C3-Series: IP-based Door
C3-Series: IP-based Door
CR20E/M RFID Reader Exit Button Power Supply Electric Lock RS232 485
Alarm Sensor Prox Card Key Fob WiFi module with antenna
Typical Installation
EXIT
Exit Button
Wiegand
PC Wiegand
+
+
+ C3
C3_1
REV:3.0
20100518
TCP/IP + +
+ +
TCP/IP
Door Sensor
Electric Lock
Dimensions 345(L)×70(H)×280(W)mm
Specifications
C3-100 C3-200 C3-400
Number of Doors Controlled 1 Door 2 Door 4 Door
Types of Readers Supported 26-bit Wiegand, others upon request 26-bit Wiegand, others upon request 26-bit Wiegand, others upon request
Number of Inputs 2 (Exit Device and Door Status) 6 (2 Exit Device, 2 Door Status, 2 AUX) 12 (4 Exit Device, 4 Door Status, 4 AUX)
Number of Outputs 2 (1-From C Relay for Lock and 4 (2-From C Relay for Lock and 8 (4-Form C Relay for Lock and 4-Form
1-Form C Relay for Aux Output) 2-Form C Relay for Aux Output) C Relay for Aux Output)
Card Holders Capacity 30,000 30,000 30,000
Communication TCP/IP, RS-485 and WiFi optional TCP/IP, RS-485 and WiFi optional TCP/IP, RS-485 and WiFi optional
Enclosure Powder Coated Aluminium Powder Coated Aluminium Powder Coated Aluminium
Recommended Power Supply 12V DC, 1.5A 12V DC, 1.5A 12V DC, 1.5A
ZKTeco Inc. © Copyright 2016. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related
company. All other product and company names mentioned are used for identification purposes
www.zkteco.com only and may be the trademarks of their respective owners. All specifications are subject to
E-mail: [email protected] change without notice. All rights reserved.