Parker Moduflex Valve System

Catalogue PDE2536TCUK
PDE2536TCUK
Moduflex Valve System - P2M

! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is
important that you analyse all aspects of your application and review the information concerning the product or system in the current product catalogue. Due to the variety of operating conditions and applications for these
products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the
application are met. The products described herein, including without limitation, products features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

SALE CONDITIONS
The itms described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions stated in
Parker’s standard terms and conditions of sale (copy available upon request).

Parker Hannifin Corporation

Pneumatic Division - Europe
2
PDE2536TCUK
Moduflex Valve System - P2M Summary

Summary...............................................................................................................................Page

Product Overview ................................................................................................................................. 4 - 7

Cylinder working speed charts .............................................................................................................. 8 - 9

Technical characteristics ................................................................................................................... 10 - 13

Ordering Guide ................................................................................................................................. 14 - 31

Basic modules order code ......................................................................................................... 16 - 27

V Series .............................................................................................................................. 16 - 19

V Series - IO-Link ................................................................................................................ 20 - 21

T Series, Lockable connector IP67 and Clip connector IP40 ............................................... 22 - 23

S Series, Lockable connector IP67 and Clip connector IP40 ............................................... 24 - 25

P Series .............................................................................................................................. 26 - 27

Complete modules order code .................................................................................................. 28 - 31

T Series, Lockable connector IP67 and Clip connector IP40 & V Series ..................................... 29

S Series, Lockable connector IP67 and Clip connector IP40 ...................................................... 30

P Series ..................................................................................................................................... 31

Valve Island Head Module Port Sizing ...................................................................................................... 32

Maintenance ..................................................................................................................................... 33 - 34

Dimensions ....................................................................................................................................... 35 - 41

Recommendations - Machines to U.S. Standard ..................................................................................... 42

V Series electrical and fieldbus modules - Connection and Configuration .......................................... 43 - 48

Parker Hannifin Corporation

Pneumatic Division - Europe
3
PDE2536TCUK
Moduflex Valve System - P2M

Moduflex Valve System

The Moduflex Valve System

redefines flexibility for
pneumatic users. Whether
configured from basic
components or ordered
as a pre-assembled and
tested valve island,
Moduflex flexibility is
unmatched in the market
place.

V Series Innovative
V Series
The 6 patents awarded to the
Moduflex Valve System reflect that
innovation is core to the Parker
design process. Maintaining a clear
understanding of our customer’s
Multi wiring expectations has defined the
individuality of the Moduflex, and
Fieldbus & IO-Link clearly differentiated it as a leading
automation solution.

T Series
Adaptive
No other system can be adapted
so simply once specified. Unique,
captive fitting release system,
quick release electrical connectors
and single mechanical screw
Lockable Connector IP67 connection between manifolds
Clip Connector IP40 offer the ultimate capability for late
system design changes.

S Series Multi-Functional
From stand-alone valves to
fieldbus ready valve islands, from
cylinder flow controls to vacuum
generators with integrated blow-
off, the Moduflex Valve System
meets the requirements of the
Lockable Connector IP67
whole automation spectrum.
Clip Connector IP40

Light-weight
P Series An As-i compatible valve manifold
with 8 electrical inputs and 8
pneumatic outputs weighs a mere
800grams, making the Moduflex
Valve System the perfect choice
for end of arm tooling application.

Parker Hannifin Corporation

Pneumatic Division - Europe
4
PDE2536TCUK
Moduflex Valve System - P2M

Moduflex Valve technology

Two technology platforms enable the compact design and

high performance of the Moduflex Valve System.
The compact dual 4/2 and 3/2 valves utilise well proven
Parker seal technology. The standard 4/2 valves adopt the
long life super durable ceramic switching technology.

Dual 4/2 valve 4/2 Valve

Moduflex Complete Control

With the introduction of the dual 4/2 size 1 valves, Moduflex

now offers unrivalled ability of matching valves to exact flow
requirements, ensuring cost and space are minimised.
In addition, Moduflex Valve System offers all the necessary
control peripherals to provide a complete automation
solution. Moduflex is the complete control package.

Vacuum
generator Pressure regulation
module

• Dual pilot operated

check valve
• Flow Control
• Pressure regulator
• Vacuum / Blow off module. Dual flow Dual pilot operated
control check valve module
module

Parker Hannifin Corporation

Pneumatic Division - Europe
5
PDE2536TCUK
Moduflex Valve System - P2M

With high performance technology, Moduflex opens a new era in the field of electro-pneumatic automation.
Valves are easily assembled into compact islands that conform to any application requirement.

Adaptive pneumatic

With the Moduflex Valve design, pneumatic automation

is now totally flexible.
. Valves may be stand-alone or assembled into short or long
islands, depending on application.

. IP 65-67 water and dust protection allows the valve to be

installed near the cylinders for shorter response time and
lower air consumption.

. The IP40 water and dust protection allows an optimised

electrical connection for applications into cabinet or soft and
none aggressive environments.
stand-alone valve short valve island
. Valve island electrical connections may be integrated.

. Push-in pneumatic connectors may be straight or elbow,

for 4, 6, 8 or 10 mm OD tubes.

. A given island may incorporate different valve sizes in order

to fulfill each cylinder flow requirement.
A single island will accommodate all cylinders, up to
100 mm bore size.

. Island modifications are easy: add or remove a valve, change

a valve function, change tubing size or change piloting in
minutes.

. Manual overrides are also adaptive: locking for set up, or long valve island straight or elbow
non-locking for production. pneumatics connectors

Easy man-machine dialog

. Moduflex incorporates LED indicators, manual overrides

(MAN), in conjunction with valve symbols and identification.
LED

. As compared to traditional 5/2 valve islands, Moduflex offers Identification

a more user friendly dialogue: each marking, LED and MAN
Manual
are all lined up with the corresponding cylinder output.
Override

Valve symbol

4
and 2 2 4
MAN 4 2 LED
Island with LED LED MAN MAN Island with
traditional 5/2 Moduflex 4/2
spool valves: slides valves:
Before any Each marking,
action, LED and LED and MAN
MAN have to be line up with the
carefully related to corresponding
the corresponding output.
output.
Man-machine
Man-machine dialogue is easy.
dialogue is difficult.

Parker Hannifin Corporation

Pneumatic Division - Europe
6
 PDE2536TCUK
Moduflex Valve System - P2M

Adaptive design
individual electrical connector
Lockable M8 Connector - IP67 or Clip Connector - IP40

or Valve Bank with integrated 3 valves sizes in the same valve bank
IP65 electrical connections

Size 2 Size 1 Size 01

All functions All functions Dual 4/2 Sgl Sol

Flows and tube connections

Size 2 Size 1 Size 01

Optimal nominal section for a full flow with appropriate fitting Nominal section 40 mm2 Nominal section 12 mm2 Nominal section 4 mm2

Qn 800 NI/mn* Qn 310 NI/mn*

3 valve sizes lead to a Qmax 1340 NI/mn*
* For 3/2 functions
Qmax 510 NI/mn*
* For 3/2 functions
Qn 165 NI/mn*
Qmax 275 NI/mn*

global choice of tube Qn 450 NI/mn

Qmax 805 NI/mn
Qn 235 NI/mn
Qmax 415 NI/mn

sizes, thus covering all

Tube size Ø Ext. Ø Ext. Ø Ext. Ø Ext. Ø Ext.
to cylinder 10 mm 8 mm 6 mm 4 mm 4 mm

usual applications Cylinder

bore size
Ø 63 to
Ø 100 mm
Ø 40 to
Ø 63 mm
Ø 25 to
Ø 40 mm
Ø 6 to
Ø 25 mm
Ø 6 to
Ø 25 mm

Adaptive pneumatic connection

Valve outputs
are equipped
with clip-on
push-in tube
connectors with
a choice of
straight or elbow 6 mm 8 mm 10 mm 12 mm 4 mm 6 mm
in different sizes

Typical cylinder speeds are shown on next pages. Module size, tube diameter and length, cylinder size, load and exhaust collection are taken into account.

Parker Hannifin Corporation

Pneumatic Division - Europe
7
PDE2536TCUK
Moduflex Valve System - P2M

Cylinder working speed charts

The charts below give the cylinder working speeds at 6 bar, under different conditions:
- non loaded or 50 % loaded double acting cylinder;
- exhaust piped through 2 m. long tubing, or exhaust muffled.

valve tube tube tube Cylinder bore size

cylinder working module ID OD length 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm
speeds, in cm/s
1 m. 43 cm/s 28 cm/s
standard conditions: Size 1 2 x 4 mm
3 m. 27 17
l double acting cylinder 1 m. 85 52 33 cm/s
2.7 x 4 mm
l working pressure: 3 m. 55 34 21
P = 6 bar 1 m. 167 100 62 41 cm/s 27 cm/s
2 m. 157 86 54 37 23
4 x 6 mm
specific conditions: 4 m. 125 73 46 31 19
8 m. 94 57 36 24 14
exhaust piped through
tube 2 m long, with next 1 m. 146 102 67 40 cm/s 25 cm/s
Size 2 5.5 x 8 mm
ID above ID tube from 3 m. 122 84 54 32 20
valve to cylinder.
1 m. 125 78 46 30
6 x 8 mm
non loaded cylinder 3 m. 105 65 39 25
1 m. 135 88 53 33
7 x 10 mm
3 m. 120 77 47 30
1 m. 94 57 40
8 x 10 mm
3 m. 85 53 37

valve tube tube tube Cylinder bore size

cylinder working module ID OD length 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm
speeds, in cm/s
1 m. 32 cm/s 20 cm/s
standard conditions: Size 1 2 x 4 mm
3 m. 21 13
1 m. 65 43 25 cm/s
l double acting cylinder 2.7 x 4 mm
l working pressure: 3 m. 43 27 16
P = 6 bar 1 m. 100 85 53 36 cm/s 22 cm/s
2 m. 93 75 44 30 19
4 x 6 mm
4 m. 83 62 36 24 15
specific conditions:
8 m. 68 46 27 18 11
exhaust piped through
1 m. 83 67 44 27 cm/s 18 cm/s
tube 2 m long, with next Size 2 5.5 x 8 mm
ID above ID tube from 3 m. 79 54 35 21 15
valve to cylinder. 1 m. 77 51 32 21
6 x 8 mm
50% loaded cylinder 3 m. 69 43 26 17
1 m. 88 59 37 24
7 x 10 mm
3 m. 81 51 30 21
1 m. 63 39 27
8 x 10 mm
3 m. 58 35 25

Parker Hannifin Corporation

Pneumatic Division - Europe
8
PDE2536TCUK
Moduflex Valve System - P2M

Field of application :

- stand-alone valve modules S series

- valve island modules, T series and V series
Note : a complete machine cycle includes:
- the cylinder displacement times that can be deducted from the cylinder speeds given below
- the cylinders starting times that depend on the cylinder strokes and thus could not be included
in the charts below.

valve tube tube tube Cylinder bore size

cylinder working module ID OD length 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm
speeds, in cm/s
1 m. 43 cm/s 27 cm/s
standard conditions: Size 1 2 x 4 mm
3 m. 27 17
l double acting cylinder 1 m. 88 54 34 cm/s
2.7 x 4 mm
l working pressure: 3 m. 55 34 22
P = 6 bar 1 m. 170 98 62 42 cm/s 26 cm/s
2 m. 150 85 55 37 23
4 x 6 mm
specific conditions: 4 m. 125 70 45 31 19
8 m. 95 56 35 24 15
muffled exhaust
(non collected) 1 m. 181 126 80 48 cm/s 30 cm/s
Size 2 5.5 x 8 mm
3 m. 134 91 58 35 22
non loaded cylinder
1 m. 139 89 54 34
6 x 8 mm
3 m. 112 70 43 27
1 m. 148 94 57 37
7 x 10 mm
3 m. 125 81 49 31
1 m. 102 60 42
8 x 10 mm
3 m. 90 55 38

valve tube tube tube Cylinder bore size

cylinder working module ID OD length 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm
speeds, in cm/s
1 m. 35 cm/s 22 cm/s
standard conditions: Size 1 2 x 4 mm
3 m. 23 14
1 m. 67 44 27 cm/s
l double acting cylinder 2.7 x 4 mm
l working pressure: 3 m. 44 28 17
P = 6 bar 1 m. 100 87 56 38 cm/s 23 cm/s
2 m. 93 77 46 31 19
4 x 6 mm
4 m. 83 63 37 25 16
specific conditions:
8 m. 69 46 28 18 12
muffled exhaust
1 m. 102 85 54 33 cm/s 22 cm/s
(non collected) Size 2 5.5 x 8 mm
3 m. 87 61 40 24 16
50% loaded cylinder
1 m. 91 59 37 25
6 x 8 mm
3 m. 77 46 29 19
1 m. 98 63 40 26
7 x 10 mm
3 m. 87 54 33 22
1 m. 68 43 30
8 x 10 mm
3 m. 61 38 27

Parker Hannifin Corporation

Pneumatic Division - Europe
9
PDE2536TCUK
Moduflex Valve System - P2M

Two technology platforms

Ceramic switching technology

The well proven Parker seal For single 4/2 functions
technology

WCS
Wear Compensating System

For 3/2 and dual 4/2 functions

Visualisation LED's
Pneumatic valve body For easy man-machine dialog

Configurable manual override

For locking, non-locking or Clip connector - IP40
condamned manual override Economic connection
for traditional wiring

24 V DC solenoid valve
M8 - 3 pins for lockable
connector - IP67
For traditional wiring

Pneumatic symbol
4 mm orientable
push-in fitting
Locking system For pneumatic
for clip-on fittings remote pilot

Internal connection
Up to 19 solenoids

Associating tie-rod
For easy module assembly
Straight or elbow clip-on push-in fittings Auxiliary channels
For size 1: 4 or 6 mm OD tubing Independent pilot pressure
For size 2: from 6 to 12 mm OD tubing and exhaust

Material Specification Certification

Plastics: Polyamide reinforced fibreglass EMC / CE mark: According to EN 61 000-6-2

Screws: Zinc plated steel Dust & water protection: According to EN 60529 - NEMA 4
Seals: Nitrile rubber - S & T series: M8 connector: IP67
Valve mechanism: Aluminium alloy Clip connector: IP40

Plate: Ceramic - V series: IP65*

* For Sub-D 25 connection: IP40 or IP65 depending on the cable

Parker Hannifin Corporation

Pneumatic Division - Europe
10
PDE2536TCUK
Moduflex Valve System - P2M

Moduflex specifications answer most industries automation requirements.

Applications run from clean room electronic manufacturing to process industries in aggressive environments.
Pneumatic specifications
General Specification
Air or Inert gas, Filtered 40μ (class 5 according to ISO 8573-1)
Fluid Dry (class 4 according to ISO 8573-1) or Lubricated
(with lubricated air, we recommend external pilot supply with non lubricated air)
Operating Pressure -0,9 to 8,0 bar
Piloting Pressure 3/2 N.C. or N.O. 3,5 to 8,0 bar
for operating pressures below, use external pilot
4/2 single solenoid 3,0 to 8,0 bar
by configuring the head module accordingly
(function available on standard head module) 4/2 double solenoid 3,0 to 8,0 bar
S Series Internal
Pilot supply
T & V Series Mixed internal/external (configurable on the standard head module)
Exhaust collection All collectable (including pilot solenoid valve exhaust)
3/2 N.C. or N.O. 60 million operations (with dry air, 2 Hz, 20°C, 6 bar)
Life cycle (all sizes)
Single and Dual 4/2 100 million operations (with dry air, 2 Hz, 20°C, 6 bar)
Clip connector
Lockable connector -15°C to 60°C
Operating temperatures
Multiwiring connector
Fieldbus 0°C to 55°C
Stocking temperatures -40°C to 70°C
Vibration resistance 2G - From 2 to 150 Hz (According to IEC 68 - 2 - 6)
Impact resistance 15G - 11 ms (According to IEC 68 - 2 - 27)
Flow specifications Dual 4/2 Dual 3/2 Single 3/2 Single 4/2
Q max. (Nl/mn) 275 415 415 510
Size 1
Qn (Nl/mn) 165 235 235 310
Q max. (Nl/mn) - 805 805 1340
Size 2
Qn (Nl/mn) - 450 440 800

Electrical specifications

Pilot solenoid Specifications

Electric Connector M8 Clip connector

Rated Voltage 24 Vdc
Electric Connection Not polarized Polarized
Allowable voltage fluctuation -15% to +10% (at 20°C) +/- 10% (at 20°C)
Coil insulation type Class B Class F
Without lockable connector: 1W
Power consumption 1W
With lockable connector: 1,2W
Visualisation and surge protection Included into lockable connector Included on pilot solenoid
Manual override Configurable: Locking or non-locking, isolated if required
Response Time 3/2 N.C. or N.O. Actuating: 10 ms
of the complete
4/2 single solenoid Return: 15 ms
valve
(with connector) 4/2 double solenoid 10 ms
Duty factor ED 100%
S & T Series IP67 (with lockable connector) IP40 (with clip connector)
Dust and Water
protection Guillotine connector of fieldbus: IP65
V Series
Sub-D 25: IP40 or IP65 (depending on the cable)

Communication module specifications

All protocols EMC / CE mark According to EN 61 000-6-2 & EN 50081-2
AS-interface AS-i line According to EN 50295
Module consumption 70 mA max. (2 slaves)
Max supply for all inputs 240 mA (including internal input consumption)
Internal input consumption 9 mA for each active input
Inputs According to IEC 1131-2 classe 2
IO-Link IO-Link specification According to V1.1.2
Speed communication Com2 - 38 kBd
Module Voltage Module powered by IO-Link master
Module consumption 1.5 W max.
Outputs protection Overload protection
Device protocols Profibus DP DeviceNet CANopen interBus-S
Bus Line According to each bus specification
Module Voltage 20 to 30 V DC
Module consumption 1,5 W max. 2 W max.
Outputs Overload protection

Parker Hannifin Corporation

Pneumatic Division - Europe
11
PDE2536TCUK
Moduflex Valve System - P2M P series - Vacuum module

Technical characteristics

Vacuum module

Fluid Materials
Compressed air or inert gas, filtered 40µ mini., not lubricated
Body: Polyamide 6,6 reinforced fibreglass
Working pressure
1 to 8 bar Poppet: Nitrile

Working temperature Nozzle: Brass

-15°C to +60°C
Clip connector: Treated steel

Pressure sensor

Fluid Materials
Air or inert gas, filtered 40µ mini., not lubricated
Body: Polycarbonate
Working temperature
0°C to +50°C

Supply
10,8 to 30 V DC

Digital output
PNP 125 mA

Connection drawing

Electrical or pneumatic
actuated valves Pressure sensor
Vacuum generator
3/2 blow-off 2 2
1 2 Vacuum cup
Blow-off
reservoir
Check
1 3 valve Speed
control
3/2 vacuum

Double check 3
Exhaust
4 valve
1 Venturi

Parker Hannifin Corporation

Pneumatic Division - Europe
12
PDE2536TCUK
Moduflex Valve System - P2M P series - Vacuum module

Specific characteristics

Maximum vacuum Air consumption

Vacuum level: 90% at 6,5 bar Consumption: 46 Nl/min at 5 bar

Vacuum flow
Flow: 25Nl/min at 0 % vacuum and 6,5 bar

Evacuation time in s/l to reach different vacuum levels % (at P = 6,5 bar)

Vacuum % 0 10 20 30 40 50 60 70 80 90

Time in s 0,0 / 0,0 0,3 / 0,3 0,4 / 0,5 0,8 / 0,9 1,4 / 1,5 2,0 / 2,2 2,7 / 3,2 3,7 / 4,9 5,9 / 9,8 10,7 / -

Flow in NI/min 24,9 / 23,2 22,1 / 20,3 19,3 / 17,3 16,6 / 14,4 13,8 / 11,5 11,0 / 8,5 8,2 / 5,6 5,5 / 2,7 2,7 / 0,0 0,0 / -

With silencer / With captured exhaust *

Performances

Vacuum level Vacuum flow Air consumption

% vacuum in %

Flow in Nl/min

Flow Nl/min
W
ith
W si
ith le
ca nc
pt er
ur
ed
ex
ha
us
t*

P in bar vacuum% P in bar

* 1 m exhaust - tube Ø6 mm
3 m exhaust - tube Ø8 mm

Parker Hannifin Corporation

Pneumatic Division - Europe
13
PDE2536TCUK
Moduflex Valve System - P2M

Operating information
Dual 4/2 Dual 3/2 3/2 4/2
Working pressure -0,9 to 8 bar
Pilot pressure 3 to 8 bar *
Size 1 Qmax. 275 l/min 415 l/min 415 l/min 510 l/min
Working temperature -15 °C to 60 °C
Protection individual M8 connectors IP 67 NEMA4 Qn 165 l/min 235 l/min 235 l/min 310 l/min
Protection individual clip connector IP40
Protection integrated connectors IP 65 Size 2 Qmax. - 805 l/min 805 l/min 1340 l/min
Voltage 24 V DC
Qn - 450 l/min 440 l/min 800 l/min
* Single and double 3/2 3,5 to 8 bar

Total ordering flexibillity Ordering options

In addition to the complete product adaptability, the Moduflex valve 1 - Basic modules ordering
range offers ordering flexibility for V, T, S and P series with 3 different
designs; from all components separately ordered (basic module) to Using this option, all basic components are separately
pre-assembled and tested valve island. ordered :

Basic Complete Pre-asssembled - Head and Tail set

module module valve island - Valve modules
- Intermediate module kit
- Peripheral modules
- Pneumatic connectors, mufflers and plugs
- Electrical connection or fieldbus module

The complete bill of material needed for the valve island

assembly can be easily details using page 1 of the
Moduflex Valve Configurator software report.

Stand-alone
valve module

Peripheral
2 - Complete modules ordering
module
Using this option, modules are defined, ordered and
supplied, pneumatic connectors and electrical
connection equiped. One part number defines:

- Function module
- Pneumatic connectors, muffler and plugs
- Electrical connection and cable

For an entire valve island configuration, the list of

complete modules can be easily details using page 3
of the Moduflex Valve Configurator software report.

3 - Pre-assembled valve islands ordering

Using this option, the complete valves island configuration
has to be defined, and may be ordered, delivered fully
assembly and tested under one part number.

The Moduflex Valve in-line e-Configurator software is

an easy way for a clear definition of the requested valve
island configuration.

Parker Hannifin Corporation

Pneumatic Division - Europe
14
PDE2536TCUK
Moduflex Valve System - P2M

V series T series S series P series

Integrated connection field bus Individual connector valve islands Stand alone valves Peripheral modules
or multi-connector valve island Solenoid clip or lockable connector Solenoid clip or lockable connector Flow control, check valves,
or remote air pilot or remote air pilot pressure regulator, vacuum

Pages 16-19 Pages 22-23 Pages 24-25 Pages 26-27

Pages 28-29 Page 30 Page 31

Moduflex Valve in-line e-Configurator

T series

V series

Parker Hannifin Corporation

Pneumatic Division - Europe
15
PDE2536TCUK
Moduflex Valve System - P2M V series

Integrated connections valve islands: V series

In a V series Moduflex valve island, electrical controls are all received by
the head module and transmitted to the concerned valve modules through
the modular integrated circuit.

The head module may either be a cable multi-connector or a Fieldbus

communication module: the next pages show multi-connector cable and
a complete choice of bus protocols.

Valve island electrical head module:

Valve island configuration
multi-connector or field bus connection The following page shows all valve sizes head and tail module set and sometimes an
and functions that may enter into a V series intermediate module set with 4 configuration
valve island and, for each valve size, a plates for different functions.
choice of clip-on pneumatic connectors: To receive its electrical controls, the island
tubing size, straight, elbow etc. is completed by an electrical head module,
To receive its pressure supply and collect its either a multi-connector or by a bus module
exhaust, the island also requires a pneumatic to be chosen from the next pages.

Tail
Island head Valve island assembly plate
module assembly

Pneumatic
head
module

LED
Island mounting and marking for easy man / machine dialog
Labelling Torx T8 screw driver
Manual (order code : P2M1K0TASD)

Valve island assembly override

The above illustration presents:

- Step 1 : the electrical head module is
engaged into the pneumatic head
module ; 3 mm dia.
- Step 2 : valve modules are one by one maxi.
screwed onto each other starting from
Island assembly with
the head module. For this task, the single
a single screw per module
integrated screw is tightened with a torx
T8 standard screwdriver.

The pneumatic connectors may be clipped

or unclipped at any stage.
Modules and island ordering
With a LED, a manual override and a labelling Choice between 3 approaches: 2 - Complete modules ordering:
for each valve pilot (see illustration), the island 1 - Basic modules ordering: Page 27 shows the ordering chart for
front face eases the "man / machine" dialogue. The following page shows these modules modules supplied with their connectors.
supplied without connector, together with 3 - Assembled island ordering:
The resulting valve island length is expressed the choice of clip-on connectors separately Page 30 shows the valve island configurator
by the drawing below, while further size supplied (10 units packs). This approach gives CD-Rom to specify a valve island that may be
details and mountings are presented on the the maximum flexibility. delivered assembled.
dimensions pages.

Field bus Multi-connector head module: Valve modules Valve module Intermediate Tail
head module: . guillotine, width: 47 mm size 1: size 2: module: plate:
. width: 94 mm . sub-D 25, width: 56 mm . width: 25 mm . width: 37.5 mm . width: 25 mm . width: 16 mm

Typical V series island combining different valve flows and functions

Parker Hannifin Corporation

Pneumatic Division - Europe
16
PDE2536TCUK
Moduflex Valve System - P2M V series

Basic modules (without connector)

Valve Modules Size 1 Size 2
Symbol Description Weight (g) Order code Weight (g) Order code
Size 1
4/2 Solenoid spring 94 P2M1V4ES2CV P2M2V4ES2CV
100

4/2 Double solenoid 103 P2M1V4EE2CV P2M2V4EE2CV

110

2 x 3/2 NC + NC 106 P2M1VDEE2CV P2M2VDEE2CV

115
with exhaust check valves

2 x 3/2 NO + NO 106 P2M1VCEE2CV P2M2VCEE2CV

115
with exhaust check valves

Size 2 2 x 3/2 NC + NO 106 P2M1VEEE2CV P2M2VEEE2CV
115
with exhaust check valves

2 x 4/2 Solenoid spring 114 P2M1VJEE2CV

with exhaust check valves

3/2 NC 102 P2M1V3ES2CV P2M2V3ES2CV

110
with exhaust check valves

4/3 Centre exhaust 106 P2M1VGEE2CV P2M2VGEE2CV

115
2 x 3/2 NC + NC
without exhaust check valves

Island head and intermediate module sets

Valve Modules Size 2
Description Weight (g) Order code

Valve island pneumatic 64 P2M2HXT01
head and tail module set
P2M2HXT01

Valve island intermediate 68 P2M2BXV0A
supply module with a set
of 4 configuration plates
P2M2BXV0A

Clip-On pneumatic connectors *

Valve Modules Size 1 Size 2
Description Tube OD Weight (g) Order code Weight (g) Order code

Straight connector G1/8" 2 FMDG1-1

4 mm 2 FMD04-1
6 mm 3 FMD06-1 3 FMD06-2
8 mm 4 FMD08-2
10 mm 5 FMD10-2
12 mm 6 FMD12-2
Elbow connector G1/8" 3 CMDG1-1
4 mm 3 CMD04-1
6 mm 5 CMD06-1 5 CMD06-2
8 mm 6 CMD08-2
10 mm 7 CMD10-2
12 mm 8 CMD12-2
Silencer 5 MMDVA2
Plug 3 PMDXX1 5 PMDXX2
* Fittings and plugs pack quantity: 10

Electrical multi-connection and field bus head modules

Multiconnector or field bus head module to be chosen from next pages.

Parker Hannifin Corporation

Pneumatic Division - Europe
17
PDE2536TCUK
Moduflex Valve System - P2M V series

V series valve island: Electrical multi-connector head module

Description Protection Cable length Weight (g) Order code

Guillotine type Multi-connection 38 P2M2HEV0A

head module

Guillotine connector IP65 2 m 335 P8LMH20M2A

with flying leads 5 m 802 P8LMH20M5A
multi-cable 9 m 1425 P8LMH20M9A

Standard Sub-D 25 type Multi-connection 60 P2M2HEV0D

head module

Sub-D 25 connector IP40 3 m 435 P8LMH25M3A

with flying leads 9 m 1425 P8LMH25M9A
multi-cable IP65 9 m 1425 P8LMH25B9A

V series valve island: Electrical field bus head modules for AS-i protocol

Standard AS-i protocol (up to 31 nodes) electrical head modules

Input Weight (g) Order code

Electrical module for 8 outputs max.
connections
• V series islands may have up to
8 solenoid pilots No input 150 P2M2HBVA10800

• 2 nodes per module, 4 I / 4 O per node 8 M8 inputs 200 P2M2HBVA10808A

8 inputs on 4 M12 200 P2M2HBVA10808B

Electrical module for 4 outputs max.

• V series islands may have up to No input 150 P2M2HBVA10400
4 solenoid pilots
8 inputs on 4 M12 200 P2M2HBVA10404B
• 1 node per module, 4 I / 4 O

AS-i version 2-1 protocol (up to 62 nodes) electrical head modules

Electrical module for 6 outputs max.

None 150 P2M2HBVA20600
• V series islands may have up to
6 solenoid pilots 8 M8 inputs 200 P2M2HBVA20608A
• 2 nodes per module, 4 I / 3 O per node
8 inputs on 4 M12 200 P2M2HBVA20608B

AS-i head module accessories

Description Connector type Weight (g) Order code

Cable quick connect connector M8 Male 25 P8CS0803J

P8CS0803J M12 Male - A coding 25 P8CS1204J

P8CSY1212A « Y » shape M12 Male - 2 x M12 Female 25 P8CSY1212A

Addressing cable 1 meter M12 Male - Jack 100 P8LS12JACK

Parker Hannifin Corporation

Pneumatic Division - Europe
18
PDE2536TCUK
Moduflex Valve System - P2M V series

V series valve island: Electrical field bus head modules for device bus
Electrical modules for 16 outputs
(The V series modules may have up to 16 solenoid pilot valves)

Description Bus Protocol Bus In / Bus Out Power supply Weight (g) Order code

Moduflex Bus Profibus DP M12 - B coding M12 - A coding 250 P2M2HBVP21600

Communication module For GSD file, go to http://www.parker.com/pneu/moduflex

DeviceNet M12 - A coding M12 - A coding 250 P2M2HBVD21600

M12 - B coding 250 P2M2HBVD11600

For EDS file, go to http://www.parker.com/pneu/moduflex

CANopen M12 - A coding M12 - A coding 250 P2M2HBVC21600

M12 - B coding 250 P2M2HBVC11600

For EDS file, go to http://www.parker.com/pneu/moduflex

InterBus-S M23 - 9 Pins M12 - A coding 300 P2M2HBVS11600

Device Bus connection accessories

Description Bus Protocol Connector type Weight (g) Order code

Power
supply female All M12 - A coding 25 P8CS1205AA
straight connector
DeviceNet M12 - B coding 25 P8CS1205AB
CANopen
P2M2HBVP21600

Bus IN DeviceNet M12 - A coding 25 P8CS1205AA

female connector CANopen

Profibus DP M12 - B coding 25 P8CS1205AB

Bus OUT DeviceNet M12 - A coding 25 P8CS1205BA

male connector CANopen

P8CS1205AA
Profibus DP M12 - B coding 25 P8CS1205BB

Line termination DeviceNet M12 - A coding 25 P8BPA00MA

CANopen

Profibus DP M12 - B coding 25 P8BPA00MB

M12 - A coding connector M12 - B coding connector

Parker Hannifin Corporation

Pneumatic Division - Europe
19
PDE2536TCUK
Moduflex Valve System - P2M V series

Valve Island V Series with IO-Link connection

The 24 DO Moduflex IO-Link module allows a very
simple and cost efficient connection to any IO-Link master,
centralised into the PLC or decentralised through an
industrial Ethernet network.
Designed in both Class A and Class B versions with an
isolated auxiliary power, it can easily be adapted to all
power supply architectures and follow machine directives
IO-Link

Moduflex Class A module with independent Auxiliary Power Supply

The Moduflex IO-Link Class A module can handle a Moduflex Valve bank having up to 19 pilot
solenoid valves.
Thanks to its 2 x M12 A codded male connectors, it can be connected to any IO-Link Class A masters
and separately receive its auxiliary power supply for valves from an independent source.
The Moduflex IO-Link Class A module exists in 3 versions with the Auxiliary Power M12 connector
pin out adapted to any sourcing through a standard M12 cable:
• P2M2HBVL12400A13 version: 24 Vdc / 0 Vdc on pins 1 & 3 – Standard version
• P2M2HBVL12400A43 version: 24 Vdc / 0 Vdc on pins 4 & 3 – Compatible with Siemens wiring
• P2M2HBVL12400A42 version: 24 Vdc / 0 Vdc on pins 4 & 2 – Compatible with Rockwell wiring

Moduflex Class B module

The Moduflex IO-Link Class B module can handle a Moduflex Valve bank having up to 19 pilot
solenoid valves.
Thanks to its single M12 A codded male connectors, it can be connected to any IO-Link Class B
masters receiving its auxiliary power supply for valves on pins 2 & 5 from the only cable simplifying the
connection.

Diagnostic

The Moduflex IO-Link module offers a local diagnostic through 4 LED’s located on the visible top
side, showing:
• IO-Link com status
• Module error
• Output error
• Auxiliary power
Additionnal useful diagnostic information can be read by the PLC through the network simplifying
diagnostic and allowing predictive maintenance (all details in the user manual)

Auxiliary power from SAFE source

The Moduflex IO-Link module is compatible with SAFE power

source for valve control.

For more details, refer to page 44

Parker Hannifin Corporation

Pneumatic Division - Europe
20
PDE2536TCUK
Moduflex Valve System - P2M V series

V series valve island: Electrical fieldbus head module for IO-Link

Electrical Module for 19 outputs (Moduflex Pilot Valves)

(The last 5 outputs of this 24 DO module can't be used with Moduflex Valve)

M12 A codded Connector connection

Description IO-Link Class IO-Link 24V Aux. Power Aux. Power Weight (g) Order code
Pinout
Moduflex IO-Link Class A 3 Pin's 3 Pin's 1&3 160 P2M2HBVL12400A13
Communication
Module 3 Pin's 3 Pin's 4&3 160 P2M2HBVL12400A43

3 Pin's 5 Pin's 4&2 160 P2M2HBVL12400A42

Class B 5 Pin's 2&5 140 P2M2HBVL12400B25

IODD file can be downloaded from IODD Finder or the Moduflex web site:
https://ioddfinder.io-link.com
www.parker.com/pde/io-link

Accessories

Description Connector type Weight (g) Order code

M12 Female Connector for both IO-Link M12 - A coding 25 P8CS1205AA

communication and auxilliary power supply
P8CS1205AA

Parker Hannifin Corporation

Pneumatic Division - Europe
21
PDE2536TCUK
Moduflex Valve System - P2M T series

Individual connection valve islands: T series

In a T series valve island, electrical controls are individually
connected to each valve module, onto its solenoid pilot.

As an alternative, air pilot valve modules are also available,

to be controlled by individual pneumatic signals.

Valve island assembly Valve island configuration

As shown by the above illustration, the valve The following page presents all valve sizes pneumatic head and tail module set and
modules are one by one screwed onto each other, and functions that may enter into a T series sometimes an intermediate module set
starting from the head module. For this task, the valve island and, for each valve size, a choice including 4 configuration plates for different
single integrated screw is tightened with a torx T8 of clip-on pneumatic connectors: tubing size, functions. Valve modules may either be
standard screwdriver. straight, elbow etc." solenoid versions or air pilot versions. Mixing
The pneumatic connectors may be clipped or To receive its pressure supply and collect both versions into the same valve island is
unclipped at any stage. its exhaust, the island also requires a possible.
With a LED, a manual override and a labelling for
each valve pilot (see above illustration), the island front
face eases the "man / machine" dialogue.
The resulting valve island length is expressed by Head Tail
module plate
the drawing below, while further size details and Valve island
mountings are presented on dimensions pages. assembly

Valve pilot connections

1 - Solenoid valve modules

LED
Labelling Torx T8 screw driver
M8 lockable Island mounting
Manual (order code : P2M1K0TASD)
connector and marking for override
Clip IP67
easy
connector man / machine
IP40
dialog
In its IP40 version, each solenoid shows Clip 3 mm dia.
connection integrating LED and voltage surge
maxi.
protection. The clip connector with flying leads
may be ordered separately with independent or Island assembly with
interconnected common. a single screw per module
In its IP67 version, each solenoid shows a M8
connection. Lockable connectors, IP67 protected,
with LED voltage surge protection and flying lead
cable may be ordered for the required length. Modules and island ordering
Choice between 3 approaches: 2 - Complete modules ordering:
2 - Air pilot valve modules 1 - Basic modules ordering: Page 27 shows the ordering chart for
The following page shows these modules modules supplied with their connectors.
supplied without connector, together with 3 - Assembled island ordering:
the choice of clip-on connectors separately Page 30 shows the valve island configurator
4 mm supplied (10 units packs). This approach CD-Rom to specify a valve island that may be
OD tube gives the maximum flexibility. delivered assembled.

No connector has to be ordered: each pneumatic

pilot port includes its integrated movable elbow 4 Pneumatic head Valve module Valve module Intermediate Tail
module: size 1: size 2: module: plate:
mm OD tube push-in connector.
.width: 32 mm .width: 25 mm . width: 37.5 mm . .
width: 25 mm width: 16 mm

Typical T series short Typical T series

island for single or double hight flow
acting small cylinders. island for
both small
and large
cylinders.

Typical T series islands combining different valve flows and functions

Parker Hannifin Corporation

Pneumatic Division - Europe
22
PDE2536TCUK
Moduflex Valve System - P2M T series

Basic modules (without connector)

Valve Modules Size 1 Size 2

Symbol Description Actuator Pilot connector W (g) Order code W (g) Order code
Size 1

Dual 4/2 4/2 Spring return Solenoid M8 Lockable 68 P2M1T4ES2C 74 P2M2T4ES2C
Clip 68 P2M1T4ES2CW 74 P2M2T4ES2CW
Air pilot 63 P2M1T4PS 69 P2M2T4PS
4/2 Double pilot Solenoid M8 Lockable 77 P2M1T4EE2C 83 P2M2T4EE2C
Clip 77 P2M1T4EE2CW 83 P2M2T4EE2CW
Air pilot 67 P2M1T4PP 73 P2M2T4PP
2 x 3/2 NC + NC Solenoid M8 Lockable 80 P2M1TDEE2C 94 P2M2TDEE2C

Size 1 with exhaust check valves Clip 80 P2M1TDEE2CW 94 P2M2TDEE2CW
Air pilot 70 P2M1TDPP 84 P2M2TDPP
2 x 3/2 NO + NO Solenoid M8 Lockable 80 P2M1TCEE2C 94 P2M2TCEE2C
with exhaust check valves Clip 80 P2M1TCEE2CW 94 P2M2TCEE2CW
Air pilot 70 P2M1TCPP 84 P2M2TCPP
2 x 3/2 NC + NO Solenoid M8 Lockable 80 P2M1TEEE2C 94 P2M2TEEE2C
with exhaust check valves Clip 80 P2M1TEEE2CW 94 P2M2TEEE2CW
Air pilot 70 P2M1TEPP 84 P2M2TEPP
2 x 4/2 Spring return Solenoid M8 Lockable 88 P2M1TJEE2C

Size 2 with exhaust check valves Clip 88 P2M1TJEE2CW
Air pilot 78 P2M1TJPP
3/2 NC Solenoid M8 Lockable 76 P2M1T3ES2C 90 P2M2T3ES2C
with exhaust check valves Clip 76 P2M1T3ES2CW 90 P2M2T3ES2CW
Air pilot 71 P2M1T3PS 70 P2M2T3PS
4/3 Centre exhaust Solenoid M8 Lockable 80 P2M1TGEE2C 94 P2M2TGEE2C
2 x 3/2 NC + NC Clip 80 P2M1TGEE2CW 94 P2M2TGEE2CW
without exhaust check valves Air pilot 70 P2M1TGPP 84 P2M2TGPP

Island head and intermediate module sets

Valve Modules Size 2
Description W (g) Order code

Valve island pneumatic 64 P2M2HXT01

head and tail module set
Valve island intermediate 64 P2M2BXT0A

P2M2HXT01 supply module with a set
P2M2BXT0A of 4 configuration plates

Clip-On pneumatic connectors *

Valve Modules Size 1 Size 2

Description Tube OD W (g) Order code W (g) Order code

Straight connector G1/8" 2 FMDG1-1
4 mm 2 FMD04-1
6 mm 3 FMD06-1 3 FMD06-2
8 mm 4 FMD08-2
10 mm 5 FMD10-2
12 mm 6 FMD12-2
Elbow connector G1/8" 3 CMDG1-1
4 mm 3 CMD04-1
6 mm 5 CMD06-1 5 CMD06-2
8 mm 6 CMD08-2
10 mm 7 CMD10-2
12 mm 8 CMD12-2
Fittings and plugs pack
* Silencer 5 MMDVA2
Plug
quantity: 10 3 PMDXX1 5 PMDXX2

Electrical connectors
M8 lockable Description Connector type Cable length W (g) Order code
connector
Individual lockable connector – IP67 M8 / 2 x Flying leads 2 meters 62 P8LS08L226C
Clip connector Including LED and surge protection 5 meters 155 P8LS08L526C
2 Flying leads 9 meters 180 P8LS08L926C
Clip connector – IP40 1 x Clip connector 1 meter 8 P8LW021C
Individual: Including 2 flying leads 2 meter 12 P8LW022C
Multiple: Including 1 common (0 Vdc) 2 x Clip connectors 1 meter 12 P8LW021C02
and 1 flying lead per connector 4 x Clip connectors 1 meter 20 P8LW021C04
8 x Clip connectors 1 meter 36 P8LW021C08
Straight cable quick connect to thread M8 12 P8CS0803J
connector, IP67 protected M12 15 P8CS1204J

Parker Hannifin Corporation

Pneumatic Division - Europe
23
PDE2536TCUK
Moduflex Valve System - P2M S series

Stand-Alone Valve Modules: S series

Very useful to control isolated cylinders, these stand-alone valves module

are compact and easy to mount on the machines with neat electrical and
pneumatic connections.

As an alternative to electrical controls, valves with air pilots are also available,
to be controlled by individual pneumatic signals.

Valve functions Valve mounting Valve pilot connections

The following page shows all valve sizes and All valves may be mounted either with side 1- Solenoid valve modules
functions and, for each valve size, a choice of clip- screws or with their integrated retractable
on pneumatic connectors: tubing size, straight, brackets. Clip
elbow etc." connector
IP40

Side screw mounting

M8
lockable
connector
IP67

Valve main connections

In its IP40 version, each solenoid shows Clip
- Outlets to cylinders (ports 2 and 4) on one The brackets are connection integrating LED and voltage surge
side. then retracted. protection. The clip connector with flying
- Supply P (port 1) and exhaust E (port 3) on leads may be ordered separately with
the other side. At port 3, exhaust may be independent or interconnected common.
collected or receive a clip-on muffler. Optional foot mounting In its IP67 version, each solenoid shows a
M8 connection. Lockable connectors, IP67
protected, with LED voltage surge protection
and flying lead cable may be ordered for the
required length.

The brackets are 2- Air pilot valve modules

then extended.
No connector has to be
ordered : each pneumatic
pilot port includes its
integrated movable elbow
4 mm OD tube push-in
connector.
4 mm OD tube

Modules and island ordering

Choice between 2 approaches:
1 - Basic modules ordering: 2 - Complete modules ordering:
The following page shows these modules Page 28 shows the ordering chart for
supplied without connector, together with modules supplied with their pneumatic
the choice of clip-on connectors separately and electrical connectors and muffler.
supplied (10 units packs). This approach
gives the maximum flexibility.

Valve module Valve module

size 1 size 2

Parker Hannifin Corporation

Pneumatic Division - Europe
24
PDE2536TCUK
Moduflex Valve System - P2M S series

Basic modules (without connector)

Valve Modules Size 1 Size 2
Symbol Description Actuator Pilot connector W (g) Order code W (g) Order code
Size 1

4/2 Spring return Solenoid M8 Lockable 72 P2M1S4ES2C 78 P2M2S4ES2C

Clip 72 P2M1S4ES2CW 78 P2M2S4ES2CW
Air pilot 67 P2M1S4PS 73 P2M2S4PS
4/2 Double pilot Solenoid M8 Lockable 87 P2M1S4EE2C 93 P2M2S4EE2C
Clip 87 P2M1S4EE2CW 93 P2M2S4EE2CW
Air pilot 77 P2M1S4PP 73 P2M2S4PP
2 x 3/2 NC + NC Solenoid M8 Lockable 85 P2M1SDEE2C 91 P2M2SDEE2C
with exhaust check valves Clip 85 P2M1SDEE2CW 91 P2M2SDEE2CW
Air pilot 75 P2M1SDPP 81 P2M2SDPP
2 x 3/2 NO + NO Solenoid M8 Lockable 85 P2M1SCEE2C 91 P2M2SCEE2C
with exhaust check valves Clip 85 P2M1SCEE2CW 91 P2M2SCEE2CW
Air pilot 75 P2M1SCPP 81 P2M2SCPP
Size 2
2 x 3/2 NC + NO Solenoid M8 Lockable 85 P2M1SEEE2C 91 P2M2SEEE2C
with exhaust check valves Clip 85 P2M1SEEE2CW 91 P2M2SEEE2CW
Air pilot 75 P2M1SEPP 81 P2M2SEPP
3/2 NC Solenoid M8 Lockable 80 P2M1S3ES2C 86 P2M2S3ES2C
with exhaust check valves Clip 80 P2M1S3ES2CW 86 P2M2S3ES2CW

Air pilot 70 P2M1S3PS 76 P2M2S3PS

4/3 Centre exhaust Solenoid M8 Lockable 85 P2M1SGEE2C 91 P2M2SGEE2C

2 x 3/2 NC + NC Clip 85 P2M1SGEE2CW 91 P2M2SGEE2CW

without exhaust check valves Air pilot 75 P2M1SGPP 81 P2M2SGPP

Clip-On pneumatic connectors *

Valve Modules Size 1 Size 2
Description Tube OD W (g) Order code W (g) Order code

Straight connector G1/8" 2 FMDG1-1

4 mm 2 FMD04-1
6 mm 3 FMD06-1 3 FMD06-2
8 mm 4 FMD08-2
10 mm 5 FMD10-2
12 mm 6 FMD12-2
Elbow connector G1/8" 3 CMDG1-1
4 mm 3 CMD04-1
6 mm 5 CMD06-1 5 CMD06-2
8 mm 6 CMD08-2
10 mm 7 CMD10-2
12 mm 8 CMD12-2
Silencer 3 MMDVA1 5 MMDVA2
Plug 3 PMDXX1 5 PMDXX2
* Fittings and plugs pack quantity: 10

Electrical connectors
M8 lockable Description Connector type Cable length W (g) Order code
connector
Individual lockable connector – IP67 M8 / 2 x Flying leads 2 meters 62 P8LS08L226C
Clip connector Including LED and surge protection 5 meters 155 P8LS08L526C
2 Flying leads 9 meters 180 P8LS08L926C
Clip connector – IP40 1 x Clip connector 1 meter 8 P8LW021C
Individual: Including 2 flying leads 2 meter 12 P8LW022C
Multiple: Including 1 common (0 Vdc) 2 x Clip connectors 1 meter 12 P8LW021C02
and 1 flying lead per connector 4 x Clip connectors 1 meter 20 P8LW021C04
8 x Clip connectors 1 meter 36 P8LW021C08
Straight cable quick connect to thread M8 12 P8CS0803J
connector, IP67 protected M12 15 P8CS1204J

Parker Hannifin Corporation

Pneumatic Division - Europe
25
PDE2536TCUK
Moduflex Valve System - P2M P series

Peripheral Valve Modules: P series

Four additional peripheral modules complete the valve system
in order to facilitate the installation of specific cylinder controls:
- Dual flow control, for cylinder speed adjusting;
- Dual pilot operated check valve, for cylinder positioning;
- Pressure regulator, for cylinder thrust adjusting;
- Vacuum generator, for vacuum pad controls.

Module function selection

Dual flow control
By controlling the exhaust flows of a double acting cylinder, this module
can adjust both speeds: forwards and backwards.

Dual pilot operated check valve

Combined with a double 3/2 NC + NC valve, this module will block flows
and stop cylinder movement as soon as the valve outputs are both
exhausted. Better than a 3 position closed centre valve, it provides
accurate positioning when mounted close to the cylinder.

Pressure regulator
The thrust developed by a cylinder often requires adjustment by controlling Pressure regulator may be equiped
the pressure to the front or back of the piston. This pressure regulator with a pressure gauge or without, thus
ready for a
module enables manual adjustment of pressure on one side of the piston,
clip-on
with visual indication provided by the pressure gauge. connection
to a remote
clip-on gauge
gauge

Vacuum generator
Vacuum Vacuum Blow-off
This multi-purpose module controls vacuum pads with a choice between
two basics schematics:
- Controlled with only one 3/2 NC valve, the vacuum generator Control valves
provides vacuum to the pads during valve actuation and then
blow-off supplied from an integrated chamber.
- Controlled with a double 3/2 NC + NC, the vacuum generator
provides vacuum during the first valve actuation, and then strong
blow-off from the second valve.
Integrated blow-off flow controller. Optional plug-in vacuum sensor.
Vacuum pads

Module installation selection

Valve Double Stand-alone valve complete
module male with a plug-in peripheral module
union

Peripheral
module

To
cylinder
Plug-in
Peripheral modules may either be mounted: peripheral Plug-in
- Plugged into the valve module through double male unions; module peripheral In -line
size 1 module
- Or in line, close to the cylinder to control it better. peripheral
size 2 module
size 1
Exception:
Peripheral module
Valve A peripheral module cannot be plugged onto
close to cylinder
module a double 4/2 valve module. In -line
With this type of valve, use in-line installation peripheral
To module
only.
cylinder size 2

Parker Hannifin Corporation

Pneumatic Division - Europe
26
PDE2536TCUK
Moduflex Valve System - P2M P series

Basic peripheral modules (without connector)

Peripheral Modules Size 1 Size 2
Symbol Description Weight (g) Order code Weight (g) Order code

Dual flow control 50 P2M1PXFA 50 P2M2PXFA

Dual P.O. check valve 50 P2M1PXCA 50 P2M2PXCA

Pressure regulator Pressure range Gauge

0 - 2 bar 0 - 4 bar 135 P2M1PXSR 135 P2M2PXSR
Without 105 P2M1PXST 165 P2M2PXST
0 - 4 bar 0 - 7 bar 135 P2M1PXSM 135 P2M2PXSM
Without 105 P2M1PXSL 165 P2M2PXSL

0 - 8 bar 0 - 11 bar 135 P2M1PXSG 135 P2M2PXSG

Without 105 P2M1PXSN 165 P2M2PXSN

90% Vacuum generator 30 P2M1PXVA

Clip-On pneumatic connectors *

Valve Modules Size 1 Size 2
Description Tube OD Weight (g) Order code Weight (g) Order code

Straight connector G1/8" 2 FMDG1-1

4 mm 2 FMD04-1
6 mm 3 FMD06-1 3 FMD06-2
8 mm 4 FMD08-2
10 mm 5 FMD10-2
12 mm 6 FMD12-2
Elbow connector G1/8" 3 CMDG1-1
4 mm 3 CMD04-1
6 mm 5 CMD06-1 5 CMD06-2
8 mm 6 CMD08-2
10 mm 7 CMD10-2
12 mm 8 CMD12-2
Double male union 5 HMDXX1 8 HMDXX2
Silencer 3 MMDVA1
Plug 3 PMDXX1 5 PMDXX2
* Fittings and plugs pack quantity: 10

Clip-on accessories
Description Connection Pressure range Weight (g) Order code

Clip-on pressure gauge Clip-on 0 to 4 bar 30 P2M1K0GT

for pressure regulator modules, 0 to 7 bar 30 P2M1K0GL
size 1 or size 2 0 to 11 bar 30 P2M1K0GN

Analog (1 - 5 Vdc) Vacuum Sensor Diam. 4 mm tube 0 to -1 bar 25 MPS-V8T4-AG

Flying lead 2 meter cable Diam. 6 mm tube 0 to -1 bar 25 MPS-V8T-AG

Dig. PNP / Ana (4 - 20 mA) Vacuum Sensor G 1/8" male 0 to -1 bar 45 MPS-V34G-PCI
15 cm cable - M8 4 pin's connector

Parker Hannifin Corporation

Pneumatic Division - Europe
27
PDE2536TCUK
Moduflex Valve System - P2M Moduflex Valve complete module ordering

Electrical
Complete module ordering, as compared to basic module ordering clip-on
connectors

Complete modules Basic modules

Ordered from the following pages, the Ordered from the previous pages, the basic
complete modules are supplied all equipped modules are to be equipped with their connectors.
with their electrical and pneumatic connectors. The clip-on assembly to the module is easy.
Only one order line is necessary, and each The main advantage is flexibility : connector
module comes complete, with just the type and size may be chosen at the last
necessary chosen connectors. moment, to better fit the machine needs.
Pneumatic clip-on
push-in connectors

V series
See opposite page for complete module order code chart

Multi-connectors or fields bus electrical head modules Size 1 Size 1 Size 1 Size 2
to be ordered from pages 18 and 19 2x4/2 4/2 solenoid spring 4/2 double solenoid 4/2 double solenoid
P2M1VJEE2CV00F4 P2M1V4ES2CV00C6 P2M1V4EE2CV00F6 P2M2V4EE2CV00F0

Intermediate supply module

P2M2BXV0AC0C2
Head and tail set
P2M2HT01C8C2
T series
See opposite page for complete module order code chart

Size 1 Size 1 Size 2 Size 1 Size 1 Size 2

4/2 solenoid spring 2x3/2 NC + NC 4/2 double solenoid 4/2 double solenoid 2x4/2 4/3 All Ports Blocked
P2M1T4ES2CV90F6 P2M1TDEE2CV20C6 P2M1T4EE2CV20C0 P2M1T4EE2CV50F6 P2M1TJEE2CV21F4 P2M2TBEE2CV50F0

Head and tail set Intermediate supply module

P2M2XT01F8C0 P2M2BXT0AC8C0
Head and tail set
P2M2HT01C8C2

Special case : the 2 x 4/2 mini-module plug configuration

P2M1VJEE2CV00F4 P2M1TJEE2CV21F4
For micro-cylinders, this very compact 2 x 4/2 module (order code.
JEE) may also be used to obtain 3/2 valves, either Normally Closed or 2x4/2 No plug 2x4/2 1 plug
Normally Open.
To do so, the complete module may be supplied with plugs that may The module will be The module will be
replace some of the plug-in connectors. used as a 2x4/2 used as a 4/2 +3/2
To order, use the top chart from opposite page. valve valve

S and P series
See page 28 and 29 for complete module order code charts.

Parker Hannifin Corporation

Pneumatic Division - Europe
28
PDE2536TCUK
Moduflex Valve System - P2M Moduflex V and T series complete module order codes

Complete Moduflex modules, equipped with their electrical and pneumatic connectors, may be ordered.
To do so, use the below chart to define the complete module order codes.

Valve modules
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Minimum ordering
P 2M1 V 4 E E 2 C V 0 0 F 6 quantity: 10 pieces

Voltage
00 Pneumatic pilot
2C 24VDC

Pilot Connection & Cable Length

Valvetronic V Series IP65
V 0 V Series - Integrated Valvetronic Gallery
T Series - M8 Connector
Size Series Pneumatic connectors
0 0 No cable (also for pneumatic remote pilot)
1 Size 1 V Integrated Ports 2 & 4
V 2 2 meter cable - M8 connector
connections V 5 5 meter cable - M8 connector
2 Size 2 Size 1 modules
V 9 10 meter cable - M8 connector
T Individual F4 Straight 4 mm OD
T Series - Clip Connector
connectors
W 0 No cable C4 Elbow 4 mm OD
W 1 1 meter cable - Clip connector F6 Straight 6 mm OD
W 2 2 meter cable - Clip connector
T Series - Pneumatic Remote Pilot C6 Elbow 6 mm OD
0 0 4 mm OD tubing Size 2 modules

Valve Function - Solenoid Versions * F6 Straight 6 mm OD

4 E S 4/2 Solenoid spring C6 Elbow 6 mm OD
Plug configurations
4 E E 4/2 Double solenoid F8 Straight 8 mm OD
D E E 2 x 3/2NC + NC (with exhaust check valve) 0 No plug
C8 Elbow 8 mm OD
C E E 2 x 3/2 NO + NO (with exhaust check valve)
E E E 2 x 3/2 NC + NO (with exhaust check valve) F0 Straight 10 mm OD
Only for JEE 2x4/2 modules (1)
3 E S 3/2 NC (with exhaust check valve) C0 Elbow 10 mm OD
0 0 plug ( 2x 4/2)
G E E 4/3 centre exhaust (= 2x3/2 without exhaust check valve)
B E E 2x3/2 + clipped dual PO check (= 4/3 APB) 1 1 plug (4/2 + 3/2)
2 2 plugs (2x3/2 or 1x4/2)
Size
1 J E E 2x4/2 with exhaust check valve 3 3 plugs (1x3/2)
only with plug configuration

* For T Series - Pneumatic Pilot: Replace "ES" or "EE" by "PS" or "PP"

Head/Tail & Intermediate Modules

1 2 3 4 5 6 7 8 9 10 11 12 13
Minimum ordering
quantity: 10 pieces P 2M2 HX T 0 1 F 0 C 2

Head and intermediate module Pressure port Exhaust port

V and T series connector connector
HXT01
Pneumatic head F6 Straight 6 mm OD F6 Straight 6 mm OD
and tail set
C6 Elbow 6 mm OD C6 Elbow 6 mm OD
F8 Straight 8 mm OD F8 Straight 8 mm OD
V series intermediate C8 Elbow 8 mm OD C8 Elbow 8 mm OD
BXV0A supply module F0 Straight 10 mm OD F0 Straight 1
0 mm OD
with a set of 4 configuration plates
C0 Elbow 10 mm OD C0 Elbow 1 0 mm OD
F2 Straight 12 mm OD F2 Straight 12 mm OD
T series intermediate C2 Elbow 12 mm OD C2 Elbow 12 mm OD
BXT0A supply module
PP Plug PP Plug
with a set of 4 configuration plates
MM Muffler MM Muffler

Parker Hannifin Corporation

Pneumatic Division - Europe
29
PDE2536TCUK
Moduflex Valve System - P2M Moduflex S series complete module order codes

Complete Moduflex stand alone valves, equipped with their electrical and pneumatic connectors, may be ordered.
To do so, use the below chart to define the complete module order codes.
Stand alone valve modules
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Minimum ordering
P 2M1 S 4 E E 2 C V 5 A F 6 quantity: 10 pieces

Voltage
00 Pneumatic pilot
2C 24VDC

Pilot Connection & Cable Length

M8 Connector
0 0 No cable
Size Series V 2 2 meter cable - M8 connector
1 Size 1 S Stand alone V 5 5 meter cable - M8 connector
valve modules V 9 10 meter cable - M8 connector
2 Size 2 Clip Connector
W 0 No cable
W 1 1 meter cable - Clip connector
W 2 2 meter cable - Clip connector
Pneumatic Remote Pilot
0 0 4 mm OD tubing

Valve Function - Solenoid Versions * Pneumatic connectors

4 E S 4/2 Solenoid spring
Ports 1 & 3 Outlet ports 2 & 4 Tube OD
4 E E 4/2 Double solenoid
D E E 2 x 3/2NC + NC (with exhaust check valve) A Straight & straight F Straight & straight Size 1 modules
C E E 2 x 3/2 NO + NO (with exhaust check valve)
B Elbow & elbow C
Elbow & elbow 4 4 mm OD
E E E 2 x 3/2 NC + NO (with exhaust check valve)
3 E S 3/2 NC (with exhaust check valve) C Straight & muffler 0
No connector 6 6 mm OD
G E E 4/3 centre exhaust (= 2x3/2 without exhaust check valve) D Elbow & muffler
for plug-in P module
Size 2 modules
B E E 2x3/2 + clipped dual PO check (= 4/3 APB)
6 6 mm OD
* Pneumatic Pilot: Replace "ES" or "EE" by "PS" or "PP"
8 8 mm OD

0 10 mm OD

Size 1 Size 1
4/2 solenoid spring 2x3/2 NC + NC
P2M1S4ES2CV5CC6 P2M1SDEE2CV2BC6

Outlets
2
E
3
4
1 P

Size 2 Size 2 Size 2

4/2 double solenoid 2x3/2 NC + NC 4/3 All Ports Blocked
P2M2S4EE2CV9CC8 P2M2SDEE2CV2CC0 P2M2SBEE2CV2AF0

Parker Hannifin Corporation

Pneumatic Division - Europe
30
PDE2536TCUK
Moduflex Valve System - P2M Moduflex P series complete module order codes

Complete Moduflex peripheral module, equipped with their pneumatic connectors, may be ordered.
To do so, use the below chart to define the complete module order codes.
Dual flow control, dual pilot operated check valve, and pressure regulator peripheral modules
1 2 3 4 5 6 7 8 9 10 11 12
Minimum ordering
quantity: 10 pieces
P 2M1 P X F A J J F 6

Inlet port Outlet port

pneumatic connectors pneumatic connectors

Size 1 modules Size 1 modules

Size
F4 Straight 4 mm OD F4 Straight 4 mm OD
1 Size 1
2 Size 2 C4 Elbow 4 mm OD C4 Elbow 4 mm OD
F6 Straight 6 mm OD F6 Straight 6 mm OD
C6 Elbow 6 mm OD C6 Elbow 6 mm OD

Peripheral module function Size 2 modules Size 2 modules

F A Dual flow control F6 Straight 6 mm OD F6 Straight 6 mm OD
C A Dual P.O. check valve C6 Elbow 6 mm OD C6 Elbow 6 mm OD
Pressure regulators F8 Straight 8 mm OD F8 Straight 8 mm OD
S R 0-2 bar, with pressure gauge C8 Elbow 8 mm OD C8 Elbow 8 mm OD
S M 0-4 bar, with pressure gauge F0 Straight 10 mm OD F0 Straight 10 mm OD
S G 0-8 bar, with pressure gauge C0 Elbow 10 mm OD C0 Elbow 10 mm OD

Vacuum generator peripheral module

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

P 2 M 1 P X V A F 6 A F 6 CMA
Minimum ordering
quantity: 10 pieces

Exhaust port (3) *

F4 Straight 4 mm OD
Size Peripheral module function C4 Elbow 4 mm OD
1 Size 1 V A Vacuum generator F6 Straight 6 mm OD
C6 Elbow 6 mm OD
MA Clip-on muffler

Pressure & Blow-off port connectors Vacuum and Vacuum Sensor port connectors
F4 Straight 4 mm OD A 2 similar connectors
JJ Clip-on double male union A 2 clip-on male union
C4 Elbow 4 mm OD 1 connector on vacuum port
F4 Straight 4 mm OD B
1 plug on vacuum sensor port
C4 Elbow 4 mm OD A 2 push-in connectors F6 Straight 6 mm OD
1 Connector on Vacuum Port
F6 Straight 6 mm OD C6 Elbow 6 mm OD D
1 push-in connector 1 Dig/Ana Vacuum Sensor MPS-V34G-PCI
C6 Elbow 6 mm OD
B F1 Straight threaded 1/8"
F1 Straight threaded 1/8" 1 plug on blow-off port 1 Connector on Vacuum Port
C1 Elbow threaded 1/8" E
C1 Elbow threaded 1/8" 1 Analog Vacuum Sensor MPS-V8T-AG

Parker Hannifin Corporation

Pneumatic Division - Europe
31
PDE2536TCUK
Moduflex Valve System - P2M

Island head module port sizing

Moduflex is totally flexible: islands may have up to 19 valves for the V Series and is not limited for the T series with a
choice of 3 valve sizes, depending on the required flow. Thus, each island has specific needs for the size of it pressure
supply and its exhaust collection.

Choice of connections to an island P and E ports

choice of straight clip-on connectors:

6, 8, 10 or 12 mm OD

pressure
plug
supply

exhaust
collection

head module intermediate head or

supply module intermediate c l i p - o n m u ff l e r
supply
module

Valve island pressure supply and exhaust collection are connected

onto the head module and, if flows require it, onto intermediate swivel
elbow
supply modules added into the island.
For this purpose, the choice of clip-on connectors is very open:
from 6 to 12 mm OD tubing connectors, either straight or elbows. choice of elbow clip-on connectors:
A clip-on muffler and a clip-on plug complete this offer. 6, 8, 10 or 12 mm OD

Sizing recommendations

size 1 size 2 size 1 size 2 size1

6 mm OD 10 mm OD 6 mm OD 10 mm OD 6 mm OD
P 6 mm OD P 10 mm OD P 12 mm OD
E 8 mm OD E 12 mm OD E 12 mm OD x 2

The 3 valve islands above present typical situations for sizing islands We would recommend the following:
pressure supply and exhaust collection.
- air supply connection at least equivalent to largest output tube
In a given island, valves do not deliver their flow at the same to cylinders;
moment. Thus, the number of valves in an island is not the major - exhaust collection at least twice the section area of the largest
factor to consider. More important is the size of the largest valve output tube to cylinders.
and of the largest output tubes to the cylinders.
For islands with high flows, the following options are possible:
- use tubes up to 12 mm OD or mufflers providing exhaust
ID section areas of standard tubings collection is not necessary;

2 x 4 mm: 3 mm² 5.5 x 8 mm: 24 mm² 10 x12 mm: 80 mm² - provide additional P and/or E connection ports by inclusion
2.7 x 4 mm: 6 mm² 6 x 8 mm: 28 mm² of intermediate supply modules, thus keeping tube size small.
4 x 6 mm: 12 mm² 7 x 10 mm: 40 mm² muffler: 100 mm²
At the machine commissioning stage, the supply and exhaust
8 x 10 mm: 50 mm² equivalent
connections can be easily modified until the required performance
is achieved.

Parker Hannifin Corporation

Pneumatic Division - Europe
32
PDE2536TCUK
Moduflex Valve System - P2M Moduflex V, T and S series

Maintenance procedure

The latest generations of compact pneumatic valves have a when necessary the solenoid pilot, valve or connector can be
life expectancy which generally exceeds the equipment they easily replaced without removing the island base, as shown
control. Therefore, although maintenance is seldom required, below.

S and T
series

Please, use a
Torx T8 screw
driver. Also
possible to
use a 3.5 mm
screwdriver.

V series

With only one universal solenoid pilot Multi-function adaptable manual override
for all configurations, maintenance is
simple
24V DC is now a global standard for all machines.

The Moduflex 24V DC unique solenoid pilot is supplied with

the multi-function manual override that can be adapted to all
requirements, as explained by the drawings.

Because all Moduflex valve and island configurations are 1 - push - 2 - push -
supplied with this unique solenoid pilot, maintenance release twist -
operations remain very simple. lock

isolation
fork

locking
P2M2K0FA
stop

3 - remove lock 4 - manual

capability override is
totally isolated

Parker Hannifin Corporation

Pneumatic Division - Europe
33
PDE2536TCUK
Moduflex Valve System - P2M Moduflex V, T and S series

Maintenance components

Valve pilot Connection Weight (g) Order code

P2D8V32C5 Solenoid pilot M8 - 3 Pins - IP67 15 P2D8V32C5

Clip connector - 2 pins - IP40 15 P2D2W3226C5

With LED and voltage surge supression
Pneumatic pilot 4 mm OD tubing push-in elbow fitting 10 P2M2K0PA
P2M2K0PA
P2D2W3226C5
size 1 valve modules without solenoid pilot and without sub-base Weight (g) Order code

4/2 monostable 26 P2M1X4ES

bistable 25 P2M1X4EE

3/2 double NC + NC 28 P2M1XDEE

double NO + NO 28 P2M1XCEE

double NC + NO 28 P2M1XEEE
single NC 25 P2M1X3ES

P2M1X4EE
4/3 CE double 3/2 NC + NC without exhaust check valve 28 P2M1XGEE

size 2 valve modules without solenoid pilot and without sub-base Weight (g) Order code

4/2 monostable 28 P2M2X4ES

bistable 30 P2M2X4EE

3/2 double NC + NC 32 P2M2XDEE

double NO + NO 32 P2M2XCEE

double NC + NO 32 P2M2XEEE

single NC 28 P2M2X3ES

4/3 CE double 3/2 NC + NC without exhaust check valve 32 P2M2XGEE

P2M2X4EE

Set of maintenance parts Weight (g) Order code

Seals Set of various seals: 8 PM2K0JA
3 under solenoid pilot seals
3 inter island base seals
2 for dual 4/2 valves (2 parts)
2 for single and dual 3/2 – Size 1 – valves
2 for single 4/2 – Size 1 – valves
2 for size 2 valves (all functions)
Fitting locking clips Set of 14 clips: 10 P2M2K0CA
4 for dual 4/2 valves
6 for size 1 valves
2 for size 2 valves
2 for intermediate supply modules
Manual override forks Set of 10 isolating forks for 8 P2M2K0FA
pilot solenoid manual override

Parker Hannifin Corporation

Pneumatic Division - Europe
34
PDE2536TCUK
Moduflex Valve System - P2M V series - Dimensions and mounting

1 - Multi-connector or sub-D 25 valve island

Multi-connector Head and tail Modules Modules Intermediate
or sub-D 25 pneumatic module set size 1 size 2 module
electrical head module width: 48 mm width: 25 mm width: 37.5 mm width: 25 mm
width: 15 mm

Island total width

depending on valve
composition

Head Dual
Module Intermediate Module Tail
module 4/2
- - - - : sub-D 25 size 1 module size 2 plate
module

2 screws
4 mm dia.
surface
mounting

sub-D 25 or
2 mounting holes 4.3 mm dia DIN rail DIN rail 35x7 mm or 35x15 mm
mounting

2 pivoting locks for DIN rail mounting

Special case: 4/3 closed centre function within island version:

Add the dimensions of the dual P.O. check valve
module plugged into the island. See pages 39 and 40 for dimensions.

Island head and intermediate modules

Island valves modules
a b c
OD tube a b c
6 mm tube OD 8 13 16
Size 1 4 mm 8 10 12
8 mm tube OD 9 16 19
modules 6 mm 8 13 16
10 mm tube OD 13 18 22
Size 2 8 mm 9 16 19
12 mm tube OD 13 19 25
modules 10 mm 13 18 22
Muffler 40

Parker Hannifin Corporation

Pneumatic Division - Europe
35
PDE2536TCUK
Moduflex Valve System - P2M V series - Dimensions and mounting

2 - Field bus connected islands

Electrical field Head and tail Modules Modules Intermediate
bus head module pneumatic module set size 1 size 2 module
width: 62 mm width: 48 mm width: 25 mm width: 37.5 mm width: 25 mm

Island total width

depending on valve
composition

Pneumatic
Electrical field head Module Intermediate Module Tail
bus head module module size 1 module size 2 plate 2 screws
4 mm dia.
surface
mounting

or
DIN rail
mounting

AS-i bus islands

2 mounting holes 4.3 mm dia DIN rail 35x7 mm or 35x15 mm

2 pivoting locks for DIN rail mounting

Device Bus and IO-Link Valve Islands

2 mounting holes 4.3 mm dia DIN rail 35x7 mm or 35x15 mm

2 locks for DIN rail mounting

Parker Hannifin Corporation

Pneumatic Division - Europe
36
PDE2536TCUK
Moduflex Valve System - P2M T series - Dimensions and mounting

Island total width

depending on valve
composition
Pneumatic
head and Modules Modules Intermediate
tail module size 1 size 2 module
With IP67 Lockable connector With IP40 Clip connector width ⇒ 48 mm 25 mm 37.5 mm 25 mm

Pneumatic Dual
head 4/2 Module Intermediate Module Tail
module module size 1 module size 2 plate

2 screws
4 mm dia.
surface
mounting

2 mounting holes 4.3 mm dia DIN rail 35x7 mm or 35x15 mm

or
DIN rail
With Lockable connector mounting With Lockable connector

With Clip connector With Clip connector

2 pivoting locks for DIN rail mounting

Special case : 4/3 closed centre function within island version:

Add the dimensions of the dual P.O. check valve
module plugged into the island.

Island head and intermediate modules

Island valves modules
a b c
6 mm tube OD 8 13 16 OD tube a b c
8 mm tube OD 9 16 19 Size 1 4 mm 8 10 12
10 mm tube OD 13 18 22 modules 6 mm 8 13 16
12 mm tube OD 13 19 25 Size 2 8 mm 9 16 19
modules 10 mm 13 18 22
Muffler 40

Parker Hannifin Corporation

Pneumatic Division - Europe
37
PDE2536TCUK
Moduflex Valve System - P2M S series - Dimensions and mounting

Stand-alone surface mounting with screws

4 mm dia. into retractable brackets 3 mm thick
valve
size 1 Lockable connector or side mounting with
2 screws 4 mm dia. With Lockable connector
Clip connector
With Clip connector

Stand-alone
valve
size 2 Lockable connector or side mounting with
2 screws 4 mm dia. With Lockable connector
Clip connector
With Clip connector

Dimensions and mountings

of the stand-alone valves
4/2, double and single 3/2,
a b c
4/3 vented centre and
4/3 pressure centre. 4 mm tube OD 8 10 12
Size 1
6 mm tube OD 8 13 16
Special case : 4/3 closed centre. modules
Add the dual P.O. check Muffler 31
valve module that has been 8 mm tube OD 9 16 19
plugged in the basic valve. Size 2
10 mm tube OD 13 18 22
modules
Muffler 40

Parker Hannifin Corporation

Pneumatic Division - Europe
38
PDE2536TCUK
Moduflex Valve System - P2M P series - Dimensions and mounting

Reminder: peripheral modules may either be plugged in the valve output ports or mounted in line separate from the valve

peripheral module in-line peripheral modules:

plugged in a valve mounting is required
or an island

Dual flow control module size 1 possible mounting

with 2 screws
3 mm dia.

Pressure regulation module size 1 mounting with 2 screws 4 mm dia.

on retractable brackets

- with gauge

- without gauge

swivel elbow push-in

connector 4 mm OD tube
Dual P.O. check valve module size 1 possible mounting
with 2 screws
3 mm dia.

Parker Hannifin Corporation

Pneumatic Division - Europe
39
PDE2536TCUK
Moduflex Valve System - P2M P series - Dimensions and mounting

Dual flow control module size 2

possible mounting
with 2 screws
3 mm dia.

Pressure regulation module size 2

mounting with 2 screws 4 mm dia.
- with gauge on retractable brackets

- without gauge

swivel elbow push-in

connector 4 mm OD tube

possible mounting
with 2 screws
Dual P.O. check valve module size 2 3 mm dia.

Parker Hannifin Corporation

Pneumatic Division - Europe
40
PDE2536TCUK
Moduflex Valve System - P2M P series - Dimensions and mounting

Vacuum generator module

In-line
73.6

25 39.5

13.5 15.5

47
16.6

37.5
80.6
32.8 24.7

40.8

With Moduflex valve

34 68

26 15.5
12.5 7.2
20.7

32.6
26.5

15
27

34.8

140
16.6

27.5

33 4.5 24.7

41

Parker Hannifin Corporation

Pneumatic Division - Europe
41
PDE2536TCUK
Moduflex Valve System - P2M Moduflex V, T, S and P series

Recommendations for building machines with imperial OD tubes (US usual standard)

size 1 modules Moduflex is a global product available in the US with the two standards
that are commonly used in this country:
- metric OD tubes with the metric connectors shown in this catalogue,
- imperial OD tubes with specific connectors for the US.

Machine builders exporting to the US may propose

to their clients one of the following solutions.
5/32’’ or 1/4’’
OD tube - Machines equipped with Moduflex components - Or machines equipped with Moduflex
connected with metric tubes found in this components connected with imperial size OD
catalogue. Parker will provide products locally tubes. In this case, use the following procedure
for maintenance. to order Moduflex and to build the machine.
size 2 modules

Imperial OD tube and metric OD tube comparison

metric imperial metric
standard US standard equivalent Moduflex clip-on connectors
tube OD tube OD
4 mm 5/32” 4 mm imperial and metric connectors identical
5/16’’ or 3/8’’
OD tube 6 mm 1/4” 6,35 mm specific imperial connector
8 mm 5/16” 8 mm imperial and metric connectors identical
10 mm 3/8” 9,53 mm specific imperial connector
12 mm 1/2” 12,7 mm specific imperial connector
head and intermediate
island modules
Moduflex selection for imperial size OD tubes

Such components will easily be obtained with the 2 - Select from the list below the clip-on
following procedure: connectors for the required imperial OD tubes.
1/4’’, 5/16’’, 3/8’’ or 1/2’’
OD tube
1 - select the required basic modules (with no Push-in the connectors into the basic modules
connector). 3 - ports in order to obtain complete modules.

FMD04-1
FMD07-1 elbow version straight version
pneumatic connectors for size 1 modules Pack Weight Order Weight Order
Quant. (g) per unit code (g) per unit code

clip-on tube push-in connector 5/32’’= 4 mm OD 10 5 CMD04-1 2 FMD04-1

CMD04-1

1/4’’OD 10 5 CMD07-1 3 FMD07-1

CMD07-1

elbow version straight version

pneumatic connectors for size 2 modules
Pack Weight Order Weight Order
FMD07-2 head and intermediate island modules Quant. (g) per unit code (g) per unit code

FMD13-2 clip-on tube push-in connector 1/4’’OD 10 5 CMD07-2 3 FMD07-2

5/16’’= 8 mm OD 10 6 CMD08-2 4 FMD08-2

3/8’’OD 10 7 CMD09-2 5 FMD09-2

CMD13-2

1/2’’OD 10 8 CMD13-2 6 FMD13-2

Parker Hannifin Corporation

Pneumatic Division - Europe
42
PDE2536TCUK
Moduflex Valve System - P2M V series - The multi-connector and its addressing

guillotine
lock

fool proof
positioner

multi-
connector
solenoid pilot position into the island

cable The valve island head multi-connector

2m
5m On the island head module, the multi- connector Cable specification:
integrates the HE10 connector standard in its
or 9 m 8,6 mm dia., UL, 20 wires, 0.22 mm 2 ,
20 pin version. Its plug-in function is secured in
position with a guillotine lock with easy access AWG 24.
from the front of the island. Just like the whole Minimum static radius : 6.5 mm.
island, the multi-connector follows the IP65
protection standard. Available with 2 m, 5 m and 9 m lengths.

Multi-connector addressing

When assembling a V series island, modules are The colour code addressing given below
Ø 8.6 mm automatically connected to the head module conforms to the DIN 47100 standard.
through the modular principle of the integrated
electrical connections. To each wire colour code corresponds a solenoid
pilot position in the island.

solenoid pilot position into the island

colour code colour code colour code

0 pink - brown 7 white - green 14 grey

1 white - pink 8 red - blue 15 yellow
20 wires 2 grey - brown 9 grey - pink 16 green
0.22 mm 2
3 white - grey 10 violet 17 brown
AWG 24 4 yellow - brown 11 red 18 white
5 white - yellow 12 blue
6 brown - green 13 pink common: black

Sub-D 25 addressing

Pin Pin
Address Number Number Address

Not used
Not used
Not used
Not used
Not used
Common

Face View - Male D-Sub, 25-Pin Connector

Parker Hannifin Corporation

Pneumatic Division - Europe
43
PDE2536TCUK
Moduflex Valve System - P2M V series - IO-Link module connection

IO-Link module connection and diagnostic functions

IO-Link
Class B Class A

IO-Link module connection

Standard male M12 – type A

Usage of standard manufactured cables
available from your usual electrical supplier is
recommended.
Note: Auxiliary power for solenoids can be Legend
24V
wired allowing the user to turn outputs off
while the communications remains on. Symbol Description Class B Class A Class A
M12
L+ IO-Link Power Supply "+" 5 Pin's 3 Pin's 3 Pin's 5 Pin's
Pin's
L- IO-Link Power Supply "-" P2M...B.. P2M...A.. P2M...A13 P2M...A43 P2M...A42
Configuration C/Q IO-Link communication L+ L+ 1 Aux + Not used Not used
Aux + Auxilliary Power Supply 24 Vdc Aux + - 2 - - Aux -
IODD file can be downloaded from IODD Finder
Aux - Auxilliary Power Supply 0 Vdc L- L- 3 Aux - Aux - Not used
or the Moduflex web site:
C/Q C/Q 4 n.c. Aux + Aux +
https://ioddfinder.io-link.com
Aux - - 5 - - Not used
www.parker.com/pde/io-link

Case of use with SAFE power source for valve control

The Moduflex IO-Link Module can be powered

from a 24Vdc auxilliary source in PP or PM Class B Class A
mode as grounds are isolated. L+ Aux Power PP Cabling L+ Aux Power PM Cabling 24V Aux Power PP Cabling 24V Aux Power PM Cabling

+24 Vdc
1 1 1 +24 Vdc 1
For compatibility with a safe output pulsed C/Q
4 2
+24 Vdc
C/Q
4 2
+24 Vdc
N.C.
4
N.C.
4

module, please refer to user manual document L- 3

5
0 Vdc
L- 3
5
0 Vdc 3 0 Vdc 3
0 Vdc
No 30048690201W05 available on Power Switch Control Power Switch Control Power Switch Control Power Switch Control
www.parker.com/pde/io-link. Cabling for
P2M2HBVL12400A13

IO-Link module diagnostic functions

The Moduflex IO-Link module offers

additional useful module status COM.
Green LED Module Error Red LED Error Output Red LED POWER
Green LED
information: LED Description Solving LED Description Solving LED Description Solving LED Description Solving
Status Status Status Status

• Pilot overload or short circuit OFF IO-Link L+ / L-

not powered
Check
connection
OFF Standard mode NA OFF Standard mode NA OFF AUX power failure Check
Auxilliary
Power
• Auxiliary Voltage out of tolerance ON IOL L+ / L- Set IO-Link ON 24 Vdc AUX Check power ON Any driver error Fix solenoid
Supply
powered IO mode in IO- power missing supply or (overload, over issue then ON Standard NA
mode Link master or any active change temperature, acknowledge
• Cycle counter for every pilot malfunction module etc.) error
• Module temperature Blinking IO-Link NA Blinking Aux Power is out of Check
communication range, alarm level Auxilliary
active Power
For deeper information on product 10% 90%

1s
50% 50%
10% 90%

1s
50% 50% Supply

technical information and module

1s 1s

diagnostic functionalities, please refer to IO-Link Communication Module Diagnostic Outputs (valves)Diagnostic Auxiliary Power Supply
the User Manual available from the product
web page:

www.parker.com/pde/io-link

Parker Hannifin Corporation

Pneumatic Division - Europe
44
PDE2536TCUK
Moduflex Valve System - P2M V series - Device bus modules connections

Power supply common to all types of device bus modules

M12 supply
In this catalogue:
1 - Connection connector (as seen on module) M12 M12
type A type B
. V series device bus electrical All bus modules have a M12 male
1 - 24 V DC module
head modules connector for power supply.
(not connected
. V series device bus for DeviceNet
dimensions and mounting and CANopen)
. Remote short valve islands 2 - not connected
with device bus 3 - 0 V DC module
and solenoid
4 - 24 V DC solenoid
5 - protected earth (PE)

2 - Diagnostic green: power module OK green: power solenoid OK

The two «power» indicators shown

on the illustrations provide visual
indication of the module and
solenoid supply status.

Note: output power to the

solenoids can be wired to allow the M12 male
user to turn the outputs off while supply connector
allowing the communications to
remain on.
«bus in» and «bus out» connectors

Bus cable protection shield connections bus cable

shield
for Profibus DP, DeviceNet and CANopen
To provide protection against electro-magnetic interferences,
the bus cables are shielded. The module «bus in» and «bus
out» connectors each includes a pin for connecting the cable bus in bus out

shield (see next pages). It is safer to connect the shield to the

protected earth (PE) at both ends of the bus.
Within the bus module, provision is made to enable shield power supply
internal use
continuity by connection between the two shield pins.

The protected earth have to be connected localy on each

module for CE accordance. protected earth (PE)

Solenoid pilot diagnostic common to all device bus modules

Red LEDs detecting solenoid valve short-circuits A: sol. pilots 0 to 3 B: sol. pilots 4 to 7 C: sol. pilots 8 to 11 D: sol. pilots 12 to 15

green sol. pilot supply OK

Inside the bus module, solenoid valve control is protected - The solenoid pilot power supply indicator, green
against short-circuits, with the following visual indication when supply is OK.
provided: - The red LEDs detecting solenoid valve short-circuits
with code shown above.

Parker Hannifin Corporation

Pneumatic Division - Europe
45
PDE2536TCUK
Moduflex Valve System - P2M V series - Device bus modules connections

bus in bus out

(as seen on module) (as seen on module)
pin out
1:+5V
2 : line A
3:0V
Bus cable connections 4 : line B
5 : shields
Profibus DP standard male and female type B M12 M12 male M12 female
connectors. B type B type
Use of prefabricated cables available from your
usual electrical supplier is recommended.
Line termination, P8BPA00MB, is necessary on the
«bus out» connector of the last station. bus active diagnostic error
solenoid pilot diagnostic

Addressing
Use the .GSD file on Moduflex web site:
www.parker.com/pneu/moduflex
The coding wheels enable configuration
of the decimal address.

Diagnostic equipment
adress 1-99

Diagnostic according to the module dialogue

shown on the illustration.

bus in bus out

(as seen on module) (as seen on module)
pin out

1 : drains
2 : V+
Bus cable connections 3:V-
4 : CAN-H
DeviceNet standard male and female type A M12 5 : CAN-L
M12 male M12 femelle
connectors. A type
A type
The supply for the module is supplied from the
V+ and V- (24 V DC) of «bus in» connector.
Use of prefabricated cables available from your
usual electrical supplier is recommended. bus active bus communication error
Line termination, P8BPA00MA, is necessary on the solenoid pilot diagnostic
«bus out» connector of the last station.

Addressing
Use the .EDS file on Moduflex web site:
www.parker.com/pneu/moduflex
The coding wheels enable configuration
of the decimal address.

Diagnostic
Diagnostic according to the module equipment bus speed: 125 K baud, 250 K baud, 500 K baud
dialogue shown on the illustration. MAC ID 1-63

Parker Hannifin Corporation

Pneumatic Division - Europe
46
PDE2536TCUK
Moduflex Valve System - P2M V series - Device bus modules connections

bus in bus out

(as seen on module) (as seen on module)
pin out

1 : drains
2 : V+
3:V-
Bus cable connections 4 : CAN-H
CANopen standard male and female type A M12 M12 male 5 : CAN-L M12 female
connectors. A type A type
The supply for the module is supplied from the V+
and V- (24 V DC) of «bus in» connector.
Use of prefabricated cables available from your
usual electrical supplier is recommended. bus active bus communication error
Line termination, P8BPA00MA, is necessary on the solenoid pilot diagnostic
«bus out» connector of the last station.

Addressing
Use the .EDS file on Moduflex web site:
www.parker.com/pneu/moduflex
The coding wheels enable configuration
of the decimal address.

Diagnostic
bus speed: 20 K baud, 125 K baud, 250 K baud
Diagnostic according to the module dialogue equipment Other: auto-detection 10 K baud to 1 M baud
shown on the illustration. MAC ID 1-63

Bus cable connections bus in pin out bus out pin out
(as seen on module) (as seen on module)
1: D0 1: D0
The M23 connectors conform to «Interbus
remote bus». 2: D0 2: D0
3: DI 3: DI
Use of prefabricated cables available from your 4: DI 4: DI
electrical usual supplier is recommended.
5: ground 5: ground
6: NC 6: NC
Automatic Addressing 7: NC 7: NC
InterBus-S is self addressing. Thus it does not need 8: NC 8: NC
any software or hardware configuration. M23 male 9: NC M23 female 9: RBST

Manual Addressing Note: for more details please consult «Interbus remote bus» documentation

InterBus-S network can also be manually

configured using:
remote bus check bus active remote bus disabled
- ID code: 03 (hexadecimal)
- Data length: 2 bytes

Diagnostic
Diagnostic according to the module dialogue
shown on the illustration.
This diagnostic conforms to the InterBus-S
standard.

solenoid pilot diagnostic (box below)

Parker Hannifin Corporation

Pneumatic Division - Europe
47
PDE2536TCUK
Moduflex Valve System - P2M V series - AS-i bus module addressing

Bus addressing, first and second node

LED and input area for first node

In this catalogue: LED and input area for second node

. V series AS-i bus electrical

cal head modules
.V series AS-i bus AS-i yellow cable
bus signals +
dimensions and mounting bus module and
sensors supply

.Remote short valve

islands with AS-i bus
AS-i black cable
24 V DC output
*
supply (sol. pilots)

AS-i standard AS-i version 2-1

2 nodes of 4I / 3O 1st node 2rd node unscrewing the plug gives access to the jacks shown here.
2 nodes of 4I / 4O 1st node 2rd node
Recommended cable: P8LS12JACK

second node addressing Address the first node

in the first step.
Profil:
first node addressing
ID Code AS-i V2.0 AS-i V2.1
IO 7 7
* The extern supply shall have protective isolation in accordance with IEC 364-4-41 (PELV).
ID F A
ID1 F 7
ID2 F E

Bus diagnostic

<power> LED state off green red

second node Power supply sol. pilot supply normal operation solenoid overload
first node
green red green red

first node LEDs state second node LEDs state System condition
green LED red LED green LED red LED

Normal operation
6 7
No module + sensor supply

Input overload

No AS-i communication

Address first node = 0

Address second node = 0

white area for input LED
address marking D (0 1 2 3) (see examples below)
ON OFF BLINK

Input wiring

Physical input ( I, II, III, IV ) = D (0 1 2 3) first node, physical input ( V, VI, VII, VIII ) = D (0 1 2 3) second node
Examples : physical input III = logical input 6.2, physical input V = logical input 7.0
M8 female connectors M12 female connectors

pin out
1 - 24 V DC / AS-i
2 - second input
pin out 3 - 0 V DC / AS-i
1 - 24 V DC / AS-i 4 - first input
3 - 0 V DC / AS-i 5 - not connected
4 - input
Note : with only one node, the inputs
II and IV are connected to the
connections on the right.

Parker Hannifin Corporation

Pneumatic Division - Europe
48
PDE2536TCUK
Moduflex Valve System - P2M

Moduflex: a simple and complete «user system»

The illustration of the opposite page resumes the system organization with:
- the 4 module series V, T, S and P;
- the module and pneumatic connector sizes 1 and 2;
- all basic modules functions and order codes;
- all electrical and pneumatic plug-in connector order codes.

With local inventories reduced to the modules and connectors shown here, any local distributor,
machine manufacturer or user easily obtains the valve island or stand-alone that he needs and will
then completely master any evolution required by the machine commissioning.

Note : the functional poster proposed below reproduces this illustration at A1 format (60 x 84 cm).

The machine designer

Moduflex workshop

Valves are the centre of electro-pneumatic

automation. They are now designed into compact
islands that are easily configured to each
application. For full efficiency in this enhanced
automation practice, machine designers are helped
by 3 complementary design tools:

1 - the Moduflex valve island configurator, an

easy to use CD-ROM

2 - the Moduflex functional poster, a «one glance

synopsis» of the Moduflex System;

3 - this catalogue, that includes «The manual of

modular pneumatic valves islands».

Make sure your Moduflex workshop is complete.

Parker Hannifin Corporation

Pneumatic Division - Europe
49
 Moduflex Valve System
V series T series S series P series
Integrated connection field bus Individual connector valve islands Stand alone valves Peripheral modules
or multi-connector valve island Solenoid clip or lockable connector or remote air pilot Solenoid clip or lockable connector or remote air pilot Flow control, check valves, pressure regulator, vacuum

1
Electrical field bus head modules ASi Std 4O í P2M2HBVA10400
Island head and intermediate module sets Size 2
4O/4I M12 í P2M2HBVA10404B
8O í P2M2HBVA10800 V series T series
8O/8I M8 í P2M2HBVA10808A
Valve island pneumatic head and tail
8O/8I M12 í P2M2HBVA10808B
module set
P2M2HXT01 P2M2HXT01
ASi v 2.1 6O í P2M2HBVA20600
6O/8I M8 í P2M2HBVA20608A
6O/8I M12 í P2M2HBVA20608B Valve island intermediate supply module
P2M2BXV0A P2M2BXT0A
with a set of 4 configuration plates
ProfiBus DP 160 í P2M2HBVP11600
DeviceNet 160 í P2M2HBVD11600
CANopen 160 í P2M2HBVC11600
Electrical connectors
InterBus S 160 í P2M2HBVS11600
Description Connector type Cable length
IO-Link A 24DO í P2M2HBVL12400A13 M8 lockable
IO-Link A 24DO í P2M2HBVL12400A42 connector Individual lockable connector – IP67 2m P8LS08L226C
IO-Link A 24DO í P2M2HBVL12400A43 Including LED and surge protection M8 / 2 x Flying leads 5m P8LS08L526C
Electrical multi-connector head module IO-Link B 24DO í P2M2HBVL12400B25 2 Flying leads 9m P8LS08L926C
Description Protection Cable length 1 x Clip connector 1m P8LW021C
Guillotine type Multi-connection head module P2M2HEV0A Clip connector – IP40 2m P8LW022C
Individual : Including 2 flying leads
Guillotine connector 2m P8LMH20M2A Clip connector 2 x Clip connectors 1m P8LW021C02
Multiple : Including 1 common (0 Vdc)
with flying leads IP65 5m P8LMH20M5A 4 x Clip connectors 1m P8LW021C04
and 1 flying lead per connector
multi-cable 9m P8LMH20M9A 8 x Clip connector 1m P8LW021C08
Multi-connection head module P2M2HEV0D
Standard Sub-D 25 P8CS0803J Straight cable quick connect to M8 P8CS0803J
Sub-D 25 connector 3m P8LMH25M3A
type IP40 P8CSY1212A thread connector, IP67 protected M12 P8CS1204J
with flying leads 9m P8LMH25M9A
« Y » shape M12 Male - 2 x M12 Female P8CSY1212A
multi-cable IP65 9m P8LMH25B9A

2
150 400 1200 24 V P= - 0.9 bar / +8 bar
NI/mn NI/mn NI/mn

Size 1 Size 2
IP65 IP67 IP40 IP65 IP67 IP40

V T S T S V T S T S
25mm 25mm 37.5mm

P2M1V4ES2CV P2M1T4ES2C P2M1S4ES2C P2M1T4ES2CW P2M1S4ES2CW P2M2V4ES2CV P2M2T4ES2C P2M2S4ES2C P2M2T4ES2CW P2M2S4ES2CW
Size 1

4/2 P2M1V4EE2CV P2M1T4EE2C P2M1S4EE2C P2M1T4EE2CW P2M1S4EE2CW P2M2V4EE2CV P2M2T4EE2C P2M2S4EE2C P2M2T4EE2CW P2M2S4EE2CW

P2M1VJEE2CV P2M1TJEE2C P2M1SJEE2C P2M1TJEE2CW P2M1SJEE2CW

P2M1VDEE2CV P2M1TDEE2C P2M1SDEE2C P2M1TDEE2CW P2M1SDEE2CW P2M2VDEE2CV P2M2TDEE2C P2M2SDEE2C P2M2TDEE2CW P2M2SDEE2CW

P2M1VCEE2CV P2M1TCEE2C P2M1SCEE2C P2M1TCEE2CW P2M1SCEE2CW P2M2VCEE2CV P2M2TCEE2C P2M2SCEE2C P2M2TCEE2CW P2M2SCEE2CW

3/2 P2M1VEEE2CV P2M1TEEE2C P2M1SEEE2C P2M1TEEE2CW P2M1SEEE2CW P2M2VEEE2CV P2M2TEEE2C P2M2SEEE2C P2M2TEEE2CW P2M2SEEE2CW

Size 2 P2M1V3ES2CV P2M1T3ES2C P2M1S3ES2C P2M1T3ES2CW P2M1S3ES2CW P2M2V3ES2CV P2M2T3ES2C P2M2S3ES2C P2M2T3ES2CW P2M2S3ES2CW

3 Optimal nominal section for a full flow with appropriate fitting Size 2 Size 1 Size 01
Clip-On pneumatic connectors Tube OD Size 1 Size 2
Nominal section 40 mm2 Nominal section 12 mm2 Nominal section 4 mm2
Straight connector G1/8 FMDG1-1
3 valve sizes lead to a Qn 1200 NI/mn* Qn 400 NI/mn*
Qn 150 NI/mn*
4mm FMD04-1
Qmax 1340 NI/mn* Qmax 510 NI/mn*

global choice of tube * For 3/2 functions

Qn 450 NI/mn
Qmax 805 NI/mn
* For 3/2 functions
Qn 235 NI/mn
Qmax 415 NI/mn
Qmax 275 NI/mn*

6mm FMD06-1 FMD06-2

sizes, thus covering all Tube size
to cylinder
Ø Ext.
10 mm
Ø Ext.
8 mm
Ø Ext.
6 mm
Ø Ext.
4 mm
Ø Ext.
4 mm
usual applications Cylinder Ø 63 to Ø 40 to Ø 25 to Ø 6 to Ø 6 to
8mm FMD08-2
bore size Ø 100 mm Ø 63 mm Ø 40 mm Ø 25 mm Ø 25 mm
10mm FMD10-2
12mm FMD12-2
Elbow connector G1/8 CMDG1-1
4mm CMD04-1
6mm CMD06-1 CMD06-2
P 8mm CMD08-2
10mm CMD10-2
E
12mm CMD12-2

Double male union HMDXX1 HMDXX2

Adaptive pneumatic connection
Valve outputs
are equipped
with clip-on Silencer MMDVA1 MMDVA2
push-in tube
connectors with
a choice of
straight or elbow 6 mm 8 mm 10 mm 12 mm 4 mm 6 mm
Plug PMDXX1 PMDXX2
in different sizes

4
Basic peripheral modules (without connector) Size 1 Size 2 Clip-on accessories
Description Connection Pressure range
Dual flow control P2M1PXFA P2M2PXFA
0 to 4 bar P2M1K0GT
Clip-on pressure gauge for pressure
Clip-on 0 - 7 bar P2M1K0GL
regulator modules, size 1 or size 2
Dual P.O. check valve P2M1PXCA P2M2PXCA 0 - 11 bar P2M1K0GN

4 mm tube 0 to -1 bar MPS-V8T4-AG

Analog (1 - 5 Vdc) Vacuum Sensor
Pressure regulator Pressure range Gauge Flying lead 2 m cable
6 mm tube 0 to -1 bar MPS-V8T-AG
0 - 2 bar 0 - 4 bar P2M1PXSR P2M2PXSR
Without P2M1PXST P2M2PXST Dig. PNP / Ana (4 - 20 mA) Vacuum
0 - 4 bar 0 - 7 bar P2M1PXSM P2M2PXSM Sensor 15 cm cable - M8 4 pin’s G1/8” male 0 to -1 bar MPS-V34G-PCI
connector
Without P2M1PXSL P2M2PXSL
0 - 8 bar 0 - 11 bar P2M1PXSG P2M2PXSG
Without P2M1PXSN P2M2PXSN

90% Vacuum generator P2M1PXVA www.parker.com/pde/p2m

PDE2536PMEU
PDE2536TCUK
Moduflex Valve System - P2M

Parker Hannifin Corporation

Pneumatic Division - Europe
51
Parker Worldwide
Europe, Middle East, Africa IE – Ireland, Dublin North America
Tel: +353 (0)1 466 6370
AE – United Arab Emirates, [email protected] CA – Canada, Milton, Ontario
Dubai Tel: +1 905 693 3000
Tel: +971 4 8127100 IL – Israel
Tel: +39 02 45 19 21 US – USA, Cleveland
[email protected]
[email protected] Tel: +1 216 896 3000
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0 IT – Italy, Corsico (MI)
[email protected] Tel: +39 02 45 19 21 Asia Pacific
[email protected] AU – Australia, Castle Hill
AT – Eastern Europe, Wiener
Neustadt KZ – Kazakhstan, Almaty Tel: +61 (0)2-9634 7777
Tel: +43 (0)2622 23501 900 Tel: +7 7273 561 000 CN – China, Shanghai
[email protected] [email protected] Tel: +86 21 2899 5000
AZ – Azerbaijan, Baku NL – The Netherlands, Oldenzaal HK – Hong Kong
Tel: +994 50 2233 458 Tel: +31 (0)541 585 000 Tel: +852 2428 8008
[email protected] [email protected]
IN – India, Mumbai
BE/LU – Belgium, Nivelles NO – Norway, Asker Tel: +91 22 6513 7081-85
Tel: +32 (0)67 280 900 Tel: +47 66 75 34 00
[email protected] JP – Japan, Tokyo
[email protected]
Tel: +81 (0)3 6408 3901
BG – Bulgaria, Sofia PL – Poland, Warsaw
Tel: +48 (0)22 573 24 00 KR – South Korea, Seoul
Tel: +359 2 980 1344
[email protected] Tel: +82 2 559 0400
[email protected]
PT – Portugal MY – Malaysia, Shah Alam
BY – Belarus, Minsk
Tel: +351 22 999 7360 Tel: +60 3 7849 0800
Tel: +48 (0)22 573 24 00
[email protected] [email protected] NZ – New Zealand, Mt Wellington
RO – Romania, Bucharest Tel: +64 9 574 1744
CH – Switzerland, Etoy
Tel: +41 (0)21 821 87 00 Tel: +40 21 252 1382 SG – Singapore
[email protected] [email protected] Tel: +65 6887 6300
CZ – Czech Republic, Klecany RU – Russia, Moscow TH – Thailand, Bangkok
Tel: +420 284 083 111 Tel: +7 495 645-2156 Tel: +662 186 7000
[email protected] [email protected]
TW – Taiwan, Taipei
DE – Germany, Kaarst SE – Sweden, Spånga Tel: +886 2 2298 8987
Tel: +49 (0)2131 4016 0 Tel: +46 (0)8 59 79 50 00
[email protected] [email protected]
South America
DK – Denmark, Ballerup SL – Slovenia, Novo Mesto
Tel: +45 43 56 04 00 Tel: +386 7 337 6650 AR – Argentina, Buenos Aires
[email protected] [email protected] Tel: +54 3327 44 4129

ES – Spain, Madrid TR – Turkey, Istanbul BR – Brazil, Sao Jose dos Campos

Tel: +34 902 330 001 Tel: +90 216 4997081 Tel: +55 800 727 5374
[email protected] [email protected] CL – Chile, Santiago
FI – Finland, Vantaa UA – Ukraine, Kiev Tel: +56 2 623 1216
Tel: +358 (0)20 753 2500 Tel: +48 (0)22 573 24 00 MX – Mexico, Toluca
[email protected] [email protected] Tel: +52 72 2275 4200
FR – France, Contamine s/Arve UK – United Kingdom, Warwick
Tel: +33 (0)4 50 25 80 25 Tel: +44 (0)1926 317 878
[email protected] [email protected]
GR – Greece, Athens ZA – South Africa, Kempton Park
Tel: +30 210 933 6450 Tel: +27 (0)11 961 0700
[email protected] [email protected]
European Product Information Centre
HU – Hungary, Budaörs Free phone: 00 800 27 27 5374
Tel: +36 23 885 470 (from AT, BE, CH, CZ, DE, DK, EE, ES, FI,
[email protected] FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU,
SE, SK, UK, ZA)

© 2017 Parker Hannifin Corporation. All rights reserved. Catalogue PDE2536TCUK - V7 - April 2017

Parker Hannifin Ltd.

Tachbrook Park Drive
Tachbrook Park, Warwick CV34 6TU
United Kingdom
Tel.: +44 (0) 1926 317 878
Fax: +44 (0) 1926 317 855
[email protected]
www.parker.com Your local authorized Parker distributor