services tax; purchaser means the person buying goods from the Company;
and toolage means any dies, tools and other equipment which the Company
manufactures or obtains in order to produce the goods and includes all
intellectual property in or relating to the goods.
(d) The contract constitutes the entire agreement between the parties as to its
subject matter and may only be amended in writing signed by both parties.
(e) If there is any inconsistency between any of the terms of a contract, the order
of priority for the purpose of construction is:
(i) any other terms and conditions agreed in writing by the Company;
(ii) these Conditions;
(iii) any other part of this document;
(iv) the purchaser’s order.
(f) The purchaser acknowledges that it has read and accepts these Conditions
are fair and reasonable, except to the extent otherwise agreed in writing by
the parties.
2. Prices and Quotations
Unless the Company otherwise agrees in writing:
Conditions
(a) Prices quoted are based on the Company’s estimated cost of production,
manufacture or supply at the time of quotation and may be altered without
notice to the purchaser if there is any increase in the Company’s costs between
the date of quotation and the date of acceptance of the order.
(b) All goods will be charged in accordance with the Company’s prices at the
of Sale
date of acceptance of the order (plus any applicable GST) that are applicable
for the relevant delivery date, which must be paid to the Company by the
purchaser when payment for the goods is due.
(c) Prices will be rounded to the nearest whole cent in the Company’s invoices.
(d) In the case of orders for goods on the basis of the number of pieces, the
Company may apply a nominal weight (kg) to those goods to determine the
price of the goods. On request by the purchaser, the Company will disclose
85
Conditions of Sale continued
such nominal weight. The weight shown on packaging is for shipping purposes (d) If the Company determines that it is or maybe unable to deliver within a
only and should not be taken as the weight of those goods. reasonable time or at all the contract may be cancelled by the Company. If the
(e) In the case of orders by the purchaser made on the basis of weight (kg), the contract is cancelled, the purchaser will have no claim against the Company
Company may: for any damage, loss, cost or expense.
(i) calculate the number of pieces of the goods to be supplied by reference 5. Instalments
to the nominal weight of the goods; and The Company reserves the right to deliver the goods by instalments and each
(ii) calculate the price by reference to the nominal weight of the goods to instalment will be taken to be sold under a separate contract. Failure of the
be supplied; and Company to deliver any instalment will not entitle the purchaser to cancel the
(iii) supply and invoice the goods by reference to the nominal weight, rather balance of the order. If the purchaser defaults in payment for any instalment,
than the actual weight, of the goods. the Company may elect to treat the default as a breach of contract relating
(f) Shipping tolerances apply that may result in goods being over or under the to each other instalment.
quantity ordered. 6. Claims for wrongful delivery
3. Payment Any claim by the purchaser for short or wrongful delivery of the goods must
(a) Payment must be made without deduction by the last working day of the be notified to the Company in writing within 14 days of delivery of the goods.
month after the month of invoice, unless otherwise noted on the other part Any claim which the purchaser does not notify within that time (time being
of this document or agreed in writing by the Company. of the essence) will be taken to have been absolutely waived.
(b) The Company reserves the right to vary the terms of payment and to require 7. Risk & Property
payment in full prior to delivery if, at any time, the credit worthiness of the (a) Unless otherwise agreed in writing by the Company, the risk of loss of, or
purchaser is, in the Company’s opinion, unsatisfactory. If the purchaser has damage to, the goods will pass to the purchaser on delivery to the
not paid the Company in full by the due date, the Company may, at its option, purchaser. If the purchaser collects the goods or arranges for their collection
rescind the contract and resell or dispose of the goods without prejudice to from the Company then delivery will be deemed to occur on collection of
any claims for damages against the purchaser. the goods from the Company.
(c) Fees apply for payment by credit card for account customers. (b) Property in, and ownership of, the goods will not pass from the Company to
4. Delivery the purchaser until payment in full of the purchase price of the goods and all
(a) Unless otherwise agreed in writing by the Company, all costs of delivery will other amounts owing to the Company. The purchaser hereby consents to
be for the purchaser’s account. the Company registering its rights under a contract pursuant to the Personal
(b) Any date for delivery of the goods or completion of the services shown on Property Securities Act 2009 (Cth).
the other part of this document or otherwise indicated by the Company (c) Until property passes to the purchaser:
whether before or after or at the same time as the contract is made, is an (i) the purchaser will hold the goods as fiduciary and bailee for the Company;
estimated date for delivery only. The Company will not be liable for any loss (ii) the goods must be stored separately and in a manner to enable them to
or damage, however it arises, if the goods are not delivered or the services be identified and cross-referenced to particular invoices;
are not completed by that date. (iii) the Company, its employees or agents, are entitled to enter the purchaser’s
(c) Without limiting clause 4(b), the Company is not liable for any delay in delivery premises between 9.00am and 5.00pm on any business day to inspect
for any reason including, without limitation: the goods;
(i) act of God, lightning, fire, flood, explosion; (iv) unless otherwise notified in writing by the Company, the purchaser is
(ii) strike, lock-out or other labour difficulty; authorised to sell the goods in the ordinary course of the purchaser’s
(iii) breakage, accident or other damage to or failure of machinery or equipment; business; and
(iv) unavailability or shortage of raw materials, labour, power supplies or (v) the proceeds of goods sold by the purchaser are to be held in trust for
transport facilities; or the Company.
(v) failure or inability to obtain licences or the effect of any applicable laws, (d) If the purchaser fails to pay all or any part of the purchaser’s total indebtedness
orders, rules or regulations of any government or competent authority. to the Company under a contract, the Company may without notice and
87
without prejudice to any of its other rights and remedies: (e) Nothing in this clause 10 prevents the Company from supplying any third party
(i) recover and/or re-sell the goods or any of them and may enter upon the with shapes that are identical or similar to those produced from toolage
purchaser’s premises for that purpose; and maintained for the purchaser.
(ii) recover any difference between the sale or scrap value of the goods and the 11. Intellectual Property
price payable by the Purchaser for the goods. (a) The purchaser warrants that anything furnished to the Company will not cause
8. Description the Company to infringe any intellectual property rights in the execution of the
Any description of the goods is given by way of identification only and the purchaser’s order. The purchaser indemnifies the Company against any claim,
use of that description does not constitute a sale by description. loss, liability, cost and expense that may be incurred by the Company as a
9. Specifications result of any infringement or unauthorised use of intellectual property rights
(a) Unless otherwise stated on the other part of this document or agreed in arising out of the manufacture or use of the goods.
writing by the Company, the specification of the goods is in respect of (b) The sale and purchase of the goods does not confer on the purchaser any
tolerances, weight, quantity, size, dimension, finishes, chemical composition licence or rights under any intellectual property right which is the property of
and physical properties as stated in the Company’s most recent published the Company.
product data and/or in any recent applicable drawings issued by the Company, 12. Implied terms
or, if not so specified, subject to tolerances normally regarded as being All conditions and warranties expressed or implied by statute, the common
commercially acceptable. law, equity, trade, custom or usage or otherwise are expressly excluded to
(b) All illustrations, drawings and specifications remain the property of the the maximum extent permitted by law.
Company and must be treated as confidential by the purchaser (who may not 13. Warranty
copy, sell, lend or otherwise dispose of or use them without the prior written The Company will repair or replace (at the Company’s option) all goods and
consent of the Company). their components manufactured by it which the Company, in its discretion,
10. Toolage determines are defective in materials or workmanship under normal use and
(a) If the goods are manufactured from dies, tools or other equipment supplied service, as soon as reasonably practicable after the date of delivery. The liability
by the purchaser (purchaser equipment), the Company accepts no responsibility of the Company under this Condition is limited to the repair or replacement
for the shape, measure, capacity, fitness or otherwise, of the purchaser of defective goods and components. All other costs, including cartage and
equipment or the suitability of the purchaser equipment for manufacturing installation, must be paid by the purchaser. While the goods are in the custody
the goods and the Company is not liable for any loss or damage, however of the Company for investigation or repair they will be at the risk of the
caused (including negligence of the Company), to the purchaser equipment. purchaser and the Company will not be liable for any damage to the goods.
(b) All toolage remains the property of the Company and the Company is not The Company will use its reasonable endeavours to obtain for the purchaser
required to deliver such toolage to the purchaser or part with possession of it. the benefit of any applicable manufacturer’s warranty in respect of goods
This applies even where the purchaser has contributed to the cost of not manufactured by the Company.
development and manufacture of the toolage. 14. liability
(c) Where the Company has agreed that particular items of toolage will be used To the maximum extent permitted by law, the liability of the Company,
exclusively for the manufacture of goods for the purchaser, the Company will howsoever arising under a contract, is limited, at the Company’s option, to:
not use that toolage to manufacture goods for third parties or sell to third (c) the replacement or repair of the goods;
parties products manufactured from that toolage, unless: (d) the supply of equivalent goods; or
(i) the purchaser has authorised such use or sale; or (e) the cost of replacing of repairing the goods or of acquiring equivalent goods.
(ii) the purchaser has not, for a period of 36 consecutive months, purchased The purchaser agrees to release, hold harmless and indemnify the Company
from the Company any goods manufactured from that toolage; or from and against any liability whatsoever and howsoever arising (including,
(iii) the purchaser is in default under a contract. without limitation, from negligence or wilful misconduct on the part of the
(d) Where sub-clauses 10(c)(ii) or (c)(iii) apply, the Company may without reference Company or others) in connection with the sale of goods by the Company.
to the purchaser dispose of such toolage or release such toolage for general use.
89
15. Indirect loss undertakes to the Company that it will impose on the acquirer of the
To the maximum extent permitted by law, the Company is not liable in any transformed goods an obligation to notify immediately the purchaser and
way for any indirect or consequential loss including loss of profit, revenue, the Company of any defect in the transformed goods of which it becomes
reputation or opportunity, in contract, tort (including negligence) or otherwise aware after delivery and to take all reasonable steps to mitigate loss (if any)
arising in connection with a contract. arising as a consequence of the defect. The Company will not be required to
16. No limitation on statutory rights incur additional expense in repairing goods caused by the transformation of
Nothing in clauses 12, 13, 14 or 15 purports to have or has the effect on goods or the integration of goods with other goods.
excluding, limiting or modifying any rights, entitlements or remedies that may 22. Notices
be conferred on a purchaser under the Competition and Consumer Act 2011 Any notice to be given under a contract must be sent by facsimile or prepaid
(Cth) or the Sale of Goods Act 1923 (NSW) to the extent that those rights, mail to the other party’s number or address (as notified by that party from
entitlements or remedies cannot be excluded or modified by agreement. time to time).
17. Cancellation 23. Governing law and jurisdiction
If the purchaser cancels any order or refuses to accept all or any of the goods Contracts are governed by and will be construed in accordance with the laws
in an order other than in circumstances permitted in a contract, the purchaser of New South Wales and the purchaser submits to the non-exclusive
will be liable for any resulting damage or loss suffered by the Company. If the jurisdiction of the courts of that State.
goods have been or are in the process of being manufactured or produced 24. International Supply Contract
specifically for the purchaser, the purchaser will pay to the Company as The United Nations Convention on Contract for the International Sale of Goods
liquidated damages the full contract price of the goods and any costs incurred will not apply to any contract.
by the Company (including any GST) less the scrap value of the goods as 25. Confidentiality
determined by the Company. The purchaser must keep any contract confidential.
18. Interest
Without prejudice to any other rights or remedies of the Company, if any
payment is not made by the due date, the purchaser will pay on demand,
without limiting any other rights of the Company, interest at the rate of 2%
per year above the standard overdraft rate (for overdrafts under $100,000)
applied by the Company’s primary bank at the time, on the outstanding
amount, calculated from the due date for payment until payment is made in full.
19. Waiver
Failure by the Company to insist on strict performance of any term, warranty
or condition of the contract will not be taken as a waiver of it or any rights
the Company may have and no waiver will be taken as a waiver of any
subsequent breach of any term, warranty or condition.
20. Subcontracting
The Company reserves the right to sub-contract the production, manufacture
or supply of the whole or any part of the goods or any materials or services
to be supplied.
21. Notice of Defects
The purchaser must notify the Company immediately of any defect in the goods
of which it becomes aware after delivery and will take all reasonable steps to
mitigate loss (if any) arising as a consequence of the defect. If the purchaser
transforms the goods and sells the transformed goods, the purchaser
91
Notes
93
Notes
95
Scan the barcode with
a Smartphone to download
Capral‘s Little Green Book.
Tel. 1300 361 877 Fax. 1300 133 974 www.capral.com.au

© Capral Limited. Volume 5 May 2014

Little Green Book

Uploaded by

Copyright:

Available Formats

Little Green Book

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Little Green Book

Uploaded by

Copyright:

Available Formats

Capral Aluminium Centres are a one stop

trade centre offering retail and wholesale

Special Extruded Products

Accreditation and Certification

Aluminium The Super Metal

Rod and Bar

Forms Available Characteristics Forms Available Characteristics

A medium strength alloy with

Relative ratings are in decreasing order of merit = A, B, C, D (where A = most applicable).

813626 EK9103 12 12 3 – 6.5 100 100 Mill Finish 6060 T5 1.111

813627 EK9104 16 16 3 – 6.5 100 100 Mill Finish 6060 T5 1.527

841398 EK9106 20 12 3 – 6.5 100 100 Mill Finish 6060 T5 1.527

813640 EK9108 20 20 3 – 6.5 100 100 Mill Finish 6060 T5 1.95

Mill Finish 6060 T5 1.788

Mill Finish 6060 T5 1.352

Mill Finish 6060 T5 4.628

813658 EK9116 32 20 3 – 6.5 103 103 Mill Finish 6060 T5 2.581

841418 EK9117 32 25 3 – 6.5 114 114 Mill Finish 6060 T5 2.841

813662 EK9118 32 32 3 – 6.5 128 128 Mill Finish 6060 T5 3.211

© Capral Limited May 2014

809530 E20772 16 16 3 – 6.5 100 100 Mill Finish 6060 T5 2.21

114 114 Mill Finish 6060 T5 2.841

815410 EK9156 25 12 3 – 6.5 100 100 Mill Finish 6060 T5 2.262

143 143 Mill Finish 6060 T5 3.627

125 125 Mill Finish 6060 T5 1.703

815413 EK9160 32 25 3 – 6.5 158 158 Mill Finish 6060 T5 4.004

847649 EQ1556 40 20 2 – 6.5 156 156 Mill Finish 6060 T5 2.665

813727 EK9161 40 20 3 – 6.5 153 153 Mill Finish 6060 T5 3.893

813730 EK9162 40 25 3 – 6.5 174 174 Mill Finish 6060 T5 4.42

809552 E20790 40 40 3 – 6.5 232 232 Mill Finish 6060 T5 6

809134 EK9215 50 25 3 – 6.5 194 194 Mill Finish 6060 T5 4.947

813731 EK9163 50 50 3 – 6.5 294 294 Mill Finish 6060 T5 7.578

841550 EK9164 60 32 3 – 6.5 242 242 Mill Finish 6060 T5 6.214

813733 EK9165 80 25 3 – 6.5 253 253 Mill Finish 6060 T5 6.526

813735 EK9166 80 40 4 – 6.5 312 312 Mill Finish 6060 T5 10.673

841498 EK9141 20 20 3 – 4 100 100 Mill Finish 6060 T5 1.2

841506 EK9143 25 25 3 – 6.5 100 100 Mill Finish 6060 T5 2.477

813708 EK9144 40 40 3 – 6.5 160 160 Mill Finish 6060 T5 4.056

815047 E20219 50 50 4 RAD 6 195 195 Mill Finish 6082 T6 6.318

815046 E20205 50 50 6 RAD 6 195 195 Mill Finish 6082 T6 9.312

813980 EX4033 80 10 – – 4 180 180 Mill Finish 6060 T5 8.64

809391 E20061 80 12 – – 4 184 184 Mill Finish 6060 T5 10.368

852081 EX4044 80 16 – – 4 192 192 Mill Finish 6060 T5 13.824

808089 EX4049 80 25 – – 4 210 210 Mill Finish 6060 T5 21.6

813957 EX4011 100 3 – – 4 206 206 Mill Finish 6060 T5 3.24

813971 EX4026 100 6 – – 4 212 212 Mill Finish 6060 T5 6.48

813982 EX4034 100 10 – – 4 220 220 Mill Finish 6060 T5 10.8

813986 EX4042 100 12 – – 4 224 224 Mill Finish 6060 T5 12.96

852097 EX4050 100 25 – – 4 250 250 Mill Finish 6060 T5 27

969939 EP11453 150 8 – – 4 314 314 Mill Finish 6060 T5 12.952

816276 EX4027 160 6 – – 4 330 330 Mill Finish 6060 T5 10.36

816284 EX4035 160 10 – – 4 340 340 Mill Finish 6060 T5 17.28

© Capral Limited May 2014

370 370 Mill Finish 6060 T5 43.2

Mill Finish 6060 T5 3.776

Mill Finish 6060 T5 8.846

813772 EL8015 60 40 3 – 6.5 200 200 Mill Finish 6060 T5 9.899

841963 EL8016 60 50 3 – 6.5 220 220 Mill Finish 6060 T5 10.985

813774 EL8018 80 25 3 – 6.5 210 210 Mill Finish 6060 T5 10.426

813775 EL8019 80 40 3 – 6.5 240 240 Mill Finish 6060 T5 12.005