Dynamic compaction is a ground improvement technique that densifies soils and fill materials using repeated drops from a heavy steel weight lifted by crane. [1] The vibrations from the drops are transmitted through the ground to compact soils at depth. [2] Dynamic compaction works best with granular, non-organic soils like fills and is used to increase density and bearing capacity while reducing settlements. [3]
Dynamic compaction is a ground improvement technique that densifies soils and fill materials using repeated drops from a heavy steel weight lifted by crane. [1] The vibrations from the drops are transmitted through the ground to compact soils at depth. [2] Dynamic compaction works best with granular, non-organic soils like fills and is used to increase density and bearing capacity while reducing settlements. [3]
Dynamic compaction is a ground improvement technique that densifies soils and fill materials using repeated drops from a heavy steel weight lifted by crane. [1] The vibrations from the drops are transmitted through the ground to compact soils at depth. [2] Dynamic compaction works best with granular, non-organic soils like fills and is used to increase density and bearing capacity while reducing settlements. [3]
Dynamic compaction is a ground improvement technique that densifies soils and fill materials using repeated drops from a heavy steel weight lifted by crane. [1] The vibrations from the drops are transmitted through the ground to compact soils at depth. [2] Dynamic compaction works best with granular, non-organic soils like fills and is used to increase density and bearing capacity while reducing settlements. [3]
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 6
Dynamic compaction of Soil
Dynamic compaction is a ground improvement technique in which a
drop weight is used to densify the soils and fill materials. The drop weight is typically made of steel and is lifted by a crane and repeatedly dropped onto the ground surface. The vibrations that are resulted from the repeated drops, are transmitted below the surface which improve soils at depth. These drop locations are generally located on a grid pattern. The subsurface conditions and foundation loading and geometry determines the spacing of the grid pattern.
Dynamic Compaction of Loose Fill
Dynamic compaction utilizes the dynamic effect of high energy impacts which are caused by the drop weight of steel. These large steel weights weigh 15-40 tonnes which are dropped from a height of 10-30 meters. The actual purpose of this technique is to transmit high energy waves through a compressible soil layer to improve Geo-technical properties of soil at greater depths. Dynamic Compaction is normally associated with an intensive procedure which undergoes in-situ testing to verify that the specified improvement has been achieved.
Arrangement of the large steel weight making an impact
Dynamic Compaction is applicable to all types of granular soils. This
technique is particularly well adapted to the following soils:
non-organic non-homogeneous fill made ground (area of land that is man made by reclamation of marshes, lakes or shorelines reclamation areas with variable characteristics Also where underground obstructions are present Soils with large air voids such as refuse dumps and poorly filled ground. Dynamic Compaction is effective in both saturated and unsaturated soils. Typically this technique should not be carried out within 15m of existing services and 30m from existing buildings. Specially designed 80-120t cranes are used. The site test areas assess the designs after which they are confirmed.
Phasing of dynamic compaction
Spacing between impact points depend on:
Depth of compressible layer
Permeability of soil. Location of ground water level
Deeper layers are compacted at wider grid spacing and upper layers are compacted with closer grid spacing.
Dynamic Compaction Stages:
The immediate effect caused by this technique is of utmost
importance as it results in the immediate reduction in the void ratio which is measured by the settlement after impact. The increase in pore pressure and localized liquefaction in some saturated soils causes a slower phenomenon of improvement of soil. But the pore pressure dissipates during the rest period and results in an improved soil due to the reorganized soil structure.
Ground improvement with time
Advantages of Dynamic compaction:
Compacts large areas of loose granular fills
Reduces the volume of landfill waste Increases in situ density and the voids are collapsed Increased bearing capacity Reduces post-construction settlements
Applications of Dynamic compaction:
Port and Airport Platforms
Heavy Storage Facilities Landfill sites
High Energy Dynamic Compaction:
High Energy Dynamic Compaction
When soils of depths more than 10-12m are to be compacted, High
energy dynamic compaction can be carried out. This type of compaction technique employs an equipment which comprises of free falling drop weights needing a specially designed weight release system using hydraulic clamps to avoid cable damping and friction, plus repeat cycle lifting hooks. When the high energy dynamic compaction is used for treatment of greater depths, the design of work phases is important in order to obtain a homogeneous compaction over the thickness of the soil mass. Remarks:
The concept of Dynamic compaction is simple but experienced engineers
and good planning is essential. Also the thorough understanding of soil strata prior to treatment and maintaining an excellent control program during all phases of the work is required.
