Scribd Logo
Upload

Welcome to Scribd!

  • 246 views

    Gagemaker Tdwin Taper Sample Reports

    Uploaded by

    Rosendo Rizo
    This document is a gage setup report and inspection report for an NCXX pin. It details the machine, operator, inspector and gaging procedures used. It lists the dimensions checked including pitch diameter, thread lead, thread taper, and thread height. Tolerance requirements and serial numbers for the gages used are provided. Dimensions for each pin inspected are recorded along with actual variations and whether each pin is accepted or rejected.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gagemaker Tdwin Taper Sample Reports

    Uploaded by

    Rosendo Rizo
    246 views3 pages
    This document is a gage setup report and inspection report for an NCXX pin. It details the machine, operator, inspector and gaging procedures used. It lists the dimensions checked including pitch diameter, thread lead, thread taper, and thread height. Tolerance requirements and serial numbers for the gages used are provided. Dimensions for each pin inspected are recorded along with actual variations and whether each pin is accepted or rejected.

    Original Description:

    Metrology

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a gage setup report and inspection report for an NCXX pin. It details the machine, operator, inspector and gaging procedures used. It lists the dimensions checked including pitch diameter, thread lead, thread taper, and thread height. Tolerance requirements and serial numbers for the gages used are provided. Dimensions for each pin inspected are recorded along with actual variations and whether each pin is accepted or rejected.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    246 views3 pages

    Gagemaker Tdwin Taper Sample Reports

    Uploaded by

    Rosendo Rizo
    This document is a gage setup report and inspection report for an NCXX pin. It details the machine, operator, inspector and gaging procedures used. It lists the dimensions checked including pitch diameter, thread lead, thread taper, and thread height. Tolerance requirements and serial numbers for the gages used are provided. Dimensions for each pin inspected are recorded along with actual variations and whether each pin is accepted or rejected.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Date: 8/17/2009 1:05:45 PM Machine A:

    Customer: Pipe & Repair Shop Operator A:


    Address 1: Machine B:
    Address 2: Operator B:
    City, State ZIP: New Orleans, LA Inspector(s):
    Contact Name: John Smith Gaging Procedure(s):
    Work Order No.: Quantity Ordered:
    Customer PO: Quantity Completed:
    Drawing No/Rev:
    Description: NCXX Gage Setup Report

    End "A"
    API Conn. No. XX PIN
    SETUP Gage Model Thread Block Frame Taper CPU Tolerance
    No. Rolls/Ball Standard Standard Blocks Value
    Contact
    Pitch Diameter MRP-5501 TR-4238 FSTD-46NC-P TF-2.0RSC 3.9688 -.001/+.002

    S/N

    Ring Gage Standoff

    S/N

    Thread Lead LG-5002 T144 LS-1007 ±.0015

    S/N

    Thread Taper ET-7001 T144 +.0025/-000

    S/N

    Thread Height TH-3000RSC T072 10382-RS +.001/-.003

    S/N

    Bevel Diameter

    Cyl Diameter

    Shoulder Length

    Thread Length

    Tong Length

    Weld Neck Dia.

    O.A.L.

    Profile TP-23-50-JSS

    S/N

    O.D.

    I.D.

    Benchmark

    Notes: This report layout produced by TDWIN Taper


    Setup Inspection Approval: _________________ Date:___________
    Date: 8/17/2009 1:05:45 PM Machine A:
    Customer: Pipe & Repair Shop Operator A:
    Address 1: Machine B:
    Address 2: Operator B:
    City, State ZIP: New Orleans, LA Inspector(s):
    Contact Name: John Smith Gaging Procedure(s):
    Work Order No.: Quantity Ordered:
    Customer PO: Quantity Completed:
    Drawing No/Rev:
    Description: NCXX RSC Pin Inspection Report

    Actual Variation
    API Conn. No. ;; PIN
    Operation Dimension Tolerance No. No. No. No. No. No. No. No. No. No.
    Pitch Diameter -.001/+.002

    Ring Gage Standoff

    Thread Lead LS-1007 ±.0015

    Thread Taper 0.1667 +.0025/-000

    Thread Height 10382-RS +.001/-.003

    Bevel Diameter

    Cyl Diameter

    Shoulder Length

    Thread Length

    Tong Length

    Weld Neck Diameter

    O.A.L.

    Profile

    O.D.

    I.D.

    Upset Diameter

    Heat/Lot No.

    Accept/Reject

    Notes: This report layout produced by TDWIN Taper


    Setup Inspection Approval: _________________ Date:___________

    You might also like