XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Features General Description

„ Wide 5V to 40V Input Voltage Range The XL6019 regulator is a wide input range,
„ Positive or Negative Output Voltage current mode, DC/DC converter which is
Programming with a Single Feedback Pin capable of generating either positive or
„ Current Mode Control Provides Excellent negative output voltages. It can be configured
Transient Response as either a boost, flyback, SEPIC or inverting
„ 1.25V reference adjustable version converter. The XL6019 built in N-channel
„ Fixed 180KHz Switching Frequency power MOSFET and fixed frequency
„ Maximum 5A Switching Current oscillator, current-mode architecture results in
„ SW PIN Built in Over Voltage Protection stable operation over a wide range of supply
„ Excellent line and load regulation and output voltages.
„ EN PIN TTL shutdown capability The XL6019 regulator is special design for
„ Internal Optimize Power MOSFET portable electronic equipment applications.
„ High efficiency up to 94%
„ Built in Frequency Compensation
„ Built in Soft-Start Function
„ Built in Thermal Shutdown Function
„ Built in Current Limit Function
„ Available in TO263-5L package

Applications
„ EPC / Notebook Car Adapter
„ Automotive and Industrial Boost /
Buck-Boost / Inverting Converters
„ Portable Electronic Equipment

Figure1. Package Type of XL6019

Rev 1.1 www.xlsemi.com

1
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Pin Configurations

Figure2. Pin Configuration of XL6019 (Top View)

Table 1 Pin Description

Pin Number Pin Name Description

1 GND Ground Pin.
Enable Pin. Drive EN pin low to turn off the device, drive it
2 EN
high to turn it on. Floating is default high.
3 SW Power Switch Output Pin (SW).
Supply Voltage Input Pin. XL6019 operates from a 5V to 40V
4 VIN DC voltage. Bypass Vin to GND with a suitably large
capacitor to eliminate noise on the input.
Feedback Pin (FB). Through an external resistor divider
5 FB network, FB senses the output voltage and regulates it. The
feedback threshold voltage is 1.25V.

Rev 1.1 www.xlsemi.com

2
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Function Block

Figure3. Function Block Diagram of XL6019

Typical Application Circuit
L1 47uH/5A
D1 MBRD1045

R2
49.9K
SW 1%
3
VIN FB
4 XL6019 5
1 2 C2 COUT
R1
GND EN 2.7K 105 220uF/35V
VIN CIN C1 1%
ON
220uF/35V 105
OFF

Boost Converter
Input 12V ~ 22V
Output 24V / 1.5A
VOUT=1.25*(1+R2/R1)
Figure4. XL6019 Typical Application Circuit (Boost Converter)

Rev 1.1 www.xlsemi.com

3
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Ordering Information
Order Information Marking ID Package Type Packing Type Supplied As
XL6019E1 XL6019E1 TO263-5L 800 Units on Tape & Reel

XLSEMI Pb-free products, as designated with “E1” suffix in the par number, are RoHS compliant.

Absolute Maximum Ratings（Note1）

Parameter Symbol Value Unit
Input Voltage Vin -0.3 to 45 V
Feedback Pin Voltage VFB -0.3 to Vin V
EN Pin Voltage VEN -0.3 to Vin V
Output Switch Pin Voltage VOutput -0.3 to 60 V
Power Dissipation PD Internally limited mW
Thermal Resistance (TO263-5L)
RJA 30 ºC/W
(Junction to Ambient, No Heatsink, Free Air)
Maximum Junction Temperature TJ -40 to 150 ºC
Operating Junction Temperature TJ -40 to 125 ºC
Storage Temperature TSTG -65 to 150 ºC
Lead Temperature (Soldering, 10 sec) TLEAD 260 ºC
ESD (HBM) >2000 V

Note1: Stresses greater than those listed under Maximum Ratings may cause permanent damage
to the device. This is a stress rating only and functional operation of the device at these or any
other conditions above those indicated in the operation is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.

Rev 1.1 www.xlsemi.com

4
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

XL6019 Electrical Characteristics

Ta = 25℃;unless otherwise specified.
Symbol Parameter Test Condition Min. Typ. Max. Unit
System parameters test circuit figure4
Feedback Vin = 12V to20V, Vout=24V
VFB 1.213 1.25 1.287 V
Voltage Iload=0.1A to 1A
Vin=12V ,Vout=24V
ŋ Efficiency - 93 - %
Iout=1A

Electrical Characteristics (DC Parameters)

Vin = 12V, GND=0V, Vin & GND parallel connect a 100uf/50V capacitor; Iout=0.5A, Ta =
25℃; the others floating unless otherwise specified.
Parameters Symbol Test Condition Min. Typ. Max. Unit
Input operation voltage Vin 5 40 V
Shutdown Supply Current ISTBY VEN=0V 70 100 uA
VEN =2V,
Quiescent Supply Current Iq 2.5 5 mA
VFB =Vin
Oscillator Frequency Fosc 144 180 253 KHz

SW OVP VSW VFB =0V 60 V

Switch Current Limit IL VFB =0V 5 A

Vin=12V,
Output Power NMOS Rdson 110 120 mohm
ISW=5A

High (Regulator ON) 1.4 V

EN Pin Threshold VEN
Low (Regulator OFF) 0.8 V

EN Pin Input Leakage IH VEN =2V (ON) 3 10 uA

Current IL VEN =0V (OFF) 3 10 uA

Max. Duty Cycle DMAX VFB=0V 90 %

Rev 1.1 www.xlsemi.com

5
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Typical System Application (Recommend output current safe work range)

Recommend output current safe work range Recommend output current safe work range
2000 2600
1900
2400
1800
1700 2200 VOUT=24V
1600 VOUT=12V
1500 2000
1400 1800

Output current(mA)
Ouput current(mA)

1300
1200 1600
1100 1400
1000
900 1200
800 1000
700
600 800
500 600
400
300 400
200
200
100
0 0
5 6 7 8 9 10 11 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Input voltage(V) Input voltage(V)

Figure5.Max output current (VOUT=12V) Figure6.Max output current (VOUT=24V)

Recommend output current safe work range Recommend output current safe work range
2600 2000
1900
2400
1800
2200 1700
1600 VOUT=48V
2000 VOUT=36V 1500
1800 1400
Output current(mA)
Ouput current(mA)

1300
1600 1200
1400 1100
1000
1200 900
1000 800
700
800 600
600 500
400
400 300
200
200
100
0 0
10 12 14 16 18 20 22 24 26 28 30 32 20 22 24 26 28 30 32 34 36 38 40
Input voltage(V) Input voltage(V)

Figure7.Max output current (VOUT=36V) Figure8.Max output current(VOUT=48V)

Rev 1.1 www.xlsemi.com

6
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Typical System Application(VIN=12V,VOUT=24V)

L1 47uH/5A
D1 MBRD1045

R2
49.9K
SW
1%
3
VIN FB
4 XL6019 5
1 2 C2 COUT
R1
GND EN 105 220uF/35V
2.7K
VIN CIN C1 1%
ON
220uF/35V 105
OFF

Figure9. XL6019 Typical System Application (VIN=12V,VOUT=24V)

Efficiency VS Output current

100

95

90

85

80
Efficiency(%)

75 VIN=12V,VOUT=24V

70

65

60

55

50
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
Output current(A)

Figure10. XL6019 System Efficiency Curve (VIN=12V, VOUT=24V)

Rev 1.1 www.xlsemi.com

7
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Typical System Application(VIN=5V,VOUT=12V)

Figure11. XL6019 Typical System Application (VIN=5V,VOUT=12V)

Efficiency VS Output current

95

90

85

80
Efficiency(%)

75 VIN=5V,VOUT=12V
70

65

60

55

50
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Output current(A)

Figure12. XL6019 System Efficiency Curve (VIN=5V, VOUT=12V)

Rev 1.1 www.xlsemi.com

8
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Typical System Application(VIN=10~32V,VOUT=36V)

Figure13. XL6019 Typical System Application (VIN=10~32V,VOUT=36V)

Efficiency VS Output current

100

95

90

85

80
Efficiency(%)

75 VIN=12V,VOUT=36V
VIN=24V,VOUT=36V
70

65

60

55

50
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Output current(A)

Figure14. XL6019 System Efficiency Curve (VIN=10~32V, VOUT=36V)

Rev 1.1 www.xlsemi.com

9
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Typical System Application(VIN=20~40V,VOUT=48V)

L1 47uH/5A
D1 B560C

R2
75K
SW 1%
3
VIN FB
4 XL6019 5
1 2 C2 COUT
R1
GND EN 105 220uF/63V
2K
VIN CIN C1 1%
ON
220uF/50V 105
OFF

Figure15. XL6019 Typical System Application (VIN=20~40V,VOUT=48V)

Efficiency VS Output current

100

95

90

85

80
Efficiency(%)

75 VIN=24V,VOUT=48V
VIN=36V,VOUT=48V
70

65

60

55

50
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Output current(A)

Figure16. XL6019 System Efficiency Curve (VIN=20~40V, VOUT=48V)

Rev 1.1 www.xlsemi.com

10
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Typical System Application(VIN=10~30V,VOUT=12V)

Figure17. XL6019 Typical System Application (VIN=10~30V,VOUT=12V)

Typical System Application(VIN=10~30V,VOUT=±12V)
VOUT -12V
C4
L1C 220uF/35V
D2 B560C

C3
22uF/63V
VOUT +12V
D1 B560C
L1A L1B

R2
24K
CDC 22uF/63V 1%
SW
3
VIN FB
4 XL6019 5
C2 COUT
1 2
R1 105 220uF/35V
GND EN 2.74K
VIN CIN C1 1%
ON
220uF/50V 105
OFF

SEPIC + - Converter
Input 10V ~ 30V
Output +-12V / 1A
VOUT=1.25*(1+R2/R1)

Figure18. XL6019 Typical System Application (VIN=10~30V,VOUT=±12V)

Rev 1.1 www.xlsemi.com

11
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Package Information
TO263-5L

Dimensions In Millimeters Dimensions In Inches

Symbol
Min. Typ. Max. Min. Typ. Max.
A 4.440 4.570 4.650 0.175 0.180 0.183
B 0.710 0.870 0.970 0.028 0.034 0.038
C 0.360 0.380 0.640 0.014 0.015 0.025
C2 1.255 1.270 1.285 0.049 0.050 0.051
D 8.390 8.640 8.890 0.330 0.340 0.350
E 9.960 10.160 10.360 0.392 0.400 0.408
e 1.550 1.700 1.850 0.061 0.067 0.073
F 6.360 6.860 7.360 0.250 0.270 0.290
L 13.950 14.350 14.750 0.549 0.565 0.581
L2 1.120 1.270 1.420 0.044 0.050 0.056

Rev 1.1 www.xlsemi.com

12
 XL6019

180KHz 60V 5A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

Important Notice
XLSEMI reserve the right to make modifications, enhancements, improvements, corrections or
other changes without notice at any time. XLSEMI does not assume any liability arising out of
the application or use of any product described herein; neither does it convey any license under
its patent rights, nor the rights of others. XLSEMI assumes no liability for applications assistance
or the design of Buyers’ products. Buyers are responsible for their products and applications
using XLSEMI components. To minimize the risks associated with Buyers’ products and
applications, Buyers should provide adequate design and operating safeguards. XLSEMI
warrants performance of its products to the specifications applicable at the time of sale, in
accordance with the warranty in XLSEMI’s terms and conditions of sale of semiconductor
products. Testing and other quality control techniques are used to the extent XLSEMI deems
necessary to support this warranty. Except where mandated by applicable law, testing of all
parameters of each component is not necessarily performed.
For the latest product information, go to www.xlsemi.com.

Rev 1.1 www.xlsemi.com

13