Scribd
Upload
110 views6 pages

WiFiSocket Manual en

The document provides instructions for configuring and using an ESP8266 WiFi module integrated into a power socket to control an electrical load remotely over WiFi. Key details include: 1) The socket connects to the SUPLA cloud platform for remote access and control via a mobile app. 2) It enters an access point mode for initial configuration by connecting a computer and accessing a web interface to enter WiFi credentials and SUPLA server settings. 3) Once configured, the socket's status is indicated by an LED and it can be remotely turned on/off through the SUPLA mobile app after connecting to the user's SUPLA cloud account.

Uploaded by

arosad1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views6 pages

WiFiSocket Manual en

The document provides instructions for configuring and using an ESP8266 WiFi module integrated into a power socket to control an electrical load remotely over WiFi. Key details include: 1) The socket connects to the SUPLA cloud platform for remote access and control via a mobile app. 2) It enters an access point mode for initial configuration by connecting a computer and accessing a web interface to enter WiFi credentials and SUPLA server settings. 3) Once configured, the socket's status is indicated by an LED and it can be remotely turned on/off through the SUPLA mobile app after connecting to the user's SUPLA cloud account.

Uploaded by

arosad1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ESP8266 SUPLA SOCKET

www.supla.org

1
Table of contents
General information...................................................................................................................... 3
Legend ......................................................................................................................................... 3
Configuration and start-up............................................................................................................. 4
Important..................................................................................................................................... 4
Starting Client Application on your smartphone .............................................................................. 4
Schematics ................................................................................................................................... 5

2
General information
Power supply 220V AC
Maximum load 3500W
16A time-lag fuse
WiFi ESP8266 module working in 802.11 b/g/n standard and in 2.4Ghz frequency
Communication ports: TCP 2015,2016
Default configuration of network interface through DHCP
Homepage: https://www.supla.org
Support: https://forum.supla.orgSources: https://github.com/SUPLA
License: GPLv2

Legend
D1) Diode indicating the relay has been activated (output power supply)
D2) Tricolored status diode
- Red: the socket does not have WiFi connection or no IP address has been obtained
- Flashing Blue: the socket is working in configuration mode
- Steady burn Blue: the socket has obtained WiFi connection and an IP address
- Green: the socket has obtained WiFi and server connection enabling user
communication

P1) Microswitch to manually avtivate the relay (manual output power supply) but also to
bring the device into configuration mode. Press the microswitch once to have the outout
power on or off. Press and hold it for more than 5 sec. to bring the socket into configuration
mode.

3
Configuration and start-up
The setting are checked right away, when the device is plugged in to power supply. The
device is brought to the configuration mode automatically, if no settings have been entered.
This is indicated with the “D2” diode flashing in blue. To bring the device into configuration
mode manually, press and hold “P1” button for at least 5 sec. When in configuration mode,
the device goes into Access Point mode.

In order to enter or change the settings, you need to:


- Sign in at https://cloud.supla.org (registration is free of charge)
- Connect to WiFi called „SUPLA-ESP8266” from any computer with a wireless network card
and Internet browser.
- Open access page: http://192.168.4.1
- Enter user name and password to the WiFi through which the device will get Internet
access.
- Enter Server address, Location ID and Location Password, which will be provided once you
sign in at cloud.supla.org

- Click „Save”
- Disconnect the socket and plug it in back again

Important
- To work property the device must have Internet access and must be connected to SUPLA-
CLOUD communication server.
- No access passwords are displayed after having the settings saved, in order to prevent
seeing them by an unauthorized person.
- „Data saved!” is displayed when the settings are saved properly.

Starting Client Application on your smartphone


- Install „SUPLA” – you can get it from AppStore, Google Play or Windows Phone
- Start the application
- Sign in at cloud.supla.org
- Enter the settings provided on the startup screen (cloud.supla.org)

4
Schematics

5
6

You might also like