0% found this document useful (0 votes)
338 views2 pages

DS MP20 e

The MP 20 is an analogue load cell transmitter that provides high accuracy linearity better than 0.01% of full scale. It has simultaneous analogue outputs of 0-20mA and 0-10VDC and can power up to four 350 ohm load cells. The unit has options for additional units like a dual setpoint unit, 110/230VAC power supply, and a four load cell junction unit. It is IP40 rated, has a operating temperature range of -10 to 40°C, and dimensions of 113mm x 77mm x 37mm.

Uploaded by

krisorn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
338 views2 pages

DS MP20 e

The MP 20 is an analogue load cell transmitter that provides high accuracy linearity better than 0.01% of full scale. It has simultaneous analogue outputs of 0-20mA and 0-10VDC and can power up to four 350 ohm load cells. The unit has options for additional units like a dual setpoint unit, 110/230VAC power supply, and a four load cell junction unit. It is IP40 rated, has a operating temperature range of -10 to 40°C, and dimensions of 113mm x 77mm x 37mm.

Uploaded by

krisorn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MP 20

Analogue Load Cell Transmitter

– Linearity better than 0.01 % of full scale


– Analogue outputs 0/4 to 20 mA and
0 to10 VDC simultaneously usable
– Four load cells of 350 O can be powered
– Active low pass filter from 0.25 Hz to 32 Hz
– Supply voltage 12 - 24 VDC or
110 VAC/230 VAC via MP 20/20
– Zero offset up to +/- 80 % of full scale
– Input signal range up to 3.3 mV/V
– Easy calibration
– Easy mounting by using Phoenix DIN
rail module

Protection class Analogue output Environmental conditions


Housing: IP 40 (DIN 40050) Voltage output (Vout): Temperature range: -10 to +40°C
+/- 10 VDC at min 500 O Dimensions in mm:
Power supply Current loop output (Iout): 113 + 77 + 37 (W + D + H)
12 - 24 VDC +10/-15 % 0/4 - 20 mA at max. 500 O Weight: appr. 0.2 kg
Deviation between Vout and Iout: Warm up time: 30 minutes
Power consumption 3 % of F.S.
3 W max. Optional dual setpoint unit MP 20/10
Accuracy Two FORM-C reed relays
Mounting Linearity: < 0.005 % F.S. at 23°C Up to eight setpoints can be arranged with
Snap on DIN-rail mountable by Temperature effect on zero: < 0.003 %/K four units
Phoenix UMK modul Temperature effect on span: < 0.0015 %/K Relay coil voltage: 12 - 24 VDC
Max. deviation 0 - F.S.: < 50 ppm Relay coil current: < 25 mA
Load cell input Signal filter:
Max. four 350 O load cells active low pass filter in 64 steps Optional power supply unit MP 20/20
Excitation voltage: 2.5 VAC 425 Hz from 0.25 - 32 Hz 110/230 VAC
Excitation current: max. 60 mA Drift 5 min. upon power on:
Input gain range for F.S.: < 20 ppm of F.S. Optional load cell junction unit MP 20/30
0 - 0.17 mV/V up to 0 - 3.3 mV/V up to four 350 O load cells connectable
Dead load compensation:
80 % of max. input
Max. cable length: appr. 150 m
MP 20/10 dual setpoint unit MP 20/20 110/230 VAC power supply MP 20/30 four LC junction unit

Front view Side view


MP 20/00 MP 20…/10…/20…/30… MP 20…/00…/10…/30… MP 20/20

78

113 45 37 37

59

Dimensions in mm

Order information

Type Description Order number


MP 20/00 analogue load cell transmitter 9408 800 20001
MP 20/10 dual set point unit 9408 800 20101
MP 20/20 110/230 VAC power supply unit 9408 800 20201
MP 20/30 four LC connection unit 9408 800 20301

The technical data given here serve only as a product description and must not be interpreted
as guaranteed characteristics in the legal sense.

Sartorius Mechatronics T & H GmbH


Meiendorfer Strasse 205
22145 Hamburg, Germany
Specifications subject to change
without notice. Phone +49.40.67960.303
Printed in Germany.
n/sart · C
Fax +49.40.67960.383
Publication No.: HMP2001-e10101
Order No.: 9498 708 20001 [email protected]
Version 07.2010 www.sartorius-mechatronics.com

You might also like