AITECH

Accreditation of Innovative Technologies for Housing

TABLE OF CONTENTS

I. BACKGROUND
II. AITECH COMMITTEE MEMBERS AGENCIES
III. OBJECTIVES OF THE AITECH INTER-AGENCY COMMITTEE
IV. SCOPE OF WORK AND FUNCTIONS OF THE AITECH INTER-
AGENCY COMMITTEE
V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES
VI. DEFINITION OF TECHNOLOGY
VII. CRITERIA FOR ACCREDITATION
VIII. STEPS IN ACCREDITATION
IX. PROCESS FLOW CHART
X. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION
A. Building System
B. Material Only
XI. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES
APPLIED FOR AITECH ACCREDITATION
XII. SCHEDULE OF FEES
XIII. LIST OF ACCREDITED TECHNOLOGIES

1
 I. BACKGROUND

AITECH stands for Accreditation of Innovative Technologies for Housing. It

is a system for accrediting innovative technologies for housing. AITECH was
conceived as a result of the numerous building technologies that have been
developed in the last few years using non-traditional or alternative materials
and systems. Cognizant of their potential in reducing over-all housing costs,
it has become imperative to accredit these innovative technologies for low-
cost housing.

AITECH responds to queries and requests from private manufacturers of

indigenous and innovative building materials/systems for technical and
engineering evaluation leading to accreditation of these products. The
AITECH Inter-Agency Committee reviews and accredits the technologies.

II. COMMITTEE MEMBERS

The AITECH Committee is composed of the following agencies:

 Housing and Urban Development Coordinating Council (HUDCC)

 National Housing Authority (NHA)
 Department of Science and Technology (DOST)
 Home Guaranty Corporation (HGC)
 Department of Public Works and Highways (DPWH)
 Housing and Land Use Regulatory Board (HLURB)
 Home Development Mutual Fund (HDMF)
 National Home Mortgage Finance Corporation (NHMFC)
 Construction Industry Authority of the Philippines (CIAP)
 Department of Trade and Industry – Bureau of Product Standards
(DTI – BPS)
 University of the Philippines – Building Research Service (UP – BRS)

III. OBJECTIVES OF THE COMMITTEE

The AITECH Committee acts as a review and approving body for

applications for accreditation of innovative technologies appropriate for
housing. Its main objective is to assist producers of innovative technologies
in securing acceptance of their products or systems in the market as well as
to make these technologies acceptable for funding under government
housing loan programs.

The Committee also aims to encourage and promote the use of innovative
technologies as an alternative to traditional housing construction system;
and to develop standards, guidelines, and procedures for accreditation
system.
2
IV. SCOPE OF WORK AND FUNCTIONS OF THE COMMITTEE

The AITECH Committee reviews applications for accreditation of new and

improved technologies which are appropriate for housing and can serve as
alternatives to traditional or conventional building technologies.

The Committee performs the following functions:

1. Review and approve applications for materials testing and

engineering and economic evaluation of local and/or foreign
innovative housing technologies;
2. Provide services as testing, wherein evaluating agencies conduct the
necessary validation on innovative technology systems / materials;
3. Issue certificates of validation and / or accreditation to manufacturers
/ owners of approved innovative technology systems / materials;
4. Issue implementing guidelines and procedures on the said
accreditation system for public dissemination;
5. Determine the amount of processing fee to be charged by testing /
evaluating agencies for the information of applicants;
6. Establish performance and cost standards and identify relevant tests
for building materials / systems as the basis for evaluating and
accrediting innovative technology systems / materials;
7. Review appropriate applications of new technologies and use of
innovative building materials;
8. Provider a short-list of accredited building technologies to funding
institutions and dissemination of information to other possible end-
users; and
9. Undertake such other functions as may be necessary to disseminate
information to support its primary functions.

V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES

The roles and responsibilities of participating agencies are:

1. HUDCC – gives final approval for issuance of accreditation certificate.

The HUDCC Chairman affixes his signature on the certificate.
2. NHA – evaluates applications based on checklist of requirements;
refers to evaluating agencies (UP-BRS, DOST, DPWH); evaluates
and validates costs and structural designs; and consolidates
evaluation results. Also assigned as AITECH secretariat.
3. DOST-PCIEERD – evaluates materials properties (physical,
mechanical behavior, etc); and conducts research and development
of new technologies.
4. HGC – appraises housing unit.
5. UP-BRS – evaluates structural designs, properties of building
materials, and overall technical feasibility of technologies, and
conducts information dissemination.
3
 6. DPWH-BRS – evaluates structural designs and properties of building
materials.
7. HDMF – reviews and accepts accredited technologies for mortgage
financing under UHLP and HDMF housing loan programs.
8. NHMFC – reviews and accepts accredited technologies for mortgage
financing under UHLP.
9. CIAP – disseminates information; and includes applicable
technologies in the Modular Coordination System.
10. HLURB – evaluates technologies for compliance with housing
standards based on BP 220 / National Building Code.
11. DTI-BPS – monitors quality of production through regular inspection
of local production plants; and takes charge of patenting technologies.

VI. DEFINITION OF TECHNOLOGY

The term “technology” refers to (1) new production processes of existing

systems/materials; (2) new construction techniques applied or utilized in low-
cost housing units; and (3) new building materials designed to serve as
alternatives to traditional or conventional components.

The technologies considered for application are the following:

1. Locally developed and manufactured building systems / materials
appropriated for housing including their construction techniques /
systems; and
2. Building systems / materials developed in other countries, whether
being introduced to the country or have been adopted and
manufactured locally with or without modifications.

VII. CRITERIA FOR ACCREDITATION

Innovative technologies include local and international technologies that use

non-traditional or alternative materials or system with significant reductions
in construction costs (thereby insuring affordability) as opposed to the use
of conventional materials and systems (e.g. concrete hollow blocks). In
addition, innovative technologies place emphasis on environmental
considerations.

Evaluation of Committee member agencies are based on the following:

a) Compliance to housing standards based on BP 220, PD 957 and the

National Building Code, Fire Code, BP344 & other applicable laws;
b) Structural evaluation / validation of submitted structural designs
(based on design load and allowable applied stresses);
c) Cost effectiveness based on the resulting construction costs (current
cost estimates of housing construction inclusive of mark-up) as
compared with housing units built with conventional building

4
 technologies. Use of special equipment and costs of transport
shipment of materials should also be incorporated in cost estimates;
d) Appraisal / validation of housing units using the technology for
mortgage acceptance by funding institutions;
e) Physical properties and structural soundness of technologies in
relation to health consideration and suitability to local climactic and
topographic conditions;
f) Locally available raw materials for the production / use of particular
technologies; and
g) Consistency of required quality in mass production.

VIII. STEPS IN ACCREDITATION

Technology evaluation shall be based on the information provided in all

documents submitted to the AITECH Secretariat as well as on plant and site
inspection conducted by the AITECH member-agencies. The steps in
accreditation are as follows:

1. The proponent submits AITECH accreditation application.

2. AITECH Secretariat receives application and reviews attached
documents if complete.
3. If documents are complete, AITECH Secretariat issues Order of
Payment for Evaluation Fee.
4. NHA-HTDO evaluates compliance to standards, structural design,
cost evaluation or seek assistance of support agencies. Forward to
DPWH, ASEP for complicated structural analysis, and / or to UP –
BRS / DPWH – BRS / DOST for testing.
5. Conduct of Site/Plant visit and Inspection.
6. AITECH Secretariat prepares Consolidated Report and
Recommendation to be submitted to GM for endorsement to HUDCC
Chair.
7. GM to endorse the recommendation for AITECH accreditation to
HUDCC Chair. HUDCC Chair approves recommendation and signs
AITECH accreditation certificate.
8. Secures approved AITECH accreditation certificate and informs
proponent.

5
IX. PROCESS FLOW CHART

PROCESS FLOW CHART

ACCREDITATION OF INNOVATIVE TECHNOLOGIES FOR HOUSING
(AITECH)

PROPONENT NHA OTHER AGENCIES

AITECH Secretariat receives
Submits AITECH
application and reviews
Accreditation attached documents if
Application complete

If documents are
complete

AITECH Secretariat issues

Pays fee and returns
copy of receipt V
Order of Payment for
Evaluation Fee

NHA-HTDO evaluates structural Forward to DPWH, ASEP for

design/cost evaluation or seek complicated structural analysis,
assistance of support agencies and/or to UP-BRS/DPWH-
BRS/DOST for testing

AITECH Secretariat prepares

Consolidated Report and
Recommendation to be
submitted to GM for
endorsement to HUDCC
Chair

GM to endorse the HUDCC Chair approves

recommendation for AITECH recommendation and signs
Accreditation to HUDCC AITECH Accreditation
Chair Certificate

Receives signed/approved Secures approved AITECH

AITECH Accreditation Accreditation Certificate and
. Certificate* informs Proponent

* Yearly monitoring of the accredited technology is being conducted by AITECH Secretariat

6
 X. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION

BUILDING SYSTEM

Note: All documents should be submitted in three (3) sets except for sample technology

1. Building Technology Proposal (Application Form)

2. Company Profile supported with Registration Certificate from SEC for
corporations, DTI for soles proprietorship or CDA for cooperatives.
3. Audited Financial Statements which shall include Accountants Statement and
Income Tax Return stamped and duly received by the BIR
4. Technology Brochures
5. Sample Material
6. Economic Life Span (signed warranty)
7. Test Results – Fire resistance test, Moisture resistance test, Compressive
strength test and other tests needed in the technical evaluation shall be
conducted by the following accredited testing center agencies/laboratories:

Tests Accredited Testing Agencies

Moisture Test DPWH (MATEST) 642-0664

Compressive and Tensile Test DOST 837-2071 / UP-BRS 981-8500
Fire Test FPRDI 049-5362360
Water Test LLDA 286-6143 286-6123

Note: Foreign Trade results shall be accompanied by a letter of Certification from

the Embassy where
the test was conducted
8. Copy of Title of Patent (if applicable)
9. Technical Manual
10. White/Blue print of signed and sealed Building Plans (3 sets-20” x 30” and and
3 sets-A3)
11. Building Specifications signed and sealed
12. Bill of Material / Cost Estimates (Direct Cost) and Selling Cost per unit signed
and sealed
13. Cost Comparison between the applied innovative technology , material and the
conventional
14. Structural Design Analysis and Computation in Metric System signed and
sealed
15. Photocopy of license / Architect
16. List of Completed and On-going Projects using the applied technology / material
17. Ocular inspection of Plant, Completed and On-going Projects using the applied
technology
18. Technology Power Point Presentation

7
 MATERIALS ONLY

Note: All documents should be submitted in three (3) sets except for sample material

1. Building Technology Proposal (Application Form)

2. Company Profile supported with Registration Certificate from SEC for
corporations, DTI for soles proprietorship or CDA for cooperatives.
3. Audited Financial Statements which shall include Accountants Statement and
Income Tax Return stamped and duly received by the BIR
4. Technology Brochures
5. Sample Material
6. Economic Life Span (signed warranty)
7. Test Results – Fire resistance test, Moisture resistance test, Compressive
strength test and other tests needed in the technical evaluation shall be
conducted by the following accredited testing center agencies/laboratories:

Tests Accredited Testing Agencies

Moisture Test DPWH (MATEST) 642-0664

Compressive and Tensile Test DOST 837-2071 / UP-BRS 981-8500
Fire Test FPRDI 049-5362360
Water Test LLDA 286-6143 286-6123

Note: Foreign Trade results shall be accompanied by a letter of Certification from

the Embassy where the test was conducted
8. Copy of Title of Patent (if applicable)
9. Technical Manual
10. Bill of Material / Cost Estimates (Direct Cost) and Selling Cost per unit signed
and sealed
11. Cost Comparison between the applied innovative technology , material and
the conventional
12. List of Completed and On-going Projects using the applied technology /
material
13. Ocular inspection of Plant, Completed and On-going Projects using the
applied technology
14. Technology Power Point Presentation

8
XI. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES
APPLIED FOR AITECH ACCREDITATION

MATERIALS/BUILDING SYSTEM

I. Performance Specs
1. Materials Strength
Load Bearing
400 to 600 psi 10%
Above 600 psi 15%
Non-Load Bearing
300 psi 5%
Above 300 psi 10%

2. Fire Rating
One (1) hour fire resistant 5%
Above 1 hour fire resistive rating 10%

3. Moisture
Non-Resistant 0%
Resistant 10%

4. Economic Lifespan
Below 5 yrs fail
5 to 20 yrs 5%
21 to 34 yrs 8%
35 years above 10%

5. Adaptability to Other Technologies

Non adaptable (closed system – requires 0%
special design when inter-connected
with other building materials)
Adaptable (open system – can be easily 10%
connected with other building materials)

6. Green Component
With component 0%
Without Component 10%

II. Cost compared to Conventional Construction

Below 5% fail
6 to 14% 5%
15% to 20% 10%
Above 20% 15%

III. Housing Production Rate compared to Conventional Construction

Below 10% Faster 0%
9
 10 to 20% Faster 5%
Above 20% Faster 10%

IV. Production Capacity(No. of Units Supplied/Delivered per month)

Availability of local material 5%
Existence of local plant and warehouse 5%
Warehouse only with plant abroad 3%

V. Units Completed Using Technology

0 0%
Below 20 units * 5%
Above 20 units 10%

*20 units is defined as the number of housing units considered

as mass housing (for discussion)

PROPOSED CRITERIA FOR EVALUATION OF INNOVATIVE

TECHNOLOGIES APPLIED FOR AITECH ACCREDITATION

FORMS/PAINT/SOIL STABILIZERS

I. Performance Specs
Adaptability to other Technologies
Non-Adaptable 0%
Adaptable 10%

II. Cost compared to Conventional

Below 5% fail
6% to 14 % 20%
15 to 20% 30%
Above 20% 40%

III. Housing Production Rate compared to Conventional Construction

Below 10% Faster 0%
10 to 20% Faster 20%
Above 20% Faster 30%

IV. Units Completed Using Technology

0 0%
Below 20 units 10%
Above 20 units 20%

*20 units is defined as the number of housing units considered

as mass housing (for discussion)

10
 OTHER BUILDING COMPONENTS /SEPTIC TANK / WATER TANK

I. Performance Specs
1.1 Material Strength
Tensile Strength
Below 15 MPa 5%
15MPa and above 15%

1.2 Economic Life Span

Below 5 years 5%
5 to 20 years 10%
Above 20 years 15%

II. Cost compared to Conventional

Below 10% 5%
10% to 20% 10%
Above 20% 20%

III. Production rate compared to Conventional

Below 10% Faster 5%
10 to 20% Faster 10%
Above 20% Faster 20%

IV. Production Capacity

Availability of local material 3%
Existence of local plant and warehouse 5%
Warehouse only with plant abroad 10%

V. Units Completed
0 0%
Below 20 units * 10%
Above 20 units 20%

*20 units is defined as the number of housing units considered

as mass housing (for discussion)

* (40% to 60%) - One (1) year accreditation

** (61% to 100%) - Three (3) years accreditation

XII. SCHEDULE OF FEES (subject to change)

1. One (1) to Four (4) Storey P 5,000.00
2. Five (5) Storey and Above P 12,000.00
3. Materials Only P 5,000.00

11
XIII. LIST OF ACCREDITED TECHNOLOGIES

1. MEDIUM RISE BUILDING SYSTEM

SOLID GROUP TECHNOLOGIES CORP.

My House Modular Building Technology
My House Modular Building Technology uses lightweight steel structures
interlocked or bolted with metal sandwich and roofing panel. The wall panels are
color-coated steel sandwich board made of 32mm thick double-sided steel sheets
with expanded polystyrene at the mid layer while the roof panel are one-sided or
double –sided corrugated color-coated steel sheet with expanded polyurethane
foam that is being injected. The doors are profiled bar frames and color-coated
steel sandwich board and the windows are aluminium alloy frame window with
sliding and fixed glass window. Every part of this building system is pre-engineered
for a model type that is designed for easy transport and quick construction and
dismantling for re-use.

Contact Person: Mr. Beda T. Mañalac

Solid House Bldg. 2285 Chino Roces Ave., Makati City
T: 843-1511 to 18 loc.845 /837-0195 to 98 / F: 840-3505/837-0264
Validity: November 29, 2011 to November 29, 2016

E. FLORENTINO + ASSOCIATES
Modular Ferro- Concrete (MFC) Building System
Modular Ferro Concrete (MFC) Building System is a modular building system
creatively responding to housing and building needs. It is a standard building
system that is value-engineered, structurally conceptualized, guaranteed, quality
and time controlled. MFC combines and integrates structural sheet (light to heavy
structural shapes, plates, pipes, or bars, hence the word “ferro” or iron) with
ferrocement (the science of thin shell concrete) or concrete construction to have
the features better than other system.
Contact Person: Gilberto C. Rubio, Jr.
67 Scout Reyes St., Bgy. Paligsahan, QC
T: 372-3201 / F: 372-3205
Validity: February 1, 2013 to February 1, 2018

12
MEGAWIDE CONSTRUCTION CORP.
Alufix Formworks (Alufix: Walls & Slabs)
Alufix is a hand-set formwork that covers walls and slabs in one and the same
system. It is lightweight, crane-independent and flexible for walls and slabs. The
frames are made of closed 3-chamber powder coated aluminium profile (double
groove) or 2-chamber aluminium profile (single groove).

Contact Person: Engr. Edgar Saavedra, President

20 N. Domingo Street, Brgy. Valencia, QC, 1112
T: 655-1111 / 655-7958 / 655-9164 loc. 805 / F: 655-0974
Validity: April 22, 2013 to April 22, 2018

JOSE CRIS BUILDERS

JC Wall Slab System
JC Wall slab system is a shear wall construction system composed of aluminium
forms with thickness of 13mm designed to shorten construction time. Based on the
test conducted, breaking load is 70,680N while the yield and tensile strength is 244
and 268 Mpa, respectively.

Contact Person: Mr. Austin Arcega, Managing Director

71 Timog Ave., Quezon City
T: 426-3905 / 426-3902 / 0917-8123894
Validity: July 2014 to July 2017

Amsteel Structure Tunnel Form

Use of Beam Walls & Structural slabs, in cast-in-place walls & slabs. That will be
time efficient and can deliver quality structures.

Validity: April 30, 2014 to April 30, 2017

FORMING ACCESS & SUPPORT, INC.

Aluma Easy Set Housing and Building System
Aluma Easy Set Housing and Building System is an Aluminum Panel Form with all
accessories that is manually installed & stripped for the next use. It has special

13
features that make it strongest panel in the market. It has features that make it fast
to install & strip for next. The system is versatile for use for formworks for gang wall
/ columns forms, for shuttering, for table forms & complete with accessories to use
18mm plywood for fillers. The methodology of construction is shearwall & slab (with
or w/out ream) poured monolithically of ready mix concrete on external wall with
windows & other openings, partition wall with doorway staircase & slab in 1 time
work sequence.

Contact Person : Mr. Frederick J. Erum, President

227 GP Eastbank Rd., Kapitbahayan, Bgy. Sta. Lucia,
Manggahan Floodway, Pasig City
T: 748-0424 / F: 748-0805 / C:0917-89664445
Validity: April 30, 2014 to April 30, 2017

BEC SPECIALISTS PHILIPPINES, INC.

Safe and Modular Housing Technology (SAM HT)
It is a machine forming technology that enables manufacturing like applications to
the construction industry. US patented technology is used tro form seismically and
typhoon-resistant reinforced concrete homes quickly and efficiently.

Contact Person : Mr. Patrick Oliver Gabriel

12/F Robinson's Summit Ctr, 6783 Ayala Ave., Makati City
M: 0915-3037117
Email add : [email protected]
Validity: July 2014 to July 2017

ERGO KOTO PHILIPPINES, INC.

ERGO KOTO Integrated Building System

Ergo Koto Integrated Building System is a comprehensive set of modular housing

components comprising a proprietary foundation, wall panels, flooring and roof

panels with accessories allowing construction to 5 floors much faster than

conventional construction at a cost which is marginally lower than conventional
construction.

Contact Person : Mr. Philip Ng, CEO

2634 Rockefeller St., Brgy. San Isidro, Makati City
T: (02) 819-1335
Validity: October 9, 2015 to October 9, 2016

14
BLUEPLOT DEVELOPMENT CORPORATION
Sandwich Propor Panels and Steel Bar Truss Deck System
The technology includes the Propor Sandwich Panels produced by the company
and the Special Steel Structure incorporated with the panel. Its advantages are the
following: it is fireproof, waterproof, moisture proof, fast to build, competitive in cost
compared to conventional building materials.

Contact Person: Joanalyn Flores, Secretary

Unit 1807 Echeleon Tower 2100 A. Mabini St. Malate,
Manila
M: 09156339280
Validity: June 23, 2016 to June 23, 2017

2. ONE TO TWO STOREY BUILDING

CAVITE FORM MODULE

Form Blocks
A patented precast concrete technology, load bearing that has high compression
strength. It is composed of double panels ingeniously connected parallel to each
other by 8mm steel dowels. They serve as concreting forms thereby eliminating
the cost of formworks.
Contact Person: Mr. Jaime Mendoza
3626 de Quiroz Compound, Buhay na Tubig, Imus, Cavite
T: 473-8978 / (046)875-1371 / 0918-9256281 / 0920-9460551
Email add: [email protected]
Validity: November 29, 2011 to November 29, 2016

VASQUEZ BUILDING SYSTEM CORPORATION

Vasquez Building System
The Vazquez Building System is a Filipino invention which is affordable & ideal for
mass housing projects. The technology consists of pre-fabricated columns, beams
& wall panels, designed for one or two-storey building footing. Columns are erected
on conventional footing and the beams are welded at second floor between the
columns to carry the 2nd floor slab and panels.

Contact Person: Lilibeth Legasto

No. 1269 EDSA Balintawak, Q. City
T: 363-4545; 411-5400 / F: 361-4611

Validity: July 20, 2012 to July 20, 2017

15
STERLING CONSTRUCTION AND DEVELOPMENT CORPORATION
Plaswall

Plaswall is a permanent formwork comprising a spacer and fiber cement boards

that serve as the finished wall surface. No plastering is needed when filled with
concrete where a monolithic structural bearing and shear wall is formed. It is faster
than any conventional masonry construction and eliminates time consuming
practices. Plaswall provides considerable savings in construction time thus
reducing labor cost. The system can meet all design requirements. If needed,
additional load capacity can be obtained by providing additional reinforcing bars
and/or increasing the grade of the concrete as per discretion of the Structural
Engineer.
Contact Person: Arch. Oliver Olarte
Lot 8 Block 13 Goldenville Business Park, Carmona,
Cavite
T: 889-0934 / 844-7160
Validity: February 1, 2013 to February 1, 2018

NEDSTEEL CONSTRUCTION AND DEVELOPMENT CORPORATION

Light Gauge Steel Framing System
Light Gauge Steel (LGS) Framing System is an innovative approach for building
mass housing units. LGS Frames are fabricated out of lighweight high tensile steel
coils. It is consistent material because it does not wave, split, sprinter, or burn. It’s
cost effective and environment friendly because it is from 66% recycled steel. It is
lighweight yet durable.

Contact Person: Mr. R. Donald D. Lirio, Jr., President

88 Shaw Boulevard, Oranbo, Pasig City

T: 466-3525 / TF: 738-3046 / E: [email protected]
Validity: December 1, 2013 to December 1, 2018

REALM HOMEBUILDERS
Permaforms
Permaforms is a system that has a main component of double panel boards (Fiber
Cement Board) and is adhesively separated by an adaptor that are glued at its
inner surface. The adaptor is glued at pattern that would allow the flow of concrete
inside the panel. This is in replacement or a better alternative than a conventional
concrete hollow block wall or masonry wall. Concrete in-fill & reinforcement (by
others) may vary depending on the design requirements by structural.
16
 Contact Person : Mr. Joseph James Andaya, Managing Dir.
605 Richville Tower, Alabang Zapote, Madrigal Business
Park, Alabang
T: 809-6510 to 12 / M: 0917-8880468
Validity: April 30, 2014 to April 30, 2019

LIVE IN QUARTERS STEEL CORPORATION

Lighweight Structural Framing System
Lightweight Steel Structural System is sheet steel that is framed into shapes and
sizes such as 2 x 4, 2 x 8 and so forth. Steel framing members are framed in a
process called roll forming by passing sheet steel through a series of rollers to form
the bends that make the shape, e.g. the web, flanges and lips of a stud or C-shape
because this process is done with heat (also called “cold framing”). The studs and
joists are made stronger than the original sheet steel.

Contact Person : Ms. Rose Joan Aquino, President

# 611 Boni Avenue, Brgy. Plainview, Mandaluyong City
T: 470-7447 M# 0932-8606256 / 0926-6469539
Validity: January 8, 2014 to January 8, 2017

PRISMODIAL CONSTRUCTION CORP.

ASSOCIATES: CNYD TRV (CHINA) AND JGP MODULAR SYSTEMS
Structural Insulated Panel
An innovative housing concept utilizing Structural Insulation Panel (3) TRV System
wallboard, floor and roofing pre-fabricated components making the construction
process fast and easy. Salient features of the technology are Typhoon resilient,
fire, wind and earthquake resistant.

Contact Person : Engr. Rolando Ramon Adea

297 Santo Rosario St., Plainview, Mandaluyong City
M: 0916-4814866 / 0932-7240291
Validity: July 2014 to July 2017

17
BLUE STAR CONSTRUCTION & DEVELOPMENT CORP.
Pueblocillo Building System (PBS)
PBS is an innovative technology combining maximum use of readily available local
materials and inherent Filipino craftsmaship with thoughtful design and modern
assembly line techniques.

Contact Person : Atty. Lamberto T. Tagayuna, President

Carlim V. Amandy, Contracts Officer
Garden Cottages, Bgy. Cuyambay, Tanay, Rizal
T: 413-6857
Validity: November 29, 2011 to November 29, 2016

SKS CONSTRUCTION AND DEVELOPMENT CORPORATION

SKS Structural Steel Framing System
SKS Structural Steel Framing System is a unique framing made by feeding high
tensile steel galvanized or zincalume coil to our machine which then forms the said
steel framing profile. SKS Steel Framing is perfect for mass housing as its frames
are pre-cut, pre-holed and pre-punched, making it not only cost-effective and
builder efficient, but also structurally sound. Frames are screwed and riveted
together, interlocked and erected together based on designs of a structural
engineer.
Contact Person: Mr. Stewart Kevin Plibundo, Manager
4 Apo St., Quezon City
T: 731-0011/731-0022/ F:740-5416 / M:0917-8375410
Email add: [email protected]
Validity: June 16, 2015 to June 16, 2018

MODULARIS INGENIARE INC

Pre-cast Concrete Box System Modular Houses

Modularis Ingenaire's on-site precast concrete construction system delivers fast,

inexpensive and superior modular housing solutions. It is ten times faster than
regular construction, structurally stable and conforms to National Building
Standards.

Contact Person: Alvin Cabatit, President;

Ar. Richard Agbulos, VP-Design
1152 Seneca Plaza Suite 302, E. Rodriguez Sr. Avenue, QC
M: 09175286650
Validity: September 8, 2015 to September 8, 2018

18
8990 CEBU HOUSING DEVELOPMENT CORP.
Deca Homes Precast Technology for Housing
In the early 90’s the method of construction of the housing units developed by the
8990 Group was by traditional or CHB piling wherein all walls are non-loadbearing
and main structures were reinforced footings, columns and beams. The duration
for house construction was between 45 to 60 days. In the late 90s the company
developed its Cast-in-Place technology and shortened the construction period to
25 days. In 2003, the company started to invest in the development of its own
precast technology that was perfected after one year. The Deca Homes Precast
Technology can finish a house in 8 days for the townhouse model, 7 days for the
single attached model, 18 days for the single attached loft type model and 30 days
for the 80-unit walk up condominium units. All walls are made of reinforced
concrete with a design of 3000 to 4000psi concrete strength. This enables the
company to provide decent shelter with affordable prices to the Filipino community.

Contact Person : Mr. Jesus B. Atencio, CEO

Mr. Alexander Ace S. Sotto, Gen. Mngr. - Construction
Negros St. Cebu Business Park, Cebu City
T: 412-5194 / M: 09999902705

Validity: October 9, 2015 to October 9, 2018

PALIGID DEVELOPMENT CORPORATION

Eco-Key System (for 22 sq.m. and 26 sq.m. Housing)

The board can be used for external and internal walls. Main ingredient: Calcium
silica. Fire rating: A-level. Available size: 1220mm x 2440mm; Density: 0.90 t/m3
– 1.40 t/m3; Features: 100% Asbestos free, lightweight, moisture-resistant. Easy
to work, fix and decorate.

Contact Person: Ms. Heaven Peñaflorida, Manager

210A, Orbit St. Bel-air Village Phase 2 Makati City
T: 833-0715 / M: 0936-8327363
Validity: October 9, 2015 to October 9, 2018

HAUSLAND DEV'T CORP./FIESTA COMMUNITIES INC.

Load Bearing CHB
The Hausland Load Bearing Wall are load bearing concrete hollow blocks system
designed as shear wall. The load-bearing concrete hollow blocks are laid in a
single layer after which, the vertical hollows are filled with mortar up to the top
surface thereby creating micro-columns. The reinforcements are welded together
and blocks are locked at the end corners for a more stable structure.

19
 Contact Person: Engr. Pedro M. Tolentino
HLDC Corporate Center, 43-35 Don Bonifacio Ave. Pulung
Maragul, Angeles City, Pampanga
T: 893-2935/ 625-7112
Validity: June 23, 2016 to June 23, 2019

3. HIGH RISE BUILDING

MEGAWIDE CONSTRUCTION CORP.

Mammut Formworks
Mammut System has redefined standards in wall formworks consisting of versatile
panels with complete accessories. It is crane dependent and its frames are made
of closed steel profiles with special coating. It has an all-around grooves and
assembly lock that guarantees a steepless, tight and perfectly aligned panel
connection. It is ideal for every high and large structure with concrete load capacity
of up to 100kN/m2. It brings a superior concrete finish with it all plastic 100% wood
free facing and the symmetrical tie holes and joint pattern.

Contact Person: Engr. Edgar Saavedra, President

20 N. Domingo Street, Brgy. Valencia, QC, 1112
T: 655-1111/655-7958/655-9164 loc. 805
Validity: April 22, 2013 to April 22, 2018

PHINMA PROPERTY HOLDING CORPORATION

Tunnel Form Building System
The technology utilizing Otinord Tunnel Form Works to cast walls and slabs of
concrete structure in single operation which permits the realization of durable
monolithic structure that will satisfy the construction codes of countries situated in
seismic zones such as the Philippines.

Contact Person: Mr. Willie J. Uy, CEO

Mr.George Richard F. Siton, VP for Operations
29 EDSA Mandaluyong City Manila
T: 533-777 loc 705 / 535-3462
Validity: September 8, 2015 to September 8, 2018

20
 4. WALL PANEL

SRC INT’L PANEL SYSTEM, INC.

SRC Panel
The Panel System is a wire space frame constructed similar to a truss, with a
39mm thick expanded polystyrene (EPS) core. The faces of the three-dimensional
wire frame are wires with welded intersection spaced 50mm apart in both
directions. The wire fabrics are held 75mm apart by 2.3mm diameter spreader
wires pierced diagonally through the foam core and welded 50mm apart on every
longitudinal wire on both the wire fabrics in a staggered arrangement.

Contact Person: Myrna Montaos

Victoria Wave Special Economic Zone,
Brgy. 186 N. Caloocan
T: 939-5893 / 983-8106 to 08 / F: 983-7778

Validity: June 23, 2016 to June 23, 2019

JBC INNOTECH CORPORATION

JBC Wall Panel
JBC Wall Panel is a permanent wall formworks system for external, internal or
partition walls composed of fiber cement board with EPS studs. The fiber cement
board is made up of hydral silicate, crystalline silica (quartz), cellulose fiber and
water steamed and cured in an autoclave at elevated temperature and pressure.

Contact Person: Mr. Jun Cabrera

U408, Antonio Ctr. Prime St, Madrigal Bus. Park II, Alabang
T: 659-0721 / M: 0919-5831335 / 0922-9019220
Validity: July 12, 2012 to July 12, 2017

UNION GALVASTEEL CORPORATION

Duratherm Panel and Duratherm Roofing
Duratherm Panels are polyurethane sandwiched by galvanized steel. It is used for
variety of applications, either for roofing, ceiling and walling. It provides very good
insulation because of the rigid polyurethane foam which is a very good thermal
insulator. Polyurethane foams are made up of tiny closed cells which contain gases
that prevent transfer of heat and prevents moisture or air penetration. The average
thickness of base metal for its skin panel is 0.45mm and the average thickness of

21
top paint coating is 16.6 microns. Hence, the building stays cool thereby saving
energy.
UGC’s Polyurethane Sandwich Panel

Duratherm Roofing

Contact Person: Efren M. Delid

Chipeco Ave. Ext., Bgy. Real, Calamba City,Laguna

Contact No: 520-8830 to 32 loc. 104

Validity: July 2014 to 2017

Light Metal Frames

Light Metal Framing systems can be used on ceiling framing and dry wall partitions
as it allows durability, flexibility and fast installation applicable in any type of
building construction.

Validity: February 1, 2013 to February 1, 2018

FAST WALL SYSTEMS PHILIPPINES, INC.

Fast Wall Lightweight Concrete Panel
Fast wall panels are made of polystyrene beads mixed with cement and admixtures
sandwiched between two cement boards making it light but durable and fast to
install. It is best for both exterior and interior application for any kind of building
structure. Its weight is four times lighter than CHB but it is tough and durable and
the installation is faster. No special equipment is needed to install and manpower
requirement is lesser. The panels have smooth skin where no plastering is needed
and only the joint are to be treated. It is ready to paint and no need to apply
neutralizer. The panel joints are watertight, its surface are water repellent. With the
presence of polystyrene beads, good sound and thermal insulation can be
achieved.

22
 Contact Person: Hak Choon Kim
302 Ortigas Ave. Ext., Bgy. Sto. Domingo, Cainta, Rizal
T: 656-0268 / 655-7955 / F: 656-3526
Validity: February 1, 2013 to February 1, 2018

EVOVENTUR INC.
Evo Besta Board & Evo Autoclaved Lightweight Concrete (ALC) Panel
EVO Wall System, which maybe composed of EVO Besta Board with Autoclaved
Lighweight Concrete (ALC) as the infill materials, are established building materials
which are durable, sustainable amd multipurpose, and had been tried and tested
in different construction scenarios from all over the world. The EVO Besta Board
is a mineral based modern green building material that is versatile and outperforms
traditional products such as wood boards, gypsum, and cement based products. It
can be used as exterior and cladding and sheathing, decorative board and fencing.
It comes in various thickness with recessed edges profile.

Contact Person: Jaime Albert Santos

16A Maj. Dizon St., IVC Marikina
T: 681-5393
Validity: July 2014 to July 2017

MACRO INDUSTRIAL PACKAGING PRODUCTS CORPORATION

Macro Air Sabs
Macro Air Sabs (MAS) is a composite building system that utilize Expanded
Polystyrene (EPS) as its core material for all structural members, walls, roof, floor
that is sprayed with composite coating made of precise blend of sand, cement,
glass fiber and other additives that together, create a structural wall system, slab,
roof and other parts of the building.

Contact Person : Ms. Virginia Lumanog, SVP

Mr. Ariel N. Santos, VP Manufacturing
Airstrip Rd., Canlubang Ind. Estate, Calamba City Laguna
T: 844-8994 to 95 / M: 0917-7109988 / 0927-9125760
Validity: April 30, 2014 to April 30, 2017

23
ARTY WORKS BUILDERS CORPORATION
Arty Light Energy Saving Wall
Arty Light and Energy Saving composite wall material is one of a kind composite
panel which uses thin fiber cement or calcium silicate board as panels. The middle
is filled with an expanded shale high strength, lightweight composite core material
to form a non-load bearing inorganic composite sheet. The product has these
characteristics; solid, light weight, thin bodied, high strength capacity and impact
resistance, hanging strength heat insulation, sound insulation, fire-proof,
waterproof easy cut.
Contact Person : Mr. Antonio Sy Chua, President
Ms. Jane Maxillum
Unit III Doña Anita Bldg, E. Rodriguez Avenue, Quezon City
T: 733-7767 or 69 / 239-1691 / M#0906-5584562
Validity: 08 September 2015 to 08 September 2018

GLOBAL GREEN HOUSING ASIA PHILIPPINES, INC.

KOTO Integrated Building System
KOTO Integrated Building System comprises light weight panels which provide
permanent formwork to reinforced concrete for column and beam construction of
buildings. These light weight forms are used in a variety of ways from foundation,
to flooring, walling and roofing. The system complies with the requirements of the
Unified Building Code. Applied to socialized and economic housing it can produce
finished homes in a fraction of the time taken by conventional means.

Contact Person : Mr. Joseph Alexander Uy

222 Ayala Tower 1, Ayala Ave., Makati City
M: 0917-5900965
Validity: July 2014 to July 2017

TMPC CENTRAL CONST. & DEVELOPMENT TECHNOLOGIES

Philkor Panel
Philkor is a housing panel which can be used as partitions sidings, ceilings, roofing
materials, walls, etc. and concrete hollow blocks. The panel has the following
special characteristics and features: 1) excellent thermal insulation 2) Junction type
independent structure with excellent durability 3) have variety of colors and
available patterns 4) Standard production.

Contact Person : Atty. Nelson Clemente

10 Nery St., Remmanville Executive Village, Parañaque City
M: 0917-5344541
Validity: July 2014 to July 2017

24
VERLIN KONSTRUKT INC.
Maxiwall System
The Maxiwall System is an innovative building system composed of 4.5mm thick
ficemboard with 2” x 3” metal furring and concrete fillers in between the wall with
reinforcement of 10mm making the structure more durable and stable in
replacement to the conventional CHB. In using the Maxiwall system, the week-long
plastering will be eliminated but with the same quality of work thereby reducing the
construction period of housing units. The concrete fillers between the boards
improve the stability and strength of the said partition.

Contact Person: Engr. Ana-Lyn Tape, Project Manager

9F Obispado De Cubao Bldg., #41 Lantana St., Cubao Q.C.
T:721-2464/724-3316/F:724-3316/M:0922-8953281
Validity: November 18, 2014 to November 18, 2017

NEXT CENTURY BUILDING SYSTEMS

Emmedue Panel
Polystyrene Panels Sandwiched by 2.75mm G.I wire mesh and 3mm cross
connecting wires. Used for internal and external wall partitions with load bearing
properties and others such as acoustic and heat insulation, fire retardant, seismic
resistant and rust free metals.

Contact Person: Anna Kristina Cura

0811 The Infinity Tower, 26th St., BGC Taguig City
T: 556-0200
Validity: June 23, 2016 to June 23, 2019

JEA STEEL INDUSTRIES, INC.

JEA Light Steel Frames

JEA – Light Steel Frames are the different products of JEA Steel Industries, Inc.
which are used as alternative materials for construction. The different products are
JEA Span 45 Hat-Type Purlin, JEA Span C-Purlin, JHAMBA and Light Steel
Frames for ceiling and partition, CMT-Tee Runners and J-Type runner. Said
products are made-up of light gauge materials which are fast and simple to install,
lightweight, termite proof, fire resistant and environmental friendly.

Contact Person : Mr. Reynaldo A. Monzon, Pres. & GM

Arch. Jasper Mortiga, Technical Manager
Lot 99 Kaligtasan Ext. cor. P. Samonte St. Quezon City
T: 442-2681 to 90 / 932-7210 loc. 350 / M: 0919-5989246
Validity: November 26, 2014 to November 26, 2017

25
ESERVICES GLOBAL SOLUTIONS, INC.
Serbe Block

SERBE Block is developed to improve the construction system by reduction of

cost, time of completion, manpower and providing high architectural quality and
additional features as sound reduction, thermal reduction and fire rating, water
proofing, ballistic fire penetration and sound engineering. All these revolve and rely
on the hidden structural property of the toilet roll cardboard inner core. Bonding
these toilet roll cores together creates strong resistance to compression loading.

Contact Person: Arch. Eduardo P. Urcia, Inventor

Mr. Edgardo V. Bansale, Chairman of the Board
9F Jecoprime Bldg., 21st Drive, Bonifacio Global City, Taguig
T: 856-6225/808-8808 / M#0916-6296256
Validity: 26 November 2014 to 26 November 2017

CAVITE FORM MODULES INC.

JJM Wall Formtile
The JJM Wall Formtile is a new type of wall system that is very versatile in nature
making possible various types of wall construction with relative ease, high quality
finishes, speed in construction with less cost. Said walls system uses JJM’s
versatile interlocking pre-cast concrete wall panels that are generally rectangular
in shape with varying wall finishes ranging from plain, tiled, plank, colored, and
many other decorative design.

Contact Person : Mr. Jaime Mendoza, Owner

3626 De Quiroz Compound Buhay na Tubig, Imus Cavite
T: (046) 875-1371 / M: 0920-9460551 / 0918-9256281
Email add: [email protected]
Validity: June 16, 2015 to June 16, 2018

LEXUS INDUSTRIAL ENTERPRISE CORPORATION

PPS Building Technology
An advanced System for industrial building utilizing fabricated, post-tensioned
modular elements, this system has been in use since 1955 worldwide on mass
housing, multi-storey residential blocks projects and schools etc (2.5M square
meters of projects to date) the system is fast (5-7 days per floor); economical (20-
30% less materials used); cost effective (lighter structure more efficient foundation
design plus lower material consumption=lower cost); safe (designed for Zone 4
seismic zones; Category 5 Super-typhoons of more than 24KMP wind.

26
 Contact Person: Benjamin Go, Pres./CEO; Antonio Co, Dir.
#19 San Ignacio St., Bo. Kapitolyo, Pasig City
M: 09178866926
Validity: September 8, 2015 to September 8, 2018

MDC CONQRETE INC.

Precast Concrete
Precast concrete material system is a modern construction material that is better
suit modular housing requirements. MDC's precast concrete is a precast wall and
slab to be utilized in low cost housing to build huge volume of housing units in a
short span of time at a low price but with high quality. These precast wall and slab
system use standard reinforcing bars and high concrete strength for durability and
performance of the structure. The use of precast concrete material have the
following advantages: Cost Effective, Ease of Deployment and Speed of
Construction.
Contact Person: Teresita Ronquillo Galao

Brgy. San Felix, Sto. Tomas, Batangas

T: 717-5500

Validity: June 23, 2016 to June 23, 2017

5. FLOOR AND ROOF DECK SYSTEM

JACKBILT INDUSTRIES, INC.

T-Joist Floor and Roof Deck System
T-Joist floor and roof deck slab consist of poured-in-place concrete slab and
precast prestressed inverted T-Beams called T-Joist. T-Joist is mass produced at
a controlled factory setting with the use of slipformer, cured and cut to client’s
specification. The system eliminates the use of forms which directly translates to
savings in time and money.

Contact Person: Mr. Cayetano P. Filart

21st PET Plans Tower Bldg, 444 EDSA, Guadalupe Viejo
Makati City
T: 856-1922 / 846-2222 / F: 856-6598
Validity: November 29, 2011 to November 29, 2016

27
Ribbed Slab System (Flooring)
Ribbed slab system is a system consisting of precast, pre-stressed half slabs with
concrete up strands (rib) that are purposely designed to provide the necessary
stiffness to the slab for handling, act as spacers for mesh reinforcement and to
provide a positive tie between the precast element and in situ concrete topping to
ensure a composite action between both. Its smooth soffit or slab bottom
eliminates the need for drop ceiling and is ready for painting.
Contact Person: Mr. Cayetano P. Filart
21st PET Plans Tower Bldg, 444 EDSA, Guadalupe Viejo,
Makati City
T: 856-1922 / 846-2222 / F: 856-6598
Validity: November 18, 2014 to November 18, 2017

UNION GALVASTEEL CORPORATION

Duradeck and Duraweb
Metal decking (Duradeck and Duraweb) floor structure allows durability and high
strength, fast installation ideal for residential, commercial and industrial
applications. The material is a continuous hot dipped galvanized steel.
Duradeck Duraweb

Contact Person: Efren M. Delid

Chipeco Ave. Ext., Bgy. Real, Calamba City, Laguna
T: 520-8830 to 32 loc. 104
Validity: February 1, 2013 to February 1, 2018

ARCHITECKS METAL SYSTEMS

Concrete Floor Steel Decking
Architecks Metal Systems Inc. specializes in manufacturing and marketing of
concrete floor decking. These are high tensile materials that provide strong
reinforcements and permanent floor works for concrete slab to be used for
residential, commercial and industrial structures. It saves manpower, materials,
time and cost.
Contact Person: Mr. Juan T. Ng, President;
Claudette Enriquez, Marketing Development Officer
Unit 5A 5/F DN Corporate Ctr., Brgy. South Tri. 1388, QC
T:(02) 367-8335 / (02) 351-7760
Validity: September 8, 2015 to September 8, 2018

28
UNITED STEEL TECHNOLOGY INTERNATIONAL CORP.
Steeltech Pre-Painted G.I. Roofing
Steeltech products include colored roofing materials catering to residential and
industrial requirements. Imported raw materials and paints are used in producing
coils and tested vigorously comparable to international standards to assure high
quality products.
Contact Person: Ms. Paula Dulalia, Marketing Manager
12F BPI Binondo Rosario Bldg. 560 Quintin Paredes St.
Binondo Manila
T: 567-3668 to 79 / F: 567-3503 / M: 0917-5813760
Email add: [email protected]
Validity: June 16, 2015 to June 16, 2018

Steeltech Metal Decking

STEELTECH METAL DECKING is locally manufactured galvanized sheets
integrated in formworks to speed up floor construction.

Validity Date: 09 October 2015 to 09 October 2018

OFIC PHILIPPINES
Onduline Roofing

Onduline is an attractive, lightweight but extremely tough corrugated roofing and

wall cladding material. Its proven weathering qualities coupled with the ease and
safety with which it can behandled and fixed have resulted in it being used
extensively on a wide range of buildings across the globe in all kinds of climatic
conditions.Since its development over 50 years ago Onduline has benefitted from
a continuing process of development and now offered as a roofing system
complete with a comprehensive range of accessories able to deliver effective
solutions to many of your roofing needs.

Contact Person: Roman Cristopher Alarcon

7V 7th Floor Cyber One Building, Eastwood Libis, Q.C.
TF# 570-7344
Validity: 09 October 2015 to 09 October 2016

29
PHILMETAL PRODUCTS INC.
Spandek and Durawide Roofing System
Spandek and Durawide is a pre-painted rib type roofing system made from
galvalume 55 substrate with double oven baked Polyester top coat paint, fixed
firmly through the use of pierce fasteners, J-bolt anchor or a combination of both.

Contact Person: Mr. Lito Luna, Group Marketing Director

Philsteel Tower, 140 Amorsolo St., Makati City
T: 813-8382
Validity: June 23, 2016 to June 23, 2017

6. SEPTIC TANK

WEIDA SEPTIC TANK

Polyethylene Septic Tank
A pre-fabricated septic with digestive and culturing chamber which is manufactured
using rotational mould made of premium grade resins. It is leakproof seamless unit,
lightweight, strong, rugged and resistant to impact. It is also chemical resistant and
corrosion proof. Its filter media has large surface area for optimal microorganism
growth and clogged free optimized void tratio with removable modular chamber.

Contact Person: Mr. Michael Sy

3F BT&T Ctr. 20 E.Rod.Jr. Ave.(C-5)Brgy. Bagumbayan, QC
706-2002 / TF: 706-4966
Validity: November 29, 2011 to November 29, 2016

STONEWORKS SPECIALIST INT’L CORP

Fiberglass Septic Tank
Fiberglass Septic Tank has Two chambers: the decomposing chamber (anaerobic
section), and the filtering strainer. The design and construction is generally a
cylindrical body (straight type) with a totally closed bottom portion thus avoiding
fowling and poisoning of the soil. The design includes a filtering basket with a
spacedly arranged apertures, located at the wall segregating the digestion
chamber and bacterial filtration. Charcoal and limestone gravel are used as
filtration media to filter the sludge from the digestion chamber.

30
 Contact Person: Mr. Jesus SJ. Felipe, President/COO
8358 Dr. A. Santos Ave. Sucat, Parañaque City
Contact No.: 046-4022893
Validity: November 11, 2013 to November 11, 2018

YOONNI GREENTECH CORPORATION

Yoonni Septic Tank
Yoonni Septic Tank is recycled three chamber purifying septic tank made from
LDPE plastic. It is composed of a tank body having an associated cover mounted
on the top position. The cover has a vertically disposed vent while the tank has an
inlet and outlet post. The septic tank has a reinforcement consisting of lateral and
longitudinal plastic ribs making it durable and easy to install.

Contact Person : Mr. Soon Baek Seo,President;

Ms. Susana Lopez,Manager
Esguerra St. Longos, Pulilan, Bulacan
T: (044) 795-0807 / M: 0922-8325596 / 0917-8520535
Validity: January 8, 2014 to January 8, 2019

7. PAINT

FIRST ASIAN BRIGHT STAR MARKETING CORP.

Contractor Grade Flat White Latex–AB 500 & Premium White Flat Latex
Eggshell Finish are USA manufactured household paint suitable for exterior and
interior. It is water based, non-flammable, non-toxic, odorless and lead-free. The
p[aints are quick drying with stain resistant formulated and mildew resistant
coating. Flat latex has a coverage of 28.37 sq.m. per gallon.

Contact Person: Mr. Antonio Umali, Jr.

117 Champaca Street UPS 4, Parañaque City
T: 823-3724 / E: [email protected]
Validity: May 9, 2012 to May 9, 2017

31
 8. SOIL STABILIZER

ISA GREENPATH ENTERPRISES, INC.

Eco base 300 Soil Stabilizer
Eco base 300 Soil Stabilizer are liquid stabilizer designed to improve the
structure/integrity of road construction where soil becomes chemically bonded
making it harder and water resistant. The result is a road that exhibit high sheer
strength to improve soil bearing capacity that is weather-proof, easily workable and
can be compacted to a better particle cohesion by equipment and traffic.
Contact Person: G. John Reyes
20 Fordham Street, St. Ignatius Village, QC
T: 736-6562 / TF: 913-1260 / M: 0915-8333049
Email Add: [email protected]
Validity: May 9, 2012 to May 9, 2017

9. FENCE

VAZQUEZ BUILDING SYSTEMS CORP.

Vazbilt Prefab Fences
Vazbilt Prefab Fences is a modular concrete fence system using interlocking wall
panels columns and tie beams designed with versatility that gives a warm,
aesthetic and clean appearance while providing strength and security well beyond
CHB. With finished texture on both sides, the tongue and groove system has a
quick, clean and efficient installation even during rainy days. Its assembly is clean
unlike messy hollow block laying and plastering.

Contact Person: Lilibeth Legasto

No. 1269 EDSA Balintawak, Quezon City
T: 363-4545 / 411-5400 / F: 361-4611
Validity: February 1, 2013 to February 1, 2018

32
 10. WALL MATERIAL

JAMES HARDIE PHILIPPINES

Hardieflex Sheets, Hardieflex Senepa & Pro

HardieFlex Sheets is a smooth, flat sheet which comes in a natural gray color that
can be set to create a seamless look. HardieFlex Senepa is a smooth fascia board
which comes in a variety of widths and lengths. HardieFlex Pro is a premium
sanded and sealed HardieFlex sheet with dimensions designed specifically for the
average toilet and bath size in the Philippines, to ensure less jointing and wastage.
Contact Person : Mr. Bobby Molina
Bgy. San Isidro, Cabuyao, Laguna
T: 895-2994 / M: 0918-8183958 / 0922-8783558
Email add: [email protected]
Validity: November 26, 2014 to November 26, 2017

SCG SMART BOARD

SCG Smart Board
SCG Smart Board is a non-asbestos fiber cement board made of SCG Portland
cement with silica, sand and cellulose fiber through autoclave process specially
designed for various internal and external wall, ceiling and floor applications.

Contact Person: Heherson B. Bala, Marketing Exec.

U903 9F Lot3 Blk.7, 3rd Ave.cor.31st St., BGC, Taguig
T: 501-8630/8635 /621-3060 M: 0917-8176461 / 717- 6900
Email add: [email protected]
Validity: June 16, 2015 to June 16, 2018

THE THAI OLYMPIC FIBER-CEMENT COMPANY, LTD.

Fiber Cement Building Material
Fiber cement board composed of Portland cement, sand and cellulose fiber.
Economic lifespan is 50 years.

Contact Person: Mr. Isabelo Dingal, Sr Marketing Manager

Lvl.10-1 One Global Place 25th St. & 5th Ave, BGC, Taguig
T: 224-2088 / F: 224-2077 / M: 0906-2103646
E: [email protected] / [email protected]
Validity: June 16, 2015 to June 16, 2018

33
CENTRAL LUMBER CORPORATION
GARDNER Fiber Cement
GARDNER fiber cement products are made with the latest German hatscheck
machine and technology. It is made from a combination of cellulose fiber, sand,
and premium quality Portland Contact Person: Peter Lu, Managing Director
cement which are autoclaved to
27/F BPI Corp. Centre, Buendia Makati City
produce high quality, durable
T: 464-9202/464-9001
fiber cement board, wood and
Validity: June 23, 2016 to June 23, 2017
PFC. As such Gardner products
are strong, does not shrink, and are impressively flexible. They are fire, water,
moisture, weather-, termite, insect and rot resistant; does not contain asbestos and
are environment friendly.

Contact Person: Mr. Jeffrey Sinco, CEO, President

Bldg.3 Marcelo Compound, 67 Gov. Pascual St., Malabon
T: (02) 361-8933 / 361-9560
Validity: October 9, 2015 to October 9, 2018

TAGUMPAY IEM DEVT. INC.

Fiber Cement EPS
It is made up of extruded polystyrene or expanded foam board core, covered on
both sides with fiber cement board.

KNAUF GYPSUM PHILIPPINES INC.

Knauf Gypsum Board
Knauf Gypsum Boards is manufactured from raw materials tested to the highest
standard using state of the art technology. The high quality of Knauf Gypsum
Boards permit its use in a wide range of residential, commercial and industrial
applications typically in walls and ceilings. The basic gypsum board product uses
Knauf specialist forming technology to produce a gypsum core sandwiched
between high strength paper liners. Using Knauf technology the basic gypsum
product can be modified to allow designers and architects to use Knauf Boards in
fire resistant, water resistant, impact resistant and even X-Ray resistant
applications. This is achieved using specific advanced additives to change the
properties to the gypsum core.

34
 Contact Person: Wayne Studdon, General Manager-SEA
6/F Citibank Center Bldg., Paseo De Roxas, Makati
Validity: June 23, 2016 to June 23, 2017

BORAL PLASTERBOARD PHILIPPINES, INC

USG Boral Standard Core Plasterboard
USG Boral Standard Core is suitable for both ceiling and wall apllication. It can be
fixed to timber, metal framing and masonry construction, while providing an
economical yet high quality finish to any interior projects. The technology has
significant properties for durability and suitability. It is composed of gypsum
plastercore encased in heavy duty face and backing liner. The product is
environmentally friendly and non-hazardous to work with.

Contact Person: Mr. James Lajom, Arch'l. Services

8 Mercury Avenue, Bagumbayan, Quezon City
T: 911-6709 M: 09178724101
Validity: June 23, 2016 to June 23, 2017

35