Section 5.3: Code, Standard, and Regulation
Section 5.3: Code, Standard, and Regulation
Section 5.3: Code, Standard, and Regulation
SECTION 5.3
Table of Contents
Page
1 GENERAL............................................................................................................................ 3
2 LIST OF REFERENCES.......................................................................................................3
PT INDUSTRI NABATI LESTARI Document Number
GENERAL
The codes, standards and regulations referenced in this Document (including addenda,
amendment and errata) shall govern in ail cases where references thereto are made. In
case of conflict between these codes (or standards or regulations) and the requirements
specified in this Document, the latter shall govern.
The codes, standards or specifications applied in each case shall be the latest revision
adopted and published at the bid closing date. Any conflict between standards shall be
referred to the Owner who will determine which standard shall govern and the Owner's
decision will be final.
LIST OF REFERENCES
MECHANICAL
Abbreviation Name and Address
ABMA American Boiler Manufacturers Association
AFBMA Anti Friction Bearing Manufacturers Association, Inc
AGMA American Gear Manufacturer Association 1901 N. Ft. Myer Dr.
Arlington, VA 22209 USA
AISE Association of Iron and Steel Engineers 3 Gateway Centre, Suite
2350 Pittsburgh, PA 15222 USA
AISI American Iron and Steel Institute 150 East 42nd Street New York,
New York 10017 USA
ANSI American National Standards Institute, Inc. 1430 Broadway New
York, New York 10018 USA
API American Petroleum Institute 2101 L. St, N.W. Washington, DC
20037 USA
ARI Air Conditioning and Refrigeration Institute
ASHRAE American Society of Heating, Refrigerating and Air Conditioning
Engineers, Inc
ASME American Society of Mechanical Engineers 345 East 47th Street
New York, N.Y. 10017 USA
ASNT American Society for Nondestructive Testing
ASTM American Society for Testing and Materials 1916 Race Street
Philadelphia, Pennsylvania 19103 USA
AWS American Welding Society 345 East 47th Street New York, New
York 10016 USA
AWWA American Water Works Association 6666 West Quincy Avenue
Denver, Colorado 80235, USA
CMAA Crane Manufacturers Association of America 1326 Freeport Rd.
Pittsburgh, PA 15238, USA
CEMA Conveyor Equipment Manufactures Associated
FM Factory Mutual Insurance Co
HEI Heat Exchanger Institute
HIS Hydraulic Institute Standards 712 Lakewood Centre North 14600
Detroit Avenue Cleveland, Ohio 44107, USA
PT INDUSTRI NABATI LESTARI Document Number
ELECTRICAL
Abbreviation Name and Address
BEAMA British Electrical and Allied Manufacturers Association
CISPR International Special Committee on Radio Interference
(www.iec.ch)
NEC National Electrical Code
NEMA National Electrical Manufacturers Association 2101 L St., N.W.
Washington, DC 20037 USA
NERC North American Electric Reliability Council Research Park,
Terhune Road Princeton, USA
PT INDUSTRI NABATI LESTARI Document Number
INSTRUMENTATION
Abbreviation Name and Address
AABC Associated Air Balance Council
ADC Air Diffusion Council
AMCA Air Movement and Control Association 30 West University Drive,
Arlington Heights, Illinois 6004, USA
CGA Compressed Gas Association 1235 Jefferson Davis Hwy.
Arlington, VA 22202, USA
ISA Instrument Society of America 67 Alexander Drive P.O. Box 12277
Research Triangle Park, North Carolina 27709 USA
PIPING
Abbreviation Name and Address
DIN Deutsche Industrie Normung
EN European Norm
NPT National Pipe Thread
PFI Pipe Fabricators Institute 818 Milan Street North Canal Fulton,
Ohio 44601, USA
SAFETY
Abbreviation Name and Address
MSHA Safety and Health Association
OSHA Occupational Safety and Health Act.20010 Century Blvd.
Germantown, Md 20767 USA
RIIS Research Institute of Industrial Safety, Japan
ENVIRONMENT
Abbreviation Name and Address
EPA Environmental Protection Agency
NEBB National Environmental Balancing Bureau
PT INDUSTRI NABATI LESTARI Document Number