I require a list of Transactions and Tables used in QM.Can any one help me.

If u have SAP system

1) go to se16 ,
2) type the table tstc
3) execute .
U will get all trasaction codes .I think all QM transactions starts with Q. I think u can get from this table .

Giving below the imporatant QM transactions and QM tables

QM transactions

QD21 Mark completed notifications

QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates

QM tables
Master Data QMAT Inspection type - material parameters
Master Data QMHU QM Link Between Inspection Lot and Handling Unit Item
Master Data QMTB Inspection method master record
Master Data QMTT Inspection Method Texts
Master Data QPAC Inspection catalog codes for selected sets
Master Data QPAM Inspection catalog selected sets
Master Data QPMK Inspection characteristic master
Master Data QPMT Master Inspection Characteristics Texts
Master Data QPMZ Assignment table - insp. methods/master insp. characteristic
Master Data TQ01D Authorization groups for QM master data
Master Data TQ01E Text authorization groups for QM master data
Master Data TQ21 Assignment of screens to screen groups
Master Data TQ25 QM:screen sequence for master and inspection characteristics
QM Master Data

Catalog QPCD Inspection catalog codes

Catalog QPCT Code texts
Catalog QPGR Inspection catalog code groups
Catalog QPGT Code group texts
Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot
Catalog TQ07A QM: Function Modules for Follow-Up Action
Catalog TQ07T Language-dependent texts for Table TQ07
Catalog TQ15 Inspection catalog type index
Catalog TQ15T Language-dependent texts for table TQ15
Catalog TQ17 Defect classes
Catalog TQ17T Language-dependent texts for table TQ17
Catalog

Sample Determination QDEB Allwd. Relationships: Sampling Procedures/Dynamic Mod. Rules

Sample Determination QDEBT Allowed combinations of procedures/dynamic mod. rules: texts
Sample Determination QDPA Sampling scheme-instructions
Sample Determination QDPK Sampling scheme header
Sample Determination QDPKT Sampling scheme: texts
Sample Determination QDPP Sampling scheme item
Sample Determination QDQL Quality level
Sample Determination

Inspection Char TQ17A Weighting of Char

Inspection Char TQ11 Inspection Qualification
Inspection Char TQ29 Tolerance Keys
Inspection Char T006 Unit of measurement
Inspection Char

Dynamic Modification QDBM Valuation mode

Dynamic Modification QDBMT Valuation Mode: Texts
Dynamic Modification QDDR Dynamic modification rule (header)
Dynamic Modification QDDRT Dynamic modification rule: texts
Dynamic Modification QDEP Allowed inspection severities
Dynamic Modification QDEPT Allowed Inspection Severities: Texts
Dynamic Modification QDFB Function modules for the individual procedure categories
Dynamic Modification QDFBT Function Modules for Procedure: Texts
Dynamic Modification QDFM Function modules for valuation mode
Dynamic Modification QDFMT Function Modules for Valuation Mode: Texts
Dynamic Modification QDPS Inspection stages for a dynamic modification rule
Dynamic Modification QDPST Inspection Stages: Texts
Dynamic Modification QDSA Sampling type
Dynamic Modification QDSAT Sampling Type: Texts
Dynamic Modification QDSV Sampling procedure
Dynamic Modification QDSVT Sampling Procedure: Texts
Dynamic Modification TQ39B QM : Activates reference for dyn. modification level
Dynamic Modification

Graphics & SPC QASH Quality control chart

Graphics & SPC QAST Control chart track
Graphics & SPC QPSH Control chart types
Graphics & SPC QPSHT Texts for control chart types
Graphics & SPC QPSP SPC criterion
Graphics & SPC QPSPT Texts for SPC criteria
Graphics & SPC QPST Control chart track
Graphics & SPC QPSTT Texts for control chart tracks
Graphics & SPC

Specifications QMSP QM: material specification

Specifications

Inspection Plan PLKO Inspection plan Header

Inspection Plan MAPL Material Assignement
Inspection Plan PLPO Operation Details
Inspection Plan PLMK Inspection plan characteristics
Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Inspection Plan TQ03 QSS: Control for Screen Texts/TABLE NOT USED (Rel. 4.6)
Inspection Plan TQ29A Dependency tolerance key - nominal measurement
Inspection Plan TQ72 Type of share calculation
Inspection Plan TQ72T Texts for type of share calculation
Inspection Plan TQ75 QM formula parameters
Inspection Plan TQ75F Field names for QM formulas
Inspection Plan TQ75K Short text for Table TQ75F
Inspection Plan TQ75T Description of formula parameters
Inspection Plan

Qm in procurement QINF QM-info record for material and vendor

Qm in procurement TQ02 QM system definition
Qm in procurement TQ02A QM system assignment and QM system requirements
Qm in procurement TQ02B QM system
Qm in procurement TQ02T QM system description
Qm in procurement TQ02U Description QM system
Qm in procurement TQ04A Functions that can be blocked
Qm in procurement TQ04S QM block functions : texts
Qm in procurement TQ05 QM certificate categories for procurement
Qm in procurement TQ05T QM: text table for certificate types
Qm in procurement TQ08 Control of QM in procurement
Qm in procurement TQ08T QM: text for QM procurement keys
Qm in procurement TQ09 QM: agreement of QM document types
Qm in procurement TQ09T QM: agreement of QM document types
Qm in procurement TQ32A Inspection type to status assignment from status profile
Qm in procurement

QM in SD QVDM QM Info Record - QM Control in SD

QM in SD TQ32B Find insp.type for quality insp. for delivery note
QM in SD

Inspectio lot QALS Inspection lot record

Inspectio lot QALT Partial lot
Inspectio lot T156Q Movement Type: Material-Independent Control
Inspectio lot TQ30 Inspection types
Inspectio lot TQ30T Texts for inspection types
Inspectio lot TQ32 Assignment of inspection type to origin
Inspectio lot TQ32C Lot creation allowed values for the origin
Inspectio lot TQ32C _T Texts for lot creation indicator
Inspectio lot TQ33 Relevant fields for origin
Inspectio lot TQ34 Default values for inspection type
Inspectio lot

Inspection point QAPP Inspection point

Inspection point TQ79 Table with inspection point/user field combinations
Inspection point TQ79T Key words for inspeciton point user fields
Inspection point

Results Recording QAES Sample unit table

Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording

Defects recording TQ84 Confirmation profile

Defects recording TQ84T Text table for confirmation profile
Defects recording TQ86 Report category for defects recording
Defects recording TQ86A Assignment report category for work center
Defects recording TQ86T Text table for report category
Defects recording V_T35 2B_F Generated table for view V_T352B_F
Defects recording

Usage decision QAMB QM: Link Between Inspection Lot and Material Document
Usage decision QAVE Inspection processing: Usage decision
Usage decision TQ06 Procedure for Calculating the Quality Score
Usage decision TQ06T Language-specific texts for Table TQ06
Usage decision TQ07M QM: Inventory postings with usage decision
Usage decision

Sample Mgmt QPRN Sample drawing of phys. samples

Sample Mgmt QPRS Master record for phys. samples
Sample Mgmt QPRVK Sample-drawing procedure
Sample Mgmt QPRVK T Header for sample drawing procedure texts
Sample Mgmt QPRVP Sample-drawing items
Sample Mgmt QPRVP T Items for sample drawing procedure texts
Sample Mgmt TQ40 Definition of sample types
Sample Mgmt TQ40T Text table for sample type
Sample Mgmt TQ41 Storage locations for physical samples
Sample Mgmt TQ41T Texts for storage locations
Sample Mgmt TQ42 Physical sample containers
Sample Mgmt TQ42T Texts for phys. sample containers
Sample Mgmt

QMIS S068 Vendor statistics

QMIS S069 Material statistics
QMIS S097 QM notifications: Matl anal.
QMIS S098 QM notification: Vendor anal.
QMIS S099 QM notifications: Cust. anal.
QMIS S100 Problems: Material analysis
QMIS S102 Problems: Vendor analysis
QMIS S103 Problems: Customer analysis
QMIS S104 Customer statistics
QMIS S161 Inspection results: General
QMIS S162 Quantitative insp. results
QMIS S163 Quant. Insp. Result: Vendor
QMIS S164 Quant. Insp. Result: Vendor
QMIS S165 Inspection result: gen. custs
QMIS S166 Insp. Results: Quant. Customer
QMIS TQ55 Assign inspection lot origin for update group
QMIS TQ56 Definition of quality score classes
QMIS TQ56T Text table for the definition of quality score classes
QMIS TQ57 Assignment of quality score key to info structure
QMIS

Quality Certificates QCPR QM quality certificates in procurement

Quality Certificates I000 Conditions for certificate profile
Quality Certificates KONDI Conditions: Data part for certificates
Quality Certificates QCVK Certificate profile header
Quality Certificates QCVM Certificate profile characteristic level
Quality Certificates QCVMT Certificate profile characteristic level: texts
Quality Certificates QCVV Certificate Profile: List of Preliminary Products
Quality Certificates TQ61 Result value origin for certificates
Quality Certificates TQ61T Origin of result values for certificates: texts
Quality Certificates TQ62 Output strategy for skip characteristics
Quality Certificates TQ62T Output strategy for skip characteristics: texts
Quality Certificates TQ63 Origin of insp. specs for certificates (function modules)
Quality Certificates TQ63T Origin of inspection specifications for certificates: texts
Quality Certificates TQ64 Origin of characteristic short text for certificates
Quality Certificates TQ64T Origin of characteristic short text for certificates: texts
Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values
Quality Certificates TQ67 Certificate-Relevant Output Types
Quality Certificates

Quality Notification QMEL Notification header

Quality Notification QMFE Item
Quality Notification QMSM Task
Quality Notification QMMA Activities
Quality Notification T352C Catalog types for each catalog profile
Quality Notification TQ81 Notification Scenario
Quality Notification TQ81V Usage of parts
Quality Notification TQ81V_T Texts for usage of parts
Quality Notification TQ81_T Texts for Notification Scenarios
Quality Notification TQ82 Change of Notification Type
Quality Notification TQ83 Partner Functions for Codes
Quality Notification TQ85 Function table for follow-up functions
Quality Notification TQ85R Rules for Follow-Up Functions
Quality Notification TQ85_T Action box text table
Quality Notification TQ8CO Assignment of reference orders to notification type
Quality Notification

Other Objects MARA Material Number

Other Objects T001W Plant
Other Objects LFA1 Vendor
Other Objects KNA1 Customer
Other Objects AUFK Order Number
Other Objects SAFK Run Schedule Header Number
Other Objects MCH1 Batch Number
Other Objects MCHA Batch Record
Other Objects EKKO Purchasing Document Header
Other Objects EKPO Purchasing document Item
Other Objects EKET Delivery Schedule
Other Objects VBUK Delivery Header
Other Objects VBUP Delivery Item
Other Objects CSKS Cost Center
Other Objects EQUI Equipment Number