100% found this document useful (1 vote)
6K views8 pages

Physics Post Office Box

1. The document describes an experiment to determine the resistance of a Weston type galvanometer using Kelvin's method with a Post Office box. 2. A Post Office box is a compact form of Wheatstone's bridge used to measure resistance. The experiment connects the galvanometer as an unknown resistance in one arm and varies resistances in the other arms to obtain balance points. 3. By recording the resistances in the other arms at the balance points for different ratio settings, the resistance of the galvanometer can be calculated using Kelvin's formula.

Uploaded by

Ashok Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
6K views8 pages

Physics Post Office Box

1. The document describes an experiment to determine the resistance of a Weston type galvanometer using Kelvin's method with a Post Office box. 2. A Post Office box is a compact form of Wheatstone's bridge used to measure resistance. The experiment connects the galvanometer as an unknown resistance in one arm and varies resistances in the other arms to obtain balance points. 3. By recording the resistances in the other arms at the balance points for different ratio settings, the resistance of the galvanometer can be calculated using Kelvin's formula.

Uploaded by

Ashok Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

PHYSICS

INVESTIGATORY PROJECT
POST OFFICE BOX

MADE BY: KARUN SHARMA


ROLL NO: 19
CLASS: 12 A
Aim: To determine the resistance of Weston type galvanometer by
Kelvin’s method using Post Office box.

Apparatus required: Post Office box, galvanometer, power supply (2v),


Resistance box, connecting wires.

Formula Used: The following formula is used for the determination of


galvanometer resistance.

G = (Q / P) R

Here, G: galvanometer resistance (CD arm resistance of P. O. Box)


P: AB arm resistance of P. O. Box
Q: BC arm resistance of P. O. Box
R: AD arm resistance of P. O. Box

Theory: A post office box is a compact form of the Wheatstone’s


bridge. In the instrument each of the arms AB & BC contains three of 10,
100 and 1000 Ω respectively as shown in Fig.1. These are called ratio
arms. The arm AD is the other ratio arm R. The key K1 is connected to
the point A and the key K2 to the point B internally as shown by the lines
drawn on the ebonite plate. The unknown, S, is connected between C &
D, the battery, E, between C & A through the key K1 and the
galvanometer, G, between D & B through the key K2. The circuit is now
exactly the same
In the Kelvin’s method the same galvanometer whose has to be
measured, is also used as an indicator for obtaining the balance
point. The galvanometer acts as its own indicator for obtaining the
balance point
S
G
A B C
P Q
E

R Box

K K
A B

FIG.1

P Q P Q

K2
G C C
A A

K2
G
R S E R E

K1 E D
D K1
Resistance Box
Fig.2
Fig.3
Procedure:
(i). Make connections as in Fig.1.
(ii). Take resistance from box and keep other plugs tight.
(iii). Keeping R = 0, insert 10 Ω s in arms P & Q. Press tapping key K1
and adjust from resistance box so that deflection is between 10 & 30.
(iv). Insert 10 Ω in R, press tapping K1 and note deflection in
galvanometer. If deflection decreases on tapping key K2, go on
repeating the observation by increasing R in steps so that on pressing K1
first and then tapping K2, the deflection increases. The value of
galvanometer lies between last two values of R.
(v). Keeping Q = 10 Ω make P = 100 Ω. Starts with 10 times the lower
value of R obtained in earlier step and increase it in steps, so that on
pressing K1 first and then K2, the deflection increases instead of
decreasing. Note last two values of R.
(vi). Keeping Q = 10 Ω make P = 1000 Ω. Starts with 10 times the lower
value of R obtained in earlier step and increase it in steps, so that on
pressing K1 first and then K2, the deflection increases instead of
decreasing. Note last two values of R.

Observations:
Sr. Ratio arms Values of R (Ω) for which deflection G (Ω) lies between
increases instead of decreasing
No.
P (Ω) Q (Ω)
G = R.(Q/P)
Result: The resistance of the Galvanometer is Ω.

Precautions:
1. Connections should not be loose.
2. Key K2 should be always pressed after pressing key K1.
3. If there is found a range of no deflection then total range should be
noted and mean of
them should be taken for R at no deflection.
4. In P.O. Box the keys should be very tight.
5. Avoid pressing keys for large time otherwise cell will be discharged.
VIVA-VOCE
Q 1. What is post office box?
Ans. It is a modified form of wheatstone bridge. It was first used in post office for determining the
resistance of telephone wires and thus to find fault in them, so called post office box.

Q 2. Why it is called post office box?


Ans. Because it is first used in post office to find faults in telegraphic wires.

Q 3. What do you mean by resistance?


Ans. It is a property of a conductor virtue of which it offers obstruction to the flow of current.

Q 4. What is the difference between ohmic and non ohmic conductors?


Ans. The conductors which obeys ohms law are called conductors, whereas the conductors which do
not obeys ohms law are called non- ohmic conductors. However, the relation V=IR is followed by both
type of conductor.

Q 5. What is the balanced condition of bridge?


Ans. In balanced condition

You might also like