1100 Series

1103A-33TG2
Diesel Engine - ElectropaK
55 kWm at 1500 rpm
65 kWm at 1800 rpm

Compact, Efficient Power

! 1100 Series is the result of an intensive period of customer research that has
guided the development of the range.
! The new 3.3 litre cylinder block ensures bore roundness is maintained under the
pressures of operation. It also ensures combustion and mechanical noise is
lowered.
! A new cylinder head has re-established Perkins mastery of air control.

Quality by Design
! Product design and Class A manufacturing improvements enhance product
reliability while maintaining Perkins legendary reputation for durability.

Cost Effective Power

! Compact size and low noise.
Building upon Perkins proven
! Lower fuel consumption and oil use.
reputation within the power generation
! 500 hour service intervals.
industry, the 1100 Series range of
! 2 year warranty.
ElectropaK engines now fit even closer
to customers needs.
Product Support
In the world of power generation ! Total worldwide service is provided through a network of 4,000 distributors and
success is only gained by providing dealers.
more for less. With the 1103A-33TG2 ! TIPSS - The Integrated Parts and Support System enables customers to specify
Perkins has engineered even higher and order parts electronically as well as service engines with on-line guides and
levels of reliability, yet lowered the cost service tools.
of ownership.

1100A units are designed for territories

that do not require compliance to EPA
or EU emissions legislation. These
units are able to meet TA luft
legislation.

Typical Generator Engine Power

Engine speed Type of
Output (Net) Gross Net
rev/min Operation
kVA kWe kW bhp kW bhp
1500 Prime Power 60 48 55 73.8 53.8 72.1
Standby Power 66 52.8 60.5 81.1 59.3 79.5
1800 Prime Power 68.1 54.5 63.3 84.9 61.2 82.1
Standby Power 75.1 60.1 69.6 93.3 67.5 90.5

The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1
Derating may be required for conditions outside these; consult Perkins Engines Company Limited

Generator powers are typical and are based on an average alternator efficiency and a power factor (cos. q) of 0.8
Fuel specification: BS 2869: Part 2 1998 Class A2 or DIN EN 590
Lubricating oil: 15W40 to API CG4

Rating Definitions
Prime power: Variable load. Unlimited hours usage with an average load factor of 80% of the published prime power over each 24 hour period. A 10% overload is available for 1 hour in every 12 hours of operation.
Standby power: Variable load. Limited to 500 hours annual usage, up to 300 hours of which may be continuous running. No overload is permitted.
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No.1782/01/06 Produced in England ©2006 Perkins Engines Company Limited
1100 Series
1103A-33TG2
Standard ElectropaK Specification
1049 mm
634 mm
Air inlet
! Mounted air filter
Fuel system
951
! Rotary type pump mm

! Ecoplus fuel filter

Lubrication system
! Wet sump with filler and dipstick 928 mm

! Spin-on oil filter

Cooling system
! Thermostatically controlled system with gear-driven Fuel Consumption
circulation pump and belt-driven pusher fan 1500 rev/min 1800 rev/min
Engine Speed
! Mounted radiator and piping g/kWh l/hr g/kWh l/hr
Electrical equipment At standby power TBA 15.6 TBA 17.9
! 12 volt starter motor and 12 volt 65 amp alternator with At prime power TBA 14.1 TBA 15.7
DC output
! 12 volt shutdown solenoid energised to run At 75% of prime TBA 10.5 TBA 12.3
power
Flywheel and housing At 50% of prime TBA 7.3 TBA 8.7
! High inertia flywheel to SAE J620 Size 10/111/2 power
! SAE 3 flywheel housing
Mountings
! Front engine mounting bracket
General Data
Number of cylinders 3 vertical in-line
Literature Bore and stroke 105 x 127 mm
! User’s Handbook Displacement 3.3 litres
Aspiration Turbocharged
Optional equipment Cycle 4 stroke
! Woodward electronic governor (LCG2) Combustion system Direct injection
! Workshop manual Compression ratio 17.25:1
! Parts book Rotation Anti-clockwise
viewed from flywheel
Option Groups Cooling system Water-cooled
A selection of optional items is available to enable the Total lubrication system 7.9 litres
customer to prepare a specification precisely matched to the capacity
needs. Total coolant capacity 10.2 litres
Dimensions Length 1049 mm
Width 634 mm
Height 951 mm
Dry weight (approx) 420 kg

Final weight and dimensions will depend on completed specification.

Perkins Engines Company Limited

Peterborough PE1 5NA Distributed by
United Kingdom
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins.com

All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No.1782/01/06 Produced in England ©2005 Perkins Engines Company Limited