RULES & REGULATIONS No readmission / admission /promotion can be made after 8 weeks

FOR THE FOUR YEAR DEGREE COURSE IN of the commencement of instruction for First year, (Year Wise
ENGINEERING / INFORMATION TECHNOLOGY Scheme), and after 4 weeks from the commencement of instruction
(Applicable to students admitted during of semester in II, III and IV years (Semester Scheme) respectively.
Academic year 2010-11 onwards) In case there are any court cases consequent to which the Convenor
of Admissions / Principal is compelled to admit a student after the
Note : All the rules and regulations, hereinafter specified shall be read
announced last date of admissions, the admission (seat) of such

.T
as a whole for purpose of interpretation.
student be reserved for the subsequent year on a supernumerary
PART-I ADMISSION basis.
1. A candidate for admission to the Four Year Degree Course in No make - up / supplementary or any other examinations except the
Engineering must have passed the Intermediate Examination of the internal tests shall be conducted during the instruction period of the
Board of Intermediate Examination, Government of Andhra Pradesh Semester course, except for the IV year II semester course.
with Mathematics, Physics and Chemistry as optional subjects, or 2.a) The following courses of study are provided under the Faculty of

.E
any examination recognised by the Osmania Unversity as equivalent Engineering.
thereto.
i) Biomedical Engineering ii) Civil Engineering
2. All the eligible applicants for admission into First year shall have to
iii) Computer Science & iv) Electrical & Electronics
qualify the EAMCET Examination conducted by the Govt. of A.P.
The candidate will be admitted strictly in accordance with the merit Engineering Engineering
secured at the Entrance Examination keeping in view the rules in v) Electronics & Communication vi) Instrumental
force regarding the reservations of seats of various categories of Engineering Engineering

.C
candidates. Diploma qualified candidates will be considered for vii) Mechanical Engineering viii)Production Engineering
admission into the first year if desired on the rank obtained in ECET
within the seats alloted to such category. b) The Information Technology course is provided under the Faculty
of Informatics.
3. Diploma qualified candidates seeking admission into the Second
year under lateral entry scheme shall have to qualify in the ECET 3. Each candidate will be allotted to one of the course at the timje of
examination of the concerned branch. admission strictly depending on the merit secured at the Entrance
Examination and subject to the rules in force regarding reservations
4. Candidates admitted under Management / NRI quota will be of seats.
.J
governed by the rules specified by the Govt. of Andhra Pradesh
from time to time. a) Candidates of the Four year degree course who fail to fulfil all
the requirements for the award of the degree as specified
PART - II DURATION AND BRANCHES OF STUDY hereinafter within eight academic years from the time of
1. The duration of the course is four years. The first academic year admission, will forfeit their seat in the course and their admission
shall comprise of : will stand cancelled.
M
Instruction........... 30 Weeks (Minimum) b) Diploma candidates admitted to the second year under lateral
entry scheme shall fulfill all the requirements for the award of
Each of the subsequent three academic years shall be divided into
the degree as specified hererinafter within six academic years
two semesters hereinafter referred to as the First semester and Second
from the time of admission failing which they will forfeit their
semester in chronological order. Each semester shall comprise of :
seat in the course and their admission will stand cancelled.
Instruction .................... 15 Weeks (Minimum)
1 2
PART-III AWARD OF DEGREE 3. If a candidate who has pursued a Regualar Course of Study of any
1. The Degree of Bachelor of Engineering will be conferred on a year / semester wishes to undergo the same course again, he / she
candidate who has pursued a ‘Regular Course of Study’ for four may be permitted to enroll again as a regular student for the course
academic year (three academic year for candidates admitted in II of the year / semester, when next offered, depending on the
year under lateral entry scheme) as hereinafter prescribed in the availability of seats, provided that he / she undertakes to foregbo
schemeof instruction and has passed all the examinations prescribed his / her attendance secure him/her for that year / semester previously
and provided further that he/she has not pursued a ‘Regular Course

.T
in the scheme of examination.
2. i) A regular course of study for eligibility to appear at the B.E. of Study’ in any higher semester. For the award of division, however,
Examination of any year or semester shall mean putting in attedance he /she shall have the benefit of the higher of the aggregate marks
of not less than 75% aggregate in lectures, practicals, drawing, secured in that year / semester.
workshops, field work, project, seminars extension etc., in subjects PART IV - SCHEME OF INSTRUCTION AND EXAMINATION
listed in the scheme of instruction. The cumulative montly attendance 1. Instruction in the various subjects in each year / semester shall be
in each subject and the aggregate attendance shall be displayed on provided by the college as per the scheme of instruction and syllabus

.E
the notice board. prescribed.
ii) Attendance atg N.C.C. Campus or Inter Collegiate or Inter University 2. The First year of the B.E. Course shall be on the annual examination
or Inter-State or International matches or debates or Educational pattern. The second, third and fourth year shall be on the semester
excursion or such other Inter - University activities as approved by pattern.
the authorities, involving journeys outside the city in which the 3. The distribution of marks of sessionals based on the internal
college is situated, will not be counted as absence. However, such assessment by concerned teacher and that for University Exam shall
absence should not exceed (4) weeks of the period of instruction, in be as follows :

.C
a semester.
iii) In any year / semester of the course if a candidate fails to secure the Subject Sessional Univ. Exam
minmum percentage of attendance, he / she shall not be eligible to i) Each theory subject 25* 75**
appear in the examination of that year / semester and he/she shall ii) Each practical or drawing subject 25* 50
have to enroll himself/herself to undergo afresh a ‘Regular Course for which less than (6) periods per week
of Study’ of the corresponding year / semester in subsequent are provided in the scheme of instrtuction.
academic session, in order to become eligible to appear for the iii) Each practical or drawing subject for 50 100
.J
examination. which (6) Periods per week are provided
iv) The attendance shall be calculated from the date of commencement in the scheme of instruction.
of the classes as per the almanac communicated by the University.
iv) Project 50 Excellent /
v) The candidates of the First Year courses who have put in not less Very Good / Good /
than 40% of attendance, can seek readmission to fulfil the attendance Satisfactory /
requirement, without appearing for the Entrance Test during Unsatisfactory
M
subsequent year, and such admission shall be treated as
supernumerary. * 5 Marks be allotted for assignments in the subject out of the 25
vi) In respect of others who have put in less than 40% attendandce in sessional marks, the rest being based on Internal Tests. There shall
the First year, they have to seek admission afresh going through the be three internal tests for Ist year and 2 internal tests for 2nd year
Entrance test along with fresh candidates. onwards (Semester) each of 20 marks. Average of all three tests
should be taken for year wise course and average of two tests should
3 4
 be taken for semester course. For subjects where the sessional marks PART V - RULES OF PROMOTION
are 50, the assignment will carry 10 marks weightage and internal 1. Rules of promotion are as under :
tests weightage will of 40 marks.
** The question paper will be of two parts. Part A and Part B. Part A is S.No. Semester / Class Conditions to be fulfilled for
compulsory and should cover the entire syllabus, and carries 25
marks. The questions should be of 2 or 3 marks each and 10 questions 1. From BE I year to a) Regular course of study of BE I year
I Sem of BE II year

.T
are to be set. Part B will comprise of seven (7) questions. There has b) Must have passed atleast 50% of
to be one question in each unit of the syllabus and the remaining papers prescribed of BE I year. The
two questions may be from the total syllabus of all 5 units. However, number of paper a candidate can have
there should not be more than 2 questions from any unit. as backlogs is as under.
4. The programme of instruction, examination and vacations shall be No. of papers No. of backlogs
notified by the Dean, in consultation with University. prescribed permitted
5. The medium of instruction and examination shall be English. for BE I year

.E
Note : To enable the B.E. final year students to complete the course 9 5
requirements intime, there shall be make - up exams for IV year II 10 5
semester only, within one month of publication of results of IV
year II semester main examinations. 11 6
6. The examinations prescribed may be conducted by means of written 2. From I Sem. of BE II Yr. a) Regular course of study of I Sem. of
papers, practicals and oral tests, inspection of certified sessional to II Sem of BE II Year II year.

.C
work in drawing and laboratories and workshop or by means of any
combination of these methods as may be deemed necessary. 3. From BE II Yr. II Sem. a) Regular course of study of II Sem to
to BE III Yr. I Sem. of BE II year.
7. All the general rules for examination (given under Partg VIII Rules
23 to 29) shall be adhered to. b) No. of backlogs, if any of BE I & BE
II years put together shall not exceed
8. A candidate shall be deemed to have fully passed the Examination 50% of the total number of papers
of any year / semester, if he/she secures not less than minimum prescribed for the I & II Semester of
marks as hereinafter prescribed. BE II year.
.J
Minimum Pass Marks in the University Examination shall be :
No. of papers No. of backlogs
Each theory subject 40% of Univ. Exam prescribed permitted in
Each Practical subject/project 50% of Univ. Exam for I & II Sem. I & II Year
Overall aggregate of Univ. Exam & of BE II year put together
Sessional marks of a Semester 40% 12 6
M
There shall however be no minimum for the sessional marks secured 13/14 7
by a student in a subject or in all the subjects put together. 15/16 8
9. If a candidate in any year/semester/examination of the course fails
to secure the minimum marks in any subjects, then he/she shall have 17/18 9
to appear only in the failed subject/s of the semester.
5 6
4. From I Sem. of BE III Yr. a) Regular course of study of I Sem. of PART - VII IMPROVEMENT OF DIVISION
to II Semester of III Year BE III year. 1. A candidates who wishes to improve his/her division may do so
within one academic year immediately after having passed all the
5. From II Sem. of BE III Yr. a) Regular course of study of II Sem.of examination of BE Degree Course by reappearing at not more than
to I Semester of IV Year. BE III year.
two semesters (All subjects pertaining to the semester taken together)
b) No.of backlogs, if any of BE I, BE II examinations. For the award of division, he/she will have the benefit
& III years put together shall not

.T
of the higher of the two aggregates of marks secured in the
exceed to 50% of the total number of corresponding semesters).
papers prescribed for the I & II
Semester of BE III year. 2. In case of candidates who have secured less than 40% of the total
aggregate (of I, II, III and IV years), needed for a Pass Division, the
No. of papers No. of backlogs candidate can appear for improvement in individual subjects to
prescribed permitted in BE become eligible for a PASS Division.
for I & II Sem. I & III Year

.E
of BE III year put together PART VIII - GENERAL RULES OF EXAMINATION
14 7 1. All examinations of the Osmania University shall be held at such
places as it may be decided and at sucfh other centres on such dates
15/16 8 as may be notified.
17/18 9 2. Application for permission to appear at every examination shall be
made on the prescribed form accompained by three passport size
5. From I Sem. of Regular course of study of BE IV year I

.C
full face photographs (not profile) which along with the necessary
BE Yr. II Sem. Semester certificates regarding attendance, practical work etc., and the
prescribed fee, should be sent to the Controller of Examinations on
PART VI - AWARD OF DIVISION or before the date fixed for this purpose.
1. Candidates who have passed all the examinations of the B.E. Degree 3. When a candidate’s application is found in order and he/she is eligible
Course shall be awarded one of the following divisions in accordance to appear at an examination, the Controller of Examinations, shall
with the marks secured by them in all 1 year and all the I and II furnish him with a HallTicket with the photographs attached to it,
semester examinations of II, III and IV years taken together. enabling the candidate to appear in the Examination, and this Hall
.J
I-Division : 60% and above (I Division with Distinction shall be Ticket shall have to be produced by the candidates before he/she
awarded to those who have secured 70% and above and who have can be admitted to the premises where the Examination is being
passed all subjects in each semester which are reckoned for the award held or to a part of the said premises as well as to the Examination
of division. Candidates who have not passed the examinations in Hall.
first attempt are not eligible for getting Rank Certificate / Gold
Medal). 4. A candidate who fails to present himself / herself for the Examination
M
for any reason whatsoever, excepting shortage of attendance or who
II-Division : 50% and above but less than 60%
fails to pass the examinations, shall not be entititled to to claim refund
Pass Division : 40% and above but less than 50% of the whole or any part of the examination fee, nor for the reservation
The marks secured for the sessional work and at the University of the examination fee for a subsequent examination or examinations.
Examination in each subject, shall be shown separately in the
memorandum of marks.
7 8
5. A candidate after he/she been declared successful in the whole WITH EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
examination shall be given certificate setting forth the year of SCHEME OF INSTRUCTION & EXAMINATION
examination, the subjects in which he/she was examined and, the
division in which he/she was placed. B.E. I - YEAR (FULL TIME)
6. No candidate shall be allowed to put in attendance for or appear at
Examinations for different degrees and different faculties at one and SEMESTER - I

.T
the same time. Scheme of Scheme of
7. Students who have appeared once at any examination of the Course, Sl. Syllabus Instruction Examination
SUBJECT
need not put in fresh attendance, if they want to reappear at the No. Ref. No. Periods per Maximum
week Duration Marks
corresponding Examinations, notwithstanding the fact that new In
subjects may have been introduced by the University. They will Hours Univ. Sessi-
L D/P Exam onals
however, have to appear at the examinations according to the scheme

.E
of Examination and Syllabus in force. THEORY
PART IX - TRANSITORY REGULATIONS 1. EG 101 English 3 - 3 75 25
1. Whenever, course or scheme of instruction is changed in a particular 2. MT 101 Mathematics - I 3 - 3 75 25
year, two more examinations immediately following thereafter, shall 3. MT 102 Mathematics - II 3 - 3 75 25
be conducted according to the old syllabus/regulations. Candidates
not appearing at the examinations or failing in them shall take the 4. PH 101 Engineering Physics 3 - 3 75 25
examination subsequently according to the changed syllabus/ 5. CH 101 Engineering Chemistry 3 - 3 75 25

.C
regulations.
6. CS 101 Programming in 3 - 3 75 25
C & C++
**** 7. CE 101 Engineering Mechanics 3 - 3 75 25
8. CE 102 Engineering Graphics - 6 3 100 50
PRACTICALS
.J
1. PH 132 Physics Lab - 3 3 50 25
2. CH 132 Chemistry Lab - 3 3 50 25
3. ME 131 Workshop Practice - 3 3 50 25
4. CS 131 Programming Lab - 3 3 50 25
M
5. EG 131 English Language Lab - 2 3 50 25
TOTAL 21 20 - 875 350

9 10
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 1. Barack Obama : A Trendsetter
EG 101 UE 2. Rendezvous with Indra Nooyi
ENGLISH (THEORY) 3. Muthyala Raju Revu : An Engineer Turned IAS Officer.
Instruction 3 Periods per week 4. R. Madhuvan : Engineering to Farming.
Duration of University Examination 3 Hours Note : Units I and V are from the book ‘Essential English’, Unit-III is
University Examination 75 Marks from Communication Skills & Soft Skills and Units-II and IV are from

.T
Sessional 25 Marks both Essential English and Communication Skills & Soft Skills.
UNIT-I Suggested Reading :
Effective Communication : Role and importance of communication; 1. E. Suresh Kumar et al., Essential English, Oriental Blackwan, 2010.
Features of human communiction; Process of communication; Types of 2. E. Suresh Kumar et al., Communication Skills and Soft Skills,
communication: Verbal - formal versus informal communication, one way Pearson, 2010.
versus two-way communication; Non-verbal communication; Barriers to 3. Meenakshi Raman et al, Technical Communication, Oxford

.E
communication; Importance of listening in effective communication. University Press, 2009.
UNIT-II 4. K.K. Ramachandran et al., Business Communication, Macmillan,
Oral communication: Importance of oral communication; Seminar skills; 2009.
Speech-making: Types of speeches; Situational dialogues; Speaking 5. Sunitha Mishra, C. Murali Krishna, Communication Skills for
strategies; Interpersonal Communication, Models of interpersonal Engineers, Pearson, 2004.
development - Johari Window; Styles of communication, persuasion

.C
techniques; Team work.
UNIT-III
Written Communication : Paragraph writing; Report writing; Types of
reports, Writing technical reports and scientific papers; Communication
through letters; official and personal letters, letters of complaint, letters
of enquiry and responses, resume writing; cover letters, memos, circulars,
notices, minutes of meeting, writing a statement of purpose, e-mail
.J
etiquette.
UNIT-IV
Remedial English : Common errors, words often confused, tense and
aspect, articles, prepositions, connectives and correlative conjuncts, voice,
concord, direct and indirect speech, question tags, punctuation,
M
homonyms, homophones, synonyms, antonyms, one-word substitutes;
Idiomatic usage.
UNIT-V
Reading comprehension, readinhg strategies.
The following four lessons are prescribed :

11 12
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 UNIT-V
MT 101 Infinite Series :
MATHEMATICS - I Sequence - Infinite Series - Convergence and divergence - Comparison
Instruction 3 Periods per week test - Ratio test, Cauchy’s test - Raabe’s test - Logarithmic series test -
Duration of University Examination 3 Hours Alternating series - Absolute convergence - Conditional convergence.
University Examination 75 Marks Suggested Reading :

.T
Sessional 25 Marks 1) R.K. Jain and S.R.K. Iyengar, Advanced Engineering Mathematics,
Narosa Publications, Third edition, 2009.
UNIT-I
Differential Calculus : 2) B.S. Grewal, Higher Engineering Mathematics, Khanna
Rolle’s theorem - Mean value theorems - Taylor’s series - expansion of Publications, 40th edition, 2007.
functions on power series - curvature - radius of curvarture (Cartesian, 3) M. Venkata Krishna and G. Shanker Rao, A text book of engineering
polar and parametric co-ordinates) Envelopes - Evolutes and Involutes. Mathematics, Jaico Publishing House, Mumbai, 2010.

.E
UNIT -II 4) M.K. Venkatraman, Engineering Mathematics - I, Technical
Functions of Several Variables : Publisher, Chennai.
Tracing of curves in Cartesian and polar coordinates - Limits and 5) H.C. Taneja, Advanced Engineering Mathematics, Vol. I & II, I.K.
continuity of functions of two variables - partial derivatives - Total International Publishing Pvt. Ltd., New Delhi, 2007.
differentials and derivatives - Approximation by total differential -
Derivatives of composite and implicit functions - Higher order partial

.C
derivatives - Homogeneous functions - Taylor’s theorem for functions of
two variables - Maxima and minima of functions of two variables with
constraints - Lagrange’s method Jacobian - change of variables.
UNIT-III
Vector Calculus :
Multiple Integrals : Double and triple integrals - change of order of
integration - scalar and vector fields - Vector differentiation - Dirtectional
.J
derivative - Gradient of a Scalar field - Divergence - Curl of vector field
- Line - Surface and volume integrals - Green’s theorem - in a plane -
Gauss’s divergence theorem - Stoke’s theorem (without proofs) and their
applications.
UNIT-IV
M
Matrix Theory:
Elementary row and column operations on a matrix - Rank of a matrix
Solution of system of linear equations - Linear dependance and
independence of vectors - Characteristic equation - Characteristic roots
and vectors - Caley - Hamilton theorem - Reduction to diagonal form and
normal form - Reduction of a quadratic form into canonical form.
13 14
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 UNIT-IV
MAT 102 Laplace Transforms :
MATHEMATICS - II Laplace Transforms - Inverse transforms - Properties of Laplace tranform
Instruction 3 Periods per week - Laplace transform of unitstep function - Impulse function and periodic
Duration of University Examination 3 Hours functions - Convolution theorem - Solution of ordinary differential
University Examination 75 Marks equations with constant coefficients using Laplace transform.

.T
Sessional 25 Marks Suggested Reading :
UNIT-I 1) R.K. Jain and S.R.K. Iyengar, Advanced Engineering Mathematics,
Ordinary Differential Equations of first order : Narosa Publications, Third edition, 2009.
Introduction to differential equations : Solutions of differential equations 2) B.S. Grewal, Higher Engineering Mathematics, Khanna
- Exact first order differential equations - Integrating factors - Linear first Publications, 40th edition, 2007.
order equations - Bernoulli’s equations - Ricatti’s equation - Clairut’s 3) M. Venkata Krishna and G. Shanker Rao, A text book of engineering

.E
equation - Orthogonal trajectories of a given family of curves, L-R circuits Mathematics, Jaico Publishing House, Mumbai, 2010.
- LCR circuits - Simple Harmonic Motions. 4) M.K. Venkatraman, Engineering Mathematics - II, Technical
UNIT-II Publishers, Chennai.
Linear Differential Equations : 5) H.C. Taneja, Advanced Engineering Mathematics, Vol. I & II, I.K.
Solutions of linear differential equations - Methods for solutions of linear International Publishing Pvt. Ltd., New Delhi, 2007.
equations - differential operator - Solutions of second order linear

.C
homogenous equations with constant coefficients - Method of reduction
of order for variable coefficients - solutions of higher order homogenous
linear equations with constant coefficients - Solutions of non-homogenous
linear equations - Method of variation of parameters.
UNIT-III
Series solution of differential equations :
Introduction - Ordinary and singular points of an equation - Power series
.J
solution - Frobenius method - Special differential equations - Legendre’s
differential equations and its series solution - Rodrigue’s formula -
Generating function for Legendre’s polynomials - Recurrence relations
for Legendre’s polynomials - Orthogonal property of Legendre
polynomials - Chebyshev polynomials - Zeros and extreme points Tn(X)
- Orthogonal properties of Chebyshev polynomials - Recurrence formulae
M
for Tn(X) and Un(X).
UNIT-IV
Special function - Beta function - Relation between Gamma function and
Beta function - Error function - Bessel’s differential equation and its
solution - Bessel’s function and its generating functions.

15 16
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 and time independent wave equations - particle in an Infinite Square
PH 101 well (particle in a box) potential, potential barrier and quantum
ENGINEERING PHYSICS tunneling.
Instruction 3 Periods per week 2.3 Electromagnetic theory : Review of steady and varying fields
Duration of University Examination 3 Hours conduction and displacement current, Maxwell’s equations in integral
University Examination 75 Marks and differential forms, electro magnetic waves, plane wave and

.T
Sessional 25 Marks Poynting vector.
UNIT-I Physical Optics and Lasers (24 Periods) UNIT-III Condensed matter physics (18 periods)
3.1 Crystallography : Introduction - Space lattice - Basis - Unit cell -
1.1 Interference - Coherent and non-coherent sources, division of
Bravais lattices and crystal systems - atomic radius, coordination
amplitude and division of wave front, Inteference in thin films
number effective number of atoms per unitcell, packing fraction
(reflected light) - Newton’s rings
simple cubic - Body centered cubic - Face centered cubic crystals -

.E
1.2 Diffraction - Distinction between Fresnel and Frauhofer diffraction, Miller Indices - Bragg’s law, Experimental determination of lattice
diffraction at a single slit - between slit diffraction - diffraction grating constant by powder deffraction method, Classification of defects in
(N-slits). crystals - line defects, point defects and volume defects - number of
1.3 Polarization - Introduction - Malus law, double refraction, Nicol’s point defects in metals - concentration of Schottky defects and
prism, quarter wave and half wave plates - optical activity - Laurent’s Frankel defects in a crystal - Glasses - Characterizing properties.
half shade polarimeter. 3.2 Band Theory of Solids : Classical free electron theory (qualtitative
1.4 Lasers and holography : Characteristics of Lasers - Spontaneous Energy band formation in solids - Kronig - Penney model (qualtative

.C
and stimulated emission of radiation - Einstein’s coefficients - treatment) - Electron gas - Fermi energy and Fermi level in metals
Population inversion - Ruby laser - Helium - Neon Laser - - Classification of solids into good conductors, semiconductors and
Semiconductor Laser - Applications of lasers, Basic principles of bad conductors.
holography - Construction and reconstruction of image on hologram 3.3 Semiconductors : Instrinsic and Extrinsic semiconductors- concept
- Applicatins of holography. of hole-Concept of Fermi level in semiconductor - carrier
1.5 Fiber Optics : Introduction - Types of optical fibres - propogation concentration in instrinic semiconductors - conductivity in intrinsic
of light through an optical fiber - Critical angle - Acceptance angle semiconductors - Hall effect - LED - Thermistor.
.J
- Numerical aperature (NA) - Types of optical fibers and refraction
UNIT-IV Materials Science (18 periods)
index profiles - fibre drawing process (double crucible method) -
4.1 Dielectric materials : Dielectrics - types of diaelectric polarizations.
Application of optical fibers.
Electronic, ionic, orientation and space-charge polarization -
UNIT-II Modern Physics (16 Periods) Frequency and temperature dependence of diaelectric polarizations
2.1 Elements of Statistical Mechanics : Concepts of phase - space, - Ferro electricity - Barium tritanate - Determination of diaelectric
M
derivation of S=klogW, Types of ensembles - Maxwell - Boltzmann constant by capictance Bridge method-Applications of Ferroelectrics.
statistics, Bose - Einstein statistics, Fermi-Dirac statistics - photon 4.2 Magnetic Materials : Classification of magnetic materials - dia,
gas - Planck’s law of black - body radiation distribution - Rayleigh para, ferro, anti ferro and ferrimagnetism - Weiss molecular field
Jeans law and Wein’s law. theory of ferromagnetism - magnetic domains - hysteresis curve -
Soft and hard magnetic materials - Ferrites structure - spinel and
2.2 Wave mechanics : Wave function and Schrondinger time dependent
inverse spinel and applications of ferrites.
17 18
4.3 Superconductivity : Superconductivity - General properties of super EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
conductors - Meissner effect - Type I and Type II superconductor’s CH 101
- BCS Theory (in brief) - high Tc superconductors (in brief) and ENGINEERING CHEMISTRY
their preparation - Applications of superconductors. Instruction 3 Periods per week
UNIT-V Materials at Reduced size and Characterization Techniques Duration of University Examination 3 Hours
(14 periods) University Examination 75 Marks

.T
5.1 Thin film : Distinction between bulk, thin films and nano materials Sessional 25 Marks
- Thin film preparation techniques-physical vapor deposition (PVD) UNIT - I : ELECTROCHEMISTRY
- thermal evaporation - electron beam evaporation - sputtering and 1.1 Electrodics :
chemical vapour deposition (CVD) - applications of thin - solar cell. Electrode Potentials - Standard Electrode Potentials - SOP & & SRP.
5.2 Nanomaterials : Zero dimensional materials. Properties of materials Electrochemical series-signifcance. Types of Electrodes (a) Gass Electrode
at reduction size - nano scale surface to volume ratio-quantum (Hydrogen electrode) (b) Metal ion (Zn/Zn+2) (c) Redox Electrode

.E
confinement-preparation of nano materials-bottom-upmethods-sol (Quinhydrone Electrode) (d) Metal - Insoluble salt Electrode (Calomel
gel, pulsed laser, sputtering and CVD (Qualitative) - Top-down Electrode) - Nernst equation and its derivation and applications.
methods - ball milling - elementary ideas of Carbon nonotubes - Reverisible and Irreverisble cells : EMF of electrochemical cells-cell
Applications. notation and cell reaction - Numerical Problems.
5.3 Experimental techniques : X-ray diffraction-X-ray fluorescece- 1.2 Battery Chemistry :
Augen (OJ) process - atomic force microscopy (basics) - electron Primary batteries : Zinc-Carbon battery. Secondary batteries Lead - acid
battery, Nickel - Cadmium and Lithium - Ion batteries - Charging and

.C
microscope (SEM and TEM).
Discharging reactions and applications. Fuel Cells : Concept of fuel cells,
Suggested Reading : Methanol-Oxygen fuel cells.
1) M.S. Avadhanulu and P.G. Kshirasagar, Engg. Physics, S.Chand Ist
1.3 Electro Analytical Techniques
edition, 1992.
Principle, Method and Applications of the following techniques
2) R.K. Gaur and S.L. Gupta, Engg. Physics, Dhanpath Rao, 7th Conductometry : Acid - Base titrations
edition, 2005. Potentiometry : Acid - Base and Redox titrations
3) A.K. Bhandhopadhya, Nano Materials, New Age International, Ist pH metry : Acid - Base titrations.
.J
edition, 2007.
4) V. Rajendran, Engineering Physics, Tata McGraw Hill, Ist edition, UNIT - II THERMODYNAMICS AND PHASE RULE :
2008. 2.1 Thermodynamics :
The Concept of Reversible and Irreversible processes. Work done in
Reference Books :
Isothermal & Adiabatic reverisible and irreversible processes.
1) M. Armugam, Materials Science, Anuradha Agencies.
Success and limitations of First law of Thermodynamics. The need for
M
2) R. Murgeshaam, Modern Physics, S. Chand and Co.,
Second law of thermodynamics. Statements of Second law of
3) J.M. Senior, Optical Fibre Communication. thermodynamics. The Cannot Cycle. Heat engine and its efficiency. Carnot
4) A. Goswami, Thin film fundamentals, New Age International. theorem. The concept of entropy. Criteria for spontaneity of a process in
5) C.M. Srivastava and C. Srinivasan, Science of Engg. Materials, New terms of entropy. Entropy changes in reverisible processes. Physical
Age International. significance of entropy. Gibbs and Helmholtz energies and their

19 20
significance. Conditions of equilibrium and spontaneity in terms of free Thermoploastics & Thermosetting resins.
energy. Variation of free energy with temperature and pressure. Gibbs- Types of Polymers :
Helmholtz equation and its applications - Numericals. (i) Plastics : Preparation, Properties & uses of PVC (Plasticized and
2.2 Phase Rule : unplasticised) Teflon and Bakelite.
Definition of terms phase, components and degrees of freedom. Statement (ii) Fibers : Preparation, Properties & uses of Kevlar and Polyurethanes
of Phase rule. Phase rule equation and its applications to one component (perlon-U).

.T
system - water system and two components system- Pb-Ag system. (iii) Rubbers/Elastomers : Natural rubber and its chemical structure.
Pattinson’s Process of desilverization of lead. Valcunization and its significance. Preparation, Properties & Uses
UNIT - III : CORROSION AND WATER CHEMISTRY of Buna-S. Butyl Rubber and Silcone Rubbers.
3.1 Corrosion and its control : 4.2. Biodegradable Polymers - Concept and significance - Polyactic
Causes and effects - Types of corrosion - Chemical (dry) and acid.
electrochemical (wet) corrosion - Mechanism of electrochemical corrosion
4.3 Conducting polymers :

.E
- Formation of anodic and cathodic areas - Gulvanic corrosion, differential
aeration corrosion (waterline and pitting corrosion). Definition, Classification into extrinsic and instrinic polymers. Mechanism
of conduction in polyacteylene. Structure of polyaniline and its doping.
Factors affecting the rate of Corrosion (a) Position of metals in Galvanic Applications of conducting polymers.
Series, (b) Relative areas of anode and cathode, (c) Nature of corrosion
product, (d) Temperature (e) Humidity and (f) pH. 4.4 Composite Materials :
Definition : Types of composites (Fibre reinforced, glass fibre reinforced
Corrosion Control Methods : Cathodic Protection - Sacrificial Anode and carbon fibre reinforced) - Advantages.
Impressed Current Methods.

.C
4.5 Nanomaterials :
3.2 Surface Coating : Introduction : Production methods and applications of Graphite, fullerene
Types of Metallic Coatings, Anode and cathodic Coatings - Methods of and Carbon nanotubes.
Applications of metallic coatings - Electroplating (Nickel Plating) &
Electroless plating (Copper Plating) Paints - constituents and their UNIT-V : CHEMICAL FUELS
functions. 5.1 Fossil fuels
3.3 Water Chemistry : Classification of fuels, primary, secondary - solid, liquid and gaseous
fuels requirements of a good fuel. Determination of Calorific value by
.J
Hardness of water types - units of hardness - determination of temporary
& Permanent Hardness of water by EDTA Method (numerical problems) Bomb Calorimeter - HCV, LCV Theoretical calculation of calorfic value
- Alkalinity of Water & its determination - water softening by Ion - by Dulongy’s formula - numericals. Combustion - Ignition temperature
exchange and reverse osmosis methods - specification of protable water. of a fuel, calculation of Air quantities by Weight and volume required for
Disinfection of drinking water by chlornination- Break point Chlorination combustion of a fuel Numerical problems.
and Ozonization - Boiler troubles : Causes & effects. Solid Fuels : Coal and its chemical composition, Proximate and Ultimate
M
analysis. Liquid Fuels : Fractionation of Petroleuum. Composition and
UNIT-IV MATERIAL Chemistry uses of - Gasoline, Diesel and Kerosene. Cracking & its Significance -
4.1 Polymers : Catalytic cracking by fixed bed method, Knocking. Fuel rating - Octane
Definitions of the terms : Monomer, Polymers, Nomenclature : Homo- and Cetane numbers. Unleaded Petrol - Composition and significance.
Hetero and Copolymers. Tacticity of polymers. Types of Polymerization Automobile Exhaust - Catalytic Converters. Gaseous Fuels - LPG, CNG
(i) Addition (ii) Condensation (iii) Co-Polymersation - Examples. comosition and uses.
21 22
5.2 Bio Diesel EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
Sources : Concept of Trans esterification. Properties and significance CS 101
5.3 Rocket Fuels : PROGRAMMING IN C & C++
Principles of rocket propulsion, Characteristics of a good propellant Instruction 3 Periods per week
Classification of rocket fuels. Duration of University Examination 3 Hours
Suggested Reading : University Examination 75 Marks

.T
1) Puri, Sharma and Pathania, Principles of Physical Chemistry. Sessional 25 Marks
2) P.L. Soni and O.P. Dharmarha, Text Book of Physical Chemistry, UNIT-I
S. Chand & Sons, New Delhi. Introduction of Computers : Components, Block diagram, Operating
3) PC Jain and M Jain, Engineering Chemistry, Dhanpat Rai & Sons Systems, Programming Languages, Assembler, Interpreter, Compiler,
(15th Edn), New Delhi. Loader, Linkers. Number Systems (Binary, Octal), Decimal and Hexal),
Representation of numbers (fixed and floating point), Problem Solving :

.E
4) CP Murthy and A Naidu, Engineering Chemistry, B.S. Publications, Algorithm, Flow Charts.
Hyderabad.
Types, Operators and Expressions : Variable Names, Data Types and
5) JC Kuriacose and J Rajaram, Chemistry in Engineering and Sizes, Constants, Declaration, Type Conversions, Operators, Precedence
Technology, TMH, New Delhi. and Order of Evaluation.
6) O.G. Palanna, Engineering Chemistry, TMH and New Delhi. Control Flow and Behaviour Flow Charts : Statements and Blocks, If
7) S.S. Dara, Engineering Chemistry, S Chand & Sons, New Delhi. Else Switch.

.C
8) Sashi Chawla, Engineering Chemistry, Dhanpat Rai & Sons, New Loops : While, For, Do-While, Break, Continue, Goto and Labels.
Delhi.
UNIT-II
Functions : Basic of Functions, Parameter Passing techniques, Functions
Returning Non-integers.
Storage Classes, External Variables, Scope Rules, Header Files, Static
and Auto Variables, Register Variable, Block Structure, Initialization.
Recursion, The C Preprocessor : # include, # define, conditional
.J
compiliation.
Arrays : One Two and Multi-dimensional arrays, Linear and Binary
Search, Selection and Bubble Sort.
Pointers : Pointers and Addresses, Pointers and Function Arguments,
Pointers and Arrays, Address Arithmetic, Command line arguments.
M
UNIT-III
Structures and Unions : Basics, Structure and functions, arrays of
structures pointers to structures, Self referential structure, Union.
Files : Basics and File Handling functions : Copy file and display file.

23 24
UNIT-IV EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
C++ : Introduction, simple program, standard library, header files, inline CE 101
functions, references and reference parameters, default arguments, empty ENGINEERING MECHANICS
parameter lists, unary, scope resolution operator, function overloading, Instruction 3 Periods per week
function templates. Duration of University Examination 3 Hours
Classes and data abstraction : Class scope, accessing class members, University Examination 75 Marks

.T
interfere, constructions, destructions, const objects and member functions, Sessional 25 Marks
this pointer, new and delete operators, static class members.
C++ Operator overloading : Fundamentals, restrictions, overloading unary UNIT - I
/ binary operators, overloading ++ and ---. System of forces : Concepts of forces, components of forces in a plane
and in space various systems of forces and their resultants, moment of
UNIT-V force and its applications and couples.
C++ Inheritance : Base and derived classes, casting base class, pointers
Equilibrium of force system : Free body diagrams, equations of

.E
to derived class pointers, using member functions overriding, public,
equilibrium of plane force system and spatial force systems.
protected and private inheritance, constructors and destructors in derived
classes. UNIT-II
C++ Virtual Functions : Abstract base class, polymorphism, dynamic Centroid and Centre of gravity : Significance of centroids, and moment
binding, virtual destructors. of area, theorems of Pappus, centroids of line elements, plane areas,
composite areas and volumes, centre of gravity of bodies.
C++ Stream Input/Output : Streams, stream output, stream input.
Friction : Types of friction, limiting friction, laws of friction, static and

.C
C++ Templates : Introduction, class templates, templates and inheritance,
dynamic friction, belt friction, Application of friction to a single body
templates and static members.
and connecting systems, wedge.
C++ Exception Handling : Try, throw, catch.
UNIT-III
Suggested Reading : Area moment of inertia : Definition, polar moment of inertia, transfer
1. Rajaraman V. Computer Programming in C, Prentice Hall of India, theorem, moment of inertia of composite areas, product of inertia, transfer
2008. formula for product of inertia. Mass moment of inertia : Moment of inertia
2. Walter Savitch, Programming in C/C++, Fourth edition, Pearson of masses, transfer formula and moment of inertia of composite bodies.
.J
Educational Publishing, 2008. UNIT-IV
3. Harry H. Cheng, C/C++ for Engineers and Scientists, TMH 2010. Kinematics : Rectilinear motion, curvilinear motion, velocity and
4. Pradip Dey, Manas Ghosh, Programming in C, Oxford, 2007. acceleration types of rigid bodies, motion and analysis in a plane.
5. DM Capper, Introducing C++ for Scientists, Engineers and Kinetics : Analysis as a particle and analysis as a rigid body in translation
Mathematicans, Springer, 2001. central force Motion, equations of planar motion, fixed axis rotations.
M
6. Bjarne Stroustrup, The C++ Programming Language, Pearson , UNIT-V
Third edition, 2000. Work energy method : Equation for translation, work energy principles
7. K.R. Venugopal, Sudeep R. Prasad, Mastering in C, TMH, 1997. applied to a particle motion, connection systems fixed axis rotation, and
plane motion.
8. K.R. Venugopal, RaJ Kumar, T. Ravi Shanker, Mastering in C++,
TMH, 1997.
25 26
Impulse and momentum : Introduction, linear impulse-momentum, force EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
of jet on a vane, principle of conservation of linear momentum, elastic CE 102
impact and types of impacts, loss of kinetic energy, coefficient of ENGINEERING GRAPHICS
restitution. Instruction 6 Periods per week
Suggested Reading : Duration of University Examination 3 Hours
1. F.L. Singer, Engineering Mechanics, Harpper Collins Publishers, University Examination 100 Marks

.T
India, 1904. Sessional 50 Marks
Text Books for Reference : UNIT-I
1. F.P. Beer & E.R. Johnston, Jr. Vector Mechanics for Engineers, TMH, Instruments and their use : Lettering and various types of lines, scales,
2004. reduced and enlarged scales, representative fraction, types of scales plane,
2. S. Rajasekaran, et al, Engineering Mechanics, Vikas Publications, diagonal and vertical.
2002. Geometrical construction : Construction of regular polygons inscribed

.E
3. S.B. Junarkar & H.S. Shah, Applied Mechanics, Charotar in a circle given the side of the polygon.
Publications, 2001. Curves in engineering practice : Construction of engineering curves
4. A Nelson, Engineering Mechanics, Tata Mc Graw Hill Publications, such as ellipse parabola, hyperbola, cycloid, epicycloids, hypocycloid
2009. and involute.
5. Basudeb Bhattacharya, Engineering Mechanics, Oxford Press, 2008. UNIT-II
6. Irving H. Shames & G. Krishna Mohana Rao, Engineering Projections of points and straight lines : Points placed in different

.C
Mechanics, Pearson Education, 2006. quadrants projections-of-straight lines, parallel to one or both the reference
7. M.C. Goyal & G.S. Raghuvanshi, Engineering Mechanics, PHI planes and contained by one or both the reference planes, perpendicular
Learning Private Limited, 2009. to one and inclined to the other and inclines to both the reference planes
8. MV. Seshagiri Rao & D. Rma Durgaiah, Engineering Mechanics, and traces.
Universities Press, 2005. Projections of planes : Perpendicular planes, traces of planes, Oblique
9. R.S. Khurmi, A Text Book of Engineering Mechanics, S. Chand & plane and auxiliary planes.
Company Ltd., 2010.
UNIT-III
.J
10. R.C. Hibbeler & Ashok Gupta, Engineering Mechanics, Pearson
Sections of solids : Polyhedra, solids of revolution, projections of solids
Education, 2010.
with axis inclined to one or both the reference planes.
UNIT-IV
Sections of solids : True shapes of section, sections of prisms, pyramids,
cylinder and cones.
M
Development of surface : Development of surface of various solids such
as prism pyramids, cylinders and cone in simple position.
UNIT-IV
Isometric projections : Isometric scale, Isometric projections of prisms,
pyramids, cones, shapes and combinations of two or three solids.
27 28
Intersection of Surfaces : Intersection of cylinder to cylinder and cylinder EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
to cone. PH 132
Suggested Reading : PHYSICS LAB
1. N.D. Bhatt, Elementary Engineering Drawing, Charotar Instruction 3 Periods per week
Publications, 2004. Duration of University Examination 3 Hours
University Examination 50 Marks

.T
Text Books for Reference:
Sessional 25 Marks
1. K.L. Narayana & K.P. Kannaiah, Text Book on Engineering Drawing,
Scitech Publications, 2002. 1. P-N Junction Diode Characteristics.
2. P.J. Shah, Engineering Graphics, S. Chand & Company Ltd., 2010. 2. Determination of Dielectric constant of a material
3. Dhananjay A Jolhe, Engineering Drawing, Tata McGraw Hill 3. B-H Curve
Publishing Company Ltd., 2008. 4. Determination of Planck’s constant using photocell Photo Cell.
4. K.C. John, Engineering Graphics for Degree, PHI Learning Private

.E
5. CRO - Measurement of frequency, phase and amplitude.
Limited, 2009. 6. Characteristics of a Solar Cell
5. R.K. Dhawan, Engineering Drawing, S. Chand & Company Ltd., 7. Newton’s Rings
2009. 8. Diffraction due to single slit
6. M.B. Shah and B.C. Rana, Engineering Drawing, S. Chand & 9. Diffraction due to double slit
Company Ltd., 2009. 10. Diffraction Grating (normal incidence)
7. Basant Agarwal & C.M. Agarwal, Engineering Drawing, Tata 11. Determination of wavelength of Semiconductor Laser

.C
McGraw Hill Education Pvt. Ltd., 2008.
12. Determination of specific rotator power of an optically active
8. B.V.R. Gupta & Raja Roy, Engineering Drawing, I.K. International substance - Polarimeter.
Publishing House Pvt. Ltd., 2009.
13. Optical Fiber - NA, acceptance angle and power loss
14. Holography recording and reconstruction
15. Intensity measurement using He-Ne laser
16. Hall effect
.J
17. Thermoelectric power
18. Verification of Malus law
19. Double refraction
20. Study of Thermistor characteristics.
21. Determination of the energy gap of a semiconductor.
Demonstration Experiments :
M
A. Preparation of single crystals - slow evaporation method
B. Preparation of nano materials - sol-gel method
C. Preparation of glasses
D. Observation of microstructures using microscope
E. Four-Probe Resistivity apparatus.
29 30
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 ORGANIC POLYMERS
CH 132 11. Preparation of Urea - Formaldehyde and Thiokol rubber.
CHEMISTRY LAB
INSTRUMENTAL CHEMICAL ANALYSIS
Instruction 3 Periods per week 12. Introduction to instrumental chemical analysis and use of electrical
Duration of University Examination 3 Hours and electronic balance up to 4th decimal place.
University Examination 50 Marks

.T
Sessional 25 Marks CONDUCTROMETRY
13. Acid-base titration
VOLUMETRIC ANALYSIS a) Strong acid Vs Strong base
1. Introduction of Volumetric Analysis. b) Weak acid Vs Strong base titration
2. Techniques of Weighing and usage of Simple analysis balance. c) Mixture of acids Vs Strong base titration
PERMANGANOMETRY POTENTIONMETRY

.E
3. Preparation of standard solution of FAS and Standarization of KMnO4 14. Acid base titration
Solution. a) Strong acid Vs strong base using quinhydrone electrode.
4. Preparation of Standard solution of Mohr Salt, Standarization of b) Weak acid Vs stong base titration using quinhydrone electrode.
KMnO4 solution & Estimation of ferrous iron in the give solution. 15. Estimation of Ferrous iron by Redox titration
5. Ore Analysis - Determination of Maganese in pyrolussite. pH METRY
DICHROMETRY 16. Acid base titration

.C
6. Preparation of Standard solution of Potassium Dichromate, a) Strong acid Vs Strong base
Standarization of Molar salt solution & Estimaton of Dichromate b) Weak acid Vs Strong base
chromium in the given solution.
COLOROMETRY
IODOMETRY 17. Verification of Beers law : using potassium permanganate and
7. Preparation of standard solution of potassium dichromate and estimation of KMnO4 (Mn) in the given solution.
standardization of Sodium thiosulphate solution. 18. Determination of Ferrous iron in cement.
8. Estimation of copper in the Brass solution by using standard Hypo
.J
KINETICS
solution.
19. First order reaction - hydrolysis of methyl acetate.
ACIDIMETRY
SPECTROPHOTOMETER
9. Preparation of standard sodium carbonate solution, Standarization
20. Recording of Cu+2 spectrum, absorptivity (Demo only) determination
of hydrochloric acids & Estimation of Carbonate, Bicarbonate in
of λ max and molar.
the given mixture.
M
Suggested Reading :
COMPLEXOMETRY
1. B.D. Khasla, A Ojulati, V.C. Garg., Senior Practical Physical
10. Preparation of standard Magnesium Sulphate solution, standarization
Chemistry, R. Chand and Company, New Delhi, 11th edition.
of EDTA solutionh and estimation of temporary and permanent
hardness in the given sample of water. 2. S.K. Bhasin and Sudha Rani Dhanpat, Laboratory Manual on
Engineering on Engineering Chemistry, Rai Publishing Company.

31 32
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011
ME 131 CS 131
WORKSHOP PRACTICE PROGRAMMING LAB
Instruction 3 Periods per week Instruction 3 Periods per week
Duration of University Examination 3 Hours Duration of University Examination 3 Hours
University Examination 50 Marks University Examination 50 Marks

.T
Sessional 25 Marks Sessional 25 Marks

Branch of Engg. Trades for Practice Trades for 1. Familiarization with an editor
Demonstration Program to be written and tested for the following problems ‘c’
language.
Mechanical Fitting
2. Sin x and Cos x values using series expansion.
Production Carpentary Sheet Metak Work

.E
3. Frequency of occurrence of characteristics and special characteristics
Civil House Wiring Smithy like n, t, white spaces.
EEE Welding PC Assembly 4. Bubble sort with an array.
Plumbing 5. Linear and Binary Searches.
6. Matrix addition and multiplication using pointers.
CSE Fitting
7. Generation of address labels using structures.

.C
ECE Carpentary Welding
8. Sequential file operations.
IT House Wiring Smithy
9. Functions of string manipulations without using library functions.
IT Sheet Metal Work PC Assembly
Plumbing The following problems should be programmed using C++
programming language.
Grades for exercises in the trades for practice shall be given to the 1. Finding maximum, minimum and sum of given set of numbers.
student Emphasis must be given for developing necessary skills.
2. Implementation of a matrix class.
.J
3. Classes for Bank Account, Student Information, Library catalog.
4. Creation of complex class with operator overloading.
5. Creation of inheritance hierarchy for graphic shapes.
6. Template functions for min ( ) and max ( ) for finding minimum
and maximum in a list of numbers.
M
7. Programs for finding the number of characters, words and sentences
in the given test input.

33 34
 EFFECT FROM THE ACADEMIC YEAR 2010 - 2011 10. Public Speaking : Advantages of public speaking, essentials of an
EG 131 effective speech, rehearsal techniques, planning and delivering a
ENGLISH LANGUAGE LAB speech.
Instruction 3 Periods per week 11. Role play : Use of dialogues in a variety of situations and settings.
Duration of University Examination 3 Hours 12. Effective use of a dictionary and thesaurus : Advantages of using a
University Examination 50 Marks dictionary and thesaurus.

.T
Sessional 25 Marks
Suggested Reading :
Note : While teaching the following items, emphasis may be laid on 1. E. Suresh Kumar et al, English for Success (with CD), Cambridge
intensive practice in the language lab. Lecturing may be avoided as far as University Press India Pvt. Ltd. 2010.
possible. 2. T. Balasubramanian, A Textbook of English Phonetics for Indian
1. Introduction to English Phonetics : Introduction to auditory, acoustic Students, Macmillian, 2008.

.E
and articulatory phonetics; Organs of speech : the respiratory, 3. Edgar Thorpe, Winnings at Interviews, Pearson Education, 2006.
articulatory and phanatory systems.
4. Hari Mohan Prasad, How to prepare for Group Discussions and
2. Sound System of English : Phonetic sound and phonemic sounds, Interviews, Tata McGraw Hill, 2006.
introduction to International Phonetic Alphabet, classification and
description of English phonemic sounds; minimal pairs; The syllable 5. J. Sethi et al, A Practical Course in English Pronunciation (with
: types of syllables; Consonant clusters. CD), Prentice Hall India, 2005.
3. Aspects of connected speech : strong forms, weak forms, contracted

.C
forms, elision.
4. Word Stress : Primary stress, secondary stress, functional stress,
rules of word stress.
5. Rhythm anbd Intonation : Introduction to rhythm and intonation ;
Major patterns of intonation in English with their semantic
implications.
6. Presentation Skills : Making effective presentations, expressions
.J
which can be used in presentations, use of non-verbal
communication, coping with stage fright, handling question and
answer session; Use of audio-visual aids, Power Point Presentations.
7. Interview Skills : Planning anbd Preparing for interviews, facing
interviews confidently, use of suitable expressions during interviews.
M
8. Group Discussions : Objectives of a GD; Types of GDs; Initiating,
continuing and concluding a GD.
9. Debate : Differences between a debate and a group discussions,
essentials of a debate, conducting a debate.

35 36