Scribd
Upload
173 views1 page

Data Sheet ZAS89R501

This document provides technical specifications for a 5m long M12×1 8-pin connection line with a PUR cable jacket and PP wire insulation. It lists various mechanical and electrical characteristics including an IP67 rating, operating temperature range of -25 to 80 degrees Celsius, 0.6 Nm torque limit, and suitability for drag chains and bending.

Uploaded by

bertan dağıstanlı
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views1 page

Data Sheet ZAS89R501

This document provides technical specifications for a 5m long M12×1 8-pin connection line with a PUR cable jacket and PP wire insulation. It lists various mechanical and electrical characteristics including an IP67 rating, operating temperature range of -25 to 80 degrees Celsius, 0.6 Nm torque limit, and suitability for drag chains and bending.

Uploaded by

bertan dağıstanlı
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Connection Line

M12 × 1; 8-pin

ZAS89R501
Part Number Technical Data
Mechanical Data
Connection 1 Socket, straight
Connection mode 1 M12 × 1, 8-pin
Connection 2 stripped
Torque M12: 0,6 Nm
Cable Length 5m
Diameter Cable 6,6 mm
Wire cross-section 0,25 mm²
Degree of Protection IP67
Temperature Range -25...80 °C
Material Cable Jacket PUR
Material Wire Isolation PP
Material Cap Nut CuZn, nickel-plated
Screened yes
Halogen-free yes
Drag Chain Suitable yes
Bending radius (fixed installation) >5×d
Bending radius (used in motion) > 10 × d
Travel speed (with 5 m horizontal travel distance) ≤ 3,3 m/s
Acceleration ≤ 5 m/s²
Bending cycles > 2000000

Packaging unit 1 Piece


New pin assignment

Connection Diagram No. S74


Connection Technology No. 89

Halogen free, drag chain suitability


PUR, straight
Screened
5 8
4 6
3 7

2 1

S74

Legend PT Platinum measuring resistor Encoder A


Supply Voltage + not connected Encoder B
Supply Voltage 0 V Test Input Digital output MIN
Supply Voltage (AC Voltage) Test Input inverted Digital output MAX
Switching Output (NO) Trigger Input Digital output OK
Specifications are subject to change without notice

Switching Output (NC) Analog Output Synchronization In


Contamination/Error Output (NO) Ground for the Analog Output Synchronization OUT
Contamination/Error Output (NC) Block Discharge Brightness output
Input (analog or digital) Valve Output Maintenance
Teach Input Valve Control Output +
Time Delay (activation) Valve Control Output 0 V
Shielding Synchronization Wire Colors according to
Interface Receive Path Receiver-Line DIN IEC 757
Interface Send Path Emitter-Line Black
Ready Grounding Brown
Ground Switching Distance Reduction Red
Clock Ethernet Receive Path Orange
Output/Input programmable Ethernet Send Path Yellow
Interfaces-Bus A(+)/B(–) Green
Power over Ethernet Emitted Light disengageable Blue
Safety Input Magnet activation Violet
Safety Output Input confirmation Grey
Signal Output Contactor Monitoring White
Ethernet Gigabit bidirect. data line (A-D) Encoder A/A (TTL) Pink
Encoder 0-pulse 0-0 (TTL) Encoder B/B (TTL) Green/Yellow

System Components and Software

You might also like