Ips Led Monitor: Owner'S Manual

ENGLISH
OWNER’S MANUAL
IPS LED MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED MONITOR MODEL

22MP55HQ
23MP55HQ
24MP55HQ
27MP55HQ
www.lg.com
Downloaded from www.Manualslib.com manuals search engine

2 TABLE OF CONTENTS
CONTENTS
ENGLISH
ENG
3 ASSEMBLING AND PREPAR- 24 TROUBLESHOOTING

ING
3 Unpacking
4 Parts and buttons
26 SPECIFICATIONS
5 Moving and Lifting the Monitor 26 22MP55HQ
6 Setting up the Monitor set 27 23MP55HQ
6 - Attaching the Stand Base 28 24MP55HQ
7 - Detaching the Stand Base 29 27MP55HQ
8 - Mounting on a table 30 Preset Modes (Resolution)
8 - Using the cable holder 30 Indicator
10 - Mounting on a wall
31 PROPER POSTURE
11 USING THE MONITOR SET 31 Proper posture for using the Monitor set.
11 Connecting to a PC
11 - D-SUB connection
11 - HDMI connection
12 Connecting to AV Devices
12 - HDMI connection
13 CUSTOMIZING SETTINGS
14 Customizing Settings
14 - Menu Settings
15 - Picture
16 - Color
17 - Display
17 - Audio
18 - Others
19 READER Setting
20 FUNC. Setting
20 - SUPER ENERGY SAVING
21 - Picture Mode
22 - SUPER RESOLUTION +
23 - DUAL DISPLAY
23 - DUAL WEB

ASSEMBLING AND PREPARING 3
ASSEMBLING AND PREPARING
ENGLISH
ENG
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD(Owner's Manual) / D-SUB Cable HDMI Cable

Card (This cable is not included in all (This cable is not included in all
countries.) countries.)
or
Power Cord AC-DC Adapter AC-DC Adapter

( Depending on the country ) ( Depending on the country )
Stand Body Stand Body Two Screws Stand Base

(22MP55HQ/ 23MP55HQ
/24MP55HQ)
CAUTION
Do not use any unapproved accessories to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.

4 ASSEMBLING AND PREPARING
Parts and buttons

ENGLISH
ENG
Power Indicator
READER
yyLighting On: Turned on
yyLighting Off: Turned off
(Power Button)
READER
Button (See p.13)
Connection panel (See p.11)

Moving and Lifting the Monitor

When holding the monitor, the screen should
yy
face away from you to prevent it being
ENGLISH
When moving or lifting the monitor, follow these
ENG
instructions to prevent the monitor from being scratched.
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
It is advisable to place the monitor in the

yy
original box or packing material before at-
tempting to move it.
Before moving or lifting the monitor, discon-
yy
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
yy When moving the monitor, avoid any strong
yy
firmly. Do not hold the panel itself. shock or vibrations to the product.
When moving the monitor, keep it upright,
yy
never turn the monitor on its side or tilt it
sideways.
CAUTION
As far as possible, avoid touching the moni-

yy
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.

Setting up the Monitor set 27MP55HQ
1 Attach the Stand Body to the monitor set.

ENGLISH
Attaching the Stand Base

ENG
2 Use two screws to fix the Stand Body and

monitor set.
1 Place the Monitor set with the screen side 3 Attach the Stand Base.
down on a flat and cushioned surface.
4 Tighten the screw to the right .
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
2 22MP55HQ/ 23MP55HQ /24MP55HQ

Stand Body
1 Attach the Stand Body to the monitor set.
2 Attach the Stand Base.
3 Tighten the screw to the right.
Stand Body
Stand Body
Stand Base
Stand Base

Detaching the Stand Base 27MP55HQ
ENGLISH
1 Place the Monitor set with the screen side 1 Turn the screw to the left.
ENG
down on a flat and cushioned surface. 2 Pull out the Stand Base from the Stand Body.
3 Remove two screws and pull out the Stand
Body from the monitor set.
2 22MP55HQ/ 23MP55HQ /24MP55HQ
1 Pull out the Stand Body and Stand Base
from the monitor set.
2 Turn the screw to the left.
3 Pull out the Stand Base.
Stand Body
Stand Body
Stand Base
Stand Base
Stand Body
Stand Body
Stand Base
CAUTION
This illustration depicts the general model of

yy
connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down holding
yy
only the stand base. The product may fall
and get damaged or injure your foot.

Mounting on a table 3 Press (Power) button on the bottom switch

panel to turn the power on.
ENGLISH
1 Lift and tilt the Monitor set into its upright

ENG
position on a table.
Leave a 10 cm (minimum) space from the wall CAUTION
for proper ventilation.
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
10 cm
10 cm
10 cm
10 cm
Using the cable holder
2 Connect the AC-DC Adapter and Power Cord

to a wall outlet.
Cable holder
or

WARNING
27MP55HQ
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
ENGLISH
NOTE
ENG
the following illustration, as may injure your
fingers.
Tilt from +20 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Do not touch or press the screen when

adjusting the angle of the monitor. Front Rear
Using the Kensington security system
The Kensington security system connector is

located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
Do not hold this set like below picture.Monitor system or visit http://www.kensington.com .
screen can detach from stand base and injure
your body. Connect the Kensington security system cable
between the Monitor set and a table.
22MP55HQ/23MP55HQ/24MP55HQ
NOTE
Tilt from +20 to -3 degrees up or down to adjust
the angle of the Monitor set to suit your view.
NOTE
The Kensington security system is optional.

You can obtain it from most electronics stores.
Front Rear

Model
22MP55HQ 24MP55HQ
Mounting on a wall 23MP55HQ 27MP55HQ
For proper ventilation, allow a clearance of 10 cm
ENGLISH
VESA (A x B) 75 x 75 100 x 100

ENG
on each side and from the wall. Detailed Standard screw M4

instructions are available from your dealer, see the Number of screws 4
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
CAUTION
Disconnect the power cord first, and then

yy
move or install the Monitor set. Otherwise
10 cm electric shock may occur.
If you install the Monitor set on a ceiling or
yy
10 cm slanted wall, it may fall and result in severe
10 cm
injury.
Use only an authorized LG wall mount
yy
10 cm
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
yy Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
yy Screw length from outer surface of back
cover should be under 8mm.
If you intend to mount the Monitor set to a wall, Wall mount Pad
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall Back Cover
mounting interface (optional parts), attach it
carefully so it will not drop.
1 Please, Use the screw and wall mount interface Wall mount Pad
in accordance with VESA Standards. Back Cover
Standard screw
2 If you use screw longer than standard, the
monitor might be damaged internally.
3 If you use improper screw, the product might be Max.8mm

damaged and drop from mounted position. In
this case, LG Electronics is not responsible for
it.
NOTE
4 VESA compatible only with respect to screw Use the screws that are listed on the VESA
yy
mounting interface dimensions and mounting standard screw specifications.
screw specifications. The wall mount kit will include an installation
yy
manual and necessary parts.
5 Please use VESA standard as below. The wall mount bracket is optional. You can
yy
784.8 mm (30.9 inch) and under
yy obtain additional accessories from your local
* Wall Mount Pad Thickness : 2.6 mm dealer.
* Screw : Φ 4.0 mm x Pitch 0.7 mm x The length of screws may differ depending
yy
Length 10 mm on the wall mount. Be sure to use the proper
787.4 mm (31.0 inch) and above
yy length.
* Please use VESA standard wall mount pad For more information, refer to the
yy
and screws. instructions supplied with the wall mount.

USING THE MONITOR SET 11
USING THE MONITOR SET
ENGLISH
ENG
Connecting to a PC HDMI connection
Your Monitor set supports Plug & Play*.
yy Transmits the digital video and audio signals from
*Plug & Play: A PC recognizes a connected your PC or A/V to the Monitor set. Connect the PC
device that users connect to a PC and turn or A/V and the Monitor set with the HDMI cable as
on, without device configuration or user shown in the following illustrations.
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
NOTE
If you use HDMI PC, it can cause compatibility

yy
problem.
CAUTION
Connect the signal input cable and
yy
tighten it by turning the screws
clockwise.
Do not press the screen with your
yy
finger for a long time as this may result in
NOTE
temporary distortion on the screen.
Avoid displaying a fixed image on the
yy
When using a D-Sub signal input cable
yy
screen for a long period of time to prevent
connector for Macintosh
image burn. Use a screensaver if possible.
NOTE
When you want to use two PC in our Monitor,

yy
please connect the signal cable(D-SUB/
Mac adapter
yy HDMI) respectively in Monitor set.
For Apple Macintosh use, a separate plug If you turn the Monitor set on while it is cold,
yy
adapter is needed to change the 15 pin
the screen may flicker. This is normal.
high density (3 row) D-SUB VGA connector
Some red, green, or blue spots may appear
yy
on the supplied cable to a 15 pin 2 row
connector. on the screen. This is normal.

12 USING THE MONITOR SET
Connecting to AV Devices Self Image Setting Function

Press the power button on the bottom panel to
ENGLISH
HDMI connection turn the power on. When monitor power is turned
ENG
on, the "Self Image Setting" Function is executed

Transmits the digital video and audio signals from automatically. (Only supported in Analog Mode)
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
NOTE
"Self Image Setting" Function.

yy
NOTE This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
Using a DVI to HDMI cable may cause com-
yy automatically adjusts the display to optimal
patibility issues. settings for individual input signals.(Only
supported in Analog Mode)
‘AUTO’ Function.
yy
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)

CUSTOMIZING SETTINGS 13
CUSTOMIZING SETTINGS
ENGLISH
ENG
1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow ( ) button.
3 Select EXIT to leave the OSD menu.
Monitor set Buttons
Button Description
Accesses the main menus.(See p.14)
OSD Locked/OSD This function allow you to lock the current control settings, so
Unlocked that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds. Then
OSD of “OSD Lock” will appear. After that, user can select
lock or unlock by pressing left/right button.
If user selects the “Lock” icon by pressing the “OK” button,
the message “OSD Locked” will appear. Otherwise, “OSD
Unlocked” will appear. After selecting the “Lock”, If you want
to change to Unlock, you can push the “MENU” button for
several seconds. The message “OSD Unlocked” will appear.
Use this button to enter Reader Mode menu. Its function works to display screen as
paper-like picture for Eye comfort.If you want to more information(See p.19).
Use this button to enter SUPER ENERGY SAVING, Picture Mode, SUPER
RESOLUTION+, DUAL DISPLAY, DUAL WEB menus.(See p.20~23)
When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)
The best display mode 1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/HDMI)
you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
EXIT the OSD(On Screen Display).
(Power Button) Turns the power on or off.
Power Indicator The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode, the power
indicator blinks white.

Customizing Settings
ENGLISH
Menu Settings
ENG
1 Press MENU button on the bottom of the Monitor set

to display the Menu OSD.
2 Set the options by pressing the ◄ or ► or ▼

buttons.
3 Select the "Next Menu" button to enter the more

option settings.

To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.

Menu Analog HDMI Description
Brightness ● ●
To adjust the brightness, contrast of the screen.
Contrast ● ●
Response Time You can set a response time for displayed pictures based on the speed of the
● ● screen. For a normal environment, it is recommended that you use 'Off'. For a
fast-moving picture, it is recommended that you use 'High'.
Wide/Original Wide
Switch to full screen mode according to input image signal.
● ● Original
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9).
Reset ● ● Restore all factory default settings. Press the◄ , ►buttons to reset immediately.
Menu > Next Menu Analog HDMI Description

Picture Sharpness ● ● To adjust the clearness of the screen
Black Level ● To set offset level
Over Scan ● To improve the clarity and stability of the screen
Color Gamma
Color Temp
● ● To customize the color of the screen
Six Color
Color Reset
Display Horizontal
● To adjust the position of the screen
Vertical
Clock
● To improve the clarity and stability of the screen
Phase
Audio Volume ● To adjust the volume
Others Language
● ● To customize the screen status for a user's operating
Power Indicator
environment
Automatic Standby ● ●
Analog: D-SUB(Analog signal) input.

yy
HDMI: HDMI(Digital signal) input.
yy

Picture
ENGLISH
ENG

option settings.
3 Enter to Picture by pressing the ▼ button.

buttons.

Menu > Next Menu > Picture Description

Sharpness To adjust the clearness of the screen.
Black Level You can set the offset level. If you select 'High', the screen will be bright and if
you select ‘Low’, the screen will be dark.(only for HDMI input)
* Offset?As the criteria for video signal, it is the darkest screen the monitor can
show.
Over Scan To select the range of output image for DTV timing in HDMI input.(only for HDMI
input)Recommend overscan function to turn on when connect AV equipment.

Color
ENGLISH

ENG

option settings.
3 Select Color by pressing the ► button.

4 Enter to Color by pressing the ▼ button.
buttons.

Menu > Next Menu > Color Description

Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor,
high gamma values display whitish images and low gamma values display
blackish images.
Color Temp Custom
• Red:Set your own red color levels.
• Green: Set your own green color levels.
• Blue:Set your own blue color levels.
Select the screen color.
Warm: Set the screen to warm color temperature (more red).
Medium: Set the screen to medium color temperature.
Cool: Set the screen to cool color temperature (more blue).
Six Color Sets and stores the hue and saturation for six colors(Red/Green/Blue/Cyan/
Magenta/Yellow) to satisfy the color requirements of a user.
Hue Adjusts the screen hue.
Saturation Adjusts the color sharpness on the screen. Lower values make
the color sharpness weaker and colors lighter while higher
values make the color sharpness stronger and colors dark.
Color Reset Resets the color settings to the factory default settings for the current input
device.

Display
ENGLISH
ENG

option settings.
3 Select Display by pressing the ► button.

4 Enter to Display by pressing the ▼ button.
buttons.

Menu > Next Menu > Display Description

Horizontal To move image left and right.
Vertical To move image up and down.
Clock To minimize any vertical bars or stripes visible on the screen background.The
horizontal screen size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal
noise and clear or sharpen the image of characters.
Audio


option settings.
3 Select Audio by pressing the ► button.

4 Enter to Volume by pressing the ▼ button.
5 Set the options by pressing the ◄ or ► buttons.
Menu > Next Menu > Audio Description

Volume To adjust the Volume of headphone/earphone.(Only for HDMI input)

Others
ENGLISH

ENG

option settings.
3 Select Others by pressing the ► button.

4 Enter to Others by pressing the ▼ button.
buttons.

Menu > Next Menu > Others Description

Language To choose the language in which the control names are displayed.
Power Indicator Use this function to set the power indicator on the bottom side of the monitor to
On or Off.If you set Off, it will go off.
If you set On at any time, the power indicator will automatically be turned on.
Automatic Standby If you do not press any button on the monitor set for a certain period, the monitor
set will automatically switch to standby mode.

READER Setting
ENGLISH
1 Press READER button on the bottom of the Monitor
ENG
set to display the Reader Mode OSD.
2 Set the options by pressssing the ◄ buttons.
Reader Mode Description

Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you
want screen more bright, you can control brightness in Menu OSD.
Reader 2 It is a mode that the screen is adjusted to the best for the cartoon. If you want
screen more bright, you can control brightness in Menu OSD.
Reader Off It is a mode that reader mode is off.
NOTE
If option of Reader Mode is Reader 1 or Reader 2, Picture Mode will automatically be Custom and
Super Energy Saving will automatically be Off.

FUNC. Setting
ENGLISH
SUPER ENERGY SAVING

ENG
1 Press FUNC. button on the bottom of the Monitor set to

display the FUNC. OSD.
2 Enter to SUPER ENERGY SAVING by pressing the ▼

button.
3 Set the options by pressing the ◄ or ► or ▼buttons.

4 Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow
( ) button.
SUPER ENERGY SAVING Description

High Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function.
Low Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function.
Off Disables SUPER ENERGY SAVING.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
yy
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
yy
SAVING DATA(W/h)
yy
546 mm 584 mm 604 mm 685 mm
(21.5 inch) (23 inch) (23.8 inch) (27 inch)
SUPER SAVING(High) 4 W/h 4 W/h 4 W/h 6 W/h
SUPER SAVING(Low) 2 W/h 2 W/h 2 W/h 3 W/h
Saving Data depends on the Panel. So,those values should be different from each panel and panel
yy
vendor.If option of Super Energy Saving is High or Low, monitor luminance become higher or lower
depend on source.
LG calculated these values by using “broadcast video signal”
yy
(including broadcast video: IEC 62087)
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
yy
function.
If option of Super Energy Saving is High or Low, Picture Mode will automatically be Custom and
yy
Reader Mode will automatically be Reader Off.

ENGLISH
ENG
Picture Mode
1 Press FUNC. button on the bottom of the Monitor set

to display the FUNC. OSD.
2 Select Picture Mode by pressing the ► button.

3 Enter to Picture Mode by pressing the ▼ button.
upper menu or set other menu items, use the up
arrow ( ) button.
Picture Mode Description

Custom It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.
Text It is a mode that the screen is adjusted to the best for the textworks.
Photo It is a mode that the screen is adjusted to the best to view pictures.
Cinema It is a mode that the screen is adjusted to the best to view the videos.
Game It is a mode that the screen is adjusted to the best to play a game.
Picture Mode Description

Custom It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.
Vivid 1 Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour,
Vivid 2 and sharpness.
Standard Adjusts the image for the normal environment.

Cinema It is a mode that the screen is adjusted to the best to view the videos.
NOTE
If option of Picture Mode is non-Custom , Reader Mode will automatically be Reader Off and Super
Energy Saving will automatically be Off.

SUPER RESOLUTION +
ENGLISH

ENG
2 Select SUPER RESOLUTION+ by pressing the ►

button.
3 Enter to SUPER RESOLUTION+ by pressing the ▼

button.

arrow ( ) button.
SUPER Description
RESOLUTION+
Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
Low The optimized picture quality is displayed when a user wants smooth and natural images. It
iseffective for slow-moving pictures or still images.
Middle The optimized picture quality is displayed when a user wants images between low and
highmodes for comfortable viewing. It is effective for UCC or SD video.
High Optimized picture quality is displayed when a user wants crystal clear images. It is effective
forhigh quality video or game.

* Before using below functions, please install DUAL SMART SOLUTION programme.
DUAL DISPLAY
ENGLISH
ENG
2 Select DUAL DISPLAY by pressing the ► button.

3 Enter to DUAL DISPLAY by pressing the ▼ button.
arrow ( ) button.

DUAL DISPLAY Description
Clone By selecting Clone,user can use secondary monitor as done mode of primary monitor.
Extended By selecting Extended,user can use secondary monitor as extended mode of primary
monitor.
Off If select Off,DUAL DISPLAY is off.
* Before using below functions, please install DUAL SMART SOLUTION programme.
DUAL WEB
2 Select DUAL WEB by pressing the ► button.

3 Enter to DUAL WEB by pressing the ▼ button.
arrow ( ) button.

DUAL WEB Description
On Help user to browse web efficiently by dividing in half. Help to arrange and move
windowson screen. Help user to control dividedwindows ratio.
Off If select Off,DUAL WEB is off.
NOTE
When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD
yy
appear and user should press dual button -> User can bring back to normal mode.

24 TROUBLESHOOTING
TROUBLESHOOTING
ENGLISH
ENG
Check the following before calling for service.

No image appears
Is the power cord of the display yy Check and see if the power cord is connected properly to the power
connected? outlet.
Is the power indicator light on? yy Press the Power button.
Is the power on and the power yy Adjust the brightness and the contrast.
indicator White?
Is the power indicator flickering? yy If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yy Try to turn on the PC.
Do you see an "OUT OF RANGE" yy This message appears when the signal from the PC (video card) is
message on the screen? out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
Do you see a "NO SIGNAL" yy When the monitor is on "No-Signal" in 5 minutes, the monitor goes to
message on the screen? DPM mode.
Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD LOCKED” when yy You can secure the current control settings, so that they cannot be
you push MENU button? inadvertently changed. You can unlock the OSD controls at any time
by pushing the MENU button for several seconds: the message “OSD
UNLOCKED” will appear.
Display image is incorrect

Display Position is incorrect. yy Press the AUTO button to automatically adjust your display image to
the ideal setting.
On the screen background, vertical yy Press the AUTO button to automatically adjust your display image to
bars or stripes are visible. the ideal setting.
Any horizontal noise appearing in yy Press the AUTO button to automatically adjust your display image to
any image or characters are not the ideal setting.
clearly portrayed.
yy Check Control Panel ► Display ► Settings and adjust the display
to the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).

TROUBLESHOOTING 25
CAUTION
ENGLISH
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
ENG
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect

The screen color is mono or yy Check if the signal cable is properly connected and use a screwdriver
abnormal. to fasten if necessary.
y Make sure the video card is properly inserted in the slot.
y
yy Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display yy Be sure to install the display driver from the display driver CD (or
driver? diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.

Did you select the recommended yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may
resolution? be flickering. Change the resolution to the recommended resolution
1080P.

26 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
22MP55HQ
ENG
Display Screen Type 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
Visible diagonal size: 54.6 cm
Pixel Pitch 0.08265*RGB(H) mm x 0.24795(V) mm
Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56Hz to 75Hz (D-SUB)
56Hz to 61Hz (HDMI)
Input Form Separate Sync. Digital
Video Input Signal Input 15 pin D-SUB Connector
HDMI Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz
HDMI (Digital) : 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Plug & Play DDC 2B(Analog,HDMI)
Power On Mode : 20 W(ENERGY STAR® standard)*
Consumption Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input 19 V 1.3 A
AC-DC Adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd
OUTPUT: 19 V 1.3 A
Dimensions With Stand 50.8 cm x 42.0 cm x 18.8 cm
(Width x Height x Without Stand
Depth) 50.8 cm x 31.2 cm x 5.5 cm
Weight 2.8 kg
Tilt Range -3° to 20°
Environmental Operating Temperature 10°C to 35 °C
conditions Operating Humidity 10 % to 80 %
Storage Temperature -20°C to 60 °C
Storage Humidity 5 % to 90 % non-Condensing
Stand Base Attached ( ), Detached (O)
Power cord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.

SPECIFICATIONS 27
SPECIFICATIONS
ENGLISH
23MP55HQ
ENG
Display Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch)
56Hz to 61Hz (HDMI)
HDMI Connector
HDMI (Digital) : 1920 x 1080 @ 60 Hz
Off Mode ≤ 0.3 W
or Type ADS-40FSG-19 19025GPB-2, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202B, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202C, manufactured by LG Innotek Co.,Ltd
or Type PSAB-L202D, manufactured by LG Innotek Co.,Ltd
OUTPUT: 19 V 1.3 A
(Width x Height x
Depth) Without Stand 54.4 cm x 33.2 cm x 5.5 cm
Weight 3.1 kg
functions.

28 SPECIFICATIONS
SPECIFICATIONS
ENGLISH
24MP55HQ
ENG
Display Screen Type 60.4 cm (23.8 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
56Hz to 61Hz (HDMI)
HDMI Connector
HDMI (Digital) : 1920 x 1080 @ 60 Hz
Off Mode ≤ 0.3 W
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V 1.7 A
(Width x Height x
Weight 3.3 kg
functions.

SPECIFICATIONS 29
SPECIFICATIONS
ENGLISH
27MP55HQ
ENG
Display Screen Type 68.5 cm (27 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
56Hz to 61Hz (HDMI)
HDMI Connector
HDMI (Digital) : 1920 x 1080 @ 60 Hz
Off Mode ≤ 0.3 W
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT: 19 V 1.7 A
(Width x Height x
Weight 4.7 kg
functions.

30 SPECIFICATIONS
Preset Modes (Resolution)

ENGLISH
22MP55HQ,23MP55HQ,24MP55HQ,27MP55HQ
ENG
Horizontal Vertical
Display Modes (Resolution) Polarity(H/V)
Frequency(kHz) Frequency(Hz)
720 x 400 31.468 70 -/+
640 x 480 31.469 60 -/-
640 x 480 37.500 75 -/-
800 x 600 37.879 60 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60 +/+
1280 x 1024 79.976 75 +/+
1680 x 1050 65.290 60 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
HDMI Timing
Factory support mode Horizontal Vertical

HDMI
(Preset Mode) Frequency(kHz) Frequency(Hz)
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080i 28.12 50 O
1080i 33.75 60 O
1080P 56.25 50 O
O
1080P 67.50 60
Recommend Mode
Indicator
Mode LED Color
On Mode White
Sleep Mode Blinking White
Off Mode Off

PROPER POSTURE 31
PROPER POSTURE
ENGLISH
ENG
Proper posture for using the Monitor set.
Adjust the
Monitor set and Adjust the location of the
your posture to Monitor set to avoid it
allow you to view reflecting light.
images at the
optimal viewing
angle.
Place your hands

gently on the
keyboard, keeping
your arms bent at
the elbows and
horizontally outright.

Declaration of Conformity
Trade Name: LG
Model : 22MP55HA
23MP55HA
24MP55HA
27MP55HA
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before

using the product.
Keep the Owner’s Manual (CD) in an accessible
ENERGY STAR is a set of power-saving
place for future reference.
guidelines issued by the U.S.Environmental
The model and serial number of the SET is
Protection Agency(EPA).
located on the back and one side of the SET.
Record it below should you ever need service. As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this
MODEL product meets the ENERGY STAR
guidelines for energy efficiency.
SERIAL

Ips Led Monitor: Owner'S Manual

Uploaded by

Copyright:

Available Formats

Ips Led Monitor: Owner'S Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ips Led Monitor: Owner'S Manual

Uploaded by

Copyright:

Available Formats

ENGLISH

IPS LED MONITOR MODEL

Downloaded from www.Manualslib.com manuals search engine

3 ASSEMBLING AND PREPAR- 24 TROUBLESHOOTING

Downloaded from www.Manualslib.com manuals search engine

ASSEMBLING AND PREPARING

CD(Owner's Manual) / D-SUB Cable HDMI Cable

Power Cord AC-DC Adapter AC-DC Adapter

Stand Body Stand Body Two Screws Stand Base

Downloaded from www.Manualslib.com manuals search engine

Parts and buttons

Button (See p.13)

Connection panel (See p.11)

Downloaded from www.Manualslib.com manuals search engine

Moving and Lifting the Monitor

It is advisable to place the monitor in the

As far as possible, avoid touching the moni-

Downloaded from www.Manualslib.com manuals search engine

Setting up the Monitor set 27MP55HQ

1 Attach the Stand Body to the monitor set.

Attaching the Stand Base

2 Use two screws to fix the Stand Body and

2 22MP55HQ/ 23MP55HQ /24MP55HQ

Downloaded from www.Manualslib.com manuals search engine

Detaching the Stand Base 27MP55HQ

This illustration depicts the general model of

Downloaded from www.Manualslib.com manuals search engine

Mounting on a table 3 Press (Power) button on the bottom switch

1 Lift and tilt the Monitor set into its upright

2 Connect the AC-DC Adapter and Power Cord

Downloaded from www.Manualslib.com manuals search engine

Do not touch or press the screen when

Using the Kensington security system

The Kensington security system connector is

The Kensington security system is optional.

Downloaded from www.Manualslib.com manuals search engine

VESA (A x B) 75 x 75 100 x 100

on each side and from the wall. Detailed Standard screw M4

Disconnect the power cord first, and then

3 If you use improper screw, the product might be Max.8mm

Downloaded from www.Manualslib.com manuals search engine

USING THE MONITOR SET

If you use HDMI PC, it can cause compatibility

When you want to use two PC in our Monitor,

Downloaded from www.Manualslib.com manuals search engine

Connecting to AV Devices Self Image Setting Function

on, the "Self Image Setting" Function is executed

"Self Image Setting" Function.

Downloaded from www.Manualslib.com manuals search engine

Monitor set Buttons

Downloaded from www.Manualslib.com manuals search engine

1 Press MENU button on the bottom of the Monitor set

2 Set the options by pressing the ◄ or ► or ▼

3 Select the "Next Menu" button to enter the more

4 Select EXIT to leave the OSD menu.

Each option is explained below.

Menu > Next Menu Analog HDMI Description

Analog: D-SUB(Analog signal) input.

Downloaded from www.Manualslib.com manuals search engine