Buildings SoR 2014-15 PDF

GOVERNMENT OF ANDHRA PRADESH
BUILDINGS – SoR: 2014-2015
COMMITTEE OF CHIEF ENGINEERS
1
SCHEDULE OF RATES
FOR
BUILDING WORKS
FOR THE YEAR 2014-2015

st
(Effective from 1 June, 2014)
ALL ENGINEERING
DEPARTMENTS
2
Proceedings – Buildings SoR: 2014-15
Office of the Chief Engineer (R&B) Buildings

Convener-Member,
Committee of Chief Engineers-Buildings-SoR
Procs.No. CEB/TA8/AEE3/B-SoR: 2014-15 Dt: 31-05-2014.
Sub:- Printing of Buildings-SoR for all the Engineering Departments specific to the functioning of Building works –
Buildings-SoR:2014-15 – Communication of Buildings-SoR – Reg.,
Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., dt:20-04-2007.

2. Minutes of Committee of Chief Engineers meetings for finalizing the Building-SoRs held on Dt: 30-05-
2014.
* * * * *
The Government of Andhra Pradesh have constituted a Committee of Chief Engineers of Engineering departments
st
dealing with Building works for finalizing and communicating Buildings-SoR (Civil & Electrical) vide G.O. 1 cited. In
accordance therewith the Committee of Chief Engineers has finalized and approved the Buildings-SoR: 2014-15 in the
Minutes of Meeting held on 30-05-2014.
The rates for the Building items (Civil, Water Supply & Sanitary and Electrical items) are to be followed henceforth
by all the concerned departments for building works. The rates of Labour Rates, Common Material & Work items, Public
Health items, Conveyance Rates of Materials & Hire charges of Common SoR-2014-15 remain unchanged. No other items
other than the items communicated in this Buildings-SoR shall be introduced.
The Heads of Departments mentioned below are authorized to print the Buildings-SoR: 2014-15. The unauthorized
printing & selling of the Buildings-SoR is strictly prohibited.
The revised rates will come into force with immediate effect.
The receipt of the proceedings may please be acknowledged.
Enclosed: Buildings SoR: 2014-15-CD as above

Sri. G. Ramakrishna Kumar
Chief Engineer (R&B) Buildings
Convener-Member,
Committee of Chief Engineers-Buildings-SoR
To
1. Engineer-in-Chief (NH), Roads & Buildings Department, Errummanzil, Hyderabad-82.
2. Engineer-in-Chief (IW)I&CAD, Irrigation Department, Errummanzil, Hyderabad-82.
3. Engineer-in-Chief (State Roads), Roads & Buildings Department, Errummanzil, Hyderabad-82.
4. Engineer-in-Chief (Rural Roads) R&B Department, Errummanzil, Hyderabad-82.
5. Chief Engineer (QC), R&B Department, Errummanzil, Hyderabad-82.
6. Chief Engineer (R&B) (Designs), R&B Department, Errummanzil, Hyderabad-82.
7. Chief Engineer (R&B) (Electrical), R&B Department, Errummanzil, Hyderabad-82
8. Engineer-in-Chief, P.H.. Department, A,C, Guards, Hyderabad-4.
9. Engineer-in-Chief (P.R.), Panchayat Raj Department, Errummanzil, Hyderabad-82.
10. Engineer-in-Chief, Tribal Welfare & Social Welfare Department, DSS Bhavan, Masab tank, Hyderabad.
11. Engineer-in-Chief, Greater Hyderabad Hyderabad Corporation (GHMC), CC Complex,Tankbund Rd., Hyderabad
12. Chief Engineer (AP Housing Board) Gruhakalpa, Nampally, Hyderabad
13. Chief Engineer (Housing Corporation) Urdugally, Himayatnagar, Hyderabad
14. Chief Engineer(APSRTC), RTC ‘X’ Roads, Musheerabad, Hyderabad.
15. Chief Engineer(APMSIDC), IIIrd Floor, DM&HS Campus, Sultanbazar, Koti, Hyderabad.
16. Chief Engineer (AP Police Housing & Welfare Corporation), Lakdi-ka-pool, Hyderabad.
17. Superintending Engineer (R&B), Head Quarters Circle, Khairatabad, Hyderabad
18. Superintending Engineer (R&B), Electrical Circle, Errummanzil, Hyderabad-82.
3
Index to the Buildings SoR: 2014-15
INDEX FOR BUILDINGS SoR: 2014-15
Sl.
DESCRIPTION Page No:
No:
From To
BUILDINGS – SoR:2014-15
1 Index for Building Civil Items 5 5
2 Preamble of Buildings-SoR-2014-15 6 13
3 Building Civil Items - Buildings-SoR-2014-15 14 89
4 List of Approved brands of Building Civil Items 83 83
5 Water Supply & Sanitary Items - Buildings-SoR-2014-15 90 122
6 List of Approved brands of Water Supply & Sanitary Items 122 122
7 Electrical Items – Buildings-SoR-2014-15 123 239
8 Common SoR – 2014-15 240 372
9 Annexure 373 376
4
Index to the Buildings SoR: 2014-15
BUILDINGS SoR: 2014-15

INDEX FOR BUILIDNG CIVIL ITEMS
Sl Pages
SECTION SECTION CODE DESCRIPTION
No from to
1 PREAMBLE 6 13
2 SECTION - A BMT - A 01 to 21 BRICKS & BUILDING BLOCKS 14 15
3 SECTION - B BMT - B 01 to 16 NATURAL FLOORING STONES 15 16
4 SECTION - C BMT - C 01 to 53 WALL & FLOOR TILES 16 18
5 SECTION - D BMT - D 01 to 18 PAVING & INTERLOCKING TILES 18 20
6 SECTION - E BMT - E 01 to 20 TIMBER & ROOFING MATERIALS 20 20
7 SECTION - F BMT - F 01 to 33 MILD, GALVANISED & STAINLESS STEEL 20 22
8 SECTION - G BMT - G 01 to 79 FIXTURES FOR DOORS & WINDOWS 22 25
9 SECTION - H BMT - H 01 to 108 WATER PROOFING CHEMICALS & ADMIXTURES 25 31
10 SECTION - I BMT - I 01 to 21 GLASS 31 31
11 SECTION - J BMT - J 01 to 51 PAINTS & POLISHES 31 32
12 SECTION - K BMT - K 1 to 124 PARTICLE BOARDS 32 35
13 SECTION - L BMT - L 01 to 20 PLYWOOD 35 35
14 SECTION - M BMT - M 01 to 116 CEILINGS, WALL PARTITIONS & WALL LININGS 35 45
15 SECTION - N BMT - N 01 to 88 DOORS 45 60
16 SECTION - P BMT - P 01 to 112 WINDOWS 60 72
17 SECTION - Q BMT - Q 01 to 15 STRUCTURAL GLAZING 72 74
18 SECTION – S BMT - S 01 to 15 DISMANTLING 74 75
19 SECTION - T BMT - T 01 to 05 READY MIX CONCRETE 75 75
20 SECTION - U BMT - U 01 to 11 EXPANSION JOINT FILLERS 75 75
21 SECTION - V BMM - V 01 to 50 LABOUR CHARGES 75 78
22 SECTION - W BMS - W 01 to 80 MISCELLANEOUS ITEMS 78 82

MACHINERY CHARGES, HIRE CHARGES FOR
23 SECTION - X BMC - X 01 to 12 82 82
CENTRING
24 LIST OF APPROVED BRANDS/ NAMES OF APPROVED MANUFACTURERS/ SUPPLIERS 83 83
25 CENTRING & SCAFFOLDING CHARGES 84 89
5
Preamble - Buildings SoR: 2014-15
PREAMBLE
6
1.0 INTRODUCTION
The Government have issued orders vide G.O. Rt. No: 471 TR&B (R-1) Dept., Dt. 20.4.2007
constituting a Committee comprising of Chief Engineers of departments in-charge of execution
of building works for finalization of Standard Schedule of Rates for Buildings (Electrical & Civil).
The 6th meeting of the above “SoR Committee for Buildings (Civil & Electrical)” was convened
on 30-05-2014 with an objective to finalize and release the Buildings-SoR: 2014-15.
2.0 APPLICABILITY OF COMMON SoR – 2014-15
The rates of labour, common materials & work items, Public Health items, conveyance rates of
materials &hire charges approved and published in Common SoR-2014-15 remain applicable.
The specifications, stipulations & all other conditions of Common-SoR other than those
specified in this context remain applicable.
3.0 OVERHEADS & CONTRACTORS PROFIT

a. The provision of ‘Over Heads and Contractor’s Profit @ 14%’ as approved by the BoCE’s in
Common SoR-2014-15 is continued to be applicable for the building works as per the
clarification issued by the Committee of Chief Engineers vide Chief Engineer (R&B)
Buildings Proceedings No: CEB/TA8/AEE3/SSR:2010-11 Dt.03-12-2010.
b. It is reiterated that the provision of ‘Over Heads and Contractor’s Profit’ is applicable to
Building works since the advent of the AP. Revised standard data-2009, which is approved
by the Government in G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dated: 02-03-2009 and
this component shall be operative on all the data items of the estimates and rates of the
finished items published in Buildings SoR for original works subjected to the fulfillment of
the conditions given below:
i. Site accommodation, setting up plant, access road, water supply, electricity and
general site arrangements.
ii. Office furniture, equipment and communications.
iii. Expenditure on:
a) Corporate office of contractor.
7
b) Technical agents for site supervision. (Reimbursement to the technical

agents provision is dispensed with where ‘over heads and contractor’s
profit’ provision is included in the data rates)
c) Documentation and “as built” drawings.
d) Mobilization/ de-mobilization of resources.
e) Labour camps with minimum amenities and transportation to work sites.
f) Light vehicles for site supervision including administrative and managerial
requirements.
g) Laboratory equipment and quality control including field and laboratory
testing. (For all the works costing more than Rs. 2.00 Crores contractors
have to establish Quality Control laboratory)
h) Minor T & P and survey instruments and setting outworks, including
verification of line, dimensions, etc.
i) Watch and ward.
j) Traffic management/ Safety management during construction.
k) Expenditure on safeguarding environment.
iv. Sundries.
v. Financing Expenditure.
vi. Sales/ Turn overtax. (This is a material VAT component only, however the provision
towards Works Contract Value Added Tax at 5% or as applicable on the finished
work items as defined in APVAT Act-2005 shall be added in the estimates)
vii. Work Insurance/ compensation (Reimbursement to the work insurance provision is
dispensed with where ‘over heads and contractor’s profit’ provision is included in
the data rates). Further the Government have dispensed with insuring all works of
I&CAD Department vide G.O. Ms. No: 61 Irrigation & CAD (PW:Reforms)
Department Dt. 25-06-2013, it is decided to insist upon insuring all the building
works as this provision is already inbuilt in the ‘Overheads & Contractor’s Profit’
component being allowed in building works.
4.0 OTHER GUIDELINES
1. Municipal Area Allowance, Agency or Tribal area allowance or any such allowance on the
labour components of civil, water supply & sanitary items of building works shall be
allowed wherever applicable as per the guidelines and preamble of Common SoR: 2014-15.
8
For the building work estimates taken up in the notified Area Development Authorities
constituted by the Government, the Area Allowance on the labour components of civil,
water supply & sanitary items of building works may be allowed on specific
recommendation from such Area Development Authorities.
2. The rates of the Ready Mix Concrete (RMC) are deleted as the rate analysis is appended in
the A.P. Revised Standard Data-2009. Incase RMC concrete is procured from the
manufacturers the rate shall be as per the rate analysis which is appended at Sl. No 23 in
the Buildings Section of A.P. Revised Standard Data-2009, retrospectively.
3. Wherever the concrete pump is used in the data, 8 working hours per day can be
considered for rate analysis purpose.
4. For the structures where the Standard and High Strength Concretes vide IS: 456-2000 is
required, mix design shall be carried out and rates may be arrived as per the rate analysis
appended in the A.P. Revised Standard Data-2009.
5. The finished rates of the wall painting with spray plaster/ synthetic textures from BMT-J.32
to BMT-J.51 are deleted with retrospective effect as the rate analysis for similar painting
items is included the A.P. Revised Standard Data-2009.
6. The rates of Hire charges for centering & scaffolding for the SHEAR WALLS, RCC WALLS,
WATER TANK WALLS are deleted from the Buildings SoR with retrospective effect as the
same are included in the Public Health section of Common SoR.
7. The Electrical items and corresponding rates as approved and proposed by the Chief
Engineer (R&B) Electrical have been considered in the Buildings SoR-2014-15.
8. The rates for the Manholes and inspection chambers are finalized based on the detailed
rate analysis.
9. The rates of CI Pipes and fittings have been fixed based on the price lists obtained from the
dealers & manufacturers and based on the ‘Wholesale Price Indices’ published by the
Government of India and competitive quotations.
10. Similarly the Vitreous china ware, porcelain, taps & faucets, G.I Pipes, valves & fittings
SWG pipes & fittings and PVC Pipes & fittings have been finalized based on the ‘Wholesale
Price Indices’ published by the Government of India and competitive quotations.
11. The specifications of the aggregates for sizes and gradation and its adoption shall be as per
IS 383-1970 and IS 2386 (Part 1 to Part 8).
9
12. No allowance towards ‘Labour Importation & Labour Amenities’ shall be added to the datas
as they are included in the provision of ‘Over heads and contractor’s profit’.
13. For sand, gravel , murum, stones , course aggregates etc, the basic rates are for delivery at
site, excluding seigniorage (royalty) charges, unloading charges by machinery / manual

means and idle hire charges of machinery shall be allowed (as per table under chapter
“conveyance or lead and lift charges”) as applicable.
14. For all the materials, the basic rates given in the Buildings SoR are ‘landing prices’ at the
site, except where mentioned specifically.

15. For the materials where the basic rates are mentioned as ‘quarry rates’ in the Buildings
SoR, which includes initial lead of 1.0 km, lead charges are to be added for the lead
distances from the approved quarries as applicable. Wherever the term “carriage” or
“conveyance” is used in schedule item, it shall be taken to include actual leads, lifts,
loading, unloading and stacking to the satisfaction of the technical sanctioning authority
while making the price-adjustments.
16. The basic item rates provided in the schedule of rates include 50 m (conveyance by manual
means) or 1 km (conveyance by mechanical means) as initial lead and no lead charges shall
be allowed where the source of material is within the initial lead specified in item rate.
Additional lead charges shall be allowed for the lead exceeding initial lead specified in the
item rate.
17. The lead charges per unit quantity for conveyance of the materials are worked out, and
included in the schedule of rates in increment of 50 m for head load and in increment of 1
km for mechanical mode.
18. The rates for lead charges by head load up to 150 meters and by machinery up to 5 km shall
be cumulative and inclusive of lead charges for preceding lead.

19. For building works taken up in the hill areas where the materials are conveyed on ghat
roads, the lead distance may be taken as 2.0 times of the existing length of the road for the
purpose of leads only for conveyance of materials based on the certificate for the Ghat
Road given by the Superintending Engineer concerned.
20. Loading and unloading charges are not payable for conveyance by head load.
21. Loading and unloading charges are not payable for conveyance by mechanical means, for
disposal of excavated material unless specified.
10
22. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble,
size stone and cut stone, are inclusive of stacking wherever applicable.
23. The input rate for the water charges taken in Common Standard Schedule of Rates for the
basic data is for the sources at site, any water lead as applicable may be allowed as per the
conveyance charges.
24. Unless otherwise specified, all material rates shall be inclusive of all taxes, duties, levies,
royalty/seigniorage, transportation and handling costs up to project area, but excluding

‘Works Contract Tax (VAT)’.
25. As envisaged by the High Level Committee in the ‘SSR Guidelines’ appended to the
G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dt: 02-03-2009, a special software ACES is

developed for the ‘revised standard data for Building items’, which shall be adopted for
standardization and uniform rates.
26. Any errors, omissions, corrections or suggestions shall be brought to the notice of the
‘COMMITTEE OF THE CHIEF ENGINEERS (Buildings SoR)’ for corrective action.

27. For any new items to be included in the ‘Schedule of Rates’, recommendations with specific
remarks of the respective departments should reach the ‘Committee of Chief Engineers’
well in advance.
28. The CWC (Ministry of Irrigation) has recommended that “where standard or schedule of
rates are revised or where is necessary to do so, the primary guiding principle should be
escalation in labour and material cost and not on trend of rates quoted by the contractors”.
The ‘Committee of Chief engineers’ (Buildings SoR) have considered the practicality and
adoptability of the ‘Buildings-SoR’ in construction of the building projects in finalizing the
‘Buildings-SoR’.
29. Wherever feasible, more emphasis is given to the technical specifications for the SoR items
by removing the brand names of the manufacturers from the specification and list of
approved brands in the respective category for the products is grouped and appended at
the end of the SoR so as to bring to an end of encouraging a particular brand.
30. The estimate preparing authorities are advised to specify the brand names/ manufacturers
in the contract documents as per the requirement.

31. The technical specifications, brand names and the corresponding rates given in the ‘water
proofing and chemical admixtures’ section are for the guidance only. The estimate
preparing authorities are requested to obtain literature for usage / application of
11
construction / water proofing materials, epoxies etc, from the manufacturers or authorized
suppliers in the contract documents as per the requirement.
5.0 CONCLUSION
1. The Committee of Chief Engineers on Buildings-SoR: 2014-15 (Civil & Electrical) has met in
the chambers of Chief Engineer (R&B) Buildings, on 30-05-2014 at 3.00 P.M., and approved
the Buildings SoR:2014-15. The increase in rates of certain materials of items is considered
based on the Whole Sale Price Indices published by the Economic Advisor, Government of
India.
2. SSR Rates for Sanitary & water supply items are purely for the guidance of the officers in
preparation of estimates vide Para 113 of APPWD code. Authority who prepares the
estimate is however responsible for proper rates as envisaged in Para 45 of APPWD code.
3. The rates published in the Buildings SoR are ceiling rates and the estimate preparing
authorities are responsible for the correctness and reasonableness of the rates and
technical specifications adopted in the estimates.
4. The committee has further resolved to amend the Standard Data of the following items of
A.P. Revised Standard Data-2009.
6.0 AMENDMENTS TO A.P. REVISED STANDARD DATA-2009
1. The Committee of Chief Engineers have decided to allow 1% on cost of materials and
labour towards water charges wherever water is required for mixing and curing purposes
viz all masonry works including RR Masonry, CRS Masonry, Brick works of all varieties,
Plastering works and RCM works, all types of flooring & skirting works. The water charges
provision shall be allowed in the data items where the specific provision in the standard
data item is missing.
2. Water charges in refilling and filling has to be allowed as given below:
BLD-CSTN-2-8 16 Sand filling
Unit = cum
Taking output = 1 cum
a) Labour
Mate day -
Mazdoor (Unskilled) day 0.31
b) Material
Sand cum 1.00
Water Kl 0.10
c&d) Overheads & Contractors Profit
Rate per cum = a+b+c+d
12
BLD-CSTN-2-9 17 Earth filling (ordinary soil)

Unit = cum
Taking output = 6 cum
a) Labour
Mate day -
Mazdoor (Unskilled) day 3.12
b) Material
Water Kl 0.72
c) & d) Overheads & Contractors Profit
Cost for 6 cum = a+b+c
Rate per cum = (a+b+c)/6
Note : Cost of transportation of good quality earth has not been
included. Only labour for carrying carted earth with a lead of 50
m to the foundation pits has been taken in the rate. The cost of
carted earth/ gravel may be worked out separately if the same is
not available from the adjoining area.
13
Civil Items - Buildings SoR: 2014-15
BUILDING ITEMS
14
SS RATE
Sl.
Item Code Description of item Unit FOR
No
2014-15
1 2 3 4 5
A BRICKS & BUILDING BLOCKS
1 BMT-A.01 Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular 1000 4,700.00
or traditional size 23 x 11 x 7 cm (ex-quarry price - excluding cost of Nos
conveyance, loading & unloading)
2 BMT-A.02 Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Modular or 1000 5,500.00
traditional size 19 x 9 x 9 cm (ex-quarry price - excluding cost of conveyance, Nos
loading & unloading)
3 BMT-A.03 Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - Each 25.00
IS:12894-1990 - CLASS - 7.5 (ex-quarry price - excluding cost of conveyance,
loading & unloading) 290 x 225 x 140 mm
loading & unloading) 290 x 112/100 x 140 mm
10 BMT-A.10 Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm - Each 24.00
IS:12894-1990 - CLASS - 5 (ex-quarry price - excluding cost of conveyance,
loading & unloading) 290 x 112/100 x 140 mm
15
SS RATE
Sl.
No
2014-15
17 BMT-A.17 Supply of well burnt cinder aggregates as per IS: 2686-1977 1 Cum 670.00
18 BMT-A.18 Supply of Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 Each 56.00
(Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 (landing
cost - including cost of conveyance, loading & unloading) 600 x 200 x 100 mm
B NATURAL FLOORING STONES (ex-quarry price - excluding cost of
22 BMT-B.01 Kadapa slab 40 mm thick and size not less than 0.457 M x 0.457 M 1 Sqm 96.00
23 BMT-B.02 Kadapa slab 50 mm thick and size not less than 0.457 M x 0.457 M 1 Sqm 110.00
24 BMT-B.03 Shahabad /Tandur Rough Stone slabs of minimum of 25 mm thick 10 Sqm 961.00
25 BMT-B.04 Shahabad / Tandur Rough Stone slabs of minimum 40 mm thick 10 Sqm 1,239.00
26 BMT-B.05 Polished Shahabad/ Tandur stone slabs of 15 to 18 mm thick (0.457x0.304) or 10 Sqm 1,654.00
any other size as specified
27 BMT-B.06 Polished black Kadapa slabs minimum of 15 mm thick (0.457x0.457M) 10 Sqm 1,379.00
28 BMT-B.07 Polished Bethamcherla pure (marble type) white stone minimum 25 mm thick 10 Sqm 3,859.00
(0.254Mx0.254M)
29 BMT-B.08 Polished Bethamcherla coloured stone minimum 25 mm thick (0.254M 10 Sqm 2,756.00
x0.254M)
30 BMT-B.09 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ 1 Sqm 2,947.00
premium colours
31 BMT-B.10 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black 1 Sqm 2,562.00
and regular colours
32 BMT-B.11 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black 1 Sqm 2,178.00
33 BMT-B.12 Polished Marble slabs of any variety (Such as Dongari/ Adanga/ Marodh/ 1 sqm 729.00
Rajganpur etc) 16 mm to 20 mm (average) thick (size 0.457 M x 0.457 M) /
(0.6M x 0.6M)
34 BMT-B.13 Polished Marble slabs of any variety (Such as Dongari/ Adanga/ Marodh/ 1 sqm 589.00
Rajganpur etc) polished 16 mm to 20 mm (average) thick 0.305 M x 0.305 M
35 BMT-B.14 Polished Marble slabs of any variety and gang saw cut (Such as Dongari/ 1 sqm 999.00
Adanga/ Marodh/ Rajganpur etc) 16 mm to 20 mm (average) thick ( 0.610 M
width of any length)
36 BMT-B.15 Polished Marble Tiles 8 mm thick of all sizes and varieties 1 sqm 476.00
37 BMT-B.16 Granite stone tiles 8 mm thick (mirror polished of all shades) 1 sqm 999.00
C WALL & FLOOR TILES (landing cost - including cost of conveyance, loading &
unloading)
38 BMT-C.01 Supply of Ceramic floor tiles of notless than 7.3mm thick 1st quality in all 1 sqm 465.00
shades and designs
39 BMT-C.02 Supply of Edge Cut - Rectified Ceramic floor tiles of notless than 8 mm thick 1 sqm 560.00
1st quality in all shades and designs
40 BMT-C.03 Supply of decorated white background glazed wall tiles of any size and of 5 to 1 sqm 571.00
7 mm thick
16
SS RATE
Sl.
No
2014-15
41 BMT-C.04 Supply of screenprinted, decorated coloured background glazed wall tiles of 1 sqm 636.00
any size and of 5 to 7 mm thick
42 BMT-C.05 Supply of decorated coloured background glazed wall tiles of any size and of 5 1 sqm 603.00
to 7 mm thick
43 BMT-C.06 Supply of Ist quality, plain white glazed wall tiles of any size and of 5 to 7 mm 1 sqm 348.00
thick
44 BMT-C.07 Supply of Ist Quality, glazed plain coloured wall tiles of any size and of 5 to 7 1 sqm 413.00
mm thick
45 BMT-C.08 Supply of precast terrazzo tiles 20 mm thick of medium shades 1 sqm 305.00
46 BMT-C.09 Supply of precast terrazzo tiles 20 mm thick of dark shades 1 Sqm 297.00
47 BMT-C.10 Supply of coloured precast terrazzo tiles of 20 mm thick 1 Sqm 320.00
48 BMT-C.11 Supply of white/ plain precast terrazzo tiles of 20 mm thick 1 Sqm 248.00
49 BMT-C.12 Supply of grey precast terrazzo tiles of 20 mm thick 1 Sqm 161.00
50 BMT-C.13 Supply of vitrified polished floor tiles of size not less than 900 x 900 x 10 mm 1 Sqm 1,274.00
thickness regular finish and normal colours
51 BMT-C.14 Supply of vitrified polished floor tiles of size not less than 795 x 795 mm x 8 1 Sqm 1,123.00
mm thickness regular finish and normal colours
52 BMT-C.15 Supply of vitrified polished floor tiles of size not less than 598 x 598 mm x 8 1 Sqm 1,048.00
mm thickness glossy finish permium colours
53 BMT-C.16 Supply of vitrified polished floor tiles of size not less than 598 x 598 mm x 8 1 Sqm 631.00
mm thickness regular finish and normal colours
54 BMT-C.17 Supply of vitrified polished floor tiles of size not less than 400 x 400 x7mm 1 Sqm 674.00
thickness normal colours
55 BMT-C.18 Supply of glass mosaic tiles 1st quality of size 20x20x4 mm thick 1 Sqm 1,423.00
56 BMT-C.19 Providing of Vitrified/ Ceramic Tile flooring for required areas using 1 Sqm 154.00
different sizes, approved colour and make fixing with synthetic/ epoxy
adhesive in specified thickness with out joint including all taxes excluding cost
of tiles 600 x 600 mm and above sizes tiles.
57 BMT-C.20 Providing of Vitrified/ Ceramic Tile flooring for required areas using 1 Sqm 124.00
different sizes, approved colour and make fixing with synthetic/ epoxy
adhesive in specified thickness with out joint including all taxes excluding cost
of tiles 400 x 400 mm and below size tiles
58 BMT-C.21 Providing tile flooring with synthetic/ epoxy adhesive in specified thick and 1 Sqm 176.00
pointing specified colour cement based polymer grout mixed with grout
admix including all taxes excluding cost of tiles: 600 x 600 mm tiles with 3 mm
joints width
admix including all taxes excluding cost of tiles:600 x 600 mm tiles with 4 mm
joints width
joints width
joints width
joints width
17
SS RATE
Sl.
No
2014-15
joints width
joints width
joints width
66 BMT-C.29 Providing Glass Mosaic tiles using specified pattern fixing with grout and 1 Sqm 307.00
approved colour of joint filling with admix cement grouting including all
taxes excluding cost of tiles
pointing with specified colour epoxy grout excluding cost of tiles:600 x 600
mm tiles with 4 mm joints width
74 BMT-C.37 Providing Glass Mosaic tiles using specified pattern fixing with epoxy grout 1 Sqm 294.00
and approved colour of joint filling with admix cement grouting including all
taxes excluding cost of tiles
75 BMT-C.38 Providing Glass Mosaic tiles using specified pattern fixing with epoxy grout and 1 Sqm 1,310.00
approved colour cement admix grout including all taxes excluding cost of tiles
76 BMT-C.39 Supply of design wall tiles of any colour and size other than highlighters and of 1 Sqm 436.00
thickness 8 to 10 mm including all taxes
77 BMT-C.40 Supply of design highlighters wall tiles of any colour and size and of thickness 8 1 Sqm 497.00
to 10 mm including all taxes
78 BMT-C.41 Supply of design highlighters wall tiles of premium / radium colours and of any 1 Sqm 560.00
size and of thickness 8 to 10 mm including all taxes
79 BMT-C.42 Supply of plain exterior wall tiles of thickness 20 mm of any size for wall 1 Sqm 447.00
claddings
80 BMT-C.43 Supply of exterior design wall tiles of thickness 20 mm of any size for wall 1 Sqm 572.00
claddings
81 BMT-C.44 Supply of Plain design floor and wall tiles set with floor tiles of thickness 15 1 Sqm 643.00
mm and wall tiles of thickness 9 mm
18
SS RATE
Sl.
No
2014-15
82 BMT-C.45 Supply of textured design floor and wall tiles set with floor tiles of thickness 1 Sqm 691.00
15 mm and wall tiles of thickness 9 mm
83 BMT-C.46 Supply of premium plain design floor and wall tiles set with floor tiles of 1 Sqm 930.00
thickness 15 mm and wall tiles of thickness 9 mm
84 BMT-C.47 Supply of premium textured design floor and wall tiles set with floor tiles of 1 Sqm 966.00
thickness 15 mm and wall tiles of thickness 9 mm
85 BMT-C.48 Supply of premium plain design highlighter combination floor and wall tiles set 1 Sqm 1,213.00
with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm but
excluding highlighters
86 BMT-C.49 Supply of premium plain design highlighter combination floor and wall tiles set 1 Sqm 1,243.00
with floor tiles of thickness 15 mm and wall tiles of thickness 9 mm but
including highlighters
87 BMT-C.50 Vitrified polished floor tiles of size not less than 1000 x 1000 x 10 mm 1 Sqm 1,747.00
thickness with nano technology printing and high glossy finish/ premium
colours
88 BMT-C.51 Vitrified polished floor tiles of size not less than 795 x 795 mm x 8 mm 1 Sqm 1,543.00
thickness with nano technology printing and high glossy finish/ premium
colours special series
thickness with nano technology printing and glossy finish permium colours
high glossy finish/ premium colours special series
thickness with nano technology printing and glossy finish permium colours
high glossy finish/ premium colours special series
D PAVING & INTERLOCKING TILES (landing cost - including cost of conveyance,
91 BMT-D.01 Chequered Terrazzo tiles of 22 mm thick (Medium shade) 0.254 M x 0.406 M 1 sqm 314.00
92 BMT-D.02 Chequered Terrazzo tiles of 22 mm thick (Dark shade) 0.254 M x 0.406 M 1 sqm 288.00
93 BMT-D.03 Chequered Terrazzo tiles of 30 mm thick (Light shade) 0.305 M x 0.305 M 1 sqm 288.00
94 BMT-D.04 Chequered Terrazzo tiles of 30 mm thick (Dark shade) 0.305 M x 0.305 M 1 sqm 306.00
95 BMT-D.05 Chequered Terrazzo tiles of 30 mm thick ( medium shade) 0.305 M x 0.305 M 1 sqm 270.00
96 BMT-D.06 Supply, laying & fixing of 60 mm thick cement Mosaic reflective concrete 1 Sqm 569.00
pavers of grade M-40 and above including labour charges, loading &
unloading, laying to desired lines and levels complete excluding cost of
cement, sand, water, electricity etc
97 BMT-D.07 Supply, laying & fixing of 30 mm thick cement Mosaic reflective concrete 1 Sqm 588.00
pavers of grade M-40 and above including labour charges, loading &
unloading, laying to desired lines and levels complete excluding cost of
cement, sand, water, electricity etc
98 BMT-D.08 Supply of high strength Cement Concrete Designer Tiles of 30 mm thickness of 1 Sqm 518.00
M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with
imported colours and white cement to get required reflective glazing inclusive
of all taxes
99 BMT-D.09 Supply of high strength Cement Concrete interlocking Designer Pavers of 60 1 Sqm 571.00
mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour
pigmentation with imported colours and white cement to get required
reflective glazing inclusive of all taxes
100 BMT-D.10 Supply of high strength Cement Concrete interlocking Designer Pavers of 80 1 Sqm 649.00
mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour
pigmentation with imported colours and white cement to get required
reflective glazing inclusive of all taxes
19
SS RATE
Sl.
No
2014-15
101 BMT-D.11 Supply of high strength Cement Concrete interlocking Regular Pedestrian 1 Sqm 335.00
Pavers of 60 mm thickness of M- 40 Grade of which top 12 mm thick shall be
for colour pigmentation with imported colours and white cement to get
required reflective glazing inclusive of all taxes
102 BMT-D.12 Supply of high strength Cement Concrete interlocking Regular Pedestrian 1 Sqm 362.00
Pavers of 80 mm thickness of M- 40 Grade of which top 12 mm thick shall be
for colour pigmentation with imported colours and white cement to get
required reflective glazing inclusive of all taxes
103 BMT-D.13 Supply of high strength Cement Concrete pre-polished ready to lay floor tiles 1 Sqm 558.00
of any colour, design and any size with 22 mm thickness including all taxes
with compressive strength not less than 450 Kg/cm² conforming to IS 516
104 BMT-D.14 Supply of high strength Cement Concrete Step tiles of regular colour, design 1 Sqm 638.00
and of 25 mm thickness including all taxes
105 BMT-D.15 Supply of high strength Cement Concrete pre-polished Step tiles of any 1 Sqm 712.00
premium colour, design and of 25 mm thickness including all taxes
106 BMT-D.16 Supply of Cement Concrete interlocking cement grade finish non-reflective 1 Sqm 460.00
Pavers of 60 mm thickness and dumbell, zig-zag, I-block shapes etc., inclusive
of all taxes
of all taxes
of all taxes
E TIMBER & ROOFING MATERIALS (landing cost - including cost of conveyance,
Note: Before proposing the Teak Wood Items, the estimating authorities
shall obtain prior approval from the competent authority
109 BMT-E.01 Medium Teak Wood scantlings: up to 2.0 M 1 cum 76,280.00
110 BMT-E.02 Medium Teak Wood scantlings: 2.0 to 3.0 M 1 cum 84,756.00
111 BMT-E.03 Medium Teak Wood scantlings: above 3.0 M 1 cum 93,232.00
112 BMT-E.04 Medium Teak Wood Plancks: any thickness 1 cum 1,52,561.00
113 BMT-E.05 Best Teak Wood scantlings: up to 2.0 M 1 cum 1,31,372.00
114 BMT-E.06 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 1,39,848.00
115 BMT-E.07 Best Teak Wood scantlings: above 3.0 M 1 cum 1,48,324.00
116 BMT-E.08 Best Teak Wood Plancks: any thickness 1 cum 1,65,275.00
117 BMT-E.09 Burma Teak Wood scantlings: up to 2.0 M 1 cum 1,36,363.00
118 BMT-E.10 Burma Teak Wood scantlings: 2.0 to 3.0 M 1 cum 1,40,258.00
119 BMT-E.11 Burma Teak Wood scantlings: above 3.0 M 1 cum 1,47,522.00
120 BMT-E.12 Burma Teak Wood Plancks: any thickness 1 cum 1,59,741.00
121 BMT-E.13 Assam Teak Wood scantlings: any length 1 cum 48,392.00
122 BMT-E.14 Assam Teak Wood Plancks: any thickness 1 cum 70,170.00
123 BMT-E.15 Sal Wood scantlings: any length 1 cum 51,994.00
124 BMT-E.16 Sal Wood Plancks: any thickness 1 cum 69,327.00
125 BMT-E.17 A.C sheet Corrugated 6 mm thick 1 sqm 222.00
126 BMT-E.18 A.C sheet plain 4 m thick 1 sqm 159.00
127 BMT-E.19 A.C sheet plain 6 m thick 1 sqm 165.00
128 BMT-E.20 Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1 mm to 0.8 mm 1 kg 60.00
thickness)
F MILD, GALVANIZED & STAINLESS STEEL (landing cost - including cost of
20
SS RATE
Sl.
No
2014-15
129 BMT-F.01 Mild Steel Hallow single rebate general putpose door frames manufactured 1 Rm 378.00
using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled
Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS
4351 - 2003 including pretreatment, phosphating with Hinges, Base Ties,
Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts,
Aldrops, Lock & Strike plates etc. for both single and double shutter doors
130 BMT-F.02 Country Nails 1 Kg 61.00
131 BMT-F.03 Wire Nails 1 Kg 61.00
132 BMT-F.04 Mild Steel Tubes & pipes of all diameters as per IS-1161 1 Kg 61.00
133 BMT-F.05 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters - 1 Kg 200.00
202 Grade
134 BMT-F.06 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters 1 Kg 355.00
for - 304 Grade
135 BMT-F.07 Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type A - 1 Kg 82.00
IOWA Type Designation as per standard specification
136 BMT-F.08 Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type B - 1 Kg 82.00
Glidden Type Designation as per standard specification
137 BMT-F.09 Expanded metal sheets as per IS-412-1962- Light Weight-25 mm(SWM)x75 1 Sqm 146.00
mm (LWM)3.25 mm Wide and 1.25 mm thick
mm(LWM) 2.50 mm Wide and 1.25 mm thick
140 BMT-F.12 Expanded metal sheets as per IS-412-1962- Medium Weight-25 mm(SWM)x75 1 Sqm 200.00
143 BMT-F.15 Expanded metal sheets as per IS-412-1962- Heavy Weight-25 mm(SWM)x75 1 Sqm 228.00
146 BMT-F.18 Galvanized Iron fly proof wire mesh of not less than 20 gauge 1 Sqm 217.00
147 BMT-F.19 Stainless steel fly proof wire mesh of not less than 20 gauge 1 Sqm 527.00
148 BMT-F.20 Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 1 Sqm 477.00
2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge
2721-1979: 2½"x2½" (63 mm x 63 mm) - 8 Gauge
2721-1979: 3"x3" (76 mm x 76 mm) - 8 Gauge
2721-1979: 4"x4" (102 mm x 102 mm) - 8 Gauge
2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge
2721-1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) - 8 Gauge
21
SS RATE
Sl.
No
2014-15
156 BMT-F.28 Rabbit wire mesh (chicken mesh) of not less than 30 gauge 1 Sqm 17.00
157 BMT-F.29 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA 1 Sqm 2,861.00
laths, interlocked together through their entire length and jointed together at
the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia
nominal bore MS B class pipe with brackets, plates, guide channels, stoppers,
bottom locking plates and arrangements for inside & outside locking with
push-pull operations including cost of hood cover and springs complete,
painted with one coat of approved steel primer, locks, ball bearings, all
accessories etc complete for finished item of work as per special spn: 1108
158 BMT-F.30 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 1 Sqm 2,503.00
x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm
dia steel pulleys, the top, bottom and side vertical frames of the collapsible
gate with 65x65mmx8mm MS Angle and middle guide rail at site height with
65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold
fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all
accessories all fixtures and painted with one coat of approved steel primer
etc., complete for finished item of work as per special spn 1105
159 BMT-F.31 Powder Coated Mild Steel Hallow single rebate door frames manufactured 1 RM 696.00
using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled
Close Annealed (CRCA) and profile size of 105 x 60 mm conforming to IS 4351 -
2003 including pretreatment, Galvanized as per IS:277, zinc phosphating
finished with Thermosetting Polyurethane paint of Aliphatic Grade providing
high levels of scratch resistance and durability/Epoxy polyester powder for
powder coating paint thickness 60 – 65 microns(Dry film thickness)Stainless
Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame with Hinges,
Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for
Tower Bolts, Aldrops, Lock & Strike plates etc. for both single and double
shutter doors
160 BMT-F.32 Supply and Fixing Door Frames made of Skin pass galvanized Iron Sheet ( 1 RM 787.00
conform to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with
Hot Zinc Coating of 120 grams/ Sq.mtr) with pure polyester powder coating of
60 - 65 Microns (Dry Film thickness) manufactured from 1.2 mm thick
galvanized steel sheet formed to single rebate profile of size 100 mm x 58 mm
fitted with “TEE” anchors and supplied to knock down /welded form with
Miter Joint for Bolted Assembly at site, cleaned and coated with Polyurethane
powder coating of thickness 65 – 75 microns (Dry Film Thickness) & Oven
Baked at 200 Degree Centigrade for Wood Grain finish, Stainless Steel Ball
Bearing Butt Hinges of 102 x 76 x 3mm thick fixed flush to the frame
161 BMT-F.33 Supply and Fixing Door Frames made of Skin pass galvanized Iron Sheet ( 1 RM 861.00
conform to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with
Hot Zinc Coating of 120 grams/ Sq.mtr) with pure polyester powder coating of
60 - 65 Microns (Dry Film thickness) manufactured from 1.2 mm thick
galvanized steel sheet formed to double rebate profile of size 148 mm x 58
mm fitted with “TEE” anchors and supplied to knock down /welded form with
Miter Joint for Bolted Assembly at site, cleaned and coated with Polyurethane
powder coating of thickness 65 – 75 microns (Dry Film Thickness) & Oven
Baked at 200 Degree Centigrade for Wood Grain finish, Stainless Steel Ball
Bearing Butt Hinges of 102 x 76 x 3mm thick fixed flush to the frame
G FIXTURES FOR DOORS & WINDOWS
162 BMT-G.01 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 172.00
22
SS RATE
Sl.
No
2014-15
167 BMT-G.06 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long Each 75.00
175 BMT-G.14 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 25.00
180 BMT-G.19 Brass Butt hinges (IS:205)- 75 mm Long Each 71.00
184 BMT-G.23 Aluminium Butt hinges (IS:205)- 75 mm Long Each 108.00
188 BMT-G.27 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long Each 12.00
192 BMT-G.31 Aluminium Door Handles (IS:208) 75 mm Long Each 73.00
196 BMT-G.35 MS-Powder Coated Door Handles (IS:208) 125 mm Long Each 33.00
197 BMT-G.36 MS-Powder Coated Door Handles (IS:208) 150 mm Long Each 49.00
198 BMT-G.37 Brass Aldrop (IS:2681) 300 mm long Each 1,247.00
201 BMT-G.40 Aluminium Aldrop (IS:2681) 200 mm long Each 319.00
204 BMT-G.43 MS-Powder Coated Aldrop (IS:2681) 200 mm long Each 112.00
207 BMT-G.46 Brass Door Stoppers Each 192.00
208 BMT-G.47 Brass Windows Stay Each 217.00
209 BMT-G.48 Aluminium Flat Latches: 200 mm long Each 154.00
23
SS RATE
Sl.
No
2014-15
212 BMT-G.51 MS-Powder Coated Flat Latches: 250 mm long Each 56.00
213 BMT-G.52 MS-Powder Coated Flat Latches: 300 mm long Each 71.00
214 BMT-G.53 MS-Powder Coated - Door Stoppers Each 49.00
215 BMT-G.54 Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated with PVC RM 124.00
rings
216 BMT-G.55 Supply & fixing drapery bracket - brass powder coated pair 438.00
217 BMT-G.56 Deluxe window stay Aluminium Each 140.00
218 BMT-G.57 Heavy duty Aluminium Door stopper Each 61.00
219 BMT-G.58 Brass fancy handles 150 mm Each 325.00
222 BMT-G.61 Brass fancy handles 300 mm Each 1,015.00
223 BMT-G.62 Brass fancy handles 450 mm Each 1,587.00
224 BMT-G.63 Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: Each 1,005.00
3564) with double speed adjustment, with necessary accessories and screws
etc. complete
225 BMT-G.64 Double action Stainless steel cover plate and cast body iron floor spring (IS Each 1,856.00
6315- Table-1)
226 BMT-G.65 Double action Brass cover plate and cast brass body floor spring (IS 6315- Each 4,404.00
Table-1)
227 BMT-G.66 Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete Each 908.00
set
228 BMT-G.67 Heavy duty mortise lock 6/7 levers (IS:2209) with brass heavy handles Each 2,335.00
229 BMT-G.68 Brass latch heavy 300 mm Each 625.00
232 BMT-G.71 Friction stay hinges for windows Each 104.00
233 BMT-G.72 Keyless lockset for toilet doors with CP or PC knob handles (complete set) Each 338.00
234 BMT-G.73 Keyless lock set for toilet doors with brass knob handles Each 894.00
235 BMT-G.74 Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Each 1,163.00
Door Closer (IS: 3564) with double speed adjustment with necessary
accessories and screws etc. complete (Type-1: for width of doors up to 700
mm)
accessories and screws etc. complete (Type-2: for width of doors 701 to 850
mm)
accessories and screws etc. complete (Type-3: for width of doors 851 to 1000
mm)
238 BMT-G.77 Providing and fixing double action brass cast hydraulic floor spring (IS:6315- Each 3,678.00
Table 1) for doors including cost of cutting floors as required, embedding in
floors and S.S./ Brass cover plates with brass pivot and single piece M.S. Sheet
outer box with slide plate etc. complete (door weight capacity up to 130 kgs)
239 BMT-G.78 Providing and fixing double action brass cast hydraulic floor spring (IS:6315- Each 2,734.00
Table 1) for doors including cost of cutting floors as required, embedding in
floors and S.S.cover plates with brass pivot and single piece M.S. Sheet outer
box with slide plate etc. complete (door weight capacity up to 80 kgs)
24
SS RATE
Sl.
No
2014-15
240 BMT-G.79 Providing of brass cast body Floor Spring IS: 6315 sleek in size with the S.S. / Each 12,149.00
Brass Cover plates of Length 320 mm x Breadth 130 mm size along with the
Top Patch, Bottom Patch, Door Lock and Pivot with Double Cylinder etc.
complete for Heavy duty Glass doors.
H WATER PROOFING CHEMICALS & ADMIXTURES
Literature for usage / application of construction / water proofing materials,
epoxies etc, may be obtained from manufacturers.
241 BMT-H.01 Supply of cement based Impervious Water Proofing powder compound 1 Kg 52.00
242 BMT-H.02 Providing Tar felting roof repairs with Rainseal Felt/ Zori-felt BT or equivalent 1 Sqm 244.00
duly applying one coat of appropriate grade of bitumen in hot condition @ 0.2
Kg/1Sqm of roof area, fixing tar felt (Manufactures to IS 1322/1972
specification), applying second coat of appropriate grade of hot bitumen at
1.20 Kg/1Sqm of roof area and spreading course aggregate (sand) at 0.063
cum per 1 Sqm of roof area finished item
243 BMT-H.03 Providing waterproofing treatment by supplying and applying Rainseal HDP 1 Sqm. 265.00
1500 /ROOFSHIELD-1500 OR ZORISHIELD-1500 equivalent (1.50 mm thickness,
2.25Kg per Sq. Mt and 20 X1 Mtr. roll with a centre core of 90 micron thickness
HMHDPE film) Water Proofing Membrane. A) apply one coat of Bituminous
Emulsion, first coat of bituminous grade 85/25, fix "Rainseal HDP
1500/ROOFSHIELD-1500 OR equivalent " water proofing membrane, apply
second coat of Bitumen grade 90/15 after sealing all the joints and abutments
with a Gas torch and apply one coat of Rainseal SAP- BITUMINOUS
ALUMINIUM PAINT for heat resistance for finished item
244 BMT-H.04 Providing chemical waterproof treatment with Brick bat coba & chemical 1 Sqm 870.00
cement mortars to exposed RCC roof slab surfaces to required slopes
mixed with Conproof NO.1/ Rain Proof No 1/Zoriproof (100 mL Per Bag of 50
Kgs Cement) waterproofing chemical compound, laid over roof slab and
brickbat coba treatment in chemical cement mortar 100 mm thick at the
centre and 80 mm thick at the edges finished smooth with a floating coat of
chemical mixed cement mortar as per the manufacturer specification
including cost and conveyance of all materials like sand, chemical–
Conproof NO.1/ Rain Proof No 1 Zoriproof (100 mL Per Bag of 50 Kgs Cement)
waterproofing compound, water etc., to site, including seigniorage charges
and operational, incidental, and labour charges for mixing mortar, laying, lift
charges, rendering smooth curing including rounding off junctions of wall
and slab etc., complete for finished item of work (with a guarantee of 10
years)
245 BMT-H.05 Providing chemical waterproof treatment with Brick bat coba & chemical 1 Sqm 723.00
cement mortars to exposed RCC roof slab surfaces to required slopes
mixed with – Conproof NO.1/ Rain Proof No 1/Zoriproof (100 ML Per Bag of
50 Kgs Cement) waterproofing chemical compound, laid over roof slab and
brickbat coba treatment in chemical cement mortar 80 mm thick at the
centre and 60 mm thick at the edges finished smooth with a floating coat of
chemical mixed cement mortar as per the manufacturer specification
including cost and conveyance of all materials like sand, chemical –
Conproof NO.1/ Rain Proof No 1/Zoriproof (100 mL Per Bag of 50 Kgs Cement)
waterproofing compound, water etc., to site, including seigniorage charges
and operational, incidental, and labour charges for mixing mortar, laying, lift
charges, rendering smooth curing including rounding off junctions of wall
and slab etc., complete for finished item of work (with a guarantee of 10
years)
246 BMT-H.06 Construction Chemicals, Epoxy & Admixtures - Chloride free water reducing 1 litre 221.00
and plasticizing admixture : Consplax/ Conflow SNP1 Zoriplast (Dosage : 20 ml
Per Bag of 50 Kgs Cement) or equivalent
25
SS RATE
Sl.
No
2014-15
247 BMT-H.07 High strength Acrylic blended platicizer and Water reducing agent - 1 litre 161.00
Roofplast HS 100/ Conflow SNP20 or Zoriplast HS (Dosage : 400 ml to 500 ml
Per Bag of 50 Kgs Cement)
248 BMT-H.08 Quick setting, rapid hardening and water proofing compound - : Rapidstrong 1 litre 80.00
QS/Conflow SNPA or ZorirapidR or Equivalent (Dosage : 1 to 3 Ltrs per bag of
50 Kgs Cement depending on the setting time required).
249 BMT-H.09 Chloride free super plasticizer for high range water reducing admixture : Litre 80.00
Roofplast SP 35/Conflow SNS I or Zoriplast SP 350 (Dosage: 200 ml to 500 ml
per bag of 50 Kgs Cement) or equivalent.
250 BMT-H.10 Chloride free super plasticizer for high early strength and high range water Litre 80.00
reducing admixture : Roof plast SP 45/Conflow SNS 2 or Zoriplast SP 450
(Dosage: 200 ml to 500 ml per bag of 50 Kgs Cement) or equivalent.
251 BMT-H.11 Set accelerator and plasticizer: Roofplast SCA/ Conflow SNA or Zoriset or Kgs 75.00
Equivalent (Dosage:1 Kg to 3 Kgs per bag of 50 Kgs Cement depending on
the setting time required )
252 BMT-H.12 Chloride free High power slump retaining and retarding plasticizer: Litre 150.00
Roofplast RT5/Conflow SNR or Zoriplast RT5 (Dosage: 15ml to 40 ml per bag
of 50 Kgs Cement) or Equivalent.
253 BMT-H.13 Air Entraining Agent: Roofplast AEA/ Conflow SNE or Zoriplast AEA (Dosage : Litre 139.00
5ml to 25 ml per bag of 50 Kgs Cement) or Equivalent (Dosage : 15ml per Bag
of 50 Kgs Cement)
254 BMT-H.14 Chloride free super plasticizer, high range water reducing and retarding Litre 94.00
admixture - Roofplast SR5/Conflow SNS-3 SPL or Zoriplast SRT5 (Dosage : 300
ml to 400 ml per bag of 50 Kgs Cement) or equivalent
255 BMT-H.15 Retarding super plasticizer: Conflow SNS-3 or Accelerating Plasticizers : Litre 77.00
Roofplast SA/ Zoriplast AC (Dosage : 500 ml to 1 Ltr per bag of 50 Kgs
Cement) or Equivalent.
256 BMT-H.16 Waterproof Cement Mortar Plasticizer: Roofpalst MP/ Morflow SN 1 or Litre 200.00
Zoriplast MP ( Dosage : 100 ml per bag of 50 Kgs Cement) or Equivalent.
257 BMT-H.17 Integral Cement Waterproofing Compound : Conproof No.1/ Rainproof Litre 210.00
No.1/Conflow SNW1 or Zoriproof (Liquid Form) (Dosage : 100 ml Per Bag of
50 Kgs Cement)
258 BMT-H.18 Integral Cement Waterproofing Compound :Conproof No.1/ Rainproof Kg 32.00
No.1/Conflow SNW2 or Zoriproof ( Powder Form) ( Dosage : 500 Grams per
bag of 50 Kgs Cement) or Equivalent.
259 BMT-H.19 High plasticizing cement waterproofing liquid based on naphtha lane Litre 96.00
formaldehyde : Conproof LW 200/ Rainproof LW SPL/Conflow SNW2 - 750
Gms or Zorishield 200 or Equivalent. (Dosage:200 ml per Bag of 50 Kgs
Cement)
260 BMT-H.20 Block Admixture: Roofplast BA/ Conflow SNB or Zoriplast BA (Dosage: 20 ml Litre 145.00
to 25ml per bag of 50 Kgs Cement) or Equivalent.
261 BMT-H.21 Sprayed Concrete Accelerator: Shotset SN1 or Roofplast SA/ Zoriset SCA or Kg 73.00
Equivalent (Dosage : 500 ml – 2.5 Ltrs/bag of Cement ).
262 BMT-H.22 Surface treatment water Based high power curing compounds: Curaid SN1 or Litre 100.00
Roofexcure WB/Zoricure WB (Coverage : 5-6 Sq. Mtrs / Ltr / Coat ) or
Equivalent.
263 BMT-H.23 Concrete wax based pigmented curing compound : Curaid SN2 or Roofexcure Litre 200.00
WX/ Zoricure SB or Equivalent. (Coverage : 4-5 Sq. Mtrs / Ltr / Coat )
264 BMT-H.24 Formwork & Mould Treatment: Roofcare MRA/ Shutterol SNU or Zorislip or Litre 145.00
Equivalent. (Coverage: 1 Ltr Zorislip will cover approx 20 to 30 m2 on
method and material of the form )
26
SS RATE
Sl.
No
2014-15
265 BMT-H.25 Cleaning and acid etching agents: Tilex Kleen AC/ Uniklen SN1 or Zorikleen AC Litre 75.00
or Equivalent.
266 BMT-H.26 Ready to use universal degreasing and cleaning agents:Tilex Kleen DA/ Litre 80.00
Uniklen SN2 or Zorikleen DA or Equivalent.
267 BMT-H.27 Liquid Cleaning Agent: Tilex Kleen LC/ Uniklen SN3 or Zorikleen LC or Litre 129.00
Equivalent.
268 BMT-H.28 Non-shrink Free flow high strength injection grout : Rapidstrong Grout GP2/ Kg 34.00
Expacrete SN50 or Zorigrout GP 2 or Equivalent. (Yield 13.5 Ltrs Per 25 Kgs
Bag).
269 BMT-H.29 Non-shrink Free flow grout: Rapidstrong Grout GP3/Expacrete SN70 or Kg 36.00
Zorigrout GP 3
270 BMT-H.30 Non-shrink Free flow grout: Rapidstrong Grout GP4/ Expacrete SN90 or Kg 39.00
Zorigrout GP 4
271 BMT-H.31 High strength cementitious non-shrink Free flow grout : Rapidstrong Grout 1 Kg 35.00
Admix/ Expacem SN2 or Zorigrout GP 1 or Equivalent. (250 Gms per Bag of pack
50 Kgs Cement).
272 BMT-H.32 Low viscosity Epoxy resin injection grout (Two parts) :Rapidstrong Grout Kg 798.00
EP/Expacrete SNE 1 or Zorigrout EP or Equivalent.(Density 1.07 Kg Per Ltr )
273 BMT-H.33 Epoxy Resin Grouts:Rapidstrong Grout EP3/ Expacrete SNE 3 or Zorigrout EP 3 Kg 169.00
or Equivalent.
274 BMT-H.34 High Power Polyester Resin Anchor Grout: Rapidstrong Grout AG/Anchorset Kg 271.00
SN1 or Zorifix or Equivalent. (Yield 0.5 Ltrs / 1 Kg Pack )
275 BMT-H.35 High strength, high polyester resin grouts – Rapidstrong AG Pride/Anchorset Kg 503.00
SN2 or Zorifix XL or Equivalent. ( Yield 0.5 Ltrs / 1 Kg Pack )
276 BMT-H.36 Non-metalic Floor Hardeners : Rapidstrong NH/Flortop SNC or Zorifloor DH Kg 37.00
or Equivalent. ( Coverage : May be applied at rate 3.5 Kgs /m2 over green
concrete for normal traffic & 6-12 Kg / M2 for heavy traffic. Higher
application rates yield better abrasion resistance)
277 BMT-H.37 Non oxidizing, heavy duty metallic Floor Hardeners:Rapidstrong FM/ Flortop Kg 30.00
SNS or Zorifloor NH or Equivalent.
278 BMT-H.38 Epoxy Floor coating: Procoat SNF or Food neutral Epoxy waterproof / Kg 526.00
damproof coating : Roofcare EP/ Zoricoat EP or Equivalent. (Coverage : 70
to 80 SFT / Per Ltr / coat)
279 BMT-H.39 Polysulphide modified epoxy coatings: Procoat SNS or Roofcare EPS/Zoricoat Kg 527.00
EPS or Equivalent (Coverage : 250 to 300 Gms / M2 and forms a DFT of 175 to
200 Micron)
280 BMT-H.40 Essenputty SNE or Epoxy putty - Roofcrete Putty EP/ Zoriputty EP or Kg 311.00
Equivalent
281 BMT-H.41 Zincrich epoxy resin primer - Roofguard ZP/Procoat SNZ or Zoriguard ZP or Kg 458.00
Equivalent (Coverage : 4-5 Sq.Mtr. /Ltr / Coat)
282 BMT-H.42 Chemical resistance, fungus resistance water based polyurethane sterile Pack 803.00
coating : Roofcare PU/ Procoat SNL or Zoristerile or Equivalent ( Coverage :
60 to 65 SFT / 2 Coats / Ltr)
283 BMT-H.43 Solvent free chemical resistant Epoxy self leveling (for food and Kg 314.00
pharmaceutical industry) Flooring system: Armstrong FL-SL/Flortop SNSL or
Zorifloor SL or Equivalent. ( 8.25 to 0.30 M2 / Kg mix with 2mm thickness )
284 BMT-H.44 Self leveling self smoothing water based epoxy floor topping : Armstrong FL- Kg 318.00
SLW/Flortop SNSL-SPL or ZORIFLOOR SLW - 1.5- 3mm or Equivalent (Coverage
: 4.5m2 / 17 Kg Pack @ 2mm thickness depending on the substrate)
27
SS RATE
Sl.
No
2014-15
285 BMT-H.45 High build heavy duty epoxy resin floor coating : Armstrong HBF/ Flortop Kg 336.00
SNM or Zorifloor HB or Equivalent. (Coverage : Base coat 10- 12 m2/ 5 Kg @
250 microns DFT )
286 BMT-H.46 Epoxy based repair mortar / concrete : Roofcrete EP/ Flortop SNFM or Litre 426.00
Zoricrete EP or Equivalent.
287 BMT-H.47 Solvent free Epoxy resin primer for floor coatings : Florcoat SNP or Roofbond Pack 509.00
EP Primer/ Zoriprime EP or Equivalent. (Coverage : 3 Kg unit covers about
13m2 for DFT of about 120 micron.)
288 BMT-H.48 Solvent free epoxy resin primer for protective coatings – Procoat SNC or Pack 530.00
Roofbond EPF Primer/ Zoriprime EPF or Equivalent (Coverage : 3 Kg unit
covers about 13m2 for DFT of about 120 micron.)
289 BMT-H.49 Epoxy Primer for floor coatings and protective coatings - Procoat SNP or Pack 589.00
Roofbond EFC Primer/ Zoriprime EFC or Equivalent.
290 BMT-H.50 Epoxy primer for Hibond floor & protective coatings : Procoat SNP2 or Pack 777.00
Roofbond EFC2 Primer/ Zoriprime EFC 2
291 BMT-H.51 Cementitious Micro concrete Repair products: Repcrete SNC or Roofcrete Kg 36.00
MC/Zoricrete MC or Equivalent.
292 BMT-H.52 Repair Products:Repcrete SNE1 or Epoxy mortar - Roofcrete EP/Zoricrete EPM Kg 536.00
or Equivalent
293 BMT-H.53 Under water epoxy resin system for repair products : Repcrete SNW or Kg 940.00
Roofcrete EUW/Zoricrete EUW or Equivalent.
294 BMT-H.54 Under water epoxy resin system mortar – Repcrete SNW Mortar or Roofcrete Kg 910.00
EUW/Zoricrete EMU
295 BMT-H.55 Fast setting cement based plugging compound - Uniplug SN or Wonderseal Kg 86.00
Plug/Zoriplug or Equivalent ( Powder Form : mix with water direct
application )
296 BMT-H.56 High durable cementitious acrylic based two pack Waterproofing systems : Kg 134.00
Aqua coat SNF or Roofbond RFX/Zoricoat RX or Equivalent. (12 – 14 m2 in
two coats to achieve 1mm thickness )
297 BMT-H.57 Water Repellents: Aquarepel SN1 or Water based silicon water repellent, Litre 723.00
Nano technology - Rain care WR/ Zoripel WB or Equivalent
298 BMT-H.58 Tile Adhesives: Tilegrip SNU or Tilex/ Zorimix or Equivalent. (At 3mm Kg 18.00
thickness 7-9 Sqm / 25 Kgs )
299 BMT-H.59 Acrylic based Bonding Adhesives: Conbond SNA or Roofbond PB/ Zoribond PB Litre 150.00
or Equivalent. (Mix: 1:1 ratio of cement 50 SFT / Ltr /coat depending on the
substrate)
300 BMT-H.60 Epoxy based Bonding adhesive: Conbond SNE or Roofbond EP/Zoribond EP or Pack 884.00
Equivalent. (Coverage : 20 – 25 SFT / Kg /Coat)
301 BMT-H.61 Supply of anti-corrosion admixture inhibitor liquid as per Central Electro Litre 315.00
Chemical Research Institute developed specification and licensee of Concare
or Concare Plus or Equivalent (300 ml to 500 ml per Bag of 50 Kgs Cement)
302 BMT-H.62 HI-BOND: Concrete Plasticizers: HI-PLAST 01 or Roofbond High plast ( Dosage Litre 161.00
: 100 ml Per Bag of 50 Kgs Cement)
303 BMT-H.63 Concrete Plasticizers: HI-PLAST 02 or Roofbond High plast – 2 (Dosage : 200 ml Litre 107.00
per bag of 50 Kgs Cement)
304 BMT-H.64 Concrete Plasticizers: HI-PLAST PA or Roofbond AC Litre 109.00
305 BMT-H.65 Super Plasticizers: HI-PLAST SP or Roofbond SP 30 Litre 88.00
306 BMT-H.66 Super Plasticizers: HI-PLAST SP AR or Roofbond SP 40 Litre 109.00
307 BMT-H.67 Accelerating Plasticizers: HI-PLAST AR or Concrete plasticizing, water reducing Litre 88.00
and accelerating admixture - Roofbond PA (Dosage: 500 ml to 1000 ml Per Bag
28
SS RATE
Sl.
No
2014-15
of 50 Kgs Cement) or Equivalent.
308 BMT-H.68 Retarding Plasticizers: HI-PLAST RT or Roofbond RT 30 Litre 86.00
309 BMT-H.69 Air Entraining Agents: HI-PLAST A.E or Roofbond AEA Litre 161.00
310 BMT-H.70 Retarding Super Plasticizers: HI-PLAST SP RT or Roofbond SR 30 Litre 107.00
311 BMT-H.71 HI-PLAST RSP or Roofbond SR 40 or Equivalent. Litre 118.00
312 BMT-H.72 Mortar Plasticizers: HI-PLAST MP or Roofbond MP ( Dosage : 100 ml Per Bag Litre 171.00
of 50 Kgs Cement)
313 BMT-H.73 Integral Water Proofing compounds: HI-PROOF (L) or Liquid Concentrated Litre 96.00
Micronized Cement Waterproofing Compound : Roofguard 500/Roofbond
500 (Dosage : 500 ml per bag of 50 Kgs Cement) or Equivalent.
314 BMT-H.74 HI-PROOF (P) or Conproof P/Roofbond - P or Equivalent ( Dosage : 1 Kg Per Kg 27.00
Bag of 50 Kgs Cement).
315 BMT-H.75 or Roofbond 750 or Equivalent Litre 75.00
316 BMT-H.76 Block Admixtures: HI-ADMIX or Roofbond BA or Equivalent ( Dosage : 20 ml Litre 24.00
Per bag of 50 Kgs Cement)
317 BMT-H.77 Sprayed Concrete Accelerators: HI-ACCEL or Roofbond SA or Equivalent. ( Kg 64.00
Dosage : 50 Grams to 1 Kg Per Bag of 50 Kgs Cement)
318 BMT-H.78 Surface Treatments curing compounds: HI-CURE 01 or Roofex WB /Roofcoat/ Litre 509.00
Zoricoat
319 BMT-H.79 Surface Treatments Polyurethane curing compounds: HI-CURE 02 or Roofex Litre 321.00
WXB/ Roofcare PU/ Zoricoat PU
320 BMT-H.80 Surface Treatments Crystalline Repair Products: HI-CRM or Roofex GP2 or Kg 34.00
Zoripex Equivalent
321 BMT-H.81 Polyurethane Sealent - Roofseal PU/ Zoriseal PUHI-CRM EX or Roofex EC or Kg 736.00
Equivalent
322 BMT-H.82 Polyurethane Sealent - Roofseal PS/ Zoriseal PS/HI-CRM EXW or Roofex EW or Kg 669.00
Equivalent.
323 BMT-H.83 HI-CRM EX M or Structural graded polymer modified reinstatement Kg 84.00
concrete / mortar – Roofcrete AR/ Zoricrete CMG or Equivalent
324 BMT-H.84 Water Proofing: HI-SHIELD or Liquid applied single component, elastomeric Litre 375.00
waterproofing membrane coating with -Rain seal/ Zoricoat XL or Equivalent.
(Coverage : 50 to 60 SFT Per Ltr / Coat ) ( for brush / spray application add
20% water per Ltr ) As a primer coat application dilute with water @ of 1 : 1
ratio recommended.
325 BMT-H.85 Water Repellents: HI-REPEL or Solvent based silicon water repellent Litre 348.00
compound - Roofcare WR/Zoripel SB or Equivalent. (Direct application )
326 BMT-H.86 Tile Adhesives: HI-ADHESIVE or High strength tile adhesive ( tile on tile) : Tilex Kg 24.00
Grout Hi- Grip/ Zorimix Hi-Grip or Equivalent. ( At 3mm thickness 7-9 Sqm /
25 Kgs )
327 BMT-H.87 Supply of Concare-XL Anti Corrosion and leak proof Crack Proof ,Water Proof Litre 295.00
,Concrete Hardener Admixture liquid Dosage (200 ml to 250 ml per Bag of
Cement
328 BMT-H.88 HI-FIX HFE or Epoxy tile mortar - Tilex EH/ Zorimix EH or Equivalent Pack 139.00
329 BMT-H.89 HI-BOND Wall Putty Normal or Grey cement based Gypsum Plaster – Kg 14.00
Wallstrong GP/Zoritek GP or Equivalent (Coverage : 35 to 40 SFT per bag of 40
Kgs Pack)
330 BMT-H.90 HI-BOND Wall Putty Fine or Portland cement based plaster finish surface for Kg 15.00
interior – Wallstrong PC/ Zoritek PC or Equivalent.
29
SS RATE
Sl.
No
2014-15
331 BMT-H.91 HI-BOND Wall Putty Super Fine or Acrylic based ready to use surface (white Kg 16.00
/ off white) -Wallstrong WC/ Zoritek WC or Equivalent. (At 1.5 to 2mm
thickness 100 - 125 SFT Per Bag of 25 Kgs Pack )
332 BMT-H.92 HI-BOND Wall Putty Super Fine (Water Resistant) or Smooth crack free, Kg 42.00
water resistant finish plaster Wallstrong WP/ Zoritek WP or Equivalent
333 BMT-H.93 POLY-SULPHIDE, BITUMINOUS HOT SEALING COMPOUND: Grade 'A' I.S.I 1 Kg 96.00
excluding ST or Rainseal BS/ Zoriseal BS Grade ‘A’ or Equivalent
334 BMT-H.94 Bitumen solution primer of approved quality: Rainseal BT primer/ Zoriprime 1 Kg 86.00
BT or Equivalent.
335 BMT-H.95 Tarfelt Rainseal Felt/ Zorifelt BT Type : 2 Grade : 1 or Equivalent 1 sqm 129.00
336 BMT-H.96 Supply and application of Liquid admixture for concrete with high resistance 1 Litre 99.00
against water ingress and having surface active agents & refined
lignosulphonate Rheomac 707 of BASF
337 BMT-H.97 Supply and application of two component acrylic modified cementitious 1 Kg 74.00
system for forming coating to waterproof and resurface concrete, masonry
and other construction materials waterproof and flexible coating MASTERSEAL
550 GREY of BASF
338 BMT-H.98 Supply and application of Elastomeric flexible two component polymers 1 Kg 88.00
modified cementitious system for forming waterproof coating on concrete,
masonry & other construction material up to 2mm thick MS550 EL membrane
and reinforced with 100% virgin polypropylene woven fabric MASTERSEAL 550
EL of BASF
339 BMT-H.99 Supply and application of grey cementitious powder polymer additive and 1 Kg 22.00
cement-based adhesive for fixing ceramic & vitrified wall and floor tiles, quarry
tiles and similar materials MASTERTILE 25 of BASF
340 BMT-H.100 Supply and application of premixed, non-metallic, ready to use powder, 1 Kg 22.00
designed for application as a dry shake over freshly floated concrete floors or
floor screeds to obtain a monolithic floor with enhanced abrasion resistance
MASTERTOP 100 (GREY) of BASF
341 BMT-H.101 Supply and application of synthetic polymers to impart rheoplastic qualities to 1 Kg 67.00
concrete RHEOBUILD 920 (SH) of BASF
342 BMT-H.102 Supply of Concare-Plus Admixture Anti Corrosion and leak proof Weather 1 Litre 268.00
Proof, Concrete Hardener Admixture.Dosage (200 ml to 250 ml per Bag of
Cement )
343 BMT-H.103 Supply of Concare-LP polymer based, leak proof, Admixture liquid, dosage (250 1 Litre 193.00
ml to 300 ml per Bag of Cement )
344 BMT-H.104 Supply Con- life –Water Proof, Leak Proof, Concrete Hardener, Rust Proof, 1 Litre 289.00
Admixture Liquid Dosage (200 ml to 250 ml per Bag of Cement )
345 BMT-H.105 Supply of Contech – 2000 bio Product (Powder) Anti Corrosion leak proof, 1 Kg 311.00
Crack Proof ,Chemical Resistant, whether proof, inhibitor liquid. Dosage (5 to
10% of cement weight Cement ) and 15% in serve environmental Condition
like marine structures / coastal structures and chemical structures,Godowns,
effect
346 BMT-H.106 Supply of Con – Cura Self Curing Agent Admixture for Concrete. Dosage (100 1 Litre 1,285.00
ml – 250ml per bag (50kgs) of cement depending on the atmospheric
temperature and humidity)
347 BMT-H.107 Supply of Con – Grout Epoxy Pourable Crack / Gap Filling Grout System. 1 Kg 3,535.00
Dosage (Varies with climate, Site / Substrate Status. Average density is 1.20 Kg
/ ltr (System)
30
SS RATE
Sl.
No
2014-15
348 BMT-H.108 Supply of Con Mix – XL Liquid super Plasticizer And Waterproofing With Anti 1 Litre 482.00
Corrosive properties. Dosage (100 Ml – 1ltr Per bag (50Kg)of Cement) Dosage
Should be finalized after initial site trials
I GLASS
349 BMT-I.01 Plain Float Glass 4 mm thick 1 sqm 441.00
350 BMT-I.02 Plain Float Glass 5 mm thick 1 sqm 558.00
351 BMT-I.03 Plain Float Glass 6 mm thick 1 Sqm 693.00
354 BMT-I.06 Plain Float Glass 12 mm thick 1 Sqm 1,177.00
355 BMT-I.07 Tinted - Bronze/ Green Glass 4 mm thick 1 sqm 515.00
356 BMT-I.08 Tinted - Bronze/ Green Glass 5 mm thick 1 sqm 644.00
357 BMT-I.09 Tinted - Bronze/ Green Glass 6 mm thick 1 Sqm 772.00
358 BMT-I.10 Tinted - Bronze/ Green Glass 8 mm thick 1 Sqm 1,104.00
361 BMT-I.13 Pin headed Glass 4 mm thick 1 sqm 331.00
362 BMT-I.14 Pin headed Glass 5 mm thick 1 sqm 430.00
363 BMT-I.15 Frosted / Ground Glass 4 mm thick 1 sqm 594.00
364 BMT-I.16 Frosted / Ground Glass 5 mm thick 1 sqm 747.00
365 BMT-I.17 Toughened Plain Glass 5 mm (including Glass) 1 sqm 895.00
366 BMT-I.18 Toughened Plain Glass 6 mm (including Glass) 1 sqm 1,034.00
J PAINTS & POLISHES
370 BMT-J.01 Supply of water based Cement Primer of Interior Grade- 1 1 Kg 144.00
371 BMT-J.02 Supply of water based Cement Primer of Exterior Grade- 2 1 Kg 86.00
372 BMT-J.03 Supply of Red Oxide Primer Paint for iron works of Grade -1 1 Litre 130.00
373 BMT-J.04 Supply of Zinc Chromate Yellow Oxide Primer paint for iron works 1 Litre 187.00
374 BMT-J.05 Supply of Wood Primer 1 Litre 145.00
375 BMT-J.06 Supply of Metal paste (Putty) for steel works 1 Kg 145.00
376 BMT-J.07 Supply of Putty for wood work 1 Kg 145.00
377 BMT-J.08 Supply of White Lead 1 Kg 104.00
378 BMT-J.09 Supply of Synthetic clear Varnish 1 Litre 145.00
379 BMT-J.10 Supply of Spirit 1 Litre 102.00
380 BMT-J.11 Supply of Linseed Oil 1 Litre 58.00
381 BMT-J.12 Supply of thinner for melamine polish/ french polish 1 Litre 134.00
382 BMT-J.13 Supply of thinner for Poly-urethene polish 1 Litre 274.00
383 BMT-J.14 Supply of French Polish 1 Litre 190.00
384 BMT-J.15 Supply of ready made Wax Polish 1 Kg 578.00
385 BMT-J.16 Supply of Melamine Polish 1 Litre 320.00
386 BMT-J.17 Supply of Interior Grade Poly-Urethene Polish 1 Litre 651.00
387 BMT-J.18 Supply of Exterior Grade Poly-Urethene Polish 1 Litre 796.00
388 BMT-J.19 Supply of wood adhesive compound 1 Kg 226.00
389 BMT-J.20 Supply of Dry Powder Distemper 1 Kg 43.00
390 BMT-J.21 Supply of acrylic based Oil Bound washable Distemper having VOC (Volatile 1 Kg 87.00
Organic Compound ) content less than 50 grams/ liter
31
SS RATE
Sl.
No
2014-15
391 BMT-J.22 Supply of synthetic polymer plastic emulsion paint having VOC (Volatile 1 Litre 261.00
Organic Compound ) content less than 50 grams/ liter.
392 BMT-J.23 Supply of synthetic polymer luxury plastic emulsion paint of superior grade 1 Litre 434.00
having VOC (Volatile Organic Compound ) content less than 50 grams/ liter.
393 BMT-J.24 Supply of Water proof Cement paint 1 Kg 50.00
394 BMT-J.25 Supply of acrylic exterior emulsion paint having VOC (Volatile Organic 1 Litre 196.00
Compound ) content less than 50 grams/ liter.
395 BMT-J.26 Supply of water proof Cement paint pack 25 Kg 1,185.00
396 BMT-J.27 Supply of paint grade white lime for wash 25 Kg 552.00
397 BMT-J.28 Supply of anti-corrosive grade - 1 bitumen paint of black colour 1 Litre 522.00
398 BMT-J.29 Supply of grade-1 aluminium paint 1 Litre 261.00
399 BMT-J.30 Supply of ready mixed Synthetic Enamel paints in all shades Grade - I having 1 Litre 253.00
VOC (Volatile Organic Compound ) content less than 50 grams/ liter.
400 BMT-J.31 Supply of ready mixed Synthetic Enamel paints in all shades Grade - II having 1 Litre 193.00
VOC (Volatile Organic Compound ) content less than 50 grams/ liter.
401 BMT-J.32 Deleted
409 BMT-J.40 Supply of wall putty of White Cement or Polymer or Cement based 20 Kg 696.00
410 BMT-J.41 Altek / PMCC or Equivalent top coat high UV resistant exterior paint 25 Kg 1,568.00
411 BMT-J.42 Altek / PMCC / Deco orient base or Equivalent exterior Texture. 25 Kg 676.00
412 BMT-J.43 Altek / PMCC or Equivalent Gold line Exterior Texture 25 Kg 1,191.00
413 BMT-J.44 Deleted 1 Sqm Deleted
K PARTICLE BOARDS
421 BMT-K.01 Plain Particle Board: Interior Grade - 6 mm thick 1 Sqm 260.00
426 BMT-K.06 Plain Particle Board: Interior Grade - 21.4 mm thick 1 Sqm 476.00
429 BMT-K.09 Plain Particle Board: Exterior Grade- 8 mm thick 1 Sqm 327.00
430 BMT-K.10 Plain Particle Board: Exterior Grade-12 mm thick 1 Sqm 363.00
432 BMT-K.12 Plain Particle Board: Exterior Grade-21.4 mm thick 1 Sqm 558.00
32
SS RATE
Sl.
No
2014-15
434 BMT-K.14 Plain Particle Board: Exterior Grade-35 mm thick 1 Sqm 1,034.00
435 BMT-K.15 Melamine faced Single Deco PPB- 8 mm thick 1 Sqm 676.00
438 BMT-K.18 Melamine faced Single Deco PPB- 25 mm thick 1 Sqm 1,007.00
439 BMT-K.19 Melamine faced Single Deco PPB- 35 mm thick 1 Sqm 1,675.00
440 BMT-K.20 Melamine faced Twin Deco PPB- 8 mm thick 1 Sqm 778.00
441 BMT-K.21 Melamine faced Twin Deco PPB- 12 mm thick 1 Sqm 889.00
442 BMT-K.22 Melamine faced Twin Deco PPB-18 mm thick 1 Sqm 1,028.00
445 BMT-K.25 Natural Colour-Insulating Board - 12 mm thick 1 Sqm 252.00
448 BMT-K.28 White Insulating Board - 12 mm thick 1 Sqm 307.00
451 BMT-K.31 Extra for veneered particle Board with commercial veneering on both sides. 1 Sqm 150.00
452 BMT-K.32 Extra for veneered particle Board with Veneering on both sides with one side 1 Sqm 315.00
teak veneered and other side commercial veneered
453 BMT-K.33 Extra for veneered particle Board with Teak veneering on both sides 1 Sqm 494.00
454 BMT-K.34 Medium Fibre Board: Interior Grade - 6 mm thick 1 Sqm 411.00
459 BMT-K.39 Medium Fibre Board: Interior Grade - 25 mm thick 1 Sqm 1,257.00
462 BMT-K.42 Medium Fibre Board: Exterior Grade - 6 mm thick 1 Sqm. 559.00
465 BMT-K.45 Medium Fibre Board: Exterior Grade - 15 mm thick 1 Sqm. 1,083.00
470 BMT-K.50 MDF Board: Plain-Interior - 9 mm thick 1 Sqm 377.00
475 BMT-K.55 MDF Board: Plain-Interior - 35 mm thick 1 Sqm 1,147.00
476 BMT-K.56 MDF Board: Plain-Exterior - 9 mm thick 1 Sqm 493.00
33
SS RATE
Sl.
No
2014-15
480 BMT-K.60 MDF Board: Plain-Exterior - 30 mm thick 1 Sqm 1,147.00
481 BMT-K.61 MDF Board: Plain-Exterior - 35 mm thick 1 Sqm 1,323.00
482 BMT-K.62 MDF Board: Interior-One Side Laminated -9 mm thick 1 Sqm 591.00
486 BMT-K.66 MDF Board: Interior-One Side Laminated -30 mm thick 1 Sqm 1,262.00
487 BMT-K.67 MDF Board: Interior-One Side Laminated -35 mm thick 1 Sqm 1,346.00
488 BMT-K.68 MDF Board: Exterior-One Side Laminated -9 mm thick 1 Sqm 679.00
491 BMT-K.71 MDF Board: Exterior-One Side Laminated -25 mm thick 1 Sqm 1,010.00
494 BMT-K.74 MDF Board: Interior-Both Side Laminated -9 mm thick 1 Sqm 675.00
497 BMT-K.77 MDF Board: Interior-Both Side Laminated -25 mm thick 1 Sqm 1,097.00
500 BMT-K.80 MDF Board: exterior-Both Side Laminated -9 mm thick 1 Sqm 762.00
501 BMT-K.81 MDF Board: exterior-Both Side Laminated -12 mm thick 1 Sqm 863.00
502 BMT-K.82 MDF Board: exterior-Both Side Laminated -18 mm thick 1 Sqm 1,021.00
506 BMT-K.86 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276-6 mm thick 1 sqm 225.00
507 BMT-K.87 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 8 mm thick 1 sqm 273.00
513 BMT-K.93 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 30 mm thick 1 sqm 1,034.00
514 BMT-K.94 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 40 mm thick 1 sqm 1,382.00
515 BMT-K.95 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD-6 mm thick 1 sqm 579.00
516 BMT-K.96 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD-8 mm thick 1 sqm 626.00
517 BMT-K.97 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD- 10 mm thick 1 sqm 672.00
520 BMT-K.100 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 3. Murk 1 sqm 228.00
Standard size 8’X4’ 10’X4’- 6mm thick
34
SS RATE
Sl.
No
2014-15
525 BMT-K.105 V-Board-Cement Bonded Board - 4mm Thick 1 Sqm 159.00
534 BMT-K.114 Laminate Sheets - Glossy Finish: 1.00 mm thick 1 Sqm 403.00
537 BMT-K.117 Laminate Sheets - Mat Finish: 1.00 mm thick 1 Sqm 428.00
540 BMT-K.120 Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 450.00
541 BMT-K.121 Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 829.00
542 BMT-K.122 8 mm thick V-Designer Board 1 Sqm 407.00
543 BMT-K.123 50 mm thick V-PANEL 1 Sqm 1,071.00
544 BMT-K.124 75 mm thick V-PANEL 1 Sqm 1,285.00
L PLYWOOD
545 BMT-L.01 3 Ply - 4 mm thick Plywood(IS:303) MR Grade 1 Sqm 407.00
552 BMT-L.08 3 Ply - 4 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 465.00
557 BMT-L.13 9 Ply - 15 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 1,205.00
558 BMT-L.14 9 Ply - 19 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 1,209.00
559 BMT-L.15 3 Ply-4 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 602.00
560 BMT-L.16 5 Ply - 6 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 784.00
561 BMT-L.17 5 Ply - 9 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1,005.00
562 BMT-L.18 9 Ply - 13 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1,280.00
563 BMT-L.19 5 Ply - 9 mm thick Both sides Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1,311.00
564 BMT-L.20 9 Ply - 12 mm thick Both sides Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1,529.00
M CEILINGS, WALL PARTITIONS & WALL LININGS

565 BMT-M.01 Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 12.5 mm thick as 1 Sqm 281.00
per IS 2095 -1992
566 BMT-M.02 Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 9 mm thick as 1 Sqm 274.00
per IS 2095 -1992
35
SS RATE
Sl.
No
2014-15
567 BMT-M.03 Gypsum Board Plain sheet 12.5 mm thick as per IS 2095 -1993 1 Sqm 248.00
568 BMT-M.04 G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm 1 RM 74.00
569 BMT-M.05 G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick 1 RM 85.00
570 BMT-M.06 G.I. Intermediate Section 45 mm x 15 mm x 15 mm x 0.9 mm 1 RM 84.00
571 BMT-M.07 G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm (web) of 0.55 mm thick 1 RM 74.00
572 BMT-M.08 G.I.-Precoated Fine line Grid 25 mm x 25 mm x 0.7 mm 1 RM 41.00
573 BMT-M.09 G.I.-Precoated Fine line Grid 15 mm x 25 mm x 0.7 mm 1 RM 37.00
574 BMT-M.10 GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm thick 1 RM 54.00
575 BMT-M.11 Hot dipped GI Angle - Precoated - Grid: 19 mm x 19 mm 1 RM 40.00
576 BMT-M.12 Polyester painted GI - T Section - 24 x 32 mm 1 RM 50.00
577 BMT-M.13 Polyester painted GI - T Section - 24 x 25 mm 1 RM 45.00
578 BMT-M.14 Polyester painted GI - T Section - 24 mm x 27 mm 1 RM 46.00
579 BMT-M.15 Aluminium Angle : 24 mm x 24 mm 1 RM 26.00
580 BMT-M.16 Anodised Aluminium T Section : 24 x 24.5 x 2.4 mm 1 RM 34.00
581 BMT-M.17 Connecting Clips 1 Each 2.00
582 BMT-M.18 Rawl Plug 1 Each 2.00
583 BMT-M.19 6 mm Nylon Rawl Plug 1 Each 3.00
584 BMT-M.20 Soffit Cleats 1 Each 2.00
585 BMT-M.21 Drywall Screws - 25 mm 1 Each 2.00
586 BMT-M.22 Jointing Compound 1 Kgs 29.00
587 BMT-M.23 Jointing Paper Tape 1 RM 5.00
588 BMT-M.24 Drywall Top Coat 1 Litre 142.00
589 BMT-M.25 Universal Holding Clips 1 Each 3.00
590 BMT-M.26 4 mm Dia GI Connecting Rod 1 RM 12.00
591 BMT-M.27 2 mm Dia GI Connecting Rod 1 RM 10.00
592 BMT-M.28 14 mm - Mineral Fiber sheet 600 x 600 of Board / Tegular Edge tiles with a 1 Sqm 492.00
Humidity Resistance of 80% RH, Average NRC 0.50, Light Reflectance >80%,
Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class
1
593 BMT-M.29 15 mm - Mineral Fiber sheet 600 x 600 of Board / Tegular Edge tiles with a 1 Sqm 575.00
Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%,
1
594 BMT-M.30 16 mm - Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with 1 Sqm 619.00
a Humidity Resistance of 99% RH, Average NRC 0.60, Light Reflectance >88%,
1
595 BMT-M.31 12 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular) Edge tiles 1 Sqm 380.00
596 BMT-M.32 15 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular) Edge tiles 1 Sqm 480.00
597 BMT-M.33 Perforated wall panels ARMSTRONG channeled wood works sheets of width 1 Sqm 2,738.00
128 mm, thickness of 16mm and length 2440 mm made of a high density
particle board substrate with a laminated facing as per the approved shade/
species & finish and a melamine balancing layer on the reverse side, with a
special perforation pattern “Helmholtz” fluted perforation on the visible
surface with a minimum sag resistance of RH90 and a fire rating class of 1 as
per Part 7 of BS 476 with a “tongue-and-grooved” edges and the back of the
perforated panel is with sound absorbing non-woven acoustical fleece
36
SS RATE
Sl.
No
2014-15
598 BMT-M.34 Armstrong VARIT PUR Vinyl Flooring Sheet manufactured by Armstrong World 1 Sqm 1,254.00
Industries, Inc, of size 1.83 m width having a nominal total thickness of 2 mm
with a wearing surface impregnated polyurethane homogeneous mixture of
PVC, Plasticizers, Urethane, color pigments, filler calendared, pattern, with
wearing Resistance as per EN 660-2, Fire Resistance of more than 11kW/m2 as
per ISO 9329-1 Critical Radiant Flux, Slip resistance of R9 as per Oil Wet Ramp
test (AS 4586)
599 BMT-M.35 Vinyl Composition Floor Tiles of size 305 mm x 305 mm having an overall 1 Sqm 582.00
thickness of 2.0mm manufactured by M/s. Armstrong World Industries,
radiant flux greater than 11kW/m2 as per ISO 9329-1 , smoke resistance less
than 750% minutes as per ISO 9239.1, electrical resistance of 1010 Ohm
600 BMT-M.36 Armstrong Royal LG-1 Vinyl Flooring Sheet manufactured by Armstrong World 1 Sqm 1,711.00
Industries, Inc, of size 1.83 m width having a nominal total thickness of 2 mm
with a wearing surface impregnated polyurethane homogeneous mixture of
PVC, Plasticizers, Urethane, color pigments, filler calendared, pattern, with
wearing Resistance as per EN 660-2, Fire Resistance of more than 11kW/m2 as
per ISO 9329-1 Critical Radiant Flux, Slip resistance of R9
601 BMT-M.37 Supply of Thermocole 12 mm thick sheets 1 Sqm 26.00
602 BMT-M.38 Supply of Thermocole 19 mm thick sheets 1 Sqm 46.00
603 BMT-M.39 Supply & fixing 75mm thick metal stud partition using 12.5 mm thick Gypboard 1 Sqm 1,222.00
conforming to IS 2095-1982 screw fixed to either side to 48 mm studs of 0.55
mm thick with the 50 mm floor and ceiling channel 0.55 mm and the joints
duly finished with joint compound, paper tape and two coats Dry wall top coat
as per specification.
604 BMT-M.40 Providing wooden panelling 12 mm thick Novapan one side laminated sheet 1 Sqm 1,810.00
fixed on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance
of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x
12.7 mm) size BT wood ornamental cover beading and necessary screws,
fevicol glue complete for finished item of work.
605 BMT-M.41 Supply , manufacturing , installing of library Rack of 19 mm thick ISI marked 1 Sqm 7,750.00
commercial ply All round boxing verticals, Horizontal for depth of 609.6mm
(2'-0) and shelves with 3.5 mm thick teak veneer covered with on exposed
surface externally and internally and each panels with 6mm thick ISI
commercial ply with 3.5 mm thick teak veneer for glazed shutters teak wood
size 55 mm x 28mm with 5 mm thick glass fixed with ornamental beading and
other ornamental beading is covered as per drawing including brass hinges,
ornamental handles, ball catchers, buffers, locking system etc, and all the
commercial ply exposed edges are to be covered with 6 mm thick teak wood
lipping. All the teak veneer and teak wood and ornamental beading is coated
with polishing and a coat of melamine finish etc, complete for finished item of
work.
606 BMT-M.42 Calcium Silicate Boards - 6mm thick 1 Sqm 230.00
610 BMT-M.46 Supply and Fixing 66mm thick metal stud partition screw fixed to either side of 1 Sqm 1,290.00
48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm
and the joints duly finished with joining compound, glass fibre tape and two
coats dry wall top coat as per specification finished Item of work- using 8mm
thick Calcium silicate boards
37
SS RATE
Sl.
No
2014-15
coats dry wall top coat as per specification finished Item of work - Using
10mm thick Calcium silicate boards
coats dry wall top coat as per specification finished Item of work - Using
12mm thick Calcium silicate boards
613 BMT-M.49 Supply and fixing of wall lining fixing to GI channels of perimeter channel 1 Sqm 765.00
30mm x 27mm x 0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm
x 0.55mm thick and fixing and finishing using joint compound and glass fibre
tape complete finish as per specification without painting for finished item of
work: using 8mmthick Calcium silicate boards
work: Using 10mm thick Calcium silicate boards
work: Using 12mm thick Calcium silicate boards
616 BMT-M.52 Supply and Fixing 66mm thick metal stud partition using 2 layers of 12mm 1 Sqm 4,288.00
thick Calcium silicate boards screw fixed to either side to 48mm studs of
0.55mm thick with 50mm floor and ceiling channel 0.55mm.The boards joints
are to be staggered to avoid through passage. Ceramic wool of 50mm thick,
64kg/m3 density is to be placed in cavity of the partition. The joints duly
finished with joining compound, glass fibre tape and two coats dry wall top
coat as per specification with out painting for finished item of work
617 BMT-M.53 Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick 1 Sqm 441.00
with standard GI ceiling angles, sections perimeter channels including cost and
conveyance of all materials and labour charges etc complete
618 BMT-M.54 Supplying and fixing of false ceiling using Plaster of paris Boards 10 mm thick 1 Sqm 367.00
with standard GI ceiling angles, sections perimeter channels including cost and
conveyance of all materials and labour charges etc complete
619 BMT-M.55 Designer ceiling Cement Boards -thickness 3.2 mm 1 Sqm 259.00
620 BMT-M.56 High pressure steam cured Cement Boards 4 mm thick 1 Sqm. 138.00
629 BMT-M.65 High pressure steam cured designer Cement Boards 4 mm thick 1 Sqm. 204.00
630 BMT-M.66 High pressure steam cured designer Cement Boards 6 mm thick 1 Sqm. 300.00
38
SS RATE
Sl.
No
2014-15
631 BMT-M.67 Supply and fixing of E-board wall panelling (water, fire and Termite proof) with 1 Sqm. 837.00
frame work made of GI stud profile of size 48 x 40 10 x 0.6 mm thick placed at
every 610 mm C/C intervals fixed vertically in between floor and roof Ù’ track
of size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws and with 8
mm thick E-board / 6 mm thick E-board classic cladded around with self
tapping self embedding screws fixed at every 300 mm (centres) leaving a 3 mm
gap between two panels of width 2’-0”. The Gap will be covered with a
decorative beading. Surface will be given a smooth finish over a coat of primer.
- With 8 mm E-board
632 BMT-M.68 Supply and fixing of E-board wall panelling (water, fire and Termite proof) with 1 Sqm. 893.00
frame work made of GI stud profile of size 48 x 40 10 x 0.6 mm thick placed at
every 610 mm C/C intervals fixed vertically in between floor and roof Ù’ track
of size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws and with 8
mm thick E-board / 6 mm thick E-board classic cladded around with self
tapping self embedding screws fixed at every 300 mm (centres) leaving a 3 mm
gap between two panels of width 2’-0”. The Gap will be covered with a
decorative beading. Surface will be given a smooth finish over a coat of primer.
- With 6 mm E-board Designer
633 BMT-M.69 Supply and fixing double skin E-board partition with Frame work made of GI 1 Sqm. 1,227.00
stud profile of size 48 x 40 x 10 x 0.6 mm thick placed at every 610 mm C/C
intervals and 915 mm horizontal intervals duly fixed with self expansion
screws, the E-board of 8 mm thick cladded around with self tapping self
embedding screws fixed at every 300 mm (centres) leaving 3 mm gap between
two panels of width 2’-0” (610 mm). The gap will be covered with decorative
moulding surface will be given a smooth finish over cement primer. The rate is
inclusive of cost and conveyance of all materials and labour charges etc.
complete.
634 BMT-M.70 Providing and fixing of 50mm thick EVEREST SOLID WALL PANEL Sandwich 1 sqm 1,501.00
panels made of light Weight FRACC two 4mm thick non-asbestos fibre
reinforced cement sheets on either side of the lightweight concrete core
composed of Portland cement binders with tongue and groove arrangement.
The bottom of the panel shall be fixed to the floor channel made up of 1 mm
thick GI channels of size 14x50x25 mm fixed to the existing floor with 6x60mm
nylon self expansion screws at 600 mm C/C and top of the panel fixed with
ceiling channel made out of 1mm thick GI Channel of size 38x50x38mm duly
fixed to the existing ceiling with 6x60mm nylon self expansion screws at 600
mm C/C. All the tongue and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by applying the mixture of fly ash
and sodium silicate in between and Everest jointing compound all the exposed
joints. The rate includes cost of 50mm EVEREST SOLID WALL PANELS, G.l. Floor
and ceiling channel. The panels can be flushed by using paper tape and Everest
jointing compound all complete
39
SS RATE
Sl.
No
2014-15
635 BMT-M.71 Providing and fixing of 75mm thick EVEREST SOLID WALL PANEL Sandwich 1 Sqm. 1,922.00
panels made of light Weight FRACC two 4mm thick non-asbestos fibre
reinforced cement sheets on either side of the lightweight concrete core
composed of Portland cement binders with tongue and groove arrangement.
The bottom of the panel shall be fixed to the floor channel made up of 1 mm
thick GI channels of size 14x75x25 mm fixed to the existing floor with 6x60mm
nylon self expansion screws at 600 mm C/C and top of the panel fixed with
ceiling channel made out of 1mm thick GI Channel of size 38x75x38mm duly
fixed to the existing ceiling with 6x60mm nylon self expansion screws at 600
mm C/C. All the tongue and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by applying the mixture of fly ash
and sodium silicate in between and Everest jointing compound all the exposed
joints. The rate includes cost of 75mm EVEREST SOLID WALL PANEL panels, G.l.
Floor and ceiling channel. The panels can be flushed by using paper tape and
Everest jointing compound all complete.
636 BMT-M.72 Supply and fixing of BISONPANEL (IS 14276) false ceilingusing 8MM 1 Sqm 1,039.00
BISONPANEL with galvanized and pre painted steel T section of size 24mm x
38mm x 0.3 mm for main T duty pre punched to accept cross T section of size
24mm x 30mm x 0.3 mm duly punched at both ends for insertion into main T.
The grid size will be 610mm x 610mm. The frame work (grid) is suspended to
the roof by using G.I flat of 0.60mm or 14-gauge G.I wire with necessary fixers
to the roof and frame work. BISONPANEL lay on the grid. The cost inclusive of
necessary hardware, labor, one coat of primer (Both side) and two coats of
smooth finish on visible side.
637 BMT-M.73 Supply and fixing BISONPANEL(IS 14276) wall paneling using 10 MM 1 Sqm 1,371.00
BISONPANEL with frame work made of GI stud section of size 48mm x 35mm x
0.55mm thick placed at every 610 mm C/C intervals vertically and at 1200mm
internals horizontally fixed to the wall by means of self expansion screws and
caps. BISONPANEL is to be fixed to frame by means of self taping screws
placed at every 300 mm intervals leaving 3mm gap between two panels. The
cost inclusive of one coat of Altek primer and two coats of Altek smooth finish
and cost & conveyance of all materials, labor charges etc. complete as per the
direction of Engineer in charge.
638 BMT-M.74 Supply and fixing BISONPANEL (IS 14276) double skin partition using with 10 1 Sqm 2,003.00
MM BISONPANEL made out of G.I. track section of size 50mmx 35mm x 0.55
mm for fixing to the roof and floor and stud section of size 48mm x 35mm x
0.55mm placed in track section vertically at 610mm intervals and at 1200mm
intervals horizontally fixed to the wall by means of self expansion screws and
caps to the wall and roof. BISONPANEL is to be fixed both sides of frame work
by using self taping screws fixed at every 300mm intervals to the frame work
leaving 3 mm gap between two panels. The cost inclusive with one coat of
Alltek primer and two coats of Alltek smooth finish and cost and conveyance of
all materials to site, labor charges etc., complete as per the direction of
Engineer in charge.
639 BMT-M.75 Supply and fixing of BISONLAM double skin partition using with 10 mm 1 Sqm 2,759.00
BISONLAM made out of G.I track section of size 50 mm x 35mm x 0.55mm for
fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm
placed in track section vertically at 610mm intervals and at 1200mm internals
horizontally. The frame is fixed by means of self expansion screws and caps to
the wall / roof. BISON LAM is to be fixed both sides of the frame work by using
2mm thick electro plated CR flat section leaving 3mm gap between two
panels. The cost inclusive of cost and conveyance of all materials to sites,
other materials incidentals and labour charges as per the direction of Engineer
in charges.
40
SS RATE
Sl.
No
2014-15
640 BMT-M.76 Supply and fixing of BISONLAM wall paneling using 12MM BISONLAM with 1 Sqm 2,083.00
frame work made of G.I stud section of size 48mm x 35mm x 0.55mm thick
placed at every 610mm intervals vertically and at 1200mm internals
horizontally fixed to the wall by means of self expansion screws and caps.
BISON LAM is to be fixed to frame by means of self-taping screws placed at
every 300mm intervals leaving 3mm gap between two panels. The cost
inclusive of Conveyance of materials, Labor charges etc., complete as per the
direction of Engineer in charge
641 BMT-M.77 Supply and fixing of BISON LAM aluminum glazed partitions using 10MM 1 Sqm 3,435.00
BISONLAM and 5.00 mm thick plain glass to full height. Using with BISON LAM
to a height of 0.91 meter at bottom panel and remaining height with glass and
aluminum sections anodized to 12 to 15 microns and of sections of size 37mm
x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with
clip beading on both sides including fixing the frame to pillars by M.S. flats,
bolts and nuts including cost and conveyance of all materials etc., complete as
directed during execution.
642 BMT-M.78 Providing and fixing 50mm thick “RAJSHRI” or equivalent SEMI HEIGHT SOLID 1 sqm 2,950.00
PVC PARTITION consisting of 49mm sandwich PVC panel made out of 36mm
high density expanded polystyrene sheet(E.P.S.-Thermocole) stuck on both
side with 2mm thick plain/printed /prelam PVC rigid foam sheets reinforced
with frame work made from 35mmX5mm M.S. Angle. In between two M.S.
Angles 5mm thick plain/printed/prelam heat moulded “Rajshri” PVC ‘C’
channel of size 50X100mm with feathered edges shall be fixed on the floor &
50X75mm with feathered edges plain/printed /prelam PVC ‘C’ channel. In
between adjoining EPS sandwiched PVC partitions panel 5mm thickX75mm
width plain/printed/prelam PVC sheet feathered at edges shall be stuck on
front & back face using solvent cement etc. in places where two partitions
meet to from an ‘L’ shape the panels are joined 5mm thick
plain/printed/prelam heat moulded “Rajshri” PVC ‘L’ section of size
75mmX75mm with feathered edges shall be fixed on front & back side. This is
done to maintain the symmetry of design. An additional 5mm thick PVC strip
of 40mm width is to be stuck on the interior side of the ‘C’ Channel using PVC
solvent adhesive, complete as per direction of Engineer-in-Charge,
manufacture’s specification & drawing
643 BMT-M.79 Providing and fixing “RAJSHRI” or equivalent INSULATED PVC WALL PANELING 1 sqm 2,185.00
shall consist of PVC insulated panels having wall thickness of 1mm
/1.5mm/2mm PVC sheet and the desired thickness of EPS (dependent on the
insulation required) screwed into the wall using screws of adequate length.
The screws shall be placed at a distance of 150mm and shall be 25mm from
the edge of the insulated panel on all from sides of the panel. The PVC strips of
5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck
using solvent cement adhesive at the places where two panels are joined, so a
to cover the screw of both the panels, using solvent cement. 90 heat bent
strips of 5mm thick PVC sheets of width 75mm X75mm feathered at the edges
shall be stuck at wall joints / pillars etc. , complete as per direction of
Engineer-in-Charge, manufacture’s specification & drawing
41
SS RATE
Sl.
No
2014-15
644 BMT-M.80 Providing and fixing RAJSHRI or equivalent plain PVC rigid foam sheet wall 1 sqm 2,076.00
panelling of thickness 5mm consisting of panels having size 1220mm
X2440mm stuck on inner frame work of 25mm wide strips of 5mm thick PVC
rigid foam sheet. The strips should have in their centre a grove of 6mm width
and 2mm depth for sinking the head of the screw used to fix the strips to the
wall and should be placed vertically at equal intervals of 405/407mm centre to
c entre. The PVC strips shall be fixed to the wall using 65mm long M.S. screws
through the groove in the strip by using PVC fasteners. The distance between
two screws shall not be more than 300mm. a groove of 2mm may be left at
the joint of two panels for aesthetic looks. This framework is done for making
existing wall surface in ensured level and for sticking the wall panelling sheet
(panel) on it. The exact size of the panel and correspondingly of the grid May
be varied depending n the size of the wall. However it must ensured that a
strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be
stuck at the places where two panels are joined, using solvent cement. ,
complete as per direction of Engineer-in-Charge, manufacture’s specification &
drawing
645 BMT-M.81 Providing and fixing RAJSHRI or equivalent false ceiling consisting of 1 sqm 1,350.00
600mmX600mm, Solid PVC insulation panels having wall thickness of 1mm
thick plain PVC rigid foam sheet and EPS as defined in of desired thickness
depending on insulation required shall be insert in a frame work made using
anodized aluminium Tee section of sizes 1”X1” (25X25mm, 19 gauge or 1mm
thick) in square pattern of grid sizes of 2’X2’ (600X600mm). The aluminium
framework is supported from the ceiling with the help of G.I. hook and G.I.
wire/6mm.M.S. rods of required sizes to maintain proper level etc. the
aluminium framework is supported on side wall with the use of aluminium
1”X1” (25X25mm) angles, complete as per direction of Engineer-in-Charge,
manufacture’s specification & drawing
646 BMT-M.82 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 13 mm thick Square Edge 1 Sqm 368.00
- Fissura Fine Model
- Speckle Model
- Textura Model
649 BMT-M.85 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Standard 1 Sqm 465.00
Regular Edge
650 BMT-M.86 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Fissura Fine 1 Sqm 476.00
Model
651 BMT-M.87 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Speckle 1 Sqm 497.00
Model
652 BMT-M.88 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Textura 1 Sqm 539.00
Model
653 BMT-M.89 Supply and fixing of PVC false ceiling on MS/GI made skeleton framework. The 1 Sqm. 1,498.00
frame shall be 24 X 48mm MS tube section fixed along with the wall. The
entire frame work shall be concealed with PVC section having overall
dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue
and groove system, provided with necessary arrangements for electrical
connections, complete, for finished item of work.
654 BMT-M.90 Supply and fixing of wall panelling on the framework of wooded rippers of 24 X 1 Sqm. 1,419.00
24mm of required size. The entire framework shall be panelled with PVC
section having overall dimensions of 6 X 250mm with a wall thickness of 1mm
± 0.3mm. The panels are joined with tongue and groove system. Necessary
cut-outs for electrical connections to be provided at required places complete,
42
SS RATE
Sl.
No
2014-15
for finished item of work.
655 BMT-M.91 Supply and fixing of PVC Double Skin Partition. The entire framework shall be Sqm. 2,490.00
carried out by mild steel section having overall dimensions of 24 X 48mm with
a wall thickness of 1.2mm. The entire framework shall be concealed with PVC
section having overall dimensions of 6 X 250mm with a wall thickness of 1mm
± 0.3mm both sides. Glass provision/Door provision can be provided along the
partition wherever required. Partitions can be made full or half as per
requirement complete, for finished item of work.
656 BMT-M.92 NCL or equivalent Partitions: Supply and fixing of partitions made of seccolor
pre-painted steel (base steel as per IS 513 of 0.58 mm thick ‘D’ quality,
galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy
primer of 5-7 microns thick, finish painted with a polyester paint of 12-16
microns thick alkyd backer. Section for outer frame should be 46x52mm,
section for shutter should be 46x46mm, section for mullion should be
46x70mm, section for beading should be 18x25mm and section for middle and
bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition
should be paneled with 9mm pre-laminated particle board to a height of
0.91m from the bottom, and remaining height with 5mm thick plain glass With
Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The sections are to be
cut to length, mitre joined with corner bracket Centre mullions are to be fixed
using mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer
(EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps
made of Glass filled nylon. The above frames should be fixed to the
concrete/masonry wall by means of self expanding screws, and complete for
finished item of work.
657 BMT-M.93 Fixed Partition: Outer frame section size of 46x52mm, mullion section should 1 sqm 4,560.00
be of 46x70mm, fixed beading should be of 18x25mm.
658 BMT-M.94 Fixed Partition with Door: Outer frame section size of 46x52mm, mullion 1 sqm 5,200.00
section should be of 46x70mm, fixed beading should be of 18x25mm, section
for shutter should be of 46x46mm and section for middle & bottom should be
of size 23x130mm
659 BMT-M.95 Supply & fixing of 50 mm thick sandwiched panel of two fiber-reinforced Sqm. 1,392.00
cement sheets enclosing a lightweight concrete core composed of portland
cement, binders and a mix of silicaceous and micaceous material aggregate
having Tongue and Groove joint for partitions and walls using G.I. Flooring &
Ceiling channels, hardware, Labour, transportation, wastages, etc., as a
complete item of work excluding finishing, fittings & fixtures.
660 BMT-M.96 Supply & fixing of 75 mm thick sandwiched panel of two fiber-reinforced Sqm. 1,767.00
cement sheets enclosing a lightweight concrete core composed of portland
cement, binders and a mix of silicaceous and micaceous material aggregate
having Tongue and Groove joint for partitions and walls using G.I. Flooring &
Ceiling channels, hardware, Labour, transportation, wastages, etc., as a
complete item of work excluding finishing, fittings & fixtures.
661 BMT-M.97 Supply of sandwiched panel of two fiber-reinforced cement sheets enclosing a 1 Sqm. 964.00
lightweight concrete core composed of Portland cement, binders and a mix of
silicaceous and micaceous material aggregate panels of 50mm thick x 600mm
standard width x 2400mm, 2700mm, 3000mm & 3300mm lengths
662 BMT-M.98 Supply of sandwiched panel of two fiber-reinforced cement sheets enclosing a 1 Sqm. 1,259.00
lightweight concrete core composed of Portland cement, binders and a mix of
silicaceous and micaceous material aggregate panels of 75mm thick x 600mm
standard width x 2400mm, 2700mm, 3000mm & 3300mm lengths
43
SS RATE
Sl.
No
2014-15
Providing & fixing Pre-coated G.I. Wall angle size 22mm X 20mm X 0 .4 mm
thick of 3050mm long fixed to the brick wall/ partition at the perimeter of
ceiling with nylon sleeves and screw at 610 mm centres. Then suspending
main G…! Frame "T" section size of 32mm X 24mm X 0.30mm thick of 3600mm
long from soffit in one direction with the help of Rawl Plug and G.!. Wire/Rod
of 3mm diameter with 1220mm centres G.!. Cross "T" section of size 25mm X
24mm X 0.30mm thick of 600mm long is inserted into the slots provided in
main "T" at 600mm centres to form a grid of 600mm X 600mm. NewAGE 12/
15mm tiles of size600mm X 600mm can be laid on to the grid etc. NewAGE
tiles with a Humidity resistance of 95% RH,Average NRC 0.55 to 0.60,Light
reflectance >85% K value 0.052-0.57 ,Fire performance class O/Class 1 (BS 476)
along with surface 3 coats of white paint as directed by department officers.
663 BMT-M.99 Regular Pin Holes PH-001 (Square & Tegular Edge) 12mm 1 Sqm. 636.00
664 BMT-M.100 Fin Fisured Model FF-002 (Square & Tegular Edge) 12mm 1 Sqm. 636.00
665 BMT-M.101 Random Holes AF-003 (Square & Tegular Edge) 12mm 1 Sqm. 636.00
666 BMT-M.102 Random Pin Holes APH-004 (Square & Tegular edge) 12 mm 1 Sqm. 636.00
667 BMT-M.103 Sand Face ASF-005 (Square & Tegular Edge) 12mm 1 Sqm. 739.00
668 BMT-M.104 Regular Pin Holes PH-001 (Square & Tegular Edge) 15mm 1 Sqm. 750.00
669 BMT-M.105 Fin Fisured Model FF-002 (Square & Tegular Edge) 15mm 1 Sqm. 750.00
670 BMT-M.106 Random Holes AF-003 (Square & Tegular Edge) 15mm 1 Sqm. 750.00
671 BMT-M.107 Random Pin Holes APH-004 (Square & Tegular Edge) 15 mm 1 Sqm. 750.00
672 BMT-M.108 Sand Face ASF-005 (Square & Tegular Edge) 15mm 1 Sqm. 861.00
673 BMT-M.109 Vinyl laminated MPL Gypsum Panels 600 X 600 X 9 mm 1 Sqm. 329.00
674 BMT-M.110 Supply and fixing of wall panelling of 8 mm thick V-BOARD(IS 14862)provided 1 Sqm 921.00
with frame work made of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick
placed at every 610 mm C/C intervals fixed vertically in between floor and roof
‘U’ track of size 50 x 30 x 0.6 mm thick duly fixed with self-tapping, self-
embedding screws fixed around at every 300 mm (centres) leaving a 3 mm
gap. The Gap will be covered with a decorative beading or jointing compound.
Surface will be given a smooth finish with one coat of primer. Inclusive of all
taxes.
675 BMT-M.111 Supply and fixing of wall panelling of 10 mm thick V-BOARD(IS 14862) provided 1 Sqm 964.00
‘U’ track of size 50 x 30 x 0.6 mm thick duly fixed with self-tapping, self-
embedding screws fixed around at every 300 mm (centres) leaving a 3 mm
gap. The Gap will be covered with a decorative beading or jointing compound.
Surface will be given a smooth finish with one coat of primer. Inclusive of all
taxes.
676 BMT-M.112 Supply and fixing double skin 8mm thick V- BOARD(IS 14862) partition with 1 Sqm 1,462.00
Frame work made of GI stud profile of size 48x40x10x 0.55 mm thick placed at
every 610 mm C/C intervals and 1220 mm horizontal intervals duly fixed with
self-expansion screws, the V- Board of 8 mm thick cladded around with self-
tapping self-embedding screws fixed at every 300 mm (centres) leaving a 3
mm gap. The Gap will be covered with a decorative moulding surface will be
given a smooth finish with one coat of primer. The rate Inclusive of cost and
conveyance of all materials and labour charges etc., Complete.
44
SS RATE
Sl.
No
2014-15
677 BMT-M.113 Supply and installation of V-PLANKS(IS 14862) of size 150 x 3000 x 8mm 1 Sqm 1,093.00
manufactured by M/s. Visaka Industries Limited, on to an existing steel
structure made using Top hat profile / furring channel of 51mm web, 22mm
flange of 0.5mm thick (minimum) fastened to the plastered brick wall using
anchor bolts / anchor screws, spaced at every 2’ (610mm). V planks are
screwed to the furring channel using self-drilling screws of 8g x 25mm
(minimum) at every 2’ at distance of 15mm from the edge of the plank. V
Planks fixing is started from the bottom, followed by next plank overlapped by
25mm on to the bottom plan thereby hiding the screws perfectly and
continued up to the top. Water based cement primer should be applied to the
planks before finishing with the exterior grade paints. (up to 3 floors) Above 3
floors labour charges will be extra and steel grid will change.
678 BMT-M.114 Supply and installation of V- PLANKS(IS 14862) of size 200 x 3000 x 8mm thick 1 Sqm 1,028.00
manufactured by M/s. Visaka Industries Limited, on to an existing steel
structure made using Top hat profile / furring channel of 51mm web, 22mm
flange of 0.5mm thick (minimum) fastened to the plastered brick wall using
anchor bolts / anchor screws, spaced at every 2’ (610mm). V planks are
screwed to the furring channel using self-drilling CSK screws of 8g x 25mm
(minimum) at every 2’ at distance of 15mm from the edge of the plank. V-
Planks fixing is started from the bottom, followed by next plank overlapped by
25mm on to the bottom plan thereby hiding. the screws perfectly and
continued up to the top. Water based cement primer should be applied to the
planks before finishing with the exterior grade paints. (up to 3 floors) Above 3
floors labour charges will be extra and steel grid will change.
DRY WALL PARTITION WITH 50 MM THICK V-PANEL
679 BMT-M.115 Supply& fixing of 50 mm thick V-PANELcomprise of two 5mm thick V-Boards 1 Sqm 1,660.00
(asbestos-free fibre reinforced cement sheetsconforming toIS 14862) strongly
bonded with core material which is light weight concrete mix of Portland
cement, expanded polystyrene bead aggregates and admixture. V-Panels with
unique semi-circular Tongue & Groove Joining System provides better stability,
rapid installation and better workability. The bottom of the panel shall be fixed
to the floor channel made up of 1 mm thick GI channels of size 28x52x31 mm
fixed to the existing floor with 6x60mm nylon self-expansion screws at 600
mm C/C and top of the panel fixed with ceiling channel made out of 0.8 mm
thick GI Channel of size 31 x 52 x 31 mm duly fixed to the existing ceiling with
6x60mm nylon self-expansion screws at 600 mm C/C. All the tongue and
groove joints of the panels have to be properly cleaned and both the panels
have to be fixed by applying the jointing compound in all the exposed joints.
The rate includes cost of 50mm V-PANELS, G.l. Floor and ceilingChannel.
680 BMT-M.116 Supply& fixing of 75 mm thick V-PANELcomprise of two 5mm thick V-Boards 1 Sqm 1,982.00
(asbestos-free fibre reinforced cement sheetsconforming toIS 14862) strongly
bonded with core material which is light weight concrete mix of Portland
cement, expanded polystyrene bead aggregates and admixture. V-Panels with
unique semi-circular Tongue & Groove Joining System provides better stability,
rapid installation and better workability. The bottom of the panel shall be fixed
to the floor channel made up of 1 mm thick GI channels of size 28x77x31 mm
fixed to the existing floor with 6x60mm nylon self-expansion screws at 600
mm C/C and top of the panel fixed with ceiling channel made out of 0.8 mm
thick GI Channel of size 31x77x31 mm duly fixed to the existing ceiling with
6x60mm nylon self-expansion screws at 600 mm C/C. All the tongue and
groove joints of the panels have to be properly cleaned and both the panels
have to be fixed by applying the jointing compound in all the exposed joints.
The rate includes cost of 75mm V-PANELS, G.l. Floor and ceilingChannel.
N DOORS
45
SS RATE
Sl.
No
2014-15
681 BMT-N.01 Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the 1 Rm 325.00
size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm
rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of
150mm long brackets of 15x15mm M.S. square tube. The two vertical door
profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The
door frame shall be fixed to the wall using 65/100mm long M.S. Screws
through the frame by using PVC fasteners. A minimum of 4nos. of screws to be
provided for each vertical member & minimum 2nos. for horizontal member
etc. complete as per manufacturers specification and direction of Engineer-in-
Charge for finished item of work
682 BMT-N.02 Providing and fixing 30mm thick Solid panel PVC door shutter consisting of 1 Sqm. 2,362.00
frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm
for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat
of steel primers of approved make and manufacture. M.S. frame shall be
covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm
forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &
bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC
sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet
to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm
wide x 5mm thick PVC sheet beading on either side, and joined together with
solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent
adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s
specification & drawing for finished item of work .
683 BMT-N.03 Providing and fixing 30mm thick “RAJSHRI” or equivalent BRAND FACTORY 1 sqm 2,700.00
MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of
frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm
for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of
approved make and manufacture. MS. Frame covered with 5mm thick heat
moulded “Rajshri” Prelam Pac ‘C’ channel of size 30mm thickness, 70mm
width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle
on either side forming stiles; and 5mm thick, 95mm wide Rajshri Prelam Pac
sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on
the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac
sheet out of which 75mm shall be flat and 20mm shall be tapered on both
sides to form lock rail. Top, bottom and lock rail shall be provided either side
of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be
provided as gap insert for top and bottom rail. Panelling of 5mm thick both
side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the
stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on
inner side, and joined together with solvent cement adhesive etc. an
additional 5mm thick Pac strip of 20mm width is to be stuck on the interior
side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per
direction of Engineer – in-charge, manufacture specification and drawing.
MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of
frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm
for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall
have a coat of steel primers of approved make and manufacture. MS. Frame
covered with 5mm thick heat moulded “Rajshri” single side Prelam Pac ‘C’
channel of size 30mmX50mm to form stiles.5mm thick& 75mm wide single
side prelim Pac sheets shall be for the top, bottom and lock rails. Panelling of
5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the
front (prelam side) stiles and rails (which should have a 5mm 45 bent portion
as beading) and attached to the back(white/ivory) stiles and rails which should
46
SS RATE
Sl.
No
2014-15
have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm
thick Pac sheet beading inside the 90 bent beading. All stiles, rails and
beadings are to be joined to the panel using solvent cement etc. an additional
5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C”
channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm
wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc.
complete as per direction of Engineer –in-Charge, manufacture specification
and drawing.
685 BMT-N.05 SUPPLY & FIXING or RAJSHRI or equivalent SINGLE SIDE PRELAM SOLID 1 Rm 340.00
PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac
single side Prelam door frame of the size 50X47 mm with a wall thickness of
5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut
at two corners and joined with 2nos. of 150mm long brackets of 1515mm
MS.Square tube. The two vertical door profiles are to be reinforced with
19X19mm MS. square tube of 19guage. The door frame shall be fixed to the
wall using 65/100mm long MS. Screws through the frame by using Pac
fasteners. a minimum of 4nos. of screws to be provided for each vertical
member and minimum 2nos. for horizontal member etc. complete as per
manufacture specification and direction of Engineer-in-charge.
MADE MOULDED DOOR SHUTTER consisting of sold core single leaf flush door
of 30mm thickness, lipped with 15mm (5mmX3) thick X 30mm width on one
stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles
and bottom rails. The inner panel laminated with 2mm thick termite proof,
water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel
design in different panel and / or prelam colours on one side after routing the
moulded design on flush door and 2mm prelam Pac sheet on other side using
rubber adhesive on flush door and solvent cement adhesive on Pac lipping
etc. complete as per direction of Engineer-in-Charge, manufacture
specification and drawing
687 BMT-N.07 RAJSHRI or equivalent MOULDED PVC DOOR – WOOD FREE Providing and 1 sqm 2,475.00
fixing 30mm thick Rajshri Brand factory made Moulded door shutter- wood
free consisting of frame made out of MS. tubes 19gauge thickness and size of
25mmX25mm for stiles, top and bottom rails. MS. Frame shall have a coat of
steel primers. The inner panel shall consist of 25mm thick High density EPS
conforming to IS 4671-1984 bounded with 2mm thick termite proof, water
proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in
different plain and / or prelam colours after routing to the moulded design on
one side and 2mm plain and / or prelam Pac sheet on other side of the EPS.
The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom
(made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent
cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet
fitted along Ms. Tube for lock provision for lock height 5mm thick Pac sheet of
size 150mmX100mm fixed with upper and lower face of inner side of EPS
Panel etc. Complete as per direction of Engineer – in-Charge, manufacture
specification and drawing
MADE WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19mmX19mm for stiles and 15mm
for top, lock & bottom rails. MS. Frame shall have a coat of steel primers of
approved make and manufacture. 19mmX19mm M.S. square tubes shall be
covered with 5mm thick heat moulded “Rajshri” PVC ‘C’ channel of size 30mm
thickness, 90mm width out of which 75mm shall be flat and 15mm shall be flat
and 15mm shall be bent in 900 on the inner side to from top and bottom rail
land 130mm wide PVC sheet out of which 100mm shall be flat and 154mm
47
SS RATE
Sl.
No
2014-15
shall be bent in 900 on both side to from lock rail, 10mm(5mmX2) thick, 20mm
wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be of
G.I.wire mesh of 24gauge to be fitted in by ’C’ channel of size 35mm X10mm
on the either side in the stiles. The inner side ‘C’ channel is fixed by
19mmX19mm MS. Tube on both sides with screws. The wire mesh in top
bottom & lock rail is sealed with15mm X 15mm tube with G.I.wire
10mm(5mmX2) thick PVC strip of 25mm width is to be stuck& nails on both
side of G.I. wire mesh interior at the top, bottom & lock rail. An additional
5mm thick PVC srip of 20mm width is to be stuck on the interior side of the ‘C’
channel using PVC solvent cement adhesive etc. complete as per direction of
Engineer-in-charge, manufacturer’s specification & drawings
689 BMT-N.09 Providing and fixing “RAJSHRI” PVC door cladding to the flush doors shutters . 1 sqm 377.00
For the new doors it shall be pasted with Fevicol SSR 998 or nailed to the old
doors. complete as per direction of Engineer –in – charge, manufacturers
specification and drawing - 1 mm thick
specification and drawing - 1.5 mm thick
specification and drawing - 2.0 mm thick
692 BMT-N.12 Flush door shutters, solid bond wood block board type with teak ply on both 1 sqm 1,630.00
faces.: 25 mmthick conforming to IS:2202
695 BMT-N.15 Flush door shutters, solid bond wood block board type with commercial ply on 1 sqm 961.00
both faces.: 25 mmthick conforming to IS:2202
696 BMT-N.16 Flush door shutters, solid bond wood block board type with commercial ply on 1 sqm 1,034.00
699 BMT-N.19 Flush door shutters, solid bond wood block board type with teak veneer on 1 sqm 1,150.00
one face and commercial ply on another face (lipping): 20 mmthick conforming
to IS:2202
to IS:2202
to IS:2202
to IS:2202
to IS:2202
48
SS RATE
Sl.
No
2014-15
704 BMT-N.24 Supply and fixing of E-board door shutter with alround style “U” lipping size 15 1 Sqm. 1,180.00
x 18 x 15 mm made from 0.8 mm thick powder coated cold rolled steel profiles
with 16 mm thick E-board with necessary screws fixed at 1’-0” interval 250
mm long aldrops 2 Nos. M.S. nickel coated 250 mm long 1 No. M.S. Tower
bolts including cost and conveyance of all materials at site and applying 1 coat
of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per
approved design for finished item of work.
705 BMT-N.25 Providing and fixing frame made from 1.2 mm powder coated cold rolled steel 1 Sqm. 1,799.00
profiles of overall section size of 60 mm x 45 mm with 21 mm rivet for shutter
with necessary stiffeners hinges and screws. E-board shutter with alround Ù’
lipping of size 15 X 18 X 15 mm made from 0.8 mm thick CRCA powder coated
steel profile with 16 mm thick E-board with necessary screws fixed at every 1’-
0” interval 250 mm long aldrops 2 Nos. MS Nickel coated 250 mm long 1 No.
MS tower bolt including cost and conveyance. One coat of primer, 2 coats of
luppum and 2 coats of synthetic enamel paint as per approved colour, labour
charges etc.
706 BMT-N.26 Supply and fixing of BISONPANEL(IS 14276) cup board frames and shutters 1 sqm 2,152.00
and using 16mm BISON PANEL dulypainted both sides with one coat of primer
and two coats of synthetic / enamel paint of approved shade and brand
including fixing of hardware like M.S. powder coated Piano hinges of size
18mm x 18mm, brass ball catches, Aluminum tower bolts and handles , Godrej
locks, Fevicol, screws and nails including cost and conveyance of all materials,
labor charges, all incidental and operational charges etc., complete for finished
item of work at site as per the directions of Engineer in Charge.
707 BMT-N.27 Supply and fixing BISONPANEL (IS 14276) single door shutter using with 16MM 1 Sqm 1,813.00
BISONPANEL with all-round "U" section of size 12mmx18mmx12mm made
from 0.6 mm thick galvanized, color quoted cold rolled steel profiles with
necessary screws fixed at every 304.8 mm intervals. The cost inclusive of MS
Nickel coated Aldrops of size 255 mm long 2 Nos., 200 mm long tower bolts 1
No., 125 mm handles 2 Nos. 300 mm long "T" hinge cost and conveyance of all
materials at site and applying 1 coat primer, 1 coat of luppum and 2 coats of
synthetic enamel paint as per approved design for finished item of work.
708 BMT-N.28 Supply and fixing of BISON PANEL(IS 14276) door shutters using with 16MM 1 Sqm 2,461.00
BISONPANEL with all round style “U” size of 20mmx18mm x20mm made from
0.6mm thick galvanized pre-painted cold rolled steel profiles with BISONPANEL
separating two shutter with 30mmx18mmx30mm Stepped lipping with
necessary screws fixed at every 1’-0” (304.8mm) intervals. Ms Nickel coated
250 mm long aldrops 2 no’s, MS powder coated 250mm long tower bolt 2no’s ,
& 2no’s MS powder coated 125 mm long grip handle. Including cost and
conveyance of all materials at site and applying one coat of primer, 2 coats of
lappum and 2 coats of synthetic enamel paint as per approved design for
709 BMT-N.29 Supply and fixing of BISON LAM single door shutter using 16MM BISONLAM 1 Sqm 2,142.00
with all round section “U” size of mm thick galvanized pre-painted cold rolled
steel profiles BISON LAM with necessary screws fixed at every 1’0” ( 304.8mm)
intervals. The cost inclusive of MS Nickel coated 250mm long aldrops 2 no’s ,
MS powder coated 250mm long tower bolt 1 no’s, 2no’s MS powdercoated
125mm long grip handle, 1 no’s M.S.P.C. Door stopper. Including cost and
conveyance of all materials at site labour charges etc., complete finished item
of work.
710 BMT-N.30 Supply and fixing of BISON LAM double door shutter using 16MM BISONLAM 1 Sqm 2,777.00
with all round “U” section size of 20mm x 18mm x 20mm made from 0.6mm
thick galvanized pre-painted cold rolled steel profiles with BISON LAM
separating two shutter with 30mm x 20mm x 30mm stepped lipping with
necessary screws fixed at every 1’0” (304.8mm) intervals. The cost inclusive of
49
SS RATE
Sl.
No
2014-15
MS Nickel coated 250mm long aldrops 2no’s, MS powder coated 125mm long
grip handle, 2 no’s M.S.P.C. Door stopper. Including cost and conveyance of all
materials at site labour charges etc., complete finished item of work.
711 BMT-N.31 Doors Frames (Colour Coated Steel Sections) & Shutter using Cement Bonded 1 Sqm 3,178.00
Particle Board as per IS 14276 (Bison Panel or equivalent ) : Providing and
fixing of door frame made from cold roll formed sections made of galvanized
(Base steel as per IS277 with zinc of 120 Gms/sqm) colour coated steel
sections with total coated thickness of 1mm, primer coated with epoxy primer
coat of 5-7 microns thick, finish paint with polyester paint of 12-16 microns.
The Section for door frame is to be filled with polyurethane (P.U) form of
40kg/m3. Overall size of frame section should be of 50mm x 50mm. With
necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded
particle board shutter (Bison Panel or equivalent ) “Single Leaf” with all round
styles “U” section of size 12m x 18m x 12mm made from 0.6 mm thick
galvanized, colour coated cold rolled steel profiles with 16mm thick Cement
Bonded particle Board (Bison Panel or equivalent ) with necessary screws fixed
at every 1’-0” (304.8mm) intervals. The cost inclusive of MS nickel coated
Aldrop of size 250mm long 2nos. 200mm long tower bolt 1no., 125mm
handles 2nos., cost and conveyance of all materials at site and applying one
coat primer , one coat of luppum and two coats of synthetic enamel paint as
per approved design for finished item of work
712 BMT-N.32 Supply and fixing of BISONPANEL (IS 14276) box type cup board using 1 Sqm 3,447.00
BISONPANEL for making frame of size 100mm x 35mm using two sandwiched
16MM boards, one BISONPANEL and one BISONLAM with plain 35mm wood
lipping. The Shutters are made of 16MM thick BISONLAM (Pre-Laminated
Cement Bonded Particle Board) of approved shade inclusive of hardware like
M.S. powder coated Piano hinges of size ¾” x ¾” , Aluminum powder coated
handles of size 4” (101.6mm), Aluminum tower bolt 4” (101.6mm) Godrej
locks, screws, wood lipping and Fevicol etc., complete finish item of work.
713 BMT-N.33 Supply and fixing of BISONLAM door shutter made out of U sections of size 1 Sqm 2,139.00
12x14x12 made from 0.6mm thick pps sections with 12MM BISONLAM with
necessary screws fixed at every 1’.0”interwells. The hardware consists of
250mm long aldrop – 2 Nos.150mm Handle- 1 No , 150 mm long ms powder
coated tower bolt 1 no. nickle coated. The cost is inclusive of all incidentals,
labor transportation charges.
714 BMT-N.34 Supply and fixing of V- Board door shutter with alround style “U” lipping size 1 Sqm 1,500.00
15 x 18 x 15 mm made from 0.8 mm thick powder coated cold rolled steel
profiles with 16 mm thick V-board with necessary screws fixed at 1’-0” interval
250 mm long aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower
Bolts Including cost and conveyance of all materials at site and applying 1 coat
of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per
approved design for finished item of work.
715 BMT-N.35 Providing and fixing frame made from 1.2 mm powder coated cold rolled steel 1 Sqm 1,767.00
with necessary stiffeners hinges and screws. V- Board shutter with alround
style “U” lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA
powder coated steel profile with 16 mm thick V-board with necessary screws
fixed at every 1’-0” interval 250 mm long aldrops 2 nos. M.S. nickel coated 250
mm long 1 no. M.S. Tower Bolts Including cost and conveyance. One coat of
primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per
approved colour, labour charges etc.,.
716 BMT-N.36 Supply and fixing Sintex or equivalent doors are made out of PVC section and Sqm. 2,161.00
panels. The overall dimension of the same is 33mm X 47mm with usual
process variation and having a wall thickness of 1.5mm with a variation of ±
0.3mm. The infill is seamless hallow multi chambered PVC single panel having
50
SS RATE
Sl.
No
2014-15
an effective dimension of 762mm X 20mm having a wall thickness of 1mm ±
0.3mm complete, for finished item of work.
717 BMT-N.37 Supply and fixing PVC door frames made from extruded sections in overall 1 RM. 244.00
dimensions of 40 X 48mm having a wall thickness of 1.5mm with usual process
variation of ± 0.3mm, complete, for finished item of work.
718 BMT-N.38 Supply and fixing of V-board wall panelling (water, fire and termite resistant) 1 Sqm 921.00
‘U’ track of size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws
and with 8 mm thick V- Board / Cladded around with self tapping self
embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap
between two panels of width 2’-0”. The Gap will be covered with a decorative
beading. Surface will be given a smooth finish over a coat of primer. Inclusive
of all taxes: With 8 mm V- Board
719 BMT-N.39 Supply and fixing double skin V- Board partition with Frame work made of GI 1 Sqm 1,392.00
stud profile of size 48x40x 10x 0.6 mm thick placed at every 610 mm C/C
intervals and 915 mm horizontal intervals duly fixed with self expansion
screws, the V- Board of 8 mm thick cladded around with self tapping self
embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap
between two panels of width 2’-0”(610 mm). The Gap will be covered with a
decorative moulding surface will be given a smooth finish over cement primer.
The rate Inclusive of cost and conveyance of all materials and labour charges
etc., Complete. DOUBLE SKIN PARTITION
720 BMT-N.40 Supply and fixing of PVC cupboards for kitchen and bedrooms shall be made 1 Sqm. 4,338.00
out of multi chambered PVC sections having overall dimensions of 20 X
762mm with a wall thickness of 1.2mm ± 0.3mm. The cabinets shall be made
as per the requirements of the room with groove system. The PVC section
surface shall be plain and laminated finish to have good look, completed, for
finished item of work for SINTEX OR equivalent PVC CABINETS
721 BMT-N.41 Supply and fixing of Sintex Frontura door shutter consisting of Sintex make or 1 Sqm. 3,342.00
equivalent FRP (Fibre Reinforced Plastic) panels on either sides with
depressed panelled design for door having overall wall thickness of 1.5mm +
0.35 mm with usual process variation. The core of the door shutter shall be
filled with Polyurethane foam (PUF) injected with the help of Hydraulic
Injection method, wooden black of 35mm x 31mm shall be provided on all four
side of the door shutter. Necessary wooden blacks shall be provided to take
up necessary hard wares and fixtures etc. with steel wire mesh at the centre of
the door the rate inclusive of all taxes and finished item work. Max size:
838mm (W) x 2060mm(H) Colour GOLDEN BROWN. SINTEX FRONTURA DOOR
SHUTTER (25MM THICK)
722 BMT-N.42 Supply and fixing of sintex door shutter made from specially hotpress moulded 1 Sqm. 3,642.00
SMC (Sheet moulding compound) sheet polytherencore and PVC Frame
section. SMC sheets shall be made from SMC confirming to IS-`13410 sheets
shall have an average thickness of 1.4mm+/- 0.35mm on both sides. Core of
the door shall be filled with high density polyurethane foam injected with the
help of hydraulic injection method shutter frame to be made of PVC Extruded
section of 26mm x 47mm with a wall thickness of 1.4mm+/-0.3mm on both
sides corresponding to sintex code DWUF 305 the hardware location shall be
reinforced with special polymeric reinforcement wooden blocks of suitable
size. The corners of the shutter frame shall be reinforced with polymeric L
shaped angle size of 105 x 230mm corresponding sintex code PR-02 the lock
rail shall be made from PVC Extruded sections having overall dimensions of
26mm x 47mm x 1.4mm +/- 0.3mm on both sides. The usual process of
variation corresponding sintex code of 305 combining two nos. wooden pieces
are inserted on the periphery suitable M.S.Tube reinforcement shall be
51
SS RATE
Sl.
No
2014-15
provided on the one vertical side of shutter frame
723 BMT-N.43 Supply and fixing of Sintex Door shutter made from specially Hot Press 1 Sqm. 3,162.00
Moulded SMC (Sheet moulding compound) sheets, Polyurethane core and PVC
Frame section SMC sheets shall be made from SMC conforming to IS-13410
sheets shall have an average thickness of 1.4 mm +/- 0.35 mm on both sides.
Core of the door shutter shall be filled with high density polyurethane foam,
injected with the help of hydraulic injection method shutter frame to be made
of PVC extruded section conforming to IS: 10151: 1982 of size 26 mm x 46 mm
with a wall thickness of 1.4 mm +/- 0.3 mm on both sides corresponding to
Sintex code DWUF 305. The hardware locations shall be reinforced with
special polymeric reinforcement wooden blocks of suitable size. The corners
of the shutter frame shall be reinforced with Polymeric ‘L’ shaped angle of size
105mm x 230mm corresponding to Sintex code PR-02 the lock rail shall be
made from PVC extruded sections having overall dimensions of 26 mm x 46
mm 1.5 mm +/- 0.3 mm on both sides, with usual process variation
corresponding to Sintex code 305 combining two numbers. Wooden pieces
are inserted on the periphery. Suitable MS Tube reinforcement shall be
provided on vertical sides of shutter frame the rate inclusive of all taxes and
finished item work Colour: White & Grey
724 BMT-N.44 SINTEX ENDURA DOOR SHUTTER (26MM THICK) 1 Sqm. 1,682.00
725 BMT-N.45 Supply and fixing of door shutters made of rigid PVC extruded hollow Sqm. 1,923.00
section(Nandi or equivalent ) of 20mm X 200 mm with the wall thickness of
1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking
arrangements. The shutter frame is made of 30mm X 79mm with the wall
thickness of 1.5mm +/-0.15mm section mitre-cut and joined at 4 corners with
125mm X 225mm plastic brackets. The shutter shall be horizontally reinforced
with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the
door shutter during the fabrication of the door shutter at those points
wherever the hardware is fixed onto the door shutter.
726 BMT-N.46 Supply and fixing of door frame made of hollow extruded PVC section (Nandi 1 RM 254.00
or equivalent ) having dimensions of 40 X 57mm with the wall thickness of
2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side.
The door frame top 2 corners shall be metri-cut/ welded. PVC DOOR FRAME
(Nandi or equivalent )
727 BMT-N.47 Supply and fixing of door frame made of hollow extruded PVC section (Nandi 1 RM 200.00
or equivalent ) having dimensions of 40 X 46 mm with the wall thickness of
2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side.
The door frame top 2 corners shall be mitre cut/welded
728 BMT-N.48 Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof mesh with 1 Sqm 1,108.00
std. Spn (S.S.) fly mesh including cost and conveyance of all materials, and
labour charges etc. complete for finished item of work.: Single shutter 2'-0" x
4'-0" (609.6x1219.2mm) shutter section size 20 x 40 mm
labour charges etc. complete for finished item of work.: Double shutter 3'-0" x
4'-0" (914.4 x 1219.2mm) shutter section size 20 x 40 mm
labour charges etc. complete for finished item of work.: Double shutter 4'-0" x
4'-0" (1219.2 x 1219.2mm) shutter section size 20 x 40 mm
731 BMT-N.51 Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof mesh with 1 Sqm 944.00
Netlon fly mesh including cost and conveyance of all materials, and labour
charges etc. complete for finished item of work.: Single shutter 2'-0" x 4'-0"
(609.6x1219.2mm) shutter section size 20 x 40 mm
52
SS RATE
Sl.
No
2014-15
charges etc. complete for finished item of work.: Double shutter 3'-0" x 4'-0"
(914.4 x 1219.2mm) shutter section size 20 x 40 mm
charges etc. complete for finished item of work.: Double shutter 4'-0" x 4'-0"
(1219.2 x 1219.2mm) shutter section size 20 x 40 mm
734 BMT-N.54 Supply & fixing of Door frames made of all formed sections of 1.25mm thick 1RM 219.00
CRCA section, size should be 50x60mm with 32mm rebate. The corner of the
frame should be welded. The frame should be painted with one coat of primer
and finished painted with pure polyester paint. The frame should be provided
with approved quality butt hinges of 3 Nos. complete for finished item.:
Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x
60 mm
735 BMT-N.55 Supply & fixing of Door frames made of all formed sections of 1.25mm thick 1 RM 219.00
CRCA section, size should be 50x60mm with 32mm rebate. The corner of the
with approved quality butt hinges of 3 Nos. complete for finished item.:
Double shutter 5'-0" x 7'-0" (1524 x 2133.6mm) outer frame section size of 50
x 60 mm
736 BMT-N.56 Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick 1 RM 248.00
CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the
with approved quality butt hinges of 3 Nos. Complete for finished item of
work.: Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size
of 50 x 75 mm
737 BMT-N.57 Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick 1 RM 248.00
CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the
with approved quality butt hinges of 3 Nos. Complete for finished item of
work.: Single shutter 5'-0" x 7'-0" (1524x2133.6mm) outer frame section size
of 50 x 75 mm
738 BMT-N.58 Providing and fixing door frames fabricated from sections made of galvanized 1 RM 703.00
steel powder coated (base steel as per IS 513, galvanised as per IS 277 with
zinc of 120 grams / square metre), the factory made section are powder
coated with pure polyester powder of 50-60 microns thick with total coated
thickness of 1.25 mm, size of door frame section is of 105 x 60 mm with a
rebate of 38 mm to accommodate 35 mm thick door shutter, with groove to
insert gasket in the frame section, frame section filled with polyurethane
foam, cut to length, and joined by way of welding, each frame provided with:
a) 2mm thick MS powder coated butt hinges of 100 mm long – 3 Nos. for
single shutter, 6 Nos. for double shutter. b) CRCA electroplates stiffeners of 6
Nos. – 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts screwed to
stiffeners – 6 Nos. with split end tail. d) Nylon Aldrop Receiver – 1 No. for
single shutter frame. e)Tie Rod – 1 No
739 BMT-N.59 Providing and fixing of door frames factory made, internal door frames 1 RM 474.00
without threshold, fabricated from pre painted cold roll formed section 100
mm x 60 mm made of galvanized (base steel as per IS-513 ‘D’ quality
galvanized as per IS-277 with Zinc of 120 Gms/sqm) steel colour coated
sections with total coated thickness of 1 mm primer coated with epoxy primer
of 5-7 microns thick finish painted with polyester paint of 12-16 microns and
53
SS RATE
Sl.
No
2014-15
back coated with alkyd backer of 5-7 microns, the frame section filled with
polyurethane (PU Foam) of 40 kg/Cu.m and the sections cut to length and
mitre joined by means of 1.25 mm thick CRCA electroplated corner brackets of
size 75 x 75 mm and 1.25 mm thick electroplated stiffeners of size 150 mm for
fixing hold fasts and hinges with MS Powder coated fittings a) 6 Nos M.S. Z
Type hold fasts made of 30 mm x 3 mm MS flat of 230 mm long, 3 Nos each
size expandable PVC covered screw type fasteners b) 2.5 mm x 300 mm long
‘T’ hinges /2.5 mm x 50 mm x 50 mm x 100 mm two way but hinges (3 Nos for
single leaf or 2 Nos for Double leaf/leaf) c) 12 mm dia MS tie rod at bottom
with necessary size of nuts on either side.
740 BMT-N.60 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors 1 sqm 6,394.00
three track - only two glass shutters sliding - 95 -Series duly manufactured
using UPVC reinforced profiles of 95.50 mm x 60 mm x 2.25 mm for outer
frames, 66 mm x 42 mm x 2.25 mm for sliding door shutter frames capable of
mounting single glazing system, structurally reinforced with hot dip galvanized
up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded
through fusion welding the window sash shall be fitted with 5 mm thick clear
float glass of reputed make duly fixed with EPDM weathering seal resistant
accessories like clipping locking system made of aluminium 1 No., per set of
sashes and the system is to be installed at the site using anchor fasteners,
silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour charges for transportation,
erection at site with templates for casement sizing complete for finished item
of work
three track - two glass shutters sliding and one mesh shutter sliding- 95 -Series
duly manufactured using UPVC reinforced profiles of (108 mm x 45
mm)/(95.50 mm x 60 mm) x 2.0 mm for outer frames, (75 mm x 39 mm)/(66
mm x 42 mm) x 2.0 mm for sliding door shutter frames capable of mounting
single glazing system, structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm prefabricated & welded through
fusion welding the window sash shall be fitted with 5 mm thick clear float glass
of reputed make and mesh shutter shall be made of (48.5 mm x 30 mm))/(50
mm x 26.5 mm) x 2.0 mm uPVC profile section and fitted with nylon/polymer
mesh and rollers/pulley duly fixed with TPV Gaskets/ EPDM weathering seal
resistant accessories like clipping locking system made of aluminium 1 No.,
per set of sashes and the system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including
cost and conveyance of all materials, accessories, labour charges for
transportation, erection at site with templates for casement sizing complete
for finished item of work
three track - three glass shutters sliding - 112 -Series duly manufactured using
UPVC reinforced profiles of 112.0 mm x 60 mm x 2.25 mm for outer frames, 66
mm x 42 mm x 2.25 mm for sliding door shutter frames capable of mounting
single glazing system, structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm prefabricated & welded through
fusion welding the window sash shall be fitted with 5 mm thick clear float glass
of reputed make and fixed with EPDM weathering seal resistant accessories
like clipping locking system made of aluminium 1 No., per set of sashes and the
system is to be installed at the site using anchor fasteners, silicon rubber
sealant, easy glazing/ deglazing at site etc., including cost and conveyance of
all materials, accessories, labour charges for transportation, erection at site
with templates for casement sizing complete for finished item of work
54
SS RATE
Sl.
No
2014-15
743 BMT-N.63 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable 1 Sqm 8,009.00
doors with openable shutters duly manufactured using UPVC reinforced
profiles of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.25
mm for mullion sections as per the need and 102 mm x 60 mm x 2.0 mm for
openable shutter frame capable of mounting single glazing system structurally
reinforced with hot dip galvanized up to 50 microns of minimum thickness of
1.2 mm prefabricated & welded through fusion welding the window sash shall
be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV
Gaskets/ EPDM weathering seal resistant and accessories for openable door -
hinges of stainless steel grade 304- 3 Nos., per shutter handle with mazak alloy
casting 1 No. per shutter, locking system suitably concealed 1 No., with raiser
wedges for smooth operation and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials, accessories, labour charges for
744 BMT-N.64 Supplying and fixing door shutter, with shutter frame and infill panel made 1 Sqm 1,038.00
from PVC material conforming to IS: 10151-1982, the shutter frame made out
of PVC extruded sections having overall dimension of 47 mm x 33 mm with
wall thickness of 1.2mm + 0.3mm with usual process variation, the shutter
frame with tapered shape to provide better grip to the infill panel end to drain
out the water The Infill panel is made out of PVC Sections having Overall
Dimensions of 200 mm x 20 mm with wall thickness of 1mm + 0.2mm, the
shutter frames mitre cut and joined at the corner, by providing Polymeric “ L”
type corners to take hardware & fixtures fixed with 10-20mm counter sunk
fully threaded parallel shank steel screws, all the hardware locations
reinforced with special polymeric bars as per drawings, stickers showing
locations of different hardware pasted on the shutter, the infill panels joined
by tongue and groove method.
745 BMT-N.65 PVC Door shutter conforming to IS: 10151-1982, the infill panel made of 1 Sqm 1,235.00
seamless one piece multi chamber PVC extruded sections having overall
dimensions of 610 mm x 20 mm with wall thickness of 1mm + 0.2mm with the
top and bottom edges of the shutter covered with end cap of the size 20 mm x
11 mm with the door shutter to be reinforced with special polymeric
reinforcements as per drawing for hardware’s and fixtures. Stickers indicating
the locations of hardware will be pasted at appropriate places.
746 BMT-N.66 Providing & Fixing of Scientific Doors with metal door frames and door 1 Sqm 9,521.00
shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc
Phosphate Primer to receive any paint on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade providing high levels of scratch
resistance and durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58
mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet
pressed (roll formed) for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb kraft paper used to give the required
rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D
handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of
approved quality – 1 No, frames fixed to the concrete/masonry wall by means
of self expanding screws complete for finished item of work for Single leaf
Door
747 BMT-N.67 Providing & Fixing of Scientific Doors with metal door frames and door 1 Sqm 10,156.00
shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc
Phosphate Primer to receive any paint on site or finished with Thermosetting
55
SS RATE
Sl.
No
2014-15
Polyurethane paint of Aliphatic Grade providing high levels of scratch
resistance and durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58
mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet
pressed (roll formed) for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb kraft paper used to give the required
rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6” D
handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 6 Nos, Mortise Lock of
approved quality – 1 No, frames fixed to the concrete/masonry wall by means
of self expanding screws complete for finished item of work for Double leaf
Door
748 BMT-N.68 Moulded panel solid core flush doors using water-resistant hardwood fibre 1 Sqm 1,934.00
HDF / MDF fibre boards skins of 2.5 mm thick of Masonite or equivalent doors
- 30 mm thick
749 BMT-N.69 Moulded panel solid core flush doors using water-resistant hardwood fibre 1 Sqm 2,114.00
HDF / MDF fibre boards skins of 2.5 mm thick Masonite or equivalent doors -
35 mm thick
750 BMT-N.70 Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of 1 Sqm 1,571.00
different elegant shades doors - 30 mm thick
751 BMT-N.71 Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of 1 Sqm 1,739.00
different elegant shades doors - 35 mm thick
752 BMT-N.72 Providing & fixing 30 mm thick solid panel PVC door shutter consisting of 1 Sqm 3,030.00
frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom
rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm
thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5
mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20
mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of
10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded
/sealed to the stiles, on either side joined together with solvent cement
adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the
interior side of the C channel using solvent cement, complete as per direction
of Engineer–in–charge, manufacturers specification.
753 BMT-N.73 Supply & Fixing SOLID STEEL DOOR door shutter made out of G I Precoated 1 Sqm 1,480.00
Sheet with an average wall thickness of 0.35 mm on both sides. MS Tube
having dimensions of 19 x 19 mm is inserted along the hinge side of the door,
core of the door shutter filled with High Density Polyurethane foam injected
with the help of hydraulic injection method, four sides of the door covered
with G I Precoated Sheet and the hardware locations reinforced with suitable
wooden blocks as per drawing and stickers indicating location of the hardware
pasted at appropriate places, etc complete
754 BMT-N.74 Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door shutters with 1 Sqm 2,604.00
shutter frame and Infill panel made from PVC material, the shutter frame
made out of PVC extruded sections having overall dimensions of 6 0mm x 30
mm with wall thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of
multi chambered seamless hollow PVC extruded panel having overall
dimensions of 610 mm x 20 mm having wall thickness 1 mm ± 0.2 mm with the
shutter frame meter cut and joined at corners and all the hardware locations
reinforced with special polymeric bars as per drawing including providing
special PVC braket on hinge side, etc complete
755 BMT-N.75 deleted
56
SS RATE
Sl.
No
2014-15
756 BMT-N.76 Providing & fixing internal prelaminated PVC door frame of size 100 x 45 mm 1 RM 601.00
with a wall thickness of 5mm, made of extruded 5 mm Prelam PVC foam sheet,
mitred cut at two corners and joined with two nos. of 150mm long brackets of
15 x 15 mm MS square tube, two vertical door profiles reinforced with 40 x 20
MS Tube of 19 guage throughout the frame and the door frame fixed to the
wall using 65/100mm long MS screws through the frame by using PVC
fasteners with a minimum of 3 nos of screws provided for each vertical
member and two nos. for horizontal, etc complete as per drawing and
direction of Engineer in Charge
757 BMT-N.77 Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of 1 Sqm 11,139.00
Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D”
Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr
with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin
pass Galvanized Iron sheet formed to single rebate profile of ize 100 mm X 58
mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80
mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick
fully flush, double skin door shell with Lock Seam joints at stile edges, fitted
with in-fill of Honeycomb Kraft Paper and coated with polyester powders of
Pure polyester/ epoxy polyester or polyurethane powder for powder coating
of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to
receive any paint on site or finished with Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of scratch resistance and durability, the
Shutter provided with 6 MM clear float vision glass in Circular, Square or
Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed
flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock
with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial,
residential, cleanroom applications
758 BMT-N.78 Supply & Fixing of Stainless steel doors, frames & shutters made of stainless 1 Sqm 20,886.00
steel grade 304 of hairline finish, frame with 1.2mm thick formed to single
rebate profile of ize 100 mm X 58 mm and filled with in-fill Polyurethane foam,
the Door Shutters are with 0.80 mm thick Stainless steel Sheet formed to
provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints
at stile edges, fitted with in-fill of Honeycomb Kraft Paper, the Shutter
provided with 6 MM clear float vision glass in Circular, Square or Rectangular
shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the
frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever
Handles, Mortise Dead Bolt, etc for industrial, commercial, residential,
cleanroom applications
759 BMT-N.79 Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of 1 Sqm 13,228.00
pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with in-fill
Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass
Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin
door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb
Kraft Paper and coated with polyester powders of Pure polyester/ epoxy
polyester or polyurethane powder for powder coating of thickness 60 – 65
microns and are coated with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane paint of Aliphatic Grade
providing high levels of scratch resistance and durability, the Shutter provided
with 6 MM clear float vision glass in Circular, Square or Rectangular shapes,
Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and
shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles,
57
SS RATE
Sl.
No
2014-15
Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614
(Part2) 1992
760 BMT-N.80 Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of 1 Sqm 12,532.00
pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with in-fill
Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass
Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin
door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb
Kraft Paper and coated with polyester powders of Pure polyester/ epoxy
microns and are coated with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane paint of Aliphatic Grade
providing high levels of scratch resistance and durability, the Shutter provided
with 6 MM clear float vision glass in Circular, Square or Rectangular shapes,
Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and
shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles,
Mortise Dead Bolt, etc for 60 minutes Fire Rated door conforming to IS:3614
(Part2) 1992
761 BMT-N.81 Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of 1 Sqm 20,886.00
Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless
steel of 304 grade hairline finish sheet formed to double rebate profile of ize
143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-
fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless
steel of 304 grade hairline finish Sheet formed to provide a 46 mm thick fully
flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-
fill of Honeycomb Kraft Paper and coated with polyester powders of Pure
polyester/ epoxy polyester or polyurethane powder for powder coating of
thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to
with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door
conforming to IS:3614 (Part2) 1992
762 BMT-N.82 Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of 1 Sqm 18,209.00
Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless
steel of 304 grade hairline finish sheet formed to double rebate profile of ize
143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-
fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless
steel of 304 grade hairline finish Sheet formed to provide a 46 mm thick fully
flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-
fill of Honeycomb Kraft Paper and coated with polyester powders of Pure
polyester/ epoxy polyester or polyurethane powder for powder coating of
thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to
with Lever Handles, Mortise Dead Bolt, etc for 60 minutes Fire Rated door
conforming to IS:3614 (Part2) 1992
58
SS RATE
Sl.
No
2014-15
763 BMT-N.83 Supply & Fixing of Lead Lined Clean room doors frames and shutters made of 1 Sqm 14,995.00
Skin pass galvanized Iron sheet (Conform to Base Steel as per IS 513 “D”
Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams /
Sq.Mtr).with powder coating of thickness 60-65 Microns, frame of 1.60mm
thick galvanized steel sheet (Conform to IS 277) formed to Single/double
rebate profile of size 100mm X 58mm/ 143x58mm, door frames with a single /
multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends
on radiation level, the shutter with 1.2 mm thick Galvanized Steel Sheet
(Conform to IS 277) formed to provide a 46mm thick fully flush, double skin
door shell with Lock Seam joints at stile edges with a single / multi Layer of
Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation
level, the lead sheets extend the full width and height of the door, Lead
thickness is equal to the shielding in the adjacent wall, the door frames and
door shutters are coated with polyester powders of Pure polyester/ epoxy
microns, coated with Zinc Phosphate Primer to receive any paint on site or
finished with Thermosetting Polyurethane paint of Aliphatic Grade providing
high levels of scratch resistance and durability, hardware with Stainless Steel
Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc
complete for finished item
764 BMT-N.84 Supply & Fixing of Lead Lined Stainless steel Clean room door frames and 1 Sqm 23,671.00
shutters made of Stainless steel grade of 304 hairline finish, frame with
1.60mm (16SWG) thick hairline finish Stainless steel grade of 304 formed to
Single/double rebate profile of size 100 mm x 58mm/ 143 x 58 mm, door
frames with a single / multi Layer of Lead sheet varying thickness from 3mm
/1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick
hairline finish Stainless steel grade of 304 formed to provide a 46mm thick
fully flush, double skin door shell with Lock Seam joints at stile edges with a
single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm
depends on radiation level. The lead sheets extend the full width and height
of the door. Lead thickness is to be equal to the shielding in the adjacent wall.
Hardware can be provided with Stainless Steel Ball Bearing Butt Hinges 3 mm
thick fixed flush to the frame and shutter etc complete for fisnihed item of
work
765 BMT-N.85 Supply and fixing of V- BOARD (conforming toIS 14862) door shutter with all- 1 Sqm 1,500.00
round style “U” lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder
coated cold rolled steel profiles with 16 mm thick V-BOARDwith necessary
screws fixed at 1’-0” interval 250 mm long aldrops 2 nos. M.S. nickel coated
250 mm long 1 no. M.S. Tower Bolts Including cost and conveyance of all
materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats
of synthetic enamel paint as per approved design for finished item of work.
766 BMT-N.86 Supply and fixing of V- BOARD (conforming toIS 14862) 12 mm thick door 1 Sqm 1,285.00
shutter of size 6’0” x 2’6” withall-round style “U” lipping size 15 x 14 x 15 mm
made from 0.8 mm thick powder coated cold rolled steel profiles with
necessary screws fixed at 1’-0” interval 250 mm long aldrops 2 nos. M.S. nickel
coated 250 mm long 1 no. M.S. Tower Bolts Including cost and conveyance of
all materials at site and applying 1 coat of primer, 2 coats of luppum and 2
coats of synthetic enamel paint as per approved design for finished item of
work.
767 BMT-N.87 Providing and fixing frame made from 1.2 mm powder coated cold rolled steel 1 Sqm 1,767.00
with necessary stiffeners hinges and screws. V- BOARD (IS 14862) shutter with
all-round style “U” lipping of size 15 x 18 x 15 mm made from 0.8 mm thick
CRCA powder coated steel profile with 16 mm thick V-board with necessary
screws fixed at every 1’-0” interval 250 mm long aldrops 2 nos. M.S. nickel
59
SS RATE
Sl.
No
2014-15
coated 250 mm long 1 no. M.S. Tower Bolts Including cost and conveyance.
One coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as
per approved colour, labour charges etc.
768 BMT-N.88 Providing, supplying & fixing of glazed 2 Track -2 Panel Sliding Door made out 1 Sqm 5,684.00
of multi chambered uPVC sections with TPV gaskets having isolated drainage
and reinforced with Galvanized Iron profiles throughout the window. The
sliding outer frame having a overall size of 60 x 45 mm with reinforcement of 1
mm thickness, super sash with overall size of 39 x 75 mm with reinforcement
of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 20 x 18mm
and coextruded with gasket. Fiber Glass mesh shall be provided in mesh
shutter. Window/Door shall be provided with 6 mm plain float glass, standard
hardware & multi point locking system of Patio espagnolette. Wall thickness of
frame & sash shall be 2.0 mm
P WINDOWS
Supplying and fixing of WINDOWS with Prelaminated Cement Bonded Particle
boards and Pre-Painted Steel Sections fabricated from pre-painted Cold rolled
formed sections made of galvanized steel color coated sections (Base steel as
per IS-512 D quality, galvanized as per IS-277 with Zinc of 120 gram/sqm) with
total coated thickness of 0.58mm primer coated with epoxy primer of 5-7
microns thick, finish painted with polyester paint of 12-16 microns and back
coated with alkyd backer of 5-7 microns), sections for outer frame and centre
mullion (duly filled with PU form of 40 kg/Cum) of 60mm x 50mm, with
provision for fixing glazed shutter and the section for glazed/paneled of size 48
mm x 25 mm and another section of size 60 mm x 23 mm provided for
separating glazed and paneled portion, the section cut to length and miter
jointed with plastic corner brackets and with corner brackets for window outer
frames of 50mm x 60mm, the mullion section fixed to the frame with plastic
mullion cap and stiffener plates of size 60 mm x 50 mm made of 1.25mm thick
CRCA electroplated provided to fix window frames to concrete/masonry,
gasket for fixing glass and 10mm both sides pre-laminated cement bonded
particle board and 5 mm thick colour pin headed glass provided for glazing and
providing guard bars of 10 mm square rods duly welded at 150 mm pitch to
MS flat section of size 18 mm and 3 mm thick, and fixed to wall by means of
self expansion nylon Cap (75) and electroplated wooden screws of size 100
mm, together with aluminum powder coated fittings, A) 75mm long grip
handles 1 no per shutter, B) 75 mm long tower bolts 2 nos. per shutter, C)
Heavy duty SS Pivot hinges 2 nos per shutter, D) MS Powder coated telescopic
stay 1 no per shutter.
769 BMT-P.01 Pre Laminated Cement Bonded Particle Board WINDOWS – Single shutter 1 Sqm 4,721.00
2’0”x4’0” outer frame section size of 50mm x 60mm shutter frame section size
of 48mm x 25mm
770 BMT-P.02 Pre Laminated Cement Bonded Particle Board WINDOWS –Double shutter 3’0” 1 Sqm 4,769.00
x 4’0” outer frame section size of 50mm x 60mm shutter frame section size of
48mm x 25mm mullion section size of 50mm x 60mm for outer frame
771 BMT-P.03 Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 1 Sqm 5,206.00
3’0” x 3’0” outer frame section size of 50mm x 60mm shutter frame section
size of 48mm x 25mm Mullion section size of 50mm x 60mm for outer frame.
772 BMT-P.04 Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 1 Sqm 4,721.00
4’0”x4’0” outer frame section size of 50mm x 60mm shutter frame section size
of 48mm x 25mm Mullion section size of 50mm x 60mm for outer frame.
773 BMT-P.05 Pre Laminated Cement Bonded Particle Board WINDOWS – Center fixed both 1 Sqm 4,240.00
side openable shutters 6’0”x4’0” outer frame section size 50 mm x 60 mm
shutter frame section size of 48mm x 25mm, Mullion section size of 50mm x
60mm fixed beading section size of 12mm x 12mm.
60
SS RATE
Sl.
No
2014-15
774 BMT-P.06 Supply and fixing of openable window made out of extruded PVC section and 1 Sqm. 3,315.00
the outer frame having overall dimensions of 40 x 48 mm with a wall thickness
of 1.5 mm and the shutter frame with overall dimensions of 26 x 47 mm and
wall thickness of 1.2mm ± 0.3mm provided with 5mm glazing, the centre
mullion having over all dimensions of 25 x 32.5mm ±0.3mm, complete, for
775 BMT-P.07 Supply and fixing of two track or three track sliding window with the outer 1 Sqm. 2,953.00
frame of 58 x 45mm with a wall thickness of 1.2mm ± 0.3mm and the sliding
shutter frame made of PVC section 57 x 32mm with overall dimensions of
1.5mm ± 0.3mm provided with 5mm glazing including roller bearings and
arrestor type handle cum lock complete, for finished item of work.
Supply and fixing of pre-painted steelwindows & top hung and fixed louvered
ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm
thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated
with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of
12-16 microns thick and back coated with 5-7 microns thick alkyd backer,
section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm
section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm
and section for louvered ventilation of 33 x 56 mm Box section and the
windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for
ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the
sections cut to length mitre joined with corner brocket centre mullions fixed
using mullion cap and with handle made of high grade aluminium powder
coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate,
Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry
wall by means of self expanding screws including 10 mm square guard bars
with 6" pitch complete for finished item of work.
776 BMT-P.08 Windows: Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer frame section 1 sqm 5,848.00
size of 46 x 52 mm shutter frame section size of 46 x 46 mm
777 BMT-P.09 Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame 1 Sqm 5,848.00
section size of 46 x 52 mm shutter frame section size of 46 x 46 mm
778 BMT-P.10 Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame 1 Sqm 6,186.00
section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion
section size of 46 x 70 mm
779 BMT-P.11 Windows: Double shutter 4'-0" x 4 '-0" (1219.2x12.19.2mm) outer frame 1 Sqm 6,017.00
section size of 46 x 52 mm shutter frame section size of 46 x 46 mm
780 BMT-P.12 Windows: Double shutter 4'-0" x 4 '-0" (1219.2x1219.2mm) outer frame 1 Sqm 6,186.00
781 BMT-P.13 Windows: Double shutter 4'-6" x 4 '-6" (1371.6x1371.6mm) outer frame 1 Sqm 5,511.00
782 BMT-P.14 Windows: Centre fixed both side openable shutter 5'-0" x 4'-0" 1 Sqm 5,511.00
(1524x1219.2mm) outer frame section size of 46 x 52 mm shutter frame
section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading
(1828.8x1219.2mm) outer frame section size of 46 x 52 mm shutter frame
61
SS RATE
Sl.
No
2014-15
(1828.8x1371.6mm) outer frame section size of 46 x 52 mm shutter frame
785 BMT-P.17 Ventilators: Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer frame section size 1 Sqm 6,411.00
of 46mm x 52 mm shutter frame section size of 46mm x 46 mm
786 BMT-P.18 Ventilators: Top Hung 4 '-0" x 2'-0" (1219.2x609.6mm) outer frame section 1 Sqm 6,411.00
size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size
of 46 x 70 mm
787 BMT-P.19 Ventilators: Top Hung 4 '-0" x 3'-0" (1219.2x914.4mm) outer frame section 1 Sqm 6,411.00
size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section
size of 46 x 70 mm
788 BMT-P.20 Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer 1 Sqm 4,386.00
frame section size of 33 x 56 mm
789 BMT-P.21 Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer 1 Sqm 4,386.00
frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
790 BMT-P.22 Ventilators: Fixed louvers 4'-0" x 3'-0" (1219.2 x 914.4 mm) (Box section) outer 1 Sqm 4,386.00
frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
Providing and fixing of Openable Windows made of pre-painted steel (Base
steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120
GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted
with a polyester paint of 12-16 microns thick and back coated with 5-7 microns
thick alkyd backer and section for outer frame of 48 x 50 mm, centre mullion
of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading
section should be 12 x 12 mm and the outer frame and mullions to have
rebate for glazed shutter with a 20 mm provision for guard bars/grills and the
sections cut to length metre joined with corner bracket, centre mullion fixed
with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges
provided per shutter and windows fitted with 5 mm thick plain float glass with
rubber gaskets including fixing the frames in concrete/masonry wall by means
of self expanding screws, Including 10mm Square guard bars with 6”
(152.4mm) pitch etc., complete for finished item of work.
791 BMT-P.23 Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame 1 Sqm 5,343.00
section size of 48x50mm shutter frame section size of 48 x 25 mm.
792 BMT-P.24 Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1 Sqm 5,680.00
1219.2mm) outer frame section size of 48x50mm shutter frame section size of
48 x 25 mm. Mullion section size of 48x50mm.
793 BMT-P.25 Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1 Sqm 5,680.00
48 x 25 mm and mullion section should be of 48x50mm.
794 BMT-P.26 Centre fixed both side openable shutter window 5’0”x4’0” (1524mm 1 Sqm 5,005.00
x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section
size of 48 x 25 mm. Mullion section size of 48x50mm. Fixed beading section
size of 12x12mm.
795 BMT-P.27 Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm 1 Sqm 5,005.00
size of 12 x 12mm.
Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted
steel (Base Steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with
zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish
painted with a polyester paint of 12-16 microns thick and back coated with 5-7
62
SS RATE
Sl.
No
2014-15
microns thick alkyd backer and the section for outer frame of 72 x 55mm,
centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12
mm and section for shutters of 48 x 25 mm and outer frame & mullion
sections with rebate for glazed shutters, fly mesh and a 20 mm provision for
guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections
cut to length metre joined with corner bracket, centre mullions fixed with
mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel pivot
hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh
for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing
the windows in the concrete/masonry wall by means of self expanding screws,
including 10mm Square guard bars with 6” (152.4mm) pitch , complete for
finished item of work
796 BMT-P.28 Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame 1 Sqm 7,085.00
section size of 72x50mm shutter frame section size of 48 x 25 mm.
797 BMT-P.29 Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1 Sqm 7,423.00
48 x 25 mm. Mullion section size of 72x50mm.
798 BMT-P.30 Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1 Sqm 7,423.00
48 x 25 mm and mullion section should be of 72x50mm.
799 BMT-P.31 Centre fixed both side openable shutter window 5’0”x4’0” (1524mm 1 Sqm 6,748.00
size of 12 x 12 mm.
800 BMT-P.32 Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm 1 Sqm 5,905.00
size of 12 x 12 mm.
801 BMT-P.33 Providing and Fixing Pre-painted steel Sliding Window fabricated from Roll 1 sqm 6,281.00
formed sections made of galvanized Steel colour coated/powder coated (Base
Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120
GM/Sq.mtr) with total coated thickness of 0.58 mm, primer coat with epoxy
primer of 5-7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with Alkyd backer of 5-7 microns or powder
coated with pure polyester powder up to 50-60 microns thick and the section
for external frame bottom of 79 x 44 mm, external frame sides and top of 69 x
24 mm, guide for top and bottom of 69 x 26 mm (Stainless Steel) and section
for shutter of 26 x 30 mm and panelled with 5mm thick plain float glass fitted
with corner bracket for internal and external frame made of glass filled nylon,
gaskets made of Ethyl Propylene Diamine Monomer (EPDM), sections cut to
length, joined and assembled by means of corner bracket, including fixing
windows in the concrete/masonry walls by means of self expanding brackets &
screws including 10mm square guard bars with 6” pitch (152.4mm) and all
taxes etc., complete for finished item of work
802 BMT-P.34 deleted
63
SS RATE
Sl.
No
2014-15
827 BMT-P.59 Supply & fixing of fly mesh shutters of size 20x40mm fly proof mesh with std. 1 Sqm 1,125.00
Spn (S.S) fly mesh including cost and conveyance of all materials, and labour
charges etc. Complete for finished item of work including of all taxes. : Single
shutter 2’-0” x 4’-0” ( 609.6 x 1219.2mm) Shutter section size 20 x 40mm
charges etc. Complete for finished item of work including of all taxes. Double
shutter 3’-0” x 4’-0” (914.4 x 1219.2mm) shutter section size 20 x 40mm
charges etc. Complete for finished item of work including of all taxes. Double
830 BMT-P.62 Supply & fixing of fly mesh shutters of size 20 x 40 mm fly proof mesh with 1 Sqm 969.00
charges etc. complete for finished item of work including of all taxes. Single
charges etc. complete for finished item of work including of all taxes. Double
shutter 3’-0” x 4’= 0” ( 914.4 x 1219.2mm) shutter section size 20 x 40 mm
charges etc. complete for finished item of work including of all taxes. Double
shutter 4’-0” x 4’-0” (1219.2 x 1219.2 mm) shutter section size 20 x 40 mm
833 BMT-P.65 Supply and fixing fly mesh window with sections made of pre painted steel 1 Sqm 4,553.00
(Base steel as per IS 513 of ‘D’ quality, Galvanized as per IS 277 with zink of
120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish
painted with a polyester paint of 12 to 16 microns thick and back coated with
5-7 microns thick alkyd baker with total coated thick ness of 0.58 mm for
shutter frame and 0.8 for outer frame, the section for outer frame of 30 x 30
mm and fly mesh shutter section of 20 x 40mm outer frame sections with
rebate for fly mesh shutters and sections cut to lengh metre jointed with
corner bracket and fitted with aluminum ‘T’ section of double shutter &
above, SS fly mesh shutter (304 grade) and EPD gasket including fixing the
frames in the concrete/ masonry wall by means of left expending screws,
64
SS RATE
Sl.
No
2014-15
latch, 2 nos of heavy duty GI pivot hinges provided per shutter (304 grade)
including all taxes complete for finished item of work.
834 BMT-P.66 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding 1 Sqm 6,391.00
windows two track sliding duly manufactured using UPVC reinforced profiles
of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x
38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of
mounting single glazing system, structurally reinforced with hot dip galvanized
up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded
through fusion welding the window sash shall be fitted with 5 mm thick clear
float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering
seal resistant accessories like locking system 1 No., per set of sashes and the
system is to be installed at the site using anchor fasteners, silicon rubber
sealant, easy glazing/ deglazing at site etc., including cost and conveyance of
all materials, accessories, labour charges for transportation, erection at site
with templates for casement sizing complete for finished item of work
windows three track - only two glass shutters sliding duly manufactured using
UPVC reinforced profiles of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.0 mm for
outer frames, (54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for sliding
shutter frames capable of mounting single glazing system, structurally
reinforced with hot dip galvanized up to 50 microns of minimum thickness of
1.2 mm prefabricated & welded through fusion welding the window sash shall
be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV
Gaskets/ EPDM weathering seal resistant accessories like locking system 1
No., per set of sashes and the system is to be installed at the site using anchor
windows three track - two glass shutters sliding and one mesh shutter duly
manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm x
52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0
mm for sliding shutter frames capable of mounting single glazing system
structurally reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion welding the
window sash shall be fitted with 5 mm thick clear float glass of reputed make
and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2
mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with TPV
Gaskets/ EPDM weathering seal resistant accessories like locking system 1
No., per set of sashes and the system is to be installed at the site using anchor
837 BMT-P.69 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement 1 Sqm 6,471.00
windows openable shutters duly manufactured using UPVC reinforced profiles
of 48 mm x 60 mm x 2.0 mm for outer frames, 64 mm x 60 mm x 2.0 mm for
mullion sections for two or more openable shutters and 78 mm x 60 mm x 2.0
mm for outward openable shutter frame or 70 mm x 60 mm x 2.0 mm for
inward openable shutter frame capable of mounting single glazing system
duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories for
65
SS RATE
Sl.
No
2014-15
casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per
sash, handle with mazak alloy casting 1 No. per sash, locking system suitably
concealed 1 No., per sash provided with raiser wedges for smooth operation
and the system is to be installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc., including cost and
of work
838 BMT-P.70 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement 1 Sqm 7,051.00
windows openable shutters duly manufactured using UPVC reinforced profiles
of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.0 mm for
mullion sections for two or more openable shutters 70 mm x 60 mm x 2.0 mm
for openable shutter frame capable of mounting single glazing system
duly fixed with TPV Gaskets/ EPDM weathering seal resistant and accessories
for casement window - friction stay hinges of stainless steel grade 304- 2 Nos.,
per sash, handle with mazak alloy casting 1 No. per sash, multipoint locking
system suitably concealed 1 No., per sash provided with raiser wedges for
smooth operation and the system is to be installed at the site using anchor
839 BMT-P.71 DELETED 1 Sqm
840 BMT-P.72 DELETED 1 Sqm
841 BMT-P.73 Galvanized powder coated Casement Windows with openable shutters duly 1 Sqm 5,685.00
manufactured using pressed steel sections in mild steel conforming to IS 513
of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface
treatment with pure polyester powder coating of 30-40 microns thick and
section for outer frame of 60x50mm, centre for mullion of 62x50mm, section
for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate
for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at
125 mm c/c the sections assembled with bolt & nut assembly with zinc-
electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2
nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per
shutter, window panes with 5 mm thick plain float glass and fixed with glass
beading section of 10x12 mm size with 0.8 mm thick powder coated
aluminium 'U' channel and window frames fixing to the concrete/masonry wall
arrangement with self expanding screws, complete for finished item of work
including of all taxes - 1220 x 1372 or below size
section for outer frame of 60x50mm, centre for mullion of 62x50mm, section
for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate
for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at
125 mm c/c the sections assembled with bolt & nut assembly with zinc-
electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2
nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per
shutter, window panes with 5 mm thick plain float glass and fixed with glass
beading section of 10x12 mm size with 0.8 mm thick powder coated
aluminium 'U' channel and window frames fixing to the concrete/masonry wall
66
SS RATE
Sl.
No
2014-15
arrangement with self expanding screws, complete for finished item of work
including of all taxes - 1530 x 1372 or above size
section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section
for glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and mullions
to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm
square guard bars provided at 125 mm c/c the sections assembled with bolt &
nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15
mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size
3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass
and fixed with glass beading section of 10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade
fixed with 18 mm x 12 mm BT wood beading and window frames fixing
arrangement to the concrete/masonry wall with self expanding screws,
complete for finished item of work including of all taxes - 1220 x 1372 or
below size
section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section
for glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and mullions
to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm
square guard bars provided at 125 mm c/c the sections assembled with bolt &
nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15
mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size
3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass
and fixed with glass beading section of 10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade
fixed with 18 mm x 12 mm BT wood beading and window frames fixing
arrangement to the concrete/masonry wall with self expanding screws,
complete for finished item of work including of all taxes - 1530 x 1372 or above
size
845 BMT-P.77 Providing & Fixing of Mesh windows made of pre-painted steel (Base Steel as 1 Sqm 4,413.00
per IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 120 GSM),
primer coated with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick and back coated with 5-7 microns thick
alkyd backer, section for outer frame of 47 x 36 mm, centre mullion of 60 x 36
mm, section mesh beading 18 x 6 mm and Fly mesh shutter section of 20 x 40
mm, the sections cut to length meter joined with corner bracket and centre
mullions fixed with mullion cap, handles, latch, 2 Nos of heavy duty stainless
steel pivot hinges per S.S. Mesh for fly mesh shutter (304 grade) including
fixing the frames in the concrete/masonry wall by means of self expanding
screws complete for finished item of work.
846 BMT-P.78 Providing & fixing white colour Rigid PVC window frame and shutter with 1 Sqm 4,378.00
single rebate using frame section of 50 x 35 mm, centre mullion 50 x 47 mm
and the thickness of shutter 25 mm thick, the frame work made of M.S. Tube
of 19 gauge of size 15 x 15 mm and solid PVC Section made of 4 mm thick (3.75
mm PVC foam sheet laminated with .25 mm rigid PVC sheet) and heat
moulded PVC “C” section of size 50 x 25 x 25 mm forming rails & stiles and
reinforced with M.S.Tube of 19 gauge of size 15 x 15 mm and suitably joined
with solvent cement and fitted with 4 mm thick glass panel with Aluminium
67
SS RATE
Sl.
No
2014-15
handles, tower bolts, hinges and stopper complete as per direction of Engineer
in-charge and manufacturers specification. (All sizes with openable shutters)
847 BMT-P.79 Providing & fixing white colour Rigid PVC window frame and shutter with 1 Sqm 7,633.00
doouble rebate (glass & mesh) using frame section of 42 x 115 mm made out
of M.S.Tube of 19 gauge 15 x 15 mm and solid PVC section made from 4 mm
thick (3.75 mm foam sheet laminated with 0.25mm rigid PVC sheet Suitably
joined using PVC solvent cement and the window shutter of 25 mm thick heat
moulded with PVC ‘C’ section of size 50 x 25x 50mm forming rails & stiles and
reinforced with with M.S.Tube of 19 gauge 15 x 15 mm and glass and wire
mesh fitted externally in the clear space available between stiles and rails and
fixed with PVC beading of size 23 mm x 16 mm complete as per direction of
Engineer in charge and manufacturers specification (All sizes with openable
shutters)
848 BMT-P.80 Providing and fixing COMPOSITE SLIDING WINDOW fabricated from roll 1 Sqm 5,511.00
formed sections made of Galvanized Steel colour Coated/Powder Coated (Base
Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams
/Sq.Mtr.) with total coated thickness of 0.58 mm, powder coated with pure
Polyester Powder up to 50-60 microns thick and the section for external frame
bottom of 68 x 25mm (Aluminium), External frame sides & Top of 68 x 25 mm
(Aluminium), section for shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm
(uPVC) cut to length and mitre joined with L-bracket and 5 mm plain float
Galss with Ethyl Propylene Diamine Monomer (EPDM) gasket, the corner
bracket for external frame made of Aluminium ‘L’-Angle, Corner Bracket for
internal frame made of Polyproylene, Crescent Latch, Rollers, & EPDM Gaskets
for shutters, wool pile for lap strip, Bump Stop Base & Rubber for shutter
stopper including fixing to brick/concrete masonry using Nylon self-expanding
caps and driving MS electroplated 80mm long screws into the caps through
frames and fixing 10mm square guard bars with 6” pitch centre to centre
(152.4mm) and all taxes completed for finished item of work
Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel
(Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120
GSM), using factory made section powder coated with Pure polyester powder
upto 50-60 microns thick with total coated thickness of 0.8 mm for Outer
Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for
Two Tracks with Grill provision size of 90 mm x 50 mm and without grill
provision is of 75 mm x 50 mm and the Window Shutter section of 58 mm x 36
mm and the outer Frame with two integrated guide tracks of 12mm width and
24mm deep for provision to slide the Shutter / sash frame and facilitates with
a water drain outlet component made of PVC and the shutter frame fitted with
5mm thick plain float glass of reputed make and fixed with EPDM weathering
seal resistant accessories and handle made of Alumimium 1 No. per each
shutter and cut to length miter joined with corner brackets including
installation of window system at site using anchor fasteners, Silicon sealant
applied at the Outer frame corners inclusive of conveyance of all materials
accessories, labour charges, and erection at site with complete finished item of
work.
850 BMT-P.81 Window with Two Sliding Shutters and without Grill Outer Frame Size 75 mm x 1 Sqm 5,302.00
50 mm.
851 BMT-P.82 Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50 1 Sqm 5,880.00
mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for
horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS flat.
Providing and fixing of Three shutter Sliding Windows made of Galvanized
Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of
120 GSM), using factory made section powder coated with Pure polyester
powder upto 50-60 microns thick with total coated thickness of 0.8 mm for
68
SS RATE
Sl.
No
2014-15
Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer
Frame for three tracks with grill provision size of 105 mm x 50 mm and without
grill provision is of 90 mm x 50 mm and the Window Shutter section of 58 mm
x 36 mm and the outer Frame with two integrated guide tracks of 12mm width
and 24mm deep for provision to slide the Shutter / sash frame and facilitates
with a water drain outlet component made of PVC and the shutter frame fitted
with 5mm thick plain float glass of reputed make and fixed with EPDM
weathering seal resistant accessories and handle made of Alumimium 1 No.
per each shutter and cut to length miter joined with corner brackets including
installation of window system at site using anchor fasteners, Silicon sealant
applied at the Outer frame corners inclusive of conveyance of all materials
accessories, labour charges, and erection at site with complete finished item of
work.
Window with 3 shutters (center fixed shutter / Center sliding shutter / center
Fly mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm
x 50 mm. Grill made of 10mm MS Square Rods for horizontal bars at a regular
pitch of 150mm welded to MS flat of 12 x 6 mm.
853 BMT-P.83 i) Center Shutter Fixed: center shutter frame made of section with size 20mm 1 Sqm 6,212.00
x 47mm should be fitted with 5mm thick plain float glass of reputed make,
EPDM gasket all around the glass and fixed to the Outer Frame with the
supporting section of size 29mm x 20mm of 0.58mm thick fixed horizontally on
top and bottom of the shutter frame.
854 BMT-P.84 ii) Center Shutter Sliding: center shutter frame made of section of size 20mm x 1 Sqm 6,801.00
47mm should be fitted with 5 mm thick plain float glass of reputed make.
The supporting guide section of size 15mm x 19mm of 0.58mm thick fixed
horizontally at top and bottom of shutter frame and slides along the bottom
and top guide tracks made of sections size 24mm x 20mm of 0.58mm thick and
29mm x 20mm of 0.58mm thick
855 BMT-P.85 iii) Center Fly mesh Shutter Sliding: Section for Fly mesh Shutter frame should 1 Sqm 6,801.00
be of size 20mm x 40mm of 0.58mm thick and fitted with SS mesh (304
Grade). The supporting guide section of size 29mm x 20mm of 0.58mm thick at
the bottom and 15mm x 19mm of 0.58mm thick at the top fixed horizontally
to the Fly mesh frame and slides along the bottom and top guide tracks made
of sections size 20mm x 20mm of 0.58mm and 29mm x 20mm of 0.58mm.
Window with 3 shutters (Center fixed shutter / Center sliding shutter / center
Fly mesh shutter) and without Grill Window made of Outer Frame of size
90mm x 50mm.
857 BMT-P.86 i) Center Shutter Fixed: center shutter frame made of section with size 20mm 1 Sqm 5,570.00
x 47mm of 0.58mm thick should be fitted with 5mm thick plain float glass of
reputed make, EPDM gasket all around the glass and fixed to the Outer Frame
with the supporting section of size 29mm x 20mmof 0.58mm thick fixed
horizontally on top and bottom of the shutter frame.
858 BMT-P.87 ii) Center Shutter Sliding: center shutter frame made of section with size 1 Sqm 6,095.00
20mm x 47mm of 0.58mm thick should be fitted with 5 mm thick plain float
glass of reputed make. The supporting guide section of size 15mm x 19mm of
0.58mm thick fixed horizontally at top and bottom of shutter frame and slides
along the bottom and top guide tracks made of sections size 24mm x 20mm of
0.58mm thick and 29mm x 20mm of 0.58mm thick.
859 BMT-P.88 iii) Center Fly mesh Shutter Sliding: Section for Fly mesh shutter frame should 1 Sqm 6,095.00
be of size 20mm x 40mm and fitted with SS mesh (304 Grade). The supporting
guide section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm
x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame
and slides along the bottom and top guide tracks made of sections size 20mm
x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick.
69
SS RATE
Sl.
No
2014-15
Providing and fixing of Openable / Casement Windows made of pre-painted
steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with
Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick
and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm,
section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to
have rebate for glazed shutter with a provision for guard bars/grills and the
sections cut to length metre joined with corner bracket, centre mullion fixed
with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2
nos. of with MS Powder coated /SS ball bearing butt Hinges provided per
shutter and windows fitted with 4 mm thick plain float glass with rubber
gaskets including fixing the frames in concrete/masonry wall by means of self
expanding screws, Including 10 mm Square guard bars with 6” (152.4mm)
pitch etc., complete for finished item of work.
860 BMT-P.89 Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer 1 sqm 5,088.00
frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm
thick
861 BMT-P.90 Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) 1 sqm 5,409.00
outer frame section size of 80 x 45mm,shutter frame section size of 52 x
25mm, vertical mullion section size of 80 x 60 mm
862 BMT-P.91 Double openable shutter window size of 4’0” x 4’0” (1219.2mm x 1219.2mm) 1 sqm 5,409.00
outer frame section size 80 x 45mm, shutter frame section size of 52 x 25 mm
,Vertical mullion section size of 80 x 60 mm
863 BMT-P.92 Double Openable Shutter and Center Fixed window of size 5’0 x 4’0 ( 1524 x 1 sqm 4,766.00
1219.2mm)outer frame section size of 80mm x 45mm, shutter frame section
size of 52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section
size of 9 x 12mm to be provided for glass holding
864 BMT-P.93 Double Openable Shutter and Center Fixed window of size 6’0 x4’0 ( 1829.6 x 1 sqm 4,766.00
1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section
size of 52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section
size of 9 x 12mm to be provided for glass holding
Note: The above rates are for normal finish, 10% extra may be allowed for
Wood Grain finish
Providing and fixing of Openable / Casement Windows with fly mesh made of
pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per
IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65
microns thick and section for outer frame of 100 x 45 mm, centre mullion of
100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-
shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge
fly mesh of 304 grade with 144 holes per sq.inch and mullions to have double
rebate for glazed shutter and fly-shutter with a provision for guard bars/grills
and the sections cut to length metre joined with corner bracket, centre
mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window
stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges
of self expanding screws, Including 10 mm Square guard bars with 6”
865 BMT-P.94 Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer 1 sqm 6,748.00
frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter
profile section size of 52 x 25mm
866 BMT-P.95 Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) 1 sqm 7,069.00
outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh
shutter profile section size of 52 x 25mm, vertical mullion section size of 100 x
60 mm
70
SS RATE
Sl.
No
2014-15
867 BMT-P.96 Double openable shutter window size of 4’0” x 4’0” (1219.2mm x 1219.2mm) 1 sqm 7,069.00
outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh
shutter profile section size of 52 x 25mm, vertical mullion section size of 100 x
60 mm
868 BMT-P.97 Double Openable Shutter and Center Fixed window of size 5’0 x 4’0 ( 1524 x 1 sqm 6,427.00
size of 52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading
section size of 9 x 12mm to be provided for glass holding
869 BMT-P.98 Double Openable Shutter and Center Fixed window of size 6’0 x4’0 ( 1829.6 x 1 sqm 6,427.00
size of 52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading
section size of 9 x 12mm to be provided for glass holding
Wood Grain finish
Providing and fixing of top hung Ventilators made of pre-painted steel (Base
steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120
GSM), finish painted with a polyester paint of 60-65 microns thick and section
for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for
shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have
rebate for glazed shutter with a provision for guard bars/grills and the sections
cut to length metre joined with corner bracket, centre mullion fixed with
mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of
with MS Powder coated /SS ball bearing butt Hinges provided per shutter and
windows fitted with 4 mm thick plain float glass with rubber gaskets including
fixing the frames in concrete/masonry wall by means of self expanding
screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc.,
complete for finished item of work.
870 BMT-P.99 Single openable ventilator shutter size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer 1 sqm 6,105.00
frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm
thick
871 BMT-P.100 Double openable ventilator shutter Size of 4’ 0” x 2’ 0” (1219.2mm x 1 sqm 6,105.00
609.6mm) outer frame section size of 80 x 45mm,shutter frame section size of
52 x 25mm, vertical mullion section size of 80 x 60 mm
872 BMT-P.101 Double openable fix shutter size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer 1 sqm 6,105.00
frame section size of 80 x 45mm , shutter frame section size of 52 x 25 mm
,Vertical mullion section size of 80 x 60 mm
873 BMT-P.102 Single fixed Louvers Ventilator size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer 1 sqm 4,177.00
frame box section size of 80 x 45mm
874 BMT-P.103 Double fixed Louvers ventilator Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) 1 sqm 4,177.00
outer frame box section size of 80 x 45mm, vertical mullion section size of 80 x
60 mm
875 BMT-P.104 Double fixed Louvers Ventilator size of 4’0” x 3’0” (1219.2mm x 914.4mm) 1 sqm 4,177.00
outer frame box section size of 80 x 45mm , Vertical mullion section size of 80
x 60 mm
Wood Grain finish
Providing and fixing of top hung Ventilator with fly mesh made of pre-
painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS
277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65
microns thick and section for outer frame of 100 x 45 mm, centre mullion of
100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-
shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge
fly mesh of 304 grade with 144 holes per sq.inch and mullions to have double
71
SS RATE
Sl.
No
2014-15
rebate for glazed shutter and fly-shutter with a provision for guard bars/grills
and the sections cut to length metre joined with corner bracket, centre
mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window
stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges
of self expanding screws, Including 10 mm Square guard bars with 6”
877 BMT-P.105 Single openable ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 1 sqm 7,551.00
609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh
shutter frame section size of 52 x 25mm thick
878 BMT-P.106 Double openable ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 1 sqm 7,551.00
609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter
frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm
879 BMT-P.107 Double openable fix shutter window size of 4’0” x 3’0” (1219.2mm x 914.4mm) 1 sqm 7,551.00
outer frame section size 100 x 45mm , Glazed and flymesh shutter frame
section size 52 x 25 mm ,Vertical mullion section size of 100 x 60 mm
880 BMT-P.108 Single fixed Louvers Ventilator window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) 1 sqm 5,088.00
outer frame box section size of 100 x 45mm, flymesh shutter frame section
size 52 x 25 mm
881 BMT-P.109 Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 1 sqm 5,088.00
609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame
section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm
882 BMT-P.110 Double fixed Louvers Ventilator window size of 4’0” x 3’0” (1219.2mm x 1 sqm 5,088.00
914.4mm) outer frame box section size 100 x 45mm , flymesh shutter frame
section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm
Wood Grain finish
883 BMT-P.111 Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi 1 sqm 6,005.00
chambered uPVC sections with TPV gaskets having isolated drainage and
reinforced with Galvanized Iron profiles throughout the window. The outer
frame having an overall size of 60 x 55 mm with reinforcement of 1 mm
thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1
mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass,
standard hardware. Wall thickness of frame & Mullion shall be 2.0 mm
884 BMT-P.112 Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan 1 sqm 8,450.00
Provision made out of multi chambered uPVC sections with TPV gaskets having
isolated drainage and reinforced with Galvanized Iron profiles throughout the
window. The outer frame having a overall size of 60 x 55 mm with
reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm with
reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm
with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall
be of size 34 x 20 mm coextruded with gasket. Ventilator shall be provided
with 4.5 mm Pin Head glass, standard hardware, single point locking and
friction stays. Wall thickness of frame, mullion and sash shall be 2.0 mm
Q STRUCTURAL GLAZING
885 BMT-Q.01 Providing and fixing Structural Glazing fabricated from Roll formed sections 1 Sqm 6,748.00
made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’
quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated
thickness of 0.72 mm and the glass holding section made of 304 grade
stainless steel of 0.58 mm thick galvanised steel section as stiffeners inside the
colour coated steel powder coated sections as per the design requirement &
calculations to suit wind pressures as given in IS: 875, the primer coat with
epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-
72
SS RATE
Sl.
No
2014-15
16 microns thick and back coated with Alkyd backer of 5-7 microns or powder
coated with pure polyester powder up to 50-60 microns thick and the vertical
section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame
horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles
sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37
mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass,
brackets made of CRCA powder coated/Electroplated to connect vertical to
horizontal, vertical to slab, to fix verticals at top & bottom as per site
requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V.
resistant silicon sealant including fixing in concrete/masonry wall with self-
expanding cap & screws inclusive of cost and conveyance of all materials to
site, all labour charges, incidental charges, cost of all consumables etc. and
fixing charges complete for finished item of work.
886 BMT-Q.02 Providing and fixing Top Hung shutters in Structural Glazing fabricated from 1 Sqm 5,455.00
Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as
per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm)
with total coated thickness of 0.72 mm and the glass holding section made of
304 grade stainless steel of 0.58 mm thick, duly providing stiffeners inside the
colour coated steel/powder coated sections as per the design requirement,
calculations to suit wind pressures as given in IS 875 and primer coat with
epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-60 microns
thick and the outer frame of 20 mm x 58 mm x 0.58 mm, shutter sections of 57
mm x 33 mm x 0.72 mm, stiffener sections of 55 mm x 31 mm x 1mm, hinges –
2 Nos for each shutter and aluminium Stays – 2 Nos. for each shutter,
aluminium Handle – 1 no. for each shutter including cost and conveyance of all
materials to site, all labour charges, incidental charges, cost of all consumables
etc. and fixing charges etc for finished item of work
887 BMT-Q.03 Supplying and fixing of curtain Glazing made of pre painted steel (base steel as 5,568.00
per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120
GSM) Primer coated with epoxy primer of 5-7 microns thick, finish painted
with a polyester paint of 12- 16 microns thick and back coated with 5-7
microns thick alkyd backer using the section for outer frame of 46 x 52 mm,
section for mullion of 46 x 70 mm and section for beading of 18 x 25 mm and
the glazing with 5 mm thick plain float glass fitted with Ethyl Propylene
diameine Monomer (EPDM) gaskets and the sections cut to length, mitre
joined with corner bracket, centre mullions fixed suing mullion cap inluding
handle made of high grade Aluminium powder coated and nylon receiver,
corner brackets made of CRCA with zinc phosphating, mullion caps made of
Glass filled nylon including fixing the frames in the concrete / masonry wall
with self expanding screws, etc., complete for finished item.- Fixed Glazing 2'-
0" x 2'-0" (609.6x609.6mm) grid outer frames section size of 46 x 52 mm
888 BMT-Q.04 Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm - Fixed 1 Sqm 5,568.00
Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer frame section size of 46 x 52
mm
889 BMT-Q.05 Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed 1 Sqm 4,724.00
mm
890 BMT-Q.06 Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed 1 Sqm 4,724.00
mm
891 BMT-Q.07 deleted
73
SS RATE
Sl.
No
2014-15
897 BMT-Q.13 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Curtain 6,903.00
Walling systems duly manufactured using UPVC reinforced profiles of 60 mm x
56 mm x 2.5 mm for outer frames, 60 mm x 70 mm x 2.5 mm for casement
shutter frames and the mullion sections are of 60 mm x 70 mm x 2.5 mm or 60
mm x 62 mm x 2.5 mm for sliding shutter outer frames and 77 mm x 38 mm x
2.5 mm for sliding shutter frames structurally reinforced with hot dip
galvanized up to 50 microns of minimum thickness of 1 mm the sash shall be
fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM
weathering seal resistant and accessories for casement window - friction stay
hinges of stainless steel grade 304- 2 Nos., per sash, handle with mazak alloy
casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per
sash provided with raiser wedges for smooth operation for sliding window -
clipping locking system 1 No. made of aluminium including cost and
of work
898 BMT-Q.14 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing - 1 Sqm 3,240.00
48 series duly manufactured using UPVC reinforced profiles of 60 mm x 48 mm
x 2.25 mm for outer frames and the mullion sections are of 60 mm x 76 mm x
2.25 mm frames are structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm
thick clear float glass of reputed make duly fixed with EPDM weathering seal
resistant including cost and conveyance of all materials, accessories, labour
charges for transportation, erection at site with templates for casement sizing
complete for finished item of work
899 BMT-Q.15 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing - 1 Sqm 3,872.00
56 series duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm
x 2.25 mm for outer frames and the mullion sections are of 60 mm x 70 mm x
2.25 mm frames are structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm the sash shall be fitted with 5 mm
thick clear float glass of reputed make duly fixed with EPDM weathering seal
resistant including cost and conveyance of all materials, accessories, labour
charges for transportation, erection at site with templates for casement sizing
complete for finished item of work
S A. DISMANTLING clearing away and carefully stacking materials useful for
reuse.
900 BMT-S.01 Stone masonry in cement mortar 1 Cum 336.00
901 BMT-S.02 Terracing work in roofs or floors 10 Sqm 139.00
902 BMT-S.03 Flat stones in roof or floors including lifting 10 Sqm 116.00
903 BMT-S.04 Pan tiled or Mangalore tiled roof without roof timbers. 10 Sqm 105.00
904 BMT-S.05 Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers 10 Sqm 116.00
905 BMT-S.06 Wrought and framed timber in roofs or floors 1 Cum 175.00
906 BMT-S.07 Old lime mortar plaster 10 Sqm 36.00
907 BMT-S.08 Old cement mortar plaster 10 Sqm 41.00
908 BMT-S.09 Dry rough stone revetment for aprons and stacking within 40 M lead 1 Cum 56.00
909 BMT-S.10 Revetment for aprons and stacking grouted within 40 lead 1 Cum 41.00
910 BMT-S.11 Kadapa slabs or Shahabad stone slabs flooring on sand bed 10 Sqm 58.00
911 BMT-S.12 Through scraping of old plastered surface 10 Sqm 36.00
912 BMT-S.13 Washing of plastered surface with soap, soda and water (or with soda lime and 10 Sqm 12.00
water)
74
SS RATE
Sl.
No
2014-15
913 BMT-S.14 clean removal of lime plaster from walls and raking out joints 20mm deep or 10 Sqm 37.00
from terraced roof and raking out joints 100 mm deep
914 BMT-S.15 Clean removal of cement plaster from walls and raking out joint 200 mm deep 10 Sqm 39.00
T READY MIX CONCRETE
916 BMT-T.01 Deleted
U EXPANSION JOINT FILLERS
921 BMT-U.01 Supply of high performance expansion joint filler board conforming to M.O.S.T 1 Sqm 804.00
- 18 mm THICK
922 BMT-U.02 Supply of high performance expansion joint filler board conforming to M.O.S.T 1 Sqm 902.00
- 20 mm THICK
923 BMT-U.03 Supply of high performance expansion joint filler board conforming to M.O.S.T 1 Sqm 1,127.00
- 25 mm THICK
924 BMT-U.04 Supply of expansion joint filler board for buildings, columns, beams and slabs 1 Sqm 322.00
20 mm THICK
25 mm THICK
50 mm THICK
927 BMT-U.07 Supply of back up to cold applied sealant in construction and longitudinal joint 1 RM 13.00
- 10 mm OD
- 12 mm OD
- 15 mm OD
- 20 mm OD
- 25 mm OD
V LABOUR CHARGES
932 BMM-V.01 Bailing out water for earth work excavation /concrete for foundation below 1 cum 205.00
water level. (For building items only) - Other than sandy soil - 0.0 M to 1.0 M
935 BMM-V.04 Bailing out water for earth work excavation / for concrete foundation below 1 cum 325.00
water level. (For building items only) Sandy soil - 0.0 M to 1.0 M
936 BMM-V.05 Bailing out water for earth work excavation /for concrete foundation below 1 cum 504.00
938 BMM-V.07 Labour charges for making, fabricating office furniture, racks, work-station 1 Sqm 512.00
furniture, cup-board shutters with ply-wood/ MDF sheets, decolam/ veneer
laminations including fixing cutting, making, assembling, fixing hinges, fixing
fixtures, fixing locks, pasting sheets/ laminations fixing in position with
necessary screws excluding cost of materials, accessories, fittings
75
SS RATE
Sl.
No
2014-15
939 BMM-V.08 Labour charges for making, fabricating kitchen furniture, cup-boards with 1 Sqm 782.00
shutters, box cup-boards, box racks, with ply-wood/ MDF sheets, decolam/
veneer laminations including fixing cutting, making, assembling, fixing hinges,
fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with
necessary screws excluding cost of materials, accessories, fittings
940 BMM-V.09 Rounding the edges of Kadapa / Shahabad stone slabs of any thickness 1 Rm 88.00
including polishing the same
941 BMM-V.10 Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses 1 Rm 269.00
including polishing the same.
942 BMM-V.11 Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses 1 Rm 348.00
including polishing the same.
943 BMM-V.12 Machine Cutting charges - for Marble/ Granite slabs up to 50 mm thick by 1 RM 14.00
mechanical device.
944 BMM-V.13 Flat nosing to Kadapa/ Shahabad stone slabs of any thick 1 Rm 14.00
945 BMM-V.14 Labour charges for fabricating steel works like Window Grills, Compound Wall 1 Kg 22.00
Grills, Iron Doors, Windows including cost of welding rods, power charges,
excluding cost of fixing in position
946 BMM-V.15 Labour charges for fixing Iron Doors, Iron Windows and Window Grills in 1 Kg 4.00
position
947 BMM-V.16 Labour charges for fabricating all heavy steel works like Trusses, Stanchions, 1 Kg 20.00
Heavy Beams and Girders including cost of welding rods, power charges, etc
excluding cost of fixing in position
948 BMM-V.17 Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams 1 Kg 18.00
and Girders erecting in position and fixing by using chain pulley blocks, Derek
pole arrangements and cranes etc., complete in position
949 BMM-V.18 Labour charges for Fabrication of stainless steel railing works using stainless 1 Kg 111.00
steel welding rods including buffing, polishing, lacquer finishing, to present
seamless finish
950 BMM-V.19 Labour charges for Fabrication of stainless steel sheet cladding works using 1 sqm 1,485.00
stainless steel welding rods including buffing, polishing, lacquer finishing, to
present seamless finish
951 BMM-V.20 Labour charges for Glass designing works on any thickness of Glass including 1 Sqm 808.00
fixing at site - Etching works
952 BMM-V.21 Labour charges for Glass designing works on any thickness of Glass including 1 Sqm 999.00
fixing at site - Reverse Etching work
953 BMM-V.22 Labour charges for Glass designing works on any thickness of Glass including 1 Sqm 1,249.00
fixing at site - Acid wash works
954 BMM-V.23 Labour charges for fixing Flush door shutters of any thickness to the existing 1 Sqm 324.00
door frame including fixing the fixtures to the door shutter excluding cost of
shutter
955 BMM-V.24 Labour charges for fixing glass panes of any thickness to the existing door / 1 Sqm 242.00
window panes including fixing the beading excluding cost of beading
956 BMM-V.25 Labour charges for wrought and put up including fixing in position frames of 1 sqm 1,328.00
any size, shutters for doors, windows, ventilators including fixing all necessary
fixtures etc. for Teak wood Fully panelled doors external or internal including
frame
fixtures etc. for Teak wood Glazed and panelled doors including fixing glass
including frame
76
SS RATE
Sl.
No
2014-15
fixtures etc. for Teak wood Framed and planked doors including frame
959 BMM-V.28 Labour charges for wrought and put up including fixing in position frames of 1 sqm 861.00
fixtures etc. for Teak wood Ledged, braced and planked doors including frame
fixtures etc. for Teak wood Flush type door shutter including frame
fixtures etc. for Teak wood Windows glazed including outer frame and shutter
frame
fixtures etc. for Teak wood Windows panelled including outer frame and
shutter frame
fixtures etc. for Teak wood Windows ledged, braced and planked including
outer frame
fixtures etc. for Teak wood Windows framed and planked including outer
frame and shutter frame
fixtures etc. for Teak wood Ventilators glazed, fixed with double frame with
wire netting including frame
fixtures etc. for Teak wood Swing ventilators glazed including outer frame and
shutter frame
fixtures etc. for Teak wood Weld mesh doors and windows including outer
fixtures etc. for Teak wood G.I or .AC sheet door & windows including outer
fixtures etc. for Other than teakwood Fully panelled doors external or internal
including frame
fixtures etc. for Other than teakwood Glazed and panelled doors including
fixing glass including frame
fixtures etc. for Other than teakwood Framed and planked doors including
frame
77
SS RATE
Sl.
No
2014-15
fixtures etc. for Other than teakwood Ledged, braced and planked doors
including frame
fixtures etc. for Other than teakwood Flush type door shutter including frame
fixtures etc. for Other than teakwood Windows glazed including outer frame
and shutter frame
fixtures etc. for Other than teakwood Windows panelled including outer frame
and shutter frame
fixtures etc. for Other than teakwood Windows ledged, braced and planked
including outer frame
fixtures etc. for Other than teakwood Windows framed and planked including
outer frame and shutter frame
fixtures etc. for Other than teakwood Ventilators glazed, fixed with double
frame with wire netting including frame
fixtures etc. for Other than teakwood Swing ventilators glazed including outer
fixtures etc. for Other than teakwood Weld mesh doors and windows including
outer frame and shutter frame
fixtures etc. for Other than teakwood G.I or .AC sheet door & windows
including outer frame and shutter frame
W MISCELLANEOUS ITEMS
982 BMS-W.01 Supplying Aluminium anodised Sections for Doors, partitions, windows, 1 Kg 321.00
Ventilators (including annodization cost)
983 BMS-W.02 Sun Control film to the glazed windows partition including labour charges. 1 sqm 329.00
984 BMS-W.03 Aluminium Venetian Blinds horizontal 25.4 mm wide with all accessories. 1 sqm 838.00
985 BMS-W.04 Aluminium Venetian Blinds horizontal 20.0 mm wide with all accessories. 1 sqm 798.00
986 BMS-W.05 Venetian blinds Vertical blinds 100 mm wide with all accessories. 1 sqm 1,355.00
987 BMS-W.06 Rubber Beading 1 RM 2.00
988 BMS-W.07 S&F of marblex flooring with 2.0 mm thick in rolls. 1 sqm 421.00
989 BMS-W.08 S&F Vinyl Flooring with 1.5 mm thick in rolls 1 sqm 421.00
990 BMS-W.09 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 1 Litre 228.00
78
SS RATE
Sl.
No
2014-15
991 BMS-W.10 Soft Brush Each 148.00
992 BMS-W.11 Wire Brush Each 33.00
993 BMS-W.12 Supplying and fixing aluminium composite cladding with skin material 0.25 mm 1 Sqm 2,586.00
thick aluminium sheet cover material natural polyethylene aluminium cladding
panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats,
weather sealants, rivets, GI brackets all as approved, using suitable bolts on
structural steel work including necessary accessories complete in all respects
including all scaffolding and labour charges etc., complete for finished item of
work but excluding cost of structural steel fabrication, if any, ACP Cladding - 3
mm thk
mm thk
mm thk
996 BMS-W.15 CEMENT JALI - 25 mm thick 1 sqm 226.00
999 BMS-W.18 Aluminium sheet 24 Gauge 1 Sqm 302.00
1000 BMS-W.19 7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm. 1 Sqm 1,112.00
1001 BMS-W.20 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick 1 Sqm 991.00
1002 BMS-W.21 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick 1 Sqm 568.00
Supply of hot pressed compression moulded sign plates for making road signs
ass per the approved dimensions of National Highway Authority Of India,
complete, for finished item of work.
1003 BMS-W.22 Circular sign plate Dia 400mm. Each. 577.00
1004 BMS-W.23 Circular sign plate Dia 600mm. Each. 1,517.00
1005 BMS-W.24 Circular sing plate Dia 870mm Each. 3,040.00
1006 BMS-W.25 Triangular sign plate 600mm. Each. 779.00
1007 BMS-W.26 Triangular sign plate 900mm. Each. 1,759.00
1008 BMS-W.27 Square sign plate 600mm. Each. 1,410.00
1009 BMS-W.28 Square sign plate 1000mm. Each. 5,236.00
1010 BMS-W.29 Supply of Polyethylene water storage tank double layer conforming to Litre. 8.00
IS:12701-1996 with lid.
Design, fabrication & supply of light weight pre engineered buildings for a
maximum span of 9 metres with 50 x 50 x 2.8 mm M.S hollow square tubes for
columns, trusses & purlins walls with sandwich panels made up of 2 Nos
10mm thick cement bonded particle/ fibre boards with 25mm thick 12 kg/cum
density expanded polystyrene in between encased in 1.25 mm thick 24x7x26
mm ‘W’ tracks in bottom & top and ‘H’ section for sides with doors, windows
& ventilators, roofing with 26 gauge pre painted profiled sheets fixed with self
79
SS RATE
Sl.
No
2014-15
tapping/ drilling screws, painting with enamel paint for steel items, OBD for
interiors and ace for exteriors & providing base plates, templates & anchor
bolts along with civil foundation designs & drawings for the finished item of
work
1011 BMS-W.30 Steel Structure: - Structure is made up of 50x50X 2.8 m/33x66x2.8mm thick 1 RM 395.00
hollow M.S. sections for Trusses, columns, and purloins. - Columns
1012 BMS-W.31 Steel Structure: - Structure is made up of 50x50X 2.8 m/33x66x2.8mm thick 1 RM 1,807.00
hollow M.S. sections for Trusses, columns, and purloins. Trusses
1013 BMS-W.32 10 mm thick 200x200 mm M.s. plates for base plates, 250 mm long 12mm Φ Each 687.00
anchor bolts with plate washer and nuts complete with one coat of Asian or
equivalent red oxide paint.
1014 BMS-W.33 Sandwich panels: Sandwich panels of 50 mm thick with 25 mm thermocol of 1 Sqm 1,430.00
12 kg / cum, fixed in between 2 Nos 10 mm cement bonded wood particle /
fibre boards properly fixed together with 30 mmx30mmx30mm wood pieces
along width & length wherever necessary
1015 BMS-W.34 U' Tracks & 'H' Section:- Bottom & Top 'U' Tracks are made of 1.25 mm thick 1 RM 154.00
120 GSM G.I. Sheet of size 24x51x26 mm size.
1016 BMS-W.35 Fabricated 'H' sections are made up of 2 Nos 1.25 mm thick C.R. Of 40 mm 1 RM 222.00
width for flanges and 1 Nos of 2 mm thick C.R. of 50 mm width plate for web.
will be used
1017 BMS-W.36 Sandwich Panel joinery is made up of couplers or equivalent made from 0.6 1RM 253.00
mm G.I. roll formed section to hold 2 Nos of 10 mm board on both sides with
25 mm thermocol in between.
1018 BMS-W.37 Window:- windows are made up of 51 x51 mm step 'U' section made from 1 Sqm 4,591.00
1.25 thick MS Cold rolled Steel Sheet and Windows Shutters & Grill are made
of 48x25mm mm size pre painted section with 4 mm glass complete with
necessary hardware. Grills are made from 8 mm square rod at 100 mm
spacing.
1019 BMS-W.38 Door Frames :-51 X 51 Stepped ' U' section made from 1.25 mm thick C.R. 1 Sqm 4,394.00
section with a 32 mm rebate for 30 mm flush door and Door Shutters with 30
mm thick block board / flush doors with boiling water proof plywood complete
with necessary Hard ware.
1020 BMS-W.39 Ventilators:- Ventilators are made of 51x51 mm step 'U' section made From 1 Sqm 4,917.00
1.25 mm thick C.R. sheet with fixed louvers and glass.
1021 BMS-W.40 Painting:-1) Steel structure is to be painted with 2 coats of Grade I enamel 1 Sqm 124.00
paint.
1022 BMS-W.41 2) Exterior walls are painted with one coast of primer and 2 coats of exterior 1 Sqm 111.00
emulsion paint .
1023 BMS-W.42 3) Interiors are painted with 1+2 coat of O.B.D. 1 Sqm 97.00
1024 BMS-W.43 Toilets: - Toilets are provided as per plan with a provision for fixing the wash Each 1,050.00
basin, W.C. etc only is made with M.S. steel section secured to the walls with
toilet bracket provision excluding cost of WC/ Wash basin etc
1025 BMS-W.44 Sun shades: - Sun shades will be provided wherever necessary with 300 mm Each 3,541.00
more than the width of window. 25x25 mm angle frame to cover 450 mm in
the front and the sides. 10mm cement bonded particle board will be fixed on
the frame work and sealed with green paste or equivalent.
1026 BMS-W.45 Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted 1 Sqm 799.00
G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with
neoprene washer. Side laps are stitched with self tapping / drilling screws. End
laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with
anti capillary grove.
80
SS RATE
Sl.
No
2014-15
Supply and fixing of factory made Bathroom door frames without threshold,
fabricated from pre-painted cold roll formed section 50mm x 50 mm made of
galvanized (base steel as per IS – 513 ‘D’ quality, galvanized as per IS-277 with
Zinc of 120 Gms/sqm) steel colour coated sections with total coated thickness
of 1 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted
with polyester paint of 12-16 microns and back coated with alkyd backer of 5-7
microns and the frame section filled with polyurethane (P.U. Foam) of 40
Kg/Cum; and the sections cut to length and mitre joined by means of 1.25mm
thick CRCA electroplated corner brackets of size 75 x 75 mm and 1.25mm thick
electroplated stiffeners of size 150mm for fixing hold fasts and hinges together
with the following MS Power coated fitting (Supply and fixing) of approved
make.
a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of 230mm long,
3 Nos each side expandable PVC covered screw type fasteners
b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but
hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf )
1027 BMS-W.46 c) 12 mm Dia MS tie rod at bottom with necessary size of nuts on either side. 1 RM 428.00
1028 BMS-W.47 Preparing gabions with jungle wood Each 3.00
1029 BMS-W.48 Planting plants Each 2.00
1030 BMS-W.49 Pruning plants Each 2.00
1031 BMS-W.50 Maintaining avenues including fencing, weeding, mulching, watering etc per Each 6.00
plant.
1032 BMS-W.51 - do - When scattered in hot weather with extra conveyance from March to Each 7.00
June
1033 BMS-W.52 Hoisting or lowering of slab 1 cum 105.00
1034 BMS-W.53 Dressing faces of granite stone (double line dressing) 1 Sqm 174.00
1035 BMS-W.54 Dressing faces of other than granite stone(double line dressing) 1 Sqm 108.00
1036 BMS-W.55 Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 1 Sqm 456.00
0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550
MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness
(Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length:
Maximum 12 Meters with Regular Range Colours
1037 BMS-W.56 Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 1 Sqm 445.00
0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550
1038 BMS-W.57 Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 1 Sqm 400.00
0.50mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300
1039 BMS-W.58 Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 1 Sqm 376.00
0.47mm thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300
1040 BMS-W.59 Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- 1 RM 307.00
Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length:
Maximum 2½ Meters
1041 BMS-W.60 Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- 1 RM 274.00
Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length:
Maximum 2½ Meters
81
SS RATE
Sl.
No
2014-15
1042 BMS-W.61 75 mm long screws - 1 Each 4.00
1043 BMS-W.62 G.I scam bolts & nuts 1 Each 5.00
1044 BMS-W.63 G.I bolts & nuts 1 Each 5.00
1045 BMS-W.64 G.I ‘J’ bolts 8 mm dia 1 Each 10.00
1046 BMS-W.65 G.I Washers 1 Each 1.00
1047 BMS-W.66 Limpet washers (for scam & ‘J’ bolts) 1 Each 0.50
1048 BMS-W.67 Bitumen washers 1 Each 0.30
1049 BMS-W.68 White Cement 1 Kg 29.00
1050 BMS-W.69 MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA 1 Each 35.00
1051 BMS-W.70 Rubber/ Nylon door stop bushes 1 Each 10.00
1052 BMS-W.71 Nylon rollers for sliding glasses/ alluminium windows 1 Each 15.00
1053 BMS-W.72 Powder coating or colour annodization- any section 1 RM 50.00
1054 BMS-W.73 Continuous Piano Hinges Powder coated Mild steel as per IS-3818 : 1992 of 1 RM 35.00
nominal size 25 mm (B) of thickness 0.8 to 1.0 mm
1055 BMS-W.74 Box hinges for cup boards 1 Each 45.00
1056 BMS-W.75 Magnetic Catchers 1 Each 15.00
1057 BMS-W.76 Drilling holes in hard rock surfaces up to 18mm dia 1 RM 210.00
1058 BMS-W.77 Drilling holes in hard rock above 18mm dia 1 RM 293.00
1059 BMS-W.78 Making holes up to 18mm dia in RCC/ any stones up to 50 mm thick 1 Each 35.00
1060 BMS-W.79 Making holes above 18mm dia in RCC/ any stones above 50 mm thick 1 Each 49.00
1061 BMS-W.80 Pressure grouting the drilled holes with neat cement slurry or with approved 1 Each 50.00
epoxy bonding agent using pump
MACHINERY CHARGES, HIRE CHARGES FOR CENTRING
1062 BMC-X.01 Machine charges of rubbing/ polishing floor 1 day 2,145.00
1063 BMC-X.02 Power Saw Cutter - Hand Operated - Hire charges 1 Hr 125.00
1064 BMC-X.03 Power Drill - Hand Operated - Hire Charges 1 Hr 116.00
1065 BMC-X.04 Grinding Mortar (Spl Grinding) 1 day 1,072.00
1066 BMC-X.05 Casuarina Balli Props - 3" to 4" dia - 12'-0" Height Each 73.00
1067 BMC-X.06 Casuarina Balli Props - 4" to 8" dia - 20'-0" Height Each 121.00
1068 BMC-X.07 Wall Plate Brackets / beam bottom supports Each 212.00
1069 BMC-X.08 Wedge Plate fixture Each 10.00
1070 BMC-X.09 Runner beams of approximately 4" x 4" size RM 425.00
1071 BMC-X.10 Steel Plates for form works 1 sqm 1,609.00
1072 BMC-X.11 Scaffolding Pipes & Centering accessories 1 Kg 121.00
1073 BMC-X.12 Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" long Each 130.00
1 All the items to be used on work are of first quality & ISI and as approved by the Engineer In charge of the work.
2 Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
3 Works Contract VAT for General/ Composition Scheme on finished items may be allowed as applicable.
4 SSR Rates for Building items are purely for guidance for the officers for preparation of estimates vide para.113 of APPWD
code. Authority who prepares the estimate is however responsible for proper rates as envisaged in para.45 of APPWD
code.
LEGEND "BMT" -X.XX

"BMM"-X.XX
"BMS"-X.XX
"BMC"-X.XX
XXX-"A".XX
XXX-X."01"
82
List of Approved brands - Buildings SoR: 2014-15
Sl.
SECTION NAMES OF THE ITEMS NAMES OF THE APPROVED BRAND/ MANUFACTURER/ SUPPLIER
No
1 SECTION – C WALL & FLOOR TILES Somany, HR Jhonson, Naveen Ceramics, Kajaria, Nitco, Sphinx
TILE ADHESIVES Laticrete
2 SECTION – D PAVING & INTERLOCKING TILES Super Decorative, Aditya Designer, Maha Bhima, Tricon, Pheonix,
Eurocon, Ultra, Sphinx
3 SECTION – G FIXTURES FOR DOOR & WINDOWS Jyoti, Classic, Hardwyn
4 SECTION – I GLASS Modi, Saingobain, Asahi, Binani, HNG
5 SECTION – J PAINTS & POLISHES Asian, Berger, Nerolac, Saicoat, Indocem, PMCC, ESSAR, Sheenlac,
Altek, Suryacem, Neon,
6 SECTION – K PARTICLE BOARDS NCL Bison, Ramco-Hilux, Everest-board, Visakha-board, Rajshri,
Innsula, Aerocon, Aerolite
7 SECTION – M CEILINGS, WALL PARTITIONS & NCL-Seccolor, NCL Bison, Ramco-Hilux, Everest-board, Visakha-board,
WALL LININGS Rajshri, Innsula, Gypsum India, Armstrong
8 SECTION – N DOORS NCL-Seccolor, Anand, Raavila, Kutty, Standard, Shubhdwar, ITP,
Rajshri, NCL-Bison, Elixir, Sintex, Elgi, Polywood, Sintex, NCL-Wintech,
Fenesta, LG, Masonite
9 SECTION – P WINDOWS NCL-Seccolor, NCL-Bison, Elixir, Sintex, Elgi, Polywood, NCL-Wintech,
Fenesta, LG,
10 SECTION – Q STRUCTURAL GLAZING NCL-Seccolor, NCL-Bison, Elixir, Sintex, Elgi, Polywood, Sintex, NCL-
Wintech, Fenesta, LG
11 SECTION – U EXPANSION JOINT FILLERS Silseal, Silflex, Armour, Shalitex
12 SECTION – W MISCELLANEOUS ITEMS Sintex for PVC tanks, Centurywells for Galvalume sheets, Elixir for
PEB structures, Alluminium Sections - Hindalco, Nalco, Jindal,
Plywood - Kitply, Century Ply, National Ply, Bhutan Ply
83
Scaffolding Charges - Buildings SoR: 2014-15
Material Hire Centring Charges Unit of

Sl NAME OF THE STRUCTURAL MEMBER Labour charges
charges for 2014-15 Measurement
1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING
A FOOTINGS Rs. 277.00 Rs. 446.00 Rs. 723.00 per 1 cum

B BED BLOCKS, BANDS Rs. 61.00 Rs. 230.00 Rs. 291.00 per 1 cum
C PEDESTALS Rs. 315.00 Rs. 710.00 Rs. 1025.00 per 1 cum
D PLINTH BEAMS Rs. 1335.00 Rs. 1075.00 Rs. 2410.00 per 1 cum
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc.,
E LINTELS Rs. 1133.00 Rs. 1141.00 Rs. 2274.00 per 1 cum

F CHAJJAS - SUNSHADES Rs. 224.00 Rs. 175.00 Rs. 399.00 per 1 sqm
G COLUMNS Rs. 341.00 Rs. 1603.00 Rs. 1944.00 per 1 cum
H BEAMS Rs. 2002.00 Rs. 1344.00 Rs. 3346.00 per 1 cum
I SLABS - Up to 150 mm thick Rs. 227.00 Rs. 152.00 Rs. 379.00 per 1 sqm
J SLABS - above 150 mm - Up to 300 mm thick Rs. 233.00 Rs. 157.00 Rs. 390.00 per 1 sqm
K SLABS - above 300 mm thick Rs. 244.00 Rs. 164.00 Rs. 408.00 per 1 sqm
L WAFFLE - (GRID) SLABS (Rib Beams with Slabs) Rs. 824.00 Rs. 553.00 Rs. 1377.00 per 1 sqm
M PERGOLA SLABS (Only Rib Beams) Rs. 578.00 Rs. 388.00 Rs. 966.00 per 1 sqm
N ARCH BEAMS - up to 1.5 M Span Rs. 2276.00 Rs. 1528.00 Rs. 3804.00 per 1 cum
O ARCH BEAMS - above 1.5 M Span Rs. 2308.00 Rs. 1550.00 Rs. 3858.00 per 1 cum
P DOME SLABS Rs. 3681.00 Rs. 2471.00 Rs. 6152.00 per 1 cum
Q HELICAL STAIRCASES Rs. 280.00 Rs. 188.00 Rs. 468.00 per 1 sqm
R SHEAR WALLS, RCC WALLS, WATER TANK WALLS DELETED
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc.,

84

1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING
A FOOTINGS Rs. 277.00 Rs. 446.00 Rs. 723.00 per 1 cum

B BED BLOCKS, BANDS Rs. 61.00 Rs. 230.00 Rs. 291.00 per 1 cum
C PEDESTALS Rs. 315.00 Rs. 710.00 Rs. 1025.00 per 1 cum
D PLINTH BEAMS Rs. 1335.00 Rs. 1075.00 Rs. 2410.00 per 1 cum
Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,


1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall
Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm (Wall Area)
A 1st - Floor Rs. 9.93 Rs. 58.66 Rs. 68.59 per 1 sqm
B 2nd - Floor Rs. 9.93 Rs. 83.03 Rs. 92.95 per 1 sqm
C 3rd - Floor Rs. 9.93 Rs. 107.39 Rs. 117.32 per 1 sqm
D 4th - Floor Rs. 9.93 Rs. 131.76 Rs. 141.68 per 1 sqm
E 5th - Floor Rs. 9.93 Rs. 156.12 Rs. 166.05 per 1 sqm
F 6th - Floor Rs. 9.93 Rs. 180.49 Rs. 190.42 per 1 sqm
G 7th - Floor Rs. 9.93 Rs. 204.85 Rs. 214.78 per 1 sqm
H 8th - Floor Rs. 9.93 Rs. 229.22 Rs. 239.15 per 1 sqm
I 9th - Floor Rs. 9.93 Rs. 253.59 Rs. 263.51 per 1 sqm
J 10th - Floor Rs. 9.93 Rs. 277.95 Rs. 287.88 per 1 sqm
K 11th - Floor Rs. 9.93 Rs. 302.32 Rs. 312.24 per 1 sqm
L 12th - Floor Rs. 9.93 Rs. 326.68 Rs. 336.61 per 1 sqm
M 13th - Floor Rs. 9.93 Rs. 351.05 Rs. 360.98 per 1 sqm
N 14th - Floor Rs. 9.93 Rs. 375.41 Rs. 385.34 per 1 sqm
O 15th - Floor Rs. 9.93 Rs. 399.78 Rs. 409.71 per 1 sqm
85

1 2 3 4 5 6
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall
Plates etc., for PLASTERING to WALLS - 1 sqm
HIRE CHARGES FOR STAGE SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall
Plates etc., for CEILING PLASTERING - 1 sqm
86
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for unsupported height 3.66 M
SLABS -
WAFFLE
above
SLABS - SLABS - - (GRID) ARCH ARCH
150 PERGOL
CHAJJAS - Up to above SLABS BEAMS - BEAMS - HELICAL
COLUMN mm - A SLABS DOME
FLOOR LINTELS SUNSHADE BEAMS 150 300 (Rib up to above STAIRCASE
S Up to (Only Rib SLABS
S mm mm Beams 1.5 M 1.5 M S
300 Beams)
thick thick with Span Span
mm
Slabs)
thick
Material Hire for any
Floor H 1133.00 224.00 341.00 2002.00 227.00 233.00 244.00 824.00 578.00 2276.00 2308.00 3681.00 280.00
Labour Charges for 1st
Floor L 1141.00 175.00 1603.00 1344.00 152.00 157.00 164.00 553.00 388.00 1528.00 1550.00 2471.00 188.00
Total Hire Charges (H+L) T 2274.00 399.00 1944.00 3346.00 379.00 390.00 408.00 1377.00 966.00 3804.00 3858.00 6152.00 468.00
1st - Floor L 1141.00 175.00 1603.00 1344.00 152.00 157.00 164.00 553.00 388.00 1528.00 1550.00 2471.00 188.00
2nd - Floor L 1255.00 193.00 1763.00 1478.00 167.00 173.00 180.00 608.00 427.00 1681.00 1705.00 2718.00 207.00
3rd - Floor L 1369.00 210.00 1924.00 1613.00 182.00 188.00 197.00 664.00 466.00 1834.00 1860.00 2965.00 226.00
4th - Floor L 1483.00 228.00 2084.00 1747.00 198.00 204.00 213.00 719.00 504.00 1986.00 2015.00 3212.00 244.00
5th - Floor L 1597.00 245.00 2244.00 1882.00 213.00 220.00 230.00 774.00 543.00 2139.00 2170.00 3459.00 263.00
6th - Floor L 1712.00 263.00 2405.00 2016.00 228.00 236.00 246.00 830.00 582.00 2292.00 2325.00 3707.00 282.00
7th - Floor L 1826.00 280.00 2565.00 2150.00 243.00 251.00 262.00 885.00 621.00 2445.00 2480.00 3954.00 301.00
8th - Floor L 1940.00 298.00 2725.00 2285.00 258.00 267.00 279.00 940.00 660.00 2598.00 2635.00 4201.00 320.00
9th - Floor L 2054.00 315.00 2885.00 2419.00 274.00 283.00 295.00 995.00 698.00 2750.00 2790.00 4448.00 338.00
10th - Floor L 2168.00 333.00 3046.00 2554.00 289.00 298.00 312.00 1051.00 737.00 2903.00 2945.00 4695.00 357.00
11th - Floor L 2282.00 350.00 3206.00 2688.00 304.00 314.00 328.00 1106.00 776.00 3056.00 3100.00 4942.00 376.00
12th - Floor L 2396.00 368.00 3366.00 2822.00 319.00 330.00 344.00 1161.00 815.00 3209.00 3255.00 5189.00 395.00
13th - Floor L 2510.00 385.00 3527.00 2957.00 334.00 345.00 361.00 1217.00 854.00 3362.00 3410.00 5436.00 414.00
14th - Floor L 2624.00 403.00 3687.00 3091.00 350.00 361.00 377.00 1272.00 892.00 3514.00 3565.00 5683.00 432.00
15th - Floor L 2738.00 420.00 3847.00 3226.00 365.00 377.00 394.00 1327.00 931.00 3667.00 3720.00 5930.00 451.00
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height above 3.66 M may be allowed at 16.666%
more than the basic material hire charges and relevant labour charges of the applicable floor and item
87
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for unsupported height 7.32 M
SLABS -
WAFFLE
above
150 PERGOLA
Up to above SLABS BEAMS BEAMS
CHAJJAS - mm - SLABS DOME HELICAL
FLOOR LINTELS COLUMNS BEAMS 150 300 (Rib - up to - above
SUNSHADES Up to (Only Rib SLABS STAIRCASES
mm mm Beams 1.5 M 1.5 M
300 Beams)
mm
Slabs)
thick
Material Hire for any Floor H 2042.00 403.00 615.00 3607.00 409.00 421.00 440.00 1485.00 1042.00 4101.00 4159.00 6632.00 505.00
Labour Charges for 1st Floor L 1806.00 278.00 2537.00 2127.00 241.00 248.00 259.00 876.00 614.00 2418.00 2452.00 3911.00 298.00
1st - Floor L 1806.00 278.00 2537.00 2127.00 241.00 248.00 259.00 876.00 614.00 2418.00 2452.00 3911.00 298.00
2nd - Floor L 1987.00 306.00 2791.00 2340.00 265.00 273.00 285.00 964.00 675.00 2660.00 2697.00 4302.00 328.00
3rd - Floor L 2167.00 334.00 3044.00 2552.00 289.00 298.00 311.00 1051.00 737.00 2902.00 2942.00 4693.00 358.00
4th - Floor L 2348.00 361.00 3298.00 2765.00 313.00 322.00 337.00 1139.00 798.00 3143.00 3188.00 5084.00 387.00
5th - Floor L 2528.00 389.00 3552.00 2978.00 337.00 347.00 363.00 1226.00 860.00 3385.00 3433.00 5475.00 417.00
6th - Floor L 2709.00 417.00 3806.00 3191.00 362.00 372.00 389.00 1314.00 921.00 3627.00 3678.00 5867.00 447.00
7th - Floor L 2890.00 445.00 4059.00 3403.00 386.00 397.00 414.00 1402.00 982.00 3869.00 3923.00 6258.00 477.00
8th - Floor L 3070.00 473.00 4313.00 3616.00 410.00 422.00 440.00 1489.00 1044.00 4111.00 4168.00 6649.00 507.00
9th - Floor L 3251.00 500.00 4567.00 3829.00 434.00 446.00 466.00 1577.00 1105.00 4352.00 4414.00 7040.00 536.00
10th - Floor L 3431.00 528.00 4820.00 4041.00 458.00 471.00 492.00 1664.00 1167.00 4594.00 4659.00 7431.00 566.00
11th - Floor L 3612.00 556.00 5074.00 4254.00 482.00 496.00 518.00 1752.00 1228.00 4836.00 4904.00 7822.00 596.00
12th - Floor L 3793.00 584.00 5328.00 4467.00 506.00 521.00 544.00 1840.00 1289.00 5078.00 5149.00 8213.00 626.00
13th - Floor L 3973.00 612.00 5581.00 4679.00 530.00 546.00 570.00 1927.00 1351.00 5320.00 5394.00 8604.00 656.00
14th - Floor L 4154.00 639.00 5835.00 4892.00 554.00 570.00 596.00 2015.00 1412.00 5561.00 5640.00 8995.00 685.00
15th - Floor L 4334.00 667.00 6089.00 5105.00 578.00 595.00 622.00 2102.00 1474.00 5803.00 5885.00 9386.00 715.00
88
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, Steel Centring Plates etc., for unsupported height
3.66 M
SLABS -
WAFFLE
above
150 PERGOLA
Up to above SLABS BEAMS BEAMS
CHAJJAS - mm - SLABS DOME HELICAL
FLOOR LINTELS COLUMNS BEAMS 150 300 (Rib - up to - above
SUNSHADES Up to (Only Rib SLABS STAIRCASES
mm mm Beams 1.5 M 1.5 M
300 Beams)
mm
Slabs)
thick
Material Hire for any Floor H 760.00 150.00 229.00 1342.00 152.00 156.00 164.00 553.00 387.00 1526.00 1547.00 2467.00 188.00
Labour Charges for 1st Floor L 903.00 139.00 1268.00 1064.00 121.00 124.00 130.00 438.00 307.00 1209.00 1226.00 1955.00 149.00
1st - Floor L 903.00 139.00 1268.00 1064.00 121.00 124.00 130.00 438.00 307.00 1209.00 1226.00 1955.00 149.00
2nd - Floor L 993.00 153.00 1395.00 1170.00 133.00 136.00 143.00 482.00 338.00 1330.00 1349.00 2151.00 164.00
3rd - Floor L 1084.00 167.00 1522.00 1277.00 145.00 149.00 156.00 526.00 368.00 1451.00 1471.00 2346.00 179.00
4th - Floor L 1174.00 181.00 1648.00 1383.00 157.00 161.00 169.00 569.00 399.00 1572.00 1594.00 2542.00 194.00
5th - Floor L 1264.00 195.00 1775.00 1490.00 169.00 174.00 182.00 613.00 430.00 1693.00 1716.00 2737.00 209.00
6th - Floor L 1355.00 209.00 1902.00 1596.00 182.00 186.00 195.00 657.00 461.00 1814.00 1839.00 2933.00 224.00
7th - Floor L 1445.00 222.00 2029.00 1702.00 194.00 198.00 208.00 701.00 491.00 1934.00 1962.00 3128.00 238.00
8th - Floor L 1535.00 236.00 2156.00 1809.00 206.00 211.00 221.00 745.00 522.00 2055.00 2084.00 3324.00 253.00
9th - Floor L 1625.00 250.00 2282.00 1915.00 218.00 223.00 234.00 788.00 553.00 2176.00 2207.00 3519.00 268.00
10th - Floor L 1716.00 264.00 2409.00 2022.00 230.00 236.00 247.00 832.00 583.00 2297.00 2329.00 3715.00 283.00
11th - Floor L 1806.00 278.00 2536.00 2128.00 242.00 248.00 260.00 876.00 614.00 2418.00 2452.00 3910.00 298.00
12th - Floor L 1896.00 292.00 2663.00 2234.00 254.00 260.00 273.00 920.00 645.00 2539.00 2575.00 4106.00 313.00
13th - Floor L 1987.00 306.00 2790.00 2341.00 266.00 273.00 286.00 964.00 675.00 2660.00 2697.00 4301.00 328.00
14th - Floor L 2077.00 320.00 2916.00 2447.00 278.00 285.00 299.00 1007.00 706.00 2781.00 2820.00 4497.00 343.00
15th - Floor L 2167.00 334.00 3043.00 2554.00 290.00 298.00 312.00 1051.00 737.00 2902.00 2942.00 4692.00 358.00
89
Water supply & Sanitary Items – Buildings SoR: 2014-15
WATER SUPPLY
&
SANITARY ITEMS
90
SS RATE
Sl. No Item Code Description of item Unit FOR
2014-15
1 2 3 4 5
A S.W.G. PIPES & FITTINGS
1 BMW-A.01 Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes of ISI 1 RM 466.00
make conforming to ISI 651 & 4127 with airtight cement joints in CM
1.5:1 prop. Including excavation of trenches and socket pits in any soil
(except rock requiring blasting) up to 1524 mm(5'0") depth and refilling
with watering and tamping.
1:5:1 prop. including excavation of trenches and socket pits in any soil
(except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling
1.5:1 prop. including excavation of trenches and socket pits in any soil
(except rock requiring blasting) up to 1524 mm(5'0") depth and refilling
1.5:1 prop. including excavation of trenches and socket pits in any soil
(except rock requiring blasting) up to 914.4 mm (3'0")) depth and refilling
5 BMW-A.05 labour charges only for laying, jointing and testing SWG pipes of any dia 1 RM 216.00
with airtight cement joints including excavation of trenches and socket
pits in any soil up to 914.4 mm (3'0") depth (except rock requiring
blasting) and refilling with watering and tamping.
6 BMW-A.06 labour charges only for laying, jointing and testing SWG pipes of any dia 1 RM 268.00
with airtight cement joints including excavation of trenches and socket
pits in any soil up to 1524 mm (5'-0") depth (except rock requiring
blasting) and refilling with watering and tamping.
7 BMW-A.07 a)Supplying , laying, jointing and testing 152.4 mm CC bed 1:2:4 Prop: 1 RM 126.00
using 19.05 mm gauge graded granite metal chips and cradling 101.6
mm SWG pipe line all round to have 76.2 mm thick cover over the
sockets.
8 BMW-A.08 b) - do - labour charges only 1 RM 10.00
9 BMW-A.09 a)Supplying , laying, jointing and testing 152.4 mm CC bed 1:2:4 Prop: 1 RM 217.00
using 19.05 mm gauge graded granite metal chips and cradling 152.4
mm SWG pipe line all round to have 76.2 mm thick cover over the
sockets.
11 BMW-A.11 a) Supplying & Laying 101.6 mm SWG channels with cement mortar 1 RM 87.00
joints with suitable brick masonry for fixing the channels in position
13 BMW-A.13 a) Supplying & Laying 152.4 mm SWG channels with cement mortar 1 RM 163.00
joints with suitable brick masonry for fixing the channels in position
15 BMW-A.15 Supply of SWG SP-1 pipe conforming to ISI 651 - 4" dia (101.6mm) 1 RM 181.00
18 BMW-A.18 Supply of SWG SP-1 pipe conforming to ISI 651 - 10" dia (254 mm) 1 RM 888.00
19 BMW-A.19 Supply of SWG SP-1 pipe conforming to ISI 651 - 12" dia (300 mm) 1 RM 1,280.00
26 BMW-A.26 Supply of SWG SP-2 pipe conforming to ISI 651 - 10" dia (254 mm) 1 RM 941.00
91
SS RATE
2014-15
39 BMW-A.39 Supply of SWG Bends conforming to IS standards -100 mm dia Each 91.00
44 BMW-A.44 Supply of SWG Bends conforming to IS standards -350 mm dia Each 1,020.00
45 BMW-A.45 Supply of SWG Junctions (T's & Y's) conforming to IS standards with Each 175.00
length of barrel 60 cm for - 100 x 100
53 BMW-A.53 Supply of SWG Junctions (T's & Y's) conforming to IS standards with Each 1,031.00
92
SS RATE
2014-15
66 BMW-A.66 Supply of SWG Plugs conforming to IS standards for 100 mm dia Each 33.00
72 BMW-A.72 Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI Each 568.00
651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop.
Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I
Frame and hinged cover
73 BMW-A.73 Supply of SWG Gully Traps (Round & Square) conforming to IS standards Each 254.00
150 x 100 mm
74 BMW-A.74 Labour charges for fixing and laying the SWG Junctions/ Plugs/ Bends of Each 28.00
any dia with airtight cement joints as per standard practice
75 BMW-A.75 Supply of SWG Saddles conforming to IS standards 150 x 100 mm 184.00
B MAN HOLES & INSPECTION CHAMBERS - AS PER - IS 4111 : Part 1 : 1986
78 BMW-B.01 Constructing 904.0 mm (3’0”) dia solid block masonry inspection Each 6,530.00
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop
using fly-ash blocks of 225 mm thick from approved source having a
minimum crushing strength of 10 N/sq.mm including plastering with
cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20”
dia RCC manhole covers and frames including excavating pits up to a
depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying
cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and
P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all materials like
cement, sand, bricks, water etc., to site, cost of seigniorage charges on
all materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing etc.,
complete for finished item of work as per Standard specification.
79 BMW-B.02 Constructing 904.0 mm (3’0”) dia solid block masonry inspection Each 10,218.00
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop
using fly-ash blocks of 225 mm thick from approved source having a
minimum crushing strength of 10 N/sq.mm including plastering with
cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20”
dia RCC manhole covers and frames including excavating pits up to a
depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying
cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and
P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all materials like
cement, sand, bricks, water etc., to site, cost of seigniorage charges on
all materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing etc.,
complete for finished item of work as per Standard specification.
80 BMW-B.03 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as Each 6,237.00
per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class
Clay Bricks of 225 mm thick from approved source having a minimum
crushing strength of 5 N/sq.mm including plastering with cement mortar
1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC
manhole covers and frames including excavating pits up to a depth of
904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement
concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand, bricks,
93
SS RATE
2014-15
water etc., to site, cost of seigniorage charges on all materials and all
incidental and operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing etc., complete for finished item
of work as per Standard specification.
81 BMW-B.04 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as Each 9,651.00
per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class
Clay Bricks of 225 mm thick from approved source having a minimum
crushing strength of 5 N/sq.mm including plastering with cement mortar
1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC
manhole covers and frames including excavating pits up to a depth of
1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement
concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand, bricks,
water etc., to site, cost of seigniorage charges on all materials and all
incidental and operational, labour charges like mixing cement mortar,
constructing masonry, lift charges, curing etc., complete for finished item
of work as per Standard specification.
82 BMW-B.05 Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Each 6,091.00
Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light
weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg.
83 BMW-B.06 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Each 3,672.00
Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light
weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.
84 BMW-B.07 a)Making drainage connection in the existing inspection including all Each 117.00
repairs
85 BMW-B.08 b) - do - labour charges only Each 71.00
C C.I. PIPES & FITTINGS - AS PER - IS 1729:1979 (Materials shall be
procured from the list of approved Brands/ Manufacturers/ Suppliers)
Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked
conforming to IS:1729-1979 of reputed make with cement caulked joints
and fixing as per site requirements including painting black with Japan
paint and fixing with necessary wooden blocks fixed in the masonry walls
in cement mortar (1½:1) and including fixing of M.S. clamps if necessary
with required no. of Bombay nails etc., complete
86 BMW-C.01 3" dia (76.2 mm) Single Socket 1 RM 760.00
87 BMW-C.02 4" dia (101.6mm) Single Socket 1 RM 998.00
88 BMW-C.03 6" dia (152.4mm) Single Socket 1 RM 1,598.00
89 BMW-C.04 3" dia (76.2 mm) Double Socket 1 RM 831.00
90 BMW-C.05 4" dia (101.6mm) Double Socket 1 RM 1,109.00
91 BMW-C.06 6" dia (152.4mm) Double Socket 1 RM 1,841.00
92 BMW-C.07 Labour charges only for fixing of C.I. Single/ Double Socket soil pipes of 1 RM 211.00
any dia with cement caulked joints and fixing as per site requirements
including painting black with Japan paint and fixing with necessary
wooden blocks fixed in the masonry walls in cement mortar and
including fixing of M.S. clamps if necessary with required nails
93 BMW-C.08 Supplying & fixing CI Plain bends Ist quality ISI marked conforming to Each 296.00
IS:1729-1979 with cement caulked joints and fixing as per site
requirements with standard practice for 3" dia (76.2 mm)
96 BMW-C.11 Supplying & fixing CI Plug (Door) bends Ist quality ISI marked conforming Each 367.00
to IS:1729-1979 with cement caulked joints and fixing as per site
94
SS RATE
2014-15
99 BMW-C.14 Labour charges only for fixing CI Plain/ Plug (Door) bends with cement Each 67.00
caulked joints and fixing as per site requirements with standard practice
100 BMW-C.15 Supplying and fixing of 76.2 mm (3") CI soil single junction with plug : Each 462.00
conforming to IS:1729-1979 with cement caulked joints and fixing
101 BMW-C.16 Supplying and fixing of 101.6 mm (4") CI soil single junction with plug : Each 723.00
102 BMW-C.17 Supplying and fixing of 152.4 mm (6") CI soil single junction with plug : Each 1,714.00
103 BMW-C.18 Supplying and fixing of 76.2 mm (3") CI soil plain single junction : Each 388.00
104 BMW-C.19 Supplying and fixing of 101.6 mm (4") CI soil plain single junction : Each 531.00
105 BMW-C.20 Supplying and fixing of 152.4 mm (6") CI soil plain single junction : Each 1,276.00
106 BMW-C.21 Labour charges only fixing CI soil single junctions with cement caulked Each 91.00
joints and fixing as per site requirements with standard practice
107 BMW-C.22 Supplying and Fixing of 76.2 mm (3") CI soil Double junction with plug : Each 704.00
108 BMW-C.23 Supplying and Fixing of 101.6 mm (4") CI soil Double junction with plug : Each 855.00
109 BMW-C.24 Supplying and Fixing of 152.4 mm (6") CI soil Double junction with plug : Each 1,999.00
110 BMW-C.25 Supplying and Fixing of 76.2 mm (3") CI soil plain Double junction : Each 608.00
111 BMW-C.26 Supplying and Fixing of 101.6 mm (4") CI soil plain Double junction : Each 799.00
112 BMW-C.27 Supplying and Fixing of 152.4 mm (6") CI soil plain Double junction : Each 1,872.00
113 BMW-C.28 Labour charges only fixing CI soil Double junctions with cement caulked Each 84.00
joints and fixing as per site requirements with standard practice
114 BMW-C.29 Supplying and Fixing of 75mm C.I. Offsets Ist quality conforming to Each 298.00
IS:1729-1979 with cement caulked joints and fixing -for 76.20 mm (3")
C.I. Pipe
C.I. Pipe
C.I. Pipe
117 BMW-C.32 Supplying and Fixing of 115 mm C.I. Offsets Ist quality conforming to Each 355.00
IS:1729-1979 with cement caulked joints and fixing - for 76.20 mm (3")
C.I. Pipe
C.I. Pipe
C.I. Pipe
IS:1729-1979 with cement caulked joints and fixing for 76.20 mm (3")
C.I. Pipe
95
SS RATE
2014-15
C.I. Pipe
122 BMW-C.37 Supplying and Fixing of 150 mm C.I. Offsets Ist quality conforming to Each 1,082.00
C.I. Pipe
123 BMW-C.38 Labour charges only fixing CI soil Offsets with cement caulked joints and Each 42.00
fixing as per site requirements with standard practice
124 BMW-C.39 Supplying & fixing CI floor traps 1st quality ISI marked conforming to Each 539.00
IS:1729-1979 with C.P. Grating fixing with white cement as per site
requirements with standard practice for nominal dia 75 mm (3") and
grating size 165 mm dia of weight not less than 5.5 Kgs
125 BMW-C.40 Supplying & fixing CI floor traps 1st quality ISI marked with C.P. Grating Each 660.00
fixing with white cement as per site requirements with standard practice
for nominal dia 100 mm (4") and grating size 100 mm dia of weight not
less than 6 Kgs
126 BMW-C.41 Supplying & fixing CI floor traps 1st quality ISI marked conforming to Each 329.00
IS:1729-1979 with C.P. Grating fixing with white cement as per site
requirements with standard practice for nominal dia 75 mm (3") and
grating size 100 mm dia of weight not less than 4.0 Kgs
127 BMW-C.42 Labour charges only for fixing CI Nahany/ Floor traps with C.P. Grating Each 55.00
fixing with white cement as per site requirements with standard practice
128 BMW-C.43 Boxing of Nahany traps in RCC floors Each 178.00
129 BMW-C.44 Boxing of W.C Trap in R.C.C floors Each 356.00
130 BMW-C.45 Supplying & fixing CI Collars (double socket) Ist quality ISI marked Each 181.00
conforming to IS:1729-1979 with cement caulked joints and fixing as per
site requirements with standard practice for 76.20 mm (3") C.I. Pipe
D VITREOUS CHINAWARE - SANITARY APPLIANCES as per IS:2556 - 1974
(Materials shall be procured from the list of approved Brands/
Manufacturers/ Suppliers)
133 BMW-D.01 Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked Each 953.00
conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 580 mm Long
134 BMW-D.02 Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked Each 953.00
conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 630 mm Long
135 BMW-D.03 Labour charges only for fixing Indian pattern W.C with "P" or "S" trap Each 281.00
136 BMW-D.04 Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked Each 1,440.00
conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 580 mm x 440
mm
137 BMW-D.05 Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked Each 1,514.00
conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 630 mm x 450
mm
138 BMW-D.06 Labour charges only Fixing Orissa pan W.C with "P" or "S" trap Each 351.00
139 BMW-D.07 Supplying & Fixing porcelain foot rest for squatting I.W.C. (Rectangular Pair 231.00
pair) of sizes 250 mm x 125 mm x 15 mm thick each foot rest 1st quality
ISI marked conforming to IS:2556-Part-10:1974
140 BMW-D.08 Labour charges only for fixing porcelain foot rest for squatting I.W.C. Pair 64.00
(Rectangular pair)
141 BMW-D.09 Providing Brick masonry seat for Orissa pan/ Indian W.C. using 2nd class Each 298.00
bricks as per standard practice
142 BMW-D.10 Providing Cement Concrete Squatting plate for Orissa pan/ Indian W.C. in Each 89.00
P.C.C. 1:2:4 as per standard practice
96
SS RATE
2014-15
143 BMW-D.11 Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity with Each 2,304.00
internal components
144 BMW-D.12 Labour charges only for fixing low down porcelain flushing tank with Each 491.00
internal components
145 BMW-D.13 Supplying and Fixing European Water Closet of 1st quality conforming to Each 1,691.00
IS:2556-Part-2-1973 of white glazed with 'P' trap
146 BMW-D.14 Supplying and Fixing European Water Closet of 1st quality conforming to Each 1,785.00
IS:2556-Part-2-1973 of white glazed with 'S' trap
147 BMW-D.15 Labour charges only for fixing European Water Closet with 'P' or 'S' trap Each 246.00
as per standard practice
148 BMW-D.16 Supplying and Fixing best Indian make plastic seat and lid for European Each 461.00
water closets with rubber or plastic Buffers as per IS 2548-1996
149 BMW-D.17 Labour charges only for fixing plastic seat and lid for European water Each 71.00
closet
150 BMW-D.18 Supply, Installation and commissioning approved make floor mounted Each 8,808.00
Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush
porcelain cistern fixed on EWC with all internal parts of dual flush cistern,
ultra solid seat cover of approved make with rubber buffer and cap 15
mm angle stop cock 450 mm long PVC inter connection pipe wall flanges
all of approved make etc. complete for finished item of work in all
respects: White Colour
Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush
respects: Coloured - Grade - I/ Grade - II
close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush
respects: Special Colour - Grade - III
153 BMW-D.21 Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality Each 2,466.00
conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug,
chain, 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore
Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI brackets
including wooden block: 660 x 460 mm - Single C.P. Pillar cock
including wooden block: 630 x 450 mm - Double C.P. Pillar cock
97
SS RATE
2014-15
160 BMW-D.28 Labour charges only for fixing Indian make Flat Back Wash Hand Basin Each 351.00
with waste fittings like rubber plug, chain, 32 mm nominal size C.P.
Fitting Pillar Taps complete with standard CI brackets including wooden
block
161 BMW-D.29 Supplying and Fixing Pedestal for Wash Hand Basin (H.S.W / Parry / Each 1,142.00
Earthenware)
162 BMW-D.30 Labour charges only for fixing pedestal for wash hand basin Each 127.00
163 BMW-D.31 Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Parryware or Each 451.00
equivalent
164 BMW-D.32 Labour charges only for fixing bottle trap to the wash hand basin Each 49.00
165 BMW-D.33 Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x Each 845.00
265 mm x 315 mm with internal flushing rim fixed with screws complete
Indian make conforming to IS:2556-1995
166 BMW-D.34 Supplying & Fixing white glazed flat back half stall urinals 1st quality Each 2,536.00
conforming to IS:2556-1995 with standard C.P. Spreader of overall size
95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with
screws complete Indian make : 410 x 265 x 305 mm
167 BMW-D.35 Supplying & Fixing white glazed flat back half stall urinals 1st quality Each 2,818.00
conforming to IS:2556-1995 with standard C.P. Spreader of overall size
95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with
screws complete Indian make : 590 x 375 x 390 mm
168 BMW-D.36 Labour charges only Fixing flat back Bowl/ Half stall urinals with fixing Each 140.00
C.P. Spreader and screws complete
169 BMW-D.37 Supplying & Fixing Indian make white glazed vitreous china porcelain sink Each 4,508.00
conforming to IS:2556-Part-5-1994 on cantilever brackets with waste
fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with
parallel pipe thread conforming to IS:2963-1979 : 600 x 400 x 250
170 BMW-D.38 Supplying & Fixing Indian make white glazed vitreous china porcelain sink Each 5,072.00
conforming to IS:2556-Part-5-1994 on cantilever brackets with waste
fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with
parallel pipe thread conforming to IS:2963-1979 : 750 x 450 x 250
98
SS RATE
2014-15
171 BMW-D.39 Labour charges only for fixing Vitreous china porcelain sinks with waste Each 351.00
fittings, rubber plug, chain, cantilever brackets etc.
172 BMW-D.40 a) S & F 609.6 x 457.2 x 254 mm RCC terrazzo finished sink (or Each 719.00
constructed at site with 50.8mm thick) brass plug and chain including CI
cantilever brackets
173 BMW-D.41 b) - do - labour charges only Each 225.00
E TAPS & FAUCETS (Materials shall be procured from the list of approved
Brands/ Manufacturers/ Suppliers)
174 BMW-E.01 a) S & F 12.7 mm NP stop cock Indian make heavy duty Each 474.00
175 BMW-E.02 b) - do - labour charges only Each 29.00
176 BMW-E.03 a) S & F concealed stop cock 12.7 mm (1/2") Indian Make heavy duty Each 542.00
178 BMW-E.05 a) S & F angle stop cock 12.7 mm dia first quality Indian Make heavy Each 474.00
duty
180 BMW-E.07 a) S&F 12.7 mm N.P bib tap Indian make heavy dutys Each 407.00
182 BMW-E.09 a) S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 258.00
184 BMW-E.11 a)S & F 31.75 mm brass plumber Union best Indian first quality Each 69.00
186 BMW-E.13 a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 231.00
188 BMW-E.15 a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 204.00
190 BMW-E.17 a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 231.00
192 BMW-E.19 a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 204.00
194 BMW-E.21 S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Each 637.00
Indian make
195 BMW-E.22 S & F CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Each 611.00
Indian make
196 BMW-E.23 S & F 12.7mm heavy duty dia high neck pillar cock 1st quality Indian Each 1,165.00
make
197 BMW-E.24 a) S & F 12.7 mm heavy duty NP Swan Neck Pillar cock Each 1,165.00
199 BMW-E.26 a) S & F 12.7 mm heavy duty NP Sink cock Each 1,165.00
201 BMW-E.28 S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian make Each 611.00
202 BMW-E.29 S&F 12.7 mm dia NP push cock Ist quality Each 271.00
203 BMW-E.30 S&F 12.7 mm dia NP lift cock Ist quality Each 237.00
204 BMW-E.31 a)S & F 38.1 mm C.P waste coupling Half or Full Thread 1st Quality Each 237.00
Indian make Parryware or equivalent
206 BMW-E.33 a) S & F 31.75 mm PVC bottle trap Each 142.00
208 BMW-E.35 a) S& F 38.1 mm brass plumber union Each 69.00
210 BMW-E.37 a)S & F 19.05 mm heavy duty NP stop cock Indian make with ISI mark Each 611.00
F G.I. PIPES & FITTINGS (Materials shall be procured from the list of
approved Brands/ Manufacturers/ Suppliers)
212 BMW-F.01 S& F GI union 12.7 mm Ist Quality Each 41.00
99
SS RATE
2014-15
218 BMW-F.07 S& F GI connector 25.4 mm dia Each 82.00
219 BMW-F.08 S& F 12.7 mm GI 'T' A class Ist quality Each 50.00
220 BMW-F.09 S& F 31.75 mm dia GI bend Ist quality Each 75.00
221 BMW-F.10 S & F 31.75 mm dia GI 'T' 1st Quality Each 74.00
222 BMW-F.11 a) S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI mark Each 426.00
223 BMW-F.12 b) - do - labour charges only Each 44.00
224 BMW-F.13 a) S & F 19.05 mm copper ball cock ith PVC ball Indian make ISI mark Each 349.00
226 BMW-F.15 a)S & F 12.7 mm copper ball cock ith PVC ball Indian make ISI mark Each 226.00
228 BMW-F.17 a) S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian Each 914.00
make heavy type - 25 mm NB Size
234 BMW-F.23 a) S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian Each 1,368.00
244 BMW-F.33 a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve Each 402.00
as per IS-778 I-class heavy duty - 15 mm NB Size
248 BMW-F.37 a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve Each 1,884.00
250 BMW-F.39 a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve Each 2,706.00
254 BMW-F.43 a) Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as Each 307.00
per IS-778 I-class heavy duty - 15 mm NB Size
100
SS RATE
2014-15
262 BMW-F.51 a) Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as Each 1,217.00
264 BMW-F.53 a) Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as Each 1,761.00
266 BMW-F.55 a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Each 476.00
Class - I, Indian make heavy type - 15 mm NB Size
272 BMW-F.61 a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Each 1,655.00
278 BMW-F.67 a) S& F 15 mm Nominal Bore GI pipe Light Grade properties & weight as 1 RM 167.00
per IS 1239 ISI mark with GI fittings including the cost of pipe & its
fittings & labour charges complete
279 BMW-F.68 b) - do - labour charges only 1 RM 41.00
101
SS RATE
2014-15
290 BMW-F.79 a) S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight 1 RM 185.00
as per IS 1239 ISI mark with GI fittings including the cost of pipe & its
302 BMW-F.91 S & F 65 mm Nominal Bore GI pipe Medium Grade properties & weight 1 RM 811.00
as per IS 1239 with GI fittings such as elbows tees couplings, nipples,
plugs including excavation for trenches and refilling the trenches
complete except for GI bends union and GI connectors with checkout
and socket Tata or Zenith make or equivalent.
303 BMW-F.92 a)S & F 12.7 mm holder bat clamps Each 12.00
311 BMW-F.100 a) S & F 12.7 x 152.0 mm NP shower rose heavy Each 186.00
317 BMW-F.106 a) S & F 12.7 x 88.9 CP fancy shower Each 303.00
319 BMW-F.108 a) Supplying & fixing 12.7 mm GI drain pipe with plug for tanks (Mud Each 43.00
valve) including making a hole
102
SS RATE
2014-15
325 BMW-F.114 a) Taking branch water connection from the existing 25.4 mm GI pipe Each 144.00
including cutting threading, etc, complete with fitting
including cutting threading, etc, complete with fitting,
including cutting threading, etc, complete with fitting,
331 BMW-F.120 Supplying & fixing leather washers for 12.7 mm bib tap and stop cock Each 1.00
332 BMW-F.121 Supplying & fixing leather washers for 19.05 mm bib tap and stop cock Each 3.00
333 BMW-F.122 Supplying & Fixing 12.7 mm fibre washers Each 3.00
334 BMW-F.123 Supplying & Fixing 19.05 mm fibre washers Each 3.00
G PVC PIPES & FITTINGS (Materials shall be procured from the list of
approved Brands/ Manufacturers/ Suppliers)
335 BMW-G.01 a) Providing & Placing on Terrace (at all floor levels) polyethylene water 1 Lit 6.00
storage tank with Double layer approved brand & manufacture with
cover and suitable locking arrangement & making necessary holes for
inlet & outlets and over flow pipes but without fittings & base support
for tanks
336 BMW-G.02 b) - do - labour charges only 1 Lit 1.00
337 BMW-G.03 Supply of Plastic storage tank lid with hinges Each 76.00
338 BMW-G.04 Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 47.00
339 BMW-G.05 Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm Each 26.00
length of Ist quality
340 BMW-G.06 Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 89.00
341 BMW-G.07 Supply & fixing Fancy PVC shelf including all fittings Each 212.00
342 BMW-G.08 Supply & fixing of PVC low level system with internal components & Each 1,455.00
short bend: 10 Litres capacity Single Flush
343 BMW-G.09 Supply & fixing of PVC low level system with internal components & Each 1,708.00
short bend: 10 litres capacity Dual Flush
344 BMW-G.10 Supply & fixing of PVC low level system with internal components & Each 823.00
short bend: 8 Litres capacity single Flush
345 BMW-G.11 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 255.00
346 BMW-G.12 90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 405.00
348 BMW-G.14 75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 288.00
351 BMW-G.17 75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 179.00
354 BMW-G.20 75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 191.00
356 BMW-G.22 110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe - 4 Each 356.00
Kg/sq.cm
357 BMW-G.23 75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 132.00
360 BMW-G.26 75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 111.00
366 BMW-G.32 160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 1,153.00
103
SS RATE
2014-15
368 BMW-G.34 90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 696.00
378 BMW-G.44 110 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe - 6 Each 567.00
Kg/sq.cm
388 BMW-G.54 160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm Each 1,885.00
389 BMW-G.55 75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings Each 50.00
392 BMW-G.58 75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings Each 67.00
395 BMW-G.61 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 39.00
398 BMW-G.64 75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 67.00
401 BMW-G.67 75 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 59.00
404 BMW-G.70 75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 73.00
407 BMW-G.73 75 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 125.00
410 BMW-G.76 75 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 200.00
413 BMW-G.79 75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 74.00
416 BMW-G.82 75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 95.00
419 BMW-G.85 75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 102.00
104
SS RATE
2014-15
422 BMW-G.88 75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 132.00
425 BMW-G.91 75 mm dia - Coupler - UPVC/SWR Pipe fittings Each 35.00
428 BMW-G.94 90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 59.00
431 BMW-G.97 63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 9.00
435 BMW-G.101 40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings - Pipe Clip - UPVC/SWR Each 11.00
Pipe fittings
436 BMW-G.102 50 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 14.00
440 BMW-G.106 110 mm - Pipe Clip - UPVC/SWR Pipe fittings Each 18.00
442 BMW-G.108 P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 188.00
443 BMW-G.109 P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 208.00
444 BMW-G.110 P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 238.00
445 BMW-G.111 P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 219.00
446 BMW-G.112 Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings Each 227.00
447 BMW-G.113 Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings Each 330.00
448 BMW-G.114 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe Each 112.00
fittings
449 BMW-G.115 3" (76.2 mm ) Nahany Trap ( without Jali without inlet)UPVC/SWR Pipe Each 87.00
fittings
450 BMW-G.116 4" (101.6 mm ) Nahany Trap ( without inlet with out Jali)UPVC/SWR Pipe Each 108.00
fittings
451 BMW-G.117 Mini Trap - UPVC/SWR Pipe fittings Each 53.00
452 BMW-G.118 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings Each 102.00
453 BMW-G.119 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings Each 144.00
454 BMW-G.120 4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe fittings Each 112.00
455 BMW-G.121 Round Jali - UPVC/SWR Pipe fittings Each 24.00
456 BMW-G.122 Square tile & Jalli - UPVC/SWR Pipe fittings Each 39.00
457 BMW-G.123 Pipe connector ( with LIP ring) - UPVC/SWR Pipe fittings Each 151.00
458 BMW-G.124 Pipe connector ( with out LIP ring) - UPVC/SWR Pipe fittings Each 117.00
459 BMW-G.125 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings Each 138.00
460 BMW-G.126 5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings Each 146.00
461 BMW-G.127 75 mm dia - Door cap - UPVC/SWR Pipe fittings Each 57.00
464 BMW-G.130 75 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 53.00
467 BMW-G.133 75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe fittings Each 8.00
470 BMW-G.136 75 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 9.00
105
SS RATE
2014-15
473 BMW-G.139 LIP ring 110 mm - UPVC/SWR Pipe fittings Each 69.00
474 BMW-G.140 Rubber Lubricant - 100 Grams Each 29.00
478 BMW-G.144 P' Trap with lip UPVC/SWR Pipe fittings Each 298.00
479 BMW-G.145 50 ml - Solvent Cement Each 15.00
484 BMW-G.150 110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe fittings Each 90.00
485 BMW-G.151 160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe fittings Each 224.00
486 BMW-G.152 Labour charges for laying, fixing and commissioning the PVC pipes 1 RM 65.00
including couplers/ bends/ tees etc any diameter including fixing
necessary fittings like bends, plugs, couplers, junctions, tees, etc with
solvent jointing as per standard practice
H CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS: 3989 - 1984
487 BMW-H.01 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1,500.00
490 BMW-H.04 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Double socket Each 1,665.00
491 BMW-H.05 100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Double socket Each 2,247.00
492 BMW-H.06 75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1,349.00
496 BMW-H.10 75 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 982.00
498 BMW-H.12 75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 1,032.00
499 BMW-H.13 100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 1,281.00
500 BMW-H.14 75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) fittings Each 358.00
501 BMW-H.15 100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) fittings Each 411.00
502 BMW-H.16 75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) fittings Each 513.00
503 BMW-H.17 100 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) fittings Each 589.00
504 BMW-H.18 150 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) fittings Each 1,125.00
505 BMW-H.19 75 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) fittings Each 707.00
506 BMW-H.20 100 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) fittings Each 781.00
507 BMW-H.21 150 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) fittings Each 1,409.00
512 BMW-H.26 75 mm dia Plain Bend - CI (Spun) fittings Each 368.00
513 BMW-H.27 100 mm dia Plain Bend - CI (Spun) fittings Each 433.00
514 BMW-H.28 150 mm dia Plain Bend - CI (Spun) fittings Each 1,033.00
515 BMW-H.29 75 mm dia Door Bend - CI (Spun) fittings Each 381.00
516 BMW-H.30 100 mm dia Door Bend - CI (Spun) fittings Each 494.00
517 BMW-H.31 150 mm dia Door Bend - CI (Spun) fittings Each 1,130.00
518 BMW-H.32 75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 368.00
519 BMW-H.33 100 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 433.00
520 BMW-H.34 150 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 1,033.00
521 BMW-H.35 75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 381.00
522 BMW-H.36 100 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 494.00
106
SS RATE
2014-15
523 BMW-H.37 150 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 1,130.00
524 BMW-H.38 Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI (Spun) fittings Each 750.00
525 BMW-H.39 Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI (Spun) fittings Each 875.00
526 BMW-H.40 75 mm dia Heel Rest Bend - CI (Spun) fittings Each 392.00
527 BMW-H.41 100 mm dia Heel Rest Bend - CI (Spun) fittings Each 501.00
528 BMW-H.42 150 mm dia Heel Rest Bend - CI (Spun) fittings Each 1,065.00
529 BMW-H.43 75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 494.00
530 BMW-H.44 100 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 666.00
531 BMW-H.45 150 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 1,375.00
532 BMW-H.46 75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 582.00
533 BMW-H.47 100 mm dia Single Branch Door "T" - CI (Spun) fittings Each 773.00
534 BMW-H.48 150 mm dia Single Branch Door "T" - CI (Spun) fittings Each 1,452.00
535 BMW-H.49 75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 582.00
536 BMW-H.50 100 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 773.00
537 BMW-H.51 150 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 1,704.00
538 BMW-H.52 75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 638.00
539 BMW-H.53 100 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 853.00
540 BMW-H.54 150 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 1,836.00
541 BMW-H.55 75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 675.00
542 BMW-H.56 100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 908.00
543 BMW-H.57 75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 752.00
544 BMW-H.58 100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 947.00
545 BMW-H.59 75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 752.00
546 BMW-H.60 100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 947.00
547 BMW-H.61 75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 793.00
548 BMW-H.62 100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 1,028.00
549 BMW-H.63 75 mm dia Shoe Bend - CI (Spun) fittings Each 465.00
550 BMW-H.64 100 mm dia Shoe Bend - CI (Spun) fittings Each 544.00
551 BMW-H.65 150 mm dia Shoe Bend - CI (Spun) fittings Each 1,105.00
552 BMW-H.66 75 mm dia Collar - CI (Spun) fittings Each 318.00
555 BMW-H.69 75 mm dia Cowl - CI (Spun) fittings Each 281.00
558 BMW-H.72 75 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) fittings Each 407.00
561 BMW-H.75 75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 445.00
562 BMW-H.76 100 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 582.00
563 BMW-H.77 150 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 1,161.00
564 BMW-H.78 75 mm dia Long Door Bend - CI (Spun) fittings Each 936.00
565 BMW-H.79 100 mm dia Long Door Bend - CI (Spun) fittings Each 1,007.00
566 BMW-H.80 75 mm dia Hand Hole pipe ( Inspection pipe) Each 538.00
569 BMW-H.83 75 mm dia P Traps - CI (Spun) fittings Each 582.00
570 BMW-H.84 100 mm dia P Traps - CI (Spun) fittings Each 798.00
571 BMW-H.85 4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI (Spun) fittings Each 915.00
572 BMW-H.86 4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI (Spun) fittings Each 915.00
573 BMW-H.87 4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI (Spun) fittings Each 568.00
574 BMW-H.88 6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI (Spun) fittings Each 778.00
575 BMW-H.89 3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia - CI (Spun) fittings Each 486.00
576 BMW-H.90 3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia - CI (Spun) fittings Each 758.00
577 BMW-H.91 3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia - CI (Spun) fittings Each 758.00
107
SS RATE
2014-15
578 BMW-H.92 3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia - CI (Spun) fittings Each 758.00
579 BMW-H.93 4" x 3" (101.6 mm x 76.2mm ) Plain T 75 mm dia - CI (Spun) fittings Each 758.00
580 BMW-H.94 4" x 3" (101.6 mm x 76.2mm ) Door T 75 mm dia - CI (Spun) fittings Each 803.00
581 BMW-H.95 4" x 3" (101.6 mm x 76.2mm ) Plain Y 75 mm dia - CI (Spun) fittings Each 803.00
582 BMW-H.96 4" x 3" (101.6 mm x 76.2mm ) Door Y 75 mm dia - CI (Spun) fittings Each 857.00
583 BMW-H.97 6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI (Spun) fittings Each 1,122.00
584 BMW-H.98 6" x 4" (152.4 mm x101.6 mm ) Door T 75 mm dia - CI (Spun) fittings Each 1,216.00
585 BMW-H.99 6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI (Spun) fittings Each 1,286.00
586 BMW-H.100 6" x 4" (152.4 mm x101.6 mm ) Door Y 75 mm dia - CI (Spun) fittings Each 1,572.00
587 BMW-H.101 75 mm dia Plain " T" 27 " (685.8 mm ) Special Types of Long Fittings Each 1,629.00
588 BMW-H.102 100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of Long CI (Spun) Each 2,288.00
fittings
589 BMW-H.103 75 mm dia Door "T" 27" (685.8 mm ) Special Types of Long CI (Spun) Each 1,819.00
fittings
590 BMW-H.104 100mm dia Door "T" 27" (685.8 mm ) Special Types of Long CI (Spun) Each 2,514.00
fittings
591 BMW-H.105 75 mm dia Plain " Y" 27" (685.8 mm) Special Types of Long CI (Spun) Each 1,819.00
fittings
592 BMW-H.106 100mm dia Plain " Y" 27" (685.8 mm) Special Types of Long CI (Spun) Each 2,514.00
fittings
593 BMW-H.107 75 mm dia Door " Y" 27" (685.8 mm) Special Types of Long CI (Spun) Each 2,028.00
fittings
594 BMW-H.108 100mm dia Door " Y" 27" (685.8 mm) Special Types of Long CI (Spun) Each 2,760.00
fittings
I MISCELLANEOUS ITEMS
595 BMW-I.01 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 61.00
596 BMW-I.02 b) - do - labour charges only Each 19.00
597 BMW-I.03 a) Supplying & Fixing solution joints up to 50.8 dia Ist quality. Each 12.00
599 BMW-I.05 Chiselling the stone masonry wall for fixing of wooden blocks including Each 28.00
finishing as directed by the department
600 BMW-I.06 Chiselling the stone masonry wall and repairs as directed by the 1 Rm 133.00
department.
601 BMW-I.07 Chiselling the brick masonry wall and repairs as directed by the 1 Rm 28.00
department.
602 BMW-I.08 a) S & F NP telephonic shower spray set & valve mixer with rest and all Each 2,167.00
fittings complete (ARK/ESSCO or equivalent make)
604 BMW-I.10 a) S & F NP shower spray fancy with NP Flexible pipe Each 576.00
606 BMW-I.12 a) S & F NP cover for Nahany trap Each 31.00
608 BMW-I.14 a) Painting the flushing tank with white enamel paint Each 105.00
610 BMW-I.16 S & F internal fittings for flush tank Parryplast wonder flush or equivalent Each 657.00
611 BMW-I.17 Repairing and over hauling flushing tank Each 87.00
612 BMW-I.18 a) Supplying & Fixing NP chain rubber and plug for basin Each 42.00
614 BMW-I.20 a) S & F 25.4 mm dia & 609.6 mm long aluminium anodized towel rod Each 164.00
with brackets and aluminium screws
616 BMW-I.22 a) S & F 19.04 mm dia & 609.6 mm long aluminium anodized towel rod Each 142.00
with brackets and aluminium screws
618 BMW-I.24 a) S & F 609.6 mm long 127 mm wide plate glass shelf with superior Each 209.00
quality aluminium railing complete with aluminium screws
108
SS RATE
2014-15
620 BMW-I.26 a) S & F 609.6 mm long 127 mm wide plate glass shelf only Each 69.00
622 BMW-I.28 a) S & F NP soap dish heavy type with NP SCREWS Each 243.00
624 BMW-I.30 a) S &F NP holder brackets with screws Each 48.00
626 BMW-I.32 a) S & F liquid soap container NP metallic with NP brackets and screws. Each 243.00
628 BMW-I.34 a) S & F 31.75 mm C.P TRAPS Each 314.00
630 BMW-I.36 a) Supplying & fixing 88.9 mm A.C cowls Each 71.00
632 BMW-I.38 a) Supplying & fixing A.C Cowl 63.5 mm dia Each 48.00
634 BMW-I.40 Removing and refixing W.C s Each 228.00
635 BMW-I.41 Removing and refixing wash hand basins of any size with fittings Each 205.00
complete
636 BMW-I.42 a) S & F 76.2 x 101.6 mm teak wood block complete Each 26.00
638 BMW-I.44 Cutting holes in C.C; basement & repairs Labour charges only Each 100.00
639 BMW-I.45 Cutting holes in stone masonry & basement and repairs Labour charges Each 67.00
only
640 BMW-I.46 Cutting holes in Brick masonry & repairs Labour charges only Each 44.00
641 BMW-I.47 Cutting holes in RCC slab floor & repairs Labour charges only Each 67.00
642 BMW-I.48 a) Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P Each 102.00
coated
644 BMW-I.50 a) S & F 12.7 mm .M.P couplings Each 35.00
646 BMW-I.52 a) S & F 19.05 mm M.P couplings Each 42.00
648 BMW-I.54 a) S& F MP coupling 25.4 mm dia Each 95.00
649 BMW-I.55 a) S & F PVC Rubber adopter for LLC and bend Each 19.00
651 BMW-I.57 a) S& F 31.75 mm Brass union nuts Each 35.00
653 BMW-I.59 a) S& F 38.1 mm Brass union nuts Each 37.00
655 BMW-I.61 a) Constructing Brick masonry chamber over the gully trap or peet valve Each 455.00
and fitted with 304.8 x 228.6 m size CI frame and hinged cover.
657 BMW-I.63 a) Constructing Brick masonry support for G.I pipe with C.M 304.8 x Each 73.00
228.6 x228.6 mm size including plastering and finishing etc. complete.
659 BMW-I.65 a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover over gully taps Each 119.00
661 BMW-I.67 a) Supplying & fixing CI Nahany trap grating Each 19.00
663 BMW-I.69 a) Supplying & fixing CI gully trap grating Each 48.00
665 BMW-I.71 a) Supplying & fixing valves for brass ball cocks 25.4 mm dia Each 19.00
667 BMW-I.73 a) Supplying & fixing 12.7 m valve for bib tap or stop cocks Each 18.00
669 BMW-I.75 a) Supplying & fixing 19.05 m valve for bib tap or stop cocks Each 39.00
109
SS RATE
2014-15
671 BMW-I.77 Removing 12.7 mm GI pipe and refixing the same Mr. 63.00
674 BMW-I.80 Removing 38.1 mm GI pipe and refixing the same Rm 132.00
675 BMW-I.81 Removing 50.8 mm GI pipe and refixing the same Rm 154.00
676 BMW-I.82 Cleaning the W.C with acid and Vim powder Each 43.00
677 BMW-I.83 Cleaning the Urinal with acid and Vim power Each 43.00
678 BMW-I.84 Cleaning the wash basin with acid and Vim powder Each 43.00
679 BMW-I.85 Cleaning the E.W.C with acid and Vim power Each 43.00
680 BMW-I.86 Supplying & fixing 914.4 x 457.2 mm CI man hole frame and cover (light Each 1,939.00
weight) 30 Kgs
681 BMW-I.87 Supplying & fixing 602 x 602 mm CI man hole frame and cover (light Each 2,887.00
weight) 30 Kgs
683 BMW-I.89 a) Supplying & fixing CI steps for septic tank. Each 62.00
685 BMW-I.91 a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for 914.4 Each 1,247.00
mm dia chamber (20 Kgs - Light weight)
687 BMW-I.93 a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for 914.4 Each 2,575.00
mm dia chamber (Medium weight) as per IS:1726 - 40 Kgs
689 BMW-I.95 Cost. 50.8 mm thick RCM baffle wall with 2.267 Kg steel & rabbit wire 1 Sqm 251.00
mesh in CM 1:3 with fine rendering in neat cement labour charges Only
690 BMW-I.96 a) Cost. 50.8 mm RCC partition wall 1 Sqm 273.00
691 BMW-I.97 b) - do - labour charges only 1 Sqm 44.00
692 BMW-I.98 a) S & F double layer of bamboo matting tarred on both sides. 10 624.00
Sqm
693 BMW-I.99 b) - do - labour charges only 10 123.00
Sqm
694 BMW-I.100 Removing of 101.6 m or 76.2 mm CI pipe 1 RM 36.00
695 BMW-I.101 a) Supplying & fixing 76.2 mm W.I clamps Each 25.00
697 BMW-I.103 a) Supplying & fixing NP coat hook Each 47.00
699 BMW-I.105 a) Supplying and fixing TV shape mirror with plastic frame size 609.6 mm Each 513.00
x 457 .2 mm
701 BMW-I.107 a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 10.00
703 BMW-I.109 a) Supplying & fixing 19.06 mm dia GI plug Each 14.00
705 BMW-I.111 a) Supplying and fixing 38.1 mm dia of GI plug Each 72.00
707 BMW-I.113 a) Supplying & fixing 50.8 mm dia of GI PLUG Each 110.00
709 BMW-I.115 a) Supplying & fixing 76.2 mm dia of GI PLUG Each 200.00
711 BMW-I.117 a) Supplying & fixing C.P flange. Each 26.00
713 BMW-I.119 a) Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) Each 6,865.00
1 mm thick with accessories
715 BMW-I.121 a) Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 " Each 5,412.00
(609.6 x 457.2 x 203.2mm) 1 mm thick with accessories
110
SS RATE
2014-15
717 BMW-I.123 a) Supplying & fixing stainless steel sink size 20" x18" x 8 " Each 4,905.00
(508x457.2x203.2mm) 1 mm thick with accessories
719 BMW-I.125 Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed porcelain Each 495.00
channel fixed in brick masonry white cement pointing.
720 BMW-I.126 Supply & Fixing of steel surgical long elbow action handle 12.7 mm dia Each 990.00
bib cock Indian make heavy type including all materials
721 BMW-I.127 Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark with 2 Nos. Each 5,420.00
flanges, 8 nos, 3/4" dia nuts & bolts and all necessary washers and
packing materials etc. complete
722 BMW-I.128 Supply & fixing porcelain P' trap Each 233.00
723 BMW-I.129 Supplying & fixing oval shape basin white (520x410mm) parry or Each 2,481.00
equivalent
724 BMW-I.130 Supply & fixing RCC cover 22" dia with nominal reinforcement 3 " thick Each 705.00
and hooks for lifting
725 BMW-I.131 Supply & fixing cp spl. Grating with frame and cover of 1st quality Each 63.00
726 BMW-I.132 Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 396.00
727 BMW-I.133 Supply & fixing of LLC handle set 1st quality Each 79.00
728 BMW-I.134 Mechanical Cleaning of water sumps with pumps & UV disinfecting 1000 55.00
Lit
729 BMW-I.135 Supply & fixing 4" dia CP thimble pipe: 150 mm long Each 413.00
732 BMW-I.138 Supply & fixing CP long bend Each 349.00
733 BMW-I.139 Supply & fixing CP short bend Each 175.00
734 BMW-I.140 Supplying & fixing 15 mm bib tap with flange Chromeum plated Jaquar Each 1,721.00
make queen series
735 BMW-I.141 Supply & fixing bib cock cum health faucet with 1 m long flexible tube Each 4,360.00
and wall hook of Jaquar make queen series with 7 years warranty
Chrome plated
736 BMW-I.142 Supply & fixing bib cock cum health faucet with 1 m long flexible tube Each 7,332.00
and wall hook of Jaquar make queen series with 7 years warranty: Ivory
gold
737 BMW-I.143 Supply & fixing pillar cock Jaquar make Queen series with 7 years Each 1,806.00
warranty: Chrome plated
738 BMW-I.144 Supply & fixing pillar cock Jaquar make Queen series with 7 years Each 3,084.00
warranty: Ivory gold
739 BMW-I.145 Supply & fixing Angular stop cocks with wall flange Jaquar make Queen Each 1,783.00
series with 7 years warranty: Chrome plated
740 BMW-I.146 Supply & fixing Angular stop cocks with wall flange Jaquar make Queen Each 3,453.00
series with 7 years warranty: Ivory gold
741 BMW-I.147 Supply & fixing Waste coupling 32 mm size full thread with 80 mm Each 400.00
height Jaquar make with 7 years warranty: Chrome plated
742 BMW-I.148 Supply & fixing of Bottle trap Jaquar make with 7 years warranty: Each 1,704.00
Chrome plated
743 BMW-I.149 Supply & fixing of Bottle trap Jaquar make with 7 years warranty: Ivory Each 2,882.00
gold
744 BMW-I.150 Supply & Fixing copper pipe 450 mm long with nuts & washers Jaquar Each 419.00
make with 7 years warranty: Chrome plated
745 BMW-I.151 Supply & Fixing copper pipe 450 mm long with nuts & washers Jaquar Each 811.00
make with 7 years warranty: Ivory gold
746 BMW-I.152 Supply and fixing wall mirror with provision for over head shower and Each 5,509.00
115 mm long bend pipe with wall flange Jaquar make queen series with
7 years warranty: Chrome plated
111
SS RATE
2014-15
747 BMW-I.153 Supply and fixing wall mirror with provision for over head shower and Each 8,666.00
115 mm long bend pipe with wall flange Jaquar make queen series with
7 years warranty: Ivory gold
748 BMW-I.154 Supply & fixing overhead shower rose with revolving joint and 150 mm Each 2,556.00
long swivel shower arm Jaquar make queen series. with 7 years
749 BMW-I.155 Supply & fixing overhead shower rose with revolving joint and 150 mm Each 3,745.00
long swivel shower arm Jaquar make queen series. with 7 years
warranty: Ivory Gold
750 BMW-I.156 Supply and Fixing Wall Mixer with Telephonic shower arrangement with Each 14,600.00
crutch and flexible pipe Jaquar series Ivory gold colour for bath tub. with
7 years warranty
751 BMW-I.157 Supply & fixing Bath tub overflow set complete with over flow cap, 450 Each 1,778.00
mm Ball chain with rubber plug & union bend with brass nut Jaquar
make, Ivory gold colour. with 7 years warranty
752 BMW-I.158 Supply & fixing sink cock with regular swinging spout with wall flange Each 2,554.00
chromeplated Jaquar make Queen series with 7 years warranty
753 BMW-I.159 Supply & fixing soap dish Jaquar make queen series: with 7 years Each 1,676.00
754 BMW-I.160 Supply & fixing soap dish Jaquar make queen series: with 7 years Each 2,460.00
755 BMW-I.161 Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 Each 1,350.00
years warranty: Chrome plated
756 BMW-I.162 Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 Each 2,377.00
years warranty: Ivory Gold
757 BMW-I.163 Supply & Fixing of Towel ring Jaquar make Queen series with 7 years Each 1,269.00
758 BMW-I.164 Supply & Fixing of Towel ring Jaquar make Queen series with 7 years Each 2,073.00
759 BMW-I.165 Supply & Fixing of towel coat hook Jaquar make Queen series with 7 Each 944.00
years warranty: Chrome plated
760 BMW-I.166 Supply & Fixing of towel coat hook Jaquar make Queen series with 7 Each 1,954.00
years warranty: Ivory Gold
761 BMW-I.167 Supply & Fixing of Towel rod 24 " Jaquar make Queen series Ivory gold Each 3,240.00
colour with 7 years warranty
762 BMW-I.168 Supply & Fixing of Tumbler holder Jaquar make Queen series, Ivory gold Each 2,271.00
763 BMW-I.169 Supply & fixing of Glass shelf 22" Jaquar make Queen series, Ivory gold Each 4,428.00
764 BMW-I.170 Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall Each 3,213.00
hook of Jaquar Continental series, Chrome Finish with 7 years warranty
765 BMW-I.171 Supply & Fixing of Bibcock Jaquar Continental series, Chrome Finish with Each 944.00
7 years warranty
766 BMW-I.172 Supply & Fixing of Pillar cock Jaquar Continental series, Chrome Finish Each 1,173.00
with 7 years warranty
767 BMW-I.173 Supply & Fixing of Angular stopcock with wall flange Jaquar Continental Each 873.00
series, Chrome finish with 7 years warranty
768 BMW-I.174 Supply fixing of Waste coupling Jaquar make, Chrome finish with 7 years Each 379.00
warranty
769 BMW-I.175 Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7 years Each 1,704.00
warranty
770 BMW-I.176 Supply & Fixing of copper pipe 450mm long with nuts & washers Jaquar Each 379.00
make, Chrome Finish with 7 years warranty
112
SS RATE
2014-15
771 BMW-I.177 Supply & Fixing of Wall Mixer with provision for overhead shower and Each 4,126.00
115mm long bend pipe with wall flange Jaquar make Continental series,
Chrome finish with 7 years warranty
772 BMW-I.178 Supply & Fixing of Exclusive overhead shower with 190mm long light Each 1,762.00
body shower arm Jaquar make Continental series, Chrome finish with 7
years warranty
773 BMW-I.179 Supply & Fixing wall mixer with telephonic shower arrangement with Each 5,761.00
crutch and telephone shower with flexible tube Jaquar make Continental
series Chrome colour for bath tub with 7 years warranty
774 BMW-I.180 Supply & Fixing bath tub over flow set complete with over flow Each 1,345.00
cap,450mm ball chain with rubber plug 7 Union bend with brass nuts
Jaquar make, Chrome colour with 7 years warranty
775 BMW-I.181 Supply & Fixing Sink cock with regular swinging spout with flange chrome Each 1,660.00
plated Jaquar make Continental series with 7 years warranty
776 BMW-I.182 Supply & Fixing soap dish Jaquar make Continental series, Chrome Finish Each 1,308.00
with 7 years warranty
777 BMW-I.183 Supply & Fixing of Toilet paper holder Jaquar make Continental series, Each 873.00
778 BMW-I.184 Supply & Fixing of Towel Ring Jaquar make Continental series, Chrome Each 1,004.00
finish with 7 years warranty
779 BMW-I.185 Supply & Fixing Double coat hook Jaquar make Continental series, Each 750.00
780 BMW-I.186 Supply & Fixing of towel rail 24'' Jaquar make Continental series, Chrome Each 1,621.00
finish with 7 years warranty
781 BMW-I.187 Supply & Fixing of Tumbler holder Jaquar make Continental series, Each 1,093.00
782 BMW-I.188 Supply & Fixing of Glass shelf 22'' Jaquar make Continental series, Each 2,149.00
783 BMW-I.189 Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall Each 3,844.00
hook of Jaquar Florentine(Quarter turn) series, Chrome Finish with 7
years warranty
784 BMW-I.190 Supply & Fixing of Bibcock Jaquar Florentine (Quarter turn)series, Each 1,296.00
Chrome Finish with 7 years warranty
785 BMW-I.191 Supply & Fixing of Pillar cock Jaquar Florentine(Quarter turn) series, Each 1,296.00
Chrome Finish with 7 years warranty
786 BMW-I.192 Supply & Fixing of Angular stopcock with wall flange Jaquar Florentine( Each 1,275.00
Quarter turn)series, Chrome finish with 7 years warranty
787 BMW-I.193 Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7 years Each 1,704.00
warranty
788 BMW-I.194 Supply & Fixing of Wall Mixer with provision for overhead shower and Each 4,978.00
115mm long bend pipe with wall flange Jaquar make Florentine(Quarter
turn) series, Chrome finish with 7 years warranty
789 BMW-I.195 Supply & Fixing wall mixer with telephonic shower arrangement with Each 7,503.00
crutch and telephone shower with flexible tube Jaquar make
Florentine(Quarter turn) series Chrome colour for bath tub with 7 years
warranty
790 BMW-I.196 Supply & Fixing Sink cock with regular swinging spout with flange chrome Each 1,989.00
plated Jaquar make Florentine(Quarter turn) series with 7 years warranty
791 BMW-I.197 Supply & Fixing of Rose shower with revolving ball joint & 115mm long Each 2,113.00
shower arm with 7 years warranty
792 BMW-I.198 Supply & Fixing of Jaquar make chrome plated Metro pole flush valve Each 3,700.00
concealed type with cover plate 40mm size with 7 years warranty
793 BMW-I.199 Supply & Fixing of Jaquar make Sensotronic sensor faucet for wash basin, Each 14,532.00
Chrome plated with 7 years warranty
113
SS RATE
2014-15
794 BMW-I.200 Supply & fixing of Jaquar make Sensotronic concealed type flushing valve Each 14,532.00
for urinal complete set with installation box with control cock, Chrome
plated with 7 years warranty
795 BMW-I.201 Supply & fixing of Jaquar make Auto closing system pillar cock for wash Each 2,408.00
basin, Chrome plated with 7 years warranty
796 BMW-I.202 Supply& Fixing of Jaquar make Auto Closing system Bibcock, Chrome Each 2,526.00
plated with 7 years warranty
797 BMW-I.203 S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite 1 RM 157.00
pressure pipes conforming to IS-15450-2004 with UV stabilized, carbon
black for hot & cold water supply, capable to withstand pressure up to
80 C including all special composite fittings, plastic & brass blend inserts
for elbows, tees, reducers, couplers, connectors etc complete for
external works including laying pipes, fixing in position, testing and
commissioning etc : 16 mm OD pipe
commissioning etc : 25mm OD pipe
for elbows, tees, reducers, couplers, connectors etc complete with MS
Iron clamps at 1.0 M spacing including cutting, chasing walls, making
good, laying pipes, fixing in position, testing and commissioning etc 16
mm OD pipe
114
SS RATE
2014-15
mm OD pipe
good, laying pipes, fixing in position, testing and commissioning etc
25mm OD pipe
mm OD pipe
mm OD pipe
mm OD pipe
809 BMW-I.215 S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite 1 RM 185.00
for elbows, tees, reducers, couplers, connectors etc complete including
excavating trenches up to 1.0 M deep laying pipes, fixing in position,
testing, refilling excavated earth and commissioning etc 16 mm OD pipe
testing, refilling excavated earth and commissioning etc 25mm OD pipe
115
SS RATE
2014-15
Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC
Pipes and Fittings to meet the requirement of ASTM-D 2846 and are
produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR
11 and SDR 13.5 pipes are made from idential CPVC compounds having
the same physical Properties for Hot and Cold Water (IS 15778:2007)
814 BMW-I.220 15.90mm OD Pipe - SDR 13.5 1 RM 141.00
820 BMW-I.226 15.90mm OD Pipe - SDR 11 1 RM 156.00
826 BMW-I.232 Supply of 20mm x 1.9mm PN 10/PPR pipe conforming to DIN Standards 1 RM 48.00
8077/ 8078
8077/ 8078
8077/ 8079
8077/ 8079
8077/ 8080
8077/ 8081
8077/ 8082
8077/ 8083
834 BMW-I.240 Supply of 110mm x 10mm PN 10/PPR pipe conforming to DIN Standards 1 RM 1,427.00
8077/ 8084
8077/ 8078
8077/ 8078
8077/ 8079
8077/ 8079
116
SS RATE
2014-15
8077/ 8080
8077/ 8081
8077/ 8082
842 BMW-I.248 Supply of 90mm x 12.3mm PN 16/PPR pipe conforming to DIN Standards 1 RM 1,425.00
8077/ 8083
843 BMW-I.249 Supply of 110mm x 15.1mm PN 16/PPR pipe conforming to DIN 1 RM 2,134.00
Standards 8077/ 8084
8077/ 8078
8077/ 8078
8077/ 8079
8077/ 8079
8077/ 8080
8077/ 8081
850 BMW-I.256 Supply of 75mm x 12.5mm PN 20/PPR pipe conforming to DIN Standards 1 RM 1,162.00
8077/ 8082
851 BMW-I.257 Supply of 90mm x 15mm PN 20/PPR pipe conforming to DIN Standards 1 RM 1,579.00
8077/ 8083
852 BMW-I.258 Supply of 110mm x 18.3mm PN 20/PPR pipe conforming to DIN 1 RM 2,487.00
853 BMW-I.259 Supply of 20mm PPR Socket conforming to DIN Standards 8077/ 8084 1 RM 11.00
862 BMW-I.268 Supply of 32mm PPR Core Flange conforming to DIN Standards 8077/ Each 42.00
8086
8087
8088
8089
8090
8091
8092
869 BMW-I.275 Supply of 20mm PPR Elbow conforming to DIN Standards 8077/ 8084 Each 18.00
117
SS RATE
2014-15
877 BMW-I.283 Supply of 110mm PPR Elbow conforming to DIN Standards 8077/ 8092 Each 1,530.00
878 BMW-I.284 Supply of 20mm PPR Tee conforming to DIN Standards 8077/ 8084 Each 16.00
886 BMW-I.292 Supply of 110mm PPR Tee conforming to DIN Standards 8077/ 8092 Each 1,598.00
887 BMW-I.293 Supply of 20mm PPR End Cap conforming to DIN Standards 8077/ 8084 Each 7.00
896 BMW-I.302 Supply of 25mm x 20mm PPR Reducer conforming to DIN Standards Each 13.00
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
118
SS RATE
2014-15
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
8077/ 8092
919 BMW-I.325 Supply of 25mm x 20mm x 25mm PPR Reducer Tee conforming to DIN Each 35.00
938 BMW-I.344 Supply of 110mm x 75mm x 110mm PPR Reducer Tee conforming to DIN Each 1,459.00
939 BMW-I.345 Supply of 110mm x 90mm x 110mm PPR Reducer Tee conforming to DIN Each 1,517.00
940 BMW-I.346 Supply of 20mm x ½” PPR Female Threaded Adaptor conforming to DIN Each 112.00
119
SS RATE
2014-15
942 BMW-I.348 Supply of 25mm x ¾” PPR Female Threaded Adaptor conforming to DIN Each 201.00
944 BMW-I.350 Supply of 32mm x ¾” PPR Female Threaded Adaptor conforming to DIN Each 212.00
945 BMW-I.351 Supply of 32mm x 1" PPR Female Threaded Adaptor conforming to DIN Each 327.00
946 BMW-I.352 Supply of 40mm x 1¼” PPR Female Threaded Adaptor conforming to DIN Each 484.00
947 BMW-I.353 Supply of 50mm x 1½” PPR Female Threaded Adaptor conforming to DIN Each 676.00
948 BMW-I.354 Supply of 63mm x 2" PPR Female Threaded Adaptor conforming to DIN Each 899.00
949 BMW-I.355 Supply of 75mm x 2½”PPR Female Threaded Adaptor conforming to DIN Each 1,733.00
950 BMW-I.356 Supply of 20mm x ½” PPR Male Threaded Adaptor conforming to DIN Each 174.00
951 BMW-I.357 Supply of 25mm x ½” PPR Male Threaded Adaptor conforming to DIN Each 180.00
952 BMW-I.358 Supply of 25mm x ¾” PPR Male Threaded Adaptor conforming to DIN Each 262.00
953 BMW-I.359 Supply of 32mm x ¾” PPR Male Threaded Adaptor conforming to DIN Each 274.00
954 BMW-I.360 Supply of 32mm x 1" PPR Male Threaded Adaptor conforming to DIN Each 509.00
955 BMW-I.361 Supply of 40mm x 1¼” PPR Male Threaded Adaptor conforming to DIN Each 597.00
956 BMW-I.362 Supply of 50mm x 1½” PPR Male Threaded Adaptor conforming to DIN Each 834.00
957 BMW-I.363 Supply of 63mm x 2" PPR Male Threaded Adaptor conforming to DIN Each 1,283.00
958 BMW-I.364 Supply of 75mm x 2½”PPR Male Threaded Adaptor conforming to DIN Each 2,052.00
959 BMW-I.365 Supply of 20mm x ½” PPR Female Threaded Elbow conforming to DIN Each 120.00
961 BMW-I.367 Supply of 25mm x ¾” PPR Female Threaded Elbow conforming to DIN Each 193.00
963 BMW-I.369 Supply of 32mm x ¾” PPR Female Threaded Elbow conforming to DIN Each 216.00
964 BMW-I.370 Supply of 32mm x 1" PPR Female Threaded Elbow conforming to DIN Each 362.00
965 BMW-I.371 Supply of 20mm x ½” PPR Male Threaded Elbow conforming to DIN Each 180.00
967 BMW-I.373 Supply of 25mm x ¾” PPR Male Threaded Elbow conforming to DIN Each 261.00
120
SS RATE
2014-15
969 BMW-I.375 Supply of 32mm x1" PPR Male Threaded Elbow conforming to DIN Each 541.00
970 BMW-I.376 Supply of 20mm x ½” PPR Female Threaded Tee conforming to DIN Each 116.00
972 BMW-I.378 Supply of 25mm x ¾” PPR Female Threaded Tee conforming to DIN Each 212.00
974 BMW-I.380 Supply of 32mm x ¾” PPR Female Threaded Tee conforming to DIN Each 251.00
975 BMW-I.381 Supply of 32mm x 1" PPR Female Threaded Tee conforming to DIN Each 352.00
976 BMW-I.382 Supply of 20mm x ½” PPR Male Threaded Teeconforming to DIN Each 181.00
977 BMW-I.383 Supply of 25mm x ½” PPR Male Threaded Tee conforming to DIN Each 193.00
978 BMW-I.384 Supply of 25mm x ¾” PPR Male Threaded Tee conforming to DIN Each 277.00
979 BMW-I.385 Supply of 32mm x ½” PPR Male Threaded Tee conforming to DIN Each 283.00
980 BMW-I.386 Supply of 32mm x ¾” PPR Male Threaded Tee conforming to DIN Each 299.00
981 BMW-I.387 Supply of 32mm x 1" PPR Male Threaded Tee conforming to DIN Each 552.00
982 BMW-I.388 Supply of 20mm x ½” PPR Female Threaded Union conforming to DIN Each 466.00
983 BMW-I.389 Supply of 25mm x ¾” PPR Female Threaded Union conforming to DIN Each 698.00
984 BMW-I.390 Supply of 32mm x 1” PPR Female Threaded Union conforming to DIN Each 932.00
985 BMW-I.391 Supply of 40mm x 1¼” PPR Female Threaded Union conforming to DIN Each 1,306.00
986 BMW-I.392 Supply of 50mm x 1½” PPR Female Threaded Union conforming to DIN Each 2,099.00
987 BMW-I.393 Supply of 63mm x 2” PPR Female Threaded Union conforming to DIN Each 3,334.00
988 BMW-I.394 Supply of 20mm x ½” PPR Male Threaded Union conforming to DIN Each 534.00
989 BMW-I.395 Supply of 25mm x ¾” PPR Male Threaded Union conforming to DIN Each 710.00
990 BMW-I.396 Supply of 32mm x 1” PPR Male Threaded Union conforming to DIN Each 932.00
991 BMW-I.397 Supply of 40mm x 1¼” PPR Male Threaded Union conforming to DIN Each 1,165.00
992 BMW-I.398 Supply of 50mm x 1½” PPR Male Threaded Union conforming to DIN Each 2,215.00
993 BMW-I.399 Supply of 63mm x 2” PPR Male Threaded Union conforming to DIN Each 3,732.00
994 BMW-I.400 Supply of 20mm PPR Union conforming to DIN Standards 8077/ 8092 Each 102.00
997 BMW-I.403 Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/ 8092 Each 186.00
121
SS RATE
2014-15
1003 BMW-I.409 Supply of 75mm PPR Ball Valve conforming to DIN Standards 8077/ 8092 Each 1,633.00
1004 BMW-I.410 Supply of 90mm PPR Ball Valve conforming to DIN Standards 8077/ 8092 Each 2,333.00
1005 BMW-I.411 Supply of 20mm PPR Clamp conforming to DIN Standards 8077/ 8092 Each 11.00
1009 BMW-I.415 Labour charges for laying, joining, welding, fixing and commissioning the 1 RM 29.00
PPR pipes including all specials such as couplers/ bends/ tees etc
including fixing necessary fittings like bends, plugs, couplers, junctions,
tees, etc with welding the joint as per standard practice - up to 40 mm
dia
1010 BMW-I.416 Labour charges for laying, joining, welding, fixing and commissioning the 1 RM 49.00
PPR pipes including all specials such as couplers/ bends/ tees etc
including fixing necessary fittings like bends, plugs, couplers, junctions,
tees, etc with welding the joint as per standard practice - above 40 mm
dia
NOTE
1 All the items to be used on work are of first quality & ISI and as approved by the Engineer In charge of the work.
2 Rates given above are:
a) Rate for finished item of work
b) Labour charges only
3 RATES
a) Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
b) Works Contract VAT for General/ Composition Scheme on finished items may be allowed as applicable.
4 LABOUR Labour charges are increased based on proposals and market rates
5 Coloured porcelain items: 50% extra may be allowed on basic cost of white porcelain items excluding fittings
6 SSR Rates for Sanitary & water supply items are purely for guidance for the officers for preparation of estimates
vide Para 113 of APPWD code. Authority who prepares the estimate is however responsible for proper rates as
envisaged in Para 45 of APPWD code.
LEGEND
"BMW" -X.XX "BMW" for Water Supply & Sanitary items
XXX-"A".XX "A" for Name of the Section
XXX-X."01" "01" for Serial Number of the Item
Sl. NAMES OF THE APPROVED BRAND/ MANUFACTURER/

SECTION NAMES OF THE ITEMS
No SUPPLIER
1 SECTION – C C.I. PIPES & FITTINGS - AS PER - IS B.I.C., NECO or equivalent
1729:1979
2 SECTION – D VITREOUS CHINAWARE - SANITARY Hindustan Sanitary ware/ Parryware/ Neycer/ CERA / Jaquar
APPLIANCES as per IS:2556 - 1974
3 SECTION – E TAPS & FAUCETS Seiko/ Senior/ Nice/ Senior/ Nice/ Cera or equivalent
4 SECTION – F G.I. PIPES & FITTINGS Pipes -Tata, Sail, Zenith: Fittings - HB : Valves - Zoloto
5 SECTION – G PVC PIPES & FITTINGS Sintex for PVC tanks, Pipes and Fittings -
Prince/Sudhakar/Kisan/Supreme or any ISI Brand, LLC Tanks -
Parry ware, Slim line, CERA
6 SECTION – H CENTRIFUGAL CAST IRON PIPES & B.I.C., NECO - ISI brand
FITTNGS AS PER IS: 3989 - 1984
7 SECTION – I MISCELLANEOUS Special Taps and CP Fittings - Jaquar / Jupiter Aqua Lines-JAL/
CERA or equivalent series
122
Electrical Items – Buildings SoR: 2014-15
ELECTRICAL ITEMS
123
PREAMBLE TO ELCTRICAL SOR 2014-2015
1. The area allowances in case of Corporation, Municipalities, Jail Compounds, Agency &
Tribal areas and Industrial areas have to be followed as per prevailing Common SOR.
2. The Electrical contractor is solely responsible for b oth q ua lity a nd qu antity . Prop o sin g
sp ecific mak e in th e estimate fro m the SOR is within th e scop e of concerned field
officers based on the necessity and availability of materials in such areas.
3. In ca se of 2way p oints i.e. stair ca se p o int etc wh ere two way switch contro l is
n ecessary , a n extra at 50 % excess over each point shall be allowed.
4. Where ever the light/fan point is provided at a height/length of 15 feet and above,
then an extra of 50% over the point rates shall be allowed.
5. Th e rates fo r co mmon civil items inclu ding labo ur r ates ha ve to be ad opted fro m
p reva iling SOR.
6. The rates for all types of electrical items proposed are inclusive of all taxes such as
Sales Tax, Excise duty etc.
7. Th e Go vern m en t in stru ctio n s fo r u sa g e o f E n ergy ef ficien t lu min a rie s h a ve to b e
in va ria b ly fo llo wed while proposing lu minaries in the estimates.
8. The rates for items su ch as Lifts, Refrigerators / A.C. plants / Water coolers, Solar
Power Systems and Video and Audio Systems etc., have to be invariably followed based on
the prevailing market rates, since the rates and sp ecifica tio n va ri es fro m ma n u fa ctu rer
to ma n u fa ctu rer co n sidera b ly . H en ce, ra tes fo r th ese items a r e n o t i n c o r p o r a t e d i n
t h e s c h e d u l e . H o w e v e r , r e l e v a n t d a t a w i t h o u t r a t e s i s p r o v i d e d i n t h e standard
schedule data for electrical works.
9. In case o f any addition to the proposed SOR, the approval ha s to be obtained fro m
the Buildin g SOR Committee o f Chief Engin eers through the R&B Electrical
wing.Temporary a p p r o v a l s w h i c h a r e u n d e r r e l e v a n t s p e c i f i c a t i o n s o f t h e
B I S / I S O / I S I c a n b e g i v e n b y t h e Superintending Engineer (R&B) Electrical.
10. The Superintending Engineer (R&B) Electrical will review the performance over the
quality of the ma k es p ro p o sed in th e SOR fro m t ime to ti me a n d in ca s e a n y in ferio r
q u a lity is o b served th e sa me shall be brought to the notice of the Chief Engineer
(R&B) Electrical to consider for deletion from the SOR.
11. The schedule of rates is only for guidance of officers for preparation of estimates as
per the Para 113 of APPWD code. Th e authority that sanctioned the estimate is
however responsib le fo r adopting the proper rates in the estimates as envisaged in
para 45 of APPWD code.
12. As per GO Ms No.51 Industries and commence (MSME) Dept Dt:01.06.2010,All the
indenting departments / Agents should invariably give preference to all local MSME
which are manufacturing quality products having ISO 9001 – 2000, DGS & D, BIS
certification without entertaining any other dealers / branded product manufacturers
who have no production base in the state.
124
RATE FOR
SL.
ITEM CODE DESCRIPTION OF ITEM Unit SOR
NO.
2014-15
1 2 3 4 5
SECTION - 1
1.1 M.S. CONDUIT PIPES
1 ELEC-1.1.1 Supply of ISI, 20mm dia, 16 guage thickness MS conduit pipe 1 Mtr 71.30
of makes NAI / Bharath / GB.
5 ELEC-1.1.5 Supply of ISI, 50mm dia,16 guage thickness MS conduit pipe 1 Mtr 178.20
6 ELEC-1.1.6 Supply of 19 / 20 mm MS Junction box normal range big size 1 No 24.00
long neck.
7 ELEC-1.1.7 Supply of 25 mm MS Junction box normal range big size long 1 No 24.00
neck.
neck.
9 ELEC-1.1.9 Supply of 40 / 38 mm MS Junction box normal range big size 1 No 74.00
long neck.
neck.
11 ELEC-1.1.11 Supply of 25/20mm.MS Junction deep box. 1 No 39.00
12 ELEC-1.1.12 Supply of 32mm.MS Junction deep box. 1 No 89.00
13 ELEC-1.1.13 Supply of 40mm.MS Junction deep box. 1 No 92.00
14 ELEC-1.1.14 Supply of 19/20mm MS Inspection Bends. 1 No 22.00
15 ELEC-1.1.15 Supply of 25mm MS Inspection Bends. 1 No 22.00
17 ELEC-1.1.17 Supply of 40/38mm MS Inspection Bends. 1 No 67.00
19 ELEC-1.1.19 Supply of 19/20mm MS Inspection Tee. 1 No 23.00
20 ELEC-1.1.20 Supply of 25mm MS Inspection Tee. 1 No 24.00
22 ELEC-1.1.22 Supply of 40/38mm MS Inspection Tee. 1 No 74.00
24 ELEC-1.1.24 Supply of 19/20mm MS Inspection Elbow. 1 No 21.00
25 ELEC-1.1.25 Supply of 25mm MS Inspection Elbow. 1 No 21.00
27 ELEC-1.1.27 Supply of 40/38mm MS Inspection Elbow. 1 No 65.00
29 ELEC-1.1.29 Supply of MS Inspection 10 Guage G.I. checknut size 100 Nos 206.00
19/20mm.
30 ELEC-1.1.30 Supply of MS Inspection 10 Guage G.I. checknut size 25mm. 100 Nos 256.00
125
RATE FOR
SL.
NO.
2014-15
32 ELEC-1.1.32 Supply of MS Inspection 10 Guage G.I. checknut size 100 Nos 642.00
40/38mm.
34 ELEC-1.1.34 Supply of 19/20mm Saddles with Base. 100 Nos 211.00
35 ELEC-1.1.35 Supply of 25mm Saddles with Base. 100 Nos 220.00
37 ELEC-1.1.37 Supply of 40/38mm Saddles with Base. 100 Nos 386.00
39 ELEC-1.1.39 Supply of 19/20mm 20 guage Saddles. 100 Nos 113.00
40 ELEC-1.1.40 Supply of 25mm 20 guage Saddles. 100 Nos 149.00
42 ELEC-1.1.42 Supply of 40/38mm 20 guage Saddles. 100 Nos 308.00
44 ELEC-1.1.44 Supply of 19/20mm 16 Guage socket coupler. 12 Nos 57.00
45 ELEC-1.1.45 Supply of 25mm 16 Guage socket coupler. 12 Nos 72.00
50 ELEC-1.1.50 Supply of 19mm Ball Socket. 12 Nos 212.00
51 ELEC-1.1.51 Supply of 25mm Ball Socket. 12 Nos 207.00
1.2 PVC CONDUIT PIPES
52 ELEC-1.2.1 Supply of ISI 20mm outer dia medium (1.55mm thickness) 1 Mtr 19.10
grade with IS:9537 part 3 regid PVC pipe of makes Sudhakar /
Modi / Atul.
53 ELEC-1.2.2 Supply of ISI 20mm outer dia heavy (2.10mm thickness) grade 1 Mtr 24.20
with IS:9537 part 3 regid PVC pipe of makes Sudhakar / Modi /
Atul.
Modi / Atul.
55 ELEC-1.2.4 Supply of ISI 25mm outer dia heavy (2.20mm thickness) grade 1 Mtr 31.80
with IS:9537 part 3 regid PVC pipe of makes Sudhakar / Modi /
Atul.
Modi / Atul.
Modi / Atul.
Modi / Atul.
59 ELEC-1.2.8 Supply of Non - ISI 19mm 1.50mm thick regid PVC pipe of 1 Mtr 13.90
makes Million Plast / Sudhakar / Durga / Nandi / Sunlight /
Besto Plast.
126
RATE FOR
SL.
NO.
2014-15
Besto Plast.
Besto Plast.
Besto Plast.
63 ELEC-1.2.12 Supply of Non - ISI 32mm dia 2.0mm thickness PVC pipe of 1 Mtr 32.30
Besto Plast.
Besto Plast.
Besto Plast.
66 ELEC-1.2.15 Supply of ISI 19/20mm width and 12.5mm height Casing and 1 Mtr 25.40
Caping of Modi make.
67 ELEC-1.2.16 Supply of ISI 25mm width and 12.5mm height Casing and 1 Mtr 31.80
68 ELEC-1.2.17 Supply of ISI 32mm width and 12.5mm height Casing and 1 Mtr 36.90
69 ELEC-1.2.18 Supply of ISI 38/40mm width and 12.5mm height Casing and 1 Mtr 63.50
70 ELEC-1.2.19 Supply of Non - ISI 19/20mm width and 12.5mm height Casing 1 Mtr 17.30
and Caping of Diamond / Durga make.
71 ELEC-1.2.20 Supply of Non - ISI 25mm width and 12.5mm height Casing 1 Mtr 18.50
72 ELEC-1.2.21 Supply of Non - ISI 32mm width and 12.5mm height Casing 1 Mtr 24.30
73 ELEC-1.2.22 Supply of Non - ISI 38/40mm width and 12.5mm height Casing 1 Mtr 35.80
74 ELEC-1.2.23 Supply of 19/20mm PVC Flexible Pipe. 1 Mtr 3.70
75 ELEC-1.2.24 Supply of 25mm PVC Flexible Pipe. 1 Mtr 4.90
77 ELEC-1.2.26 Supply of 40/38mm PVC Flexible Pipe. 1 Mtr 12.20
79 ELEC-1.2.28 Supply of 19/20mm PVC Flexible Couplings. 1 No 11.00
80 ELEC-1.2.29 Supply of 25mm PVC Flexible Couplings. 1 No 14.00
82 ELEC-1.2.31 Supply of 40/38mm PVC Flexible Couplings. 1 No 30.00
84 ELEC-1.2.33 Supply of 19/20mm PVC Junction Boxes Normal. 1 No 17.00
85 ELEC-1.2.34 Supply of 25mm PVC Junction Boxes Normal. 1 No 19.00
127
RATE FOR
SL.
NO.
2014-15
89 ELEC-1.2.38 Supply of PVC Junction Boxes Deep size 19/20mm. 1 No 22.00
90 ELEC-1.2.39 Supply of PVC Junction Boxes Deep size 25mm. 1 No 25.00
92 ELEC-1.2.41 Supply of PVC Junction Boxes Deep size 40/38mm. 1 No 43.00
94 ELEC-1.2.43 Supply of 19/20mm dia 1.5mm thick PVC Bends of Sudhakar 1 No 4.00
make.
95 ELEC-1.2.44 Supply of 25mm dia 1.5mm thick PVC Bends of Sudhakar 1 No 6.00
make.
make.
make.
make.
99 ELEC-1.2.48 Dummy Cover to PVC junction boxes 1 No 4.00
1.3 HOT DIP GALVANIZED METAL BOXES (MODULAR)
100 ELEC-1.3.1 Supply of 1 or 2 Module box 1 No 57.00
101 ELEC-1.3.2 Supply of 3 Module box 1 No 80.00
104 ELEC-1.3.5 Supply of 8 or 9 Module box Horizontal/Vertical. 1 No 170.00
METALLIC BOXES (MS)
106 ELEC-1.3.7 Supply of 4" x 4" Metal Box 1 No 53.00
1.4 T.W. BOARDS
112 ELEC-1.4.1 Supply of T.W.Deep Box of Size 4" x 4" 1 No 10.00
119 ELEC-1.4.8 Supply of Decolam Board of Size 4" x 4" 1 No 14.00
128
RATE FOR
SL.
NO.
2014-15
126 ELEC-1.4.15 Supply of Peeta Board of Size 9" x 14" 1 No 53.00
131 ELEC-1.4.20 Supply of No.8 Screws of 12mm. 100 Nos 59.00
134 ELEC-1.4.23 Supply of No.8 Screws of 35/38mm. 100 Nos 96.00
136 ELEC-1.4.25 Supply of No.8 Screws of 63/75mm. 100 Nos 131.00
1.5 COPPER FLEXIBLE CABLES
(AS PER IS:694)
137 ELEC-1.5.1 Supply of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 100 Mtrs 1051.00
1100V grade as perIS:694/1990 specification for Copper cable
of makes Finolex / RR kabel
142 ELEC-1.5.6 Supply of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR insulated 100 Mtrs 9030.00
flexible Copper cable of makes Finolex / RR kabel
flexible Copper cable of makes Finolex / RR kabel
of makes KEI / Polycab / Havells / GM / Million / HPL / Gold
Medal / Power Flex / RPG / Anchor / Sun Cab / Fortune Art /
Great white.
Great white.
129
RATE FOR
SL.
NO.
2014-15
Great white.
Great white.
Great white.
flexible Copper cable of makes KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Sun
Cab / Fortune Art.
flexible Copper cable of makes KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Sun
Cab / Fortune Art.
151 ELEC-1.5.15 Supply of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC insulated 100 Mtrs 797.00
of makes Standard / Gloster / Nandicab / V-Guard / Vimal /
Nakoda / Star / Milltec / Fine Cab / Payal / Bentec / Gemscab .
130
RATE FOR
SL.
NO.
2014-15
SHEATHED FLEXIBLE CABLES
158 ELEC-1.5.22 Supply of PVC insulated 2 core 1.5 Sqmm sheathed flexible 100 Mtrs 4190.00
copper cable for voltage up to 1100V as per IS 694/1990 of
makes Finolex / RR Kable.
1.6 SERVICE MAINS AND FLAT CABLE OF ISI FOR SUBMERSIBLE
MOTORS.
167 ELEC-1.6.1 Supply of 2.5 Sqmm WPSC (Weather Proof Single Core) ISI 100 Mtrs 737.00
Alluminium Wire of makes Finolex / GM / Million / V-Guard /
Payal / Nakoda / Gold Medal / HPL / RPG / Nandicab.
168 ELEC-1.6.2 Supply of 6 Sqmm WPSC (Weather Proof Single Core) ISI 100 Mtrs 1497.00
131
RATE FOR
SL.
NO.
2014-15
171 ELEC-1.6.5 Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI 100 Mtrs 3017.00
174 ELEC-1.6.8 Supply of 23 / 0060 twin core twisted / flat heavy Copper wire 100 Mtrs 1040.00
of makes Finolex / GM / Million / V-Guard / Payal / Nakoda /
Gold Medal / HPL / RPG / Nandicab.
175 ELEC-1.6.9 Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for 100 Mtrs 5717.00
Submersible Motors of makes Finolex / GM / Million / V-
Guard / Payal / Nakoda / Gold Medal / HPL / RPG.
176 ELEC-1.6.10 Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS 100 Mtrs 8778.00
694:1990 for Submersible Motors of makes Finolex / GM /
Million / V-Guard / Payal / Nakoda / Gold Medal / HPL / RPG.
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES
180 ELEC-1.7.1 Supply of 6A 1 Way flush type Swich of makes GM G Home / 1 No 18.00
Gold Medal Olive / Million Zoom / Anchor Penta Cherry /
Great white Omega
181 ELEC-1.7.2 Supply of 6A 2 Way flush type Swich of makes GM G Home / 1 No 21.00
Great white Omega
182 ELEC-1.7.3 Supply of 6A 2 pin flush type Socket of makes GM G Home / 1 No 20.00
Great white Omega
183 ELEC-1.7.4 Supply of 6A 3/2 pin flush type Socket with shutter of makes 1 No 27.00
GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta
Cherry / Great white Omega
184 ELEC-1.7.5 Supply of 6A flush type Neon Indicator of makes GM G Home / 1 No 20.00
Great white Omega
185 ELEC-1.7.6 Supply of 6A Triangle Plug Top of makes GM G Home / Gold 1 No 35.00
Medal Olive / Million Zoom / Anchor Penta Cherry / Great
white Omega
132
RATE FOR
SL.
NO.
2014-15
186 ELEC-1.7.7 Supply of 6A 1 Way flush type Bed Swich / Bell Push of makes 1 No 21.00
GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta
187 ELEC-1.7.8 Supply of 16A flush type Swich of makes GM G Home / Gold 1 No 65.00
white Omega
188 ELEC-1.7.9 Supply of 16A flush type Socket with shutter of makes GM G 1 No 65.00
Home / Gold Medal Olive / Million Zoom / Anchor Penta
189 ELEC-1.7.10 Supply of 16A flush type Switch Socket combined (2 in one) of 1 No 102.00
makes GM G Home / Gold Medal Olive / Million Zoom /
Anchor Penta Cherry / Great white Omega
190 ELEC-1.7.11 Supply of 16A Triangle Plug Top of makes GM G Home / Gold 1 No 50.00
white Omega
191 ELEC-1.7.12 Supply of stepped type Electronic Regulator of makes GM G 1 No 220.00
192 ELEC-1.7.13 Supply of 3 Plate Jumbo Ceiling Rose of makes Anchor / Gold 1 No 21.00
Medal Olive / Million Zoom.
193 ELEC-1.7.14 Supply of BH / SBH of makes Anchor / Gold Medal Olive / 1 No 20.00
Million Zoom.
194 ELEC-1.7.15 Supply of Pendent Holder / Adopter of makes Anchor / Gold 1 No 17.00
Medal Olive / Million Zoom.
195 ELEC-1.7.16 Supply of Telephone Jack with Connector of makes GM G 1 No 48.00
196 ELEC-1.7.17 Supply of TV Antenna Outlet of makes GM G Home / Gold 1 No 26.00
white Omega
197 ELEC-1.7.18 Supply of 15A/10A Flush type Fuse of makes GM / Million / 1 No 32.00
Gold Medal / Maru Mantero / Anchor Penta Cherry / Great
white.
198 ELEC-1.7.19 Supply of 32A DP Flush type of makes GM / Million / Gold 1 No 106.00
Medal / Maru Mantero / Anchor Penta Cherry / Great white.
199 ELEC-1.7.20 Supply of Calling Bell of makes GM / Million / Gold Medal / 1 No 50.00
Maru / Anchor / Great white.
200 ELEC-1.7.21 Supply of Buzzer of makes GM / Million / Gold Medal / Maru / 1 No 45.00
Anchor / Great white.
201 ELEC-1.7.22 Supply of Ding Dong Bell of makes GM / Million / Gold Medal 1 No 102.00
/ Maru / Anchor / Great white.
202 ELEC-1.7.23 Supply of Electronic Musical Bell of makes GM / Million / Gold 1 No 240.00
Medal / Maru / Anchor / Great white.
203 ELEC-1.7.24 Supply of Remote Bell of makes GM / Million / Gold Medal / 1 No 450.00
204 ELEC-1.7.25 Supply of MC Holder of makes GM / Million / Gold Medal / 1 No 21.00
133
RATE FOR
SL.
NO.
2014-15
205 ELEC-1.7.26 Supply of Spike Guard with 1 No Switch and 4 Nos Sockets of 1 No 310.00
makes GM / Million / Gold Medal / Maru / Anchor / Great
white.
206 ELEC-1.7.27 Supply of Spike Guard with 4 No Switches and 4 Nos Sockets 1 No 410.00
of makes GM / Million / Gold Medal / Maru / Anchor / Great
white.
207 ELEC-1.7.28 Supply of 6A 1 Way flush type Swich of makes Vimal opel / 1 No 15.00
Maru Mantero / Starex Smile / CPL.
208 ELEC-1.7.29 Supply of 6A 2 Way flush type Swich of makes Vimal opel / 1 No 19.00
209 ELEC-1.7.30 Supply of 6A 2 pin flush type Socket of makes Vimal opel / 1 No 15.00
210 ELEC-1.7.31 Supply of 6A 3/2 pin flush type Socket with shutter of makes 1 No 20.00
Vimal opel / Maru Mantero / Starex Smile / CPL.
211 ELEC-1.7.32 Supply of 6A flush type Neon Indicator of makes Vimal opel / 1 No 18.00
212 ELEC-1.7.33 Supply of 6A Triangle Plug Top of makes Vimal opel / Maru 1 No 28.00
Mantero / Starex Smile / CPL.
213 ELEC-1.7.34 Supply of 6A 1 Way flush type Bed Swich / Bell Push of makes 1 No 18.00
Vimal opel / Maru Mantero / Starex Smile / CPL.
214 ELEC-1.7.35 Supply of 16A flush type Swich of makes Vimal opel / Maru 1 No 55.00
215 ELEC-1.7.36 Supply of 16A flush type Socket with shutter of makes Vimal 1 No 55.00
opel / Maru Mantero / Starex Smile / CPL.
216 ELEC-1.7.37 Supply of 16A flush type Switch Socket combined (2 in one) of 1 No 85.00
makes Vimal opel / Maru Mantero / Starex Smile / CPL.
217 ELEC-1.7.38 Supply of 16A Triangle Plug Top of makes Vimal opel / Maru 1 No 44.00
218 ELEC-1.7.39 Supply of stepped type Electronic Regulator of makes Vimal 1 No 180.00
opel / Maru Mantero / Starex Smile / CPL.
219 ELEC-1.7.40 Supply of 3 Plate Jumbo Ceiling Rose of makes Vimal opel / 1 No 16.00
220 ELEC-1.7.41 Supply of 32A DP Flush type of makes GM / Gold Medal / 1 No 85.00
Anchor / Great White/ Milltec / Vimal / Maru / Star.
1.8 MINI MODULAR SWITCHES AND ACCESSORIES
221 ELEC-1.8.1 Supply of 6A 1 Way Mini Modular Switch with Cover Frame of 1 No 23.00
makes GM / Anchor / Million / Vimal / Gold Medal / Maru /
CPL / Great White.
222 ELEC-1.8.2 Supply of 6A 2 Way Mini Modular Switch with Cover Frame of 1 No 26.00
CPL / Great White.
223 ELEC-1.8.3 Supply of 6A 2 Pin Mini Modular Socket with Cover Frame of 1 No 24.00
CPL / Great White.
224 ELEC-1.8.4 Supply of 6A 3/2 Pin Mini Modular Socket with Cover Frame 1 No 35.00
of makes GM / Anchor / Million / Vimal / Gold Medal / Maru /
CPL / Great White.
134
RATE FOR
SL.
NO.
2014-15
225 ELEC-1.8.5 Supply of 6A Mini Modular Neon Indicator with Cover Frame 1 No 28.00
CPL / Great White.
226 ELEC-1.8.6 Supply of 6A Mini Modular Bed Switch / Bell Push with Cover 1 No 26.00
Frame of makes GM / Anchor / Million / Vimal / Gold Medal /
Maru / CPL / Great White.
227 ELEC-1.8.7 Supply of 6A 1 Way Mini Modular Switch with Neon Indicator 1 No 28.00
with Cover Frame of makes GM / Anchor / Million / Vimal /
Gold Medal / Maru / CPL / Great White.
228 ELEC-1.8.8 Supply of 6A Mini Modular Bell Push with Neon Indicator 1 No 39.00
229 ELEC-1.8.9 Supply of 16A Mini Modular Switch with Cover Frame of 1 No 80.00
CPL / Great White.
230 ELEC-1.8.10 Supply of 16A (2 in one) Mini Modular Switch & Socket 1 No 110.00
combined with Cover Frame of makes GM / Anchor / Million /
Vimal / Gold Medal / Maru / CPL / Great White.
231 ELEC-1.8.11 Supply of 16A Triangle Top with Cover Frame of makesGM / 1 No 49.00
Anchor / Million / Vimal / Gold Medal / Maru / CPL / Great
White.
232 ELEC-1.8.12 Supply of Mini Modular Stepped type Electronic Regulator 1 No 240.00
233 ELEC-1.8.13 Supply of Mini Modular Telephone Jack with Connector with 1 No 54.00
Cover Frame of makes GM / Anchor / Million / Vimal / Gold
Medal / Maru / CPL / Great White.
234 ELEC-1.8.14 Supply of Mini Modular TV Antenna Outlet with Cover Frame 1 No 35.00
CPL / Great White.
235 ELEC-1.8.15 Supply of 16A/10A Mini Modular Flush Fuse with Cover 1 No 40.00
Frame of makes GM / Anchor / Million / Vimal / Gold Medal /
Maru / CPL / Great White.
1.9 MODULAR SWITCHES AND ACCESSORIES
236 ELEC-1.9.1 Supply of 6A / 10A 1 Way 1 Module Modular Switch of GM 1 No 92.00
Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
238 ELEC-1.9.3 Supply of 6A / 10A 2 Pin 2 Module Modular Socket of GM 1 No 93.00
239 ELEC-1.9.4 Supply of 6A / 10A 3/2 Pin 2 Module Modular Socket with 1 No 141.00
shutter of GM Four-Five / Legrand Arteor / Schneider Zen celo
/ MK Blenge.
240 ELEC-1.9.5 Supply of 6A / 10A 1 Module Modular Switch with Neon 1 No 117.00
Indicator of GM Four-Five / Legrand Arteor / Schneider Zen
celo / MK Blenge.
135
RATE FOR
SL.
NO.
2014-15
241 ELEC-1.9.6 Supply of 6A / 10A Modular Bell Push with Neon Indicator of 1 No 137.00
GM Four-Five / Legrand Arteor / Schneider Zen celo / MK
Blenge.
242 ELEC-1.9.7 Supply of 16A / 10A Modular Flush Fuse with Neon Indicator 1 No 126.00
of GM Four-Five / Legrand Arteor / Schneider Zen celo / MK
Blenge.
245 ELEC-1.9.10 Supply of 20A 1 Way 1 Module Modular Switch with Indicator 1 No 138.00
Blenge.
246 ELEC-1.9.11 Supply of 20A Modular Socket with shutter of GM Four-Five / 1 No 188.00
Legrand Arteor / Schneider Zen celo / MK Blenge.
247 ELEC-1.9.12 Supply of 16A/6A 1 way Combi Socket Modular Socket with 1 No 196.00
shutter of GM Four-Five / Legrand Arteor / Schneider Zen celo
/ MK Blenge.
248 ELEC-1.9.13 Supply of 16A Triangle Top of GM Four-Five / Legrand Arteor / 1 No 158.00
Schneider Zen celo / MK Blenge.
249 ELEC-1.9.14 Supply of 1 Module Modular type Electronic step type Fan 1 No 473.00
Regulator of GM Four-Five / Legrand Arteor / Schneider Zen
celo / MK Blenge.
250 ELEC-1.9.15 Supply of Modular socket type Telephone jack with Connector 1 No 100.00
Blenge.
251 ELEC-1.9.16 Supply of Modular co-Axial socket type TV Antenna outlet of 1 No 98.00
GM Four-Five / Legrand Arteor / Schneider Zen celo / MK
Blenge.
252 ELEC-1.9.17 Supply of 6A / 10A 1 Way 1 Module Modular Switch of 1 No 63.00
Legrand Myrius / Cabtree Thames Platinum / Million Logus /
Gold Medal Curve / Anchor Roma viola / CPL.
254 ELEC-1.9.19 Supply of 6A / 10A 2 Pin 1 Module Modular Socket with 1 No 64.00
shutter of Legrand Myrius / Cabtree Thames Platinum /
Million Logus / Gold Medal Curve / Anchor Roma viola / CPL.
255 ELEC-1.9.20 Supply of 6A / 10A 3/2 Pin 2 Module Modular Socket with 1 No 93.00
shutter of Legrand Myrius / Cabtree Thames Platinum /
256 ELEC-1.9.21 Supply of 6A / 10A 1 Module Modular Switch with Neon 1 No 75.00
Indicator of Legrand Myrius / Cabtree Thames Platinum /
257 ELEC-1.9.22 Supply of 6A / 10A 1 Module Modular Bell Push with Neon 1 No 90.00
136
RATE FOR
SL.
NO.
2014-15
258 ELEC-1.9.23 Supply of 16A / 10A 1 Module Modular Flush Fuse with Neon 1 No 83.00
261 ELEC-1.9.26 Supply of 20A 1 Way 1 Module Modular Switch with Indicator 1 No 91.00
of Legrand Myrius / Cabtree Thames Platinum / Million Logus
/ Gold Medal Curve / Anchor Roma viola / CPL.
262 ELEC-1.9.27 Supply of 20A 2 Module Modular Socket with shutter of 1 No 133.00
263 ELEC-1.9.28 Supply of 16A/6A 1 way 2 Module Combi Socket Modular 1 No 135.00
Socket with shutter of Legrand Myrius / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve / Anchor Roma
viola / CPL.
264 ELEC-1.9.29 Supply of 16A Triangle Top of Legrand Myrius / Cabtree 1 No 65.00
Thames Platinum / Million Logus / Gold Medal Curve / Anchor
Roma viola / CPL.
265 ELEC-1.9.30 Supply of 1 Module Modular type Electronic step type Fan 1 No 375.00
Regulator of Legrand Myrius / Cabtree Thames Platinum /
266 ELEC-1.9.31 Supply of Modular socket type Telephone jack with Connector 1 No 65.00
of Legrand Myrius / Cabtree Thames Platinum / Million Logus
/ Gold Medal Curve / Anchor Roma viola / CPL.
267 ELEC-1.9.32 Supply of Modular co-Axial socket type TV Antenna outlet of 1 No 64.00
268 ELEC-1.9.33 Supply of 1 or 2 Modular Cover Frame of GM Four-Five / 1 No 65.00
269 ELEC-1.9.34 Supply of 3 Modular Cover Frame of GM Four-Five / Legrand 1 No 77.00
Arteor / Schneider Zen celo / MK Blenge.
272 ELEC-1.9.37 Supply of 8 Modular Horizontal / Vertical Cover Frame of GM 1 No 172.00
273 ELEC-1.9.38 Supply of 12 Modular Vertical Cover Frame of GM Four-Five / 1 No 210.00
274 ELEC-1.9.39 Supply of 1 or 2 Modular Cover Frame of Legrand Myrius / 1 No 56.00
Cabtree Thames Platinum / Million Logus / Gold Medal Curve
/ Anchor Roma viola / CPL.
137
RATE FOR
SL.
NO.
2014-15
275 ELEC-1.9.40 Supply of 3 Modular Cover Frame of Legrand Myrius / Cabtree 1 No 69.00
Roma viola / CPL.
Roma viola / CPL.
Roma viola / CPL.
278 ELEC-1.9.43 Supply of 8 Modular Horizontal / Vertical Cover Frame of 1 No 137.00
279 ELEC-1.9.44 Supply of 12 Modular Vertical Cover Frame of Legrand Myrius 1 No 167.00
/ Cabtree Thames Platinum / Million Logus / Gold Medal
Curve / Anchor Roma viola / CPL.
SECTION - 2
2.1 PANEL MOUNTING SWITCH DISCONNECTOR FUSE UNITS
( SDFU ) AS PER IS: 13947
280 ELEC-2.1.1 Supply of 32A TPN Switch Disconnector Fuse Unit Cubical type 1 No 1351.00
without fuses of makes L&T / G E / C&S / ABB / SIEMENS
without fuses of makes L&T / G E / C&S / ABB / SIEMENS
282 ELEC-2.1.3 Supply of 125A TPN Switch Disconnector Fuse Unit Cubical 1 No 5578.00
type without fuses of makes L&T / G E / C&S / ABB / SIEMENS
without fuses of makes Standard / Havells / HPL.
without fuses of makes Standard / Havells / HPL.
type without fuses of makes Standard / Havells / HPL.
138
RATE FOR
SL.
NO.
2014-15
2.2 ON LOAD CHANGEOVER SWITCHES
(OPEN EXECUTION)
AS PER IS:13947
294 ELEC-2.2.1 Supply of 63A 4 Pole Change Over Switch on Load with open 1 No 4135.00
Execution of makes HPL Socomec / L & T
Execution of makes ABB / GE / Siemens / Standard / Havells.
2.3 OFF LOAD CHANGE OVER SWITCHES IN SS ENCLOUSURE AS
PER IS:13947
307 ELEC-2.3.1 Supply of 32A 240V DP Off load Changeover Switch in sheet 1 No 1318.00
steel enclosure of makes HPL / Havells / Standard.
308 ELEC-2.3.2 Supply of 63A 415V FP Off load Changeover Switch in sheet 1 No 4594.00
310 ELEC-2.3.4 Supply of 32A 240V DP Off load Changeover Switch in sheet 1 No 760.00
steel enclosure of makes Million / Bentec / Gold Medal / Star.
2.4 REWIRABLE / DOUBLE BREAK SWITCHES IN SS ENCLOSURE AS
PER IS:13947
139
RATE FOR
SL.
NO.
2014-15
313 ELEC-2.4.1 Supply of 32A 240V SPN Rewirable Fuse Switch in SS enclosure 1 No 936.00
of makes HPL / Havells / Standard.
314 ELEC-2.4.2 Supply of 32A 415V TPN Rewirable Fuse Switch in SS enclosure 1 No 1446.00
316 ELEC-2.4.4 Supply of 100A 415V TPN Rewirable Fuse Switch in SS 1 No 6148.00
enclosure of makes HPL / Havells / Standard.
317 ELEC-2.4.5 Supply of 100A 415V TPN Double Break Switch in SS enclosure 1 No 6190.00
without fuses of makes HPL / Havells / Standard.
without fuses of makes HPL / Havells / Standard.
319 ELEC-2.4.7 Supply of 32A 240V SPN Rewirable Fuse Switch in SS enclosure 1 No 620.00
of makes GM / Million / Sputnik / Sigma / Gold Medal /
Bentec / Star.
Bentec / Star.
Bentec / Star.
322 ELEC-2.4.10 Supply of 100A 415V TPN Rewirable Fuse Switch in SS 1 No 4579.00
enclosure of makes GM / Million / Sputnik / Sigma / Gold
Medal / Bentec / Star.
without fuse of makes GM / Million / Sputnik / Sigma / Gold
without fuse of makes GM / Million / Sputnik / Sigma / Gold
2.5 HRC FUSE LINKS (BOLTED TYPE)
325 ELEC-2.5.1 Supply of up to 32A HRC Fuse Links of makes L & T / G E / C & 1 No 50.00
S / Standard / HPL / Havells / Siemens.
326 ELEC-2.5.2 Supply of 32A to 63A HRC Fuse Links of makes L & T / G E / C 1 No 77.00
& S / Standard / HPL / Havells / Siemens.
327 ELEC-2.5.3 Supply of 125A to 200A HRC Fuse Links of makes L & T / G E / 1 No 248.00
C & S / Standard / HPL / Havells / Siemens.
328 ELEC-2.5.4 Supply of 250A to 350A HRC Fuse Links of makes L & T / G E / 1 No 363.00
C & S / Standard / HPL / Havells / Siemens.
329 ELEC-2.5.5 Supply of 400A HRC Fuse Links of makes L & T / G E / C & S / 1 No 704.00
Standard / HPL / Havells / Siemens.
330 ELEC-2.5.6 Supply of 630A HRC Fuse Links of makes L & T / G E / C & S / 1 No 1425.00
Standard / HPL / Havells / Siemens.
2.6 PORCELAIN REWIRABLE FUSE UNITS.
331 ELEC-2.6.1 Supply of 32A 240V Porcelain Rewirable Fuse Units of makes 1 No 99.00
GM / Sputnik / Million / Gold Medal / Vimal / Star / Bentec.
140
RATE FOR
SL.
NO.
2014-15
335 ELEC-2.6.5 Supply of 200A 415V Porcelain Rewirable Fuse Units with 1 No 891.00
extension strip of makes GM / Sputnik / Million / Gold Medal
/ Vimal / Star / Bentec.
336 ELEC-2.6.6 Supply of 300A 415V Porcelain Rewirable Fuse Units with 1 No 1182.00
extension strip of makes GM / Sputnik / Million / Gold Medal
/ Vimal / Star / Bentec.
2.7 VOLTAGE SURGE PROTECTORS
337 ELEC-2.7.1 Supply of 2 Pole 2 Module 40 KA 1.4 KV Voltage Surge 1 No 8000.00
Protector of make Legrand / Siemens / Hager / G E.
Protector of makeLegrand / Siemens / Hager / G E.
2.8 PANEL MOUNTING MCCBs/ ACBs (Thermal Magnetic
Release)
341 ELEC-2.8.1 Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to 1 No 6060.00
IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal
magnetic release Panel Mounted of makes L&T / Schneider /
Siemens.
342 ELEC-2.8.2 Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 1 No 7194.00
60947-2 having Breaking Capacity 25 KA with thermal
Siemens.
60947-2 having Breaking Capacity 36/35 KA with thermal
Siemens.
Siemens.
345 ELEC-2.8.5 Supply of 63A / 60A 4 Pole MCCB, Adjustable, Confirms to 1 No 6813.00
IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal
Siemens.
Siemens.
141
RATE FOR
SL.
NO.
2014-15
magnetic release Panel Mounted of makes L&T (DN2-250N) /
Schneider / Siemens / Hager
Siemens.
349 ELEC-2.8.9 Supply of 63A / 60A 3 Pole MCCB / Confirms to IS/IEC 60947-2 1 No 4229.00
having Breaking Capacity 25 KA with thermal magnetic release
Panel Mounted of makes Legrand / GE / ABB / Havells / HPL /
Standard.
350 ELEC-2.8.10 Supply of 125A 3 Pole MCCB / Confirms to IS/IEC 60947-2 1 No 4807.00
Standard.
having Breaking Capacity 36/35 KA with thermal magnetic
release Panel Mounted of makes Legrand / GE / ABB / Havells
/ HPL / Standard.
352 ELEC-2.8.12 Supply of 63A / 60A 4 Pole MCCB / Confirms to IS/IEC 60947-2 1 No 5668.00
Standard.
Standard.
Standard.
Standard.
PANEL MOUNTING ACBs (Microprocessor Based)
356 ELEC-2.8.16 Supply of 630A 3 Pole, 50kA Air Circuit Breaker electrically 1 No 104444.00
fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947
with Micro processer based having over load, shot circuit and
earth fault Protection of Siemens / L&T / Schneider make.
142
RATE FOR
SL.
NO.
2014-15
drawout Confirms to IS 13947-2, IEC 60947-2 and BS-EN 60947
earth fault protection of makes Siemens / L&T / Schneider
make.
make.
make.
make.
earth fault Protection of ABB / Legrand / HPL / GE make.
earth fault protection of makes ABB / Legrand / HPL / GE
143
RATE FOR
SL.
NO.
2014-15
make.
earth fault protection of makes ABB / Legrand / HPL / GE
make.
370 ELEC-2.8.30 Supply, instalation, testing and commisioning of 800 Amp, 1 Mtr 13328.00
50KA breaking capacity (100% Neutral busbar) air insulated
compact Raising mains system made of CRCA sheet steel
encloser of thickness not less than 1.5 mm having degree of
protection of IP 55 as per 2127. wall strapes, fully PVC
insulated four strip ALUMINIUM busbar in convinent sections
including , end feed unit, end cover units suitable for 415
volts 3 phase, 4 wire, 50 Hz A.C. System,etc., Makes: Legrand
/ L&T / Seimens / Schiender / GE
371 ELEC-2.8.31 Supply and Fixing of Spring suspension hanger for rising Main 1 No 5385.00
for 400A / 800A Raising Mains. Makes: Legrand / L&T /
Seimens / Schiender / GE
372 ELEC-2.8.32 Supply and Fixing of Suspension brackets for rising main for 1 No 4665.00
400A / 800A Raising Mains Makes: Legrand / L&T / Seimens /
Schiender / GE
373 ELEC-2.8.33 Supply and Fixing of 800 Amps Horizontal / Vertical bends 1 No 34800.00
Makes: Legrand / L&T / Seimens / Schiender / GE
374 ELEC-2.8.34 Supply and Fixing of Adopter box for 400A / 800A Raising 1 No 15000.00
Mains Makes: Legrand / L&T / Seimens / Schiender / GE
375 ELEC-2.8.35 Supply and Fixing of 800 Amps Copper Flexibles for three 1 No 46550.00
phases and neutral Makes: Legrand / L&T / Seimens /
Schiender / GE
376 ELEC-2.8.36 Supply, instalation, testing and commisioning of 400 Amp, 1 Mtr 10413.00
50KA breaking capacity (100% Neutral busbar) air insulated
compact Raising mains system made of CRCA sheet steel
encloser of thickness not less than 1.5 mm having degree of
protection of IP 55 as per 2127. wall strapes, fully PVC
insulated four strip ALUMINIUM busbar in convinent sections
including required end feed unit, end cover units suitable
for 415 volts 3 phase, 4 wire, 50 Hz A.C. System,etc., Makes:
Legrand / L&T / Seimens / Schiender / GE
377 ELEC-2.8.37 Supply and Fixing of 400 Amps Horizontal / Vertical bends 1 No 32750.00
Makes: Legrand / L&T / Seimens / Schiender / GE
378 ELEC-2.8.38 Supply and Fixing of 400 Amps Copper Flexibles for three 1 No 40850.00
phases and neutral Makes: Legrand / L&T / Seimens /
144
RATE FOR
SL.
NO.
2014-15
Schiender / GE
379 ELEC-2.8.39 Supply and Fixing of 400 Amps Tap off box Makes: Legrand / 1 No 44550.00
L&T / Seimens / Schiender / GE
380 ELEC-2.8.40 Supply and Fixing of 250 Amps Tap off box Makes: Legrand / 1 No 41600.00
L&T / Seimens / Schiender / GE
381 ELEC-2.8.41 Supply and Fixing of 250 Amps TPN 36KA DPX250-ER MCCB for 1 No 16573.00
tap off boxes for power supply Makes: Legrand / L&T /
Seimens / Schiender / GE
2.9 MCBs (AS PER IS:60898-1:2002)
382 ELEC-2.9.1 Supply of 6-32A 10KA SP MCB, C/D Curve ISI Mark of make 1 No 201.00
Legrand / Schneider.
384 ELEC-2.9.3 Supply of 6-32A 10KA DP MCB, C/D Curve ISI Mark of make 1 No 595.00
386 ELEC-2.9.5 Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark of make 1 No 955.00
388 ELEC-2.9.7 Supply of 6-32A 10KA FP MCB, C/D Curve ISI Mark of make 1 No 1281.00
389 ELEC-2.9.8 Supply of 40-63A FP MCB, C/D Curve ISI Mark of make Legrand 1 No 1899.00
/ Schneider.
Siemens / GE / ABB / GM / Standard / Havells / HPL / Hager.
397 ELEC-2.9.16 Supply of 40 - 63A 10KA FP MCB, C/D Curve ISI Mark of make 1 No 1424.00
Gold Medal / Milltec / Sputnik / Bentec / Sigma.
145
RATE FOR
SL.
NO.
2014-15
401 ELEC-2.9.20 Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark C-Curve of 1 No 501.00
make Gold Medal / Milltec / Sputnik / Bentec / Sigma.
403 ELEC-2.9.22 Supply of 40 - 63A 10KA TP MCB, C/D Curve ISI Mark of make 1 No 945.00
405 ELEC-2.9.24 Supply of 40 - 63A 10KA FP MCB, C/D Curve ISI Mark of make 1 No 1112.00
2.10 ISOLATORS CONFIRMS TO I E C 60947 PART-III
406 ELEC-2.10.1 Supply of 32A DP Isolator of make Legrand / Schneider. 1 No 338.00
409 ELEC-2.10.4 Supply of 40A TP Isolator of make Legrand / Schneider. 1 No 624.00
410 ELEC-2.10.5 Supply of 63A TP Isolator of make Legrand / Schneider. 1 No 725.00
411 ELEC-2.10.6 Supply of 40A FP Isolator of make Legrand / Schneider. 1 No 814.00
414 ELEC-2.10.9 Supply of 32A DP Isolator of make Siemens / GE / ABB / GM / 1 No 318.00
Standard / Havells / HPL / Hager.
417 ELEC-2.10.12 Supply of 40A TP Isolator of make Siemens / GE / ABB / GM / 1 No 585.00
418 ELEC-2.10.13 Supply of 63A TP Isolator of make Siemens / GE / ABB / GM / 1 No 590.00
419 ELEC-2.10.14 Supply of 40A FP Isolator of make Siemens / GE / ABB / GM / 1 No 678.00
420 ELEC-2.10.15 Supply of 63A FP Isolator of make Siemens / GE / ABB / GM / 1 No 734.00
421 ELEC-2.10.16 Supply of 100A FP Isolator of make Siemens / GE / ABB / GM 1 No 918.00
/ Standard / Havells / HPL / Hager.
422 ELEC-2.10.17 Supply of 32A DP Isolator of make Gold Medal / Milltec / 1 No 215.00
Sputnik / Bentec / Sigma.
425 ELEC-2.10.20 Supply of 40A TP Isolator of make Gold Medal / Milltec / 1 No 383.00
146
RATE FOR
SL.
NO.
2014-15
426 ELEC-2.10.21 Supply of 63A TP Isolator of make Gold Medal / Milltec / 1 No 428.00
427 ELEC-2.10.22 Supply of 40A FP Isolator of make Gold Medal / Milltec / 1 No 572.00
2.11 RCCBs CONFIRMS TO IEC:61008 AND IS:12640
428 ELEC-2.11.1 Supply of 40A 2 Pole RCCB 30mA, of makes Legrand / 1 No 2700.00
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
436 ELEC-2.11.9 Supply of 40A 2 Pole RCCB 30mA, of makes Siemens / GE / 1 No 2152.00
ABB / GM / Standard / Havells / HPL / Hager.
444 ELEC-2.11.17 Supply of MCB type Change Over Switch 20A Double Pole 2 1 No 1880.00
way 400V AC suitable to fix on Din Channel of makes Legrand /
Schneider.
2.12 MCB DISTRIBUTION BOARDS
(AS PER IS:13032)
445 ELEC-2.12.1 Supply of 4 Way SPN DB with IP 20 Protection as per IS:13032 1 No 760.00
and suitable for 4Nos S.P out goings and for 1 No Incommer
etc complete of makes Legrand / Schneider.
147
RATE FOR
SL.
NO.
2014-15
447 ELEC-2.12.3 Supply of 12 Way SPN DB with IP 20 Protection as per 1 No 1045.00
IS:13032 and suitable for 12Nos S.P out goings and for 1 No
Incommer etc complete of makes Legrand / Schneider.
IS:13032 and suitable for 12Nos S.P out goings and for 1 No
etc complete of makes Siemens / GE / ABB / GM / Standard /
Havells / HPL / Hager.
and suitable for 8 Nos S.P out goings and for 1 No Incommer
IS:13032 and suitable for 12 Nos S.P out goings and for 1 No
Incommer etc complete of makes Siemens / GE / ABB / GM /
etc completeof makes Siemens / GE / ABB / GM / Standard /
etc complete of makes Gold Medal / Milltec / Sputnik /
Bentec / Sigma.
Bentec / Sigma.
148
RATE FOR
SL.
NO.
2014-15
Incommer etc complete of makes Gold Medal / Milltec /
etc complete of makes Gold Medal / Milltec / Sputnik / Bentec
/ Sigma.
Bentec / Sigma.
463 ELEC-2.12.19 Supply of 4 Way TPN DB Horizontal with IP 20 Protection as 1 No 1500.00
per IS:13032 and suitable for 12 Nos S.P. out goings and for 1
No 4 pole Incommer etc complete of makes Legrand /
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
469 ELEC-2.12.25 Supply of 4 Way VTPN DB with IP 20 Protection as per 1 No 5125.00
IS:13032 and suitable for TP/SP out goings and for 1 No 4 pole
149
RATE FOR
SL.
NO.
2014-15
472 ELEC-2.12.28 Supply of 4 Way VTPN DB suitable for accommodating 4 pole 1 No 6045.00
incomer with IP 43 Protection as per IS:13032 and suitable for
TP/SP out goings etc complete of makes Legrand / Schneider.
TP/SP out goings etc complete of makes Legrand / Schneider.
8 Nos T.P. out goings etc complete of makes Legrand /
Schneider.
12 Nos T.P. out goings etc complete of makes Legrand /
Schneider.
476 ELEC-2.12.32 Supply of 7 Segment 4 Way TPN DB with IP 42 Protection with 1 No 6500.00
provision for FPMCB / Isolator / RCCB / RCBO as incomer,
3Nos DPMCB / Isolator / RCCB / RCBO as sub incomer and 12
Nos SPMCB's as out going of makes Legrand / Schneider.
3Nos DPMCB / Isolator / RCCB / RCBO as sub incomer and
24Nos SPMCB's as out going of makes Legrand / Schneider.
478 ELEC-2.12.34 Supply of 4 Way VTPN DB suitable for accomodating 125A / 1 No 7843.00
160A 4 Pole MCCB as incomer and 4 Nos TP MCBs as outgoing
and with IP 43 Protection of makes Legrand / Schneider.
479 ELEC-2.12.35 Supply of 8 Way VTPN DB suitable for accomodating 125A / 1 No 9823.00
160A 4 Pole MCCB as incomer and 8 Nos TP MCBs as outgoing
and with IP 43 Protection of makes Legrand / Schneider.
480 ELEC-2.12.36 Supply of 20A SP Plug and Socket in SS enclosure of makes 1 No 901.00
481 ELEC-2.12.37 Supply of 20A TP Plug and Socket in SS enclosure of makes 1 No 1915.00
No 4 pole Incommer etc complete of makes Siemens / GE /
150
RATE FOR
SL.
NO.
2014-15
No 4 pole Incommer etc complete of makesSiemens / GE /
Incommer etc complete of makesSiemens / GE / ABB / GM /
TP/SP out goings etc complete of makes Siemens / GE / ABB /
GM / Standard / Havells / HPL / Hager.
TP/SP out goings etc complete of makes Siemens / GE / ABB /
8 Nos T.P. out goings etc complete of makes Siemens / GE /
12 Nos T.P. out goings etc complete of makes Siemens / GE /
151
RATE FOR
SL.
NO.
2014-15
3Nos DPMCB / Isolator / RCCB / RCBO as sub incomer and 12
Nos SPMCB's as out going of makes Siemens / GE / ABB / GM /
3Nos DPMCB / Isolator / RCCB / RCBO as sub incomer and
24Nos SPMCB's as out going of makes Siemens / GE / ABB /
per IS:13032 and suitable for 12Nos S.P. out goings and for 1
No 4 pole Incommer etc complete of makes Gold Medal /
Milltec / Sputnik / Bentec / Sigma.
No 4 pole Incommer etc completeof makes Gold Medal /
Isolator as incomer with IP 20 Protection as per IS:13032 and
suitable for 4 Nos T.P. out goings etc complete of makes Gold
Medal / Milltec / Sputnik / Bentec / Sigma.
suitable for 6 Nos T.P. out goings and for 1 No 4 pole
152
RATE FOR
SL.
NO.
2014-15
511 ELEC-2.12.67 Supply of 20A SP Plug and Socket in SS enclosure of makes 1 No 590.00
514 ELEC-2.12.70 Supply of SP Enclosure with IP 20 Protection of makes Legrand 1 No 250.00
/ Schneider.
515 ELEC-2.12.71 Supply of DP/TP/FP Metal Enclosure with IP 20 Protection of 1 No 366.00
makes Legrand / Schneider.
SECTION - 3
3.1 STREET LIGHT LUMINAIRES
516 ELEC-3.1.1 Supply of 1 x 36/40 W fluorescent street light luminaire with 1 No 1400.00
sheet alluminium housing and UV stabilised acrylic cover with
Electronic ballast and all standard accessories etc of makes
Wipro / G.E. / Phillips.
Crompton / Bajaj / HPL / Surya / Havells / Pierlite.
Elton / Style Lamp / Mahita Electro / Capart / Akhil / RK.
519 ELEC-3.1.4 Supply of 70W SV / MH Street light luminaire integral with 1 No 3628.00
pressure diecast alluminium housing having pot optics with
IP66 protection with all standard accessories etc of makes
Wipro / G.E. / Phillips / Bajaj / Crompton / Havells / Surya.
153
RATE FOR
SL.
NO.
2014-15
HPL / Venture / Pierlite / Halonix.
528 ELEC-3.1.13 Supply of 150W MH Flood light luminaire with integral 1 No 5376.00
weather proof diecast alluminium housing with IP66
protection with all standard accessories etc of makes Wipro /
G.E. / Phillips / Bajaj / Crompton / Havells / Surya.
protection with all standard accessories etc of makes HPL /
Venture / Pierlite.
protection with all standard accessories etc of makes Elton /
Style Lamp / Mahita Electro / Capart / Akhil / RK.
154
RATE FOR
SL.
NO.
2014-15
Venture / Pierlite.
protection with all standard accessories etc of makes Elton /
Style Lamp / Mahita Electro / Capart / Akhil / RK.
Venture / Pierlite.
536 ELEC-3.1.21 Supply of 250W MH Flood light luminaire with Non - integral 1 No 7540.00
protection with Control Gear Box without lamp of makes
protection with Control Gear Box without lamp of makes HPL /
Venture / Pierlite.
protection with Control Gear Box without lamp of makes Elton
/ Style Lamp / Mahita Electro / Capart / Akhil / RK.
539 ELEC-3.1.24 Supply of 2 x 250W MH Flood light luminaire with Non - 1 No 14561.00
integral weather proof diecast alluminium housing with IP66
Wipro / G.E. / Phillips / Bajaj / Crompton / Havells.
Surya / Venture / Pierlite.
155
RATE FOR
SL.
NO.
2014-15
protection with Control Gear Box without lamp of makes Elton
/ Style Lamp / Mahita Electro / Capart / Akhil / RK.
546 ELEC-3.1.31 Supply of 500W Hallozen Flood light luminaire with cast 1 No 711.00
alluminium housing and tough end glass cover with all
standard accessories of makes Wipro / G.E. / Phillips / Bajaj /
Crompton / Havells.
standard accessories of makes HPL / Surya / Venture / Pierlite.
standard accessories of makes Elton / Style Lamp / Mahita
Electro / Capart / Akhil / RK.
standard accessories of makes Wipro / G.E. / Phillips / Bajaj /
Crompton / Havells.
standard accessories of makes HPL / Surya / Venture / Pierlite.
standard accessories of makes Elton / Style Lamp / Mahita
Electro / Capart / Akhil / RK.
552 ELEC-3.1.37 Supply of 1 x 26W CFL well glass, low bay luminaire with die 1 No 2250.00
cast alluminium housing epoxy gray powder coated built in
Electronic ballast with gink plated wire guard and eye bolt of
make Wipro / G.E. / Phillips / Bajaj / Crompton / Havells.
3.2 POST TOP LANTERN LUMINAIRES
553 ELEC-3.2.1 Supply of 1 x 18W CFL integral post top luminaire with conical 1 No 1838.00
shape, opal clear acrylic diffuser with cast alluminium pole
mounting capsule complete with all accessories and ballast of
makes Crompton / Bajaj / Surya / Havells / HPL.
156
RATE FOR
SL.
NO.
2014-15
554 ELEC-3.2.2 Supply of 70W SV / MH integral HID lamp post top lantern 1 No 3822.00
BJDPTI 70SV / MH LPF or its equivalent with diamond /
Mushroom / Spherical diffuser etc complete with all
accessories of makes Wipro / Phillips / Bajaj / Crompton /
Surya / HPL / Pierlite / Havells.
ACCESSORIES FOR MV / SV / MH LUMINAIRES
3.3 COPPER BALLASTS
555 ELEC-3.3.1 Supply of 80W MV copper ballast of makes G.E. / Phillips / 1 No 709.00
Crompton / Bajaj / Surya / Havells / Venture / Pierlite.
556 ELEC-3.3.2 Supply of 80W MV copper ballast of makes RK / Style Lamp / 1 No 643.00
Akhil / Capart / Mahitha Electro.
557 ELEC-3.3.3 Supply of 125W MV copper ballast.of makes G.E. / Phillips / 1 No 775.00
Crompton / Bajaj / Surya / Havells / Venture / Pierlite.
558 ELEC-3.3.4 Supply of 125W MV copper ballast.of makes RK / Style Lamp / 1 No 652.00
Akhil / Capart / Mahitha Electro.
559 ELEC-3.3.5 Supply of 70 W SV / MH copper ballast.of makes Wipro / G.E. / 1 No 756.00
Phillips.
560 ELEC-3.3.6 Supply of 70 W SV / MH copper ballast.of makes Crompton / 1 No 643.00
Bajaj / Surya / HPL / Havells / Venture / Pierlite.
561 ELEC-3.3.7 Supply of 70 W SV / MH copper ballast.of makes RK / Style 1 No 615.00
Lamp / Akhil / Capart / Mahitha Electro.
562 ELEC-3.3.8 Supply of 150 W SV / MH copper ballast.of makes Wipro / 1 No 1182.00
G.E. / Phillips.
565 ELEC-3.3.11 Supply of 250 W SV / MH copper ballast.of makes Wipro / G.E. 1 No 1701.00
/ Phillips.
568 ELEC-3.3.14 Supply of 400 W SV / MH copper ballast.of makes Wipro / G.E. 1 No 2457.00
/ Phillips.
571 ELEC-3.3.17 Supply of Ignitor for SV / MH Lamp of makes Wipro / G.E. / 1 No 180.00
Phillips / Crompton / Bajaj / Surya / HPL / Havells / Venture /
Pierlite.
572 ELEC-3.3.18 Supply of 4 mfd HPF Capacitor of makes TIBCON / Phillips / 1 No 120.00
Crompton / Bajaj / Surya / Havells.
157
RATE FOR
SL.
NO.
2014-15
ENEGRY SAVING ELECTRONIC BALLAST FOR STREET LIGHT
578 ELEC-3.3.24 Supply of 70W SV / MH Electronic ballast having < 3W loss, 1 No 2450.00
PF > 0.90, THD < 15% with 3 years guarantee of makes Phillips
/ Whipro / Trinic / GE.
581 ELEC-3.3.27 Supply of 400W SV / MH Electronic ballasthaving < 3W loss, PF 1 No 5400.00
> 0.90, THD < 15% with 3 years guarantee of makes Phillips /
Whipro / Trinic / GE.
BALLASTS FOR INDUCTION LAMPS
582 ELEC-3.3.28 Supply of 40W ballasts for Induction Lamp of Makes Crompton 1 No 5000.00
/ Bajaj / Surya / Synergy Solutions / Fortune Art / Billion Light.
583 ELEC-3.3.29 Supply of 80W ballasts for Induction Lamp of Makes Crompton 1 No 5500.00
/ Bajaj / Surya / Synergy Solutions / Fortune Art / Billion Light.
584 ELEC-3.3.30 Supply of 120W ballasts for Induction Lamp of Makes 1 No 6500.00
Crompton / Bajaj / Surya / Synergy Solutions / Fortune Art /
Billion Light.
Billion Light.
Billion Light.
Billion Light.
3.4 LAMPS
588 ELEC-3.4.1 Supply of 500W Hallozen Lamp with ISI mark of makes Wipro / 1 No 108.00
G.E. / Phillips / Osram.
589 ELEC-3.4.2 Supply of 500W Hallozen Lamp with ISI mark of makes 1 No 80.00
Crompton / Bajaj / Surya / HPL / Havells / Pierlite.
590 ELEC-3.4.3 Supply of 500W Hallozen Lamp with ISI mark of makes Elton / 1 No 60.00
Style Lamp / Mahita Electro / Capart
591 ELEC-3.4.4 Supply of 1000W Hallozen Lamp with ISI mark of makes Wipro 1 No 130.00
/ G.E. / Phillips / Osram.
158
RATE FOR
SL.
NO.
2014-15
592 ELEC-3.4.5 Supply of 1000W Hallozen Lamp with ISI mark of makes 1 No 100.00
593 ELEC-3.4.6 Supply of 1000W Hallozen Lamp with ISI mark of makes Elton 1 No 80.00
/ Style Lamp / Mahita Electro / Capart
594 ELEC-3.4.7 Supply of 70W SV Lamp with ISI mark of makes Wipro / G.E. / 1 No 495.00
Phillips / Osram.
595 ELEC-3.4.8 Supply of 70W SV Lamp with ISI mark of makes Crompton / 1 No 450.00
596 ELEC-3.4.9 Supply of 70W SV Lamp with ISI mark of makes Elton / Style 1 No 400.00
Lamp / Mahita Electro / Capart
Phillips / Osram.
Phillips / Osram.
Phillips / Osram.
606 ELEC-3.4.19 Supply of 70W double end MH Lamp with ISI mark of makes 1 No 605.00
Wipro / G.E. / Phillips / Osram.
Elton / Style Lamp / Mahita Electro / Capart
Wipro / G.E. / Phillips / Osram.
Elton / Style Lamp / Mahita Electro / Capart
612 ELEC-3.4.25 Supply of 70W MH Lamp with ISI mark of makes Crompton / 1 No 890.00
Bajaj / Surya / HPL / Havells / Pierlite.
613 ELEC-3.4.26 Supply of 70W MH Lamp with ISI mark of makes Elton / Style 1 No 850.00
614 ELEC-3.4.27 Supply of 150W MH Lamp with ISI mark of makes Wipro / G.E. 1 No 990.00
/ Phillips / Osram.
159
RATE FOR
SL.
NO.
2014-15
/ Phillips / Osram.
/ Phillips / Osram.
623 ELEC-3.4.36 Supply of 80W MV Lamp with ISI mark of makes Wipro / G.E. / 1 No 180.00
Phillips / Osram.
624 ELEC-3.4.37 Supply of 80W MV Lamp with ISI mark of makes Crompton / 1 No 160.00
625 ELEC-3.4.38 Supply of 80W MV Lamp with ISI mark of makes Elton / Style 1 No 140.00
626 ELEC-3.4.39 Supply of 125W MV Lamp with ISI mark of makes Wipro / G.E. 1 No 190.00
/ Phillips / Osram.
/ Phillips / Osram.
/ Phillips / Osram.
3.5 NATURE SWITCHES
635 ELEC-3.5.1 Supply of Swadeep Nature Switch or its equivalent with 1 No 10978.00
suitable SMC enclousure, MCBs contactor suitable to control
the load of 3 KW of single phase load.
160
RATE FOR
SL.
NO.
2014-15
the load of 5 KW of Three phase load.
3.6 INTERNAL LUMINAIRES
641 ELEC-3.6.1 Supply of 1 x 11W Mirror light with all standard accessories 1 No 678.00
diffuser of makes G.E. / Phillips / Crompton / Bajaj.
642 ELEC-3.6.2 Supply of 1 x 11W Mirror light with all standard accessories 1 No 578.00
diffuser of makes Surya / Havells / HPL / Fortune Art
643 ELEC-3.6.3 Supply of 1 x 36/40W Box type tube light luminaire powder 1 No 599.00
coated CRCA sheet steel housing with VPIT Chokes and all
standard accessories of makes Crompton / Bajaj / Surya /
Havells / HPL.
coated CRCA sheet steel housing with Electronic Ballast
Chokes and all standard accessoriesof makes Wipro / G.E. /
Phillips / Crompton / Bajaj .
Chokes and all standard accessoriesof makes Surya / Havells /
HPL / Fortune Art
Chokes and all standard accessoriesof makes Wipro / G.E. /
Phillips / Crompton / Bajaj.
Chokes and all standard accessoriesof makes Surya / Havells /
HPL / Fortune Art
648 ELEC-3.6.8 Supply of 1 x 36/40W Patty type tube light luminaire powder 1 No 273.00
coated CRCA sheet steel housing with Copper Chokes and all
standard accessories of makes Crompton / Bajaj / Surya /
Havells / HPL.
161
RATE FOR
SL.
NO.
2014-15
649 ELEC-3.6.9 Supply of 1 x 36/40W Patty type tube light luminaire powder 1 No 231.00
coated CRCA sheet steel housing with Copper Chokes and all
standard accessories of makes Elton / RK / Million / Gold
Medal / Vimal / Akhil.
650 ELEC-3.6.10 Supply of 2 x 36/40W Surface / Recessed mounting mirror 1 No 2593.50
optic luminaire with powder coated CRCA sheet steel housing
with alluminium mirror reflector and decorative end plates
with Electronic Ballast of makes Wipro / G.E. / Phillips /
Crompton.
651 ELEC-3.6.11 Supply of 2 x 36/40W Surface / Recessed mounting mirror 1 No 2369.20
optic luminaire with powder coated CRCA sheet steel housing
with alluminium mirror reflector and decorative end plates
with Electronic Ballast, of makes Bajaj / Surya / HPL / Havells.
652 ELEC-3.6.12 Supply of 2 x 36W CFL Paralite louvre (P5) Surface / Recessed 1 No 4218.00
low glare Mirror Optic luminaire comprising bright anodised
alluminium reflector with Electronic Ballst of makes Wipro /
G.E. / Phillips / Crompton / Bajaj.
653 ELEC-3.6.13 Supply of 2 x 36W CFL Paralite louvre (P5) Surface / Recessed 1 No 3347.00
low glare Mirror Optic luminaire comprising bright anodised
alluminium reflector with Electronic Ballst of makes Surya /
Havells / HPL / Pierlite.
654 ELEC-3.6.14 Supply of 2 x 36W CFL Direct / Indirect Recessed low glare 1 No 3749.00
Mirror Optic luminaire comprising bright anodised alluminium
reflector with Electronic Ballst of makes Wipro / G.E. / Phillips
/ Crompton / Bajaj.
655 ELEC-3.6.15 Supply of 2 x 36W CFL Direct / Indirect Recessed low glare 1 No 2901.00
Mirror Optic luminaire comprising bright anodised alluminium
reflector with Electronic Ballst of makes Surya / Havells /
Trinic / HPL / Pierlite.
656 ELEC-3.6.16 Supply of 1 x 13/18W CFL Indoor recessed mounting 1 No 898.00
horizontal type down lights luminaire with alluminium/Matt
finished reflecttor with Electronic Ballast of makes Wipro /
finished reflecttor with Electronic Ballast of makes Pierlite /
Surya / Havells / HPL / Fortune Art.
finished reflecttor with Electronic Ballast of makes Wipro /
finished reflecttor with Electronic Ballast of makes Pierlite /
162
RATE FOR
SL.
NO.
2014-15
horizontal type down lights luminaire with Frosted glass cover
reflecttor with Electronic Ballast of makes Wipro / G.E. /
reflecttor with Electronic Ballast of makes Pierlite / Surya /
Havells / HPL / Fortune Art.
reflecttor with Electronic Ballast of makes Wipro / G.E. /
reflecttor with Electronic Ballast of makes Pierlite / Surya /
Havells / HPL / Fortune Art.
664 ELEC-3.6.24 Supply of Recessed mounting 12V 50W adjustable Halozen 1 No 741.00
down light with white colour gold shade including transformer
Wipro / G.E. / Phillips / Crompton / Bajaj.
665 ELEC-3.6.25 Supply of Recessed mounting 12V 50W adjustable Halozen 1 No 667.00
of make Pierlite / Surya / Havells / HPL / Fortune Art.
666 ELEC-3.6.26 Supply of Recessed mounting 12V 50W zoom type Halozen 1 No 978.00
of makes Wipro / G.E. / Phillips / Crompton / Bajaj.
667 ELEC-3.6.27 Supply of Recessed mounting 12V 50W zoom type Halozen 1 No 878.00
of makes Surya / Havells.
668 ELEC-3.6.28 Supply of 9/13W VPIT Ballast for CFL with ISI mark of makes 1 No 140.00
Elton / RK / Style Lamp / Mahita Electro / Capart
671 ELEC-3.6.31 Supply of 18W VPIT Ballast for CFL with ISI mark of makes 1 No 140.00
Elton / RK / Style Lamp / Mahita Electro / Capart
674 ELEC-3.6.34 Supply of 20W Copper Wound Ballast of makes Wipro / G.E. / 1 No 180.00
675 ELEC-3.6.35 Supply of 20W Copper Wound Ballast of makes Surya / 1 No 160.00
Havells / HPL / Fortune Art
676 ELEC-3.6.36 Supply of 20W Copper Wound Ballast of makes Elton / RK / 1 No 146.00
Ballast Makers / Krishilite / Style Lamp / Akhil / Capart /
Million / Gold Medal / Vimal.
163
RATE FOR
SL.
NO.
2014-15
677 ELEC-3.6.37 Supply of 40W Copper Wound Ballast of makes Wipro / G.E. / 1 No 180.00
678 ELEC-3.6.38 Supply of 40W Copper Wound Ballast of makes Surya / 1 No 160.00
Havells / HPL / Fortune Art
679 ELEC-3.6.39 Supply of 40W Copper Wound Ballast of makes Elton / RK / 1 No 145.00
Ballast Makers / Krishilite / Style Lamp / Akhil / Capart /
Million / Gold Medal / Vimal.
680 ELEC-3.6.40 Supply of 18/20W VPIT Ballast Wipro / G.E. / Phillips / 1 No 180.00
Crompton / Bajaj.
681 ELEC-3.6.41 Supply of 18/20W VPIT Ballast Surya / Havells / HPL / Fortune 1 No 160.00
Art
682 ELEC-3.6.42 Supply of 18/20W VPIT Ballast Elton / RK / Style Lamp / 1 No 145.00
Mahita Electro / Capart
683 ELEC-3.6.43 Supply of 36/40W VPIT Ballast Wipro / G.E. / Phillips / 1 No 210.00
Crompton / Bajaj.
684 ELEC-3.6.44 Supply of 36/40W VPIT Ballast Surya / Havells / HPL / Fortune 1 No 180.00
Art
685 ELEC-3.6.45 Supply of 36/40W VPIT Ballast Elton / RK / Style Lamp / 1 No 170.00
Mahita Electro / Capart / Million / Gold Medal / Vimal.
686 ELEC-3.6.46 Supply of 40W Starter of makes Wipro / G.E. / Phillips / 1 No 11.00
Crompton / Bajaj.
687 ELEC-3.6.47 Supply of 40W Starter of makes Surya / Havells / HPL / 1 No 9.00
Fortune Art
688 ELEC-3.6.48 Supply of 40W Starter of makes Elton / RK / Style Lamp / 1 No 8.00
689 ELEC-3.6.49 Supply of Rotor holder(FTL) of makes Wipro / G.E. / Phillips / 1 No 21.00
Crompton / Bajaj.
690 ELEC-3.6.50 Supply of Rotor holder(FTL) of makes Surya / Havells / HPL / 1 No 19.00
Fortune Art
691 ELEC-3.6.51 Supply of Rotor holder(FTL) of makes Elton / RK / Style Lamp / 1 No 17.00
692 ELEC-3.6.52 Supply of HID Lamp holder of makes Wipro / G.E. / Phillips / 1 No 53.00
Crompton / Bajaj.
693 ELEC-3.6.53 Supply of HID Lamp holder of makes Surya / Havells / HPL / 1 No 48.00
Fortune Art
694 ELEC-3.6.54 Supply of HID Lamp holder of makes Elton / RK / Style Lamp / 1 No 42.00
695 ELEC-3.6.55 Supply of CFL holder of makes Wipro / G.E. / Phillips / 1 No 32.00
Crompton / Bajaj.
696 ELEC-3.6.56 Supply of CFL holder of makes Surya / Havells / HPL / Fortune 1 No 27.00
Art
697 ELEC-3.6.57 Supply of CFL holder of makes Elton / RK / Style Lamp / Mahita 1 No 25.00
Electro / Capart
698 ELEC-3.6.58 Supply of FTL Starter holder of makes Wipro / G.E. / Phillips / 1 No 15.00
Crompton / Bajaj.
699 ELEC-3.6.59 Supply of FTL Starter holder of makes Surya / Havells. 1 No 13.00
164
RATE FOR
SL.
NO.
2014-15
700 ELEC-3.6.60 Supply of FTL Starter holder of makes Elton / RK / Style Lamp / 1 No 12.00
701 ELEC-3.6.61 Supply of 36W Electronic Ballast with total hormonic 1 No 693.00
distortion is less than 10% for FTL of makes Wipro / G.E. /
702 ELEC-3.6.62 Supply of 36W Electronic Ballast with total hormonic 1 No 614.00
distortion is less than 10% for FTL of makes Surya / HPL /
Havells.
703 ELEC-3.6.63 Supply of 36W Electronic ballast with power factor greater 1 No 275.00
than 0.9 to 0.95 suitable for FTL. Make : Crompton Model
No.EBN 136D / Bajaj Model No.BJHF 136 / Havells LHBF
27904025 or its equivalent.
704 ELEC-3.6.64 Supply of 2 x 36/40W Industrial Box type tube light luminaire 1 No 1615.00
powder coated CRCA sheet steel housing with Reflector and
Electronic ballast and all standard accessories of makes
Crompton / Bajaj / Surya / HPL / Havells.
705 ELEC-3.6.65 Supply of 4 x 14W TL 5 high efficiency recessed luminaire, 1 No 4779.00
epoxy powder coated CRCA sheet steel housing, low glare
with electronic ballast including cost of lamps etc., complete.
Makes: Phillips Model No.sereno-TBS 869 / Bajaj Model
No.BTMRA 414 CAT II / Crompton Model No.CRTLU414EB/S.
706 ELEC-3.6.66 Supply of 1 x 28W surface pendent mounting T5 Luminaire 1 No 950.00
Box type with CRCA housing with Electronic Ballast and all
standard accessories of makes Phillips / Crompton / Bajaj /
Surya / Havells.
707 ELEC-3.6.67 Supply of 1 x 28W surface pendent mounting T5 Luminaire 1 No 608.00
plastic housing with integrated reflector extruded alluminium
luminaire with Electronic Ballast and all standard accessories
of makes Phlillips / Crompton / Bajaj / Surya / Havells.
3.7 FLOURSCENT TUBES / CFL LAMPS / LED BULBS
708 ELEC-3.7.1 Supply of 40W-60W Lamp of makes Wipro / G.E. / Phillips / 1 No 12.00
Crompton / Bajaj / Surya.
709 ELEC-3.7.2 Supply of 40W-60W Lamp of makes Elton / Style Lamp / 1 No 10.00
710 ELEC-3.7.3 Supply of Night Lamp of makes Wipro / G.E. / Phillips / 1 No 11.00
Crompton / Bajaj.
711 ELEC-3.7.4 Supply of 18/20W fluorescent tube of makes Wipro / G.E. / 1 No 41.00
712 ELEC-3.7.5 Supply of 18/20W fluorescent tube of makes Surya / Havells / 1 No 39.00
HPL / Fortune Art
713 ELEC-3.7.6 Supply of 18/20W fluorescent tube of makes Elton / Style tube 1 No 38.00
/ Mahita Electro / Capart
714 ELEC-3.7.7 Supply of 36/40W fluorescent tube of makes Wipro / G.E. / 1 No 45.00
715 ELEC-3.7.8 Supply of 36/40W fluorescent tube of makes Surya / Havells / 1 No 40.00
HPL / Fortune Art
165
RATE FOR
SL.
NO.
2014-15
716 ELEC-3.7.9 Supply of 36/40W fluorescent tube of makes Elton / Style tube 1 No 38.00
/ Mahita Electro / Capart
717 ELEC-3.7.10 Supply of 28W T5 fluorescent tube of makes Crompton / Bajaj 1 No 120.00
/ Phillips / Surya / Havells.
718 ELEC-3.7.11 Supply of 9W Pin type CFL Lamp of makes Wipro / G.E. / 1 No 75.00
719 ELEC-3.7.12 Supply of 9W Pin type CFL Lamp of makes Surya / Havells / 1 No 70.00
HPL / Fortune Art / Halonix.
730 ELEC-3.7.23 Supply of up to 5W Retrofit tiny CFL of makes Wipro / G.E. / 1 No 115.00
731 ELEC-3.7.24 Supply of up to 5W Retrofit tiny CFL of makes Surya / Havells 1 No 110.00
/ HPL / Fortune Art / Halonix.
732 ELEC-3.7.25 Supply of up to 8W Retrofit tiny CFL of makes Wipro / G.E. / 1 No 125.00
733 ELEC-3.7.26 Supply of up to 8W Retrofit tiny CFL of makes Surya / Havells 1 No 120.00
734 ELEC-3.7.27 Supply of up to 10/11W Retrofit tiny CFL of makes Wipro / 1 No 135.00
735 ELEC-3.7.28 Supply of up to 10/11W Retrofit tiny CFL of makes Surya / 1 No 130.00
Havells / HPL / Fortune Art / Halonix.
736 ELEC-3.7.29 Supply of up to 13/14W Retrofit tiny CFL of makes Wipro / 1 No 110.00
737 ELEC-3.7.30 Supply of up to 13/14W Retrofit tiny CFL of makes Surya / 1 No 100.00
738 ELEC-3.7.31 Supply of 15W Retrofit tiny CFL of makes Wipro / G.E. / 1 No 180.00
166
RATE FOR
SL.
NO.
2014-15
739 ELEC-3.7.32 Supply of 15W Retrofit tiny CFL of makes Surya / Havells / 1 No 150.00
740 ELEC-3.7.33 Supply of up to 18/20W Retrofit CFL of makes Wipro / G.E. / 1 No 170.00
741 ELEC-3.7.34 Supply of up to 18/20W Retrofit CFL of makes Surya / Havells 1 No 150.00
742 ELEC-3.7.35 Supply of 23W Retrofit CFL of makes Wipro / G.E. / Phillips / 1 No 200.00
Crompton / Bajaj.
743 ELEC-3.7.36 Supply of 23/25W Retrofit CFL of makes Surya / Havells / 1 No 180.00
744 ELEC-3.7.37 Supply of up to 25/26W Retrofit CFL of makes Wipro / G.E. / 1 No 200.00
745 ELEC-3.7.38 Supply of up to 25/26W Retrofit CFL of makes Surya / Havells 1 No 180.00
746 ELEC-3.7.39 Supply of up to 9 W Non - Retrofit CFL of makes Wipro / G.E. / 1 No 100.00
747 ELEC-3.7.40 Supply of up to 9 W Non - Retrofit CFL of makes Surya / 1 No 80.00
748 ELEC-3.7.41 Supply of up to 11W Non - Retrofit CFL of makes Wipro / G.E. 1 No 110.00
/ Phillips / Crompton / Bajaj.
749 ELEC-3.7.42 Supply of up to 11W Non - Retrofit CFL of makes Surya / 1 No 80.00
754 ELEC-3.7.47 Supply of 0.5W LED Lamp with input voltage 90 to 300V, 80.00
Colour temparature 3000k - 6500k, Beam angle 170 - 220
degrees, B22 base, 40 Lumens of Makes: Phillips / OSRAM /
GE / Crompton / VIN / Bajaj / Havells / Halonix
167
RATE FOR
SL.
NO.
2014-15
758 ELEC-3.7.51 Supply of LED Candel Lamp for shandliers of Makes: Phillips / 425.00
OSRAM / GE / Crompton / VIN / Bajaj / Havells / Halonix
3.8 ENERGY CONSERVING FIXTURES
759 ELEC-3.8.1 Supply of 1 x 28W Patty type powder coated energy 1 No 950.00
conserving tube light luminaire with Electronic ballast
operating voltage range of 90 volts to 350 volts power factor >
0.98 current less than 130ma crest factor and total hormonic
distortion shall be as per IS Specification with auto cut off at
high voltage suitable for 36/40W tube with 5 years guarantee
for luminaire. Makes: Trinic or equivalent.
760 ELEC-3.8.2 Supply of 1 x 28W Box type powder coated energy conserving 1 No 1060.00
tube light luminaire with Electronic ballast operating voltage
range of 90 volts to 350 volts power factor > 0.98 current less
than 130ma crest factor and total hormonic distortion shall be
as per IS Specification with auto cut off at high voltage
suitable for 36/40W tube with 5 years guarantee for
luminaire. Makes: Trinic or equivalent.
761 ELEC-3.8.3 Supply of Recessed mounted mirror optic luminaire with 1 No 4100.00
paralite louvers (P5) suitable for 2 x 36W CFL lamps. Electronic
ballast operating voltage range of 90 volts to 350 volts power
factor > 0.98 current less than 130ma crest factor and total
hormonic distortion shall be as per the IS Specification with
auto cut off at High Voltage suitable for 36/40W tube with 5
years guarantee for luminaire. Makes: Trinic or equivalent.
762 ELEC-3.8.4 Supply of 28 W Electronic Ballast with less than 10% total 1 No 800.00
hormonic distortion and auto cut off at High Voltage suitable
for FTL with 5 years guarantee for luminaire. Makes: Trinic or
equivalent.
3.9 LED LUMINAIRES INDOOR
763 ELEC-3.9.1 Supply and Transportation of 6W Down lighter Recessed / 1 No 2040.00
Surface mounting made of diecast alluminium body with
powder coating, acrylic diffuser with Driver, operating voltage
range of 150 to 265 Volts AC, Power factor > 0.9 with high
power LED's having efficacy of > 120 lumins/watt etc.,
complete with 3 years warranty.
a) LUMINAIRE MAKE : Phillips / OSRAM / GE / Crompton / VIN
/ Bajaj / Havells.
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /
SAMSUNG.
a) LUMINAIRE MAKE: Halonix / Surya / MIC / BLU / KRIPA
Lights / Fortune Art / CAPART/ SEMTRONICS / Syska.
168
RATE FOR
SL.
NO.
2014-15
b) LED MAKE: PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /
SAMSUNG.
a) LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton / VIN
/ Bajaj / Havells.
SAMSUNG.
a) LUMINAIRE MAKE: Halonix / Surya / MIC / BLU / KRIPA
Lights / Fortune Art / CAPART/ SEMTRONICS / Syska.
SAMSUNG.
/ Bajaj / Havells.
SAMSUNG.
a) LUMINAIRE MAKE : Halonix / Surya / MIC / BLU / KRIPA
Lights / Fortune Art / SEMTRONICS / Syska.
SAMSUNG.
range of 150 to 265 Volts AC, Power factor > 0.9 high power 6
Nos of 1 W LED 1 watt having efficacy of > 120 lumins/watt
169
RATE FOR
SL.
NO.
2014-15
etc., complete with 3 years warranty. a) LUMINAIRE MAKE :
Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells.b) LED
MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /
SAMSUNG.
SAMSUNG.
771 ELEC-3.9.9 Supply and transportation of 18W, 1600 lumins, 1200mm 1 No 1935.00
length LED retrofit tube light, input voltage AC 220 - 260 Volts
with >0.9 PF with inbuilt driver and frosted cover etc.,
complete with 3 years warranty. Makes:Phillips / GE /
Crompton / VIN / Bajaj.
772 ELEC-3.9.10 Supply and transportation of 18W 1200mm length, 1600 1 No 1572.00
lumins, LED retrofit tube light, input voltage AC 220 - 260
Volts with >0.9 PF with driver and frosted cover etc.,
complete with 3 years warranty. Makes:Halonix / Surya / MIC
/ BLU / KRIPA Lights / Fortune Art / SEMTRONICS / Syska.
length, T5 LED tube light fitting, input voltage AC 220 - 260
complete with 3 years warranty. Makes:Phillips / GE /
Crompton / VIN / Bajaj.
length, T5 LED tube light fitting, input voltage AC 220 - 260
complete with 3 years warranty. Makes:Halonix / Surya / MIC
/ BLU / KRIPA Lights / Fortune Art / SEMTRONICS / Syska.
775 ELEC-3.9.13 Supply and Transportation of 36W Recessed / Surface slim LED 1 No 7680.00
panel of 600mm x 600mm made of alluminium body with
acrylic diffuser, Constant current out put of Driver operating
voltage range of 150 to 265 Volts AC, Power factor > 0.9 high
power LEDs having efficacy of > 120 lumins/watt, junction
temparature less than 85 degrees centigrade and THD is less
than 12% etc., complete with 3 years warranty.
/ Bajaj / Havells.
SAMSUNG.
776 ELEC-3.9.14 Supply and Transportation of 36W Recessed / Surface slim LED 1 No 6825.00
panel of 600mm x 600mm made of alluminium body with
acrylic diffuser, Constant current out put of Driver operating
170
RATE FOR
SL.
NO.
2014-15
voltage range of 150 to 265 Volts AC, Power factor > 0.9 high
power LEDs having efficacy of > 120 lumins/watt, junction
temparature less than 85 degrees centigrade and THD is less
than 12% etc., complete with 3 years warranty.
SAMSUNG.
777 ELEC-3.9.15 Supply and Transportation of 36W Recessed / Surface 1 No 7875.00
mounting 2' x 2' LED luminaire made of CRCA sheet housing
with powder coated with acrylic diffuser, Constant current out
put of Driver operating voltage range of 150 to 265 Volts AC,
Power factor > 0.9 high power LEDs having efficacy of > 120
lumins/watt, junction temparature less than 85 degrees
centigrade and THD is less than 12% etc., complete with 3
years warranty. a) LUMINAIRE MAKE : Phillips / OSRAM / GE /
Crompton / VIN / Bajaj / Havells.b) LED MAKE : PHILIPS
LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
mounting 2' x 2' LED luminaire made of CRCA sheet housing
with powder coated with acrylic diffuser, Constant current out
put of Driver operating voltage range of 150 to 265 Volts AC,
lumins/watt, junction temparature less than 85 degrees
centigrade and THD is less than 12% etc., complete with 3
years warranty.
SAMSUNG.
mounting 2' x 2' LED luminaire made of pressure diecast
alluminium housing body with extended heat sink and
moulded diffuser, high effeiciency and low power loss driver,
lumins/watt, rated life of 50000 hours etc., complete with 3
years warranty GE make Mapple series or its equivalent.
a) LUMINAIRE MAKE : Phillips / GE / Crompton / VIN / Bajaj /
Havells.
SAMSUNG.
780 ELEC-3.9.18 Supply and transportation of 6W to 9W LED Drivers 1 No 500.00
781 ELEC-3.9.19 Supply and transportation of 12W to 18W LED Drivers 1 No 750.00
LED STREET LIGHTS
Supply and transportation of ......... LED Street light Luminaire
made of pressure diecast alluminium body with powder
coated, having toughned glass cover input voltage range of
100 to 270 volts AC, power factor > 0.90, high power LED's
having efficacy 120 lumines/watt and junction temprature <
171
RATE FOR
SL.
NO.
2014-15
85 degree centegrade of IP 65 with optics, total hormonic
destortion less than 15% at 110 Volts AC, driver efficiency
>90% etc., complete with 5 years warranty.
a) LUMINAIRE MAKE : PHILIPS / OSRAM / GE / VIN /
CROMPTON / BAJAJ.
SAMSUNG.
782 ELEC-3.9.20 20W 1 No 9467.00
783 ELEC-3.9.21 30W 1 No 14415.00
784 ELEC-3.9.22 60W 1 No 20000.00
785 ELEC-3.9.23 90W 1 No 26250.00
786 ELEC-3.9.24 120W 1 No 37312.00
787 ELEC-3.9.25 180W 1 No 49000.00
788 ELEC-3.9.26 210W 1 No 55000.00
789 ELEC-3.9.27 240W 1 No 61000.00
790 ELEC-3.9.28 270W 1 No 67000.00
Supply and transportation of ......... LED Street light Luminaire

made of pressure diecast alluminium body with powder
coated, having toughned glass cover input voltage range of
100 to 270 volts AC, power factor > 0.90, high power LED's
having efficacy 120 lumines/watt and junction temprature <
85 degree centegrade of IP 65 with optics, total hormonic
destortion less than 15% at 110 Volts AC, driver efficiency
>90% etc., complete with 5 years warranty.
a) LUMINAIRE MAKE: SURYA / MIC / BLU / KRIPA LIGHTS /
FORTUNE ART / CAPART/ SEMTRONICS / SYSKA.
SAMSUNG.
791 ELEC-3.9.29 20W 1 No 7199.00
792 ELEC-3.9.30 30W 1 No 9450.00
793 ELEC-3.9.31 60W 1 No 13650.00
794 ELEC-3.9.32 90W 1 No 21700.00
3.10 INDUCTION LUMINARIES
Supply and Transportation of Induction Type street light
luminaire of following capacities comprises of single piece die
cast Aluminium body and IP65 protection including Induction
lamp and ballast etc., Complete with 5 years warranty. Make:
Crompton / Bajaj / Surya.
795 ELEC-3.10.1 40W 1 No 17513.00
796 ELEC-3.10.2 80W 1 No 19752.00
797 ELEC-3.10.3 120W 1 No 22385.00
798 ELEC-3.10.4 150W 1 No 24363.00
799 ELEC-3.10.5 200W 1 No 28750.00
Supply and Transportation of Induction Type street light
cast Aluminium body and IP65 protection including Induction
172
RATE FOR
SL.
NO.
2014-15
lamp and ballast etc., Complete with 5 years warranty. Make:
LVD RAES / Billion Light / Fortune Art / Synergy Solutions.
800 ELEC-3.10.6 40W 1 No 15228.00
801 ELEC-3.10.7 80W 1 No 17175.00
802 ELEC-3.10.8 120W 1 No 19465.00
803 ELEC-3.10.9 150W 1 No 21185.00
804 ELEC-3.10.10 200W 1 No 25000.00
Supply and Transportation of Induction Type Flood light
cast Aluminium body and IP65 protection of including
Induction lamp and ballast etc., Complete with 5 years
warranty. Make: Crompton / Bajaj / Surya.
805 ELEC-3.10.11 40W 1 No 18791.00
806 ELEC-3.10.12 80W 1 No 21045.00
807 ELEC-3.10.13 120W 1 No 23690.00
808 ELEC-3.10.14 150W 1 No 25645.00
809 ELEC-3.10.15 200W 1 No 27600.00
810 ELEC-3.10.16 2 x 200W 1 No 52670.00
Supply and Transportation of Induction Type Flood light
cast Aluminium body and IP65 protection of including
Induction lamp and ballast etc., Complete with 5 years
warranty. Make: LVD RAES / Billion Light / Fortune Art /
Synergy Solutions.
811 ELEC-3.10.17 40W 1 No 16340.00
812 ELEC-3.10.18 80W 1 No 18300.00
813 ELEC-3.10.19 120W 1 No 20600.00
814 ELEC-3.10.20 150W 1 No 22300.00
815 ELEC-3.10.21 200W 1 No 24000.00
816 ELEC-3.10.22 2 x 200W 1 No 45800.00
Supply and Transportation of Induction Type suspended type
decorative high bay luminaire with polycarbonate refractor,
decorative integral die cast alluminium housing with heat
shrinks including Induction lamp and ballast etc., Complete
with 5 years warranty. Make: Crompton / Bajaj / Surya.
817 ELEC-3.10.23 80W 1 No 17825.00
818 ELEC-3.10.24 120W 1 No 20125.00
819 ELEC-3.10.25 150W 1 No 22425.00
Supply and Transportation of Induction Type suspended type
decorative high bay luminaire with polycarbonate refractor,
decorative integral die cast alluminium housing with heat
shrinks including Induction lamp and ballast etc., Complete
with 5 years warranty. Make: LVD RAES / Billion Light /
Fortune Art / Synergy Solutions.
820 ELEC-3.10.40 80W 1 No 15500.00
821 ELEC-3.10.41 120W 1 No 17500.00
822 ELEC-3.10.42 150W 1 No 19500.00
173
RATE FOR
SL.
NO.
2014-15
SECTION - 4
4.1 U.G. CABLES
823 ELEC-4.1.1 Supply of 4 Sqmm 2 Core XLPE insulated, 1100V grade 1 Mtr 92.00
armoured alluminium cable as per specification confirming to
IS:7098 (Part - I) of makes Torrent / Universal / CCI / Unicab.
IS:7098 (Part - I) of makes Polycab / KEI / RPG / Finolex /
Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab
IS:7098 (Part - I) of makes Finecab / Delton / Payal / Gemscab.
IS:7098 (Part - I) of makes Finecab / Delton / Payal /
Gemscab.
Gemscab.
Gemscab.
174
RATE FOR
SL.
NO.
2014-15
Gemscab.
Gemscab.
841 ELEC-4.1.19 Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade 1 Mtr 207.00
Gemscab.
Gemscab.
175
RATE FOR
SL.
NO.
2014-15
Gemscab.
Gemscab.
Gemscab.
Gemscab.
176
RATE FOR
SL.
NO.
2014-15
IS:7098 (Part - I) of makes Finecab / Delton / Payal.
IS:7098 (Part - I) of makes KEI / RPG / Paragon / V-Guard /
Fortune Art / Gloster.
11 KV H.T. XLPE CABLES
870 ELEC-4.1.48 Supply of 3 Core 11 KV 35 Sqmm HT XLPE (E) armoured Cable, 1 No 603.00
as per IS specification confirming to IS 7098/II/85 with latest
ammendments. Makes Torrent / Universal / CCI / Unicab.
ammendments.Makes Torrent / Universal / CCI / Unicab.
874 ELEC-4.1.52 Supply of 3 Core 11 KV 120 Sqmm HT XLPE (E) armoured 1 No 1104.00
Cable, as per IS specification confirming to IS 7098/II/85 with
latest ammendments.Makes Torrent / Universal / CCI /
177
RATE FOR
SL.
NO.
2014-15
Unicab.
Unicab.
Unicab.
4.2 CABLE GLANDS
877 ELEC-4.2.1 Supply and Fixing of Single compression brass cable glands for 1 No 327.00
3.5 core XLPE armoured cable for 185Sqmm with brass
washers complete.
washers complete.
washers complete.
washers complete.
881 ELEC-4.2.5 Supply and Fixing of single compression brass cable glands for 1 No 94.00
4 core XLPE armoured cable up to 16.0 Sq.mm with brass
washers complete.
882 ELEC-4.2.6 Supply and Fixing of single compression brass cable glands for 1 No 138.00
3.5 core XLPE armoured cable from 25 Sqmm to 50.0 Sq.mm
with brass washers complete.
3.5 core XLPE armoured cable from 70 Sqmm to 150.0 Sq.mm
with brass washers complete.
4.3 LUGS
884 ELEC-4.3.1 Supply and fixing of crimping type copper lugs confirming to 1 No 22.00
I.S specifications for cable upto 16 Sq.mm including nuts and
bolts with connections.
I.S specifications for cable of 25 Sq.mm including nuts and
178
RATE FOR
SL.
NO.
2014-15
896 ELEC-4.3.13 Supply and fixing of crimping type aluminium lugs confirming 1 No 12.00
to I.S specifications for cable upto 16 Sq.mm including nuts
and bolts with connections.
to I.S specifications for cable of 25 Sq.mm including nuts and
179
RATE FOR
SL.
NO.
2014-15
4.4 HEAT SHRINKABLE LT CABLE JOINTS
908 ELEC-4.4.1 Supply of heat shrinkable straight through joint Indoor / Out 1 No 1300.00
door for L.T. XLPE Armoured 1100V grade cable complete with
necessary accessories and suitable clamps including cost and
conveyance of materials complete for 10 to 16 Sqmm. Makes
Raychem / M Seal / Denson / Multy.
conveyance of materials complete for 25 to 50 Sqmm. Makes
conveyance of materials complete for 70 to 185 Sqmm.
Makes Raychem / M Seal / Denson / Multy.
911 ELEC-4.4.4 Supply and errecting heat shrinkable straight through joint 1 No 4000.00
Indoor / Out door for L.T. XLPE Armoured 1100V grade cable
complete with necessary accessories and suitable clamps
including cost and conveyance of materials and all labour
charges etc., complete for 240 to 300 Sqmm. Makes Raychem
/ M Seal / Denson / Multy.
conveyance of materials complete for 400 Sqmm. Makes:
3 CORE 11 KV HT CABLE STRAIGHT THROUGH JOINTS
913 ELEC-4.4.6 Providing and erecting heat shrinkable straight through joint 1 No 15070.00
out door / indoor for H.T, XLPE Insulated armoured cable
11000V grade complete with necessary accessories and
suitable clamps duly erected and connected to the supply for
the following multi core cables including cost and
conveyance of materials and all labour charges etc.,
complete for 16 to 35Sqmm.Makes Raychem / M Seal /
Denson / Multy.
180
RATE FOR
SL.
NO.
2014-15
Denson / Multy.
Denson / Multy.
HT END TERMINATION KITS
916 ELEC-4.4.9 Providing and errecting heat shrinkable indoor termination kit 1 No 8211.00
for 11 KV XLPE HT cable 3 core 70 Sqmm with necessary
materials etc., complete.Makes Raychem / M Seal / Denson /
Multy.
Multy.
Multy.
919 ELEC-4.4.12 Providing and errecting heat shrinkable outdoor termination 1 No 12452.00
kit for 11 KV XLPE HT cable 3 core 70 Sqmm with necessary
Multy.
Multy.
Multy.
4.5 DOUBLE WALLED CORRUGATED HDPE PIPE
922 ELEC-4.5.1 Supply and Transportation of Outer dia 50mm and Inner dia 1 Mtr 97.00
38mm double walled corrugated HDPE duct made as per
specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE
(Dura Guard) or its equivalent make.
181
RATE FOR
SL.
NO.
2014-15
103.50mm double walled corrugated HDPE duct made as per
4.6 CABLE TRAYS
930 ELEC-4.6.1 Supply and Installation of 600mm x 75mm x 2mm thick hot dip 1 Mtr 1300.00
GI perforated cable tray with cover along with required angle
supports, with coupler plates, Anchor bolts and nuts etc
complete and the tray should be fitted on the wall / Ceiling
etc. complete.
931 ELEC-4.6.2 Supply and Installation of 600mm x 50mm x 2mm thick GI 1 Mtr 960.00
perforated cable tray with cover along with required angle
etc. complete.
etc. complete.
etc. complete.
182
RATE FOR
SL.
NO.
2014-15
etc. complete.
Ladder type cable tray along with required angle supports,
with coupler plates, Anchor bolts and nuts etc complete and
the tray should be fitted on the wall / Ceiling etc. complete.
Note: Perforated cable trays provided without cover 30% may
be deducted from above rates.
SECTION - 5
5.1 FANS
938 ELEC-5.1.1 Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 1 No 1600.00
374 - 1979 and, with double ball bearings but without
Regulator of makes Crompton / Bajaj Kassels 50 / Usha atom
939 ELEC-5.1.2 Supply of 48" (1200mm) Sweep ISI mark as per IS 374 - 1979 1 No 1825.00
and 5 Star rated Ceiling Fan, with double ball bearings but
without Regulator of makes Crompton High Speed Plus / Bajaj
Electra 50 / Orient Energy Star / Havells ES 50.
940 ELEC-5.1.3 Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan 1 No 2020.00
without Regulator of makes Crompton High Speed Decora /
Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown /
Usha technix decorative
941 ELEC-5.1.4 Supply of 56" (1400mm) Sweep ISI mark Ceiling Fan as per IS 1 No 1675.00
374 - 1979 and, with double ball bearings but without
Regulator of makes Crompton / Bajaj Kassels 50 / Usha atom
942 ELEC-5.1.5 Supply of 56" (1400mm) Sweep 4/5 Star rated Ceiling Fan 1 No 2160.00
without Regulator of makes Crompton / Bajaj Elegance Star /
Usha / Havells.
943 ELEC-5.1.6 Supply of 16" (400mm) Wall mounted Fan of makes Crompton 1 No 2352.00
SDX Gold / Bajaj Elite / Havells Swing Premia gold / Usha /
Orient Wall 43.
944 ELEC-5.1.7 Supply of 16" (400mm) Pedestal Fan of makes Crompton SDX 1 No 2714.00
Gold / Bajaj Spectrum / Havells Swing Remote / Usha /
Orient.
945 ELEC-5.1.8 Supply of 18" (450mm) Wall mounting / Pedestal Air 1 No 6000.00
Circulators of makes Crompton / Havells Turbo Force / Orient
/ Almounard.
946 ELEC-5.1.9 Supply of 24" (600mm) Wall mounting / Pedestal Air 1 No 6600.00
Circulators of makes Crompton / Havells Turbo Force /
183
RATE FOR
SL.
NO.
2014-15
Almounard.
947 ELEC-5.1.10 Supply of 12" (300mm) Cabin fan of makes Crompton / 1 No 1550.00
Havells ciera / Orient AP12.
948 ELEC-5.1.11 Supply of 12" (300mm) Light duty exhaust fan with wire guard 1 No 1350.00
etc complete of makes Crompton / Bajaj Bahar WG / Havells
Ventil Air-DB / Orient hill air.
949 ELEC-5.1.12 Supply of 9" (225mm), Light duty exhaust fan with double ball 1 No 1265.00
bearing and wire guard etc complete of makes Crompton /
Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air.
950 ELEC-5.1.13 Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan 1 No 2645.00
with metallic blades with Mark of makes Crompton /
Almounard / Havells Turbo Force.
Almounard / Havells Turbo Force
Almounard / Havells Turbo Force
5.2 WATER HEATERS
953 ELEC-5.2.1 Supply, Transportation and fixing of storage / Pressure type 1 No 8866.00
Vertical / Horizontal 230/250V single phase 2000watts ISI
mark 5 Star rated water heater with SS tank and ABS plastic
body of 15 Ltrs capacity to withstand up to 6.5 bar of water
pressure including all standard accessories and dead weight
pressure reducing valve on out let side, including cost of 2 Nos
nylon / PVC / Metallic hose pipe, testing and all labour charges
etc., complete. Makes:makes Crompton model No. solarium
plus SWH 725, Class 1 rated or its equivalent make of Bajaj /
Venus / Racold / Usha.
954 ELEC-5.2.2 Supply, Transportation and fixing of storage / Pressure type 1 No 10438.00
Vertical / Horizontal 230/250V single phase 2000watts ISI
mark 5 Star rated water heater with SS tank and ABS plastic
body of 25 Ltrs capacity to withstand up to 6.5 bar of water
pressure including all standard accessories and dead weight
pressure reducing valve on out let side, including cost of 2 Nos
nylon / PVC / Metallic hose pipe, testing and all labour charges
etc., complete. Makes:makes Crompton model No. solarium
plus SWH 725, Class 1 rated or its equivalent make of Bajaj /
Venus / Racold / Usha.
5.3 ACCESSORIES FOR WATER HEATERS
955 ELEC-5.3.1 Heating element of 1.5 / 2.0 / 3.0 KW. 1 No 381.00
0 0
956 ELEC-5.3.2 Supply of thermostat with range 30 to 90 C.Adjustable and 1 No 263.00
suitable for 25 to 50 Ltrs. Capacity.
957 ELEC-5.3.3 Supply of pressure release valve for water heater of 15 to 50 1 No 263.00
Ltrs.capacity.
958 ELEC-5.3.4 Flexible Nylon / PVC Metallic hose pipe 1 No 158.00
5.4 ACCESSORIES FOR MOTORS
184
RATE FOR
SL.
NO.
2014-15
959 ELEC-5.4.1 Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. 1 No 780.00
With SS enclouser comprising of contactor with bi-metalic
relay with necessary push buttons, etc., complete. Makes:
Siemens / Crompton / L&T.
960 ELEC-5.4.2 Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. 1 No 1450.00
enclosed with no volt coil and overload protection with
necessary materials, etc., complete suitable upto 7.5.HP.
Makes: Siemens / Crompton / L&T.
961 ELEC-5.4.3 Motor Cover made with GI sheet of 18SWG for protection 1 No 60.00
from rain complete.
962 ELEC-5.4.4 Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. 1 No 2490.00
enclosed with no volt coil, overload protection and single
phase preventor , etc., complete suitable upto 10.0.HP.
Makes: Siemens / Crompton / L&T.
SINGLE PHASE SUBMERSIBLE MOTOR PUMP SETS
963 ELEC-5.4.5 Supply and Transportation of 0.75HP 8 Stage single phase ISI 1 No 14700.00
submersible motor pumpset suitable for 4" Bore well. Makes:
Kirloskar / Crompton / Texmo / CRI / KSB.
Aryan Varsha / Flowell / Waterman.
THREE PHASE SUBMERSIBLE MOTOR PUMP SETS.
185
RATE FOR
SL.
NO.
2014-15
973 ELEC-5.4.15 Supply and Transportation of 3.00HP 20-23 Stage Three phase 1 No 23625.00
ISI submersible motor pumpset suitable for 4" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB.
974 ELEC-5.4.16 Supply and Transportation of 3.00HP 20-23 Stage Three phase 1 No 22500.00
ISI submersible motor pumpset suitable for 4" Bore well.
Makes: Aryan Varsha / Flowell / Waterman.
975 ELEC-5.4.17 Supply and Transportation of 3.00HP 30- 33 Stage Three 1 No 28350.00
phase ISI submersible motor pumpset suitable for 4" Bore
well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB.
976 ELEC-5.4.18 Supply and Transportation of 3.00HP 30- 33 Stage Three 1 No 27000.00
well. Makes: Aryan Varsha / Flowell / Waterman.
977 ELEC-5.4.19 Supply and Transportation of 5.00HP 30 - 35 Stage Three 1 No 30975.00
well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB.
978 ELEC-5.4.20 Supply and Transportation of 5.00HP 30 - 35 Stage Three 1 No 29500.00
well. Makes: Aryan Varsha / Flowell / Waterman.
979 ELEC-5.4.21 Supply and Transportation of 5.00HP 40 Stage Three phase ISI 1 No 34125.00
SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR PUMP
SETS.
983 ELEC-5.4.25 Supply and Transportation of 1.00HP Single phase open well 1 No 11550.00
ISI submersible motor pumpset. Makes: Kirloskar / Crompton
/ Texmo / CRI / KSB.
ISI submersible motor pumpset. Makes: Aryan Varsha /
Flowell / Waterman.
Flowell / Waterman.
186
RATE FOR
SL.
NO.
2014-15
Flowell / Waterman.
THREE PHASE OPEN WELL SUBMERSIBLE PUMP SETS.
989 ELEC-5.4.31 Supply and Transportation of 3.00HP Three phase open well 1 No 17850.00
ISI submersible motor pumpset.(65x50) Makes: Kirloskar /
Crompton / Texmo / CRI / KSB.
ISI submersible motor pumpset.(65x50) Makes: Aryan Varsha /
Flowell / Waterman.
ISI submersible motor pumpset.(75x65) Makes: Aryan Varsha /
Flowell / Waterman.
ISI submersible motor pumpset.(100x75) Makes: Aryan Varsha
/ Flowell / Waterman.
ISI submersible motor pumpset.(100x75) Makes: Aryan Varsha
/ Flowell / Waterman.
SINGLE PHASE MONO BLOCK MOTOR PUMP SETS.
997 ELEC-5.4.39 Supply and Transportation of 0.5HP Single phase ISI Mono 1 No 5145.00
block CI body motor pumpset (25x25mm). Makes: Kirloskar /
block CI body motor pumpset (25x25mm). Makes: Aryan
Varsha / Flowell / Waterman.
187
RATE FOR
SL.
NO.
2014-15
1003 ELEC-5.4.45 Supply and Transportation of 1.02HP Single phase ISI self 1 No 12600.00
priming Mono block IP44 motor pumpset (40x40mm). Makes:
1004 ELEC-5.4.46 Supply and Transportation of 1.02HP Single phase ISI self 1 No 12000.00
1005 ELEC-5.4.47 Supply and Transportation of 2.00HP Three phase ISI self 1 No 14700.00
CONTROL PANEL BOARD FOR MOTORS
1011 ELEC-5.4.53 Supply and Transportation of control panel for single phase 1 No 4800.00
submersible motors up to 3 HP @ 220V 50Hz operating range
between 80 to 240V including supply and fixing of Direct - on -
Line LTLK / SIEMENS / CROMPTON make Volt meter and
Ammeter with starting and running capacitors assembled with
ISI mark contactors and fitted with Legrand make ISI mark
MCB etc., complete.
5.5 REPAIRS TO AIR CONDITIONERS
1012 ELEC-5.5.1 Supply, Fabrication of 1set MS bracket suitable for fixing out 1 Set 1000.00
door unit of split AC unit.
1013 ELEC-5.5.2 Providing 2 runs of Copper tubes for suction and liquid 1 Mtr 1000.00
between indoor and outdoor unit for split/Casseete Air-
Conditioner including foaming etc., complete.
1.3/4" x 3/8"
2. 5/8" x 1/4"
3. 1/2" x 1/4"
1014 ELEC-5.5.3 Supply of 1.0 / 1.5 Ton brand new Rotary type sealed 1 No 8150.00
compressor.
1015 ELEC-5.5.4 Supply of 2.0 Ton brand new Rotary type sealed compressor. 1 No 9250.00
1016 ELEC-5.5.5 Multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton Window 1 No 1590.00
A.C.Unit of makes Crompton / AU.
1017 ELEC-5.5.6 Fan motor capacitor 6 mfd by new capacitor for A.C machine 1 No 156.00
188
RATE FOR
SL.
NO.
2014-15
of 1.0 1.5 / Ton Capacity.
1018 ELEC-5.5.7 Thermostat switch suitable for 1.0 / 1.5 / 2.0 Ton A.C.Unit. 1 No 410.00
1019 ELEC-5.5.8 Starting capacitor of 80 to 120 mfd. by new approved make 1 No 180.00
capacitor suitable for compressor motor of 1.0 / 1.5 Ton A.C.
Unit.
1020 ELEC-5.5.9 Running capacitor of 36 mfd by new approved make capacitor 1 No 220.00
suitable for compressor motor of 1.0 / 1.5 Ton A.C.Unit.
1021 ELEC-5.5.10 Relay by approved make having pickup voltage 220 Volts and 1 No 225.00
dropout voltage 120 Volts suitable for 1.0 / 1.50 Ton A.C. Unit.
1022 ELEC-5.5.11 Filter and capillary tube including welding etc., complete for 1 No 485.00
1.0 / 1.5 / 2.0 Ton A.C.Unit.
1023 ELEC-5.5.12 Air filter suitable for 1.50 Ton Window A.C.Unit P.V.C. / 1 No 225.00
NYLON.
1024 ELEC-5.5.13 Air filter suitable for 1.50 Ton Split A.C.Unit P.V.C. / NYLON. 1 No 475.00
1025 ELEC-5.5.14 Rewiring the entire Window type 1.50 Ton A.C.unit with 2.5 1 No 325.00
Sq.mm Flexible copper cable and putting the same in working
conditions.
1026 ELEC-5.5.15 Overhauling and servicing the Window type 1.0 / 1.5 Ton A.C. 1 No 350.00
Machine by Cleaning the condensor cooling Coil etc., by
blower and oiling the Fan Motor and Cleaning all parts and
putting the machine in working condition.
1027 ELEC-5.5.16 Fan blade for 1.0 / 1.5 Ton A.C.Machine. 1 No 560.00
1028 ELEC-5.5.17 Grill of 1.0 / 1.5 ton A.C. Machine (for assembled Units). 1 No 427.00
1029 ELEC-5.5.18 Grill of 1.0 / 1.5 ton A.C. Machine of branded units. 1 No 1700.00
1030 ELEC-5.5.19 Rotary / Selector switch by new one. 1 No 115.00
1031 ELEC-5.5.20 Flushing the line, leak testing, leak stopping, vaccumming, 1 No 1500.00
dehydrating and charging the gas in the refrigeration system
for 1.0/ 1.5 /2.0 Ton Window A.C.Unit.
1032 ELEC-5.5.21 Flushing the line, leak testing, leak stopping, vaccumming, 1 No 2100.00
dehydrating and charging the gas in the refrigeration system
for 1.5 /2.0 Ton Split A.C.Unit.
1033 ELEC-5.5.22 Spray painting of Refrigerator using good quality paint after 1 No 720.00
scraping the surface etc.
1034 ELEC-5.5.23 New sealed compressor of 1/8 HP suitable for 165 to 185 Ltrs. 1 No 3100.00
Capacity Refrigerator.
1035 ELEC-5.5.24 Sealed compressor of 1/6 HP suitable for 285 / 310 Ltrs. 1 No 3750.00
Capacity Refrigerator.
1036 ELEC-5.5.25 Supply of fan motor by new 1/10 t0 1/12 H.P 1250 RPM fan 1 No 1590.00
motor for Water Cooler of 80-150 Ltrs.
1037 ELEC-5.5.26 Bush for fan motor of 80-150 Lts. 1 No 125.00
1038 ELEC-5.5.27 Resistance type regulator for ceiling fans 900/1200/1400mm 1 No 40.00
sweep complete erected on existing board.
1039 ELEC-5.5.28 Installation of Split Air Conditioners. 1 No 1500.00
1040 ELEC-5.5.29 Removing of existing Split Air Conditioners without damaging 1 No 400.00
to copper pipe.
1041 ELEC-5.5.30 Installation of Cassette type Split Air Conditioners. 1 No 3000.00
1042 ELEC-5.5.31 Installation of Tower type Split Air Conditioners. 1 No 2500.00
189
RATE FOR
SL.
NO.
2014-15
1043 ELEC-5.5.32 Supply, Fabrication of 1set MS bracket suitable for fixing out 1 Set 2000.00
door unit of Casseete AC unit.
Conditioner including foaming etc., complete.
1.7/8" x 1/2"
Conditioner including foaming etc., complete. 1. 1 1/8" x 5/8"
AIR CONDITIONERS
Supply of split AC unit with high wall mounted indoor unit
and outdoor condencing unit Hermetically sealed compressor
suitable for operation on 230V, 50Hz, 1Phase AC supply
capable of performing cooling dehumidifying air circulating
and filtering with cooling and condensing units with 5mts of
required size of copper piping duly insulated and 3 core
copper flexible chord of required length and cordless remote
control
A 1.5TR Split ACs
1046 ELEC-5.5.35 1.5 TR 3 Star capable of delivering 18000 BTU/hr and above 1 No 40811.00
with operating on refrigerant R-22 makes Mitsubishi SRK 19
CK-6
with operating on refrigerant R-22 makes Daikin FTE-M or N
Sereis / Carrier Novello / Blue Star 3HW18VB1 / Hitachi (Kazi+)
/ Voltas 183 PX-R.
with operating on refrigerant R-22 makes Mitsubishi
SRK20CKS-6 / Hitachi ACE FMS
with operating on refrigerant R-410A makes Daikin FT-M /
Carrier Estrella / Blue Star 5HW18DBF1.
B 1.8TR-2.1TR Split ACs
1050 ELEC-5.5.39 1.8 / 2.0 TR 3 Star capable of delivering 21600 BTU/hr and 1 No 49035.00
above with operating on refrigerant R-22 makes Carrier Dura
edgeplus / Daikin FTE-M or N Series / Blue Star 3HW24SVB1
with operating on refrigerant R-22 makes 'O' General.
with operating on refrigerant R-22 makes Carrier Kurve.
1053 ELEC-5.5.42 1.8 / 2.0 TR 5 Star capable of delivering 21600 BTU/hr and 1 No 57645.00
above with operating on refrigerant R-22 makes Mitsubishi
SRK25CKS-6 / Daikin FT-M Series
C Inverter Split AC Unts (Cooling Only)
Supply of INVERTER Model Cool type split AC unit with high
wall mounted Single Split indoor unit and outdoor condencing
unit Hermetically sealed compressor suitable for operation on
230V, 50Hz, 1Phase AC supply capable of performing Heat
190
RATE FOR
SL.
NO.
2014-15
cool dehumidi -fying air circulating and filtering with cooling
and condensing units duly insulated and 3 core copper flexible
chord of required length etc. complete including cordless
remote
1054 ELEC-5.5.43 1.5 TR capable of delivering 18000 BTU/hr and above with 1 No 57865.00
operating on refrigerant R-410 makes O General model No.
ASGA18JCC / Toshibha Model No. RAS-18N3KCV-IN
operating on refrigerant R-410 makes 'Daikin Model
No.FTKS50FVMA / Mitsubishi Model No. SRK18YL-S / Blue Star
Model No. HNHW18CBF.
operating on refrigerant R-410 makes Thosibha Model No.
RAS-22N3KCV-IN / Daikin Model No. FTKS60FVMA
operating on refrigerant R-410 makes 'O' General Model No.
ASGA24JCC / Blue Star Model No. HNHW22CBF
CASSETTE TYPE AC UNITS
Supply of Cassette type AC unit with ceiling mounted indoor
unit and outdoor condencing unit Hermetically sealed
compressor suitable for operation on AC supply capable of
performing cooling dehumidifying air circulating and filtering
with cooling and condensing units etc completewith Wireless
remote controller, but without refrigerent piping and cable.
1058 ELEC-5.5.47 Single Phase Makes: 2.2TR Daikin / 2.0TR 'O' Genral AUG25AB 1 No 82000.00
1059 ELEC-5.5.48 3.0TR Three Phase capable of delivering 36000 BTU/hr and 1 No 130090.00
above with operating on refrigerant R-22 makes Makes: 'O'
Genral
above with operating on refrigerant R-22 Makes: Daikin /
Carrier / Blue Star.
above with operating on refrigerant R-22 Makes: 'O' General
above with operating on refrigerant R-22 Makes: Daikin
1063 ELEC-5.5.52 3.5TR Three Phase Makes: Carrier / Blue Star 1 No 125000.00
above with operating on refrigerant R-22 Makes: Daikin / 'O'
Genral
above with operating on refrigerant R-22 Makes: Carrier /
Blue Star
Blue Star.
above with operating on refrigerant R-410 Makes: Toshibha /
O General (Inverter Technology)
191
RATE FOR
SL.
NO.
2014-15
Blue Star
above with operating on refrigerant R-410 Makes: Toshibha /
O General (Inverter Technology)
TOWER MODEL TYPE AC UNITS
Supply of Slim line / Tower Model/Verticool type split AC unit
with indoor unit and floor mounted outdoor condencing unit
Hermetically sealed Scroll compressor suitable for operation
on AC supply capable of performing cooling dehumidifying air
circulating and filtering with cooling and condensing units etc
complete with cordless remote control
above with operating on refrigerant R-22 Makes: Voltas
above with operating on refrigerant R-22 Makes: Blue Star
INVERTOR MODEL HEAT COOL SPLIT AC'S
Supply of INVERTER Model Heat Cool type split AC unit with
high wall mounted Single phase Split indoor unit and outdoor
condencing unit Hermetically sealed compressor suitable for
operation on 230V, 50Hz, 1Phase AC supply capable of
performing Heat cool dehumidi -fying air circulating and
filtering with cooling and condensing units duly insulated and
3 core copper flexible chord of required length etc. complete
with cordless remote control
1072 ELEC-5.5.61 ......do....with Cooling capacity 18000 BTU/Hr and above, 1 No 72975.00
Coffeient of performance 3.70 and above and R410A
refrigerent etc complete. Make : Toshiba model No. Indoor
Unit RAS-18N3KV2-E Outdoor Unit RAS-18N3AV2-E or its
equivalent model of 'O'General / Mitsubishi / Daikin.
1073 ELEC-5.5.62 .......do.....with Cooling capacity 22000 BTU/Hr and above, 1 No 78225.00
Coffeient of performance 3.40 and above and R410A
refrigerent etc complete. Make : Toshiba model No. Indoor
Unit RAS-B22N3KV2-E Outdoor Unit RAS-22N3AV2-E or its
equivalent model of 'O'General / Mitsubishi / Daikin
STABILIZERS
1074 ELEC-5.5.63 Supply of 0.5 KVA Stabilizer of make V-Guard / Real Guard / 1 No 990.00
Uni Stab / ITL.
1075 ELEC-5.5.64 Supply of 0.5 KVA Stabilizer of make Keeline / Soft Line / Capri. 1 No 810.00
Uni Stab / ITL.
Uni Stab / ITL.
192
RATE FOR
SL.
NO.
2014-15
Uni Stab / ITL.
Uni Stab / ITL.
5.6 REPAIRS TO MOTORS AND REWINDING, BEARINGS
1084 ELEC-5.6.1 Bearing of approved make for electric motor single phase / 3 1 No 179.00
phase AC upto 1 HP of all types.
phase AC upto 2 to 3 HP of all types.
phase AC upto 5 to 7.5 HP of all types.
phase AC upto 10 to 12.5 HP of all types.
1088 ELEC-5.6.5 Bearing of approved make for electic motor single phase / 3 1 No 489.00
phase AC upto 15 to 20 HP of all types.
1089 ELEC-5.6.6 Bearing of table / cabin / pedestal / ceiling / exhaust fan 1 No 84.00
complete with alignment of shaft and tested.
1090 ELEC-5.6.7 Bearing of bush / rubber / ring washers complete with 1 No 40.00
alignment of shaft and tested.
1091 ELEC-5.6.8 Capacitor of table / cabin / pedestal / ceiling / exhaust fan 1 No 38.00
complete.
1092 ELEC-5.6.9 EICHER model 11:10 with 100 H. P direct injestion 4 stroke 1 No 795069.00
engine with one spare wheel 3800 mm cabin high deck with
jangla (full body) (4 wheeler) for generator
6.1 SWAGED POLES / OCTOGONAL POLES, GARDEN POSTS AND
ACCESSORIES
1093 ELEC-6.1.1 Fabrication, supply and transportation of all sizes swaged 1 Kg 71.00
poles up to site confirming to IS 2713 / 1980 specifications.
The pole should be painted with primary coat of red oxide and
black bituminous paint up to ground level with base plate,
including cost of all materials etc., complete.(Rate per K. G)
1094 ELEC-6.1.2 Fabrication and Supply of M.S. Poles for garden posts with 'B' 1 Kg 65.00
class 60.25mm outer dia with base plate and suitable pole cap
including cost and conveyance of all material including fixing
of luminaire and labour charges etc., complete. (Rate per K. G)
1095 ELEC-6.1.3 Supply of different sizes of M. S. Pipe brackets (Rate per K.G) 1 Kg 65.00
1096 ELEC-6.1.4 Fabrication, Transportation and supply of hot-dip galvanized 1 No 10647.00
Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate
for shaft, IS 2062 for base plate with door opening
arrangement, including the supply of suitable boards with
bakelite sheet and MCB's as per IS specification suitable to
withstand the wind speed of 180 KMPH for 7.50 Mtrs height
Pole having dimensions Bottom 130 mm,. Top 70mm with
3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x
700 long 'J' bolts along with template of Makes: Bajaj /
Valmont / TRANSRAIL.
193
RATE FOR
SL.
NO.
2014-15
withstand the wind speed of 180 KMPH for 7.50 Mtrs height
3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x
700 long 'J' bolts along with template of Makes Surya /
LAASMA.
withstand the wind speed of 180 KMPH for 9 Mtrs height Pole
having dimensions Bottom 155 mm,. Top 70mm with 3mm
thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750
long 'J' bolts along with template of Makes: Bajaj / Valmont /
TRANSRAIL.
withstand the wind speed of 180 KMPH for 9 Mtrs height Pole
having dimensions Bottom 155 mm,. Top 70mm with 3mm
thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750
long 'J' bolts along with template of Makes: Surya / LAASMA.
withstand the wind speed of 180 KMPH for 10 Mtrs height
3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x
750 long 'J' bolts along with template of Makes Bajaj /
Valmont / TRANSRAIL.
withstand the wind speed of 180 KMPH for 10 Mtrs height
3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x
750 long 'J' bolts along with template of Makes: Surya /
LAASMA.
194
RATE FOR
SL.
NO.
2014-15
withstand the wind speed of 180 KMPH for 12 mtrs height
Pole having dimensions Bottom 200mm / 240mm, Top
100mm / 90mm with 4mm thick, base plate 320 x320 x20mm
and 4 Nos of M24 x 850 long 'J' bolts along with template of
Makes Bajaj / Valmont / TRANSRAIL.
withstand the wind speed of 180 KMPH for 12 mtrs height
Pole having dimensions Bottom 200mm / 240mm, Top
100mm / 90mm with 4mm thick, base plate 320 x320 x20mm
and 4 Nos of M24 x 850 long 'J' bolts along with template of
Makes: Surya / LAASMA.
1104 ELEC-6.1.12 Fabrication, Transportation and supply of 1.0 Mtr Length 1 No 1215.00
Single Arm Bracket made with MS galvanized 40mm / 50mm
dia Pipe.
1105 ELEC-6.1.13 Fabrication, Transportation and supply of 1.50 Mtr Length 1 No 1604.00
Single Arm Bracket made with MS galvanized 40mm / 50mm
dia Pipe.
1106 ELEC-6.1.14 Fabrication, Transportation and supply of 1 Mtr length Double 1 No 1400.00
Arm Bracket made with MS galvanized 40mm / 50mm dia
Pipe.
1107 ELEC-6.1.15 Fabrication, Transportation and supply of 1.50 Mtr length 1 No 2479.00
Double Arm Bracket made with MS galvanized 40mm / 50mm
dia Pipe.
1108 ELEC-6.1.16 Fabrication, Transportation and supply of of 1.5mtrs sword 4500.00
type decorative double arm bracket with dooms either sides
complete with all accessories with MS galvanized 40mm /
50mm dia Pipe.
1109 ELEC-6.1.17 Fabrication,transportation and supply of MS hot dip 1 No 18102.00
galvanized 9.0 Mtrs long octagonal poles with 3mm thick HT
steel plate with a bottom 200mm / 240mm dia and top
100mm / 90mm dia, base plate of size 290mm x 290mm x
16mm thick welded to bottom of pole, terminal box with door
size of 500mm x 100mm with all accessories connector and
fuse base and fixing arrangements for advertisements
holdings, foundation bolts with washers and nuts 4 sets with
all accessories as per the requirements at site and as per the
directions of field engineers during execution for finished item
of work. Makes: Bajaj / Valmont / TRANSRAIL.
195
RATE FOR
SL.
NO.
2014-15
steel plate with a bottom 200mm / 240mm dia and top
100mm / 90mm dia, base plate of size 290mm x 290mm x
16mm thick welded to bottom of pole, terminal box with door
size of 500mm x 100mm with all accessories connector and
fuse base and fixing arrangements for advertisements
holdings, foundation bolts with washers and nuts 4 sets with
all accessories as per the requirements at site and as per the
directions of field engineers during execution for finished item
of work. Makes: Surya / LAASMA.
1111 ELEC-6.1.19 Foundation and erection charges for 9 mtrs / 10 Mtrs long 1 No 4950.00
Octagonal/Conical pole duly erecting on base plate 290mm x
290mm x 16mm thick duly providing 4 Nos. foundation bolts
with nuts with providing of M20 c.c work vibrated concreting
mixing with necessary steel (15kgs) reinforcement as directed
by the field engineers during execution including all labour
charges and cost and conveyance of materials etc. complete.
1112 ELEC-6.1.20 Fabrication, transportation and supply of 12 Mtrs Polygon 1 No 103354.00
High Mast with single section of 3mm thick of Bottom 350mm
/ 360mm and Top 125mm / 100mm dia with BSEN - 10025
grade S 355 JO steel plate for shaft, IS 2062 for base plate,
having a base plate of size 520mm dia 16mm thick with its
accessories. Mast shall be in single section for 12 Mtrs and 2
sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized
and suiatble for wind velocity of 180 KMPH as per IS 875 part
3 including head frame, 2 point suspension system with steel
rope 6mm dia (7/19) construction double drum winch / power
tool operating speed of 900 RPM, and necessary cable trailer
connections and single speed motor with M 24 x 800 mm
foundation bolts of required quantity, suitable for 6 luminaires
with GLS type aviation twin lamp Makes: Bajaj / Valmont /
TRANSRAIL.
High Mast with single section of 3mm thick of Bottom 350mm
/ 360mm and Top 125mm / 100mm dia with BSEN - 10025
grade S 355 JO steel plate for shaft, IS 2062 for base plate,
having a base plate of size 520mm dia 16mm thick with its
accessories. Mast shall be in single section for 12 Mtrs and 2
sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized
and suiatble for wind velocity of 180 KMPH as per IS 875 part
3 including head frame, 2 point suspension system with steel
rope 6mm dia (7/19) construction double drum winch / power
tool operating speed of 900 RPM, and necessary cable trailer
connections and single speed motor with M 24 x 800 mm
foundation bolts of required quantity, suitable for 6 luminaires
with GLS type aviation twin lamp Makes: Surya / LAASMA.
196
RATE FOR
SL.
NO.
2014-15
High Mast with two sections of Bottom 4mm thick and Top
section with 3mm thick with GLS type aviation lamp of Bottom
350mm and Top 125mm dia with BSEN - 10025 grade S 355 JO
steel plate for shaft, IS 2062 for base plate, having a base plate
of size 560mm dia 25mm thick with its accessories. Mast shall
be in single section for 12 Mtrs and 2 sections for 16 and 20
Mtrs. Mast shall be hot dip galvanized and suiatble for wind
velocity of 180 KMPH as per IS 875 part 3 including head
frame, 2 point suspension system with steel rope 6mm dia
(7/19) construction double drum winch / power tool operating
speed of 900 RPM, and necessary cable trailer connections
and single speed motor with M 24 x 800 mm foundation bolts
of required quantity with GLS type aviation twin lamp Makes:
Bajaj / Valmont / TRANSRAIL.
Surya / LAASMA.
197
RATE FOR
SL.
NO.
2014-15
Surya / LAASMA.
section with 3mm thick of Bottom 400mm / 410mm and Top
150mm / 150mm dia with BSEN - 10025 grade S 355 JO steel
plate for shaft, IS 2062 for base plate, having a base plate of
size 570mm dia 25mm thick with its accessories. Mast shall be
in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs.
Mast shall be hot dip galvanized and suiatble for wind velocity
of 180 KMPH as per IS 875 part 3 including head frame, 2
point suspension system with steel rope 6mm dia (7/19)
construction double drum winch / power tool operating speed
of 900 RPM, and necessary cable trailer connections and
single speed motor with M 24 x 800 mm foundation bolts of
required quantity with GLS type aviation twin lamp of Makes:
section with 3mm thick of Bottom 400mm / 410mm and Top
150mm / 150mm dia with BSEN - 10025 grade S 355 JO steel
plate for shaft, IS 2062 for base plate, having a base plate of
size 570mm dia 25mm thick with its accessories. Mast shall be
in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs.
Mast shall be hot dip galvanized and suiatble for wind velocity
of 180 KMPH as per IS 875 part 3 including head frame, 2
point suspension system with steel rope 6mm dia (7/19)
construction double drum winch / power tool operating speed
of 900 RPM, and necessary cable trailer connections and
single speed motor with M 24 x 800 mm foundation bolts of
required quantity with GLS type aviation twin lamp of Makes:
Surya / LAASMA.
1120 ELEC-6.1.28 Supply and fixing of suitable feeder piller box made with 14 1 No 28884.00
SWG CRCA sheet including S & F of Legrand / Schnieder /
Siemens / ABB / L&T make 40A TP MCB, 6 Nos SP MCB's, bus
bars, 6 Sqmm 3 core copper cable for invidual light control,
contactor, suitable timer and connectors and provision for
energy meter etc., complete for finished item of work.
1121 ELEC-6.1.29 Supply and fixing of suitable feeder piller box made with 14 1 No 30473.00
SWG CRCA sheet including S & F of Legrand / Schnieder /
Siemens / ABB / L&T make 63A TP MCB, 8 Nos SP MCB's, bus
198
RATE FOR
SL.
NO.
2014-15
bars, 6 Sqmm 3 core copper cable for invidual light control,
contactor, suitable timer and connectors and provision for
energy meter etc., complete for finished item of work.
1122 ELEC-6.1.30 Earth work exacavation with a approximate quantity of 4.0 1 No 28073.00
Cum for errection of 12 Mtrs high mast and refilling with a
quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade
concrete and (80 Kgs) reinforced steel of 12mm / 10mm /
8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with
cost and conveyance of all above materials including labour
charges for errection of High Mast and Carraige etc complete.
steel plate with a bottom 155mm dia and top 75mm dia, base
plate of size 260mmx260mmx16mm thick welded to bottom
of pole, terminal box with door size of 500mm x 100mm with
all accessories connector and fuse base and a fixing
arrangements for advertisements holdings, foundation bolts
with washers and nuts 4 sets. including S&F of 1.5mtrs sword
type decorative single arm bracket with dooms either sides
complete with all accessories as per the requirements at site
and as per the directions of field engineers during execution
for finished item of work. Makes: Bajaj / Valmont /
TRANSRAIL.
of pole, terminal box with door size of 500mm x 100mm with
with washers and nuts 4 sets. including S&F of 1.5mtrs sword
type decorative single arm bracket with dooms either sides
complete with all accessories as per the requirements at site
and as per the directions of field engineers during execution
199
RATE FOR
SL.
NO.
2014-15
for finished item of work. Makes: Surya / LAASMA.
galvanized 9.0 Mtrs long Conical poles with 3mm thick HT
of pole, terminal box with door size of 500mmx100mm with
with washers and nuts 4 sets. including S&F of 1.0 mtrs C type
decorative single arm with painted bracket with dooms either
sides complete with all accessories as per the requirements at
site and as per the directions of field engineers during
execution for finished item of work. Makes Bajaj / Valmont /
TRANSRAIL.
decorative single arm with painted bracket with dooms either
sides complete with all accessories as per the requirements at
site and as per the directions of field engineers during
execution for finished item of work. Makes: Surya / LAASMA.
decorative Double arm with painted bracket with dooms
either sides complete with all accessories as per the
requirements at site and as per the directions of field
engineers during execution for finished item of work. Makes:
decorative Double arm with painted bracket with dooms
either sides complete with all accessories as per the
200
RATE FOR
SL.
NO.
2014-15
requirements at site and as per the directions of field
engineers during execution for finished item of work. Makes:
Surya / LAASMA.
Supply of following sizes thermo plastic pole boxes IP 65
protection Make : Hensel / Sintex
1131 ELEC-6.1.39 300X150X170 1220.00
1132 ELEC-6.1.40 300X300X170 1750.00
1133 ELEC-6.1.41 300X450X170 2385.00
1134 ELEC-6.1.42 300X600X170 2830.00
1134 ELEC-6.1.43 Erection charges for 7.50 Mts long Octagonal pole on bridge 1 No 3200.00
kerb portion (R.C.C). with 4 Nos 8" Anchor bolts/
M20xsuitable "J" type bolts etc duly drilling holes to RCC slab
and with V.C.C. M.15 concrete for base concreting up to a
height of 8" with necessary Reinforcement work etc.
including cost and con veyance of all material and all labour
charges etc. complete as directed by the department officers.
Supply and transportation of following glass reinforced
polymer (GRP) composite type Conical pole with single arm
bracket of length 1Mtr and internal junction box including
labour charges etc., complete. Makes: Bajaj / Kemrock /
Sumip.
1135 ELEC-6.1.44 3.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV 1 No 8908.00
thickness 6mm and to withstand maximum wind velocity
155Km/Hr
155Km/Hr
155Km/Hr
155Km/Hr
155Km/Hr
Supply and transportation of base bracket suitable for glass
reinforced polymer (GRP) composite type pole including
labour charges etc., complete. Makes: Bajaj / Kemrock /
Sumip.
1140 ELEC-6.1.49 For 3.00 Mtrs Pole 1 No 1650.00
6.2 CONTROL PANEL BOARD
1145 ELEC-6.2.1 Fabrication and erection of 14SWG CRCA sheet steel enclosure 1 sq. 2.60
for power control cubicle panel / boxes etc., including cutting, inch
201
RATE FOR
SL.
NO.
2014-15
bending drilling, welding and reveting etc., complete with
cleaning with 7 tank process and painting with powder coating
including cost and conveyance of all materials and labour
charges.
1146 ELEC-6.2.2 Fabrication and erection of 16 SWG CRCA sheet steel 1 sq. 2.40
enclosure for power control cubicle panel / boxes etc., inch
including cutting, bending drilling, welding and reveting etc.,
complete with cleaning with 7 tank process and painting with
powder coating including cost and conveyance of all materials
and labour charges.
1147 ELEC-6.2.3 Fabrication and erection of 18SWG CRCA sheet steel enclosure 1 sq. 2.10
for power control cubicle panel / boxes etc., including cutting, inch
bending drilling, welding and reveting etc., complete with
cleaning with 7 tank process and painting with powder coating
including cost and conveyance of all materials and labour
charges.
6.3 METERING EQUIPMENT
1148 ELEC-6.3.1 Supply and erection of 0-415V volt Digital meter on exisiting 1 No 2500.00
box / panel board including connections etc., complete.
CONZERVE / ELMEASURE / LEGRAND / MECO / HPL MAKE.
1149 ELEC-6.3.2 Supply and erection of 0-415V volt Analog meter on exisiting 1 No 450.00
1150 ELEC-6.3.3 Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital 1 No 2500.00
Ammeter of size 96x96mm on existing box / panel board
including connections etc., complete. CONZERVE /
ELMEASURE / LEGRAND / MECO / HPL MAKE.
1151 ELEC-6.3.4 Supply and erection of 0-100 / 200 / 400 / 600 /1000 Analog 1 No 450.00
Ammeter of size 96x96mm on existing box / panel board
including connections etc., complete. CONZERVE /
1152 ELEC-6.3.5 Supply and erection of Digital frequency meter on existing 1 No 4556.00
1153 ELEC-6.3.6 Supply and erection of Digital power factor meter, 3 phase, 4 1 No 2700.00
wire balanced or unabalanced load 5A, 415V of size 96x96mm
on existing box / panel board including connections etc.,
complete. CONZERVE / ELMEASURE / LEGRAND / MECO / HPL
MAKE.
1154 ELEC-6.3.7 Supply and erection of L.T. 3phase Digital multifunction 1 No 10023.00
energy meter with 3 lines LCD display for measuring all the
parameters (voltage / Current / Power / frequency / power
factor / kw / kwh / KVAR/ KVARH/) on existing box panel
board including connections etc., complete. CONZERVE /
1155 ELEC-6.3.8 Supply and erection of selector switch for voltmeter / 1 No 175.00
Ammeter on the existing box / panel including connections
etc., complete. L&T / C&S / SALZAR / HPL MAKE.
202
RATE FOR
SL.
NO.
2014-15
1156 ELEC-6.3.9 Supply and erection of LED indicator lamps on the existing box 1 No 135.00
/ panel board. L&T / C&S / SALZAR / HPL MAKE.
1157 ELEC-6.3.10 Supply and erection of LT current transformer with bar 1 No 450.00
primary 100/5A to 1000 / 5A ratio in the existing box / panel
including connections etc., complete. KAPPA MAKE.
1158 ELEC-6.3.11 Supply and fixing of single phase Electronic energy 1 No 1050.00
Meter,240V AC,50 HZ as per IS13010 up to 40A range with
200% over load capacity complete with connections etc.,
complete on the existing board. CONZERVE / ELMEASURE /
MECO / HPL / HAVELLS MAKE.
1159 ELEC-6.3.12 Supply and fixing of three phase Electronic energy Meter, 1 No 3037.00
415V AC,50 HZ as per IS13010 up to 40A range with 200% over
load capacity complete with connections etc., complete on
the existing board. CONZERVE / ELMEASURE / MECO / HPL /
HAVELLS MAKE.
1160 ELEC-6.3.13 Supply and fixing of 8 Stage APFC Relay with connection etc 1 No 13600.00
complete.(L&T / Siemens / EPCOS / Schneider / Elmeasure)
1161 ELEC-6.3.14 Supply and fixing of 14 Stage APFC Relay with connection etc 1 No 16900.00
complete.(L&T / Siemens / EPCOS / Schneider / Elmeasure)
6.4 SUB STATION EQUIPMENT and TRANSFORMERS
1162 ELEC-6.4.1 Carryout routine maintenance, servicing and testing of 630A 1 No 1998.00
to 1000A L.T.ACB by cleaning fixed contacts, moving contacts
and arcchutes including servicing and putting the ACB in
perfect working condition after detting all relay and ON, OFF
mechanism etc done with only manufacturing companies
1163 ELEC-6.4.2 Carryout routine maintenance and servicing of LT.Cubical 1 No 2500.00
pannel board having approximately 15 to 22 Nos of switches
cleaning with power brower and servicing the contacts,
tightning the connection of incoming and outgoing cables, and
clicking the operating machanism for smooth functioning of
switches and putting them in smooth working condition.
1164 ELEC-6.4.3 Routine maintenance of transformer in operation covering 1 No 4350.00
insulation resistance oil, break down strength. Reconditioning
/ replacement of silicazel, cleaning of transformer and topping
upto oil level if required (extra cost will be paid for oil).
1165 ELEC-6.4.4 Testing of Transformer oil for dielectric breakdown strength. 1 No 500.00
1166 ELEC-6.4.5 Removing the existing transformer from the plinth / Pole and 1 No 2500.00
refixing the standby transformer of following capacity
including connections etc., complete.- Upto 315 KVA
1167 ELEC-6.4.6 Removing the existing transformer from the plinth / Pole and 1 No 3500.00
refixing the standby transformer of following capacity
including connections etc., complete. -500 / 1000 KVA
1168 ELEC-6.4.7 Replacing old and unserviceable gasket of top cover plate of 1 No 750.00
transformer having following capacity. -Upto 315 KVA
1169 ELEC-6.4.8 Replacing old and unserviceable gasket of top cover plate of 1 No 1050.00
transformer having following capacity. -500 / 1000 KVA
203
RATE FOR
SL.
NO.
2014-15
1170 ELEC-6.4.9 Replacing old and unserviceable gasket of H. T bushing for 1 No 300.00
the following Transformer capacity. -Upto 315 KVA
1171 ELEC-6.4.10 Replacing old and unserviceable gasket of H. T bushing for 1 No 550.00
the following Transformer capacity. -500 / 1000 KVA
1172 ELEC-6.4.11 Replacing old and unserviceable gasket of L.T bushing for the 1 No 700.00
following transformer capacity. Upto 315 KVA
1173 ELEC-6.4.12 Replacing old and unserviceable gasket of L.T bushing for the 1 No 1450.00
following transformer capacity. 500 / 1000 KVA
1174 ELEC-6.4.13 Replacement the H/T / L. T burntout winding coils of 1 Kg 590.00
distribution transformer including rewinding, varnishing and
vaccuming etc.,duly retaining the removed burnt winding coils
by the Contractor / Firm- For copper coils
1175 ELEC-6.4.14 Replacement the H/T / L. T burntout winding coils of 1 Kg 390.00
distribution transformer including rewinding, varnishing and
vaccuming etc.,duly retaining the removed burnt winding coils
by the Contractor / Firm - For aluminium coils
1176 ELEC-6.4.15 Insulating HT / LT copper / aluminium coils for Transformers. 1 No 300.00
1177 ELEC-6.4.16 Painting with 2 coats Zinchromate red oxide duly scraping 1 No 3000.00
existing paint followed by 2 coats of hammerton grey paint
etc., complete. -Upto 500 KVA
1178 ELEC-6.4.17 Painting with 2 coats Zinchromate red oxide duly scraping 1 No 4000.00
existing paint followed by 2 coats of hammerton grey paint
etc., complete. - 630 / 1000 KVA
1179 ELEC-6.4.18 Replacing H.T bushing for distribution Transformer by new 1 No 350.00
one.
1180 ELEC-6.4.19 Replacing H.T bushing metal parts for distribution Transformer 1 No 380.00
by new one.
1181 ELEC-6.4.20 Replacing L.T bushing for distribution Transformer by new 1 No 165.00
one for the following capacities. - Upto 315 KVA
1182 ELEC-6.4.21 Replacing L.T bushing for distribution Transformer by new 1 No 175.00
one for the following capacities.- 500 / 1000 KVA
1183 ELEC-6.4.22 Replacing L.T bushing metal parts for distribution Transformer 1 No 300.00
by new one for the following capacities. -100 KVA
by new one for the following capacities. -250 / 315 KVA
1187 ELEC-6.4.26 Drying the repaired transformer with appropriate heat / air of 1 No 3000.00
following capacity of transformers. -Upto 315 KVA
1188 ELEC-6.4.27 Drying the repaired transformer with appropriate heat / air of 1 No 4200.00
following capacity of transformers. -500 / 1000KVA
1189 ELEC-6.4.28 Loading and Unloadng of transformer from site to Workshop 1 No 4500.00
or vice verse. -Upto 500 KVA
1190 ELEC-6.4.29 Loading and Unloaidng of transformer from site to Workshop 1 No 6800.00
or vice verse. -630 / 1000 KVA
204
RATE FOR
SL.
NO.
2014-15
1191 ELEC-6.4.30 Transformer oild tested as per IS-335 - 1972 (per Ltr) 1 Ltr 90.00
1192 ELEC-6.4.31 Filteration of transformer oil as per ISS specifications filters to 1 Ltr 8.00
die electric strength above 40 K. V at site. (per Ltr)
1193 ELEC-6.4.32 Filteration of transformer oil as per ISS specifications filters to 1 Ltr 5.00
die electric strength above 40 K. V at workshop (per Ltr)
1194 ELEC-6.4.33 Supply of MPP type heavy duty capacitor of operating voltage 1 KVAR 330.00
not less than 480V and losses not more than 0.35W per KVAR
and inrush current withstand capability 300 times the rated
current. Makes:L&T/Siemens/Schneider/Epcos.
Supply, transportation and delivery at site of 3 Phase, 50 Hz,
oil immersed and naturally cooled, outdoor / Indoor type
copper wound transformer designed and manufactured as per
IS 2026-1977 and 1st filling of oil as per IS 335 of 1993,
connected delta on primary side and Star on secondary side
with additional neutral brought out on load side, 1100V /
(433V / 415V) with HV tapping + or - 2.5% contineously rated
for full load and temporature rise not exceeding 50°C in oil
and 55°C rise by th resistance of the winding after contineous
run on full load rating complete with the following standard
mountings. Makes: Kirloskar / Vijay Electricals / PETE /
Esennar
(Note:Other than these makes / brands mentioned rate may
be allowed as approved by AP Electricity Board).
1. Rated KVA : ........KVA
2. Service: Outdoor / Indoor
3. Mounting : Plinth.
4. Copper wound : Double.
5. Type : Core.
6. Cooling : ONAN
7. Temp . Rise : 55⁰C.
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 415 / 433V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary voltage variation :
+7.5% to - 7.5% in steps of 2.5%,
19. Terminal arrangement.
a. HV: Bare Busings / Cable end box
b. LV : Cable box
20. LV : One separate terminal for earthing.
20. No load losses (Watts): ..........As per IS specification
21. Load losses (Watts): ............As per IS specification
22. Impedance(Z%) : .............As per IS specification
205
RATE FOR
SL.
NO.
2014-15
21. Fittings & Accessories. a. Rating and terminal marking
plate b. Earthing terminals c. Lifting Lugs d.
Conservator with drain plug. e. Oil level Indicator f.
Dehydrating silicagel breather g. Air release device h.
Drain cum filter wall i. Explosion vent with diaphragm j.
Radiators (Attachable) k. Seperate neutral bushing l.
Uni directional flat rollers.
1195 ELEC-6.4.34 ... do……. 63 KVA Copper Wound Transformer 165000.00
Supply, transportation and delivery at site of 3 Phase, 50 Hz,
Dry type, Indoor type copper wound transformer designed
and manufactured as per IS 2026-1977 and IS 11171-
1985,connected delta on primary side and Star on secondary
side with additional neutral brought out on load side, 1100V /
(433V / 415V) with HV tapping + or - 2.5% temporature rise by
the resistance 90⁰C. complete with the following standard
mountings.Makes: Kirloskar / Vijay Electricals / PETE / Esennar
(Note:Other than these makes / brands mentioned rate may
be allowed as approved by AP Electricity Board).
1. Rated KVA : ........KVA (Cast Resin)
2. Service: Indoor
3. Mounting : Floor.
4. Copper wound : Double.
5. Type of cooling : ANAN.
6. Insulation Class : Class F
7. Temparature rise by resistance : 90⁰C
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 433V / 415V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary voltage variation :
+5.0% to - 10.0% in steps of 2.5% through links.
19. Terminal arrangement.
a. HV: Cable end box
b. LV : Cable end box
20. No load losses (Watts): ........... As per IS specifications
21. Load losses (Watts): ..............As per IS specifications
22. Impedance(Z%) : ............As per IS specifications
206
RATE FOR
SL.
NO.
2014-15
21. Fittings & Accessories.
a. Rating and terminal marking plate
b. Earthing terminals
c. Lifting Lugs
d. Winding temporature Indicator
e. Seperate neutral bushing
f. Uni directional flat rollers.
6.5 LIGHTENING PROTECTIVE SYSTEM
1205 ELEC-6.5.1 Supply and erecting approved make 11KV, 5KA metal oxide 1 No 1500.00
lightning arrestors suitable for 11 KV supply with necessary
materials on existing cross arm.
1206 ELEC-6.5.2 Supply and erecting porcelain disc type insulator suitable for 1 No 600.00
11KV line with suitable hardware on existing cross arms.
1207 ELEC-6.5.3 Supply and erecting porcelain pin type insulator suitable for 1 No 300.00
1208 ELEC-6.5.4 Supply and erecting porcelain post type insulator suitable for 1 No 675.00
1209 ELEC-6.5.5 Supply and erecting porcelain pin/shackle type insulator 1 No 90.00
suitable for L. T.
1210 ELEC-6.5.6 Supply and fixing of lightning protective system conforming to 1 No 600.00
IS : 2309 with all standard accessories such as metal globe
finials on the top of the builiding with 25.4 mm dia 3.0mtrs.
Length of 'B' class G.I pipe etc., complete without down
conductors and earthing.
1211 ELEC-6.5.7 Approved made 11KV, 400A A.B switch with all standard 1 No 7000.00
accessories etc., complete with cost and conveyance of all
materials.
1212 ELEC-6.5.8 Approved made 11KV, 200A A.B switch with all standard 1 No 6100.00
accessories etc., complete with cost and conveyance of all
materials.
1213 ELEC-6.5.9 Approved made 11KV, 200A A.B switch (tilting) with all 1 No 5900.00
standard accessories etc., complete with cost and conveyance
of all materials.
1214 ELEC-6.5.10 11KV, H.G fuse set including all standard accessories etc., 1 No 4000.00
complete with cost and conveyance of all materials.
1215 ELEC-6.5.11 Supply of 7/3.15 AAA C all Alluminium annealed conductor 1 Km 25013.00
Rabit.
1216 ELEC-6.5.12 Supply of 7/2.50 AAA C all Alluminium annealed conductor 1 Km 15383.00
Weasel.
1217 ELEC-6.5.13 Supply of 9.1 Mtr PSCC Pole 280 Kg Working load. 1 No 3129.00
1218 ELEC-6.5.14 Supply of 8.0 Mtr PSCC Pole 140 Kg Working load. 1 No 1665.00
1219 ELEC-6.5.15 Supply of 175 x 85 mm / 150 x 75 mm RS Joist. 1 Kg 50.00
1220 ELEC-6.5.16 Supply and installation of NIMBUS CPT-3/NLP 2200 / 1 No 128000.00
207
RATE FOR
SL.
NO.
2014-15
FOREND(ESE-EU) Advanced lighting protection with capturing
head of 135 - 210mm diameter, 205 -580mm height and 4.60 -
4.940 kgs , and having Rod length 760mm, weight 1.795 kgs
with stainless steel rod, working on the principle of (ESE) Early
Streamer Emission technology, having a coverage radius of
79mts when mounted on 10 - 15 mts height of existing lattice
tower giving level 1 protection and anticipation emission time
of 60 micro seconds/72 micro seconds. The NIMBUS is
manufactured according to standard NFC 17 102 and UNE
21186-96 including functional integrity etc Complete. Make :
NIMBUS / FOREND or equivalent
1221 ELEC-6.5.17 Installation and commissioning of NIMBUS / FOREND or 1 No 31200.00
equivalent advanced lighting protection systems which
includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of Earth Electrodes
6. Interconnection between the Electrodes
7. Termination of down conductor to earth bus etc complete
1222 ELEC-6.5.18 Supply of electro-Mechanical counter (Make: CIRPROTEC / 1 Pt 16000.00
INDALAC/INGESCO)
1223 ELEC-6.5.19 Providing earth electrode of low carbon steel rod of 17mm 1 Pt 9600.00
dia coated with 250 microns thick copper 3mtr long with
clamps and 2 bags of LORESCO ZEROLITE back fill compound
etc complete (As per drawings enclosed)
1224 ELEC-6.5.20 Supply of down conductor of 1x70sqmm single core PVC 1 Mtr 410.00
insulated unarmoured copper conductor cable of ISI mark
(Make: Polycab / Havells / RPG / RR Kabel)
7.1 NET WORKING
1225 ELEC-7.1.1 Supply of 2 Pair, 0.5mm telephone copper wire of makes 100 Mtrs 1010.00
Finolex / Delton / Surabi / Polycab
1226 ELEC-7.1.2 Supply of 5 Pair telephone copper wire of makes Finolex / 100 Mtrs 2800.00
Delton / Surabi / Polycab /
1227 ELEC-7.1.3 Supply of LAN Cable cat - 6 UTP cable of makes D Link / AMP / 100 Mtrs 2580.00
Molex / Legrand / Krone.
1229 ELEC-7.1.4 Supply of Cat 6 RJ-45 information outlets including duel face 1 No 340.00
plate of makes D Link / AMP / Molex / Legrand / Krone.
1230 ELEC-7.1.5 Supply of 24 Port switches of makes D link / CISCO / Net Gear 1 No 5200.00
/ HP.
1231 ELEC-7.1.6 Supply of 8 Port switches of makes D link / CISCO / Net Gear / 1 No 1235.00
HP.
1232 ELEC-7.1.7 Supply of 3200 access point of makes D link / CISCO / Net Gear 1 No 12500.00
/ HP.
1233 ELEC-7.1.8 Supply of 7 feet length moulded patch cor0d of makes D Link / 1 No 220.00
AMP / Molex / Legrand / Krone.
208
RATE FOR
SL.
NO.
2014-15
1234 ELEC-7.1.9 Supply of 3 feet length moulded patch cord of makes D Link / 1 No 200.00
1235 ELEC-7.1.10 Supply of 24 port patch panels of makes D Link / AMP / Molex 1 No 6500.00
/ Legrand / Krone.
1236 ELEC-7.1.11 Supply of 100 pair MDF loaded with 2/10 Modular of Krone 1 No 3680.00
make or its equivalent.
1237 ELEC-7.1.12 Supply of 100 Pair raiser cable for telephone makes Finolex / 1 Mtr 387.00
Delton / Surabi / Polycab.
1238 ELEC-7.1.13 Supply of 10 Pair telephone Copper wire of makes Finolex / 1 Mtr 40.00
Delton / Surabi / Polycab
Delton / Surabi / Polycab
Delton / Surabi / Polycab.
1241 ELEC-7.1.16 Supply of 10 pair Telephone distribution box with back mount 1 No 650.00
frame, krone connector, powder coated metal body with lock
and key arrangement.
1244 ELEC-7.1.19 Supply of 200 pair Telephone distribution box with back 1 No 7900.00
mount frame, krone connector, powder coated metal body
with lock and key arrangement.
1245 ELEC-7.1.20 Supply of 6U floor mounting net work rack with power spike 1 No 4700.00
including all accessories of make HCL / Vall.
1251 ELEC-7.1.26 Supply of 6 Core (Indoor / Out door), Single mode armourd, 1 Mtr 75.00
Optic fibre cable of makes D Link / AMP / Molex / Legrand /
Krone.
1252 ELEC-7.1.27 Supply of 12 Core (Indoor / Out door), Single mode armourd, 1 Mtr 105.00
Optic fibre cable of makes D Link / AMP / Molex / Legrand /
Krone.
1253 ELEC-7.1.28 Supply of 6 port fibre distribution unit. (FDU / LIU) loaded with 1 No 7500.00
couplers etc complete of makes D Link / AMP / Molex /
Legrand / Krone.
209
RATE FOR
SL.
NO.
2014-15
1254 ELEC-7.1.29 Supply of 12 port fibre distribution unit. (FDU / LIU) loaded 1 No 9500.00
with couplers etc complete of makes D Link / AMP / Molex /
Legrand / Krone.
1255 ELEC-7.1.30 Supply of Subscriber connector (SC) to SC / LC patch card of 1 1 No 2000.00
Mtr length of makes D Link / AMP / Molex / Legrand / Krone.
1256 ELEC-7.1.31 Supply of Pigtails for fibre core connectivity of makes D Link / 1 No 350.00
1257 ELEC-7.1.32 Supply of Cat 6 RJ-45 information outlets including Single face 1 No 250.00
plate of makes D Link / AMP / Molex / Legrand / Krone.
RACEWAYS AND JUNCTION BOXES
1258 ELEC-7.1.33 Supply of 100mm x 38mm G I Raceways of 2mm thick with top 1 Mtr 460.00
cover and required hard ware etc complete.
1264 ELEC-7.1.39 Supply of 172mm x 52mm G.I. Junction box of 2mm thick for 1 No 340.00
direct acces to cables at the inter section of Raceways.
8.1 MISSILLANEOUS ITEMS
1267 ELEC-8.1.1 Supply of single fancy bracket with glass shade best Indian 1 No 215.00
make
1268 ELEC-8.1.2 Supply of double fancy bracket with glass shade best Indian 1 No 385.00
make
1269 ELEC-8.1.3 Supply of 10" ceiling fittings with glass doom best Indian 1 No 193.00
make
1270 ELEC-8.1.4 Supply of Bulk head fitting with cast aluminium enamel 1 No 396.00
painted body with water tight, clear glass with wire guard
hinged with lock and key arrangements etc., complete of
makes Bajaj / Crompton / Surya.
1271 ELEC-8.1.5 TW Seperators / Gutties 100 Nos 165.00
1272 ELEC-8.1.6 Rawl Plugs 100 Nos 28.00
1273 ELEC-8.1.7 U Nails 100 Nos 44.00
1274 ELEC-8.1.8 Alluminium Link Clips 144 Nos 55.00
1275 ELEC-8.1.9 50 mm G.I.Nut and Bolts. 1 Set 13.00
1276 ELEC-8.1.10 63 to 100 mm G.I.Nut and Bolts. 1 Set 24.00
1277 ELEC-8.1.11 50 mm 0 Gauge Nails 1 Doz 44.00
1278 ELEC-8.1.12 63 to 100 mm 0 Gauge Nails 1 Doz 73.00
210
RATE FOR
SL.
NO.
2014-15
1279 ELEC-8.1.13 Hard Coke 1 Kg 9.00
1280 ELEC-8.1.14 Salt 1 Kg 4.00
1281 ELEC-8.1.15 PVC Cleats 2 Way 100 Nos 330.00
1282 ELEC-8.1.16 PVC Cleats 4 Way 100 Nos 440.00
1283 ELEC-8.1.17 Binding Wire 1 Kg 61.00
1284 ELEC-8.1.18 PVC / Cotton Insulation tape Role ( 10 Mtrs) 1 No 17.00
1285 ELEC-8.1.19 C.I.Knob 1 No 13.00
1286 ELEC-8.1.20 Stay tight set (Jum bracket 300 mm) 1 Pair 303.00
1287 ELEC-8.1.21 Stay clamp with bolts and Nuts) 1 Set 194.00
1288 ELEC-8.1.22 L.T.Guy insulator 1 No 51.00
1289 ELEC-8.1.23 12 / 15 MS plain rod fan hook 1 No 22.00
1290 ELEC-8.1.24 19 / 20 mm Steel tube fan down rod 1 Mtr 66.00
1291 ELEC-8.1.25 Consealed box PVC / MS with hook for fan 1 No 88.00
1292 ELEC-8.1.26 Coil Earthing 1 No 66.00
1293 ELEC-8.1.27 Cable root Indicators 1 No 83.00
1294 ELEC-8.1.28 40 mm x 40 mm x 6 mm angle iron with I bolt. 1 Set 242.00
1295 ELEC-8.1.29 Mild Steel Items 1 Kg 61.00
1296 ELEC-8.1.30 Acrylic Cover of size 4" x 7" for night lamps. 1 No 17.00
1297 ELEC-8.1.31 TW / PVC Round Blocks 1 No 7.00
1298 ELEC-8.1.32 G.I.Funnel with Mesh 1/2" x 4" 1 No 83.00
1299 ELEC-8.1.33 Asbestos Sheet 1 Sqft 22.00
1300 ELEC-8.1.34 First Aid box 18" x 12" x 8" 1 No 1100.00
1301 ELEC-8.1.35 11 KV/22 KV Hand gloves 1 No 154.00
1302 ELEC-8.1.36 Copper plate / Copper strip (Per K.G) 1 Kg 605.00
1303 ELEC-8.1.37 No. 8/10 SWG copper wire (per K.G) 1 Kg 605.00
1304 ELEC-8.1.38 PVC Insulated copper winding wire of fine quality (per K. G) 1 Kg 726.00
1305 ELEC-8.1.39 No. 14 SWG copper wire (per K. G) 1 Kg 605.00
1306 ELEC-8.1.40 Copper winding wire (per K. G) 1 Kg 701.00
1307 ELEC-8.1.41 G.I. Strip / Plate / Wire (per K. G) 1 Kg 68.00
1308 ELEC-8.1.42 Alluminum Bus bars/Strips/accessories 1 Kg 234.00
1309 ELEC-8.1.43 Alluminum winding wire 1 Kg 322.00
1310 ELEC-8.1.44 6.2 Volt series bulb (25 Nos.) 25 Nos 91.00
1311 ELEC-8.1.45 6.2 Volt series bulb with navar plate(25 Nos.) 25 Nos 97.00
1312 ELEC-8.1.46 Supply of Rotating machine 1 No 16500.00
1313 ELEC-8.1.47 Supply and fixing of 6mm thick MS Chekered plate. 1 Kg 67.00
1314 ELEC-8.1.48 Supply and fixing of 6mm thick Alluminium Chekered plate. 1 Kg 266.00
1315 ELEC-8.1.49 Copper old winding Wire scrap for 1 Kg 1 Kg 165.00
1316 ELEC-8.1.50 Cement 1 Kg 6.60
1317 ELEC-8.1.51 Hylam Sheet 1 sq. 0.60
inch
1318 ELEC-8.1.52 Earth work excacvation including all soils for trench, Pole Pit 1 Cum 220.00
and Earth Pit.
1319 ELEC-8.1.53 Cost of Sand 1 Cum 594.00
1320 ELEC-8.1.54 Cost of Bricks 1000 Nos 3819.00
1321 ELEC-8.1.55 25mm Nominal Bore light grade G.I.Pipe 1 Mtr 226.00
1322 ELEC-8.1.56 25mm Nominal Bore Medium grade G.I.Pipe 1 Mtr 242.00
211
RATE FOR
SL.
NO.
2014-15
1323 ELEC-8.1.57 40mm Nominal Bore light grade G.I.Pipe 1 Mtr 355.00
1324 ELEC-8.1.58 40mm Nominal Bore Medium grade G.I.Pipe 1 Mtr 381.00
1325 ELEC-8.1.59 Drilling of 16 Nos through holes of 12mm dia to G.I pipe 1 No 6.00
1326 ELEC-8.1.60 G.I Nuts, Bolts an Washers each set 1 Set 11.00
1327 ELEC-8.1.61 18" dia 2" thick hume pipe ring 1 No 220.00
1328 ELEC-8.1.62 18" dia 3" hume pipe ring 1 No 275.00
1329 ELEC-8.1.63 2" thick CC cover for hume pipe ring with handle. 1 No 121.00
1330 ELEC-8.1.64 Supply of Saddle / Clamps suitable for fixing 2 Core 4 to 10 100 Nos 249.00
Sqmm Cable.
1331 ELEC-8.1.65 Supply of Saddle / Clamps suitable for fixing 4 Core 4 & 6 100 Nos 249.00
Sqmm Cable.
1332 ELEC-8.1.66 Supply of Saddle / Clamps suitable for fixing 4 Core 10 & 16 100 Nos 314.00
Sqmm Cable.
1333 ELEC-8.1.67 Supply of Saddle / Clamps suitable for fixing 3.5 Core 25 & 35 100 Nos 382.00
Sqmm Cable.
1334 ELEC-8.1.68 Supply of Saddle / Clamps suitable for fixing 3.5 Core 50 Sqmm 100 Nos 545.00
Cable.
1335 ELEC-8.1.69 Supply of Saddle / Clamps suitable for fixing 3.5 Core 70 & 95 100 Nos 605.00
Sqmm Cable.
1336 ELEC-8.1.70 Supply of Saddle / Clamps suitable for fixing 3.5 Core 120 to 100 Nos 726.00
185 Sqmm Cable.
1337 ELEC-8.1.71 Supply of Saddle / Clamps suitable for fixing 3.5 Core 240 & 100 Nos 908.00
300 Sqmm Cable.
1338 ELEC-8.1.72 Supply of Saddle / Clamps suitable for fixing 3.5 Core 400 100 Nos 1210.00
Sqmm Cable.
1339 ELEC-8.1.73 Supply and fixing of Anchor fastner with fan hook / Providing 1 No 88.00
MS Fan hook with grouting and cement plastering.
LABOUR RATES
1340 ELEC-8.1.74 Skilled Electrician 1 No 440.00
1341 ELEC-8.1.75 Semi Skilled Electrician / Lineman 1 No 375.00
1342 ELEC-8.1.76 Skilled Mason 1 No 385.00
1343 ELEC-8.1.77 Semi Skilled Mason 1 No 345.00
1344 ELEC-8.1.78 Skilled Welder 1 No 385.00
1345 ELEC-8.1.79 Semi Skilled Welder 1 No
1346 ELEC-8.1.80 Skilled Fitter 1 No 385.00
1347 ELEC-8.1.81 Semi Skilled Fitter 1 No 345.00
1348 ELEC-8.1.82 Helper (Electrical) 1 No 345.00
1349 ELEC-8.1.83 Skilled Carpenter 1 No 385.00
1350 ELEC-8.1.84 Semi Skilled Carpenter 1 No 345.00
1351 ELEC-8.1.85 Man Mazdoor 1 No 295.00
1352 ELEC-8.1.86 DG Set operator/Air Compressor 1 No 385.00
1353 ELEC-8.1.87 2nd Class DG Set operator/Air Com 1 No 345.00
1354 ELEC-8.1.88 Plumber (Licensed)/Pipe Fitter 1 No 440.00
1355 ELEC-8.1.89 Painter Class -2 1 No 345.00
1356 ELEC-8.1.90 Diploma Engineer / Surveyor 1 No 550.00
1357 ELEC-8.1.91 Graduate Engineer 1 No 735.00
212
RATE FOR
SL.
NO.
2014-15
1358 ELEC-8.1.92 ITI Certificate holder 1 No 440.00
1359 ELEC-8.1.93 Stenographer / Computer Operator 1 No 485.00
9.1 WIRELESS FIRE ALARAM SYSTEM
1360 ELEC-9.1.1 Supply and fixing of wireless smoke detection control panel of 1 No 42171.00
28 wireless zones, 2 Hard wired Zones, Tamper Alert, Pass
code protected, RF jamming recognition, diagnostic feature
for RF signal strength between panel and each detector, vent
reporting using PSTN telephone line, dialing upto 4 telephone
numbers, event reporting as per users choice, LCD screen
display, two way voice interaction, battery backup stand by
time up to 12 hrs. (Cease Fire / Visonic / Honeywell) Including
transportation, all taxes and all labour charges etc complete.
1361 ELEC-9.1.2 Supply and fixing of Wireless Repeater.The wireless repeater 1 No 9961.00
extends the communication range of detection by relaying
data between receiver and remote wireless transmitter.
(Cease Fire / Visonic / Honeywell) Including transportation, all
taxes and all labour charges etc complete.
1362 ELEC-9.1.3 Supply and fixing of Wireless Siren Strobe external wireless 1 No 13946.00
siren - a fully supervised power code outdoor (IP55) wireless
Siren and strobe light. Designed for external installation. Wire
- Free connection between control panel and siren.
Convenient rapid no- mess installation. Separate fire alarm
signals, 98db Piezo siren and high power strobe light. Weather
resistant, IP55, 2-way communication for local and remote
diagnostics. Plug-in power supply, NIMH rechargeable back-up
power battery, transmits status, tamper, low- battery,
supervisory and AC loss messages to the control panel, Tri-
State tamper switch identifies screw manipulation removal of
cover or playing from the wall.(Cease Fire / Visonic /
Honeywell) Including transportation, all taxes and all labour
charges etc complete.
1363 ELEC-9.1.4 Supply and fixing of wireless Fully Supervised Smoke Detector, 1 No 6973.00
Photoelectric detection technology for superior detection
sensitivity , sound and transmitted for smoke, tamper and low
battery, works on power code protocol, easy programming
and enrolling to the control panel, long life 9 volt alkaline or
lithium battery. (Cease Fire / Visonic / Honeywell) Including
9.2 ADDRESSABLE - FIRE ALARM SYSTEM
1364 ELEC-9.2.1 Supply, Installation, testing and commissioning of wall 1 No 688750.00
mounting 10 loop micro processor based analog addressable
fire control panel expandable by minimum 2 additional loops
with minimum 80 character LCD display 4 access levels
1000 events, historical logging, flash E-PROM, 240 volts A C
Power supply, automatic battery charger, 24V SLA batteries
suitable for operating the entire system including tack back
units and the hooters/strobes for a minimum of 4 hours in
battery condition the panel shall have suitable power
213
RATE FOR
SL.
NO.
2014-15
amplifiers for hooter / strobes the panel shall be capable
beeing integrated with the BMS system and shall include cost
of supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as per
the specification and as required fixing of 10 loop Micro
processor based Fire Alarm control panel with zonal indictions
and battery back up as per detailed specifications.(Makes:
Notifier / Edwards).
with minimum 80 character LCD display 4 access levels 1000
events, historical logging, flash E-PROM, 240 volts A C Power
supply, automatic battery charger, 24V SLA batteries suitable
for operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
condition the panel shall have suitable power amplifiers for
hooter / strobes the panel shall be capable beeing integrated
with the BMS system and shall include cost of supply,
installation of any additional modules or interfaces required
for the same. The panel shall be completed as per the
specification and as required fixing of 10 loop Micro processor
based Fire Alarm control panel with zonal indictions and
battery back up as per detailed specifications.(Makes: Siemens
/ Morley / Bosch).
battery back up as per detailed specifications. (Makes: Notifier
/ Edwards).
214
RATE FOR
SL.
NO.
2014-15
/ Morley / Bosch).
battery back up as per detailed specifications. (Makes: Notifier
/ Edwards).
battery back up as per detailed specifications. (Makes:
Siemens / Morley / Bosch).
215
RATE FOR
SL.
NO.
2014-15
battery back up as per detailed specifications.(Makes: Notifier
/ Edwards).
/ Morley / Bosch).
/ Edwards).
216
RATE FOR
SL.
NO.
2014-15
/ Morley / Bosch).
/ Edwards).
/ Morley / Bosch).
1376 ELEC-9.2.13 Supply, Installation, testing and commissioning of intellegent 1 No 118750.00
217
RATE FOR
SL.
NO.
2014-15
analogue addressable Repeater panel including the cost of
mounting accessories complete as per specification as
required. (Makes: Notifier / Edwards).
1377 ELEC-9.2.14 Supply, Installation, testing and commissioning of intellegent 1 No 106400.00
analogue addressable Repeater panel including the cost of
mounting accessories complete as per specification as
required. (Makes: Siemens / Morley / Bosch).
1378 ELEC-9.2.15 Supply and fixing of addressable wall mounting strobes cum 1 No 6413.00
hooters including the cost of mounting accessories complete
as per specifications and as required including testing and
commissioning. (Makes: Notifier / Edwards).
1379 ELEC-9.2.16 Supply and fixing of addressable wall mounting strobes cum 1 No 5700.00
hooters including the cost of mounting accessories complete
as per specifications and as required including testing and
commissioning. (Makes: Siemens / Morley / Bosch).
1380 ELEC-9.2.17 Supply and installation of addressable analogue manual call 1 No 6223.00
point with resetable flexible element to initiate alaram
including the cost of mounting accessories etc. complete.
(Makes: Notifier / Edwards).
1381 ELEC-9.2.18 Supply and installation of addressable analogue manual call 1 No 5605.00
point with resetable flexible element to initiate alaram
including the cost of mounting accessories etc. complete.
(Makes: Siemens / Morley / Bosch).
1382 ELEC-9.2.19 Supply and instllation of intallegent analogue addressable 1 No 6365.00
photo electric smoke detector including cost of base plate
etc., complete as per specification with required fittings and
accessories. (Makes: Notifier / Edwards).
1383 ELEC-9.2.20 Supply and instllation of intallegent analogue addressable 1 No 5700.00
photo electric smoke detector including cost of base plate
etc., complete as per specification with required fittings and
accessories. (Makes: Siemens / Morley / Bosch).
1384 ELEC-9.2.21 Supply and installation of intallegent analogue addressable 1 No 5059.00
rate of rise cum fixed temparature heat detectors including
the cost of base plate. 75mm dia MS outlet box for fixing of
the detector base, mounting accessories etc., complete as per
specifications and as required. (Makes: Notifier / Edwards).
1385 ELEC-9.2.22 Supply and installation of intallegent analogue addressable 1 No 4560.00
rate of rise cum fixed temparature heat detectors including
the cost of base plate. 75mm dia MS outlet box for fixing of
the detector base, mounting accessories etc., complete as per
specifications and as required. (Makes: Siemens / Morley /
Bosch).
1386 ELEC-9.2.23 Supply and installation of intalligent analogue addressable 1 No 6175.00
multi criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet box for
fixing of the detector base, mounting accessories etc.,
complete as per specifications and as required. (Makes:
218
RATE FOR
SL.
NO.
2014-15
1387 ELEC-9.2.24 Supply and installation of intalligent analogue addressable 1 No 5558.00
multi criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet box for
fixing of the detector base, mounting accessories etc.,
1388 ELEC-9.2.25 Supply and Installation of Intalligent analogue addressable 1 No 5225.00
Control Modules including the cost of mounting accessories
Control Modules including the cost of mounting accessories
monitor modules including the cost of mounting accessories
monitor modules including the cost of mounting accessories
fault isolator modules including the cost of mounting
accessories complete as per specifications and complete as
required. (Makes: Notifier / Edwards).
fault isolator modules including the cost of mounting
accessories complete as per specifications and complete as
required. (Makes: Siemens / Morley / Bosch).
9.3 CONVENTIONAL - FIRE ALARM SYSTEM
1394 ELEC-9.3.1 Supply, Installation, testing and commissioning of 1 No 7500.00
conventional Micro processor based Fire Alarm panel with 2
zone, 12V SMF batteries etc., complete with all standard
accessories. (Makes: System Censor / Ravel / Pinnacle)
219
RATE FOR
SL.
NO.
2014-15
1401 ELEC-9.3.8 Supply and installation of Repeater panel including the cost of 1 No 12500.00
mounting accessories complete as per specifications and as
required. (Makes: System Censor / Ravel / Pinnacle)
1402 ELEC-9.3.9 Supply and installation of duel tone electronic hooter of 85dB 1 No 675.00
including the cost of mounting accessories complete as per
specifications and as required.
1403 ELEC-9.3.10 Supply and installation of dust and vermin proof manual call 1 No 650.00
point to initiate audio visual alarm including the cost of
mounting accessories complete as per specifications and as
required.
1404 ELEC-9.3.11 Supply and installation of response indicators for above false 1 No 150.00
ceiling detectors.
1405 ELEC-9.3.12 Supply and installation of plug - in type multi criterion 1 No 1800.00
detectors including the cost of base plate. 75mm dia M.S.
outlet box for fixing of the detector base. Mounting
accessories etc., complete as per specifications as required.
(Makes: System Censor / Ravel / Pinnacle)
1406 ELEC-9.3.13 Supply and installation of plug -in type photo electric smoke 1 No 1750.00
detectors including the cost of base plate. 75mm dia MS
outlet box for fixing of the detector base. Mounting
accessories etc complete and as per specifications and as
required. (Makes: System Censor / Ravel / Pinnacle)
1407 ELEC-9.3.14 Supply and installation of plug -in type rate of rise cum fixed 1 No 1700.00
temperature heat detectors including the cost of base plate.
75mm dia MS outlet box for fixing of the detector base,
mounting accessories etc., complete as per specifications and
as required. (Makes: System Censor / Ravel / Pinnacle)
9.4 FIRE EXTINGUISHERS
1408 ELEC-9.4.1 Supply and fixing of ABC stored pressure squeeze grip type fire 1 No 9009.00
extinguishers, 10 kg capacity, ISI CE marked Is:13849 filled
with ABC Mono Ammonium Phosphate base powder-90
pressurized with dry Nitrogen Gas at 15 Kg / sqcm complete
with discharge hose and wall mounting bracket, Insta Alert
facility, 2mm Mild Steel, EPDM Rubbers, Pressure Guage,
which work effectively on all class of fires (A, B, C & Electrical
220
RATE FOR
SL.
NO.
2014-15
fires) with 5 years warranty (Cease Fire / Minimax make)
Including transportation, all taxes and all labour charges etc
complete.
1409 ELEC-9.4.2 Supply and fixing of ABC stored pressure squeeze grip type fire 1 No 6394.00
extinguishers, 10 kg capacity, ISI CE marked Is:13849 filled
with ABC Mono Ammonium Phosphate base powder-50
pressurized with dry Nitrogen Gas at 15 Kg / sqcm complete
with discharge hose and wall mounting bracket, 2mm Mild
Steel, EPDM Rubbers, Pressure Guage, which work effectively
on all class of fires (A, B, C & Electrical fires) with 2 years
warranty (Safex / Kenex / Bharat / Reliance make) Including
1410 ELEC-9.4.3 Supply and fixing of ISI make ABC Power MAP 5 Kg Fire 1 No 6161.00
extinguisher Mono ammonium phosphate power 90, stored
pressure type, pressure gauge gross wt. 8 kg, empty wt.3 kg,
can Ht.449mm, Diameter 150mm, Discharge time less than 15
sec, controllable discharge mechanism, range min. 4 mts
applicable on classes A,B, C & electrically started fires, A-
rating 144A, B-rating 89B, can construction: Deep drawn Co2
mig welding, wall construction: Forging & Machining, internal
coating of can: Epoxy power coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.80mm, Helium leakage detection tested, insta -
alert, ISI & EN approved with 5 years warranty (Cease Fire /
Minimax make) Including transportation, all taxes and all
labour charges etc complete.
applicable on classes A,B, C & electrically started fires, A-
rating 144A, B-rating 89B, can construction: Deep drawn Co2
mig welding, wall construction: Forging & Machining, internal
thickness:1.80mm, Helium leakage detection tested, ISI & EN
approved with 2 years warranty (Safex / Kenex / Bharat /
Reliance make) Including transportation, all taxes and all
applicable on classes A,B, C electrically started fires, A- rating
144A, B-rating 89B, can construction: Deep drawn Co2 mig
welding, wall construction: Forging & Machining, internal
221
RATE FOR
SL.
NO.
2014-15
thickness:1.80mm, Helium leakage detection tested, insta -
alert, ISI & EN approved with 5 years warranty (Cease Fire /
Minimax make) Including transportation, all taxes and all
applicable on classes A,B, C electrically started fires, A- rating
144A, B-rating 89B, can construction: Deep drawn Co2 mig
welding, wall construction: Forging & Machining, internal
thickness:1.80mm, Helium leakage detection tested, ISI & EN
approved with 2 years warranty (Safex / Kenex / Bharat /
Reliance make) Including transportation, all taxes and all
1414 ELEC-9.4.7 Supply and fixing of ISI make Ceiling Mounted ABC MAP 90, 5 1 No 6625.00
Kg stored pressure type, pressure gauge, Gross Wt.7.7 kg,
Empty Wt.2.7 kg, Can Ht226mm , Dia 230mm, Discharge time :
less than 8 sec, Auto discharge mechanism on temperature
rise, Applicable on A,B,C, & Electrically - started fires, Can
Construction: Forging & Machining, Internal coating of Can:
Epoxy Power coating, External Coating of Can: Epoxy Polyster
powder coating, sheet metal thickness:1.80mm , Helium
leakage detection tested, Insta - alert, ISI & EN approved with
5 years warranty (Cease Fire / Minimax make) Including
1415 ELEC-9.4.8 Supply and fixing of ISI make Ceiling Mounted ABC MAP 50, 5 1 No 5339.00
Kg stored pressure type, pressure gauge, Gross Wt.7.7 kg,
Empty Wt.2.7 kg, Can Ht226mm , Dia 230mm, Discharge time :
less than 8 sec, Auto discharge mechanism on temperature
rise, Applicable on A,B,C, & Electrically - started fires, Can
Construction: Forging & Machining, Internal coating of Can:
Epoxy Power coating, External Coating of Can: Epoxy Polyster
powder coating, sheet metal thickness:1.80mm , Helium
leakage detection tested, ISI & EN approved with 2 years
warranty (Safex / Kenex / Bharat / Reliance make) Including
1416 ELEC-9.4.9 Supply and fixing of 2 Kg Fire exitinguisher Clean Agent HFC 1 No 13870.00
236, Zero ODP, Stored pressure type, pressure guage, gross
weight 3.6Kg empty weight 1.6 Kg, can weight 341mm,
Diameter 108mm, discharge time minimum 6 secs,
controllable discharge mechanism, range minimum 2 meters,
applicable on class A,B,C and electrically started Fire, A rating
5A, B rating 34B, can construction: Deep drawn & CO2 mig
222
RATE FOR
SL.
NO.
2014-15
welded, Valve construction: Forging & Machining, Internal
coating of Can: Epoxy powder coating, External coating of can:
Epoxy polyster powder coating, sheet metal thickness: 1.60
mm, Helium leak detection tested, 5 Years warranty.(Makes:
Ceasefire / Minimax)
1417 ELEC-9.4.10 Supply and fixing of 4 Kg Fire exitinguisher Clean Agent HFC 1 No 24415.00
236, Zero ODP, Stored pressure type, pressure guage, gross
weight 6.9Kg empty weight 2.9 Kg, can weight 435mm,
Diameter 140mm, discharge time minimum 9 secs,
controllable discharge mechanism, range minimum 4 meters,
applicable on class A,B,C and electrically started Fire, A rating
8A, B rating 55B, can construction: Deep drawn & CO2 mig
welded, Valve construction: Forging & Machining, Internal
coating of Can: Epoxy powder coating, External coating of can:
Epoxy polyster powder coating, sheet metal thickness: 1.60
mm, Helium leak detection tested, 5 Years warranty.(Makes:
Ceasefire / Minimax)
1418 ELEC-9.4.11 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg 1 No 9961.00
capacity confirming to IS 2878 made from ISI marked steam
less cylinder confirming to IS:7285 & CE certified and fitted
with ISI marked controlled valve confirming to IS:3224, high
pressure 1 Mtr discharge hose & horn complete with initial
gas charged with carrying handle with wheels and wall
mounting bracket. Squeeze lever discharge, used un-used
indicator, Aphoxy coated paint (Red) with 93% gloss with 2
years warranty (Cease Fire / Minimax make) Including
1419 ELEC-9.4.12 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity 1 No 7467.00
confirming to IS 2878 made from ISI marked steam less
cylinder confirming to IS:7285 & CE certified and fitted with ISI
marked controlled valve confirming to IS:3224, high pressure
1 Mtr discharge hose & horn complete with initial gas charged
with carrying handle with wheels and wall mounting bracket.
Squeeze lever discharge, used un-used indicator, Aphoxy
coated paint (Red) with 93% gloss with 2 years warranty
(Safex / Kenex / Bharat / Reliance make) Including
1420 ELEC-9.4.13 Supply and fixing of DCP powder type cylindrical shape fire 1 No 2100.00
extinguisher 2 Kg with fixing hangers, hose, brackets, screws
to required size etc., complete as per IS:13849 - wall mounted
type. (Makes: Minimax / Safex / Kenex / Reliance)
223
RATE FOR
SL.
NO.
2014-15
1423 ELEC-9.4.16 Supply and fixing of Escape signage boards in Rigid Photo 1 No 1300.00
luminecent based glow in Dark rigid sheet with high intensity
luminous properties with specificaiton of Cease Fire or its
equivalent make Model-1ES01
1424 ELEC-9.4.17 Supply and fixing of Cease fire or its equivalent Escape gear 1 No 15010.00
Mild Steel box size 425mmx360mmx140mm Epoxy powder
coated to protect it from Weathering , smoke hood tested to
Eupropean Standard EN 403 1993-S known to reduce Carbon
Monoxide, propend(acrloein), hydrogen chloride, hydrogen
Cyanide and Solid and liquid toxic particles to manageable
level for atleast 15 minutes shall with stand tempeartures
upto 80 degrees single use only Fire Blanket size 1.2m x1.8m
used to cover any vessel containing used to Extinguish a
clothing fire wrap blanket around the victim.
1425 ELEC-9.4.18 Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand 1 Set 1200.00
buckets along with bucket sand, Fire buckets with round
bottom type enamel painted, white inside & red out side and
letter FIRE inblack out side & Handle with mounting bracket.
1426 ELEC-9.4.19 Supply anmd fixing of Fire bucket stand fabricated by M.S. 1 Set 1000.00
angles to install for two numbers of buckets as per local fire
officers standards.
9.5 FIRE HYDRANT AND SPRINKLER SYSTEM
1427 ELEC-9.5.1 Supplying, installation, testing and commissioning of electric 1 Set 354000.00
driven main fire pump suitable for automatic operation and
consisting of following complete in all respect as required
a) Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,
mechanical seal to ensure a minimum pressure of 3.5 Kg /
sq.cm. at highest and farthest outlet at specified flow of 1620
lpm at 56 Mtr. head conforming to IS 1520
b) Suitable HP SQ cage induction motor, TEFC, synchronous
speed 1500 RPM, suitable for operation on 415Volts, 3 phase
50 Hz. AC with IP 55 protection for enclosure, horizontal foot
mounted type with Class-'F' insulation, conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling
guard, foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with
anti vibration pads.
Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
1428 ELEC-9.5.2 Supplying , installation , testing and commissioning of electric 1 Set 390000.00
consisting of following : complete in all respect as required
224
RATE FOR
SL.
NO.
2014-15
consisting of following : complete in all respect as required.
1430 ELEC-9.5.4 Supplying , installation, Testing and commissioning of diesel 1 Set 468000.00
engine driven main fire pump suitable for automatic operation
and consisting of following : complete in all respect as
required
a) Horizontal type, multistage, centrifugal pump of cast iron
body & bronze impeller with stainless steel shaft, mechanical
seal to ensure a minimum pressure of 3.5 Kg / sq.cm. at
highest and farthest outlet at specified flow of 1620 lpm at 56
Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator, diesel
engine conforming to relevant BS & IS standard complete with
auto starting mechanism, 12 Volts / 24 Volts electric starting
equipment, Diesel Tank, exhaust pipe extended upto 1 m.
outside pump house duly insulated with 50mm thick glass
wool with 1.0mm thick alluminium sheet cladding, residential
silencer, instruments and protection as per specification, stop
225
RATE FOR
SL.
NO.
2014-15
solenoid for auto stop in the event of fault with audio
indications, painted with post office red colour etc as
required.
Makes of Engines : Kirloskar / Cummins.
Makes of Pumps : Kirloskar / Mather&Platt
required
required.
required
226
RATE FOR
SL.
NO.
2014-15
required.
anti vibration pads.Makes of Engines : Kirloskar /
Cummins.Makes of Pumps : Kirloskar / Mather&Platt
a) End suction back pull out centrifugal pump, Std fitted with
BRONZE IMPELLER & gland packing ,capacity 171 Cum/hr
(2850 LPM) at total head 70 M at operating speed 2900 rpm.
Pump duty as per TAC
b) 55 KW / 75 HP, 3000 srpm, TEFC (IP55) horizontal foot
mounted, squirrel cage induction motor, suitable for 415 volts
+/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class ‘F’ insulated and
suitable for ambient temperature up to 50 deg C. Motor in
frame SC 250 M frame for driving above pump.
required
a) End suction back pull out pump, Std fitted with BRONZE
Impeller & gland packing, capable of delivering 171
Cum/hr(2850 LPM) at a total head of 70 M when operated at
1800 rpm and pump duty as per TAC
b) Liquid cooled, 85 BHP at 1800 rpm, diesel engine (Radiator
cooled) 12 Volts starting system with standard accessories
227
RATE FOR
SL.
NO.
2014-15
BRONZE IMPELLER & gland packing ,capacity 137 Cum/hr
(2280 LPM) at total head 70 mwc at operating speed 2900
rpm. Pump duty as per TAC
b) 45 KW / 60 HP, 3000 srpm, TEFC (IP55) Horizontal foot
frame SC 225 M frame
1436 ELEC-9.5.10 Supplying, installation, Testing and commissioning of diesel 1 Set 443750.00
required
b) Liquid cooled, 68 BHP at 1800 rpm, Diesel engine (Radiator
1437 ELEC-9.5.11 Supplying, installation, Testing and commissioning of diesel 1 Set 161250.00
required
BRONZE IMPELLER & gland packing ,capacity 97 Cum/hr (1620
LPM) at total head 56 mwc at operating speed 2900 rpm.
Pump duty as per TAC
b) 30 KW / 40 HP, 3000 srpm, TEFC (IP55) horizontal foot
frame SC 250 M frame for driving above pump.
228
RATE FOR
SL.
NO.
2014-15
required
b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine (Radiator
driven pressurisation / Jockey pump suitable for automatic
operation and consisting of following : complete in all respect
as required
seal and flow of 180 lpm at 56 Mtr head conforming to IS
1520
b) Suitable HP SQ cage induction motor TEFC type suitable for
operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of
protection for enclosure, horizontal foot mounted type with
Class-'F' insulation, conforming to IS-325
Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
driven pressurisation / Jockey pump suitable for automatic
as required
1520
229
RATE FOR
SL.
NO.
2014-15
Makes of Motors : Siemens/ ABB/ Kirloskar
driven Terrace / Booster pump suitable for automatic
as required.
1520
Makes of Motors : Siemens / ABB / Kirloskar
driven Terrace / Mono Bloc Booster pump suitable for
automatic operation and consisting of following : complete in
all respect as required.
a) Horizontal type, centrifugal End Suction pump of cast iron
1520
b) Three Phase High Speed Centrifugal Pump. Pump with CI
Impeller and Gland Packing with 9.3 KW / 12.5HP, 2 pole,
TEFC, 415 V, 3ph motor
anti vibration pads.Makes : Kirloskar
1520
230
RATE FOR
SL.
NO.
2014-15
Impeller and Gland Packing with 7.5 KW / 10 HP, 2 pole, TEFC,
415 V, 3ph motor
Makes : Kirloskar
1520
Impeller and Gland Packing with 5 KW / 7.5 HP, 2 pole, TEFC,
415 V, 3ph motor
Makes : Kirloskar
Providing , laying, testing & Commissioning of following
classes MS pipes conforming to IS 3589 and 1239 including
fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets
etc., complete.
Makes: Jindal / Hissar / Tata pipes
1445 ELEC-9.5.19 (a) 250 mm dia 1 Mtr 3245.00
1446 ELEC-9.5.20 (b) 200 mm dia 'C' Class 1 Mtr 3210.00
1447 ELEC-9.5.21 (c) 200 mm dia 'B' Class 1 Mtr 2800.00
1448 ELEC-9.5.22 (d) 150 mm dia 'C' Class 1 Mtr 2400.00
1449 ELEC-9.5.23 (e) 150 mm dia 'B' Class 1 Mtr 1930.00
1450 ELEC-9.5.24 (f) 100 mm dia 'C' Class 1 Mtr 1515.00
1451 ELEC-9.5.25 (g) 100 mm dia 'B' Class 1 Mtr 1275.00
1452 ELEC-9.5.26 (h) 80 mm dia 'C' Class 1 Mtr 1000.00
1453 ELEC-9.5.27 (i) 80 mm dia 'B' Class 1 Mtr 895.00
1454 ELEC-9.5.28 (j) 65 mm dia 'C' Class 1 Mtr 750.00
1455 ELEC-9.5.29 (k) 65 mm dia 'B' Class 1 Mtr 675.00
1456 ELEC-9.5.30 (l) 50 mm dia 'C' Class 1 Mtr 600.00
1457 ELEC-9.5.31 (m) 50 mm dia 'B' Class 1 Mtr 530.00
1458 ELEC-9.5.32 (n) 40 mm dia 1 Mtr 512.00
1459 ELEC-9.5.33 (o) 32 mm dia 'C' Class 1 Mtr 400.00
1460 ELEC-9.5.34 (p) 32 mm dia 'B' Class 1 Mtr 330.00
1461 ELEC-9.5.35 (q) 25 mm dia 'C' Class 1 Mtr 300.00
1462 ELEC-9.5.36 (r) 25 mm dia 'B' Class 1 Mtr 270.00
231
RATE FOR
SL.
NO.
2014-15
1463 ELEC-9.5.37 Supplying and fixing single headed Internal / External hydrant 1 No 8125.00
valve with instantaneous Gun metal couplings of 63mm dia
with Cast iron wheel ISI marked conforming to IS 5290 (Type -
A) with blank Gun Metal cap and chain as required.
Makes:Audco / Kirloskar / BDK /H Shankar/ Leader/ Zolotto /
Intervalve.
Supplying, fixing, testing and commissioning of butterfly valve
PN 1.6, with Bronze / Gun metal seat duly ISI marked
complete with Nuts, Bolts, Washers, gaskets, conforming to IS
13095 of following sizes as required.Makes: Audco / Kirloskar
/ BDK / H-Shankar / Leader/ Zolotto / Intervalve.
1464 ELEC-9.5.38 (a) 250 mm . dia 1 No 12525.00
1465 ELEC-9.5.39 (b) 200 mm . dia 1 No 5300.00
1466 ELEC-9.5.40 (c) 150 mm dia 1 No 4350.00
1467 ELEC-9.5.41 (d) 100 mm dia 1 No 3400.00
1468 ELEC-9.5.42 (e) 80 mm dia 1 No 3100.00
Providing, installation, testing and commissioning of dual plate
non - return valve of following sizes confirming to IS: 5312
complete with rubber gasket, GI bolts, nuts, washers etc as
required
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /
Intervalve.
1469 ELEC-9.5.43 (a) 200 mm dia 1 No 5000.00
1470 ELEC-9.5.44 (b) 150 mm dia 1 No 4000.00
1471 ELEC-9.5.45 (c) 100 mm dia 1 No 3725.00
1472 ELEC-9.5.46 (d) 80 mm dia 1 No 3500.00
1473 ELEC-9.5.47 (e) 50 mm dia 1 No 1723.00
Manufacture, Supply and delivery of CI Wafer Lug type
Butterfly Valves conforming to IS 13095/1991 (Reaffirmed
1998) excluding transportation, CED and taxes etc., complete.
Operation done with worm actuator ISI marked Rate at Ex-
FactoryMakes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / Intervalve.
1474 ELEC-9.5.48 (a) 250 mm . dia 1 No 17007.00
1475 ELEC-9.5.49 (b) 200 mm . dia 1 No 11849.00
1476 ELEC-9.5.50 (c) 150 mm dia 1 No 7631.00
1477 ELEC-9.5.51 (d) 100 mm dia 1 No 5088.00
1478 ELEC-9.5.52 (e) 80 mm dia 1 No 3812.00
1479 ELEC-9.5.53 (f) 50 mm dia 1 No 3067.00
Providing, installation, testing and commissioning of gun
metal valves of following sizes as required.
Make: Newage/ Winco/ Padmini
1480 ELEC-9.5.54 (a) 50 mm dia 1 No 1750.00
1481 ELEC-9.5.55 (b) 40 mm dia 1 No 1400.00
1482 ELEC-9.5.56 (c) 32 mm dia 1 No 1250.00
232
RATE FOR
SL.
NO.
2014-15
1483 ELEC-9.5.57 Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe 1 No 6140.00
with 63mm dia Male and Female Gun metal / SS couplings
duly binded with GI wire, rivets etc conforming to IS 636 (Type
-A) as required.
1484 ELEC-9.5.58 Supplying and fixing 63mm dia, 15 mtr long CP hose pipe with 1 No 5510.00
63mm dia Male and Female Gun metal / SS couplings duly
binded with GI wire, rivets etc conforming to IS 636 (Type -A)
as required.
1485 ELEC-9.5.59 Supplying and fixing First -Aid Hose Reel with MS construction 1 No 7500.00
spray painted in Post office Red, Conforming to Is 884 with
upto date amendments, complete with the following as
required.
a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose
Thermoplastic / Textile reinforced / Rubber braided /
Polypropylene Type - 2 as per IS:12585
Make: Eversafe/ Reliance/ Newage/ SRI
b) 20mm (Nominal internal) dia gun metal globe valve and
nozzle.
c) Drum and brackets for fixing the equipments on wall.
d) Connections from riser with 25mm dia stop valve (gun
metal) & MS pipe.
1486 ELEC-9.5.60 Supplying and fixing of hose cabinet of size 750mm X 600mm 1 No 3250.00
x 250mm made of No 16 gauge SWG CRCA sheet with 6mm
thick glazed glass door including necessary locking
arrangement suitable to accommodate 2 Nos 15 mtr long
Hose pipe, 1 No branch pipe, mounted on wall OR raised brick
platform and duly painted with Post office red externally and
white internally with synthetic enamel paint complete in all
respect, for external hydrant as required.
1487 ELEC-9.5.61 Supply and fixing 63mm dia Gun metal branch pipe with 1 No 2530.00
20mm (Nominal internal diameter) size Gun metal / SS nozzle
conforming to IS 903, suitable for instantaneous connection to
interconnect hose pipe coupling as required.
1488 ELEC-9.5.62 Supply and fixing 4 way fire brigade connection of cast iron 1 No 9100.00
body with 4 Nos Gun metal Male instantaneous inlet
couplings complete with cap and chain as required for 150mm
dia MS pipe connection, conforming to IS 904 as required.
1489 ELEC-9.5.63 Supply and fixing 2 way fire brigade connection of cast iron 1 No 6900.00
body with 2 Nos Gun metal Male instantaneous inlet
couplings complete with cap and chain as required for 100mm
dia MS pipe connection, conforming to IS 904 as required.
1490 ELEC-9.5.64 Supply and fixing air vessel made of 250 mm dia, 8 mm thick 1 No 16000.00
MS sheet, 1200mm in height with air release valve on top and
flanged connection to riser, drain arrangement with 25mm dia
233
RATE FOR
SL.
NO.
2014-15
Gun metal wheel valve, with required accessories, pressure
gauge and painting with synthetic enamel paint of approved
shade as required.
1491 ELEC-9.5.65 Providing fixing, testing and commissioning of 15mm size 1 No 490.00
quartzoid bulb type sprinklers of rating 68º C. pendent / side
wall with required accessories.Makes: HD / TYCO / VIKING /
NEWAGE/ SHARP
1492 ELEC-9.5.66 Providing and fixing of Pressure Switch in the MS pipe Line 1 No 2500.00
including connection etc as required.
Make : Danfoss / Indfoss / Approved makes
1493 ELEC-9.5.67 Providing and fixing Flow Switches in 100mm dia MS pipe. 1 No 5375.00
Makes : System Sensor / Switzer / Approved makes
1494 ELEC-9.5.68 Providing and fixing Flow Switches in 150 mm dia MS pipe. 1 No 7500.00
Makes : System Sensor / Switzer / Approved makes
1495 ELEC-9.5.69 Supply, installation, testing and commissioning of Bourden 1 No 675.00
type, stainless steel dial type pressure gauge with isolation
valve and pipe having calibration of 0-16 kg/cm2.
MAKE: HGURU / FIEBIG and Approved makes
1496 ELEC-9.5.70 Supply, installation, testing and commissioning of 25mm dia 1 No 1175.00
Gate valve
Makes : Zoloto / Leader / Approved makes
1497 ELEC-9.5.71 Supply, installation, testing and commissioning of 25mm dia 1 No 650.00
Ball valve
Makes : Zoloto / Leader / Approved makes
1498 ELEC-9.5.72 Supply, installation, testing and commissioning of 25 / 20mm 1 No 1250.00
dia Air Release Valve
1499 ELEC-9.5.73 Providing, fixing, testing, commissioning of installation control 1 No 9500.00
valve of Cast iron body and brass / Bronze working parts
comprising of water, motor alarm, bronze seat clapper, and
clapper arm, hydraulically driven mechanical gong bell to
sound continuous alarm when the Wet riser / Sprinkler system
activates, pressure gauges, emergency releases, strainer,
pressure switch, cock valve complete with drain valve and
bypass , test control box, ball valves, Ms pipe of required size,
flanges, orifice plate, gasket etc of size 150mm dia as
required.
Makes : HD / TYCO / NEWAGE
Supplying, installing, testing and commissioning approved
make CI body Foot Valve with brass strainer with necessary
flanges, nuts and bolts etc., complete on to the suction
line.Rate as per the lowest quotation of Bharat Fire Safety
Engineers.
Makes:Normex & approved makes
1500 ELEC-9.5.74 a) 200mm nominal dia 1 Ea 24790.00
1501 ELEC-9.5.75 b) 150mm nominal dia 1 Ea 13280.00
1502 ELEC-9.5.76 c) 100mm nominal dia 1 Ea 7450.00
1503 ELEC-9.5.77 d) 80mm nominal dia 1 Ea 5100.00
234
RATE FOR
SL.
NO.
2014-15
1504 ELEC-9.5.78 Supply and laying of 300mm dia NP2 RCC Hume pipe with AS per Civil
Collars for Road crossings SSR
Supplying and wrapping the anticorrosive material for buried
pipes with coating of Primer and wrapping with 4 mm thick
polymer corrosion resistant tape as per IS : 10221 with 15 mm
overlap as per specificatios.
1505 ELEC-9.5.79 a) 150mm nominal dia 1 Mtr 45.00
1506 ELEC-9.5.80 b) 100mm nominal dia 1 Mtr 40.00
1507 ELEC-9.5.81 c) 80mm nominal dia 1 Mtr 30.00
1508 ELEC-9.5.82 Supply, fabricating , installing structural steel supports for 1 Kg 60.00
fixing all sizes of MS pipes from ceiling / wall with MS
Channels, Angles, Flats, Rods, as required at site with anchor
fasteners, Clamps, threaded rods, nuts, bolts,washers etc
complete with painting.
1509 ELEC-9.5.83 Supply of 4 Core x 1.5Sqmm FRLS armoured copper cable as 1 Mtr 110.00
per IS. 7098 / Part-I / 1988 including all taxes etc., complete of
make Universal / CCI / Unicab / Polycab / Finolex / KEI /
Havells.
Havells.
Havells.
Havells.
10.1 GENERATORS SPECIFICATION
Supply, Transportation, erection and commissioning
(Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled
multi cylinder diesel generator set with alternator of - - - KVA/
- - - - - KW out put contineous rating directly coupled Engine
and Alternator with guard and mounted on a common base
plate of Robust construction and complete without control
panel having IP-52 protection, Acoustic Enclosure as per CPCB
norms , sound absorbing material, t to restrict sound level up
to 75 dB up to 1 mtr distance and as per CPCB norms etc as
per following specifications mentioned below.
A. Alternator : Kirloskar / Stamford / Crompton Greaves /
Leroy Somer make. The alternator of the output rating shall be
3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The
alternator is self excited, self regulated, and shall confirm to
IS: 13364 of 1992 with regulation of +5% from no load to full
load. degree of protections shall be IP23.
B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra
235
RATE FOR
SL.
NO.
2014-15
Diesel Engine start, developing suitable -------------- BHP output
at 1500 RPM with mechanical / electronic governing so as to
enable the alternator to give - - - - -KVA continuous output at
0.8 P.F. lagging at NTP conditions. The diesel engine shall be
capable of providing 10% O/L for 1 Hr for every 11 Hrs of
continuous running at full load. The engine with 1st filling of
oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation or
clading.
02. Diesel tank suitable for 8 to 12 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer
standards
1513 ELEC-10.1.1 15KVA, 3 Phase, 415, 50Hz, 19BHP, water cooled multi 1 No 385875.00
cylinder diesel generator set with alternator of 15 KVA out
put continous rating at 0.8 p.f, Batteries. (SOR-2014-15-ELEC-
10.1.1)
1514 ELEC-10.1.2 30KVA, 3 Phase, 415, 50Hz, 40 to 42 BHP, water cooled multi 1 No 496125.00
cylinder diesel generator set with alternator of 30KVA out
put continous rating at 0.8 p.f, Batteries. (SOR-2014-15-ELEC-
10.1.2)
put continous rating at 0.8 p.f, and Batteries .
IS: 13364 of 1992 with regulation of +5% from no load to full
load. degree of protections shall be IP21.
B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra
Diesel Engine start, developing suitable -------------- BHP output
at 1500 RPM with mechanical / electronic governing so as to
oil and Diesel etc.01. Exhaust pipe of required size and length
with insulation or clading.02. Diesel tank suitable for 8 to 12
236
RATE FOR
SL.
NO.
2014-15
Hours running capacity.03. Residential Silencer.04. SMF
Batteries with leads as per the Manufacturer standards
C. AMF Control Panel:- AMF control panel shall be fabricated
with 16SWG CRCA sheet shall be totally enclosed with dust
and Vermin proof, floor mounted / wall mounted type and
shall be comprising the following.
01. Voltmeter with selector switch.
02. 4 Pole MCCB incomer of ----------A rating of Schenieder /
L&T make for EB and DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current transformer.
08. Input Terminal board and output Terminal Board.
09. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays and timers with
one mode selector switch, set of push buttons.
14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core
1516 ELEC-10.1.4 63.00KVA, 3 Phase, 415, 50Hz, 78 to 83BHP, water cooled 1 No 771750.00
multi cylinder diesel generator set with alternator of 63KVA
out put continous rating at 0.8 p.f, and Batteries .
IS: 13364 of 1992 or latest version with regulation of +5%
from no load to full load. degree of protections shall be IP23.
B.Diesel Engine : Kirloskar / Cummins / Catterpiller Diesel
Engine start, developing suitable -------------- BHP output at
1500 RPM with mechanical / electronic governing so as to
237
RATE FOR
SL.
NO.
2014-15
oil and Diesel etc.01. Exhaust pipe of required size and length
with insulation or clading.02. Diesel tank suitable for 8 to 12
Hours running capacity.03. Residential Silencer.04. SMF
Batteries with leads as per the Manufacturer standards
C. AMF Control Panel:- AMF control panel shall be fabricated
with 16SWG CRCA sheet shall be totally enclosed with dust
and Vermin proof, floor mounted / wall mounted type and
shall be comprising the following.
01. Voltmeter with selector switch.
02. 4 Pole MCCB incomer of ----------A rating of Schenieder /
L&T make for EB and DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current transformer.
08. Input Terminal board and output Terminal Board.
09. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays and timers with
one mode selector switch, set of push buttons.
put continous rating at 0.8 p.f, and Batteries
put continous rating at 0.8 p.f, and Batteries
11.1 UPS SYSTEMS
1521 ELEC-11.1.1 Supply and installation of 800VA, 12VDC home UPS system 1 No 9500.00
pure sine wave out put, single phase input / Single phase
output. Makes: Servomax / Top Power / Amar Raja /
Samhitha.
1522 ELEC-11.1.2 Supply and installation of 1400VA, 24VDC home UPS system 1 No 13500.00
Samhitha.
1523 ELEC-11.1.3 Supply and installation of 2000VA, 36VDC home UPS system 19200.00
Samhitha.
238
RATE FOR
SL.
NO.
2014-15
1524 ELEC-11.1.4 Supply and installation of 2.0KVA true on line UPS system 1 No 29400.00
IGBT technology pure sine wave out put, double conversion
with auto and manual static by pass switch single phase input
/ Single phase output. Makes: CONSUL / Power one / Numeric
/ DB Power.
1525 ELEC-11.1.5 Supply and installation of 3.0KVA, 72VDC true on line UPS 1 No 39507.00
system IGBT technology pure sine wave out put, double
conversion with auto and manual static by pass switch single
phase input / Single phase output. Makes: CONSUL / Power
one / Numeric / DB Power.
1526 ELEC-11.1.6 Supply and installation of 5.0KVA, 180/192VDC true on line 1 No 68250.00
UPS system IGBT technology pure sine wave out put, double
1527 ELEC-11.1.7 Supply and installation of 7.5KVA, 180/192VDC true on line 1 No 94500.00
1528 ELEC-11.1.8 Supply and installation of 10KVA, 180/192VDC true on line 1 No 110250.00
1529 ELEC-11.1.9 Supply and providing of UPS cum battery rack up to 4 1 No 1500.00
batteries
1530 ELEC-11.1.10 Supply and providing of UPS cum battery rack 5 to 10 1 No 2875.00
batteries
1531 ELEC-11.1.11 Supply and providing of UPS cum battery rack upto 11 to 20 1 No 5175.00
batteries
1532 ELEC-11.1.12 Supply and fixing of 12V 26 AH SMF battery including wire 1 No 3850.00
leads make Quanta / Racket / Exide.
1537 ELEC-11.1.17 Supply and fixing of 12V, 120 AH MF battery including wire 1 No 9965.00
leads make Amar Raja(Power Zone) or Equivalent model of
Exide / Panasonic / Gotech.
1538 ELEC-11.1.18 Supply and fixing of 12V, 150 AH MF battery including wire 1 No 12750.00
leads make Amar Raja(Power Zone) or Equivalent model of
Exide / Panasonic / Gotech.
239
Government of Andhra Pradesh
COMMON SCHEDULE OF RATES AS

PER
A.P. REVISED STANDARD DATA FOR
THE YEAR 2014-15
(Effective from 1st June, 2014)
240
BOARD OF CHIEF ENGINEERS
241
Office of the Engineer-in-Chief(I.W)
I&cad Dept., Errummanzil,Hyderabad
Procs.No.ENC/IW/P&M/EE.3/DEE-10/AE/13305/Vol.37 dt:30.05.2014
Sub: Schedule of Rates as per A.P.Revised Standard Data for the year 2014-15-Irrigation & CAD
orks(Part-I),Road & Bridge Works(Part-2) and Drinking water supply schemes(Part-4)-approved-
Printing& Communication of SoRs-Reg.
Ref: 1)G.O.Ms.No.49,I&CAD (PW:Reforms)Dept., dt:2.3.2009
2)ENC(PH) Lr.No. 146/T1/SoR/2014-15/2014 dt. 31-05-2014
3)Industrial Consumer Price Index points obtained from Commissioner,Labour Department
4)Minutes of BOCEs meeting for Schedule of Rates held on 24.05.2014.
****
st
The Government have approved A.P.Revised Standard Data vide ref 1 cited.The Schedule of Rates as
per A.P.Revised Standard Data for the year 2014-15 is approved based on the following.
The Engineer-in-Chief, Public Health Department has furnished draft rates for Public Health works items
nd
and Public Health Materials vide ref 2 cited.
The Engineer-in-Chief (PR) has furnished the draft rates for Roads & Bridge items for the year 2014-15
in lieu of the Engineer-in-Chief (R&B) Dept. as the R&B Department is following the MoRTH data in place of A.P.
Revised Standard Data. The Engineer-in-Chief (PR) has yet to furnish corrected copy of Roads & Bridges item
rates.
The Chief Engineer(Buildings),R&B Department has yet to furnish the Part-III of Common SoR i.e.,
Buildings For Irrigation & CAD work items, the regional Superintending Engineers, Irrigation Circles of
Hyderabad,Chitttoor & Dowlaiswaram in charge of Telangana, Rayalaseema and Andhra regions respectively
have submitted the draft basic rates of materials. The Superintending Engineer, Mechanical Circle, Hyderabad
has furnished draft rates of Mechanical and Workshop items. Accordingly, the draft rates for Irrigation &
Command Area Development are prepared.
The labour wages are finalized based on market rates duly keeping in view of the minimum wages
rd
calculated from the index points obtained from the Commissioner, Labour Department vide ref 3 cited for
finalizing the Labour rates for SoR 2014-15.
Based on the proposals, the draft Schedule of Rates for the year 2014-15 were reviewed and finalized in
the annual Board of Chief Engineers meeting held on [email protected] P.M. in the BoCE Conference hall,
Jalasoudha Building, Hyderabad.
The procedure for the adoption of Irrigation work items, lead & lift charges (Common to all
departments) is incorporated in the Annexure-A of SoR.
The approved basic rates are applicable to the datas as per A.P.Revised Standard Data approved by the
st
Government vide G.O.1 cited. The Government approval is necessary to adopt any other data (i.e) MoRT&H
Data for adopting the Road & Bridge Works(Part-2). The lead & lift charges are common to all Engineering
242
Departments. The detailed calculations are incorporated in the Lead & lift chapter in the I&CAD Works(Part-I) of
A.P.Revised Standard Data.
During the BoCE meeting held on 24-05-2014, it is observed that in some of the estimates,
Lead Charges are being added directly to the material basic rates for arriving the finished item rate. In
view of that, the BoCE has instructed to see that while arriving the finished item rate, the lead charges
are to be added to the material basic rates only after deducting the provision of “Contractor's Profit
and Overhead charges". One hard copy & compact disc containing Schedule of Rates is here with
communicated.
No other items other than the items communicated by this Office shall be introduced in the SoR.
The Heads of Department and Officers mentioned below are authorized to print the Schedule of Rates
for the year 2014-15. The unauthorized printing & selling of the SoR is strictly prohibited. The Schedule of Rates
for 2014-15 will be in force until the new SoR comes in to force. Any discrepancies found (or) corrections
required in SoR 2014-15 may be brought to the notice of undersigned for issuing corrections.
The revised rates will come into force from 1st June of 2014.
The receipt of the proceedings may be acknowledged.
Encl: SoR 2014-15 containing Part-I(Irrigation & CAD works) and Part-IV(Public Health Items)
Sd/-L.Narayan Reddy,30.5.2014,
Engineer-in-Chief(I.W.)
Chairman, BOCE(S.R)
I) Copy communicated to the Principal Secretary to Govt., I&CAD Dept., J-Block, A.P.Secretariat
Buildings, Hyderabad.
I) Copy Communicated to the following Heads of Departments along with Enclosures for information.
1) Engineer-in-Chief (Admn & NH)., Roads & Buildings Department.
2) Engineer-in-Chief (P.H.), Public Health Department.
3) Engineer-in-Chief (P.R.), Panchayath Raj Department.
4) Engineer-in-Chief (RWS) R W S, Department.
5) Chief Engineer (Buildings), R&B Department.
6) Copy of C.D containing Schedule of Rates 2014-15 & Standard data, part-1 (Irrigation & CAD
works) to all Engineers-in-Chief, Chief Engineers of Irrigation & CAD Department for favour of
information.
III) Copy to the Superintending Engineer, Irrigation Circle, Irrigation & CAD Department,Red Hill, Hyderabad for
necessary action.
Chairman, BOCE(S.R)
243
Important – Read The following
ANNEXURE- A
1) The SPIU(Irrigation), Centre for Good Governance (CGG), Hyderabad has developed software
package linking the basic input data of Irrigation with approved data of Irrigation work items.
2) The lead and lift charges are common to all Engineering Departments. The detailed calculations are
incorporated in the Lead &Lift charges chapter in the I&CAD works (Part-1) of A.P. Revised standard
data.
The Leads for Steel and Cement shall be from the nearest market place to the project area
3) Further, the CGG has also developed estimate preparation package to use in the preparation of
estimates duly making provision for incorporation of applicable lead & lift for different materials, Area
allowances for labour, Dewatering charges and VAT as additional.
4) For Gates & Hoist works, the excise duty on the fabrication of work (other than materials)shall be
added as per the Government Orders issued from time to time while preparing the estimate.
5) The estimate sanctioning authority shall physically verify each and every Irrigation work item data
incorporated in the estimate with basic input data before sanction of the estimate. Any lapses or
arithmetic errors arising in the sanction of data’s /estimate due to adoption of the software
package lies entirely on the concerned estimate sanctioning authority only.
6) Any discrepancies / corrections required for improper basic input data appearing in the approved
data’s of Irrigation work items in the software package and hard copy of SoR & Standard data’s
(part-1) may be brought to the notice of undersigned for issuing corrections.
Chairman, BOCE(S.R)
244
IRRIGATION & CAD WORKS
245
Part I-Preamble-Common SoR 2014-15
PREAMBLE
246
PREAMBLE
I.0 AREA ALLOWANCES:
A) CORPORATIONS & MUNICIPALITIES:

a) (i) 25% extra over the rates on labour component of works is allowed in all
Municipal Corporation Limits of Andhra Pradesh except Greater Hyderabad,
Greater Visakhapatnam and Vijayawada municipal corporations (up to a belt of 12
Kms. from Municipal Corporation limits) and other corporations as notified by the
Government from time to time.
(ii) 40% extra over the rates on labour component of works for Greater Hyderabad,
Greater Visakhapatnam and Vijayawada Municipal Corporation (up to a belt of 12
Kms. from Municipal Corporation limits).
b) Allow 20% extra over basic rates on labour component of works in all District
Headquarters and the remaining Municipal limits (up to a belt of 12 Kms from
Municipal limits).
c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of labour
component is allowed.
d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates of labour
component is allowed.
e) For works located inside Tirumala Temple, 20% extra over the basic rate of labour
component specified for Tirumala Hills is allowed.
f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple,
Tiruchanoor, Sri Govindaraja Swamy Temple at Tirupathi, Sri Kapleswara Swamy
Temple, Kapilatheerthm, Tirupathi and Sri Kalyana Venkateswara Swamy Temple,
Srinivasa Mangapuram , 20% extra over the basic rates of labour component for
Tirupathi Municipal Corporation is allowed.
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the work in the Jail compounds. Only
equivalent number of Man Mazdoor shall be provided in the Jail premises and no
women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
a. 20% over basic rates on labour component works allowed for works situated
within 10Kms belt of Industrial area of, Jeedimetla, Lingampally,
Ibrahimpatnam,Tandur in Ranga Reddy District, Ibrahimpatnam, Vuyyuru,
Jaggaiahpeta in Krishna District, Macherla, Gurajala, Challapalli in Guntur District
Garividi in Vijayanagaram District, Kothur in Mahabubnagar District, Patancheru,
Ramachandrapur in Medak District, Bibinagar in Nalgonda District, Ramagundam and
Godavarikhani in Karimnagar District, Renigunta in Chittoor District and Yerraguntla
& Mangampet in Kadapa District, Manchiryal, Mandamarri, Bellampalli in Adilabad
District, Sarpaka, Kothagudem, Paloncha, Manguguru, Singareni Collieries in
Khammam District, Kamalapur, Bhoopalpally of Warangal District, Wadepally of
Nalgonda District, Nagapally(Centenary Colony, Begumpet “X” roads),Takkelapally of
Karimnagar District, Hindupur, Tadipatri, Anantapur, Guntakal, Rayalcheruvu, Yadiki
of Anantapur District and Adoni, Dhone,Cement Nagar, Nandyal, Kurnool,
Yemmiganur & Bethamcherla of Kurnool District, Anakapally of Vishakhapatnam
District.
247
D) AGENCY / TRIBAL AREAS:

a) 25% extra is allowed for the works located within the interior Agency / Tribal limits, i.e.
for the works located within & upto16 KMs from any all weather route inside Agency /
Tribal.
b) 40% extra is allowed for the works located within the interior Agency / Tribal limits, i.e.
for the works located beyond 16 KMs from any all weather route inside Agency / Tribal.
NOTE: 1. No extra percentage is permissible in respect of Forest produce such as
Bamboo, Rellu grass and for all materials obtained from outside the Agency /
Tribal.
2. The extra percentage under Agency / Tribal areas allowance may be
allowed on the labour component and on the labour charges in the rates for
conveyance of materials.
3. The extra percentage on cost of materials in Agency / Tribal areas can be
allowed on the labour component only, if they are manufactured in the
Agency / Tribal areas itself except Forest produce.
E) GHAT ROADS:
For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5
times the existing length of the road for the purpose of leads only for conveyance of
materials based on the certificate for the Ghat Road given by the Superintending
Engineer concerned.
Foot Note: Under compelling circumstances, the concerned Chief Engineer can
adopt the equivalent length of road as 2 ½ times of actual length.
Note below area allowances:
If more than one area allowance ( such as those ) for (1) Municipalities (2) Agency /
Tribal areas (3) Industrial areas are applicable for a particular situation, only the
maximum out of the allowable percentages is to be allowed.
2.0 EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES:
I) EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION
IN RESTRICTED PLACES: -
A. TRIAL TRENCHES:
1) Trial trenches of not more than 2 metres in width…25% extra
B. TRIAL PITS:
1) Up to 2 Metres depth … 25% extra
2) 2 Metres to 4 Metres depth … 50% extra
6) More than 9 Metres depth … 200% extra
II) EXCAVATION IN RESTRICTED PLACES:-

I) Foundation of Buildings … 75% extra
248
II) For pipe lines where the depth is less … 75% extra than
1.5 times the width
III) For pipe lines where the depth is … 120% extra
1.5 times or more than the width
IV) Silt removal in restricted areas such … 120% extra
U. T’s., Culverts and Syphons.
V) Excavation of field channels … 75% extra
VI) For narrow trenches not more than
2 meters in width and depth not less
than twice the width and for excavation … 75% extra
of road boundary drains, model sections of
canals.
VII) High berm cutting of not more than … 50% extra
150 mm average thickness and
sectioning for roads
Note: 1) The extra percentage is allowed over Common item for all earth works (COM-MWRK-
Manual Works) for corresponding soil and Standard data items. It includes the
charges for all lifts and initial lead but does not include dewatering charges if any in
respect of all the items under (A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted places are
to be allowed for (2/3) rd of the cost and shall not to be allowed in respect of items
involving blasting component which may be taken as 1/3 of the cost.
3.0 SEIGNIORAGE CHARGES:
Note:
The rates of the materials indicated in the SOR are exclusive of Seigniorage Charges.
Appropriate Seigniorage Charges for relevant materials are to be added to the Unit rate of
work item in the estimates as fixed by the Government in G.O.Ms.No.198 (Industries and
Commerce Dept.) dt:13.08.2009. In case of revision, the revised rates as fixed by Mines and
Geology Department have to be adopted.
249
Labour Rates-Common SoR 2014-15
LABOUR RATES
250
LABOUR RATES
Sl S. Rate for
CATEGORY OF WORKER
No. 2014-15
1 2 3
I. SKILLED CATEGORY:
1 Bar bender 450

2 Black smith / Tin smith / Rivetor 385
3 Blaster 440
4 Carpenter Cl- I 385
5 Electrician ( Licensed ) 440
6 Fitter Cl- I 385
7 Floor Polisher / Tile Layer 385
8 Foreman 440
9 Gauge reader 370
10 Maistry / Work Inspector with Non-technical Qualification
SSLC/SSC/HSC 370
11 Mason Cl- I / Brick layer Cl- I 385
12 Mechanic Cl- I 385
13 Operator Air sprayer 385
14 compressor
/ DG set
Operator Batching plant 440
15 Operator Bus/Ambulance/ Lorry/ Tanker 440
16 Operator Concrete / Asphalt mixer 385
17 Operator Concrete / Asphalt paver 385
18 Operator Concrete pump / Placer/ ice plant 385
19 Operator Core drilling machine 440
20 Operator Crane/ Tower crane/ Cable way 440
21 Operator Drilling jumbo / Loco / Winch 385
22 Operator Grouting/ Guniting/ Shotcreting 385
23 Operator Jackhammer/Pneumatic tamper 385
24 Operator Pump / Ventilation fan 385
25 Operator Lathe/Drilling/Shearing machine 440
26 Operator Bending / Planing machine 385
27 Operator Road roller 385
251
S. Rate
Sl
CATEGORY OF WORKER for
No.
2014-15
1 2 3
28 Operator Shovel / Scraper / Dozer 440
29 Operator Spillway / Sluice gate 385
30 Operator Crusher / Conveyor / Mucker 385
31 Operator Tipper / Dumper / Transit mixer 440
32 Operator Concrete vibrator 385
33 Operator Vibratory plain / pad foot roller 385
34 Operator Wagon drill / Drifter 440
35 Painter Cl- I 440
36 Plumber / Pipe fitter 440
37 Sarang / Khalasi 385
38 Spun pipe moulder 385
39 Stone chiseller CI- I / Stone cutter Cl- l 385
40 Struct. steel Fabricator / Marker / Erector 440
41 Welder / Gas Cutter 385
42 Welder (X-ray quality) 440
II. SEMI SKILLED CATEGORY:
1 Asphalt Sprayer / Boiler attendant 345
2 Bhisti 345
3 Boatman with boat 360
4 Mazdoor 345
Cl- II / Erector
5 Cartman shuttering
with double bullock cart 395
6 Cartman with single bullock cart 370
7 Chavali / Navagani 345
8 Crowbarman / Jumper man 345
9 Fitter Cl- II 345
10 Gang man / Head / Survey mazdoor 345
11 Gardener / Trained mali 345
12 Air compressor / DG set 345
13 Helper Batching plant 345
14 Helper Blasting 345
252
S. Rate
Sl
CATEGORY OF WORKER for
No.
2014-15
1 2 3
345
15 Helper Bus/ Ambulance/ Lorry/ Tanker
345
16 Helper Bending/Shearing/Planing machine
345
17 Helper Carpenter
345
18 Helper Concrete / Asphalt mixer
345
19 Helper Concrete / Asphalt paver
345
20 Helper Core drilling machine
345
21 Helper Crane/ Tower crane/ Cable way
345
22 Helper Drilling jumbo / Loco / Winch
345
23 Helper Fitter / Fabrication/Electrician
345
24 Helper Grouting/ Guniting/ Shotcreting
345
25 Helper Jack hammer / Pneumatic tamper
345
26 Helper Laboratory / Instrumentation
345
27 Helper Road roller
345
28 Helper Shovel / Scraper / Dozer
345
29 Helper Crusher / Conveyor / Mucker
345
30 Helper Tipper / Dumper/ Transit mixer
345
31 Helper Vibrator
345
32 Helper Vibratory plain/ pad foot roller
345
33 Helper Wagon drill/ Drifter
345
34 Lineman Electric / Telephone
345
35 Mason Cl- ll / Brick layer Cl-II
345
36 Mechanic Cl- II
345
37 Painter Cl- II
345
38 Patkari / Neeraganti / Sowdy
345
39 Stone Chiseller Cl- II
345
40 Stone breaker / Hammer man
345
41 Valve man / Canal sluice operator
III. UN-SKILLED CATEGORY:
1 Cement / Asphalt handling care 295
Or
2 Civic worker 295
3 Man mazdoor 295
253
Sl S. Rate for
No. CATEGORY OF WORKER 2014-15
1 2 3
4 Woman mazdoor 295
5 Watchman 295
IV. OTHER CATEGORY:
1 Care-taker / conductor / Lift Attender 360
2 Cook / Mess man 360
3 Dhobi 360
4 Diploma Engineer / Surveyor 550
5 Diver with headgear 440
6 Graduate / Laboratory Assistant 440
7 Graduate Engineer/ Geologist 735
8 Horticulture Assistant / Photographer 370
9 ITI certificate holder / Tracer / Printer 440
10 Literate mazdoor 345
11 Stenographer / Computer Operator 485
12 Telephone / Wireless Operator 430
13 Typist / Job Typist 430
14 CAD operator with Diploma in Engineering/General degree
with CAD certificate 600
15 Jeep Driver 430
16 Data Processing Operator 600
Note: - 1)The wage should not be less than the minimum wages of schedule of employment, subject to
out turn. 2) 25% extra over the corresponding labour rates in respect of the work to be done during night
time subject to issue of certificate accordingly by the concerned estimate sanctioning authority for
providing in the data and by concerned Executive Engineer in charge of the work for payment. The night
time allowance is applicable only to the works done under Greater Hyderabad Municipal Corporation,
Greater Visakhapatnam Municipal Corporation and Vijayawada Municipal Corporation limits only.
254
Part I-Basic Input data for Irrigation items – Common SoR 2014-15
BASIC INPUT DATA

FOR IRRIGATION WORK
ITEMS
255
STATEMENT OF RATES FOR MATERIALS FOR THE

YEAR : 2014-15
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, is the criteria for Fixing market rates
for materials.
2 The rates for materials is inclusive of all taxes, duties and other local levies.
3 The rates for materials are exclusive of Seigniorage charges wherever applicable.
4 The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
5. The rates provided for useful rubble / stone chips from excavation shall be at dump yard.
S. Rate
Sl
DESCRIPTION OF MATERIAL UNIT for
No.
2014-15
1 2 3 4
1 Acetylene gas cum
320.00
2 Asphalt 80/100 Grade Kg
43.00
Binding wire Kg 70.00
3
4 Burnt stone slab 10 cm thick sqm
300.00
Cement 43 Gr/53 Gr Note: As per Monthly rate fixed 4000.00
5 by Sub- Committee. tonne (Rate for
5/2014)
6 Chequered plate Kg
60
Coarse aggregate 10-4.75 mm(excluding Seigniorage
7 cum 875
charges)
Coarse aggregate 20-10 mm(excluding Seigniorage
8 cum 1210
charges)
9 cum 1145
charges)
10 cum 635
charges)
The aggregate rates mentioned above (from Sl.No.7 to
Sl.No.10) are exclusive of Seigniorage charges but
including blasting charges of Rs.70/cum and 25%
machine crushing charges. However, if the metal is
obtained from hand broken, the blasting and
crushing charges shall be deducted. The aggregate
shall be HB Stone of Granite, Dolamite, Dolerite and
Trap. (Quartzite and Basalt with aggregate impact of
less than 20)
11 Coir brush Each 45
256
S. Rate
Sl
No.
2014-15
1 2 3 4
12 Copper sheet 16 SWG kg
695
Coursed rubble stone 30 x 30 x 45 cm(excluding
13 Each 20
Seigniorage charges)
Coursed rubble stone 30 x 30 x 60 cm(excluding
14 Each 23
Seigniorage charges)
15 Curing Compound Ltr
130
16 D – cord Rm
10
17 Delay - noiseless trunk Each
21
18 Detonating fuse coil Rm
11
19 Detonating shock tube / Cord relays Rm
65
20 Detonator delay type Each
23
21 Detonator electric Each
13
22 Detonator ordinary Each
9
23 Empty cement bag Each
4.5
24 Explosive ANFO kg
43
25 Explosive ANFO high strength booster kg
73
26 Explosive small dia ( Kelvex-220 or equivalent) kg
70
(a)Fine aggregate/ sand(unscreened) for Concrete

& Filtering items) (excluding Seigniorage charges) 462
27 cum
(b)Fineaggregate/Sand(unscreened)for
filling(excluding Seigniorage charges) 342
Fine aggregate /Sand (Screened) for Mortar ,Plastering
28 items and Sand blasting items(excluding Seigniorage cum
charges) 606
29 Geo-textile ( filter fabric ) 160 gsm sqm
110
132
154
32 G I Pipe 100 mm dia B Class Rm
735
33 G I Pipe 15 mm dia A class Rm
110
34 G I pipe 25 mm dia A class Rm
170
35 G I pipe 40 mm dia B class Rm
290
36 G I pipe 50 mm dia A class Rm
320
257
S. Rate
Sl
No.
2014-15
1 2 3 4
37 G I Pipe 80 mm dia B Class Rm
490
38 G.I Bolts / Nuts and Washers kg
106
39 G.I sheet ( plain ) tonne
66000
40 Hariyala turfing sods sqm
28
41 Hectometer stone one line dressed Each
240
42 Hemp yarn kg
72
43 Honne wood planks cum
54000
44 Hume pipe with collar 150 mm dia Rm
330
45 Hume pipe with collar 300 mm dia Rm
650
46 J- Bolts 30 cm long Each
35
47 Jungle wood planks cum
23000
48 Khandki stone 15 to 20 cm height Each
11
13
16
51 Kilometer stone one line dressed Each
450
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm
92
130
180
55 M S Bolts / Nuts / Washers kg
90
Murum(including loading charges but excluding
56 cum 107
Seigniorage charges )
57 Oxalic acid Ltr
76
58 Oxygen gas cum
52
59 PVC sealing strip Rm
44
60 PVC water stopper 310 mm wide Rm
485
61 PVC pipe of 100 mm dia Rm
175
Reinforcement steel (HYSD/TMT ) 46,500(Rate
62 Note: As per Monthly rate fixed by Sub-Committee tonne for 5/2014)
63 Resin bond Cement capsule Each
65
258
S. Rate
Sl
No.
2014-15
1 2 3 4
Rough stone 20 x 20 x 75 cm ( Including Loading

64 charges but excluding Seigniorage Charges) Each
23
Shahabad stone slab (including loading charges but
65 sqm
excluding Seigniorage charges) 229
Stone chips (at dump yard/Spoil)(including loading
66 charges but excluding Seigniorage charges) cum
175
Stone chips ( at quarry )(including loading charges but
67 excluding Seigniorage charges) cum
340
Structural steel angle / channel / beam / bars 45,000(Rate
68 tonne
Note: As per Monthly rate fixed by Sub-Committee for 5/2014)
69 Structural steel plate / flats 46000(Rate for
Note: As per Monthly rate fixed by Sub-Committee tonne 5/2014)
70 Super Plasticizer (Conplast RP-264 or equivalent ) kg
80
71 Synthetic Enamel paint 1st quality Ltr
240
72 Synthetic adhesive ( Resin + Hardener ) Kg
348
73 Tar felt joint filler board 12 mm thick sqm
420
74 Tar felt joint filler board 20 mm thick sqm
630
Through stones 20 x 20 x 30 to 45 cm (including
75 loading charges but excluding Seigniorage charges) Each
23
Through stones 25 x 25 x 45 to 60 cm long (including
76 Each 39
loading charges but excluding Seigniorage charges)
Through stones 30 x 30 x 65 to 75 cm long (including
77 Each 59
Un-coursed rubble stones ( at dump yard /Spoil)
78 (including loading charges but excluding Seigniorage cum
charges) 155
Un-coursed rubble stones ( at quarry )( including
79 cum 318
80 Water proofing compound kg
75
81 Welding electrodes 4 mm dia Each
11
82 Wire brush Each
41
259
S. Rate
Sl
No.
2014-15
1 2 3 4
83 Wire mesh 20 gauge sqm
212
84 Zinc chromate red oxide primer paint Ltr
175
85 inorganic zinc silicate Ltr
689
86 solvent less coal tar epoxy paint Ltr
271
87 Zinc phosphate primer Ltr
223
88 Allkyd based iron oxide paint Ltr
196
a) Cost of hdpe (80mm dia)
Rm 620
89 b) light black MS casing pipe 80mm dia (4mm thick)
Rm 670
90 welded steel wire fabric 100X100X5 mm size Kg
155
91 Protective Mastic Ltr
483
92 Solventless coal tar epoxy (brown) Ltr
374
260
ADDITIONAL MATERIALS FOR GATES & HOISTS FOR THE YEAR: 2014-15
GUIDE LINES:
a. For cast steel / Alloy steel / Forged steel / Bronze, aluminum alloy components the rates shall be
inclusive of cost of basic metal for these components, casting / forging charges, machining charges and
applicable excise duty on finished alloy component.
b. For other materials the rates shall be prevailing market rates.
S. Rate
Sl No. DESCRIPTION OF MATERIAL UNIT for
2014-15
1 2 3 4
1 Alloy steel ( IS : 1570-carbon steel ) shafts Kg
210
2 Alloy steel ( IS : 1570-stainless steel ) pins Kg 420
3 Bolt / Nut / Washer ( hot dipped galvanized ) Kg
130
4 Bolt / Nut / Washer ( stainless steel ) Kg
340
Bronze/Aluminum
5 Kg 912
alloy(IS:305)bearings/bushes
6 Cast iron blocks Kg
80
7 Cast steel drums / gears Kg
220
8 Cast steel pinions Kg
210
Cast steel wheels / pulleys / hubs / rollers /
9 Kg 180
retainers
Chemical for de-greasing/ derusting/phosphate
10 Ltr 140
coating
11 Coal tar epoxy paint Ltr
215
12 Forged steel hooks / shackles Kg
260
13 MS pipe 200 / 300 mm dia Kg
175
14 MS pipe 32 mm dia Rm
185
15 MS pipe 25 mm dia Rm
150
16 Rubber bottom seal ( IS : 11855 ) Rm
759
Rubber side seal ( music note type Teflon
17 claded ) ( IS : 11855 ) Rm
1518
Rubber side seal ( music note type uncladed )
18 ( IS : 11855 ) Rm
1155
19 Rubber side seal Z-type ( IS : 11855 ) Rm
1457
261
S. Rate
2014-15
1 2 3 4
Rubber corner seal ( Teflon claded )
20 Rm 1485
( IS : 11855 )
21 Rubber corner seal ( un claded ) ( IS : 11855 ) Rm
1100
22 Stainless steel plates / flats Kg
275
Welding electrode 4 mm dia x 450 mm (
23 Each 18
radiographic low hydrogen )
Welding electrode 4 mm dia x 450 mm (
24 Each 26
stainless steel )
25 Wire rope 6x37 constn ( IS : 2266 ) Kg
250
26 Zinc Kg
170
27 Zinc rich ( zinc content : 90 % ) epoxy primer Ltr
689
MATERIALS FOR POWER SUPPLY WORKS FOR THE YEAR : 2014-15
S. Rate
Sl
Description of Material Unit for
No.
2014-15
1 Electric pole with fixtures Each
2 Flood light 500 W Each
For
3 Flood light set Each establishing
4 Flouscent tube light 40 W Each Electrical Sub-
Stations at the
5 Flouscent tube light set Each Project Sites
6 HT / LT Circuit breaker with accessories Set wherever
necessary, the
7 HT / LT Line conductor 1000 m rates
PVC Armoured cable 10 sqmm and approved by
8 Rm APTRANSCO
below
9 PVC Armoured cable 16 sqmm Rm may be
followed.
10 PVC Armoured cable 25 sqmm Rm
11 PVC Armoured cable 70 sqmm Rm
262
DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT FOR THE YEAR:

2014-15
GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY / EQUIPMENT:
1 The Capital cost of machinery / equipment shall be for new machinery / equipment and shall
be inclusive of all taxes, duties, other levies.
2 The cost of transport vehicles / equipment shall be exclusive of cost of tyres and tubes.
3 The cost of drill rods / drill bits / air hose / water hose / road tax / insurance charges and
other consumable accessories shall not be included in the capital cost.
4 In cases, where the current capital cost of machinery / equipment could not be collected through
enquiries, the capital cost considered for previous year may be updated on the basis of average
percentage increase / decrease in the index for machinery published in the R.B.I Bulletin.
S. Rate
Sl
for
No: DESCRIPTION OF MACHINERY / EQUIPMENT UNIT
2014-15
1 2 3 4
1 Each 21,50,000
Agitator car / Transit mixer 2 cum ( excluding tyres )
86,000
tyres and tubes 6 sets
2 Air compressor 5 cmm electric Each 7,10,000
3 Air compressor 7 cmm diesel Each 9,50,000
5 Air compressor 8.5 cmm diesel Each 10,85,000
6 Air compressor 8.5 cmm electric Each 11,20,000
8 Angle Dozer 90 hp Each 54,75,000
9 Batching plant 0.5 cum with accessories Each 12,00,000
10 Batching plant 2 x 1.00 cum with accessories Each 42,45,000
11 Batching plant 2 x 1.50 cum with accessories Each 54,25,000
12 Bending machine Each 5,30,000
13 Clamp shell and hoisting ropes Each 30,000
14 Concrete bucket 1.5 cum Each 56,000
15 Concrete hand mixer 45/30 ltr Each 15,500
16 Concrete mixer 300/200 ltr(diesel) Each 1,50,000
17 Concrete mixer 300/200 ltr ( electric ) Each 1,45,000
18 Concrete mixer 600/400 ltr(diesel) Each 2,60,000
19 Concrete mixer 600/400 ltr ( electric ) Each 2,55,000
263
S. Rate
Sl for
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT
No: 2014-15
1 2 3 4
20 Concrete paver 100 Sqm / hr Each 23,61,000
21 Concete placer pump / hour Hour 120.80
22 Convey mucker ( excluding tyres ) Each 38,55,000
tyres and tubes 6 sets 86,000
23 Core drilling machine Each 11,00,000
24 Diesel generating set 30 KVA Each 4,95,000
25 Diesel generating set 50 KVA Each 6,40,000
26 Diesel Loco 45 hp Each 21,20,000
27 Dewatering pump 5 hp diesel Each 40,000
28 Dewatering pump 5 hp electric Each 24,500
29 Dewatering pump 10 hp diesel Each 60,000
30 Dewatering pump 10 hp electric Each 55,000
31 Dewatering pump 20 hp diesel Each 1,90,000
32 Dewatering pump 20 hp electric Each 1,00,000
33 Drifter Each 10,58,000
34 Drilling jumbo ( excluding tyres ) Each 13,02,000
35 Dumper 4.5 cum ( excluding tyres ) Each 14,50,000
36 Geophysical Ele.resistivity meter Each 4,75,000
37 Grouting pump Each 1,02,000
38 Guniting / sand blasting equipment Each 2,80,000
39 Ice plant with accessories 30 t / day Each 22,80,000
40 Jack hammer Each 65,000
41 Needle vibrator 40 mm petrol Each 20,000
42 Needle vibrator 40 mm electric Each 21,000
43 Needle vibrator 60 mm petrol Each 21,500
44 Needle vibrator 60 mm electric Each 25,500
45 Planing machine 4 m stroke Each 7,80,000
264
S. Rate for
Sl DESCRIPTION OF MACHINERY / EQUIPMENT UNIT 2014-15
No:
1 2 3 4
46 Plate shearing machine up to 12 mm Each 4,25,000
47 Pneumatic placer 0.5 cum Each 5,80,000
48 Pneumatic tamper Each 85,000
49 Pug cutting machine Each 16,000
50 Pusher leg Each 52,000
51 Road roller diesel 10 t Each 8,50,000
52 Shovel 0.50 cum 75 hp Each 37,50,000
53 Shovel 0.85 cum 110 hp Each 63,80,000
54 Stationery derrick crane 5 t Each 6,53,000
55 Tipper 5 cum ( excluding tyres ) Each 16,25,000
56 Tipping tub 1.5 cum Each 2,40,000
57 Tower crane 5 tonne Each 74,75,000
Each 4,25,000
58 Transformer 250 KVA
59 Truck 10 t ( excluding tyres ) Each 14,75,000
60 Truck mounted derrick crane 5 t ( excluding tyres ) Each 19,60,000
61 Upright drilling machine Each 56,000
Each 2,60,000
62 Ventilation fan 20 hp
63 Vibratory pad foot roller 8 t Each 29,50,000
64 Wagon drill Each 6,50,000
65 Water tanker 8000 ltr (excluding tyres) Each 14,22,000
66 Welding set Each 48,000
67 Winch 35 hp electric Each 3,75,000
68 Hydraulic Truck Crane 30T Each 1,44,84,250
tyres and tubes 6 sets 1,85,220
69 Hydraulic Truck Crane 16T Each 1,03,90,875
265
S. Rate
Sl for
No: DESCRIPTION OF MACHINERY / EQUIPMENT UNIT 2014-15
1 2 3 4
tyres and tubes 6 sets 1,85,220
70 Heavy Duty Airless Spray Painting Equipment Each 4,87,770
ACCESSORIES TO MACHINERY / EQUIPMENT FOR THE YEAR : 2014-15

S Rate
2014-15
1 2 3 4
1 Casing shoe bit
Each 10,500
2 Diamond core bit BX size
Each 10,600
3 Diamond core bit NX size
Each 12,720
4 Double tube core barrel
Each 13,568
5 Extension drill rod with coupling sleeve
Rm 2120
6 Jack hammer drill rod 1.5 m
Each 4028
7 Jack hammer drill rod 2.5 m
Each 6254
8 Nozzle for Guniting / sand blasting gun
Each 700
9 Paving Cylinder
Each 28,080
10 Rails 30R ( 30 kg / m )
tonne 51,500
11 Reamer shell
Each 5150
12 T.C. Cross bit 50 mm dia
Each 5000
Each 10,000
Each 12,000
15 Tyres and Tubes for truck Set 18,000
16 Wire rope 16 mm dia
Rm 265
17 Excavation of drain with Excavator
cum 35
266
AGGREGATE CRUSHING & PROCESSING PLANT

S Rate
Sl
No.
2014-15
1 2 3 4
1 Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp motor Each
2 Jaw crusher 500 x 300 mm ( 60 tph ) with 30 hp motor Each
3 Jaw crusher 400 x 225 mm ( 10 tph ) with 25 hp motor Each These items are
no where being
4 Jaw plates 900 x 500 mm ( serreted ) Set used in the
Standard Data.
5 Jaw plates 500 x 300 mm ( serreted ) Set Hence this may
6 Jaw plates 400 x 225 mm ( serreted ) Set be deleted
from SoR
7 Nylon Conveyor belt 3 ply 600 mm width Rm
8 Nylon Conveyor belt 3 ply 1000 mm width Rm
OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT FOR THE YEAR : 2014-15
1 The rate provided for ' SUNDRIES' (Lump sum provision for unquantified inputs in the data
rates) shall be updated on the basis of general percentage increase / decrease in the market rates or on
the basis of R.B.I ' All Commodity' index.
2 The rate for structural steel fabrication shall include cost of all materials (except
structural steel), machinery, labour and one coat of primer painting.
3 Demand charges and electric power charges shall be as per prevailing APCPDCL tariff.
4 Rate of interest on capital cost shall be as approved by Govt or other competent authority.
S Rate
Sl for
No. DESCRIPTION OF MATERIAL UNIT
2014-15
1 2 3 4
1 Air hose 25 mm dia Rm
175
Air hose 50 mm dia Rm
2 298
Demand charges (HT-I : General-11 KVA category) KVA /
3 on power supply month 350
Diesel Ltr
4 62
Electric power (HT-VIII Category) including tax (1.5
5
times of the Tariff of HT-I(A): General-11 KVA Kwhr
category) 8.5
Excise duty on Gates / Hoist supplies %
6 0%
Insurance charges on machinery % / annum
7 1%
Interest on capital cost % / annum
8 11.00%
267
Conveyance Charges of Material – Common SoR 2014-15
S Rate
Sl for
No. DESCRIPTION OF MATERIAL UNIT
2014-15
1 2 3 4
Lubricants Ltr
9 275
Petrol Ltr
10 78
Rivets Kg
11 100
Road tax on transport vehicles Rs./annum
12 18,132
Shalimastic sealing compound Kg
13 94
Shutter oil Ltr
14 78
Structural steel fabrication Kg
15 24
Sundries ( Lump sum for un quantified inputs ) LS
16 41
Water hose ( pressure ) 20 mm dia Rm
17 219
Steel wedges LS
18 16
19 Elbows / Nipple / Plugs etc., LS
17
20 Soldering materials LS
17
21 Steam circulation arrangement LS
17
22 Fuel charges ( gas for heating ) LS
17
23 Vulcanizing materials LS
17
24 Other accessories / controls / junctions LS
deleted
25 Miscellaneous fittings / switches etc LS
deleted
26 Anchors / supports for cables / lights LS
deleted
27 Civil works for foundations / pedestals / duct etc LS
deleted
28 Gas cutting set ( 2 No’s 15 m hose and nozzle unit ) Each
14,203
29 Grease Kg
260
Welding holder set ( cable / holder / gloves / mask
30 Each 7350
etc )
31 Use rate of ropes LS
150
268
MATERIALS FOR GATES AND HOISTS FOR THE YEAR : 2014-15
S Rate
for
Sl No. DESCRIPTION OF MATERIAL UNIT
2014-15
1 Worm reducers
Each 224400
2 Electric motor 20 hp(Double Shaft) Each 121000
3 Electric motor 17.5 hp(Double Shaft) Each 85,800
4 Electric motor 12.5 hp(Double Shaft) Each 72,600
Each
5 Electric motor 5 hp(Double Shaft) 33,000
6 Electric motor 3 hp (Double Shaft) Each
23,100
7 Electric motor 2 hp (Double Shaft)
Each 12100
8 Floating shaft 300 mm dia
Kg 180
9 Manual operating system
Each 28,820
10 Gate position indicator
Each 195800
11 Ele-magnetic brake
Each 35,200
12 Electric cable / switch / control panel etc
LS 50,380
13 Wire rope sockets
Each 4,620
269
Materials other than covered under irrigation

For the year
2014-15
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, is the criteria for Fixing
market rates for materials.
2 The rates for materials is inclusive of all taxes, duties and other local levies.
3 The rates for materials are exclusive of Seigniorage charges wherever applicable.
4 The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
S.
Sl. No. Description Unit Rate
f
1 2 3 o4
Quarried stone 150 - 200 mm size for Hand Broken
M-002 (Excluding Seigniorage charges) Cum 147
Boulder with minimum size of 300 mm for Pitching
M-003 (Excluding Seigniorage charges) Cum 164
Coarse sand for filling (Excluding Seigniorage Rate as per item
M-004 charges) Cum no.27(b) of material
of I&CAD
Coarse sand for mortar(Excluding Seigniorage Rate as per item
M-005 charges) Cum no.27(a) of material
of I&CAD
Rate as per item
M-006 Fine Sand (Excluding Seigniorage charges) Cum no.28 of material of
I&CAD
Rate as per item
M-007 Murum (Excluding Seigniorage charges) Cum no.56 of Material
rates of I&CAD.
M-008 Gravel/Quarry spall(Excluding Seinorage Charges) Cum
103
M-009 Granular Material or hard murum for GSB works Cum
Deleted
Granular Material or hard murum for GSB
M-010 works(Excluding Seigniorage charges) Cum 92
M-011 Fly ash conforming to IS: 3812 ( Part II & I) Cum
72
270
For item No.M-012 to M-055 the note shall be as

follows
1) The rates mentioned are exclusive of Seigniorage
charges but inclusive of blasting charges of Rs.70/cum
and 25% machine crushing charges. However, if the
metal is obtained by hand broken, machine crushing
charges shall be deducted.
2) If the material is obtained by hand broken from surface
boulders/canal spoil, the blasting and crushing charges
shall be deducted.
3)The material shall be HB Stone of Granite,
Dolamite, Dolerite and Trap.(Quartzite and Basalt
with aggregate impact of less than 20)
Filter media/Filter Material as per Table 300-3 (MoRT&H

M-012 Specification) (excluding Seiniorage Cum 345
Charges)
Close graded Granular sub-base Material 53 mm to
667
M-013 9.5 mm (excluding Seinorage Charges) Cum
Close graded Granular sub-base Material 37.5 mm to 9.5
685
M-014 mm (excluding Seinorage Charges) Cum
711
592
582
Close graded Granular sub-base Material 4.75mm to 2.36
510
Close graded Granular sub-base Material 4.75mm to 75
489
M-019 micron mm((excluding Seinorage Charges) cum
Close graded Granular sub-base Material 2.36 mm
489
M-020 (excluding Seinorage Charges) Cum
Stone crusher dust finer than 3mm with not more than
M-021 10% passing 0.075 sieve. (excluding Seinorage Cum 357
Charges)
Coarse graded Granular sub-base Material 2.36 mm &
438
M-022 below (excluding Seinorage Charges) Cum
Coarse graded Granular sub-base Material 4.75mm to 75
474
M-023 micron mm (excluding Seinorage Charges) cum
Coarse graded Granular sub-base Material 4.75 mm to
474
561
619
620
685
271
Coarse graded Granular sub-base Material 53 mm to 26

850
M-029 .5mm (excluding Seinorage Charges) Cum
Aggregates below 5.6 mm(excluding Seiniorage
557
M-030 Charges) Cum
Aggregates 22.4 mm to 2.36 mm (excluding
914
M-031 Seiniorage Charges) Cum
1040
M-032 Seiniorage Charges) Cum
Aggregates 45 mm to 2.8 mm (excluding Seiniorage
667
M-033 Charges) Cum
Rate as per item
M-034 Aggregates 45 mm to 22.4 mm (excluding Cum no.9 of Material
Seiniorage Charges) rates of I&CAD.
M-035 Charges) Cum 914
Aggregates 53 mm to 22.4 mm (excluding
M-036 Seiniorage Charges) Cum 872
Aggregates 63 mm to 45 mm (excluding Seiniorage
Rate as per item
M-039 Aggregates 90 mm to 45 mm (excluding Seiniorage Cum no.10 of Material
Charges) rates of I&CAD.
Rate as per item
Aggregates 13.2 mm to 0.09 mm(excluding
Aggregates 13.2 mm to 10 mm(excluding
Rate as per item
Aggregates 6 mm nominal size(excluding
272
Aggregates 13.2/12.5 mm nominal size(excluding

M-056 AC pipe 100 mm dia Metre Rate as per PH item
M-057 Acrylic polymer bonding coat Litre
474
M-058 Aluminum Paint Litre
330
M-059 Aluminum alloy plate 2mm Thick Sqm
381
M-060 Aluminum alloy/Galvanized steel Tone
70,931
Aluminum sheeting fixed with encapsulated lens type
reflective sheeting including 2% towards lettering,
M-061 cost of angle iron, cost of drilling holes, nuts, bolts etc. Sqm
and signs as applicable 968
Aluminum studs 100 x 100 mm fitted with lens As per local market
M-062 reflectors No’s rate
M-063 Barbed wire K
g 80
M-064 Bearing (Cost of parts) No’s
570
Bearing (Cast steel rocker bearing assembly of 250
M-065 tonne ) No’s 785
Bearing (Elastomeric bearing assembly consisting of
7 internal layers of elastomer bonded to 6 nos. internal
M-066 reinforcing steel laminates by the process of Cm3
vulcanization,)
M-067 Bearing (Forged steel roller bearing of 250 tonne) No’s
Bearing (Pot type bearing assembly consisting of a

As per Market
metal piston supported by a disc, PTFE pads providing
Competitive rates.
sliding surfaces against stainless steel mating together
M-068 with cast steel assemblies/fabricated structural steel No’s
assemblies duly painted with all components
Bearing (PTFE sliding plate bearing assembly of 80
M-069 tonnes ) No’s
M-070 Bearing (Supply of sliding plate bearing of 80 tonne) No’s
M-071 Bentonite Kg
7.5
Rate as per item
M-072 Binding wire Kg no.3 of Material
rates of I&CAD.
M-073 Bitumen ( Cationic Emulsion ) Tone
M-074 Bitumen (60-70 grade)(Excluding taxes) Tone As per rates fixed by
M-075 Bitumen (80-100 grade ) (Excluding taxes) Tone R&B Dept based on
refinery rates
273
S. Rate
Sl. No. D Unit for
es 2014-15
1 cr 2 3 4
M-076 Bitumen (Cutback ) Tone As per rates fixed by R&B
Dept based on refinery
M-077 Bitumen (emulsion)(Excluding taxes) Tone rates
M-078 Bitumen (modified graded) Tone
M-079 Brick Each As per Building SSR

M-080 C.I. shoes for the pile Kg
54
M-081 Cement Tone Rate as per item no.5 of

Material rates of I&CAD.
M-082 Cold twisted bars (HYSD/TMT Bars) Tone Rate as per item no.62 of
Material rates of I&CAD
M-083 Collar for joints 300 mm dia No’s
165
M-084 Compressible Fibre Board(20mm thick) Sqm
541
M-085 Connectors/ Staples Each
82
M-086 Copper Plate(12m long x 250mmwide) Kg
536
M-087 Corrosion resistant Structural steel Tone
59,225
Corrugated sheet, 3 mm thick, "Tie" beam
M-088 section Kg 206
M-089 railing for excavated rock found suitable for use
Credit Cum
194
M-090 Curing compound Liter 130
M-091 Delineators from ISI certified firm as per the Each As per local competitive
standard drawing given in IRC - 79 quotations
Earth Cost or compensation for earth taken
M-092 from Cum 40
private land(Excluding
Elastomeric Seigniorage
slab seal expansion jointCharges)
assembly
manufactured by using chloroprene,
M-093 elastomer for elastomeric slab unit Metre As per local competitive
conforming to clause 915.1 of IRC: 83 (part quotations
II),
Electric Detonators @ 1 detonator for 1/2 Rate as per item No. 21 of
M-094 gelatin stick 100 no’s I&CAD
of 125 gms
Epoxy each
compound with accessories for
M-095 preparing Kg 361
M-096 epoxy
Epoxy mortar Kg
118
M-097 Epoxy primer Kg
613
M-098 Epoxy resin-hardner mix for prime coat Kg
633
274
M-099 Flag of red color cloth 600 x 600 mm Each

25
M-100 Flowering Plants Each
40
M-101 Galvanized MS flat clamp No’s
195
Galvanized steel wire crates of mesh size 100
M-102 mm x Sqm
100 mm woven with 4mm dia. GI wire in 180
rolls of required
Galvanized size. steel plate 200 mm wide,
structural
M-103 6 mm Kg 932
M-104 thick, 2480%
Gelatin m long Kg
73
M-105 Geo grids Sqm As per local competitive
quotations
M-106 (a)Geo membrane 500 micron thick Sqm Rate as per item No. 52 of
I&CAD
(b) Geo membrane 750 micron thick Sqm Rate as per item No. 53 of
I&CAD
(c) Geo membrane 1000 micron thick Sqm Rate as per item No. 54 of
I&CAD
M-107 Geo nets Sqm As per local competitive
quotations
M-108 (a)Geo textile 160 gsm Sqm Rate as per item No. 29 of
I&CAD
(b) Geo textile 200 gsm Sqm Rate as per item No. 30 of
I&CAD
(c) Geo textile 250 gsm Sqm Rate as per item No. 31 of
I&CAD
M-109 Geo textile filter fabric Sqm As per local competitive

quotations
M-110 GI bolt 10 mm Dia No’s
23
Rate covered in hire
M-111 Grouting pump with agitator Hour charges of machinery of
Irrigation items
Grass (Doob)
M-112 Kg 6
Grass (Fine)
M-113 Kg 8
M-114 HDPE pipes 75mm dia Metre
M-115 HDPE pipes 90mm dia Metre Rate as per PH items
M-116 Hedge plants Each
M-117 Helical pipes 600mm diameter Metre
Rate as per local
M-118 Hot applied thermoplastic compound Litre competitive quotations
M-119 HTS strand Tone
275
Sl. No. S. Rate

Descri Unit for
ption 2014-15
1 2 3 4
M-120 Joint Sealant Compound Kg Rate as per local
competitive quotations
Jute netting, open weave, 2.5 cm square opening
M-121 for Sqm 90
M-122 seeding and Mulching
LDO for steam curing Litre
65
M-123 M.S. Clamps Kg Deleted
M-124 M.S. Clamps Kg Rate as per local

M-125 M.S. shoes @ 35 Kg per pile of 15 m Kg Rate as per local

Mild Steel bars
M-126 Tone 46,865
Modular strip/box seal expansion joint including
anchorage catering to a horizontal movement
beyond 70 mm and up to 140mm assembly
Rate as per local
comprising of edge beams, central beam,2
modules chloroprene seal, anchorage elements,
M-127 support and control system, all steel sections Metre
protected against corrosion and installed by the
Modular strip/box seal expansion joint catering to
a horizontal movement beyond 140mm and up to
210mm box/box seal joint assembly containing 3
modules/cells and comprising of edge beams, two Rate as per local
central beams, chloroprene seal, anchorage competitive quotations
M-128 elements, support and control system, all steel Metre
sections protected against corrosion and installed
by the manufacturer or his authorized
M-129 Nipples 12mm
20
No’s
M-130 Nuts and bolts
Kg 100
M-131 Paint 255
M-132 Pavement Marking Paint Litre
Litre
M-133 Paving Fabric Sqm

Rate as per local
M-134 Perforated geo synthetic pipe 150 mm dia competitive quotations
Metre
Perforated pipe of cement concrete, internal dia
M-135 100 Metre
mm
Pesticide Rate as per local
M-136 Kg competitive quotations
276
S. Rate
Sl. No. Descripti Unit for
on 2014-15
1 2 3 4
quotations
R.C.C Pipes 200 mm dia, 2.5 m long for drainage

Rate as per PH item
M-137 Metre
Plastic sheath, 1.25 mm thick for dowel bars
M-138 Sqm
M-139 Plastic tubes 50 cm dia , 1.2 m high No’s
M-140 Polymer braids Metre Rate as per local

Pre moulded Joint filler, 25 mm thick for expansion
M-141 joint. Sqm
M-142 Pre-coated stone chips of 13.2 mm nominal size Cum
Preformed continuous chloroprene elastomer or

closed cell foam sealing element with high tear
strength, vulcanized in a single operation for the full Rate as per local
M-143 length of a joint to ensure water tightness. Metre competitive quotations
M-144 Pre-moulded asphalt filler board Sqm
Pre-packed cement based polymer concrete of

Rate as per local
M-145 strength 45 Mpa at 28 days Kg
M-146 Primer Kg As per Building SSR
As per local market
M-147 Quick setting compound Kg rate
Random Rubble Stone(Including Loading Charges
M-148 but excluding Seignorage Charges) Cum 252.00
RCC Pipe NP 4 heavy duty non pressure pipe 1000

M-149 mm dia Metre

Rate as per PH items
M-150 mm dia Metre
M-151 mm dia Metre
Reflectorising glass beads

M-152 Kg
Reinforcement strips 60 mm wide 5 mm thick as per
M-153 clause 3102. (Copper Strips) Metre
Rate as per local
M-154 clause 3102. (Galvanized carbon steel strips) Metre
M-155 clause 3102. (Glass reinforced polymer/ Metre
fiber reinforced polymer/polymeric strips)
277
S. Rate
Sl. No. Descri Unit for
ption 2014-15
1 2 3 4
M-156 Reinforcement strips 60 mm wide 5 mm thick as per Rate as per local
clause 3102. (Stainless steel strips) Metre competitive quotations
M-157 clause 3102. (Aluminum strips) Metre
M-158 Rivets Each 7.00
M-159 Sand bags (Cost of sand and Empty cement bag) No’s 18.00
M-160 Sapling 2 m high 25 mm dia Each Rate as per local
M-161 Scrap tyres of size 900 x 20 No’s
80.00
M-162 Seeds(Grass) Kg
18.00
Cost of Selected earth (Excluding Seignorage Rate as per Item No.
M-163 Charges) Cum M-092
Separation Membrane of impermeable plastic Rate as per local
M-164 sheeting 125 micron thick Sqm competitive quotations
M-165 Sheathing duct Metre Rate as per local
M-166 Shrubs Each 15.00
M-167 Sludge / Farm yard manure @ 0.18 cum per 100 Cum Rate as per local
sqm at site of work for turfing competitive quotations
M-168 Sodium vapour lamp Each As per Building SSR
Square Rubble Coursed Stone(Including Loading
2236.00
M-169 Charges but excluding Seigniorage charges) Cum
Steel circular hollow pole of standard specification Rate to be obtained
M-170 for Each from
street lighting to mount light at 5 m height above Electricity/Municipal
deck level
Steel circular hollow pole of standard specification Departments
M-171 for Each Rate to be obtained
street lighting to mount light at 9 m height above from
road level Electricity/Municipal
Departments
Steel drum 300 mm dia 1.2 m high/empty bitumen As per local
M-172 drum No’s competitive market
Steel helmet and cushion block on top of pile head rate
M-173 during driving. Kg As per local
M-174 Steel pipe 25 mm external dia as per IS:1239 Metre competitive market
288.00
M-175 Steel pipe 50 mm external dia as per IS:1239 Metre
561.00
M-176 Steel wire rope 20 mm Kg
185.00
M-177 Steel wire rope 40 mm Kg
211.00
M-178 Strip seal expansion join Metre Rate as per local
278
S. Rate
Sl. No. Descri Unit for
ption 2014-15
1 2 3 4
Rate as per item no.62
M-179 Structural Steel(HYSD/TMT bars) Tone of Material rates of
I&CAD
Super plasticizer admixture IS marked as per 9103- Rate as per item no.70
M-180 1999 Kg of Material rates of
I&CAD
M-181 Synthetic Geo grids as per clause 3102.8 Sqm Rate as per local
and approved design and specifications. competitive quotations
Through and bond stone Rate as per item no.75
M-182 (a) 20X20x30 to 45 cm long Each of Material rates of
I&CAD.
(b) 25X25x45 to 60 cm long Each of Material rates of
I&CAD.
(c) 30X30x65 to 75 cm long Each of Material rates of
I&CAD.
Tie rods 20mm diameter
M-183 No’s 54.00
M-184 Tiles size 300 x 300 mm and 25 mm thick Each
Timber As per Building SSR

M-185 Cum
Traffic cones with 150 mm reflective sleeve
Rate as per local
M-186 No’s
Tube anchorage set complete with bearing plate,
Rate as per local
M-187 permanent wedges etc No’s
Un slaked lime
M-188 Tonne 2616.00
M- Water charges(Urban)
189(a) KiloLitre 103
b) Water charges(Rural) KiloLitre 77

Water based cement paint
As per Building SSR
M-190 Litre
Welded steel wire fabric
M-191 Kg 155.00
Wire mesh 50mm x 50mm size of 3mm wire
M-192 Kg 252.00
M-193 Wooden ballies 2" Dia for bracing Each
As per Building SSR
M-194 Wooden ballies 8" Dia and 9 m long Each As per Building SSR
M-195 Wooden packing Cum 1265.00
M-196 Wooden staff for fastening of flag 25 mm dia, one m Each
long 75.00
279
Sl. No. S. Rate

Descri Unit for
ption 2014-15
1 2 3 4
Item 8.3 Printing new letter and figures of any shade (ii) per cm
English Roman height per
letter 1.60
Item 8.8 Painting Two Coats on New Concrete Surfaces
As per Building SSR
Sqm
As per Building SSR
Item 8.9 Painting angle iron post Two Coats Sqm
Miscellaneous Items
Benching old embankment slopes 0.45 X 0.45 M

1 RM 4.20
Laying Sand Bags in the stipulated places including
cost of empty cement bag, sand, thread,
stiching charges and labour charges with
2 14%overhead charges and contractors per bag
profits. 25.60
Rough stone for revetment 225mm thick ( including
3 Loading charges but excluding Seigniorage charges) Cum
144.00
Eradication of Weed growth from Drains, Canals by
4 spraying Chemicals Sqm
1.75
Thinner
5 Ltr 140.00
280
Conveyance
Charges of Material
281
CONVEYANCE CHARGES OF MATERIALS AS PER SoR 2014-15
(COMMON TO ALL DEPARTMENTS).
LEAD, LIFT, LOADING AND UNLOADING CHARGES FOR MATERIALS FOR THE YEAR: 2014-15
1. For total lead up to 150 m (including initial lead) lead charges by head load only shall be adopted
irrespective of mode of conveyance.
2. For total lead exceeding 150 m conveyance by mechanical means only shall be adopted
irrespective of mode of conveyance.
3. The rates for loading at quarry including idle hire charges of trucks and hire charges per
for each kilometer and up to 5 km are cumulative and inclusive of total charges for
Preceding lead.
4. Unless otherwise specified lead charges for Earth / Sand / Gravel / Aggregates and Stones are for
loose volume and not for compacted or in-situ volume.
5. The rates for lift charges, lead charges, hire charges are cumulative and inclusive of rates for
preceding lift, lead and hire charges.
6. Lift charges are not payable where conveyance of materials is by mechanical means to final
placing point.
7. Loading and unloading charges are not payable for conveyance by head load.
8. Loading charges are not payable for conveyance by mechanical means for disposal of
excavated materials beyond initial lead of 50 m wherever specified.
9. Loading and unloading charges are not payable for conveyance by mechanical means for
disposal of excavated materials beyond initial lead of 1 km wherever specified.
10. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble, size
stone and cut stone are inclusive of stacking.
11. Hire charges are per 1KM for tippers and trucks for transport of materials from work site to
dump yard and other places are cumulative& includes previous km up to 5 kms
12. The lead & lift charges are inclusive of contractor's profit and overhead charges of 14%
13. During the BoCE meeting held on 24-05-2014, it is observed that in some of the estimates, Lead
Charges are being added directly to the material basic rates for arriving the finished item rate. In view of
that, the BoCE has instructed to see that while arriving the finished item rate, the lead charges are to be
added to the material basic rates only after deducting the provision of "Contractor's Profit and
Overhead charges"
282
A. (LEAD) CONVEYANCE CHARGES FOR MATERIALS BY HEAD

LOAD FOR THE YEAR: 2014-15
Earth / Sand /Gravel PCC slab/
Cement /
/ Murrum/ Lime/ Shahbad slab /
Total distance Reinforce-
Surki/ Size stone / CC block/ BS
Sl No. ( Total lead includes initial ment steel
Cut stone Rubble / slab/ Late-rite /
lead ) Str steel
Coarse aggregate Wood Rs /
Rs / tonne
Rs/Cum cum
1 2 3 4 5
1 Total lead up to 50 m initial lead initial lead initial lead
(covered by item rate)
2 Total lead up to 100 m 48.00 28.00 61.10
3 Total lead up to 150 m 96.10 56.10 122.30
Notes: 1. No loading or unloading charges are admissible for conveyance by head load.
2. For total lead exceeding 150 m conveyance charges by mechanical means
only shall be adopted irrespective of mode of conveyance.
3.The lead & lift charges are inclusive of 14% Contractor Profit and
Over Head charges
B.( LEAD) CONVEYANCE CHARGES FOR MACHINERY PER KILOMETER FOR

TRANSPORTING MATERIALS BY TIPPERS AND TRUCKS EXCLUDING LOADING,
UNLOADING AND IDLE HIRE CHARGES OF MACHINERY
FOR THE YEAR: 2014-15
( No loading and unloading charges allowed for machinery loading and unloading )
(Lead)
(Lead) (Lead) (Lead)
charges (Lead)
charges for charges for charges for
for trucks charges
trucks and trucks and trucks and
and for
tippers for tippers for tippers per (Lead)
tippers for trucks
Earth / Cement/ cu.meter charges for
Rubble/Si and
Sl Sand Steel/ RCC for PCC trucks
Distance ze stones/ tippers
No. /Gravel poles/ AC slabs/ per 1000
Cut per
/ & GI Shahabad nos. of
Stones/ cu.met
Murru sheets/ slabs/ CC & bricks
Coarse er
m/ Packed Laterite
aggregate water/
Lime/ Surki/ materials/t blocks/
per 100litres
per cu.meter onne Wood/ cum
cu.meter
1 2 3 4 5 6 7 8
1 Lead up to 1 km 31.50 30.40 19.00 44.70 18.80 50.70
2 Lead up to 2 km 44.10 42.60 26.60 62.60 26.30 71.00
3 Lead up to 3 km 58.90 58.90 36.80 86.60 35.00 94.60
4 Lead up to 4 km 71.50 71.50 44.70 105.10 42.50 114.90
5 Lead up to 5 km 84.10 84.10 52.60 123.70 50.00 135.20
for Every km
6 beyond 5 km up 12.60 12.60 7.90 18.50 7.50 20.30
to
for Every km
10.50 10.50 6.60 15.50 6.30 16.90
7 beyond
Note: The lead & lift charges are inclusive of 14% Contractor Profit and Over Head charges
283
C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS ( idle hire charges

of trucks are not added)
Earth / Rubble/ size
Sand stone/ cut
stone/
/Gravel brick
Coarse
work
Murrum/ aggregate, cement in steel in
/ Surki/ Rs/1000
Sl No. Description of item Lime in
1 2 3 4 Rs/tonne
5 Rs./tonne
6 7
1 Loading 16.00 32.00 52.80 63.30 44.00
2 Unloading 8.00 16.00 52.80 63.30 44.00
D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (including idle

hire charges of trucks)
Rubble/ size
Earth /
stone/ cut
Sand brick
stone/
/Gravel cement in steel in work
Coarse
Sl No. Description of item Murrum/ / Rs/tonne Rs./tonne Rs/1000
aggregate,
Surki/ No
Lime in
Rs / cum
Rs/cum
1 2 3 4 5 6 7
1 Loading 108.20 124.20 154.20 164.70 211.30
2 Unloading 38.60 62.10 154.20 164.70 211.30
Note: The lead & lift charges are inclusive of 14% Contractor Profit and Over Head charges.
E.LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS (including idle hire

charges of trucks)
Earth / Rubble/ size

Sand stone/ cut
/Gravel stone/
Sl No. Description of item Murrum/ / Coarse
Surki/ aggregate,
Lime in
Rs / cum Rs/cum
1 2 3 4
1 Loading 52.50 105.00
2 Unloading 15.90 15.90
284
F. LIFT CHARGES FOR MATERIALS BY HEAD LOAD
Earth / Sand
/Gravel Murrum/ PCC slab/
Cement /
Total lift Lime/ Surki/ Shahbad
Reinforce-
Sl ( Total lift includes Size stone / Cut slab / CC
ment steel
No. initial lift ) stone block/ BS
Str steel
Rubble / Coarse slab / Laterite
Rs / tonne
aggregate / Wood
Rs / cum Rs / cum
1 2 3 4 5
Total lift up to 3 m
1 (covered by item rate) Initial lift Initial lift Initial lift
For Every 1.00 Lift
beyond initial lift of 3
meters 5.60 4.10 7.50
285
HIRE CHARGES
286
HIRE CHARGES OF PLANT & MACHINERY FOR THE YEAR : 2014-15
Hire Fuel Crew Total in

Sl. charge in charge in Charge Rs
Description of machinery Unit
No Rs Rs in Rs.
1 2 3 4 5 6 7
1 Agitator car / Transit mixer 2 cum Hour 758.40 937.80 244.90 1941.10
2 Air compressor 5 cmm ( electric ) Hour 108.30 256.80 142.40 507.50
3 Air compressor 7 cmm ( diesel ) Hour 241.30 767.30 182.20 1190.80
4 Air compressor 7 cmm ( electric ) Hour 131.90 342.40 142.40 616.70
5 Air compressor 8.5 cmm ( diesel) Hour 275.60 959.10 182.20 1416.90
6 Air compressor 8.5 cmm ( electric) Hour 170.80 428.00 142.40 741.20
7 Air compressor 15 cmm ( electric) Hour 138.80 951.20 151.80 1241.80
8 Angle Dozer 90 hp Hour 1715.50 656.00 204.10 2575.60
9 Batching plant 0.5 cum ( 6 Cum/hr) Hour 114.60 114.10 293.80 522.50
Batching plant 2 x 1.00 cum
10 (15 Cum/hr) Hour 405.40 342.40 293.80 1041.60
Batching plant 2 x 1.50 cum
11 ( 50 Cum/hr) Hour 518.10 418.50 293.80 1230.40
12 Bending machine 3000 x 12 mm Hour 42.60 114.10 113.90 270.60
13 Clamp shell and hoisting ropes Hour 5.40 0.00 0.00 5.40
14 Concrete bucket 1.5 cum Hour 15.80 0.00 0.00 15.80
15 Concrete hand mixer 45 / 30 ltr Hour 5.50 0.00 0.00 5.50
16 Concrete mixer 300 / 200 ( diesel) Hour 53.50 85.30 189.80 328.60
Concrete mixer 300 / 200 ltr
17 ( electric) Hour 51.70 38.00 189.80 279.50
18 Concrete mixer 600 / 400 ( diesel) Hour 92.70 170.50 189.80 453.00
19 Concrete mixer 600 / 400 ltr
( electric) Hour 91.00 76.10 189.80 356.90
20 Concrete paver 100 sqm / hr Hour 356.50 0.00 364.40 720.90
21 Convey mucker Hour 822.80 264.80 151.80 1239.40
22 Core drilling machine Hour 319.00 255.80 244.90 819.70
23 Diesel generating set 30 KVA Hour 65.80 682.00 113.90 861.70
Diesel generating set 50 KVA 85.10 1023.00 113.90 1222.00
24 Hour
25 Hour 381.60 575.40 142.40 1099.40
Diesel Loco 45 hp
26 Dewatering pump 5 hp ( diesel ) Hour 10.20 85.30 96.10 191.60
27 Dewatering pump 5 hp ( electric ) Hour 3.00 38.00 72.10 113.10
28 Dewatering pump 10 hp ( diesel Hour 15.20 170.50 96.10 281.80
287
Hire Fuel Crew
Sl. charge in charge in Charge Total in Rs
No Description of machinery Unit
Rs Rs in Rs.
1 2 3 4 5 6 7
29 Dewatering pump 10 hp ( Hour 6.70 76.10 72.10 154.90
Dewatering pump 20 hp ( diesel 48.30 341.00 96.10 485.40
30 Hour
31 )Dewatering pump 20 hp ( Hour 12.30 152.20 72.10 236.60
32 electric Hour
Drifter 322.70 0.00 306.20 628.90
33 Drilling jumbo Hour 368.40 46.00 151.80 566.20
34 Dumper 4.5 cum Hour 580.70 429.70 195.90 1206.30
35 Geophysical Electric resistivity Hour 99.00 0.00 0.00 99.00
Grouting pump 24.90 38.00 227.80 290.70
36 Hour
37 Guniting / sand blast equipment Hour 110.10 0.00 189.80 299.90
38 Hour 170.20 1084.30 113.90 1368.40
Ice plant & accessories 30 t / day
39 Jack hammer Hour 19.80 0.00 284.70 304.50
40 Needle vibrator 40 mm ( petrol ) Hour 7.60 21.50 136.60 165.70
41 Needle vibrator 40 mm ( electric Hour 8.00 7.60 136.60 152.20
Needle vibrator 60 mm ( petrol ) 8.20 32.20 136.60 177.00
42 Hour
43 Needle vibrator 60 mm ( electric Hour 9.70 11.40 136.60 157.70
44 ) Hour
Planing machine 4 m stroke 117.80 114.10 182.20 414.10
45 Plate shearing machine up to 12 Hour 41.90 152.20 122.50 316.60
46 Pneumatic placer 0.5 cum Hour 171.10 0.00 75.10 246.20
47 Pneumatic tamper Hour 20.70 0.00 227.80 248.50
Pug cutting machine 6.40 3.80 0.00 10.20
48 Hour
49 Pusher leg Hour 12.70 0.00 0.00 12.70
50 Hour 197.20 767.30 182.20 1146.70
Road roller diesel 10 t
51 Shovel 0.50 cum 75 hp Hour 1003.10 511.50 204.10 1718.70
52 Shovel 0.85 cum 110 hp Hour 1706.60 937.80 204.10 2848.50
53 Stationery derrick crane Hour 86.10 0.00 0.00 86.10
Tipper 5 cum 446.70 322.20 153.10 922.00
54 Hour
55 Tipping tub 1.5 cum Hour 64.20 0.00 0.00 64.20
56 Hour 867.10 197.80 163.30 1228.20
Tower crane 5 tonne
57 Transformer 250 KVA Hour 5041.00 0.00 0.00 5041.00
58 Truck 10 t Hour 414.10 322.20 153.10 889.40
59 Truck mounted derrick crane 5 t Hour 519.70 322.20 153.10 995.00
60 Upright drilling machine/grinder Hour 22.50 38.00 171.60 232.10
61 Ventilation fan 20 hp Hour 11.50 152.20 24.90 188.60
288
Hire Fuel Crew
Sl.
Description of machinery charge in charge in Charge Total in Rs
No Unit
Rs Rs in Rs.
62 Vibratory pad foot roller 8 t Hour 1342.20 1108.30 227.80 2678.30
Wagon drill 188.50 0.00 244.90 433.40
63 Hour
64 Water tanker 8000 ltr Hour 402.50 322.20 153.10 877.80
65 Hour 16.00 91.30 0.00 107.30
Welding set
66 Winch 35 hp ( electric ) Hour 129.40 186.40 227.80 543.60
67 Tractor with 2 T roller Hour 345.00
68 Hydraulic Truck Crane 30T Hour 3096.80 118.80 454.30 3669.90
Hydraulic Truck Crane 16T 2278.10 75.00 454.30 2807.40
69 Hour
70 Heavy Duty Airless Spray Painting Hour
121.40 121.40
Equipment
289
PUBLIC HEALTH ITEMS
290
PUBLIC HEALTH ITEMS
Sl. Description Unit SoR for
No. 2014-15
1 2 3 4
1 RATES OF LABOUR (SKILLED WORKMEN)
1. Caulkar Per Day
2. Plumber 1st Class Per Day
3. Plumber 2nd Class Per Day
4. Sewer Cleaner Per Day As per
5. Well Sinker Per Day Labour rates
of SoR
6. Pipe line Fitter 1st Class Per Day
7. Pipe line Fitter 2nd Class Per Day
8. Pump Operator Per Day
9. Bore Mechanic Per Day
10. Light Vehicle Driver Per Day
Note:The rate at relevant item in common SoR is applicable for occasional employment.
2 RATES FOR EARTH WORK :

a. Earth work excavation in all types soils for pipe lines, for drainage and water supply, To follow the
where the depth is more than 1.5 times the width. relvent items of
b. Earth work excavation in all types soils for pipe lines, for drainage and water supply, Irrigation work
where the depth is less than 1.5 times the width. items as per
Earth work excavation in all types soils for open trenches, for valve pits, inspection AP.Standard
c.
chambers, etc. data
3. a. Excavation of pipe line trenches for drainage and water supply in rock requiring
blasting with initial lead and lift including cost of blasting materials where the depth is
more than 1.5 times the width, in places where there is no habitation.
b. Excavation of pipe line trenches for drainage and water supply in rock requiring
blasting with initial lead and lift including cost of blasting materials where the depth is
less than 1.5 times the width, in places where there is no habitation.
c. Cutting rock for pipe line trenches by hammers, nuckles and chisels including
stacking where the depth is 1.5 times or more than the width.
d. Cutting rock for pipe line trenches by hammers, nuckles and chisels including
stacking where the depth is less than 1.5 times the width.
e. Cutting rock for works other than pipe lines trenches by hammers, nuckles and chisels
including stacking.
f. For contolled blasting at restricted places

NOTE :- Rock should be measured in solids. In case it is not possible, stacks should
be made in which case 40% for voids to be deducted from the stack measurements.
4 Loading or unloading materials such as C.I. Pipes, PVC Pipes, AC Pressure Pipes, DI
Pipes, SW Pipes, PVC Pipes, A.C/Specials less than 300 mm dia upto 4 m in length
including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as

b. A.C. Pipes & Specials Per Tonne per AP.Standard
c. Stoneware pipes & Specials Per Tonne
291
Sl. SoR for
Description Unit 2014-15
No.
1 2 3 4
d. P.V.C. Pipes and fittings Per data
5 Loading or unloading materials such as C.I. Pipes, DI pipes, SW pipes, AC pressure pipes &
fittings/ specials from 300 mm to 600 mm dia upto 4 m in length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per To follow as per
b. A.C. Pipes & Specials Per AP.Standard data
c. Stoneware pipes & Specials Per

Loading or unloading materials such as C.I. Pipes, DI pipes, PVC pipes, AC pipes less than 300 Tonne
6
mm dia, above 4 m in length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per To follow as per

b. A.C. Pipes & Specials Per AP.Standard data
c. P.V.C. Pipes and fittings Per

7 Loading or unloading materials such as C.I. Pipes, DI pipes, AC pipes from 300 mm to 600 mm Tonne To follow as per
above 4 m in length including stacking. AP.Standard data
a. C.I. Pipes/D.I. Pipes and fittings Per

b. A.C. Pipes & Specials Per
Note:- For loading and unloading the above materials at Railway Stations, the rates may be
adopted based on the competitive quotations or the hammalae charges if prevailing.
8. Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into To follow as per
a. trenches and laying them true to alignment and gradient including all sundries but excluding AP.Standard data
cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
Diameter of Pipe/Fittings in mm :
80mm to 1000mm dia Per
8. Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with flanged ends carefully into
b. trench and laying them true to alignment and gradient including all sundries but excluding
cost and conveyance of pipes from source of supply. (Reference to specifications. BIS
No.3114/1994)
80mm to 750mm dia To follow as per
AP.Standard data
800mm dia Per 482.00

900mm dia Per 626.00
1000mm dia Per 814.00
1100mm dia Per 1003.00
1200mm dia Per 1192.00
9. Jointing CI /DI pipes & fittings with s/s ends including cost of pig lead, Spun yarn and
a. sundries such as cost of fuel for melting lead, filling with water with lead up to 500m and
testing to required pressure complete. (Reference to specifications. BIS No.3114/94/12288:1997)
80mm to 800mm To follow as per
AP.Standard data
900mm dia Each 13852.00

1000mm dia Each 15475.00
Joint
No. 2014-15
1 2 3 4
1100mm dia Each Joint 17097.00
9. b. Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost
of the gasket but including all sundries filling with water, with a water lead up to 500m
and testing to required pressure, etc. complete (Reference to specifications IS To follow as
3114/1994/12888/1997) per AP.Standard
Diameter of Pipe/Fittings in mm : data
80mm to 1000mm dia Each Joint
10 Jointing CI pipes, fittings and valves with flanged ends including cost of jointing
materials such as bolts, rubber insertion, white lead including filling with water, with
lead up to 500 meters and testing to required pressure complete. (Reference to
specifications. BIS No.3114/1994.) To follow as
Diameter of pipe/Fittings/ valve in mm : per AP.Standard
data
80mm to 750mm dia Each Joint
11a Lowering the RCC plain ended pipes carefully into the trench laying them true to
alignment and gradient, jointing RCC pipes with cement joints including curing, the cost
of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including
filling with water with a water lead upto 500 metres excluding cost of rubber rings as per
BIS No.783/85.
per every 25 mm dia. Per Metre 18.00
11b Lowering the RCC S/S pipes carefully into the ready made trenches laying them true to
alignment and gradient, jointing with rubber rings and testing including filling with water
with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 To follow as
per
per every 25 mm dia. Per Metre AP.Standard
80mm to 600mm data
700mm dia 292.00
800mm dia 350.00
900mm dia 420.00
1000mm dia 503.00
12 Lowering and Jointing G.I. pipes and specials / fittings including excavation of trench of
0.5m width and 0.50 m depth in all soils except rock requiring blasting and refilling
trenches after laying and jointing pipes and also including cost of jointing materials but To follow as
excluding the cost of pipes. Reference to specifications. BIS No.783/85 per
AP.Standard
a G.I. Pipes :Dia in mm data
15mm to 150mm Per Metre
No. 2014-15
1 2 3 4
b Laying, jointing of PVC/HDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS
No.7634 part-II/75 for HDPE pipes including trench excavtion and refiling.
Dia in mm
20mm dia Per Metre 24.00
Note:(i) The above rates are applicable for the works in District only.
(ii) If the depth of excavation is more than 0.5 m separate rates to be worked out.
13 Lowering and laying in ready made trench true to alignment and gradient, jointing, and To follow as
testing of Stone ware pipes including cost of jointing material such as cement mortar per AP.
(1:1) proportion and hemp yarn but excluding cost and conveyance of pipe. (Reference to Standard data
specifications BIS No. 6530/72)
Dia of Pipes in mm .
14 Lowering, laying, jointing and testing to hydralic test pressure including cost of water with To follow as
minimum water lead of 500m for UPVC pressure pipes in ready made trenches true to per AP.
alignment and gradient including all sundries but excluding cost & conveyance of pipes Standard data
from source of supply and jointing materials as per BIS No. 7634 - Part III - 1975
Dia of Pipes in mm .
15 Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as
amended from time to time to the alignment and gradient and testing the pipeline to the
required pressure.
Outer Dia of pipes in MM

63mm dia OD Per Metre 35.00
4
No. 2014-15
1 2 3 4
16 Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & To follow as
Reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces per AP.
Standard data
Dia of Valve in mm.
80mm to 450mm Each
17 Labour charges for fixing Air valves including boring the mains and threading the
bore fixing nipple etc., complete. To follow as
Dia of Air valve in mm. per AP.Standard
data
25mm dia Each
40mm dia Each
50mm dia Each 150.00
18 Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air
valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and
rubber insertions etc., complete.
Dia of Air valve in mm.
50mm dia (Double Air valves) Each 171.00
19 Uprooting C.I./ DI Pipes by melting the lead, loosening the joints, scraping the pipes,
hoisting and keeping within a lead of 10 m but excluding earth work excavation and To follow as
refilling. per AP.
Per Metre Standard data
80mm to 600mm
20 Uprooting of RCC pipes including breaking the collars, loosening the joint, seperating the
pipes, hoisting and keeping within a lead of 10 m but excluding earthwork excavation and Per Metre To follow as
refilling. per AP.
100mm to 300mm Standard data
21 Removing old G.I.pipes and specials / fittings and cleaning, scraping the pipes,
hoisting and keeping with in 50m lead but excluding earth work excavation of To follow as
trenches and refilling. per AP.Standard
data
Dia of Pipes in mm
22 Cutting C.I./ DI Pipes without water in mains.Dia of pipes in mm.
Dia of Pipes in mm To follow as
per AP.Standard
80mm to 600mm Each cut
data
680mm dia Each cut 442.00
No. 2014-15
1 2 3 4
23 Cutting A.C. Pipes without water in mains.Dia of pipes in mm. Each cut
Dia of Pipes in mm
24 Drilling and tapping CI/ DI / GI Main and fixing brass screw down ferrule and plug. To follow as
Each Tapping per AP.
10 mm to 20mm
Standard data
25 mm to 40mm Each Tapping
25 Cutting road surface including stacking of excavated materials for pipe line trench work.
a) Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) 596.00
including water bound macadam 10 Sqm
b) Cutting open C.C. road surface 1 Cum 1656.00
c) Cutting open water bound macadam road including soiling 1 Cum 204.00
26 Bailing out water.(For PH item)

a) Bailing out water from the pipe line trenches with oil engine driven pumpsets, HP/Hour 48.00
including hire charges, fuel charges and wages for Driver and Helper.
b) Bailing out water from the pipe line trenches with Electric Driven pumpset including HP/Hour 35.00
hire charges, current charges and wages for Driver and Helper.
NOTE:- The rate is payable on the total H.P. hours ignoring fractions less than 0.5 HP
hour and rounding off 0.5 HP hour or more to the next higher integer.
27 Shoring and strutting of trenches for water and sewer main.
a) Single Staging from (0 to 2.5 Mts.) 1 Sqm of To follow as
Shoring area per AP.
b) Double staging from (2.5 m to 4.5 Mts.) 1 Sqm of
Standard data
Shoring area
No. 2014-15
1 2 3 4
28 Barricading, hoarding, lighting and watching etc., for water supply and sewerage To follow as
works for trenches. 1 RMT
per AP. Standard
data
29 Excavation of trenches for infiltration galleries, syphon lines and connecting mains in all
soils under water including all leads, lifts, shoring, strutting, bailing out water and
removal of shoring and strutting materials, after completion of pipe line work.
a) 0 to 1 m deep under water. 10 Cum 10610.00
b) 1 to 2 m deep under water. 10 Cum 15197.00
c) 2 to 5 m deep under water. 10 Cum 22811.00
d) Beyond 5 m deep under water for every additional 1 m depth over item 'c' 10 Cum 4358.00
NOTE:- The above rates do not include rock requiring blasting or chiselling
30 Laying and jointing perforated RCC pipes inclusive of bailing out water and jointing with
cement fillets and all other incidental charges for infiltration gallery inclusive of bailing
out water by pumping to keep the trench reasonably dry to facilitate the work excluding Per Metre 33.00
cost of perforated pipes and collars.
per every 25 mm dia.
31 Centring and scaffolding charges for RCC members including all materials and labour
charges for forming and dismantling.
a) for R C C Elevated Service Reservoir of staging up to 15 metre below L W L.
1) Slabs for thickness (150 mm to 300 mm) One Sqm of 2964.00

2) Slabs for thickness above (300 mm) Centering 5925.00
area
3) Side walls curved surfaces. 2239.00
4) Side wall straight surfaces. 1993.00
5) Dome. 2427.00
6) Roof Slab. 1494.00
7) Column braces and beams 999.00
8) Circular braces, ring beams & circular column. 1096.00
Note:- For RCC ELSR of staging above 15 m, the % increse in these rates
shall be as follows.
15-18 m ---- 9%
18-21m --- 15%
21-24 m --- 21%
24 m -27m --27% above27m
---- 30%
b) For Ground level works :-

1) Slabs 1 Sqm To follow as
per AP.Standard
2) Beams & Lintels 1 Cum
data
3) Sun shades 1 Sqm
No. 2014-15
1 2 3 4
4) RCC vertical walls of plane surface 1 Sqm of 796.00
centering area
5) RCC vertical walls of circular faces 1 Sqm of 1014.00
centering area
NOTE: Scaffolding for every extra height of 1 m or part thereof but not less than 0.5
m.The above centering charges are applicable for water retaining structures only.
32 Lift or delift of materials :
a) Lifting of cement concrete for RCC elevated reservoir. For every 1m height or part
thereof over the initial lift of 3 m 1 Cum 122.00
b) Delifting the materials such as stones, concrete etc., for concrete below ground level 37.00
for construction of masonry ground level reservoirs, construction of masonry ground level
reservoirs, inspection wells, test wells and sump wells etc., for every 1 m depth or part
1 Cum
thereof beyond the initial depth of 3 meters from ground level.
33 Labour charges for fixing ventilating shafts complete with all accessories. To follow as
Each per
AP.Standard
34 Labour charges for fixing water closets including fixing of foot rests (for all sizes). Each
35 Labour charges for fixing of flushing cistern including fixing of flush pipes, lead pipe,
jointing etc., complete Each
36 Labour charges for fixing wash hand basin including fixing of inlet and waste pipe
connections etc., complete Each Relevent
Building SoR
37 Fixing urinal with inlet and waste pipe connections etc., complete. Each items
38 Refilling the trench for pipe line with excavated earth including watering and tamping
etc., complete 10 Cum
39( a) Extra allowance for isolated scattered works viz., valve pits / chambers, public 50% extra
fountains, meter pits and manholes, delivery cistern etc., complete. Each over the cost
of chamber.
( b) Repairs to the existing mains, interconnections, replacement of valves/specials etc., 150% extra
including the cutting ,jointing, bailing out of water, drying, earth work execavation over the cost
etc., complete. of work
40 Removal of wet silt and sludge from sullage drains with aid of baskets and vessels.
10 Cum 1595.00
41 Well sinking in sandy and other loose soils under water either by manual labour,
divers, or dredgers, weighting the top of staining to assist sinking etc., including
dewatering and other incidental charges such as hire charges for mechanical equipment etc
Upto 2 m below GL/m Per metre
From 2 to 4 m below GL/m Per metre To adopt as per
AP.Standard
From 4 to 6 m below GL/m Per metre
data8
No. 2014-15
1 2 3 4
Note:-Below 10 m for every metre depth or part thereof add Rs.250/- per
m. For higher dia, observed data is to be prepared and got approved.
42 Sinking in Hard strata other than rock but in soils like limestone, gravel, clay under water
including, pumping dewatering, hire charges for mechanical equipment etc., complete. Observed Data
43 Rates for OHSRs/ELSRs including fixtures with a staging of 15 m, without Seismic
analysis.
a 500 Kilo litres Per litre 18.27
b 1000 Kilo litres Per litre 15.10
c 1500 Kilo litres Per litre 13.63
d 2000 Kilo litres Per litre 12.74
e 2500 Kilo litres Per litre 11.96
1) The above rates are arrived with base rate of Cement Rs.4000/- per MT & Steel for
Rs.46,500/- per MT for the month of May'2014
2) All concrete components shall be designed with M30 Design Mix proportion.
3) For intermediate capacities proportional rates shall be adopted.
4) The foundations shall be designed for Annular Raft Footings.

The above rates are applicable for Elevated Level Services Reservoirs / OHSRs for
SBC of 15 T/Sqm.
a) For every decrease of 2.50 T/Sqm of SBC, the rate shall be incresed by
2.50% on basic rate .
b) For every increase of 2.5 T/Sqm of SBC, the rate shall be decreased by
1.0% on basic rate.
c) For SBC below 10T/sqm , solid raft shall be provided and for solid raft the rate shall
be increased by 10% on basic rates
5) For staging less than 15 m, the rate shall be decreased by Rs.0.05 paise on basic rate
per litre per every metre decrease in staging.
6) For staging above 15 m, the rate shall be increased by Rs.0.10 paise on basic rate per
litre per every metre additional staging.
7) The above rates shall be increased / decreased due to increase/decrease in the cost of
cement by Basic rate x (Rc-4000) x 0.00007
Rc = Rate of Cement (Rs per MT) at the time of preparation of estimate.
8) The above rates shall be increased / decreased due to increase/decrease in the cost of
Steel by Basic rate x (Rs-46,500) x 0.00002
Rs = Rate of Steel (Rs per MT) at the time of preparation of estimate.
9) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface
of the Reservoir including roof.
No. 2014-15
1 2 3 4
10) The above rates are adopted for preparation of estimate for construction of
ELSRs/OHSRs for finished work including 2 coats of weather proof emulsion painting for
external surfaces, lettering, all required fixtures, Pipes,Pipe specials, valves of DI material,
Valve chambers etc., for pipe connections including cost of pipes,specials and valves
as per departmental designs and drawings.
11) The above rates adopted for a wind pressure upto "350 kg/sq m". For every 100
kg/sqm decrease in wind pressure, the rate shall be decreased by 5%
12) For tribal/Agency / Rural area, the above rates shall be increased by 10%
13.The Basic rate is adopted by considering the design for Seismic forces for Zone-I &
II only of seismic zones.
1/3
(a) The basic rates shall be increased by 33 % for Zone-III of seismic zones.
14. The ELSR/OHSR shall be designed with minimum of two rows of columns for
capacities above 500 KL & upto 1000KL.
15. The ELSR/OHSR shall be designed with minimum of three rows of columns for
capacities above 1000KL.
16) The basic rate is inclusive of following Fixtures
i) Pipe connections & Specials with D.I materials

a) All pipe conections for Inlet, Out let, Over Flow, Scour pipes shall be provided
with D/F DI material.
b) The Valves for above pipe connections also shall be of DI material of PN 16
c) All specials such as Bends,Tees, Reducers, Duckfoot Bends,Bell mouths etc,. shall be
of DI material.
II) The sizes of the verticals for ELSR/OHSR shall be:
a) For 500 KL to 750 Kl ELSRs Inlet
Pipe - 300mm dia.
Out let Pipe - 350mm dia Over
Flow pipe - 350m dia Scour
Pipe - 200mm dia
b) For 800 KL to 1500 Kl ELSRs Inlet

Pipe - 400mm dia.
Pipe - 200mm dia
c) For above 1500 KL to 2500 Kl ELSRs Inlet
Pipe - 400mm dia.
Pipe - 200mm dia
10
Sl. Description Unit SoR
No. for
2014-
1 2 3 4
iii) Manhole Frames & Covers
a) All man hole Frames & Covers shall be made of CI/DI materials with min. size of
0.60mX 0.60m - For Roof & Valve Chambers.
iv) CI/D.I Double Swan neck ventilators (min.of 150mm dia) shall be provided in top
dome and slab with mosquito/fly proof nets - 4Nos.
v) RCC Finial ventilator with fly/bird protection with GI mesh - 1 No.
vi) RCC precast ladders of 0.60 m width - 2 Nos.
vii) RCC dog legged stair case of 1.00 m flight width and 1.20 m landing width R.C.C
hand railing of 1.0 m height – 1 No
viii)The staircase shall be enclosed with brick masonary walls on three side and
st
collapsible MS gate on front side up to 1 brace level, to prevent unauthorized entry.
ix) Construction of R.C.C valve chambers as per Standard Drawings with RCC cover
slab fixed with CI/DI manhole Frame & Cover with lock and Key arrangement.The Mix
shall not be less than VRCC M 20 grade with 150mm thick side walls, 150mm thick top
slab, 150mm thick base slab over base course of 100mm thick (1:4:8) prop.
x) Balcony of 1.00 m width at floor slab level / middle ring beam level by using
Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of
40mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia at an interval not
more than of 1.00m c/c.
xi) Water Level Indicator of reputed make – Digital type (1 No) and Conventional
type (1 No)
xii) Lightening Arrestor with all its accessories complete including

earthing,with relevant IS Codes - 1 No.
xiii) Compound wall: Construction of compound wall including ornamental M.S.Gate of

size 3.0 X 2.40m is included in the basic rate of ELSRs. Length of compound wall hall be
minimum of 150m. Min. height of the compound wall shall be 1.80m above plinth and
thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed
including earth work excavation in all types of soils for plinth beam of 230mm X
300mm and 0.75X0.75X1.20m size for column footing portions. The footings shall be of
0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C (1:4:8)prop bed of
100mm thick. The columns shall be of 230X230 mm in size with VRCC M20 grade at
3.00m c/c spacing, having depth of 1.20m below ground level and height of 2.00m above
GL. The plinth beam of size of 230X300 mm shall be constructed in VRCC M20 grade at
Gound level, over a bed of CC(1:4:8)-100mmthick. 450X450mm size columns in M20
grade shall be constructed for gate pillars. All the materials shall be followed as per the
standards.
No. 2014-15
1 2 3 4
Tie beam shall be provided above the brick work with 230X200mm size, fixed with
MS angulars of 25mm X 25mm X 4mm in "Y" shape to hieght of 0.60m, with embedded
length of 150mm in concrete. The barbed wire fencing with 3 ply of 18 gauge shall be
streched in 4 rows (2x2). Plastering shall be done with 16mm thick in two coats i.e.,
base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4) prop on both
sides of brick work.
Snowcem paint in two coats shall be provided for both sides of wall. The
M.S ornamental gate as per the approved drawings shall be provided with minimum of
3.60mts width and 2.40mts height with enamel paint. Yard lighting shall be arranged
on four corners of compound wall. If the length of the wall is increased/decreased
Note:-For every 1m increase/decrease in length of compound wall the increase/decrease
in basic rates of ELSRs of the capacities from 500KL to 2500KL shall be as follows.:
i) 500 KL : 0.086%
ii) 1000 KL : 0.047%
iii) 1500 KL : 0.034%
iv) 2000 KL : 0.026%
v) 2500 KL : 0.022 %
For intermediate capacities, interpolated percentages shall be adopted.
xiv) Staff Quarter shall be constructed for a minimum plinth area of 40 sqm with the
following specification: RCC framed structure withconcrete grade not less than M20
design mix at the locations specified by the department at the time of execution with
verandah, hall, bed room, kitchen and bath &W/C with floor area of 40.00sqmts excluding
balconies and staircases.
MS hollow door frame with cold rolled processed steel sheet 1.25mm thick bright CRCA
conforming to IS 4351/76, Flush door shutters with solid bond wood bond board doors
shall be provided. N.C.L. Windows centre fixed both sides openable shutter window
1.35 X 1.35mts outer frame section 48 x50mm shutter frame section with a size of 48
X20 mm mullion section of size 48 X 50mm fixed beading section of 12 X 12 mm
shall be provided. Flooring with polished Kadapa stone shall be provided. Walls shall be
provided with snowcem paint in two coats over primary coat. Electrical and water supply
arrangement shall be provided as directed by dept officer. Water Storage tank made
with plastic/polymer material of reputed make with necessary out let and inlet
connection pipes shall provided. Septic tank for 5 users shall be provided.
44 Rates for OHSRs/ELSRs including fixtures with a staging of 10 m without Seismic

analysis.
a Upto 10,000 Litres capacity Per litre 58.54
b 15,000 Litres capacity Per litre 40.26
c 20,000 Litres capacity Per litre 39.56
d 40,000 Litres capacity Per litre 35.02
No. 2014-15
1 2 3 4
e 60,000 Litres capacity Per litre 26.57
f 1,00,000 Litres capacity Per litre 24.53
g 2,00,000 Litres capacity Per litre 21.47
h 3,00,000 Litres capacity Per litre 20.15
i 4,00,000 Litres capacity Per litre 17.77

j 4,50,000 Litres capacity Per litre 15.40
NOTE: -1) For intermediate ranges proportional rates may be adopted. All VRCC shall
be in M30 grade design mix.
2)The above rates are applicable for Elevated Level Services Reservoirs / OHSRs with
RAFT FOUNDATION and a rate of Rs.4,000/- per tonne for cement and Rs.46,500/- per
tonne for steel.
3) For every metre of staging less than 10 m, the rate shall be reduced by Rs.0.05 paise
per litre per every metre of difference in staging
4) For every metre of staging above 10 m , the rate shall be increase by Rs.0.10 paise
per litre per every metre of additional in staging
5) The above rates shall be increased / decreased due to increase / decrease in the cost of
cement by
Basic Rate x (Rc-4000) x 0.00007
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate
6)The above rates shall be increased / decreased due to increase / decrease in the cost of
steel by
Basic Rate x (RS-46500) x 0.00002
Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.
7) Rate inclisive of three coates of epoxy paint to inner surface of the reservoir
including roof dome.
8) The above rates be adopted for estimate purposes for construction of ELSR for a
finished work including 2 coats of wheather proof emulsion painting for external
surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but
excluding cost of pipes,bends and valves as per departmental designs and drawings.
9) The above rates are applicable for wind pressures upto 350 kg / sq m .For decrease in
wind presure the rate has to be decreased by 5% per every 100kg/sqm. If the ELSR
/ OHSR is to be designed for seismic forces also, cost shall be arrived by working out
detailed quantities based on the designs.
10) For Tribal/Agency/ Rural area, the above rates shall be increased by 10%
11) If the ELSR is to be designed for seismic forces also, cost shall be arrived by
working out detailed quanitites based on the design & difference
to be paid extra.
13
No. 2014-15
1 2 3 4
12) If the ELSR is to be designed for seismic forces a) The above rates are applied upto
Zone-II earth quake. b) for Zone-III earth quake the above rates are to be increased by
33.33 % .
13) Fixtures include :

a) RCC or Aluminium ladder inside 0.60 m wide.
b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL
ELSR Capacity dog legged staircase shall be provided with staircase flight width of
1.0mts and landing width of 1.20mts with S.S railing upto 1.0 height.
c) Lightening arrestor, including conductor and earthing etc.
d) RCC ventilators with copper or stainless steel fly proof mesh.
e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) -
2 Nos.
f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.
g) The ladder shall be with M.S ladder and Verticals with HDPE of 10kg/Sqcm
shall be provided for single column OHSRs only.
h) Minimum staging for all ELSR/OHSR shall be 10.0mts.
i) The increase in staging shall be at 1.0mt interval.
j)The railing provided to the gallery and stair case shall be with stainless steel of grade
304 for a height of 1.20mts.
k). The dog legged staircase shall be enclosed with brick/CRS wall on three sides and
front side with M.S collapsible gate upto 1st brace level from ground level to prevent
unauthorized entry.
l). D.I swan neck ventilators shall be provided in top dome and slab.
m). The above rates are exclusive of all inlet, out let conenction and valves. All valves
near inlet, out let and for scour of ELSRs shall be D.I valves.
45 Construction of Rapid Gravity Filtration Plant including all civil, mechanical and electrical
works using sand as filter media, compatible with SCADA arrangements, duly following
relavant IS codes in the design of plant components including trial running for 90 days etc.,
complete.
1) 2.0 Mld Per litre 4.33
5) 30.00 mld and above Per litre 2.42
NOTE :-
a) For intermediate capacities proportional rates may be adopted
No. for
2014-
1 2 3 4
b) The above rates are applicable with cement @ rate of Rs.4,000/-MT and steel of Rs.
46,500/MT.
c)The above rates shall be increased / decreased due to increase / decrease in the cost of
cement by
Basic Rate x (Rc-4000) x 0.00007
Rc = Rate of cement (Rs per Mt) at the time of preparation of estimate
d)The above rates shall be increased / decreased due to increase / decrease in the cost of
steel by
Basic Rate x (RS-46500) x 0.00002
Rs = Rate of steel (Rs per Mt) at the time of preparation of estimate.
e) For Rural areas an extra allowance of 10% shall be given on basic rate
The components of the filtration plant will include the following
A) Civil Works
(All works of VRCC Shall be in M30 design mix)
1). Stilling Chamber and Areation cascade
2). Raw water channel with Stainless Steel Weir of SS304L Grade material and also with
digital flow meters
3) Flash Mixer chamber with Flash mixing arrangements including SS shaft

& SS Blades with gear wheel arrangements etc, Using 304L Grade Steel.
4) Clariflucculator / Flocculation tanks with the components of central driven circular

clarifier with scrapper & bridge arrangements made with Stainless Steel Grade 304 L
tubes /angulars for durability & chemical resistant with wheel arrangements etc,.
5) Filter house, Chemical house, Alum store, Laboratory room , Chlorination plant room,
toilet etc. (All structures shall be provided RCC roof only).Chemical house &
Chlorinator rooms are to be isolated.
6) Wash water tank of suitable capacity shall be constructed at minimum clearance of
2.00m, above the roof slab of Filter beds / any other structure.
7) All the Doors and Windows shall be of Best Teak wood/Aluminium / UPVC make,
except entrance door. The entrance door including shutter in filter house shall be with best
teak wood of size of 2.40 X 2.40 mts.
a) Main Doors of the individual Buidings shall be made of Best Teak wood
b) Other Internal Doors of the buildings shall be of Compreesed wood/ Aluminium/
UPVC materials.
c) Ventilators shall be provided for each building/structure of suitable size as per NBC
statndards.
Sl. Description Unit
No. So
R
1 2 3 4
8) All pipes and valves in Plant shall be of D.I. materials. All the Connecting
pipes of the plant coponents such as from Flash mixer to Clarifloculator/
Clarifier/Flocculation tank, to Filter beds, sludge disposal pipes shall be of D.I.
material. The size of sludge disposal pipe shall be minimum of 450 mm dia with
D.I D/F pipe.
9) The Pipe gallery way for Clear water/ Back wash water/ pipe connections shall
be suffuiciently spaced for easy operation & maintenance and
10) The bottom level of the wash water control chamber must be above G.L so as to
dispose the wash water and sludge from Clariflocculator by gravity to disposal point.
Additional specificaions
11) Railing for all the components (Clarifloculator, Filter House, Staircase etc,.)
shall be provided with Stainless Steel of grade 304 for a height of 1.00m, with
40mm dia pipe for top horizotals,25mm dia for middle row and 40mm dia verticals
spaced at interval of not more than 1.00m c/c.
12) Inspection / Path ways in filter beds : Middle pathway: Minimum of

1.50m,Side pathway: Minimum of 1.20m.
13) Flooring in the buildings (Filter house, Chemical House, Chlorinator Room,
Laboratory) shall be provided with Non-skid tiles of approved make
14) The basement of the Filtration plant building shall be minimum

of 1.20m above the existing nearby Road top level.
15) Minimum head room of 2.00m shall be provided , at the alum mixing
chambers in alum store for inspection & maintenance
16) The minimum width of entrance hall for the Filter House shall be 4.50m
, and Laboratory, of min size .of 3.30 X 4.50m .
17) High efficient Air Blowers shall be installed to the design requirement with
low noise pollution , environmental pollution as per PCB guide lines & Testing of
blowers as per I.S norms at site.
18) UPVC pipes shall be provided for water drain.Filter pipe manifolds shall be
assembled with HDPE pipes.
19) Alum storage capacity shall be designed for minimum period of 90 days.
Consumables shall be provided for 2115 Running Hours of WTP.
20) Chlorinator : Vaccum type chlorinator shall be provided with following
specifications:
a) Vaccum operated solution feeding type Vaccum Regulator, Rotometer, Rate
setting Valve, built-in NRV, Gas Overflow out let by manifolding to mount the
system with the unit.
b) The unit shall consists of Ejector with necessary accessories such as Check
Valve, Drain Valve and Vacum relief Valves - for control of chlorinator dosage.
c) The Accessories and manifolds shall be chlorine resistant and made of corbon
steel seam less pipes, copper tube with brass fittings of suitable size
& dimensions, with diaphram sealed chlorine pressure gauge arrangements
No. for
2014-
1 2 3 4
d) Water Boosted Pump of pumping capacity ranging from 2 cum/hr to 12 cum/hr, with
Head ranging from 16 to 35 MWC
e) The water & solution carrying pipes shall be made of UPVC material of suitable size
incl.all specials such as Tee's , Bends, couplings & NRVs and also Pressure Gauges of
suitable range.
f) Chlorine Gas detector with alarm indicator.
The installation includes all necessary accssories, civil and mechanical works,manifold
header installations, injector fixing, connection with UPVC pipes, solution pipings, fixing
of motors as per standard speicfications and commissioning of Cholirnation Plant to the
required demand, with a deffect liability period of 1 year.
The cholrinator of may be of any reupted make or any make of Metito/Toshocow-
Jesco/ Industrial devices.
g) Life breathing
operators. h)Chlorine escape
BA Set.
i) 2 to 10 MLD Plants - 1Kg/hr Chlorinator for Post
Chlorination
ii) 10 MLD to 20 MLD Plants - 2 Kg/hr Chlorinator for Post
Chlorination.
iii) 20 MLD to 50 MLD Plants - 5 Kg/hr Chlorinator for Post

Chlorination.
B) Mechanical Equipment
1) Alum dosing equipment with SS 304 material made stirrers & paddles for chemical
resistance. (Alam tanks must be bound with corrosion resistant material (HDPE Lining,
Bitumen Coating, tiles etc)
2) Flash mixer equipment with SS 304 material made stirrers & paddles for chemical
resistance.
3) Filtration plant euqipment instrumentation and piping.

4) Clarifloccualation equipment (with stainless steel blades) with rotating bridge
arrangeemnt etc.,
5) Pneumatic tyre wheel shall be provided for the bridge clariflocculator.
6) Wash water tank fittings and pumpsets with 100% stand by.
7)Air blower with motor 100% stand by and pipe connections made with of SS Pipes
Confirming to SS304 Grade, in filter bed region.
8)Spares & Tools for 2 years

9) Gaseous Chlorination with cylinders has to provided with protection measures.
C) Electrical Equipment
1) Necessary power supply wiring to motors and switches bus bar connections
as per IE Rules
2) Internal wiring and illumination and fittings and fixtures for internal and external
lighting exhaust fans, ceiling fans etc.
3) Erecting mechanical and electrical equpment, trial run for 90 days 23.50 hours per day
ttesting the treated water for efficient stardards and maintenance of records and
imparting training to staff.
No. 2014-15
1 2 3 4
4) Supply of 6 - Sets of completion plans and maintenance manual and brochures.
5) All cables shall be with of copper material, Cable ducts shall be covered with MS /
Aluminum chequed plate.
6) Min LUX levels inside the treatment plant shall be maintained.
7) Yard lighting shall be provided as per norms.
D ) Equipment for Flow measurements
1) Equipment for Flow of Conductivity, Turbidity, Ph value, Residual Chlorine with
recording & data storage facility (Computer based) & Alarm by SMS or other methods.
2) Off - Site Supervisory and Data Acquisition (OSSADA) system for Raw water & Clear
water flows by installing Digital Flow meters to measure the flows at Raw water Channel
and at each filter bed individually and combined for measuring the quantities of water
treated with a facility to record and store the readings & also to send messages to
the assigned designatories about the variations/ defficiencies in the flow including alerts
for back wash requirements of filter beds, and recovery of data for the past 360 days. All
the Digital Flow Meters & Pressure Gauges shall be provided of standard approved make.
The equipment shall have the following specifications, but not limited to:
Hardware:
i) Wall mounted Sensor House for measuring Raw water & Clear water flow from Filter
bed out lets with accessories consists of
ii)Electrode Type: General type, Scraper type or replaceable type Electorde made with
material of SS external Ultra Touch Sensors as per requirement.
iii)Customised Application Requirement : Sensors with Interface logic control board with
serial interfaces, including accessories such as Add-on port, external DC Power Socket,
On - sensor Board Buffer, Timer, RS485 Communication, Analog to Digital Sensing
Sensor Circuit, 32 Sensors Sensing Tags, Interval Power Supply System , LCD
16c/2L, Filter Bed Working Status Indication LED, Filter Bed Wash Indication
Button and memory of Data Storage for 30Days , status of Filter Bed Level indicator,
Rating, Reading on LCB Display, Menu Driven Data for sending to Onsite Big Display,
operated with Battery Power of any reputed make or any equalent make.
iv)Customised Application Requirement: Power Sensors Interface logic control board with
support 8 Power Sensing tags, Central System Interfacing Communication, On - board
analog to Digit Convert Integrate Circuit of any reputed make or any equalent make.
No. for
2014-
1 2 3 4
v)Customised Application Requirement: Centralized System with two serial interfaces, 3
Nos of Add-On ports, One external DC Power Socket, On - Board Buffer, On - Board
Timer, On - Board RS485 Communication, On - Board RS 232 Communication, On -
Board GPRS/GSM Module, On - Board Voice Chip, On - Board Power Sensing Module,
LCD 16c/2L, Filter Bed Wash Precaution Indication with Stop Button, Memory of Data
Storage for 30 Days, Total Bed Rating, Reading display on LCD Display, Menu
Driven, Menu Navigate Keypad, sendind data to the Web Server, Communication
with GPRS , operated with Battery Power of any reputed make or any equalent make.
Software:
The software shall be designed with Web Domain with Data Base Server and Web
Name as per the directions of the Departmental Authorities
The application of Software for Web design & Desktop shall meet the following
requirements:
Onsite Display: Letters with size of 1.5’ seven Sigment LED Display with Interface for
each Filter Bed, for Onsite Display, by displaying the Bed Leves, Ratings, Readings in
3 Columns , for each bed of the plant in succesive rows and cumulative results at the bottom
of the screen.
Off Site Display: Letters with size of 1.5’ seven Sigment LED Display with Interface
GPRS/GSM Modules Offsite Display, with Display of Bed Total Rating, Total Cumulative
Reading as specified on On-site Display Features.
The system shall have also the features of Onsite Bed Wash Voice Precautions for Bed
Levels, Readings, Ratings, Bed Capacity Readings and Ratings and Bed Low Level
Triggering, before & after Bed wash.
The software shall also have the features of sending messages to the mobiles of the
Departmental designatories indicating Bed Low Levels,Power Supply timings, Bed Wash
timings and its status, Power Supply timings and its status Grid View Table, Motor
Working time and its status Grid View Table, all trigger events and schedule
information and including all Snap View Reports, all Daily, Monthly, Yearly Reports, all
Power Working Reports, all Power Events Information etc,.
1. S o R FOR R.C.C. PLAIN ENDED PIPES
Sl.
Description
No.
1 2
Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to
1 B.I.S 458/2003 , Ex-factory, Excluding transportation, taxes & duties
Size Unit SoR For 2014-15

NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia Metre 133
100 mm dia Metre 154
300 mm dia Metre 361 824 845
350 mm dia Metre 450 1015 1035
400 mm dia Metre 519 1121 1147
450 mm dia Metre 635 1284 1297
500 mm dia Metre 697 1395 1604
600 mm dia Metre 1032 2099 2490
700 mm dia Metre 1321 2609 3338
800 mm dia Metre 1625 3447 4361
900 mm dia Metre 2046 4331 5433
1000 mm dia Metre 2489 5379 7428
1100 mm dia Metre 2951 6347 8611
1200 mm dia Metre 3515 7477 10068
1400 mm dia Metre 4791 9660 13928
1600 mm dia Metre 5549 12540 16750
1800 mm dia Metre 7277 16630 22466
Note : All the prices are ex-works. Excise duty, CST/VAT extra as applicable at the time of
supply.
The above rates of RCC Plain ended pipes are based on the following raw materials cost. Cement.
Rs.4,000/- per MT (including all taxes and freight).
Steel (M.S. Rods) - Rs.41,000/- per MT. (including all taxes and freight).
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be as per
the following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of M.S. Rods =
(S2-S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement
= (C2-C1)/1000 X Wc.
S1 = Rs. 41,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate.
C1 = Rs. 4,000/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of
Ws=Weight of MS Rods required (Kg.) per metre of pipe as per IS:458/2003. Wc=
Weight of Cement required (Kg.) per metre of pipe.
310
2. S o R FOR R.C.C. COLLARS
Sl.No. Description
1 2
Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S.
1 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including
transportation but excluding taxes & duties

80 mm dia Each 41
100 mm dia Each 42
150 mm dia Each 44
200 mm dia Each 59
225 mm dia Each 62
250 mm dia Each 68
300 mm dia Each 90 129 129
350 mm dia Each 111 160 160
400 mm dia Each 123 183 183
450 mm dia Each 193 243 243
500 mm dia Each 219 289 289
600 mm dia Each 297 379 379
700 mm dia Each 386 510 510
800 mm dia Each 545 649 649
900 mm dia Each 652 756 756
1000 mm dia Each 761 945 945
1100 mm dia Each 932 1197 1197
1200 mm dia Each 1133 1499 1499
1400 mm dia Each 1461 1898 1898
1600 mm dia Each 1865 2434 2434
1800 mm dia Each 1932 3136 3136
Note: Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC Collars suitable to plain ended pipes are based on the following raw materials
cost.
Cement. Rs.4,000/- per MT (including all taxes and freight).
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be as per the
following formula.
R1= Variation (increase / decrease) in cost (Rs. per each ) due to change in the cost of M.S. Rods = (S2-
S1)/1000 X Ws. R2= Variation (increase / decrease ) in cost (Rs. per each )due to change in the cost of
Cement = (C2-C1)/1000 X Wc.
S1 = Rs. 41,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of
C1 = Rs. 4,000/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate
Ws=Weight of MS Rods required (Kg.) per each collar. Wc=
Weight of Cement required (Kg.) per each collar.
311
3. S o R FOR R.C.C. S/S PIPES (Non - Pressure)
Sl.
Description
No.
1 2
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes
1 conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective
length) Excluding transportation, taxes & duties.

80 mm dia Metre 165
300 mm dia Metre 435 1049 1116
350 mm dia Metre 559 1337 1359
400 mm dia Metre 617 1482 1507
450 mm dia Metre 768 1635 1647
500 mm dia Metre 885 1870 2032
600 mm dia Metre 1245 2623 2695
700 mm dia Metre 1615 3348 3505
800 mm dia Metre 2072 4432 4577
900 mm dia Metre 2618 5571 5755
1000 mm dia Metre 3180 6297 6859
1100 mm dia Metre 3729 7433 7923
1200 mm dia Metre 4226 8772 9274
1400 mm dia Metre 6017 11616 13152
1600 mm dia Metre 7443 15084 15832
1800 mm dia Metre 8364 19999 21243
Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of
supply. The above rates of RCC S/S Non-Pressure pipes are based on the following raw materials
cost.
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be as per
the following formula.
Revised Cost = Cost as per the above table +R1+R2
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of
M.S. Rods =(S2-S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement
=(C2-C1)/1000 X Wc.
S1 = Rs. 41,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time
of preparation of estimate.
C1 = Rs. 4,000/- , C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of
preparation of estimate
Ws=Weight of MS Rods required (Kg.) per metre of pipe as per IS:458/2003. Wc=
Weight of Cement required (Kg.) per metre of pipe.
312
4. S o R FOR R.C.C. S/S PIPES (Pressure)
Sl.No. Description
1 2
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes conforming to
1 B.I.S. 458/2003 Ex-factory (rate per meter of effective length) Excluding
transportation, taxes & duties.
P1 - Class P2 - Class P3 - Class
80 mm dia Metre 216 244 277
100 mm dia Metre 244 292 337
150 mm dia Metre 336 435 537
200 mm dia Metre 391 561 741
225 mm dia Metre 440 638 826
250 mm dia Metre 482 683 868
300 mm dia Metre 650 984 1227
350 mm dia Metre 810 1366 1769
400 mm dia Metre 962 1808 2335
450 mm dia Metre 1030 2143 2879
500 mm dia Metre 1367 2333 3277
600 mm dia Metre 1872 3477 4557
700 mm dia Metre 2493 4590 5797
800 mm dia Metre 3122 5471 7022
900 mm dia Metre 3768 6446
1000 mm dia Metre 4750 7411
Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC S/S Pressure pipes are based on the following raw materials cost.
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be
as per the following formula.
R1= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of
M.S. Rods =(S2-S1)/1000 X Ws.
R2= Variation (increase / decrease) in cost (Rs. per metre) due to change in the cost of Cement
=(C2-C1)/1000 X Wc.
S1 = Rs. 41,000/-
S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of preparation of
estimate.
C1 = Rs. 4,000/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time
of preparation of estimate
Ws=Weight of MS Rods required (Kg) per metre of pipe as per IS: 458 / 2003. Wc=
Weight of Cement required (Kg) per metre of pipe.
313
5. S o R FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES
Sl. No. Description
1 2
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Socket and
Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring)
1 including transportation but excluding taxes & duties. the Rubber Rings shall
be tested at the factory premises confirming to B.I.S. 5382/1985.
80 mm dia Each 26
100 mm dia Each 32
150 mm dia Each 57
200 mm dia Each 67
225 mm dia Each 74
250 mm dia Each 83
300 mm dia Each 101 130 130
350 mm dia Each 117 155 155
400 mm dia Each 129 176 176
450 mm dia Each 146 200 200
500 mm dia Each 191 229 229
600 mm dia Each 251 333 333
700 mm dia Each 341 398 398
800 mm dia Each 433 483 483
900 mm dia Each 542 653 653
1000 mm dia Each 634 788 788
1100 mm dia Each 762 1009 1009
1200 mm dia Each 1220 1268 1268
1400 mm dia Each 1342 1395 1395
1600 mm dia Each 1671 1703 1703
1800 mm dia Each 2081 2175 2175
Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Socket and
Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring)
2 including transportation but excluding taxes & duties. The Rubber Rings shall
be tested at the factory premises confirming to B.I.S. 5382/1985.
Size P1 - Class P2 - Class P3 – Class
80 mm dia Each 26 26 26
100 mm dia Each 32 34 34
150 mm dia Each 57 57 57
200 mm dia Each 67 67 67
225 mm dia Each 74 75 77
250 mm dia Each 83 85 87
300 mm dia Each 101 107 111
350 mm dia Each 117 134 146
400 mm dia Each 129 176 180
314
Size P1 - Class P2 - Class P3 – Class
450 mm dia Each 146 202 207
500 mm dia Each 191 229 239
600 mm dia Each 251 283 288
700 mm dia Each 341 374 398
800 mm dia Each 433 479 479
900 mm dia Each 542 604
1000 mm dia Each 634 729
1100 mm dia Each 762
1200 mm dia Each 1220
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate.
315
6. S o R FOR CONVEYANCE OF R.C.C. PLAIN ENDED
PIPES
Rate upto
5 Kms Rate for Rate for
Rate upto 5 Kms
Lead every every
Lead including
including additional additional 1
Sl.No. Description Loading,
Loading, 1 KM lead KM lead or
unloading and
unloading or part part thereof.
stacking
and thereof.
stacking
1 2 3 4 5 6
Conveyance of R.C.C plain ended pipes on all weathered roads including
1 loading, unloading and stacking (per metre) SoR for 2014-15
NP - 2 Class NP - 3 Class & NP - 4 Class

80 mm dia 3.00 0.13
100 mm dia 4.00 0.13
150 mm dia 6.00 0.26
200 mm dia 8.00 0.26
225 mm dia 9.00 0.40
250 mm dia 10.00 0.40
300 mm dia 14.00 0.53 39.00 1.07
350 mm dia 20.00 1.20 42.00 1.20
400 mm dia 22.00 1.33 50.00 1.60
450 mm dia 29.00 1.60 54.00 1.86
500 mm dia 31.00 1.86 59.00 1.86
600 mm dia 45.00 2.93 89.00 4.13
700 mm dia 57.00 4.13 99.00 4.80
800 mm dia 67.00 4.13 119.00 4.80
900 mm dia 77.00 4.13 156.00 9.05
1000 mm dia 114.00 8.51 188.00 9.05
1100 mm dia 125.00 8.51 204.00 9.85
1200 mm dia 142.00 9.05 228.00 9.85
1400 mm dia 171.00 9.05 310.00 10.25
1600 mm dia 198.00 9.05 372.00 10.25
1800 mm dia 228.00 9.05 496.00 14.38
316
7. S o R FOR CONVEYANCE OF R.C.C. S/S
PIPES Rate for Rate upto 5
Rate upto 5 Kms Rate for every
every Kms Lead
Lead including additional 1
additional including
Sl.No. Description Loading, KM lead or
1 KM lead Loading,
unloading & part thereof.
or part unloading and
stacking
thereof. stacking
1 2 3 4 5 6
Conveyance of R.C.C. Socket and Spigot pipes on all weather roads including loading,
1
unloading and stacking (per metre of effective length) SoR for 2014-15
Size NP - 2 & P1 Class NP – 3 & NP - 4 Class
80 mm dia 4.00 0.12
100 mm dia 4.00 0.24
150 mm dia 7.00 0.24
200 mm dia 9.00 0.48
225 mm dia 10.00 0.48
250 mm dia 11.00 1.09
300 mm dia 18.00 1.21 46.00 1.45
350 mm dia 21.00 1.33 50.00 1.69
400 mm dia 21.00 1.57 62.00 3.15
450 mm dia 30.00 1.69 68.00 3.15
500 mm dia 33.00 1.82 75.00 3.39
600 mm dia 43.00 3.15 101.00 4.84
700 mm dia 53.00 3.39 136.00 9.56
800 mm dia 73.00 5.20 161.00 9.56
900 mm dia 109.00 9.32 186.00 9.56
1000 mm dia 124.00 9.32 196.00 9.56
1100 mm dia 140.00 9.56 210.00 9.56
1200 mm dia 156.00 9.56 235.00 9.80
1400 mm dia 194.00 9.56 315.00 9.80
1600 mm dia 230.00 9.80 372.00 10.53
1800 mm dia 285.00 9.80 496.00 14.40
P2 - Class P3 – Class
80 mm dia 4.00 0.12 4.00 0.12
100 mm dia 4.00 0.24 4.00 0.24
150 mm dia 7.00 0.24 7.00 0.24
200 mm dia 9.00 0.48 12.00 1.09
225 mm dia 12.00 1.09 14.00 1.21
250 mm dia 13.00 1.21 17.00 1.33
300 mm dia 25.00 1.45 29.00 1.57
350 mm dia 31.00 1.69 40.00 1.82
400 mm dia 37.00 1.82 53.00 3.15
450 mm dia 47.00 3.03 66.00 3.15
500 mm dia 53.00 3.15 80.00 4.72
600 mm dia 70.00 3.15 116.00 6.05
700 mm dia 105.00 6.41 169.00 9.56
800 mm dia 139.00 9.08 216.00 9.56
900 mm dia 169.00 9.56
1000 mm dia 208.00 9.80
317
8. S o R FOR A.C. PIPES
Sl.No Description
Manufacture, Supply of A.C. Pressure pipes (mazza process) as per BIS No: 1592/2003 as
amended from time to time duly marked with BIS mark, including cost of material, incidental
handling, loading and packing charges but are exclusive of transportation, unloading, stacking
1
at departmental stores, and excluding excise duty, VAT octroi and other govt. Levies. The
pipes shall be tested at factory premises confirming to is code 1592/2003.
Class - 15 Class - 20 Class - 25
80 mm dia Rate/Metre 185 203 253
300 mm dia Rate/Metre 1314 1712 2187
350 mm dia Rate/Metre 1602 2082 2625
400 mm dia Rate/Metre 2082 2723 3380
450 mm dia Rate/Metre 2472 3281 4108
500 mm dia Rate/Metre 3051 4012 5037
600 mm dia Rate/Metre 4339 5666 7220
700 mm dia Rate/Metre 5728 7770 10047
750 mm dia Rate/Metre 6528 8969 11496
800 mm dia Rate/Metre 7469 10162 13042
850 mm dia Rate/Metre 8378 11432 14686
900 mm dia Rate/Metre 9340 12772 16427
1000 mm dia Rate/Metre 11530 15680 20201
2 Lowering, laying and jointing of ac pressure pipes with ac couplings or CID joints complete
with Rubber rings in readymade trenches true to alignment and gradient including filling with
water lead upto 500 mts and testing to required pressure including all sundries but excluding
cost of jointing materials and conveyance from source of supply as per BIS No. 6530/1972
80 mm dia Rate/Metre 35.00 35.00 35.00
100 mm dia Rate/Metre 52.00 52.00 52.00
125 mm dia Rate/Metre 57.00 57.00 57.00
150 mm dia Rate/Metre 68.00 68.00 68.00
200 mm dia Rate/Metre 89.00 89.00 89.00
250 mm dia Rate/Metre 107.00 107.00 107.00
300 mm dia Rate/Metre 132.00 132.00 132.00
350 mm dia Rate/Metre 224.00 224.00 224.00
400 mm dia Rate/Metre 336.00 336.00 336.00
450 mm dia Rate/Metre 409.00 409.00 409.00
500 mm dia Rate/Metre 520.00 520.00 520.00
600 mm dia Rate/Metre 559.00 559.00 559.00
700 mm dia Rate/Metre 624.00 624.00 624.00
750 mm dia Rate/Metre 694.00 694.00 694.00
800 mm dia Rate/Metre 730.00 730.00 730.00
850 mm dia Rate/Metre 779.00 779.00 779.00
318
900 mm dia Rate/Metre 850.00 850.00 850.00
1000 mm dia Rate/Metre 875.00 875.00 875.00
1. The above rates of AC Pipes are based on the Cement cost of RS 4,000/- per MT
(Including all taxes and freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs 76,000/- per M.T
(Excluding all taxes & Frieght)
For any Increase/ Decrease in the rate of cement, the price of AC pipe per Rmt shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of pipe in Kg’s/Rmt IC =
Increase/Decrease in cost of cement/Kg
For any increase/decrease in the rate of fiber, the price of AC pipe per Rmt shall be
increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of pipe in Kg’s/Rmt IF =
Increase /Decrease in cost of fiber/Kg
Note: 1) The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
2) The cement rate shall be communicated by the sub-committee of Board of Chief
engineers.
3)The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
Transportation of AC pressure pipes at site of work anywhere in Andhra 10% on the basic
Pradesh on motor able roads for full truck loads including transit insurance, cost of
unloading, and stacking at site of work etc. Complete (AC Couplings and Rubber corresponding AC
2 rings are to be supplied free of transportation charges). Pressure pipes.
319
9. S o R FOR A.C. COUPLINGS
Sl.
No. Description
1 2
Manufacture, Supply of A.C Couplings suitable to A.C.Pressure pipes (mazza process) as
per BIS: 1592/2003 excluding cost of rubber rings to suit AC pressure pipes including
1 cost of material, incidental handling, packing, transportation and unloading at site
transit risk, but excluding excise duty, VAT and other govt. Levies and testing of joints as
per IS Code.
0
Class - 15 Class - 20 Class – 25
80 mm dia Rate/Each 88 95 109
350 mm dia Rate/Each 607 784 1001
400 mm dia Rate/Each 935 1221 1563
450 mm dia Rate/Each 1120 1476 1895
500 mm dia Rate/Each 1335 1785 2280
600 mm dia Rate/Each 1640 2059 2634
700 mm dia Rate/Each 2164 2913 3788
750 mm dia Rate/Each 2441 3337 4307
800 mm dia Rate/Each 2769 3755 4859
850 mm dia Rate/Each 3085 4200 5446
900 mm dia Rate/Each 3414 4669 6062
1000 mm dia Rate/Each 4166 5677 7399
1. The above rates of AC Coupling are based on the Cement cost of RS 4,000/- per MT (Including all taxes
and freight).
2. The above rates of AC Coupling are based on the Fiber cost of Rs 76,000/- per M.T (Excluding all taxes &
Frieght)
For any Increase/ Decrease in the rate of cement, the price of AC Coupling per Each shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of Coupling in Kgs/Each
IC = Increase/Decrease in cost of cement/kg
For any increase/decrease in the rate of fiber, the price of AC Coupling per Each shall be increased/Decreased
as under :
W x 0.15 X IF Where : W=: Weight of Coupling in Kgs/Each
IF = Increase /Decrease in cost of fiber/kg
The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
The cement rate shall be communicated by the sub-committee of Board of Chief engineers. Note: The
duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
320
PUBLIC
10. S o R FOR RUBBER RINGS TO SUIT A.C. COUPLINGS

Sl.
Description
No.
1 2
Schedule of rate for supply of Rubber rings manufactured as per BIS: 5382/1988 with BIS
Mark embossed per each set suitable for A.C. Couplings including cost of material, incidental,
1 handling, packing, transportation and unloading at site transit risk etc., but excluding VAT. The
Rubber Rings shall be tested at the factory premises confirming to
B.I.S 5382/1988
Class - 15 Class - 20 Class - 25
80 mm dia Each Set 68.00 68.00 68.00
100 mm dia Each Set 83.00 83.00 83.00
125 mm dia Each Set 108.00 108.00 108.00
150 mm dia Each Set 136.00 136.00 136.00
200 mm dia Each Set 142.00 142.00 142.00
250 mm dia Each Set 164.00 164.00 164.00
300 mm dia Each Set 164.00 164.00 164.00
350 mm dia Each Set 186.00 186.00 186.00
400 mm dia Each Set 228.00 228.00 228.00
450 mm dia Each Set 267.00 267.00 267.00
500 mm dia Each Set 309.00 309.00 309.00
600 mm dia Each Set 350.00 350.00 350.00
700 mm dia Each Set 727.00 727.00 727.00
750 mm dia Each Set 755.00 755.00 755.00
800 mm dia Each Set 811.00 811.00 811.00
850 mm dia Each Set 904.00 904.00 904.00
900 mm dia Each Set 950.00 950.00 950.00
1000 mm dia Each Set 1053.00 1053.00 1053.00
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
321
Public Health Items
11. S o R FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES FOR THE YEAR
Sl.No. 2014-15 Description
1 2
Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-factory excluding transportation, taxes
1 & duties., for the following working pressures.(the manufacture shall design the pipes as per the IS Code 784- 2001)
Size Unit SoR For 2014-15.

Rs. Rs. Rs. Rs. Rs. Rs.
6 Kg/cm2 8 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2
350 MM DIA Metre 2637 2646 2660 2675 2732 2830
400 MM DIA Metre 2828 2850 2884 2925 2982 3029
450 MM DIA Metre 2979 2995 3032 3096 3180 3252
500 MM DIA Metre 3224 3240 3269 3346 3420 3527
600 MM DIA Metre 3702 3733 3775 3902 4034 4165
700 MM DIA Metre 4564 4587 4666 4785 4963 5114
800 MM DIA Metre 5389 5450 5599 5742 5983 6209
900 MM DIA Metre 6250 6304 6456 6741 7017 7517
1000 MM DIA Metre 7342 7413 7636 7957 8350 8811
1100 MM DIA Metre 8339 8469 8721 9219 9646 10122
1200 MM DIA Metre 9232 9402 9915 10393 11022 11940
1300 MM DIA Metre 10466 11083 11713 12353 13451 14719
1400 MM DIA Metre 11984 12698 13443 14636 15711 16588
1500 MM DIA Metre 13989 14831 15673 17044 18185 19181
1600 MM DIA Metre 15754 16715 17677 20101 20612 21739
1700 MM DIA Metre 16584 17288 18241 20600 22874 23955
1800 MM DIA Metre 17861 19061 20178 22260 24717 25923
1900 MM DIA Metre 19092 20203 22087 23415 25543 28523
2000 MM DIA Metre 20990 22370 23623 26052 29787 32030
Cost of laying jointing, testing to hydrostatic field test pressure including cost of rubber rings, cost of transportation of water and emptying
2
pipe line after completion of field testing etc.
350 MM DIA Metre 194 194 194 194 194 194
322
Public Health Items
400 MM DIA Metre 209 209 209 209 209 209
450 MM DIA Metre 242 242 242 242 242 242
500 MM DIA Metre 257 257 257 257 257 257
600 MM DIA Metre 316 316 316 316 316 316
700 MM DIA Metre 371 371 371 371 371 371
800 MM DIA Metre 420 420 420 420 420 420
900 MM DIA Metre 460 460 460 460 460 460
1000 MM IA Metre 531 531 531 531 531 531
1100 MM IA Metre 596 596 596 596 596 596
1200 MMDIA Metre 661 661 661 661 661 661
1300 MM DIA Metre 749 749 749 749 749 749
1400 MM DIA Metre 847 847 847 847 847 847
1500 MM DIA Metre 919 919 919 919 919 919
1600 MM DIA Metre 1030 1030 1030 1030 1030 1030
1700 MM DIA Metre 1121 1121 1121 1121 1121 1121
1800 MM DIA Metre 1186 1186 1186 1186 1186 1186
1900 MM DIA Metre 1253 1253 1253 1253 1253 1253
2000 MM DIA Metre 1318 1318 1318 1318 1318 1318
Conveyance of pre-stressed (Non-cylinder) concrete pipies and accessories including loading at factory, un-loading at site and stacking for the
3
following sizes.(minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
350 MM DIA PerKM/M 1.30 1.30 1.30 1.30 1.30 1.30
400 MM DIA PerKM/M 1.30 1.30 1.30 1.30 1.30 1.30
450 MM DIA PerKM/M 1.60 1.60 1.60 1.60 1.60 1.60
500 MM DIA PerKM/M 1.70 1.70 1.70 1.70 1.70 1.70
600 MM DIA PerKM/M 1.90 1.90 1.90 1.90 1.90 1.90
700 MM DIA PerKM/M 3.10 3.10 3.10 3.10 3.10 3.10
800 MM DIA PerKM/M 3.10 3.10 3.10 3.10 3.10 3.10
900 MM DIA PerKM/M 3.10 3.10 3.10 3.10 3.10 3.10
1000 MM DIA PerKM/M 5.00 5.00 5.00 5.00 5.00 5.00
323
Public Health Items
1100 MM DIA PerKM/M 5.00 5.00 5.00 5.00 5.00 5.00
1200 MM DIA PerKM/M 9.60 9.60 9.60 9.60 9.60 9.60
1300 MM DIA PerKM/M 9.70 9.70 9.70 9.70 9.70 9.70
1400 MM DIA PerKM/M 9.70 9.70 9.70 9.70 9.70 9.70
1500 MM DIA PerKM/M 9.70 9.70 9.70 9.70 9.70 9.70
1600 MM DIA PerKM/M 10.90 10.90 10.90 10.90 10.90 10.90
1700 MM DIA PerKM/M 10.90 10.90 10.90 10.90 10.90 10.90
1800 MM DIA PerKM/M 11.10 11.10 11.10 11.10 11.10 11.10
1900 MM DIA PerKM/M 11.60 11.60 11.60 11.60 11.60 11.60
2000 MM DIA PerKM/M 11.60 11.60 11.60 11.60 11.60 11.60

Cost of Machine End pair (Socket +Spigot) for providing M.S Specials on PSC pipelines excluding cost of M.S Special including cost and
4
conveyance to site etc., complete.
350 MM DIA Per Pair 12236 12236 12236 12236 12236 12236
400 MM DIA Per Pair 14035 14035 14035 14035 14035 14035
450 MM DIA Per Pair 15833 15833 15833 15833 15833 15833
500 MM DIA Per Pair 17633 17633 17633 17633 17633 17633
600 MM DIA Per Pair 21161 21161 21161 21161 21161 21161
700 MM DIA Per Pair 24759 24759 24759 24759 24759 24759
800 MM DIA Per Pair 28358 28358 28358 28358 28358 28358
900 MM DIA Per Pair 31956 31956 31956 31956 31956 31956
1000 MM DIA Per Pair 35267 35267 35267 35267 35267 35267
1100 MM DIA Per Pair 38866 38866 38866 38866 38866 38866
1200 MM DIA Per Pair 42464 42464 42464 42464 42464 42464
1300 MM DIA Per Pair 45775 45775 45775 45775 45775 45775
1400 MM DIA Per Pair 53980 53980 53980 53980 53980 53980
324
Public Health Items
1500 MM DIA Per Pair 63337 63337 63337 63337 63337 63337
1600 MM DIA Per Pair 70534 70534 70534 70534 70534 70534
1700 MM DIA Per Pair 79145 79145 79145 79145 79145 79145
1800 MM DIA Per Pair 90452 90452 90452 90452 90452 90452
1900 MM DIA Per Pair 104584 104584 104584 104584 104584 104584
2000 MM DIA Per Pair 125784 125784 125784 125784 125784 125784
Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness confirming to is:7322-1985 and flange
5
dimensions confirming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site, vat etc., complete.
Diameter and thickness Unit Rate Diameter and thickness Unit Rate
80 mm diax 15 mm thick Each Flange 784 500mm diax 20 mm thick Each Flange 7927
100 mm diax 15 mm thick Each Flange 1069 600 mm diax 20 mm thick Each Flange 9978
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.59,500/-MT (Basic+ CED+ST & freight). and cement
price of Rs.4,000/- per MT (including all taxes and freight)
The rates may be revised depending upon the increase/decrease in the cost of HT wire and cement. as per the following method. The cost of HT wire may be obtained
from reputed firms like SAIL/TATA/ SS Ltd. etc.,
Revised Cost =Cost as per the above table +R1+R2.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh. R2= Variation
(increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc.
H1 = Rs. 59,500/- H2 = Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate. C1 = Rs.
4,000/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate Wh=Weight of HT Wire
required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
325
Public Health Items
The rates for MS flanges are considering landed price of MS Plates of Rs.45,000/- per MT. Price variation to be released on actual weight of flange. Note: The duties and
taxes as applicable shall be added as per rules at the time of preparation of estimate
12. S o R FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES FOR THE YEAR 2014-15
Sl
Description
No.
1 2
Pre-stressed (Cylinder type ) concrete pipes conforming to IS 784/2001 @ ex-factory cost of pipes, excluding transportation, laying, jointing, testing, bends,
1 tees, specials, taxes & duties etc,. For the following working pressures.(the manufacture shall design the pipes as per the IS Code 784-2001).
8 10 12 14 16 18 20
4 Kg/cm2 6 Kg/cm2
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
400 MM DIA Meter 5063 5063 5063 5063 5089 5143 5234 5321 5388
450 MM DIA Meter 5503 5503 5503 5528 5594 5674 5789 5868 5960
500 MM DIA Meter 6016 6016 6030 6115 6188 6289 6383 6525 6630
600 MM DIA Meter 7144 7197 7292 7419 7536 7654 7835 8003 8172
700 MM DIA Meter 8256 8386 8543 8710 8868 9022 9215 9462 9646
800 MM DIA Meter 9686 9868 10087 10306 10506 10710 10959 11222 11525
900 MM DIA Meter 11448 11681 11952 12226 12499 12745 13076 13404 13730
1000 MM DIA Meter 13279 13590 13917 14255 14590 14869 15257 15657 16068
1100 MM DIA Meter 14763 15134 15527 15881 16255 16596 17021 17470 18454
1200 MM DIA Meter 16734 17167 17606 18043 18491 18892 19389 20374 21077
1300 MM DIA Meter 18607 19108 19618 20128 20652 21113 22289 22916 23704
1400 MM DIA Meter 20406 20976 21571 22168 22763 23939 24668 25413 27068
1500 MM DIA Meter 22378 23014 23651 24277 25595 26318 27412 29037 30944
1600 MM DIA Meter 25249 25957 26680 28028 28849 29670 31714 32621 33503
1700 MM DIA Meter 27169 27989 28858 30403 31333 33072 34639 35621 36552
1800 MM DIA Meter 29755 30616 32300 33345 34365 36282 37954 39134 40314
1900 MM DIA Meter 34911 35893 37772 38881 40866 42444 43988 45298 46536
2000 MM DIA 37199 39060 40322 41620 43886 45257 47377 48883 50219
Meter
Cost of laying jointing, testing to hydrostatic field test pressure including cost of site welding and fixing of polypropylene diapher cloth, cost of
2
transportation of water and emptying pipe line after completion of field testing etc.
400 MM DIA Meter 408 408 408 408 408 408 408 408 408
326
Public Health Items
450 MM DIA Meter 480 480 480 480 480 480 480 480 480
500 MM DIA Meter 523 523 523 523 523 523 523 523 523
600 MM DIA Meter 612 612 612 612 612 612 612 612 612
700 MM DIA Meter 697 697 697 697 697 697 697 697 697
800 MM DIA Meter 800 800 800 800 800 800 800 800 800
900 MM DIA Meter 902 902 902 902 902 902 902 902 902
1000 MM DIA Meter 988 988 988 988 988 988 988 988 988
1100 MM DIA Meter 1120 1120 1120 1120 1120 1120 1120 1120 1120
1200 MM DIA Meter 1222 1222 1222 1222 1222 1222 1222 1222 1222
1300 MM DIA Meter 1308 1308 1308 1308 1308 1308 1308 1308 1308
1400 MM DIA Meter 1440 1440 1440 1440 1440 1440 1440 1440 1440
1500 MM DIA Meter 1598 1598 1598 1598 1598 1598 1598 1598 1598
1600 MM DIA Meter 1730 1730 1730 1730 1730 1730 1730 1730 1730
1700 MM DIA Meter 1948 1948 1948 1948 1948 1948 1948 1948 1948
1800 MM DIA Meter 2065 2065 2065 2065 2065 2065 2065 2065 2065
1900 MM DIA Meter 2253 2253 2253 2253 2253 2253 2253 2253 2253
2000 MM DIA Meter 2398 2398 2398 2398 2398 2398 2398 2398 2398
Conveyance of Pre-stressed (Cylinder type) concrete pipes and accessories including loading at factory, un-loading at site and stacking for the following
3 sizes. (minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
400 MM DIA Per 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10
KM/M
450 MM DIA Per 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10
KM/M
500 MM DIA Per 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.60
KM/M
600 MM DIA Per 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80
KM/M
700 MM DIA Per 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90
KM/M
800 MM DIA Per 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90
KM/M
900 MM DIA Per 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90
KM/M
1000 MM DIA Per 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60
KM/M
327
Public Health Items
1100 MM DIA Per 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60 4.60
KM/M
1200 MM DIA Per 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00
KM/M
1300 MM DIA Per 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00
KM/M
1400 MM DIA Per 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00
KM/M
1500 MM DIA Per 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00
KM/M
1600 MM DIA Per 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00
KM/M
1700 MM DIA Per 10.90 10.90 10.90 10.90 10.90 10.90 10.90 10.90 10.90
KM/M
1800 MM DIA Per 10.90 10.90 10.90 10.90 10.90 10.90 10.90 10.90 10.90
KM/M
1900 MM DIA Per 10.90 10.90 10.90 10.90 10.90 10.90 10.90 10.90 10.90
KM/M
2000 MM DIA Per 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50
KM/M
Note: The rates of PCCP pipes which were incorporated in the SSR are based on the following raw materials cost. HT Wire: -
Rs.59,500/- (including all taxes & freight)
HR Coil (Hot Rolled): - Rs.50,000/- (including all taxes & freight) Cement Cost
Rs. 4,000/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method. Revised Cost =Cost
as per the above table +R1+R2+R3.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh. R2=
Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HR Coil =(R2-R1)/1000 X Wr. R3= Variation
(increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 59,500/- H2 = Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate. R1 = Rs.
50,000/- R2 = Cost of HR Coil (Rs. Per MT including all taxes and freight) at the time of preparation of estimate . C1 = Rs. 4,000/- C2
= Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate Wh=Weight of HT Wire required
(Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
Wr = Weight of HR Coil required (kg) per metre of pipe. Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
328
Public Health Items
13. S o R FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES FOR THE YEAR 2014-15
Sl.
Description
No
1 2
Bar Wrapped Steel Cylindrical (BWSC) pipes conforming to IS 15155 - 2002, ex-factory excluding transportation, taxes and duties etc., for bar wrapped steel
1 cylindrical pipes.
Size Unit Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs.
4 -12 14 16 18 20 22 24 26 28 30
2 2 2 2 2 2 2 2 2 2
Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm
250 MM DIA Meter 2953 2953 2953 2953 2953 2953 2957 3002 3039 3196
300 MM DIA Meter 3326 3326 3326 3326 3326 3380 3478 3612 3689 3878
350 MM DIA Meter 4026 4026 4026 4051 4102 4158 4273 4433 4571 4771
400 MM DIA Meter 4420 4420 4449 4530 4594 4816 5015 5219 5391 6090
450 MM DIA Meter 4876 4895 4990 5067 5329 5559 5836 6064 6319 6842
500 MM DIA Meter 5450 5539 5644 5933 6227 6552 6885 7175 7652 8120
600 MM DIA Meter 7207 7339 7483 7936 8386 8757 9259 9699 10309 10823
700 MM DIA Meter 8693 8979 9615 10234 10864 11484 12283 12856 13487 14325
800 MM DIA Meter 9889 10780 11571 12337 13165 14177 15060 16242 17004 18040
900 MM DIA Meter 12277 12883 13899 14907 15872 16715 18381 19755 20711 22061
1000 MM DIA Meter 13883 15309 16503 17672 18870 20479 22499 24070 25503 27252
1100 MM DIA Meter 20010 20388 20702 22750 25035 26627 29611 31138 33286 36097
1200 MM DIA Meter 22132 22865 23816 26257 28874 31126 33903 35413 39595 43417
Cost of laying jointing, testing to hydrostatic field test pressure including cost of site welding and fixing of polypropylene diaher cloth, cost of
2
transportation of water and emptying pipe line after completion of field testing.
250 MM DIA Meter 278 278 278 278 278 278 278 278 278 278
300 MM DIA Meter 327 327 327 327 327 327 327 327 327 327
350 MM DIA Meter 387 387 387 387 387 387 387 387 387 387
400 MM DIA Meter 433 433 433 433 433 433 433 433 433 433
450 MM DIA Meter 433 433 433 433 433 433 433 433 433 433
500 MM DIA Meter 542 542 542 542 542 542 542 542 542 542
600 MM DIA Meter 666 666 666 666 666 666 666 666 666 666
329
Public Health Items
700 MM DIA Meter 776 776 776 776 776 776 776 776 776 776
800 MM DIA Meter 883 883 883 883 883 883 883 883 883 883
900 MM DIA Meter 1038 1038 1038 1038 1038 1038 1038 1038 1038 1038
1000 MM DIA Meter 1147 1147 1147 1147 1147 1147 1147 1147 1147 1147
1100 MM DIA Meter 1348 1348 1348 1348 1348 1348 1348 1348 1348 1348
1200 MM DIA Meter 1509 1509 1509 1509 1509 1509 1509 1509 1509 1509
Conveyance of Bar Wrapped Steel Cylindrical (BWSC) pipes and accessories including loading at factory, un-loading at site and
3 stacking for the following sizes. (minimum distance of 100 km to be considered if the distance is less by 100 km from factory to site)
250 MM DIA Per KM/M 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60
300 MM DIA Per KM/M 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60
350 MM DIA Per KM/M 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80
400 MM DIA Per KM/M 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
450 MM DIA Per KM/M 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30
500 MM DIA Per KM/M 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.60
600 MM DIA Per KM/M 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70
700 MM DIA Per KM/M 1.90 1.90 1.90 1.90 1.90 1.90 1.90 1.90 1.90 1.90
800 MM DIA Per KM/M 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50
900 MM DIA Per KM/M 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70
1000 MM DIA Per KM/M 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10
1100 MM DIA Per KM/M 6.93 6.93 6.93 6.93 6.93 6.93 6.93 6.93 6.93 6.93
1200 MM DIA Per KM/M 9.68 9.68 9.68 9.68 9.68 9.68 9.68 9.68 9.68 9.68
Note: The above rates of BWSC pipes are based on the following raw materials' cost. HR Plates - Rs.50,000/- per MT (Basic +CED+ST & freight)
Wire rods - Rs.48,000/- per MT (Basic +CED+ST & freight) Cement Cost Rs. 4,400/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method. Revised Cost =Cost as
per the above table +R1+R2+R3.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HR Plate =(H2-H1)/1000 X Wh. R2= Variation (increase / decrease ) in
cost (Rs. per metre )due to change in the cost of wire rods =(W2-W1)/1000 X Ww. R3= Variation (increase / decrease ) in cost (Rs. per metre )due to change in
the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 50,000/- H2 = Cost of HR Plate (Rs. Per MT including all taxes and freight) at the time of preparation of estimate. W1 = Rs. 48,000/- W2 = Cost of
Wire rods (Rs. Per MT including all taxes and freight) at the time of preparation of estimate .
C1 = Rs. 4,000/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate Wh=Weight of
HR Plate required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
Ww = Weight of wire rods required (kg) per metre of pipe.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
330
Public Health Engineering Items
14. S o R FOR M.S. PIPES FOR THE YEAR

2014-15
Thicknes
Sl.No. Description Unit Rate (Rs.)
s in mm
1 2 3 4 5
1 Manufacture, supply and delivery of M.S Pipes
conforming to is 3589/2001 including in lining
with cement mortar (1:2) 15mm thick using 4
numbers of 6mm dia M.S.Rings at each end of
the pipe and out coating with cement mortar
(1:3) 30mm thick by shortcreting or gunetting
duly providing wire mesh of size 50x50x3mm
including cost of all materials, labour charges,
transportation to anywhere in AP, but
excluding taxes & duties, etc.
500 mm dia Meter 8.00 8771
600 mm dia Meter 8.00 10457
700 mm dia Meter 8.00 12196

700 mm dia Meter 10.00 15144
800 mm dia Meter 8.00 13992

800 mm dia Meter 10.00 16190
800 mm dia Meter 12.00 19180
900 mm dia 8.00 15621

900 mm dia Meter 10.00 18089
900 mm dia Meter 12.00 20563
1000 mm dia Meter 8.00 17529

1000 mm dia Meter 10.00 20260
1000 mm dia Meter 12.00 22907
1000 mm dia Meter 14.00 26473
1100 mm dia Meter 8.00 20638

1100 mm dia Meter 10.00 23643
1100 mm dia Meter 12.00 26650
1100 mm dia Meter 14.00 30810
1100 mm dia Meter 16.00 34986
1200 mm dia Meter 8.00 23313

1200 mm dia Meter 10.00 26579
1200 mm dia Meter 12.00 29856
1200 mm dia Meter 14.00 33150
1200 mm dia Meter 16.00 37632
1200 mm dia Meter 18.00 42128
1300 mm dia Meter 8.00 25437
331
1300 mm dia Meter 10.00 28971

1300 mm dia Meter 12.00 32517
1300 mm dia Meter 14.00 36072
1300 MM DIA Meter 16.00 39643
1300 MM DIA Meter 18.00 44368
1300 MM DIA Meter 20.00 49107
1400 MM DIA Meter 8.00 27068

1400 MM DIA Meter 10.00 30867
1400 MM DIA Meter 12.00 34680
1400 MM DIA Meter 14.00 38508
1400 MM DIA Meter 16.00 42342
1400 MM DIA Meter 18.00 47382
1400 MM DIA Meter 20.00 52434
1400 MM DIA Meter 22.00 57500
1500 MM DIA Meter 8.00 28971

1500 MM DIA Meter 10.00 33044
1500 MM DIA Meter 12.00 37121
1500 MM DIA Meter 14.00 41214
1500 MM DIA Meter 16.00 45318
1500 MM DIA Meter 18.00 49427
1500 MM DIA Meter 20.00 54684
1500 MM DIA Meter 22.00 59956
1500 MM DIA Meter 24.00 65242
1600 MM DIA Meter 8.00 30617

1600 MM DIA Meter 10.00 34936
1600 MM DIA Meter 12.00 39285
1600 MM DIA Meter 14.00 43645
1600 MM DIA Meter 16.00 48015
1600 MM DIA Meter 18.00 52395
1600 MM DIA Meter 20.00 57961
1600 MM DIA Meter 22.00 63542
1600 MM DIA Meter 24.00 69136
1600 MM DIA Meter 26.00 74742
1700 MM DIA Meter 8.00 32505

1700 MM DIA Meter 10.00 37108
1700 MM DIA Meter 12.00 41723
1700 MM DIA Meter 14.00 46351
1700 MM DIA Meter 16.00 50986
1700 MM DIA Meter 18.00 55636
1700 MM DIA Meter 20.00 61543
1700 MM DIA Meter 22.00 67466
1700 MM DIA Meter 24.00 73398
1700 MM DIA Meter 26.00 79349
1700 MM DIA Meter 28.00 85308
1800 MM DIA Meter 8.00 34409
332
1800 MM DIA Meter 10.00 39279

1800 MM DIA Meter 12.00 44163
1800 MM DIA Meter 14.00 49061
1800 MM DIA Meter 16.00 53960
1800 MM DIA Meter 18.00 58879
1800 MM DIA Meter 20.00 63805
1800 MM DIA Meter 22.00 69933
1800 MM DIA Meter 24.00 76074
1800 MM DIA Meter 26.00 82226
1800 MM DIA Meter 28.00 88394
1800 MM DIA Meter 30.00 94572
1900 MM DIA Meter 8.00 35005

1900 MM DIA Meter 10.00 41177
1900 MM DIA Meter 12.00 46323
1900 MM DIA Meter 14.00 51486
1900 MM DIA Meter 16.00 56659
1900 MM DIA Meter 18.00 61845
1900 MM DIA Meter 20.00 67035
1900 MM DIA Meter 22.00 73467
1900 MM DIA Meter 24.00 79912
1900 MM DIA Meter 26.00 86372
1900 MM DIA Meter 28.00 92843
1900 MM DIA Meter 30.00 99329
1900 MM DIA Meter 32.00 105824
2000 MM DIA Meter 8.00 36624

2000 MM DIA Meter 10.00 43074
2000 MM DIA Meter 12.00 48492
2000 MM DIA Meter 14.00 53920
2000 MM DIA Meter 16.00 59359
2000 MM DIA Meter 18.00 64812
2000 MM DIA Meter 20.00 70268
2000 MM DIA Meter 22.00 75700
2000 MM DIA Meter 24.00 82329
2000 MM DIA Meter 26.00 88971
2000 MM DIA Meter 28.00 95629
2000 MM DIA Meter 30.00 102295
2000 MM DIA Meter 32.00 108976
2000 MM DIA Meter 34.00 115669
2100 MM DIA Meter 8.00 38472
2100 MM DIA Meter 10.00 45245
2100 MM DIA Meter 12.00 50930
2100 MM DIA Meter 14.00 56614
2100 MM DIA Meter 16.00 62332
2100 MM DIA Meter 18.00 68049
2100 MM DIA Meter 20.00 73777
2100 MM DIA Meter 22.00 79519
2100 MM DIA Meter 24.00 86481
333
2100 MM DIA Meter 26.00 93454

2100 MM DIA Meter 28.00 100442
2100 MM DIA Meter 30.00 107440
2100 MM DIA Meter 32.00 114453
2100 MM DIA Meter 34.00 121478
2100 MM DIA Meter 36.00 128515
2200 MM DIA Meter 8.00 40088

2200 MM DIA Meter 10.00 47142
2200 MM DIA Meter 12.00 53096
2200 MM DIA Meter 14.00 59056
2200 MM DIA Meter 16.00 65033
2200 MM DIA Meter 18.00 71014
2200 MM DIA Meter 20.00 77011
2200 MM DIA Meter 22.00 83021
2200 MM DIA Meter 26.00 97561
2200 MM DIA Meter 28.00 104847
2200 MM DIA Meter 30.00 112148
2200 MM DIA Meter 32.00 119461
2200 MM DIA Meter 34.00 126789
2200 MM DIA Meter 36.00 134128
2200 MM DIA Meter 38.00 141481
2300 MM DIA Meter 10.00 49313

2300 MM DIA Meter 12.00 55533
2300 MM DIA Meter 16.00 68000
2300 MM DIA Meter 18.00 74255
2300 MM DIA Meter 20.00 80519
2300 MM DIA Meter 22.00 86791
2300 MM DIA Meter 26.00 101983
2300 MM DIA Meter 28.00 109597
2300 MM DIA Meter 30.00 117226
2300 MM DIA Meter 32.00 124866
2300 MM DIA Meter 34.00 132519
2300 MM DIA Meter 36.00 140186
2300 MM DIA Meter 38.00 147865
2300 MM DIA Meter 40.00 155555
2400MM DIA Meter 10.00 51209
2400 MM DIA Meter 12.00 57696
2400 MM DIA Meter 14.00 65125
2400 MM DIA Meter 16.00 71636
2400 MM DIA Meter 18.00 78153
2400 MM DIA Meter 20.00 84687
2400 MM DIA Meter 22.00 92073
2400 MM DIA Meter 26.00 99701
2400 MM DIA Meter 28.00 106641
2400 MM DIA Meter 30.00 113593
2400 MM DIA Meter 32.00 120556
2400 MM DIA Meter 34.00 127528
334
2400 MM DIA Meter 36.00 134516

2400 MM DIA Meter 38.00 141511
2400 MM DIA Meter 40.00 142254
2400 MM DIA Meter 42.00 149268
2500 MM DIA Meter 10.00 53383

2500 MM DIA Meter 14.00 66902
2500 MM DIA Meter 16.00 73677
2500 MM DIA Meter 18.00 80465
2500 MM DIA Meter 20.00 87261
2500 MM DIA Meter 22.00 94071
2500 MM DIA Meter 28.00 118761
2500 MM DIA Meter 30.00 127019
2500 MM DIA Meter 34.00 143569
2500 MM DIA Meter 36.00 151864
2500 MM DIA Meter 38.00 160171
2500 MM DIA Meter 40.00 168490
2500 MM DIA Meter 42.00 176824
2500 MM DIA Meter 44.00 185170
2500 MM DIA Meter 46.00 193528
2600 MM DIA Meter 12.00 62297
2600 MM DIA Meter 14.00 69333
2600 MM DIA Meter 16.00 76379
2600 MM DIA Meter 18.00 83432
2600 MM DIA Meter 20.00 90497
2600 MM DIA Meter 22.00 97572
2600 MM DIA Meter 32.00 140298
2600 MM DIA Meter 34.00 148882
2600 MM DIA Meter 36.00 157477
2600 MM DIA Meter 38.00 166085
2600 MM DIA Meter 40.00 174707
2600 MM DIA Meter 42.00 183343
2600 MM DIA Meter 44.00 191990
2600 MM DIA Meter 46.00 200650
2600 MM DIA Meter 48.00 209323
2 Cost of Laying, Jointing, Hydrostatic Filed Test
Pressure, Including Cost of Site Welding,
Jointing Materials And Cost of Transportation
of Water Including Emptying Pipe Line After
Completion Of Field Testing
400 MM DIA Meter 479
335

The above rates of MS Spiral pipes are based on the following raw materials cost. MS Plates =
Rs 46,500/- Per MT.
The rates may be revised depending upon the increase/decrease in the cost of raw materials (landed price) as per
the following method.
Revised Cost = Cost as per the above table "R1".
R1= Variation (Increase/Decrease) in cost (Rs. Per meter) due to change in cost of MS Plates = (M2-
M1)/1000 x Wm
M1= Rs 46,500/-
M2= Cost of MS Plates (Rs. Per MT including all taxes and freight ) at the
time of preparation of estimate
Wm=Weight of MS Plates required (Kg) per meter of pipe
336
15. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2014-15. (PE - 80 Grade)
4.0 kg/
Sl.No Description sqcm
1 2 4
Manufacture, Supply, & Delivery of HDPE pipes conforming to IS
4984 - 1995 including transportation to any where in A.P, excluding
excise duty, sale tax and specials etc., complete. (supply upto 90
mm diain coil & above 90 mm dia straight lengths in 6 m.)
Rate per Meter
OD 20 mm -
OD 25 mm -
OD 32 mm -
OD 40 mm 44
OD 50 mm 68
OD 63 mm 93
OD 75 mm 127
OD 90 mm 182
OD 110 mm 271
OD 125 mm 350
OD 140 mm 432
OD 160 mm 565
OD 180 mm 713
OD 200 mm 874
OD 225 mm 1134
OD 250 mm 1402
OD 280 mm 1748
OD 315 mm 2221
OD 355 mm 2711
OD 400 mm 3513
OD 450 mm 4467
OD 500 mm 5485
OD 560 mm 6795
OD 630 mm 8595
OD 710 mm 10921
OD 800 mm 13823
OD 900 mm 17515
OD 1000 mm 21569
Note: Excise duty, CST / VAT extra as applicable at the time of supply. The
IPCL resin cost adopted for the above rates are
For PE - 80 grade Rs.1,18,720/- per MT. (Excluding CED&ST)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be allowed as per
the following price variation formula.
price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost) P2 =
P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost) P2 =
Revised pipe price in Rs. Per Meter excluding CED & ST
P1 = Existing pipe price in Rs. Per Meter excluding CED & ST
A2 = Revised price of raw material Rs. Per MT excluding CED & ST A1 =
Existing price of raw material Rs. Per MT excluding CED & ST M = Weight
of pipe in Kgs per Meter as per weight chart.
337
16(I). S o R FOR H.D.P.E PIPES FOR THE YEAR 2014-15. (PE - 100 Grade)
6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0
Sl.
Description sqcm sqcm sqcm kg/ kg/
No
sqcm sqcm
1 2 3 4 5 6 7
I Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 1995 including
transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.
(supply upto 90 mm diain coil & above 90 mm diastraight length in 6 m.)
Rate per Meter

OD 20 mm 32
OD 25 mm 48
OD 32 mm 46 59 78
OD 40 mm 59 70 89 119
OD 50 mm 72 90 109 139 186
OD 63 mm 109 139 168 219 285
OD 75 mm 155 197 237 312 407
OD 90 mm 220 281 337 444 592
OD 110 mm 329 419 500 667 847
OD 125 mm 421 540 649 855 1085
OD 140 mm 529 676 813 1076 1376
OD 160 mm 691 880 1059 1402 1779
OD 180 mm 870 1114 1341 1770 2238
OD 200 mm 1075 1376 1653 2191 2773
OD 225 mm 1386 1773 2134 2765 3492
OD 250 mm 1705 2190 2634 3413 4321
OD 280 mm 2137 2742 3292 4288 5432
OD 315 mm 2709 3472 4175 5408 6874
OD 355 mm 3403 4354 5245 6878 8768
OD 400 mm 4473 5718 6873 8906 11288
OD 450 mm 5565 7144 8597 11260 14165
OD 500 mm 6884 8809 10606 13905 16656
OD 560 mm 8060 10324 12359 15750
OD 630 mm 10166 13062 15656 18787
OD 710 mm 12926 16555 19886
OD 800 mm 16404 21016 25313
OD 900 mm 20781 26604
OD 1000 mm 25626
Note:-
338
Excise duty, CST / VAT extra as applicable at the time of supply. The IPCL
resin cost adopted for the above rates are
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost) P2 = P1
- (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost) P2 = Revised
pipe price in Rs. Per Meter excluding CED & ST
339
16(II)HDPE PIPES –(PE –100 Grade) SEWER LINES FOR THE YEAR 2014-15
6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0

Sl.
Description sqcm sqcm sqcm kg/ kg/
No
sqcm sqcm
1 2 3 4 5 6 7
I Manufacture, Supply, &
Delivery of HDPE Pipes
conforming to IS 14333 - 2000
for using under ground
drainage and sewerage systems
including
transportation to any where in
A.P, excluding excise duty, sale
tax and specials etc., complete. (
supply upto 90 mm diain coil
& above 90 mm diastraight
length in 6 m or 12 m.)
Rate per Meter
OD 63 mm 121 154 184 218 261

OD 75 mm 171 219 261 311 371
OD 90 mm 244 312 372 442 535
OD 110 mm 354 448 534 641 766
OD 125 mm 452 578 692 821 990
OD 140 mm 566 721 868 1033 1242
OD 160 mm 738 941 1131 1303 1618
OD 180 mm 930 1194 1430 1700 2046
OD 200 mm 1152 1470 1763 2105 2522
OD 225 mm 1452 1855 2232 2653 3196
OD 250 mm 1792 2294 2754 3277 3937
OD 280 mm 2240 2870 3433 4120 4944
OD 315 mm 2836 3633 4450 5197 6251
OD 355 mm 3594 4602 5538 6608 7930
OD 400 mm 4739 6064 7281 8681 10412
OD 450 mm 5983 7673 9222 10971
OD 500 mm 7394 9459 11373 13558
OD 560 mm 9245 11855 14270
OD 630 mm 11706 15006 18029
OD 710 mm 15134 19386
OD 800 mm 19199
OD 900 mm 24317
OD 1000 mm 30043
340
Note:-
Excise duty, CST / VAT extra as applicable at the time of supply. The IPCL
resin cost adopted for the above rates are
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost) P2 = P1
- (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost) P2 = Revised
pipe price in Rs. Per Meter excluding CED & ST
341
17(I). S o R FOR H.D.P.E FITTINGS FOR THE YEAR 2014-15.
Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995
including transportation to anywhere in A.P. Excluding excise duty, sale tax and
specials etc., complete
I (a) PIPE ENDS LONG NECK Rate per Each

OD 50 mm 90
OD 63 mm 114
OD 75 mm 137
OD 90 mm 177
OD 110 mm 246
OD 125 mm 442
OD 140 mm 447
OD 160 mm 623
OD 180 mm 883
OD 200 mm 1135
OD 225 mm 1302
OD 250 mm 1525
OD 280 mm 1704
OD 315 mm 1965
OD 355 mm 4107
OD 400 mm 5473
OD 450 mm 9107
OD 500 mm 10135
(b) MS FLANGES Rate per Each
OD 50 mm 114
OD 63 mm 144
OD 75 mm 182
OD 90 mm 196
OD 110 mm 206
OD 125 mm 283
OD 140 mm 307
OD 160 mm 403
OD 180 mm 568
OD 200 mm 736
OD 225 mm 920
OD 250 mm 1086
OD 280 mm 1232
OD 315 mm 1449
OD 355 mm 2454
342
OD 400 mm 3044
OD 450 mm 3974
OD 500 mm 4550
(c) END CAPS Rate per Each
OD 50 mm 61
OD 63 mm 74
OD 75 mm 92
OD 90 mm 122
OD 110 mm 140
OD 125 mm 193
OD 140 mm 225
OD 160 mm 345
OD 180 mm 560
OD 200 mm 611
OD 225 mm 637
OD 250 mm 907
OD 280 mm 928
OD 315 mm 1268
OD 355 mm 1958
OD 400 mm 3420
OD 450 mm 5500
OD 500 mm 10135
(d) REDUCERS Rate per Each
OD 50 mm x 63 mm 85
OD 63 mm x 75 mm 122
OD 75 mm x 90 mm 200
OD 90 mm x 110 mm 277
OD 110 mm x 125 mm 422
OD 125 mm x 140 mm 584
OD 140 mm x 160 mm 815
OD 160 mm x 180 mm 1129
OD 180 mm x 200 mm 1458
OD 200 mm x 225 mm 1790
OD 225 mm x 250 mm 2440
OD 250 mm x 280 mm 3467
OD 280 mm x 315 mm 4901
OD 315 mm x 355 mm 5621
OD 355 mm x 400 mm 7932
343
OD 400 mm x 450 mm 8228
OD 450 mm x 500 mm 10550
(e) TEES Rate per Each
OD 50 mm 117
OD 63 mm 187
OD 75 mm 225
OD 90 mm 396
OD 110 mm 469
OD 125 mm 706
OD 140 mm 973
OD 160 mm 1676
OD 180 mm 2273
OD 200 mm 3130
OD 225 mm 4444
OD 250 mm 6084
OD 280 mm 8519
OD 315 mm 12142
OD 355 mm 17313
OD 400 mm 25360
OD 450 mm 36022
OD 500 mm 49473
(f) BENDS Rate per Each
OD 50 mm 74
OD 63 mm 164
OD 75 mm 213
OD 90 mm 365
OD 110 mm 481
OD 125 mm 710
OD 140 mm 935
OD 160 mm 1394
OD 180 mm 2001
OD 200 mm 2711
OD 225 mm 3845
OD 250 mm 5271
OD 280 mm 7600
OD 315 mm 10511
OD 355 mm 14570
OD 400 mm 21977
344
OD 450 mm 32310
OD 500 mm 43803
II
Providing and Fixing electro Fusion Ferrule Tapping saddle manufactured
from virgin resin of PE-80/PE-100 having blue/black colour using food grade
compounded raw material with quality assurance certificate from quality
agencies like CIPET etc. For usage in drinking water system and having
working pressure of 10 bar. The cost shall include testing of all materials,
labour all taxes (central & state), inspection charges, transportation upto site,
transit insurance, loading, unloading, stacking, providing and fixing etc.
Complete as specified and directed by the Departmental Engineers.
SIZE Rate Each Rs.
(Main pipe outer diameter in mm & Tapping size in Inches)
63x1/2” 837.00
63 x3/4” 837.00
63 x1” 837.00
63 x1/2” 837.00
75 x1/2” 837.00
75 x3/4” 837.00
75 x1 837.00
90 x1/2” 837.00
90 x3/4” 837.00
90 x1” 837.00
90 x 1 1/4” 1086.00
90 x 1 1/2” 1086.00
90 x2” 1086.00
110x1/2” 837.00
110 x3/4” 837.00
110 x1” 837.00
110 x 1 1/4” 1086.00
110x1 1/2” 1086.00
110x2” 1086.00
160 x1/2” 837.00
160 x3/4” 837.00
160 x1” 837.00
160 x 1 1/4” 1187.00
160 x 1 1/2” 1187.00
160 x 2” 1187.00
200 x 1/2” 1182.00
345
200 x 3/4” 1182.00

200 x 1” 1182.00
200 x 1 1/4” 1709.00
200 x 2” 1709.00
250 x 1/2” 1182
250 x3/4” 1182
250 x1” 1182
250 x 1 1/4” 1709
250 x1 1/2” 1709
250 x 2” 1709
315 x 1/2” 1408
315 x3/4” 1408
315x1” 1408
315x1 1/4” 1911
315x1 1/2” 1911
315x2” 1911
346
18. SoR FOR PVC PIPES FOR THE YEAR 2014-15
TEST PRESSURE
Sl. Description
No. 2.5 4.0 6 10
2 2 2 2
Kgs/cm Kgs/cm Kgs/cm Kgs/cm
1 2 3 4 5 6
Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies
conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in
1 light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation
to the sub-divisional stores anywhere in AP excluding Excise duty and Sales Tax etc.
DIA IN MM Rate/Metre Rs. Rs. Rs. Rs.
20 16
25 23
32 36
40 34 56
50 51 85
63 57 82 124
75 83 112 179
90 75 113 162 252
110 112 164 234 377
125 148 214 300 492
140 180 267 386 610
160 239 352 499 800
180 300 449 643 1023
200 380 546 783 1247
225 489 728 1052 1673
250 586 846 1288 2032
280 753 1106 1626 2570
315 949 1400 2046 3245
355 1835 2664
400 2314 3389
The resin cost adopted for the above rates is Rs.79,179/- per MT(Basic rate, excluding CED)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed subject to
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost) P2 = P1
- (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Metre, P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT, A1 = Existing price of raw material Rs. Per MT M =
Weight of pipe in Kgs per Meter as per weight chart.
347
19. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2014-15
Code Description
No
1 2 4
Manufacture, Supply, & Delivery of unplasticized Non- Proposed
pressure polyvinyl chloride(PVC-U) pipes of dark (any shade of Rates
brown) for use in underground drainage & sewerage system 2014-15
conforming to IS 15328/2003) with solvent cement jointing as
per specification inclusive of transportation to the sub-
divisional stores any where in A.P, excluding Central Excise
Duty, Cess, & VAT etc.,
Rate per Meter Rs.
Pipe Series (S25)
OD 160 mm 298
OD 200 mm 455
OD 250mm 705
OD 315 mm 1112
Pipe Series (S20)
OD 125 mm 232
OD 160 mm 370
OD 200 mm 562
OD 250mm 876
OD 315 mm 1375
Pipe Series (S16.5)
OD 110 mm 204
OD 125 mm 275
OD 160 mm 429
OD 200 mm 668
OD 250mm 1035
OD 315 mm 1634
The resin cost adopted for the above rates is Rs.79,179/- per MT (Basic rate, excluding CED)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed subject to
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost) P2 =
P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost) P2 =
Revised pipe price in Rs. Per Metre
P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT A1 =
Existing price of raw material Rs. Per MT
M = Weight of pipe in Kgs per Meter as per weight chart.
348
20. SoR FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2014-15
Code Description
No
1 2 4
Manufacture, supply, & delivery of un-plasticized Non- Proposed
Pressure Polyvinyl Chloride(PVC-U) pipes of dark (any Rates
shade of Brown) for use in underground drainage & sewerage 2014-15
system conforming to IS 15328/2003) with Elastomeric Seal
Ring Joints (Ringtite PVC Pipes)as per specification inclusive
of transportation to the Sub- Divisional stores any where in
A.P, excluding Central Excise Duty, Cess, & VAT etc.,
Rate per Meter Rs.
Pipe Series (S25)
OD 160 mm 319
OD 200 mm 483
OD 250mm 752
OD 315 mm 1183
Pipe Series (S20)
OD 125 mm 249
OD 160 mm 392
OD 200 mm 596
OD 250mm 930
OD 315 mm 1459
Pipe Series (S16.5)
OD 110 mm 217
OD 125 mm 292
OD 160 mm 458
OD 200 mm 706
OD 250mm 1097
OD 315 mm 1732
The resin cost adopted for the above rates is Rs.79,179/- per MT (Basic rate, excluding CED) The
variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed subject to the
following price variation formula.
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost) P2 =
P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost) P2 =
Revised pipe price in Rs. Per Metre
P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT A1 =
Existing price of raw material Rs. Per MT
M = Weight of pipe in Kgs per Meter as per weight chart.
349
21. SoR FOR CENTRIFUGALLY CAST (SPUN)IRON PRESSURE PIPES
Sl.
Description Unit S.S. Rates for 2014-15
No.
1 2 3 4 5 6
Socket and Spigot Centrifugally Cast (Spun)

Iron pressure pipes for water, Gas and Sewage
conforming to specification No: IS 1536/1989
I (third revision) with amdt. No: 1 & 2 in standard
lengths of 3.66 m, 4 m, 4.5m, 5 m, 5.5 m & 6 m LA Class A Class B Class
and details given below, suitable either for lead (Rs) (Rs) (Rs)
jointing or rubber gasket (push on) jointing at
purchasers option at ex-factory excluding
Nominal dia (in MM)

80 Rmt 858 930 1000
100 Rmt 1045 1147 1226
125 Rmt 1318 1439 1549
150 Rmt 1597 1750 1886
200 Rmt 2332 2530 2739
250 Rmt 3142 3422 3702
300 Rmt 4052 4432 4800
350 Rmt 5181 5621 6097
400 Rmt 6308 6893 7439
450 Rmt 7632 8385 9044
500 Rmt 9024 9830 10635
600 Rmt 11935 13029 14112
700 Rmt 15703 17156 18536
750 Rmt 17588 19230 20860
800 Rmt 19687 21451 23205
900 Rmt 23991 29864 28363
1000 Rmt 28823 31483 34029
II Conveyance of Centrifugally Cast (Spun) Iron
Pressure Pipes and accessories including loading
at Factory, un-loading at site and stacking for the
Class
following sizes. (The Minimum distance/lead in
Km for destination below 100 Km to be taken as
100 Km)
SIZE IN MM UNIT LA A B
80 Per KM/RMT 0.24 0.24 0.24
100 Per KM/RMT 0.24 0.24 0.24
125 Per KM/RMT 0.36 0.36 0.36
150 Per KM/RMT 0.36 0.36 0.36
200 Per KM/RMT 0.61 0.61 0.61
250 Per KM/RMT 0.73 0.73 0.73
350
300 Per KM/RMT 0.97 1.09 1.09

350 Per KM/RMT 1.33 1.33 1.45
400 Per KM/RMT 1.57 1.57 1.69
450 Per KM/RMT 1.82 1.94 2.06
500 Per KM/RMT 2.18 2.30 2.42
600 Per KM/RMT 2.18 2.30 2.42
700 Per KM/RMT 2.18 2.30 2.42
750 Per KM/RMT 3.63 3.87 4.11
800 Per KM/RMT 6.17 6.17 6.17
900 Per KM/RMT 6.17 6.17 6.17
1000 Per KM/RMT 6.17 6.17 6.17
Note:The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
Price Variation Formula due to Increase / Decrease in the cost of pig iron. P2=P1+ (R2-
R1)/1000*M*1.0
Where M= Weight of pipe in kg per metre. P2 =
Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of preparation of
estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation of SSR =Rs. 27,500/-
351
22.S o R FOR DUCTILE IRON PRESSURE PIPES FOR THE YEAR2014-15
S.S. Rate
Sl.
Description Unit for
No.
2014-15
1 2 3 4 5
Centrifugally cast (Spun) Ductile Iron pressure pipes for water,
gas and sewage with Socket Spigot ends conforming to IS.:
8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter
1 for classification K9 & K7 suitable for push-on-joint (rubber
gasket d jointing) with cement mortar lining inside the pipes
with outside zinc coating. Rates are ex-factory, excluding
Nominal Dia in mm Rmt K7 K9
100 Rmt 911 1085
150 Rmt 1263 1604
200 Rmt 1760 2142
250 Rmt 2359 2811
300 Rmt 3030 3561
350 Rmt 3812 4438
400 Rmt 4625 5350
450 Rmt 5562 6401
500 Rmt 6628 7447
600 Rmt 8818 9822
700 Rmt 11407 12693
750 Rmt 12780 14245
800 Rmt 14126 15719
900 Rmt 17234 19170
1000 Rmt 20430 22727
1100 Rmt 24317
1200 Rmt 28427
Centrifugally cast (Spun) Ductile Iron pressure pipes for water,
gas and sewage with plain ends conforming to
IS:8329/2000in standard working lengths of 4, 5, 5.5 & 6
2 meter for classification K9 & K7 with cement mortar lining
inside the pipes with outside zinc coating. Rates are ex-
factory, excluding transportation, taxes & duties.
Nominal Dia in mm K7 K9
100 Rmt 778 996
150 Rmt 1121 1463
200 Rmt 1590 1987
250 Rmt 2069 2638
300 Rmt 2722 3337
350 Rmt 3417 4146
400 Rmt 4134 4997
450 Rmt 4950 5905
500 Rmt 5891 7048
600 Rmt 7800 9097
700 Rmt 10324 11540
352
750 Rmt 11546 12930
800 Rmt 12770 14276
900 Rmt 15441 17263
1000 Rmt 18357 20522
1100 Rmt 21851
1200 Rmt 25433
Centrifugally cast (Spun) Ductile Iron pressure pies with flanged
(welded) ends for water, gas, sewage conforming to IS:
8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for
3 classification K9 with cement mortar lining inside the pipes with
outside zinc coating. ratesareex-factory, excluding transportation,
taxes & duties.
1.0 Mt. 2.0 Mt.
Nominal Dia in mm
Length Length
100 Each 3793 4948
150 Each 5364 7046
200 Each 7101 9395
250 Each 9274 12335
300 Each 11599 15467
350 Each 18155 22956
400 Each 22466 28266
450 Each 27130 33973
500 Each 32867 40901
600 Each 46520 57087
700 Each 55472 68879
800 Each 68391 84978
900 Each 81515 101570
1000 Each 104604 128444
1100 Each 121749 147180
3.0 Mt. 4.0 Mt.
Length Length
100 Each 6101 6696
150 Each 8729 9718
200 Each 11693 13189
250 Each 15397 17427
300 Each 19329 22001
350 Each 27760 30498
400 Each 34067 36936
450 Each 40814 44108
500 Each 48936 52716
600 Each 67653 72168
700 Each 82289 88385
800 Each 101560 109183
900 Each 121626 131056
1000 Each 152286 162401
1100 Each 173124 204955
353
5.0 Mt.
Length
100 Each 7825
150 Each 11388
200 Each 15484
250 Each 20484
300 Each 25874
350 Each 35299
400 Each 42730
450 Each 50946
500 Each 60737
600 Each 82710
700 Each 101769
800 Each 125736
900 Each 155476
1000 Each 186197
1100 Each 220220
Conveyance of Ductile Iron Pressure Pipes and accessories WELDED
4 including loading at Factory, un-loading at site and stacking for DOUBLE
Class
the following sizes FLANGED
PIPES
SIZE IN MM UNIT K7 K9 K9
100 Per KM/RMT 0.22 0.22 0.33
150 Per KM/RMT 0.33 0.33 0.44
200 Per KM/RMT 0.33 0.44 0.66
250 Per KM/RMT 0.44 0.55 0.88
300 Per KM/RMT 0.66 0.66 1.10
350 Per KM/RMT 0.77 0.88 1.32
400 Per KM/RMT 0.88 0.99 1.54
450 Per KM/RMT 1.10 1.21 1.87
500 Per KM/RMT 1.32 1.43 2.20
600 Per KM/RMT 1.87 1.87 2.86
700 Per KM/RMT 2.75 2.75 4.18
750 Per KM/RMT 3.30 3.30 5.06
800 Per KM/RMT 5.61 5.61 8.36
900 Per KM/RMT 5.61 5.61 8.36
1000 Per KM/RMT 5.61 5.61 8.36
1100 Per KM/RMT 5.61 5.61 -
1200 Per KM/RMT 6.00 6.00
Supply and Delivery of Polyethylene (PE)Sleeves for Ductile
5 Iron Pipes used to guard the pipe against corrosion.
DIA IN MM
100 MM DIA RMT 41.00
354

400 MM DIA RMT 127.00
450 MM DIA RMT 127.00
500 MM DIA RMT 154.00
600 MM DIA RMT 154.00
700 MM DIA RMT 200.00
750 MM DIA RMT 200.00
800 MM DIA RMT 200.00
900 MM DIA RMT 227.00
1000 MM DIA RMT 227.00
1100 MM DIA RMT 227.00
Additional price for HAC(high alumina cement motar lining)
6
DIA IN MM
100 MM DIA RMT 55
150 MM DIA RMT 73
200 MM DIA RMT 89
250 MM DIA RMT 106
300 MM DIA RMT 114
350 MM DIA RMT 130
400 MM DIA RMT 178
450 MM DIA RMT 178
500 MM DIA RMT 220
600 MM DIA RMT 220
700 MM DIA RMT 282
750 MM DIA RMT 282
800 MM DIA RMT 282
900 MM DIA RMT 322
1000 MM DIA RMT 322
1100 MM DIA RMT 322
1200 MM DIA RMT 322
Price Variation Formula due to Increase / Decrease in the cost of pig iron. P2=P1+ (R2-
R1)/1000*M*0.96, Where
M = Weight of pipe in kg per metre as per I.S.8329-2000. P2 =
Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of preparation of estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation of SoR
=Rs.27,500/-
355
23. S o R FOR DUCTILE IRON FITTINGS FOR THE YEAR 2014-15
Sl. No. Description Unit
1 2 3
Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having
dimensions as per table. The rates mentioned here under are for fittings, zinc coated
externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-
works) Excluding Transportation, Taxes and Duties etc.
I DI double socket branch flange Tee

Upto 500 x 500 mm dia Kg 101.00
Above 500 x 500 mm dia Kg 113.00
II DI All Socket Tees

Upto 300 x 300 mm dia Kg 101.00
III DI Double socket Tapers (Reducer)

Upto 500 x 450 mm dia Kg 101.00
IV DI Flanged Socket
Upto 500 mm dia Kg 101.00
Above 500 mm dia Kg 113.00
V DI Flanged Spigot
VI DI Double Socket Duck Foot Bend

Upto 300mm dia Kg 101.00
Above 300mm dia Kg 113.00
VII DI Double Flange Duck/Foot bend

VIII DI All socket Cross.

Upto 300 x 300 mm dia Kg 101.00
IX DI All Flange Tee

Upto 500 x 500 mm dia Kg 101.00
X DI All Flange Cross

Upto 300 x 300 mm dia Kg 101.00
356
XI DI Double Flange Reducer

Upto 500 x 450 mm dia Kg 101.00
XII Blank Flange

XIII Mechanical Joints

XIV DI Double Socket Bends

XV DI Double Flanged Bends

357
24. S o R FOR RUBBER GASKETS SUITABLE FORC.I/ D.I. S/S PIPES
S.S Rates
Sl. Description Unit For
No.
2014-15
1 2 3 4
Manufacture as per BIS:12820/89 with S.B.R. Quality Rubber
confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets
suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination
departmental stores including cost of material, loading, incidental
1 handling with companies standard packing, transportation, unloading
& stacking but excluding central excise duty, sales tax, octroi and
other Govt. Levies etc., complete.
80mm dia Each 63

100mm dia Each 98
125mm dia Each 117
150mm dia Each 143
200mm dia Each 174
250mm dia Each 194
300mm dia Each 295
350mm dia Each 374
400mm dia Each 408
450mm dia Each 439
500mm dia Each 609
600mm dia Each 722
700mm dia Each 959
750mm dia Each 1065
800mm dia Each 1277
900mm dia Each 1541
1000mm dia Each 1686
358
25. S o R FOR CI PIPES AND SPECIALS FOR THE YEAR 2014-15
Rate/ Kg including
packing,
forwarding, Transit
Sl. Quality or risk and delivery
No. Description sort any where in A.P.
for the year 2014-
15.
Rs.
1 2 3 4
I.S. No.
Manufacture, Supply and Delivery of Cast Iron Pipes 7181/1986
and Fittings (spls.) Conforming to IS. No. 7181/1986, 5531/1988
5531/1988, 3950/1979 and C.I.D Joints confirming to 3950/1979
is No.8794/1988 at site of work anywhere in A.P. & 73.70
Including, loading, unloading, transportation to site of 8794/1988
work stacking at site transit risk and package,
excluding taxes and duties.
Foot Note: The rate of CI pipes, CI Specials and CID Joints etc., which are to be incorporated in the SSR are
based on the following raw materials cost.
Pig Iron: Rs.27,500/- per M.T.(excluding CED, Tax & Fright)
Coke : Rs.36,570/- per M.T. .(Excluding CED, Tax & Fright)
The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the following
method. For every increase/decrease of Rs.1000/- in the cost of raw materials or part there of proportionately.
In respect of Pig Iron: The increase/decrease in cost of CI Specials per Kg is 3.43%.
In respect of coke: The increase/decrease in cost of CI Specials per Kg is 0.67%.
The above price is at site of work , Excise duty, CST/VAT extra as applicable at the time of supply.
359
26. S o R FOR WATER HAMMER CONTROL DEVICES FOR THE YEAR 2014-15
(Rate Each in Rs.)
TEST PRESSURE
Additional
Sl. charges for
Description 10 15 2 25 Flanged
No. 20 Kgs/cm
2 2 2 ended valves
Kgs/cm Kgs/cm Kgs/cm
1 2 3 4 5 6 7
Manufacture, supply and
delivery of zero velocity valve/
PSLV with CI body with
1 flanged ends as per AWWA,
ex-factory
excluding transportation, central
excise duty and sale tax etc.,
complete.
DIA IN MM
Rate/Each Rs. Rs. Rs. Rs.
150 70275 82031 86878 95568
200 73417 84428 90762 99836
250 82835 95259 102404 112645
300 93220 107203 115246 126768
Manufacture, Supply and
delivery of zero velocity valve/
PSLV with MS Fabricated Body
with Plain ends. as per
2 AWWA, Ex- factory excluding
transportation, Central Excise
duty and sale tax etc. Complete
DIA IN MM Rate/ Each Rs. Rs. Rs. Rs. Rs.
350 99288 114180 122744 135017 8603
400 109748 126209 135675 149248 10373
450 127645 146793 157802 173583 12396
500 147526 169653 182378 200616 13410
525/550 158460 180138 198399 218238 17330
600 177423 204035 219338 241272 24722
650 198604 218467 248321 268056 27957
700 231497 254772 289434 312583 33396
750 256416 282094 320552 346231 37494
800 312360 359217 386155 424768 42251
360
900 371260 426949 450341 504868 51107

1000 450341 450341 450341 625798 64894
1050 454844 454844 454844 658915 67491
1100 573755 650592 709321 780255 75142
1200 690565 759637 865389 932309 85008
1400 1035848 1139453 1298084 1398459 119543
1500 1206940 1327622 1508641 1629199 121934
1600 1231078 1354172 1538815 1661780 127513
Manufacture, Supply and
delivery of Air Cushion valves /
Quick Released damped Air
Valves (QRDA) as per AWWA,
3 Ex-factory excluding
trasportation, Central Excise
duty and sale tax etc., complete.
DIA IN MM Rate/Each Rs. Rs. Rs. Rs.
100 64263 73904 81293 89419
150 97659 112308 123538 135892
200 104237 119871 131860 145045
Conveyance of valves and
accessories including
4 loading at factory and 10% on basic cost of valves
unloading, stacking at site of
work.
361
27. S o R FOR CAST STEEL VALVES FOR THE YEAR 2014-15.

Sl.No. Description TEST PRESSURES
1 2 3 4 5 6
Manufacture, Supply and Delivery of Cast
Carbon Steel rising / Non rising spindle
sluice valve design standard as per
IS:14846/2000 for Water Supply Scheme
with SS Spindle & SS Working parts the Class-150 Class-300
grade of Cast Steel for body Bonnet, Body Body 1100
1 Dome, Stool Cover, Wedge, Stuffing Box, 425PSI PSI Seat 750 FOR Enclosed Spur
Gland Thrust Plate, shall be as per IS : 1030 Seat 300 PSI PN-30 Gear Arrangement.
/ 1989. (The valve shall be used for High PSI PN-
pressure schemes & pumping stations) 20
excluding transportation, Central Excise
duty and sale tax etc., complete. ISI Marked
Rate/Each Class 150 Class 300
DIA IN MM Rs. Rs. Rs.
40 5729 11458
50 9440 17185
65 11814 21482
80 14169 25779
100 18897 34371
125 24235 44065
150 28354 51556
200 45794 93089 56048 102409
250 64454 146517 74708 155839
300 81420 185074 91673 194395
350 108570 246766 122552 259477
400 220547 501243 234529 513954
450 247206 550816 261189 563528
500 290831 660979 304813 673691
600 332031 753517 346014 766228
700 642251 656233
750 690723 710298
800 799784 819359
900 945201 964776
1000 1211796 1231370
1100 1308739 1328314
1200 1478390 1497965
362
Manufacture, Supply and delivery of Cast

Carbon Steel Bolted Cover Non Return
Valve as per IS : 5312 / Part1
/ 1984. Round body heavy duty material
2 spec. As per IS:1030/1989 with SS Hinge &
Seat Rings. excluding transportation,
Central Excise duty and sale tax etc.,
complete. Dia in mm.
Rate/Each Rs. PN-20 PN-30

40 5695 10356
50 8475 15422
65 10591 19279
80 12710 23135
100 17439 30847
125 21813 39660
150 23983 43624
200 36354 79317
250 50896 132196
300 72707 165245
350 96944 220327
400 198735 451669
450 222971 506751
500 261748 594882
600 302948 688519
Steel Multi Door Type Non return Valve as
per IS; 5312/ Part II
3 / 1984 Heavy duty material spec. as per PN-20
1030/1989 with SS hinges & Seat Rings
excluding transportation, Central Excise
duty and sale tax etc., complete.
Rate/Each
500 440652
600 550816
700 660979
750 815208
800 1211796
900 1454154
1000 1586349
1100 1872775
363
1200 1894807
Steel D/F Butter fly Valves conforming to
IS; 13095/1991 manually heavy duty Gear
4 operation, excluding transportation, Central
Excise duty and sale tax etc., complete.
DIA IN MM PN- PN-2.5
Rate/Each 1.0/1.6
300 84104 104843

350 113138 142171
400 135950 176273
450 164752 208532
500 187795 239639
600 218902 281115
700 343330 426282
750 426282 529972
800 467758 581817
900 529972 664769
1000 841043 1048423
1100 1048423 1359493

1200 1255803 1359493
1300 1682084 1877944
1400 1774253 1981634
1500 1877944 2085324
1600 2189014 2500085
1800 2707465 2914845
2000 3744366 4055436
Conveyance of valves and accessories
including loading at factory and unloading, 10% on basic cost of
5
stacking at site of work. valves
Note : The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
364
28. S o R FOR DI D/F VALVES FOR THE YEAR 2014-15.Rate/Each in Rs.

Sl. TEST PRESSURE
No. Description
PN 10 PN 16
1 2 3 4 5 6
Manufacture, supply and delivery of Single Chamber DI
Air Valve with Body and cover in Ductile Iron of grade
SG 400/12 or equivalent grade as per I.S.3896-part2-
1985 and subsequent revisions. All internal parts such as
1 float, shell etc., all cover bolts, of stainless steel, and
Gaskets and seals of EPDM food grade quality Epoxy
powder coating (EP-P) inside and outside colour blue.
Drilled as per IS:1538.
DIA IN MM PN 10 PN 16 PN 25
25 (Screwed End) 9009 9009
32 (Screwed End) 17919 17919
40 (Screwed End) 18810 18810
50 32363 32363 41642
80 43175 43175 43175
100 50408 50408 57968
150 61366 61366 70132
200 67210 67210 78168
300 108900 108900 119900
Manufacture, Supply and delivery of DI D/F Gate Valves
(Soft Seated) Resilient seated soft sealing gate valves
(Sluice valves) with body bonnet of ductile cast iron of
grade GGG40/ SG 400/12 or equivalent grade as per
I.S.3896-part2- 1985 and subsequent revisions, wedge
fully rubber lined with EPDM food grade quality and
2 seals of NBR and the valves should be of vacuum
tight and 100% leak proof with face to face dimensions
as per BS5163-89/IS14846- 2000/DIN 3202 F 4. All the
valves should be with Electrostatic powder coating both
inside and outside pocket less body passage. Drilled as
per IS:1538.
50 7747 7747 13094
80 9922 9922 16144
100 13088 13088 18304
150 20607 20607 30531
200 34244 34244 51495
250 47429 47429 76487
365
300 71682 71682 124065

350 217030 217030 363053
400 227631 227631 369274
450 With By-pass & Gear 391622 391622 736134
500 With By-pass & Gear 415877 415877 781725
600 With By-pass & Gear 535531 535531 1006636
Manufacture, Supply and delivery of DI D/F Butterfly
Valves with GGG40/SG 400/12 or Equivalent grade as per
I.S.3896-part 2-1985 and subsequent revisions, Double
eccentrically Disc., with renewable soft seal on the disc
and Body seat face of stainless steel / nickel weld
3 overlay, with powder or liquid Epoxy coating with
minimum thickness of 250 microns applied on both
body and disc inside and outside. Face to face
dimensions as per AWWA C 504 or BS 5155 or IS:13095.
Drilled as per IS: 1538/ISO
DIA IN MM PN 10 PN 16 PN 25 PN 40
150 82590 82590 85256 113188
200 89954 92874 109124 137629
250 104808 107855 126328 192858
300 125059 128741 143595 202507
350 143087 156102 181811 220409
400 180221 204182 237727 336972
450 197850 219588 279661
500 199731 235759 374904 416406
600 261775 369600 435149 456271
700 516789 545294 819554
800 560262 583871 1196170
900 732712 732712
1000 918489 918489 1734523
1100 1056263
1200 1230671 1230671 1937679
1400 2644951 2644951
1600 3153860 3153860
1800 3868391 3868391
2000 6608212 6608212
2200 9540251 9540251
366
Manufacture, Supply and delivery of DI D/F Swing Check

Valves Slanted/Straight seated with metallic, corrosion
proof and wear resistant seat faces resilient seat, Body
and Disc of ductile cast iron GGG 40/SG Iron 420/12 or
4 equivalent grade as per IS 3896(part2)-1985 and
subsequent revisions. All the inside and outside of the body
is to be coated with double coating of epoxy liquid.
Drilled as per IS:1538. Specification and Dimensions as
per I.S 5312 or equivalent codes.
DIA IN MM PN 10 PN 16 PN 25 PN 40
100 32726 36362
150 54954 61060
200 83337 88295 129492 169494
250 91714 97269 157270 198726
300 114962 121800 191459 242572
350 135304 143424 217786 264795
400 164364 174194 220520 286762
500 208982 221634 279496 367792
600 313546 332395 412024 532563
700 452569 493551 603279 765019
800 565875 616721 760709 963725
Manufacture, supply and delivery of DI (Ductile Iron)

Wafer Butterfly valves conforming to IS 13095-1991.
With hand lever below 150 mm, with Worm gear for 200
5 mm and above excluding transportation, CED and taxes
etc, completed
DIA IN MM PN 10 PN 16
40 5610 5610
50 5610 5610
65 6071 6071
80 6620 7255
100 9307 9648
125 11696 11696
150 15795 16137
200 21430 21430
250 28518 28518
300 40127 40127
350 48695 52824
367
Manufacture and supply of “Air Release – Vacuum Break –

Surge Alleviation” Valve for potable water. Construction
material Cylindrical Body of Ductile Iron GGG-50/SG-500-
7, Three cylindrical Floats of High Density Poly Ethylene.
6 Baffle Plate, Orifice venture and all construction bolts of
stainless steel, coating internally and externally.
Electrostatically applied epoxy (1) Flange connection as per
IS 1538, (2) Female (BSP/NTP Threaded for sizes 25 mm
25 mm dia 14814 - -
50 mm dia - 47740 47740
80 mm dia - 74896 74896
100 mm dia - 82583 82583
150 mm dia - 169358 169358
200 mm dia - 254354 254354
Manufacturer and supply of Metal Seated Gate Valve Non-
Rising Stem with by-pass & gear operated, for water and
sewage applications& dimensions confirming to IS 14846-
2000. Material construction Body, Bonnet, Wedge and
Distance Piece of ductile iron GGG-50/SG500/7 DIN1693
or equivalent. Body seat, Wedge seat and Stem nut of
Aluminum Bronze BS EN 1982 CC331G/equivalent, Stem of
7 Stainless steel BS EN 100881.4057 or equivalent. 'O' Seal
Body/Cover is of EPDM food grade Quality. Fastners is of
Steel Sheraplex coated to BS 3692 Gr 8.8 or equivalent.
Body and Bonnet internally and externally blue two pack
epoxy to WIS 4-52- 01 Class B. Leakage tested for seat 1.1
PN and body 1.5 x PN. Flange connection as per IS 1538
DIA IN MM PN 10 PN 16
DN700 1372190 1372190
DN800 1734934 1734934
DN 900 1961180 1961180
DN 1000 2197338 2197338
DN 1100 3403190 3403190
DN 1200 2994069 2994069
NOTE:-All the prices are ex-go down /ex-factory. Excise duty and CST /Local Tax Extra as applicable at the
time of supply. Packaging and Transportation extra at 5% on basic cost. The duties and taxes as applicable may
be added as per rules at the time of preparation of estimate. The grade of DI & conformation to specifications
shall be certified by a third party Quality Control Agency approved by indenting authority at the cost of
supplier.
368
29. S o R FOR SFRC MAN-HOLE FRAME WITH COVERS FOR THE YEAR 2014-15
Sl.No. Description Unit SoR for

2014-15.
1 2 3 4
Manufacture as per BIS:12592 (Part 1&2) Supply &
Delivery of manhole covers and frames with ISI
marking anywhere in A.P.,
I F.O.R. destination including, loading, unloading & Rs.
stacking at site but excluding central excise duty, sales
tax, octroi and other Govt levies etc., as applicable.
I.S.I Mark
a) M.D. -10 with 500mm diaclear opening Each 1543
b) H.D.-20 with 500mm diaclear opening Each 1989

C) H.D.-10with 560mmdia clear opening(New item) Each 1560
d) H.D.-20 with 560mm diaclear opening Each 2133
e) H.D.-35 with 560mm diaclear opening. Each 2286
f) 24x24 MD 10 Each 1682
g) 24x18 MD 10 Each 1548
h) 24x24 HD 20 Each 1890
i) 24x18 HD 20 Each 1927
j) Deviders 0.9 mtr. Each 3957
Manufacture as per company’s standard specification

supply and delivery of encapsulated plastic steps for
man holes anywhere in A.P. including cost of materials
II packing as per company’s standards, loading, Each 166
transportation, unloading and stacking at site of work
etc, complete but excluding taxes such as sales tax,
C.E.D and others etc., as applicable.
369
30. S o R FOR CI and M.S. DISMANTLING JOINTS FOR THE YEAR 2014-15
Sl.No. Description Unit 2014-15.
1 2 3 4
Manufacture, Supply and Delivery of C.I Dismantling Joints with both side
1 flange end suitable for installation in between flange end pipes. These rates Rs.
are excluding Excise duty, Taxes and transportation charges etc., complete.
Nominal Dia. In MM
50 Each 4387
80 Each 4802
100 Each 6301
125 Each 8102
150 Each 8888
200 Each 12604
250 Each 15004
300 Each 24008
Manufacture, Supply and Delivery of M.S. Dismantling Joints with both side
2 flange end suitable for installation in between flange end pipes. Thickness Each
as per IS: 7322. These rates are excluding Excise duty, Taxes and
transportation charges etc., complete
Nominal Dia. In MM
350 56938
400 65245
450 70786
500 84723
600 98586
700 109677
750 112452
800 134633
900 140459
1000 168248
1100 182138
1200 209924
1300 237707
1400 266032
1600 293872
1800 348005
2000 433076
Conveyance of joints and accessories including loading at factory and 5% on
3 unloading, stacking at site of work. basic cost
The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
Note:
370
31. OTHER ITEMS FOR THE YEAR 2014-15
Sl. S.S. Rates

No. Description Unit for
2014-15.
1 2 3 4
SUPPLY AND DELIVERY OF PIG LEAD 99.99
1 Per Kg
% PURE INCLUDING TAXES AND
CONVEYANCE ETC., COMPLETE. 319
SUPPLY AND DELIVERY OF LEAD WOOL BEST

2 Per Kg
QUALITY INCLUDING TAXES AND CONVEYANCE
168
ETC., COMPLETE.
SUPPLY AND DELIVERY OF SPUN YARN OF BEST

3 QUALITY INCLUDING TAXES AND CONVEYANCE Per Kg 128
ETC., COMPLETE.
SUPPLY AND DELIVERY OF RUBBER PACKING

4
INCLUDING TAXES AND CONVEYANCE ETC.,
COMPLETE.
a) 3 mm thick Per Kg 103

b) 6 mm thick Per Kg 103
SUPPLY AND DELIVERY OF BOLTS AND NUTS

5 WITH DOUBLE WASHERS INCLUDING TAXES AND Per Kg 123
CONVEYANCE ETC., COMPLETE. (1/2" TO 1")
371
32. S o R FOR RUBBER RINGS SUITABLE FOR
SWG PIPES FOR THE YEAR 201-15
S.S Rates
No. 2014-15
1 2 3 4
Manufacture Supply of Rubber Rings made with EPDM Rubber Rings
(seals according to EN681 AND ASTM 425) suitable for SWG pipes
confirming to IS No.651/1992 any where in A.P , For including cost of
materials, loading, unloading , handling with company standard packing ,
1 transportation, unloading and stacking but excluding central excise duty
and other taxes etc complete. The Rubber Rings shall be tested at the
factory premises confirming to I.S No.651/1992
100 mm dia Each 53
150 mm dia Each 80
200 mm dia Each 120
230 mm dia Each 146
250 mm dia Each 186
300 mm dia Each 213
350 mm dia Each 253
33. S o R FOR TRENCH LESS TECHNOLOGY WITH PIPE JACKING METHOD FOR THE
YEAR 2014-15
S.S Rates
No. 2014-15
1 2 3 4
Railway crossing/Road crossing/Canal crossing by adopting trenchless
technology tunneling work through specialized pipe jacking method by
erecting the equipment to true to the alignment and gradient, by
hydraulic pipe jacking technique complete including tunneling,
excavation in all types of soils including hard rock and construction of
1 RCC chambers suitable to casing pipe pits, and conveyance charges of
machinery and other required materials but excluding cost of encasing
pipe, in co-ordination with the concerned authorities as per approved
drawings and directed by the Engineer-in – Charge.
800 mm dia Rmt 26000
900 mm dia Rmt 27300
1000 mm dia Rmt 28600
1100 mm dia Rmt 29900
1200 mm dia Rmt 31200
1300 mm dia Rmt 32500
1400mm dia Rmt 35100
1500 mm dia Rmt 39000
372
ANNEXURE
373
Annexure - Common SoR: 2014-15
Copy of
GOVERNMENT OF ANDHRA PRADESH
ABSTRACT
Mines and Minerals - Amendments to Rule 10 of the Andhra Pradesh Minor Mineral
Concession Rules, 1966 - Orders - Issued.
-----------------------------------------------------------------------------------------------------------
INDUSTRIES AND COMMERCE (M.I) DEPARTMENT
G.O.Ms.No.198. Dated:13.08.2009
Read the following:
1. G.O.Ms.No.217, Industries & Commerce (M-I) Dept., dated 29-09-2004.

2. From the Director of Mines & Geology, File No.25395/MR/ 2007, Dated:29.9.2007.
3. G.O.Ms.No.104, Ind. & Com. (M.I) Department, dt.15.5.2009.
***
ORDER :
The following notification will be published in the Extra-Ordinary issue of the Andhra Pradesh Gazette dated
13.8.2009.
2. This order shall come into force with immediate effect.
NOTIFICATION
In exercise of the powers conferred by sub-section (1) of section 15 of the Mines and Minerals (Development &
Regulation) Act,1957 (Central Act 67 of 1957), the Governor of Andhra Pradesh hereby makes the following
amendments to the Andhra Pradesh Minor Mineral Concession Rules, 1966 issued in G.O.Ms.No.1172, Industries and
Commerce(M-I) Department, dated 04-09-1967 and subsequently amended from time to time.
AMENDMENTS
In the said rules, Under Rule 10 for Schedules I and II the following shall be substituted, namely :
“SCHEDULE -I
RATES OF SEIGNIORAGE FEE
Sl.No. Name of the Minor Unit Rate of Seigniorage Fee
Mineral (in Rupees)
1 2 3 4
1 Building Stone 3 Rs.50/33 (Rupees Fifty /Thirty Three)
M /MT
2 Rough Stone/Boulders 3 Rs. 50/33 (Rupees Fifty /Thirty Three)
M /MT
3 Road Metal & Ballast 3 Rs. 50/33 (Rupees Fifty /Thirty Three)
M /MT
3(a) Dimensional Stone used for Kerbs MT Rs.88/- (Rupees Eighty Eight)
& Cubes
4 Limekankar / Limestone MT The rate of Royalty as applicable to limestone (other
than L.D. Grade) in respect of Major Mineral as per
the 2nd Schedule of the Mines and Minerals (D&R)
Act, 1957.
374
5 Lime Shell MT Rs.88/- (Rupees Eighty Eight)
3
6 Marble M /MT Rs. 165/66 (Rupees One hundred
and Sixty Five/Sixty Six)
7 Mosaic Chips MT Rs. 44/- (Rupees Forty Four)
3
8 Muram/Gravel & M /MT Rs. 22/14 (Rupees Twenty Two/
Ordinary earth Fourteen)
3
9 Ordinary sand/Sand manufactured M Rs. 40/- (Rupees Forty)
from
Boulders 3
10 Shingle useful for Civil M Rs. 17/- (Rupees Seventeen)
11 Chalcedony Pebbles MT Rs. 33/- ( Rupees Thirty Three)
12 Fullers Earth/Bentonite MT Rs. 110/- (Rupees One hundred
and Ten) and Rs.44/- (Rupees
Forty Four)
13 Shale/Slate MT Rs. 110/- (Rupees Hundred and

Ten )
14 Rehmati MT Rs. 17/-(Rupees Seventeen )
15 Limestone slabs
a(i) Colour Rs. 7/- (Rupees Seven) per Sq.
Mt. or Rs. 88/-(Rupees Eighty Eight) per MT
- whichever is higher
(ii) White Rs. 5/-(Rupees Five)per Sq. Mt. or Rs. 55/-(Rupees Fifty
- Five) per MT. whichever is higher
(iii) Black Rs. 4/- (Rupees Four) per Sq. Mt. or Rs. 44/- (Rupees
Forty Four) per Mt. whichever is higher
-
16 Ordinary clay, Silt and Brick Earth Rs. 3850/- (Rupees three thousand eight hundred and
used in the manufacture of Bricks -- fifty only) per kiln per annum for Bricks and Tiles
including
17. Granite Useful for Cutting:
(Rates in Cubic Metre)

Mini Gang
Super Gang Saw above
Item Saw above 270 Cm X Below 270
300 150 Cm. & Cm. Below 75 Cm.
CMX 180 less than 300 X 150 Cm. size Size
CM. Size Cm X 180
Cm Size
Black Granite Rs. 3300/- Rs. 2625/- Rs. 2475/- Rs. 1100/-
Galaxy Variety (Rupees (Rupees Two (Rupees Two (Rupees One
Three thousand Six thousand Four thousand One
(a) Thousand hundred and hundred and hundred only)
Three twenty five only) Seventy Five only)
hundred)
Black Granite other Rs. 2475/- Rs.2000/- Rs.1,925/- Rs.825/-

than Galaxy (Rupees Two (Rupees Two (Rupees One (Rupees Eight
Variety thousand thousand only) thousand Nine hundred and
(b) Four hundred and hundred and Twenty Five
Seventy Five only) Twenty Five only) only)
375
Colour Granite Rs. 2475/- Rs.2000/- Rs.1925/- Rs.825/-
Srikakulam Blue, (Rupees Two (Rupees Two (Rupees One (Rupees Eight
Indian aurora of thousand thousand only) thousand Nine hundred and
Nizamabad Dist., Four hundred and hundred and Twenty Five
(c ) Leptinites of Seventy Five only) Twenty Five only) only)
Coastal Dists., Black
pearl of Praksam
and Guntur Dists.
Colour Granite of RS.1,925/- Rs. 1625/- Rs.1650/- Rs.825/-
other varieties (Rupees One (Rupees One (Rupees One ( Rupees Eight
thousand thousand Six thousand Six hundred and
(d) Nine hundred and hundred and hundred Fifty Twenty Five
Twenty Five only) Twenty five only) only) only)
SCHEDULE –II RATE OF DEAD RENT (PER HECTARE PER ANNUM)
Sl. Name of the Minor Mineral Rate of Dead Rent per

No. hectare per Annum
01 Black Rs.55,000/- (Rupees fifty five
Granite thousand only)
02 Colour Rs.44,000/- (Rupees
Granite forty four thousand only)
03 Limestone other than classified as Major Minerals used for Lime
burning for building construction purposes, Marble, Boulders, Rs.27,500/- (Rupees twenty seven
Building Stone Including Stone used for Road Metal, Ballast thousand and five hundred only)
Concrete and other Construction purposes, Shale, Slate and
Phyllites, Mosaic Chips, Fuller’s Earth/Bentonite & Dimensional
Stones used for cubes & kerbs,
04 Gravel, Morrum, Shingle, Limestone Slabs used for Flooring
purposes Limekankar, Chalcedeny pebbles used in the building Rs.16,500/- (Rupees sixteen thousand
purposes Limeshell for burning used for building purposes and and five hundred only)
Rehmatti.
NOTE:- 1) The above rates are liable to be revised and amended from time to time by the State
Government by notification in the Andhra Pradesh Gazette.
2) In case of revision, the revised rates as fixed by Mines and Geology Department have
to be adopted.
376

Buildings SoR 2014-15 PDF

Uploaded by

Copyright:

Available Formats

Buildings SoR 2014-15 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Buildings SoR 2014-15 PDF

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF ANDHRA PRADESH

BUILDINGS – SoR: 2014-2015

COMMITTEE OF CHIEF ENGINEERS

FOR THE YEAR 2014-2015

Office of the Chief Engineer (R&B) Buildings

Procs.No. CEB/TA8/AEE3/B-SoR: 2014-15 Dt: 31-05-2014.

Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., dt:20-04-2007.

Enclosed: Buildings SoR: 2014-15-CD as above

INDEX FOR BUILDINGS SoR: 2014-15

1 Index for Building Civil Items 5 5

3 Building Civil Items - Buildings-SoR-2014-15 14 89

4 List of Approved brands of Building Civil Items 83 83

5 Water Supply & Sanitary Items - Buildings-SoR-2014-15 90 122

7 Electrical Items – Buildings-SoR-2014-15 123 239

8 Common SoR – 2014-15 240 372

9 Annexure 373 376

BUILDINGS SoR: 2014-15

2 SECTION - A BMT - A 01 to 21 BRICKS & BUILDING BLOCKS 14 15

3 SECTION - B BMT - B 01 to 16 NATURAL FLOORING STONES 15 16

4 SECTION - C BMT - C 01 to 53 WALL & FLOOR TILES 16 18

5 SECTION - D BMT - D 01 to 18 PAVING & INTERLOCKING TILES 18 20

6 SECTION - E BMT - E 01 to 20 TIMBER & ROOFING MATERIALS 20 20

7 SECTION - F BMT - F 01 to 33 MILD, GALVANISED & STAINLESS STEEL 20 22

8 SECTION - G BMT - G 01 to 79 FIXTURES FOR DOORS & WINDOWS 22 25

9 SECTION - H BMT - H 01 to 108 WATER PROOFING CHEMICALS & ADMIXTURES 25 31

10 SECTION - I BMT - I 01 to 21 GLASS 31 31

11 SECTION - J BMT - J 01 to 51 PAINTS & POLISHES 31 32

12 SECTION - K BMT - K 1 to 124 PARTICLE BOARDS 32 35

13 SECTION - L BMT - L 01 to 20 PLYWOOD 35 35

14 SECTION - M BMT - M 01 to 116 CEILINGS, WALL PARTITIONS & WALL LININGS 35 45

15 SECTION - N BMT - N 01 to 88 DOORS 45 60

16 SECTION - P BMT - P 01 to 112 WINDOWS 60 72

17 SECTION - Q BMT - Q 01 to 15 STRUCTURAL GLAZING 72 74

18 SECTION – S BMT - S 01 to 15 DISMANTLING 74 75

19 SECTION - T BMT - T 01 to 05 READY MIX CONCRETE 75 75

20 SECTION - U BMT - U 01 to 11 EXPANSION JOINT FILLERS 75 75

21 SECTION - V BMM - V 01 to 50 LABOUR CHARGES 75 78

22 SECTION - W BMS - W 01 to 80 MISCELLANEOUS ITEMS 78 82

2.0 APPLICABILITY OF COMMON SoR – 2014-15

3.0 OVERHEADS & CONTRACTORS PROFIT

b) Technical agents for site supervision. (Reimbursement to the technical

IS 383-1970 and IS 2386 (Part 1 to Part 8).

site, excluding seigniorage (royalty) charges, unloading charges by machinery / manual

site, except where mentioned specifically.

be cumulative and inclusive of lead charges for preceding lead.

disposal of excavated material unless specified.

royalty/seigniorage, transportation and handling costs up to project area, but excluding

G.O.Ms.No.49 I&CAD (PW-Reforms) Dept., dt: 02-03-2009, a special software ACES is

‘COMMITTEE OF THE CHIEF ENGINEERS (Buildings SoR)’ for corrective action.

in the contract documents as per the requirement.

BLD-CSTN-2-9 17 Earth filling (ordinary soil)

M CEILINGS, WALL PARTITIONS & WALL LININGS

LEGEND "BMT" -X.XX

Material Hire Centring Charges Unit of

HIRE CHARGES FOR CENTERING & SCAFFOLDING

A FOOTINGS Rs. 277.00 Rs. 446.00 Rs. 723.00 per 1 cum

E LINTELS Rs. 1133.00 Rs. 1141.00 Rs. 2274.00 per 1 cum

E LINTELS Rs. 2042.00 Rs. 1806.00 Rs. 3848.00 per 1 cum

Material Hire Centring Charges Unit of