Scribd Logo
Upload

Welcome to Scribd!

  • 681 views

    Load Computation

    Uploaded by

    MIHDI PALAPUZ
    The document provides details on member weights and load calculations for various building elements. It includes load values for walls, roofs, floors, partitions and other structural components. Tables list minimum design dead loads for ceilings, flooring, roofing, walls and other building elements. Load calculations are provided for slabs, columns, total structure weight and load per column for different building types including a mall, hotel, and ballroom. Design dead load criteria and load values are also specified for concrete, masonry walls and footings.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Load Computation

    Uploaded by

    MIHDI PALAPUZ
    681 views11 pages
    The document provides details on member weights and load calculations for various building elements. It includes load values for walls, roofs, floors, partitions and other structural components. Tables list minimum design dead loads for ceilings, flooring, roofing, walls and other building elements. Load calculations are provided for slabs, columns, total structure weight and load per column for different building types including a mall, hotel, and ballroom. Design dead load criteria and load values are also specified for concrete, masonry walls and footings.

    Original Description:

    loads

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details on member weights and load calculations for various building elements. It includes load values for walls, roofs, floors, partitions and other structural components. Tables list minimum design dead loads for ceilings, flooring, roofing, walls and other building elements. Load calculations are provided for slabs, columns, total structure weight and load per column for different building types including a mall, hotel, and ballroom. Design dead load criteria and load values are also specified for concrete, masonry walls and footings.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    681 views11 pages

    Load Computation

    Uploaded by

    MIHDI PALAPUZ
    The document provides details on member weights and load calculations for various building elements. It includes load values for walls, roofs, floors, partitions and other structural components. Tables list minimum design dead loads for ceilings, flooring, roofing, walls and other building elements. Load calculations are provided for slabs, columns, total structure weight and load per column for different building types including a mall, hotel, and ballroom. Design dead load criteria and load values are also specified for concrete, masonry walls and footings.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 11
    At a glance
    Powered by AI
    The document discusses structural design load criteria and minimum dead loads for various building materials.

    The loads considered are dead load, live load, superimposed dead load, wind load.

    Minimum design dead loads are specified for ceilings, floors, floor finishes, roof and wall coverings, frame walls, hollow concrete masonry units, wood joists, and more.

    MEMBER WEIGHT

    LL Kpa
    WALL 3.8 Kpa
    ROOF Kpa
    Occupancy Use 0 Kpa
    Topping & tiles= 0 Kpa l=1 16
    Ceiling+ Services= Kpa l=2 13.2
    Meachanical duct= Kpa
    Partiton= 0 Kpa l=3 11.7
    W= 1.2 Kpa l=4 9.68
    l=5
    TRIBUTARY AREA

    A C
    S
    B D
    L

    AB/CD= WS/3
    AC/BD= WS/6(3-M^2)
    M= S/L
    Slab 1
    S= 6
    L= 6
    M= 1
    AB/CD= 2.4 TOTAL Pu = for columns ( assumed base on weight assigned)
    AC/BD= 2.4 1036.8 KN

    4.5
    6

    at entrance
    0.8607968

    8.6079684

    SOHAR MALL
    *for mall sohar TOTAL UNFACTORED WEIGHT OF THE STRUCTURE =
    TOTAL UNFACTORED WEIGHT OF THE STRUCTURE APPLIED =
    thk
    floor wt= 0.2 WEIGHT OF ROOF
    4.7088 kpa
    walls

    NO. OF SUPPORTS 1408

    LOAD PER COLUMN 863.28

    for ski TOTAL UNFACTORED WEIGHT OF THE STRUCTURE =


    for uniform loads TOTAL UNFACTORED WEIGHT OF THE STRUCTURE APPLIED =
    s 9.255
    l 11.23 WEIGHT OF ROOF

    pu 1 3990.845 kn
    pu 2 1338.46 kn
    total columns
    load per columns

    *hotel and ballroom


    pu= 1091.336 kn
    s 11.055 TOTAL UNFACTORED WEIGHT OF THE STRUCTURE =
    l 13.473 TOTAL UNFACTORED WEIGHT OF THE STRUCTURE APPLIED =
    floor wt= 0.18
    4.23792 kpa WEIGHT OF ROOF

    0.18
    4.23792 kpa
    total columns
    load per columns
    TOTAL UNFACTORED WEIGHT OF THE STRUCTURE = 144113.328 KN
    TOTAL UNFACTORED WEIGHT OF THE STRUCTURE APPLIED = 81785.16
    TOTAL =

    744481.875 KN
    467380.25 KN

    3637.116 KN

    1,215,499.24

    KN

    180229.438 KN
    86124.93 KN

    KN

    266,354.37

    199
    1,338.46

    156270.469 KN
    93942.031 KN

    KN

    250,212.50

    112
    2,234.04
    URE = 144113.328 KN
    URE APPLIED = 81785.164 KN
    Table 204-2 Minimum Design Dead Load(Kpa) (Use actual loads when available)
    MINIMUM DESIGN DEAD LOAD (Kpa)

    CEILINGS FLOOR FILL


    Acoustical Fiber Board 0.05 Kpa Cinder Conc per mm 0.017
    Gypsum board(per mm thk) 0.008 Kpa Lightweight conc per mm 0.015
    Mechanical duct allowance 0.2 Kpa Sand per mm 0.015
    Plaster on tile or Conc. 0.24 Kpa Stone Conc per mm 0.023
    Plaster on wood lath 0.38 Kpa
    Suspended steel chamber channel 0.1 Kpa FLOOR AND FLOOR FINISHES
    Wood furring Suspention System 0.12 Kpa asphalt block(50mm),13mm mortar 1.44
    Cement finish(25mm) on stone conc. Fill
    COVERING, ROOF & WALL Ceramic or Quarry tile(20mm) on 1.53
    Asphalt shingles 0.1 Kpa 25mm Mortar bed
    Cement Tile 0.77 Kpa Ceramic or Quarry tile(20mm) on 0.77
    Clay tile(for mortal add 0.48KPa) 13mm Mortar bed
    Book tile(50mm) 0.57 Kpa Ceramic or Quarry tile(20mm) on 1.1
    Book tile(75mm) 0.96 Kpa 25mm Mortar bed
    Ludowici 0.48 Kpa Conc. Fill finish(per mm thk) 0.023
    Roman 0.57 Kpa hardwood flooring 22mm 0.19
    Spanish 0.91 Kpa Linoleum or asphalt tile 6mm 0.05
    Composition Marble & mortar on stone conc. Fill 1.58
    Three-ply ready roofing 0.05 Kpa Slate(per mm thk) 0.028
    Four-ply felt & gravel 0.26 Kpa Solid flat tile on 25mm mortar base 1.1
    Five-ply felt & gravel 0.29 Kpa Subflooring 19mm 0.14
    Copper or Tin 0.05 Kpa Terrazzo(38mm)directly on slab 0.91
    Corr. Asbestos-cement roofing 0.19 Kpa Terrazzo(25mm)directly on stone conc. Fill 1.53
    Deck metal 20Gauge 0.12 Kpa Terrazzo(25mm)50mm stone conc. 1.53
    Deck metal 18Gauge 0.14 Kpa Wood Block(76mm)on mastic no fill 0.48
    Fiberboard 13mm 0.04 Kpa Wood Block(76mm)on 13mm mortar base 0.77
    Gypsum sheating 13mm 0.1 Kpa
    Insulation,roof boards(per mm thk) FRAME WALLS
    Cellular glass 0.0013 Kpa Exterior stud walls
    Fibrous glass 0.0021 Kpa 50x100 @ 400mm,15mm gypsum,
    Fiberboard 0.0028 Kpa insulated,10mm siding 0.53
    Pertile 0.0015 Kpa 50x150 @ 400mm,15mm gypsum,
    Polysterene Foam 0.0004 Kpa insulated,10mm siding 0.57
    Urethane Foam w/ skin 0.0009 Kpa Exterior stud wall w/ brick veneer 2.3
    Plywood(per mm thk) 0.006 Kpa Window glass,frame,& sash 0.38
    Rigid Insulation(13mm) 0.04 Kpa Clay brick wythes:
    Skylight,metal frame 10mm 100mm 1.87
    wire glass 0.38 Kpa 200mm 3.8
    Slate(5mm) 0.34 Kpa 300mm 5.5
    Slate(6mm) 0.48 Kpa 400mm 7.42
    Waterproofing membranes:
    Bituminious,gravel-covered 0.26 Kpa
    Bituminious,smooth-covered 0.07 Kpa
    Liquid applied 0.05 Kpa
    Single-ply sheet 0.03 Kpa
    wood Sheating(per mm thk) 0.0057 Kpa
    Wood Shingles 0.14 Kpa
    Kpa
    Kpa
    Kpa
    Kpa

    Kpa FLOOR,WOOD JOIST (no plaster)


    Joist sizes Joist-Spacing
    Kpa (mm) 300mm 400mm 500mm
    50x150 0.3 0.25 0.25
    Kpa 50x200 0.3 0.3 0.25
    50x250 0.35 0.3 0.3
    Kpa 50x300 0.4 0.35 0.3

    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa
    Kpa

    Hollow Concrete Masonry units


    Note: add for each face plastered 0.24 Kpa
    Kpa Width Thickness(mm)
    Grout spacing
    100 150 200
    Kpa Class C 16.5 KN/cu.m. Density of Unit
    Kpa No Grout 1.05 1.15 1.48
    Kpa 800 1.53 2.01
    600 1.63 2.2
    Kpa 400 1.92 2.54
    Kpa FULL 2.63 3.59 stl load
    Kpa Class B 19.6 KN/cu.m. Density of Unit conc. Load
    Kpa No Grout 1.24 1.34 1.72 wal/partitions
    800 1.72 2.25 LL/OCCUPANCY USE
    600 1.87 2.44
    400 2.11 2.82
    FULL 2.82 3.88
    Class A 21.2 KN/cu.m. Density of Unit
    No Grout 1.39 1.44 1.87
    800 1.82 2.39
    600 1.96 2.59
    400 2.2 2.92
    FULL 2.97 3.97
    0.096

    1.90272

    accomodation load for footing

    984.24
    28.12611

    2.4
    LOAD CRITERIA

    DEAD LOAD
    Reinforced Conc= 24KN/cu.m.
    Super Imposed DL:
    As internal masonry walls 4" CHB= 2.5KPa
    External masonry wall 6" CHB= 3.6KPa
    Exterior wall 6" CHB w/ window= 3.6KPa
    Floor fin.,toppings,plaster & screed= 1.2KPa
    Ceiling & utilities= 0.60KPa

    LIVE LOAD
    Offices= 2.4KPa
    Stairs & hallways= 4.80KPa
    Flat Conc. Roofs= 3.00KPa
    Restroom= 2.4KPa
    movable Partion= 1.00KPa

    ACI LIMITATION
    Mini. Thk of slab unless deflection are computed

    Member End Condition fy=40ksi fy=60ksi

    solid 1-way Simple Support S/25 S/20

    Slabs 1-end Continous S/30 S/34


    Both Ends S/35 S/18

    Materials :

    Concrete : Normal weight concrete with 28-days compressive cube streght ( Cylindrical compressive strenght)
    as follows;

    FOUNDATION 30 mpa ( Fc' -= 24mpa)


    SUSPENDED SLABS and BEAMS 30 mpa ( Fc' -= 24mpa)
    COLUMNS 30 mpa ( Fc' -= 24mpa)
    SHEAR WALLS 30 mpa ( Fc' -= 24mpa)

    Concrete Reinforcement : ASTM A615M Grade 60 ( minimum yield stress 420 Mpa ).

    Ec = 23025.3 Mpa
    Es = 21000 Mpa

    LOAD COMBINATION
    All designs for shear walls and link beams were compute using ACI - 318 / IBC load Combinations

    1.4DL
    1.7LL
    1.4(D+SDL)+1.7LL
    IBCx+IBCz+(1.4DL+1.7LL+SDL)

    Dl DEAD LOAD
    LL LIVE LOAD
    SDL SUPERIMPOSED DEAD LOAD
    WL WIND LOAD

    FOUNDATION:
    Bearing Capacity as Soil Report
    Foundation Level as Soil Report

    You might also like