Scribd Logo
Upload

Welcome to Scribd!

  • 74 views

    XXXXXX - 1 1-: Burns

    Uploaded by

    Jesus Rodriguez
    This document provides specifications for a secondary temperature standard with a nominal resistance of 25.5 ohms at 0°C. It includes ordering information, performance specifications, accuracy ratings, and notes on proper handling to ensure accuracy and longevity. Key details are the standard's operating temperature range of -200°C to 500°C, insulation resistance greater than 1000 megohms, hysteresis of less than 0.01°C, and long-term stability estimates of 0.01-0.1°C drift per year depending on maximum use temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    XXXXXX - 1 1-: Burns

    Uploaded by

    Jesus Rodriguez
    74 views3 pages
    This document provides specifications for a secondary temperature standard with a nominal resistance of 25.5 ohms at 0°C. It includes ordering information, performance specifications, accuracy ratings, and notes on proper handling to ensure accuracy and longevity. Key details are the standard's operating temperature range of -200°C to 500°C, insulation resistance greater than 1000 megohms, hysteresis of less than 0.01°C, and long-term stability estimates of 0.01-0.1°C drift per year depending on maximum use temperature.

    Original Description:

    sonda de temperatura RTD

    Original Title

    22 IT

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a secondary temperature standard with a nominal resistance of 25.5 ohms at 0°C. It includes ordering information, performance specifications, accuracy ratings, and notes on proper handling to ensure accuracy and longevity. Key details are the standard's operating temperature range of -200°C to 500°C, insulation resistance greater than 1000 megohms, hysteresis of less than 0.01°C, and long-term stability estimates of 0.01-0.1°C drift per year depending on maximum use temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    74 views3 pages

    XXXXXX - 1 1-: Burns

    Uploaded by

    Jesus Rodriguez
    This document provides specifications for a secondary temperature standard with a nominal resistance of 25.5 ohms at 0°C. It includes ordering information, performance specifications, accuracy ratings, and notes on proper handling to ensure accuracy and longevity. Key details are the standard's operating temperature range of -200°C to 500°C, insulation resistance greater than 1000 megohms, hysteresis of less than 0.01°C, and long-term stability estimates of 0.01-0.1°C drift per year depending on maximum use temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    19439- SHEET 1 OF 4

    RED SYM ECO NUMBER DATE APPD


    NOMINAL: 25.5 OHMS AT o·c
    RED .0039250 0/0/ºC TEMP. COEFFICENT A ECO 5505 9-25-03 JPZ
    INSULATION COLOR CODE
    WHITE�
    WHITE
    INDENTIFICATION AND SERIAL NO. LOCATION
    0 .5 TRANSITION FITTING (SERIAL# ON ONE SIDE - IDENTIFICATION#
    ON THE OTHER SIDE.)
    STAINLESS STEEL STRAIN RELIEF
    GLASS HERMETIC SEAL

    22 AWG 4-CONDUCTOR TEFLON CERAMIC POWDER PACKED


    INSULATED CABLE
    "D" SHEATH 0 D.
    .

    -------xxxxxx-----•-1
    ( 1 5)
    . INCONEL 600 SHEATH
    --- - - -�--------"LY" CABLE LENGTH
    FULLY SUPPORTED SENSING ELEMENT
    ENCLOSED IN ULTRA HIGH PURITY CERAMIC

    1-
    ------- TEMP. LIMIT -50"C TO +200ºC(WITH STANDARD CABLE)------ �
    .__ ______ "L" LENGTH :t.125 ---------

    (2.0) TEMP. LIMIT -200ºC TO +500 ºC

    NOTES:
    1. SEE SHEET #2. FOR ORDERING INFORMATION.
    2. CAUTION:
    RESISTANCE STABILITY IS HIGHLY DEPENDENT UPON -TOLERANCES- ■■•
    ■ ■"
    ••··■ Bu R Ns ENGINEERING
    1--------�1------.------------.-------------------1
    HANDLING. THEREFORE, IT IS NOT INCLUDED IN THE UNLESS OTHERWISE SPECIFIED
    STANDARD WARRANTY. THIS SENSOR IS INTENDED TO ALL DIMENSION IN INCHES !!! ...
    BE USED IN A LABORATORY SETTING AND SHOULD NOT FRACTIONS =±1/16
    BE EXPOSED TO SEVERE THERMAL SHOCK, PHYSICAL ONE PLACE .X = ±.050 SCALE N.T.S. MOUNTING AND OUTLINE DRAWING,
    SHOCK OR VIBRATION. CAREFUL HANDLING WILL ASSURE lWO PLACE .XX = ±.010 DFTM TSH 9-25-03 BUNRS SECONDARY REFERENCE
    ACCURACY AND LONG LIFE. THREE PLACE.XXX = ±.005__,
    - E ±_ _0_º _30_' CHKD JPZ 9-25-03 TEMPERATURE STANDARD, 25.5 OHM
    ,___A L-L AN_G _LES_AR_
    3. BURNS MODEL 19439 IS DESIGNED FOR LABORATORY USE SHEATH AND LEAD LENGTHS APPD JPZ 9-25-03
    WHERE WIDE TEMPERATURE RANGES (-200 ºC TO 500 ºC) PER BURNS PIN 17026
    ARE MONITORED. UN LESS OTHERWISE NOTED: DIMENSIONS IN INCHES SIZE DRAWING NUMBER REV
    SHEET 1
    ALL SURFACES 12 REF: 19453 A 19439- A
    ,e; OF 4
    ALL FINISHES IN MICRO INCHES
    ORDERING INFORMATION:
    19439 SECONDARY STANDARD, 25.5 OHMS

    "D" SHEATH DIAMETER INCHES

    -A A= SHEATH DIAMETER OF 1/4"


    -B B = SHEATH DIAMETER OF 3/16"

    "L" SHEATH LENGTH IN INCHES

    -12 12 = 12.0" SHEATH LENGTH (STANDARD LENGTH


    -L SPECIFY "L" LENGTH IN INCHES (6" MIN. / 24" MAX.)

    "LY'' CABLE LENGTH IN FEET

    -6 6 = 6 FEET (STANDARD "LY" LENGTH)


    -LY LY= SPECIFY "LY" IN FEET

    CALIBRATION

    -O O= NO CALIBRATION
    -1 1 = TABLE FROM OTO 500ºC IN 1ºC INCREMENTS
    -2 2 = TABLE FROM -200 TO 500ºC IN 1ºC INCREMENTS
    -3 3 = TABLE FROM -200 TO 300ºC IN 1ºC INCREMENTS
    (FOR PROBES < 9" IN LENGTH)

    TEMPERATURE SCALE

    -A -A= ITS-90 (CURRENT INTERNATIONAL STANDARD)


    -B -B = IPTS-68
    -C -C = CALLENDAR-VAN DUSEN (IPTS-48)

    OPTIONS (SEE SHEET #4)

    /LT14 /LT14 = GOLD PLATEO 1/4" STUD SIZE SPADE LUGS


    /LT13 /LT13 = GOLD PLATEO SIZE #8 SPADE LUGS
    /LT40 /LT40 = 5-PIN DIN PLUG
    /LT60 /LT60 = BANANA PLUG
    /LC20T40 /LC20 = SHIELDED CABLE
    /LC20T40 /LC20T40 = 5-PIN DIN PLUG WITH SHIELDED CABLE

    19439 -A -12 -6 -2 -A TYPICAL PART NUMBER

    SIZE DRAWING NUMBER REV


    •C BURNS ENGINEERING INC. SHEET 2
    MINNEAPOLIS, MINNESOTA OF 4 A 19439- A
    BURNS
    PERFORMANCE SPECIFICATIONS (NOMINAL)

    ICE POINT RESISTANCE: 25.5 OHMS NONINAL AT 0ºC


    ALPHA VALUE: .0039200 TO .0039280 OHM/OHMrC

    INSULATION RESISTANCE: 1000 MEGOHMS@ 100 VDC @20ºC


    100 MEGOHMS @ 100 VDC @ 400ºC

    HYSTERESIS: .01ºC MAX USING 0,400ºC AS THE ENDPOINTS.

    SELF HEATING: .02ºC/mW IN WELL STIRRED BATH


    THERMOELECTRIC VOLTAGE: WHEN TESTEO IN AN ICE BATH, WITH IMMERSION DEPTH FROM 4 TO 10 INCHES, THERMOELECTRIC VOLTAGE SHALL NOT
    EXCEED2µV.

    TIME CONSTANT: 9 SECONDS TYPICAL FOR 63.2% RESPONSE TO STEP CHANGE IN IMMERSION TEMPERATURE IN WATER@ 3 FT/SECOND.

    LONG TERM STABILITY: STABILITY AT 0ºC AFTER EXPOSURE TO VARIOUS UPPER TEMPERATURE LIMITS. STABILITY ESTIMATES ASSUME PERIODIC
    USAGE AT THE MAXIMIM USE TEMPERATURE DURING THE COURSE OF ONE YEAR.

    USE TEMPERATURE NOMINAL DRIFT PER YEAR

    200ºC .01ºC
    300ºC .02ºC
    400ºC .05ºC

    500ºC .10ºC

    PROBE ACCURACY: INCLUDES CALIBRATION UNCERTAINTY AND SHORT TERM REPEATABILITY - DOES NOT INCLUDE SENSOR DRIFT.

    TEMP. UNCERTAINTY
    -196ºC ±.010ºC

    o ±.007ºC

    200 ±.024ºC

    420 ±.033ºC

    I! BURNS ENGINEERING INC.


    :iiiiíllllll
    MINNEAPOLIS, MINNESOTA
    SHEET
    OF 4
    3
    SIZE

    A
    DRAWING NUMBER

    19439-
    REV

    A
    BURNS

    You might also like