Scribd
Upload
47 views1 page

Checking of Plotplans and Plant Layouts

This document outlines procedures for checking plotplans and plant layouts. It describes verifying plotplans against four checklists to ensure quality: 1) an administration checklist to ensure changes are properly recorded, 2) a safety checklist, 3) a technical content checklist, and 4) equipment clearance guidelines. Attachments with the specific checklists are referenced. The purpose is to safeguard engineering quality and ensure applicable design standards are followed.

Uploaded by

steepa22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
47 views1 page

Checking of Plotplans and Plant Layouts

This document outlines procedures for checking plotplans and plant layouts. It describes verifying plotplans against four checklists to ensure quality: 1) an administration checklist to ensure changes are properly recorded, 2) a safety checklist, 3) a technical content checklist, and 4) equipment clearance guidelines. Attachments with the specific checklists are referenced. The purpose is to safeguard engineering quality and ensure applicable design standards are followed.

Uploaded by

steepa22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Checking of Plotplans and Plant layouts

Table of content

1. Purpose
2. Checking of Plotplans
3. Recording of Changes
4. References
5. Attachments

1. Purpose
This procedure, by the application of checklists, describes the safeguarding of quality aspects of
engineering work in the development of plotplans and plant layouts. It covers the requirements to
ensure that the applicable specified design basis, regulatory requirements, codes and standards are
correctly translated in their development within the Engineering Department.
2. Checking of Plotplans
The plotplans and plant layouts shall be verified as a minimum against four lists, as follows:
2.1 Checklist for Administration
All changes on the plotplans shall be recorded properly on the revision lists and the marked-up issues
filed. Attachment 1 contains checklist that covers the administrative aspects of plotplan control.
2.2 Safety Checklists for Plotplans
All questions of the safety checklist shall be verified against the plotplan, see Attachment 2.
2.3 Checklist for Technical Content of Plotplans
All questions of the checklist will be verified against the plotplan drawing, see Attachment 3.
2.4 Equipment Clearance GuidelineGenerally, clients have their guidelines on clearances between
equipment and or local regulations exist. In absence of this data, the figures mentioned in Attachment
4 shall be used as a guide.

You might also like