Scribd
Upload
80 views2 pages

Question Bank ILE-1

This document contains a question bank for the Introduction to Electrical Engineering course module on basic electrical components. It includes multiple choice and short answer questions about resistors, capacitors, transformers, and inductors. Questions ask about identifying component values from color codes, specifications of different components, and basic workings of transformers, capacitors, and inductors. Longer questions require explanations of the construction and workings of resistors, capacitors, transformers, and relays.

Uploaded by

Meera S Nair
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
80 views2 pages

Question Bank ILE-1

This document contains a question bank for the Introduction to Electrical Engineering course module on basic electrical components. It includes multiple choice and short answer questions about resistors, capacitors, transformers, and inductors. Questions ask about identifying component values from color codes, specifications of different components, and basic workings of transformers, capacitors, and inductors. Longer questions require explanations of the construction and workings of resistors, capacitors, transformers, and relays.

Uploaded by

Meera S Nair
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Question Bank

BE101-04 Introduction to Electrical Engineering

MODULE-I
PART A (2 marks)
1. Colour band sequence on a resistor is Yellow, Violet, Silver and Red. What is it’s
resistance value?
2. What is the working principal of a transformer?
3. A number 104 is written on the body of a ceramic capacitor. What is the value of
capacitance?
4. Find out the maximum current rating of a 10k ohm and 0.5 W resistor.
5. In a particular circuit a resistor is marked with colours Grey, Red, Black and Gold
respectively and a ceramic capacitor with marking 224. Identify the value of resistance
and capacitance.
6. What is the main difference between a trimmer and Gang capacitor?
7. Why is it necessary to connect an electrolytic capacitor in a capacitor with correct
polarity?
8. Write the colour code of 100ohm resistor with tolerance ±5%.
9. What are the specifications of a transformer?
10. The sequence of colour band in a resistor are : Green blue Yellow and Sliver. What is its
resistance value? Write the colour code of 100ohm resistor with 5% tolerance.
11. Write the expression for capacitive reactance. Explain how capacitive reactance varies
with frequency.
12. List any four circuits where you can find inductors.
13. What are the specifications of capacitors?
14. Write the colour coding of 47MΏ with 10% tolerance.
15. Draw the structure of carbon composition resistors.

PART B
16. Differentiate the capacitor based on the types of dielectric used and explain their
construction. (10)
17. Explain the construction details of carbon composition resistors. (5)
18. Discuss the working & various parameters of Relays with relevant sketches. (5)
19. Explain the constructional features of a metal film resistor. (5)
20. Describe the construction of a commercial electrolytic capacitor. (5)
21. Explain the structure of any three types of fixed resistors. Mention its advantages and
disadvantages.
22. Write brief description about the constructional details of wire wound resistor. (4)
23. How can you reduce the inductive effect in wire wound resistors? (2)
24. What are the advantages and disadvantages of solid state relays over mechanical relays?
(4)
25. Explain the working principal of Mica & Electrolytic capacitor. (10)
26. Write notes on
(a) relays.
(b) Type numbering of transistors. (10)
27. Explain the constructional details of carbon composition resistors. Mention its features.
(5)
28.

29.

You might also like