RTC INSTITUTE OF TECHNOLOGY
ANANDI , RANCHI- 834 003
UNDER GUIDANCE OF
1. Dr. Israr Equbal
Department of Manufacturing Engg., NIFFT, HATIA
SUBMITTED BY
Abhishek Raj
B. Tech(Vth sem)
Rapid prototyping technologies are able to produce physical
model in a layer by layer manner directly from their CAD
models without any tools, dies and fixtures and also with
little human intervention.
RP is capable to fabricate parts quickly with too complex
shape easily as compared to traditional manufacturing
technology.
RP helps in earlier detection and reduction of design errors.
All RP techniques employ the basic five-step
process.
3. Create a CAD model of the design
5. Convert the CAD model to STL format
(stereolithography)
7. Slice the STL file into thin cross-sectional layers
9. Construct the model one layer atop another
CAD Model Creation:
◦ First, the object to be built is modeled using a
Computer-Aided Design (CAD) software package.
◦ Solid modelers, such as Pro/ENGINEER, tend to
represent 3-D objects more accurately than wire-
frame modelers such as AutoCAD, and will therefore
yield better results.
◦ This process is identical for all of the RP build
techniques.
Conversion to STL Format:
◦ To establish consistency, the STL (stereolithography,
the first RP technique) format has been adopted as
the standard of the rapid prototyping industry.
◦ The second step, therefore, is to convert the CAD
file into STL format. This format represents a three-
dimensional surface as an assembly of planar
triangles
◦ STL files use planar elements, they cannot represent
curved surfaces exactly. Increasing the number of
Slice the STL File:
◦ In the third step, a pre-processing program
prepares the STL file to be built.
◦ The pre-processing software slices the STL model
into a number of layers from 0.01 mm to 0.7 mm
thick, depending on the build technique.
◦ The program may also generate an auxiliary
structure to support the model during the build.
Supports are useful for delicate features such as
overhangs, internal cavities, and thin-walled
Layer by Layer Construction:
◦ The fourth step is the actual construction of the part.
◦ RP machines build one layer at a time from polymers,
paper, or powdered metal.
◦ Most machines are fairly autonomous, needing little
human intervention.
Clean and Finish:
◦ The final step is post-processing. This involves
removing the prototype from the machine and
detaching any supports.
◦ Some photosensitive materials need to be fully cured
before use
◦ Prototypes may also require minor cleaning and
surface treatment.
◦ Sanding, sealing, and/or painting the model will
SLS --- Selective Laser Sintering
SLA --- Stereolithography
LOM --- Laminated Object Manufacturing
FDM --- Fused Deposition Modeling
Others
Selective Laser Sintering
Application Range
◦ Visual Representation models
◦ Functional and tough prototypes
◦ cast metal parts
Advantages
◦ Flexibility of materials used
PVC, Nylon, Sand for building sand casting cores,
metal and investment casting wax.
◦ No need to create a structure to support the part
◦ Parts do not require any post curing except when
ceramic is used.
Disadvantages
◦ During solidification, additional powder may be
hardened at the border line.
◦ The roughness is most visible when parts contain
sloping (stepped) surfaces.
The Stereolithography Machine
PT CAM uses a
stereolithography machine
produced by 3-D Systems and
shown here:
Stereolithography
Patented in 1986, stereolithography started the
rapid prototyping revolution. The technique
builds three-dimensional models from liquid
photosensitive polymers that solidify when
exposed to ultraviolet light.
(FDM) is a solid-based rapid prototyping method that
extrudes material, layer-by-layer, to build a model.
A thread of plastic is fed into an extrusion head,
where it is heated into a semi-liquid state and
extruded through a very small hole onto the previous
layer of material.
Support material is also laid down in a similar
Easy fabrication
Minimal wastage
Ease of removal
Easy handling
Designing
Engineering analysis and
planning
Tooling and manufacturing
FDM 2000 Specifications Prodigy Specifications
Build Volume: 8" x 8" x 10"
•Build Volume: 10" x 10" x 10" Materials: ABS, Casting Wax
•Materials:ABS, Casting Wax
Build Step Size: 0.007", 0.010",
•Build Step Size: 0.005" to
0.013"
0.030"
Up to 4x faster than the FDM 2000
As the name implies the process laminates
thin sheets of film (paper or plastic)
The laser has only to cut/scan the periphery
of each layer
The process:
◦ The build material (paper with a thermo-setting
resin glue on its under side) is stretched from a
supply roller across an anvil or platform to a take-
up roller on the other side.
◦ A heated roller passes over the paper bonding it to
the platform or previous layer.
◦ A laser, focused to penetrate through one thickness
of paper cuts the profile of that layer. The excess
The process continued:
◦ The process of gluing and cutting continuous
layer by layer until the model is complete.
◦ To reduce the build time, double or even triple
layers are cut at one time which increases the
size of the steps on curved surfaces and the post
processing necessary to smooth those surfaces.
Wide range of materials
Fast Build time
High accuracy
Applications of LOM objects:
◦ LOM objects are durable, multilayered structures
which can be machined, sanded, polished, coated
and painted.
◦ Used as precise patterns for secondary tooling
processes such as rubber moulding, sand casting
and direct investment casting.
◦ Medical sector for making instruments.
Rapid prototyping Processes
• Other Processes
• 3D Printing
• Model Maker
• Ballistic Particle Manufacturing
Thank
you
