Scribd
Upload
85 views1 page

Eowave Sensor Datasheet Position Sensors

Eowave Position Sensors are resistive ribbons that output a voltage corresponding to position along the ribbon. This allows for infinite accuracy in detecting position. The sensors are well-suited for musical applications to control pitch glissandos or theremin-like effects. The datasheet provides technical specifications for the sensors such as a resistance of 2.5kΩ/100mm, a tolerance of +/-30%, and dimensions of 22mm wide and 0.5mm thick.

Uploaded by

Anonymous a49Xzs7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views1 page

Eowave Sensor Datasheet Position Sensors

Eowave Position Sensors are resistive ribbons that output a voltage corresponding to position along the ribbon. This allows for infinite accuracy in detecting position. The sensors are well-suited for musical applications to control pitch glissandos or theremin-like effects. The datasheet provides technical specifications for the sensors such as a resistance of 2.5kΩ/100mm, a tolerance of +/-30%, and dimensions of 22mm wide and 0.5mm thick.

Uploaded by

Anonymous a49Xzs7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Eowave Sensor Datasheet

Position Sensors

FEATURES APPLICATIONS
Linear Potentiometer Industry
10cm/30cm/40cm/50cm Servomotors
Resistive
Amusement equipment
Continuous controller
Music Live control

Eowave Position Sensors are resistive ribbons. This device outputs the voltage corresponding to the
position with 2,5kΩ/100mm. This technology allows an infinite accuracy.
For musical applications, controlling the pitch with a position ribbon will make a perfect continuous controller
for glissandos and other theremin-like effects!

Refer to tutorial 1.1: How to make a plug&play ribbon controller

Technical
( specifications
Resistive
( field: 2,5kΩ/100mm
Tolerance:
(
+/-30%
Average pressure: 1 to 3 N
Max. (sensor thickness: 0,5mm
(
Response time: 0,1m/s ( active sensor zone: 10,30,40,50 cm (
Accuracy:
( infinite ( (
Temperature:
( from -25° to 70°C ( (
Ultra-low noise
( ( (
Size: 22 mm wide
( 5g
Weight: ( (
Compatible Eobody1 & 2:
Wiring: 1 x 6.35 mm TRS jack, 2 m-long cable
Compatible Eobody2 Wireless System:
Wiring: 3 pins
Output format: Continuous 0 to 127 (7 bit), 4095 (12 bit)
Power: Built-in phantom 5V DC

step 2 Basic Settings


step 1 Connecting a ribbon sensor to your Eobody2
Plug your sensor and Eobody2 USB8 SensorBox as shown in First Steps Tutorial T 0.1.
For this example, connect the position sensor in Eobody2 USB8 SensorBox input number 1.

step 2 What do I need to remember about this sensor?

Position sensors cannot be cut.


Non sensitive surface can be taped on a plane surface.
Sensitive face can be covered with tape.

Position sensors are very easy to configure as their range goes continuously
from 0-127. It means that in most cases, using the Eobody2 internal
process is not necessary. In the Editor routing window, you will be able to
choose the destination (pitch bend or others).

eowave c 2007-2008 All Rights Reserved. [email protected] www.eowave.com

You might also like