Single-storey industrial buildings

Florea Dinu
Lecture 9: 21/02/2014
European Erasmus Mundus Master Course

Sustainable Constructions
under Natural Hazards and Catastrophic Events
520121-1-2011-1-CZ-ERA MUNDUS-EMMC
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events Content
• Configurations, roof structure,
roof bracings.
• Roof structure: decking, purlins,
rafters.
• Column base plates, vertical
bracing of longitudinal walls and
gables, wall elements (cladding,
posts, columns, rails, cassettes,
bracings).
• Classification (second order
effects) of structures
• Frames, detailing, space
behaviour of halls.
• Design of crane runway beams.
L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 2
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events
Part I – Industrial buildings

Configurations, roof structure, roof bracings

Function protection against climatic effects

arrangement of operation = traffic tracks

Categories of halls:
• Standard ⊕ low cost (budget price)
⊕ fast available - provided from stock
Θ lack of flexibility (difficult to adapt)
Θ light cranes only (if any…)
• Purpose-made ... suitable for given production, use
(e.g. heavy cranes, lightening, ventilation ...)

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Warehouse
Production Comercial

Sport

Agriculture, farm

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings www.lindab.com 4
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events
Part I – Industrial buildings
Terminology
one-bay two-bay more-bay
(longitudinal and transverse bays)

Crane
overlap

frame
spacing ℓ

bay span L
L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 5
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Terminology of cross section with roof truss

alt. 1 alt. 2
Hot rolled purlins and rails Thin-walled purlins and cassettes

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 6
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Example of a two-bay frame industrial hall

by courtesy of
Dowling – Knowles –Owens:
L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings Structural Steel Design 1988 7
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Cross-section of halls (i.e. common frames and gables)

1. Cross sections (with hinged supported rafter/truss, hinged/fixed base)
in roof support by bracing is
necessary (transfer to gables)

2. Frames

Pitched portal frames:

two-hinged, three-hinged, built-in, combinations

⊕ small basements,
⊕ aesthetical structure,
• sensitive to settling of supports and
temperature effects
• at crane halls: crane vibrations up to roof
L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 8
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

3. Gables
common frame with additional framing
Solution
• hall may easily be extended
gable wall
• the frame is heavy, expensive

gable bearing wall: gable posts + rails

+ rafter + bracings

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 9
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Longitudinal direction of halls

Dilatation segments:

The temperature effect on bearing behaviour

may be neglected for this arrangement
L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 10
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Roof bracings (bracings in the space of roof trusses)

1. transversal bracings (always, transfers wind from gables to wall vertical bracings)
2. longitudinal bracings (occasionally, but always suitable for keeping geometry)
3. vertical roof bracings (securing verticality of trusses, not used for portal frames)

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 11
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Roof structure: decking, purlins, rafters

Roof decking
Unvented
• single-layer roofs
Vented
(common, suitable for relative humidity < 75 % at 20ºC)
• double-layer roofs (particularly for higher humidity)

Composition

• roofing (determines roof slope, sometimes self-supporting)

• waterproof coating (0-18%): asphalt strips, foil strips, seamless coating …,
• or cladding: formerly corrugated sheeting and eternit (18 %), nowadays thin-
walled sheeting (min. 10 %, jointless 5 %).
• complementary layers
• insulation, roof underlay, steam-proof, microventing etc.,
• bearing layer
• usually steel sheeting (also as a sandwich part), silicate panels,
• formerly also corrugated sheeting, eternit, timber formwork etc.
• presently usually fabricated sandwiches of various fabricators.

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 12
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Bearing layer
1) Trapezoidal sheeting economic spans L = 1 ÷ 3 m (up to 6 m)
•
usually galvanized 275 g/m2.
•
superior with additional coating of polyester 15-25 μm,
•
perfect protection PVDF 25 μm,
•
or also protection against mechanical damage: PVC 200 μm.
fixing to purlins: - self-tapping screws
- cartridge fired pins

sidelap connection between sheeting: - blind rivets max. at

- special bolts for sheeting 500 mm
(welding inadmissible due to corrosion; possible if embeded in concrete only)

Typical arrangements:
• without insulation

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 13
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

• insulated
- cladding from thin-walled sheeting (steel, aluminium, stainless steel)
breaking of thermal bridge
(self-adhesive tape 30x8 mm)

distance profile or (blind rivet connections)

- with waterproof coating

roof with purlins roof without purlins

- Sandwich panels

many types, e.g.

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 14
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

2) Silicate slabs
• reinforced/prestressed concrete slabs (L ≈ 3 m) or panels (L ≈ 6 m),
• reinforced light concrete slabs (cellular concrete, liapor - keramzite, etc).

3) Corrugated sheeting, eternit, others

3) Translucent panels
• polycarbonate plates planar, corrugated, lenses, skylights,
• glass in grid structure.

Purlins - support cladding or decking

position of purlins:

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 15
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Survey of purlins and usual application:

statically structure suitable span common

simple girder thin-walled Z, C, zeta, sigma 6m -

hot-rolled IPE 6m -
lattice ≥ 12 m yes
castellated ≥9m -
continuous girder thin-walled Z, C, zeta, sigma 6÷8m yes
hot-rolled IPE 6÷8m yes
hinged (Gerber’s) hot-rolled IPE 6÷9m -
girder
propped and hot-rolled IPE, thin-walled 9 ÷12 m -
suspended
Loading: Checks:

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 16
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Hot-rolled purlin
Generally loaded in bi-axial bending and torsion (giving σ, τ)

For bending, the verification can be done using:

Roof cladding/decking however has great bending stiffness:

Therefore, usual assumption is:

χLT = 1 no lateral-torsional instability occurs,
B=0 no torsion occurs (but attention at steep slopes!!).
According to the roof cladding/decking plate stiffness, the roofs are:

• non-rigid (deflection as in the picture),

• rigid (deflection in the roof slope direction is negligible).

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings
17
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

a) Non-rigid roofs
• assembly stages of rigid roofs, great slopes of roofs,
• trapezoidal sheeting not sufficiently connected in sidelaps and to purlins,
• non-rigid bearing layer (translucent soft panels, fragile eternit, etc.).

Biaxial bending arises due to deflection (My, Mz).

E.g. for intermediate purlin, small shear, Class 2 of cross-section:

b) Rigid roofs
•
silicate roofs after imbedding,
•
trapezoidal sheeting: - with sidelap connection at ≤ 500 mm,
- connected to purlins at ≤ 300 mm.
Due to deflection arises only bending about y (My).
E.g. similarly as above:
Class 2 cross-section: My,Ed ≤ Mc,Rd =Wplfy / γ M0

Class 4 cross-section: My,Ed ≤ Mc,Rd =Wefffy / γ M0

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 18
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Loading in slope direction (qz) of rigid roofs is transferred by roof plate to:
a. eaves purlin,
b. eaves bracing,
c. connection at apex (namely in thin-walled purlins),
d. connection of roof plate to rafters (particularly in roofs without purlins).

a) Eaves purlin (loaded from smaller loading width in comparison to intermediate purlin)

transfers loading qz from the roof apex to eaves

(⇒ loaded in bi-axial bending)

b) Eaves bracing (suitable for greater roof width)

⇒ the purlin profiles usually

as for intermediate purlins

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 19
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Ties for reduction of moment Mz in non-rigid roofs:

thin walled
latch lock

Note: in non-rigid roofs, the eaves purlin is loaded as intermediate purlins, but with smaller
loading width.

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 20
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Purlin to rafter connection (standardized dimensions in tables):

Apex purlin:

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 21
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Thin-walled cold-formed purlins

Profiles according to fabricators:

!!!

Design: Example: Support for continuous

cold-formed Z-shaped purlin
• Class 4 cross sections (EN 1993-1-3),
• exceptionally according to test results, incl. plasticity.
Resistances / admissible loadings commonly available in tables.
Systems:
1. Staggered purlins running continuously 2. System with sleeves
over two spans

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 22
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Example
www.dimond.co.nz

All lap lengths are

to be a minimum
of 0.1 of the
maximum span,
measured from
bolt centre to bolt
centre each end of
the lap, positioned
equally each side
of the portal rafter.

L = Span length

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 23
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Example
www.Lindab.com

Overlapped + additional profile in 1st and last span

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 24
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Continuous hot-rolled purlin over 2 spans

When Class 1 cross section, plastic global analysis is available
(redistribution of moments using kinematic mechanism).

Check for rigid roofs:

Continuous purlins are usually staggered to ensure the same loading of main
frames. The reactions are: 0,375 qL + 1,25 qL + 0,375 qL
Advantages:
• redistributed moments are 31% lower,
• deflections are approx. 40 % lower.

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 25
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Hinged purlins (Gerber’s girder)

Pins are usually in staggered spans (suitable for assembly).

Choice of pin location (c) depends on whether ULS or SLS decides:

Detail of hinge:
(in acc. to roof slope)

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 26
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Lattice purlins (joists)

• parallel chords

• parabolic bottom chord

Light girders without gusset plates, fabricated in production lines

Height h ~ L/15 up to L/20.
Critical length of diagonals lcr ~ l between chords.

Plan

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 27
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Propped and suspended purlins

(The system also provides for

the stability of the framework)

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 28
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Roof rafters/main frames

Support purlins or directly roof cladding (in purlin-less roofs).
Plate girders
a) simple beams,
b) frame rafters (usually)
Structure:
• Hot-rolled I profiles
• Castellated beams
• Welded plates
• Girders with predeformed webs:

Longitudinal shape of simple girders:

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 29
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Roof trusses
Types:

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 30
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Structural details
• shop connections are mostly welded
• site connections bolted (may be also welded).

Site connections: Portal frames

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 31
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Site connections: Latice girder frames

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 32
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

Rafter support on a stanchion:

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 33
 European Erasmus Mundus Master Course

Sustainable Constructions under Natural

Hazards and Catastrophic Events

This lecture was prepared for the 1st Edition of SUSCOS

(2012/14) by Prof. Josef Macháček (CTU) and Michal
Jandera, PhD. (CTU).

Adaptations brought by Florea Dinu, PhD (UPT) for 2nd

Edition of SUSCOS

The SUSCOS powerpoints are covered by copyright and are for the
exclusive use by the SUSCOS teachers in the framework of this Erasmus
Mundus Master. They may be improved by the various teachers
throughout the different editions.

L9 - 2C08
L10 – B.2 – Mechanical properties of cast iron, mild iron and steel at historical structures
 Single storey Industrial buildings 34
 [email protected]

http://steel.fsv.cvut.cz/suscos