Scribd
Upload
103 views10 pages

Lab # 3 PLC and HMI Initializing

The document provides instructions for an introduction to PLC programming and connections. It outlines 10 steps to create a new project in TIA PORTAL, configure a device, select the correct PLC by order number and version, add a new HMI device, and connect the PLC and HMI. The objective is to learn the basics of PLC programming and connections.

Uploaded by

NoumanShabbir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
103 views10 pages

Lab # 3 PLC and HMI Initializing

The document provides instructions for an introduction to PLC programming and connections. It outlines 10 steps to create a new project in TIA PORTAL, configure a device, select the correct PLC by order number and version, add a new HMI device, and connect the PLC and HMI. The objective is to learn the basics of PLC programming and connections.

Uploaded by

NoumanShabbir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Practical # 3

Introduction to PLC Programming.

OBJECTIVE:
To determine the basics concept of programming and PLC connections.

1. Double click on TIA PORTAL then select Create New Project.

2.Write name for the project.


3.After Creating name then click on create button.

4.Then configure a device.


5.After select configure device then select Add new device.

6.Then select plc with correct order number & version as define on plc box.
7.After selecting click add button.
8.New Window will begin, Now plc will properly selected.
9. Now for selection of HMI click on add new device.
10.After selecting HMI now make connection with existing plc .
11.Here plc and HMI are connected properly.

You might also like