Datasheet Transistor 2N2222A

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

NPN Switching Transistor

Features:

• High current (Maximum 600 mA)

Applications:

Designed for high speed switching application at collector current up to 0.5 A and feature useful
current gain over a wide range of collector current, low leakage current and low saturation
voltage

TO-18

Absolute Maximum Ratings (Ta = 25°C)


Symbol Parameter Value Unit

VCBO Collector - base voltage 75 V

VCEO Collector - emitter voltage 40 V

VEBO Emitter - base voltage 6 V

IC Collector current 0.8 A

Total dissipation at TA = 25°C 0.5 W


Ptot
Total dissipation at TC = 25°C 1.8 W

TJ Junction temperature 175 °C

Tstg Storage temperature -65 to 200 °C

Thermal Characteristics
Symbol Parameter Maximum Unit

Rth j-a Thermal resistance, junction to ambient 300 °C/W

Rth j-c Thermal resistance, junction to case 83.3 °C/W

www.element14.com
www.farnell.com
www.newark.com

Page <1> 11/11/11 V1.1


This datasheet has been downloaded from http://www.digchip.com at this page
NPN Switching Transistor

Electrical Characteristics (TC = 25°C Unless Otherwise Specified)

Symbol Parameter Conditions Minimum Maximum Unit

V (BR) CBO Collector - base breakdown voltage IC = 10 µA; IE = 0 75 - V

V (BR) CEO Collector - emitter Breakdown Voltage IC = 10 mA; IE = 0 40 - V

V (BR) EBO Emitter - base breakdown voltage IC = 10 µA; IE = 0 6 - V

ICBO Collector cut off current VCE = 60 V; IB = 0 - 10 nA

IEBO Emitter cut off current VEB = 3 V; IC = 0 - 10 nA

VCE (sat) 1 Collector - emitter saturation voltage IC = 150 mA; IB = 15 mA - 0.4 V

VCE (sat) 2 Collector - emitter saturation voltage IC = 500 mA; IB = 50 mA - 1 V

VBE (sat) 1 Base - emitter saturation voltage IC = 150 mA; IB = 15 mA 0.6 1.2 V

VBE (sat) 2 Base - emitter saturation voltage IC = 500 mA; IB = 50 mA - 2 V

HFE1 DC current gain IC = 0.5 A; VCE = 10 V 40 - -

HFE2 DC current gain IC = 0.15 A; VCE = 10 V 100 300 -

fT Transition frequency IC = 20 mA; VCE = 20 V; f = 100 MHz 300 - MHz

CEBO Emitter base capacitance IC = 0; VEB = 0.5 V; f = 100 MHz - 25 pF

CCBO Collector base capacitance IC = 0; VEB = 10 V; f = 100 MHz - 8 pF

Part Number Table


Description Part Number

NPN Switching Transistor 2N2222A

Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.

www.element14.com
www.farnell.com
www.newark.com

Page <2> 11/11/11 V1.1

You might also like