Finishing Faults

Finishing Faults/Defects | Different Types of Textile Finishing
Faults/Defects with Their Causes

http://textilelearner.blogspot.com/2012/08/finishing-faultsdefects-different-types.html
Fabric Finishing:
A series of processing operations applied to gray fabrics to enhance their appearance and hand,
properties and possible applications.
 Play a fundamental role for the commercial excellence of the results of textiles.
 The most simple form of finishing is the ironing or pressing on the fabric.
 In finishing , the fabric is subjected to mechanical and chemical treatment in which its
quality and appearance are improved and its commercial value enhanced.
 Physical finishing techniques (dry finishing processes) or chemical finishing methods (wet
finishing) are used.
Finishing defects
Functional finish: Wear ability, Hand, Mechanical resistance, Easy care, Wet ability, Wash
ability, Deformability, Anti bacterial, Anti fungal, Soil-proof and Fire-proof ability.
Aesthetic finishes: Aesthetic looks
Finishing Defects:
The defects which are occurred in finishing process are enlisted below:
1. Unwanted marks on fabric
2. Decolorized patch on fabric
3. Pin holes
4. Sanforize Pucker
5. Bowing
6. Pilling
7. Water Spots
8. Cuts or Nicks
9. Seam Tears
10. Soil
11. Streaks
12. Inadequate Pressing
13. Pressing Producing Shine on Fabric
14. Loose Threads
15. Askewed or Bias
16. Folding Defects
Unwanted marks on fabric:
Oily stains with dust adhered to surface which makes the stains more prominent and difficult to
remove, due to contact with oil or grease covered exposed machine parts, careless handling could
be another cause.
Decolorized patch on fabric:

Caused due to
 Chemical spillage on fabric.

 Localized excess bleaching.
 Localized excess enzyme wash.
 Can be result into weakening of the fabric.
Pin holes :
 Holes along selvage caused by pins holding fabric while it processes through stenter frame.
 Major defect if pin holes extend into body of fabric far enough to be visible in the finished
product.
Sanforize Pucker :
 Results from uneven wetting out on sanforize.
 Usually caused by defective spray heads.
 Fabric will appear wavy or puckering when spread on cutting table.
 Difficult to detect during inspection on inspection machine with fabric under roller tension.
Bowing :
 Usually caused by finishing.
 Woven filling yarns lie in an arc across fabric width; in knits the course lines lie an arc
across width of goods.
 Establish standards of acceptance.
 Critical on stripes or patterns; not as critical on solid color fabrics.
Pilling:
 Pilling is a common fabric defect occurring on knitted and woven fabrics.
 In producing a yarn, long fibers tightly-twisted produce a serviceable yarn. When short
stable fibers are mixed into the yarn the result is a yarn that will not hold together. The short
staple fibers will separate from the yarn and curl up in a ball, forming what is referred to as
a pill.
 Pilling is accentuated by the friction of normal wear, washing and routine dry cleaning.
Water Spots :
 Usually caused by wet fabric being allowed to remain too long before drying; color migrates
leaving blotchy spots.
Selvage Torn :
 Usually caused by excessive tension while processing through stenter frames.
Cuts or Nicks :
 Caused by indifferent handling of scissors. snips or mechanical trimmers.
Seam Tears :
 Frequently caused by the turning equipment used to reverse garments in finishing.
Soil :
 Caused by oil, grease or dirt. Often times originating from a dirty work area or machinery
not properly cleaned
Streaks :
 Markings caused by some types of turn boards or defectively finished trimming.
Inadequate Pressing :
 Caused by excessive heat or pressure resulting in poor pleating, fullness or twisting of a
seam on garment surface.
Pressing Producing Shine on Fabric:
 Usually caused by excessive heat or incorrect type of pressing surface.
Loose Threads :
 Loose threads will get wound on guide rollers forming ridgesin the processing machines and
cause creases at these places.
 Also loose threads can cause problems of Dye /Print transfer in a padding / Printing
application
Askewed or Bias :
 Condition where filling yarns are not square with wrap yarns on woven fabrics or where
courses are not square with wale lines on knits.
Folding Defects :
 Garment not Folded to Specifications
 Garment not Folded with proper Materials:
 Cardboard, tissue or other specified packaging materials omitted
 Garments not Buttoned, Flys not
 Closed, Incorrect Number of Pins

Finishing Faults

Uploaded by

Copyright:

Available Formats

Finishing Faults

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Finishing Faults

Uploaded by

Copyright:

Available Formats

Finishing Faults/Defects | Different Types of Textile Finishing

Faults/Defects with Their Causes

Aesthetic finishes: Aesthetic looks

Decolorized patch on fabric:

 Chemical spillage on fabric.

You might also like