The document provides requirements for designing mules and internals for pressure vessels. Mules must withstand external pressure and have flanged connections designed according to standards. Openings must be accessible for operation and maintenance, and internals must be supported to withstand loads from thermal and pressure effects while allowing removal through access points. Internals must pass through openings and have welded supports welded with continuous fillet welds. Fasteners must use double nuts and components coated in specified coating.
The document provides requirements for designing mules and internals for pressure vessels. Mules must withstand external pressure and have flanged connections designed according to standards. Openings must be accessible for operation and maintenance, and internals must be supported to withstand loads from thermal and pressure effects while allowing removal through access points. Internals must pass through openings and have welded supports welded with continuous fillet welds. Fasteners must use double nuts and components coated in specified coating.
The document provides requirements for designing mules and internals for pressure vessels. Mules must withstand external pressure and have flanged connections designed according to standards. Openings must be accessible for operation and maintenance, and internals must be supported to withstand loads from thermal and pressure effects while allowing removal through access points. Internals must pass through openings and have welded supports welded with continuous fillet welds. Fasteners must use double nuts and components coated in specified coating.
The document provides requirements for designing mules and internals for pressure vessels. Mules must withstand external pressure and have flanged connections designed according to standards. Openings must be accessible for operation and maintenance, and internals must be supported to withstand loads from thermal and pressure effects while allowing removal through access points. Internals must pass through openings and have welded supports welded with continuous fillet welds. Fasteners must use double nuts and components coated in specified coating.
mules shall be capable of withstanding the external
tor Pressure Vessel" Doc. No. MYA-GEN-ME Criteria for Zetung WHP doc. No NMB-RWP- ewlth connections (Nozzle) shall be designed in accordanc Flanges and Flanged Fittings. opening such as manway. hand holes. instrumentation. valves, etc located Within the accessible range for operation and maintenance. Removal equipment Internals shall be adequately supported and capable of withstanding loads and consistent with induced stresses due to thermal expansion, contraction; variation in flow rate and differential pressure. intem als shall be designed to pass through manholes or designated for the purpose of retrieval. Welded internal supports shall be welded to or head by continuous fillet welds. arnals shall be of double nut configuration. be coated with Aluminium Ceramic Basecoat and Fluorocarbon 2 base and XYLAN top coat).
