Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    CPWD Specs 2009 V2-39-41 F PDF

    Uploaded by

    maheshnavami
    This document provides guidelines for measuring and calculating the area of painted surfaces for payment. It includes tables of coefficients to calculate the equivalent plain area of uneven surfaces like wood doors, steel doors, fencing, etc. The length and breadth are to be measured accurately in cm and the area calculated in sqm to two decimal places, unless otherwise specified. Small articles under 0.1 sqm or widths under 10 cm are to be enumerated rather than measured by area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CPWD Specs 2009 V2-39-41 F PDF

    Uploaded by

    maheshnavami
    2K views3 pages
    This document provides guidelines for measuring and calculating the area of painted surfaces for payment. It includes tables of coefficients to calculate the equivalent plain area of uneven surfaces like wood doors, steel doors, fencing, etc. The length and breadth are to be measured accurately in cm and the area calculated in sqm to two decimal places, unless otherwise specified. Small articles under 0.1 sqm or widths under 10 cm are to be enumerated rather than measured by area.

    Original Title

    CPWD Specs 2009 V2-39-41 F.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides guidelines for measuring and calculating the area of painted surfaces for payment. It includes tables of coefficients to calculate the equivalent plain area of uneven surfaces like wood doors, steel doors, fencing, etc. The length and breadth are to be measured accurately in cm and the area calculated in sqm to two decimal places, unless otherwise specified. Small articles under 0.1 sqm or widths under 10 cm are to be enumerated rather than measured by area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views3 pages

    CPWD Specs 2009 V2-39-41 F PDF

    Uploaded by

    maheshnavami
    This document provides guidelines for measuring and calculating the area of painted surfaces for payment. It includes tables of coefficients to calculate the equivalent plain area of uneven surfaces like wood doors, steel doors, fencing, etc. The length and breadth are to be measured accurately in cm and the area calculated in sqm to two decimal places, unless otherwise specified. Small articles under 0.1 sqm or widths under 10 cm are to be enumerated rather than measured by area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    A

    EL
    FE
    safe from dust. When the Paint has been used, the containers shall be washed with turpentine and wiped dry
    with soft clean cloth, so that they are clean, and can be used again.

    13.23.6 Measurements

    13.23.6.1 The length and breadth shall be measured correct to a cm. The area shall be calculated in
    sqm (correct to two places of decimal), except otherwise stated.

    13.23.6.2 Small articles not exceeding 10 sq. decimetre (0.1 sqm) of painted surfaces where not in
    conjunction with similar painted work shall be enumerated.

    13.23.6.3 Painting upto 10 cm in width or in girth and not in conjunction with similar painted work shall
    be given in running metres and shall include cutting to line where so required.

    Note : Components of trusses, compound girders, stanchions, lattices and similar work shall, however,
    be given in sq. metres irrespective of the size or girth of members. Priming coat of painting shall
    be included in the work of fabrication.

    13.23.6.4 In measuring painting, varnishing, oiling etc. of joinery and steel work etc. The coefficients as
    indicated in following tables shall be used to obtain the area payable. The coefficients shall be applied to
    the areas measured flat and not girthed.

    TABLE 13.1
    Equivalent Plain Areas of Uneven Surface
    S. Description of work How measured Multiplying
    No. coefficients
    1 2 3 4
    I. Wood work doors, windows Etc.
    1. Panelled or framed and braced Measured flat (not girthed including) 1.30 (for each side)
    doors, windows etc.
    2. Ledged and battened or ledged, Chowkhat or frame, Edges, chocks, - do -
    battened and braced doors, cleats, etc. shall be deemed to be
    windows etc. included in the item.
    3. Flush doors etc. -do- 1.20 (for each side)
    4. Part panelled and part glazed or -do- 1.00 (for each side)
    gauzed doors, window etc.
    (Excluding painting of
    wire gauze portion)
    5. Fully glazed or gauzed doors, -do- 0.80 (for each side)
    windows etc. (Excluding painting
    of wire gauze portion)
    6. Fully venetioned or louvered -do- 1.80 (for each side)
    doors, windows etc.
    7. Trellis (or Jaffri) work one way or Measured flat overall, no deduction 2 (for painting all over)
    two way shall be made for open spaces, sup-
    porting members shall not be mea-
    sured separately
    8. Carved or enriched work Measured flat 2 (for each side)
    9. Weather boarding Measured flat (not girthed supporting 1.20 (for each side)
    frame work shall not be measured
    separately
    10. Wood shingle roofing Measured flat (not girthed) 1.10 (for each side)

    559 SUB HEAD 13.0 : FINISHING


    A
    EL
    FE
    1 2 3 4
    11. Boarding with cover fillets Measured flat (not girthed) 1.05 (for each side)
    and match boarding
    12. Tile and slate battening Measured flat overall no deductions 0.80 (for painting
    shall be made for open spaces all over)

    II. Steel work doors, windows Etc.


    13. Plain sheeted steel doors or Measured flat (not girthed) 1.10 (for each side)
    windows including frame edges etc.
    14. Fully glazed or gauzed steel -do- 0.50 (for each side)
    doors and windows (excluding
    painting of wire gauze portion)
    15. Partly panelled and partly -do- 0.80 (for each side)
    glazed or gauzed doors and
    windows (excluding painting
    of wire gauze portion)
    16. Corrugated sheeted steel doors -do- 1.25 (for each side)
    or windows
    17. Collapsible gates Measured flat 1.50 (for painting
    all over)
    18. Rolling shutters of interlocked Measured flat (size of opening) all 1.10 (for each side)
    laths over; jamb guides, bottom rails and
    locking arrangement etc. shall be in-
    cluded in the item (top cover shall
    be measured separately)

    III. General
    19. Expanded metal, hard drawn Measured flat overall; no deduction 1 (for Paint all over)
    steel wire fabric of approved shall be made for open spaces;
    quality, grill works and gratings supporting members shall not be
    in guard bars, balustrades, railing measured separately
    partitions and MS Bars in
    windows frames.
    20. Open palisade fencing and -do- 1 (for Paint all over)
    gates including standards, (see note No. 12)
    braces, rails stays etc. in timber
    or steel
    21. Corrugated iron sheeting in -do- Measured flat (not girthed) 1.14 (for each side)
    roofs, side cladding etc.
    22. AC corrugated sheeting in roofs, -do- 1.20 (for each side)
    side cladding etc.
    23. AC semi corrugated sheeting in
    roofs, side cladding etc. or -do- 1.10 (for each side)
    Nainital pattern using plain sheets
    24. Wire gauze shutters including -do- 1.00 (for each side)
    painting of wire gauze

    Explanatory Notes for Table 13.1


    (1) Measurements for doors windows etc., shall be taken flat (and not girthed) over all including
    chowkhuts or frames, where provided. Where Chowkhuts or frames are not provided, the shutter
    measurements shall be taken.
    (2) Where doors, windows etc., are of composite types other than those included in Table 1 the
    different portion shall be measured separately with their appropriate coefficients, the centre line
    of the common rail being taken as the dividing line between the two portions.

    CPWP SPECIFICATIONS 2009 560


    A
    EL
    FE
    (3) The coefficients for door and windows shall apply irrespective of the size of frames and shutter
    members.
    (4) In case steel frames are used the area of doors, windows shutters shall be measured flat
    excluding frames.
    (5) When the two faces of a door, window etc. are to be treated with different specified finishes,
    measurable under separate items, the edges of frames and shutters shall be treated with the one
    or the other type of finish as ordered by the Engineer-in-Charge and measurement of this will be
    deemed to be included in the measurement of the face treated with that finish.
    (6) In the case where shutters are fixed on both faces of the frames, the measurement for the door
    frame and shutter on one face shall be taken in the manner already described, while the
    additional shutter on the other face will be measured for the shutter only excluding the frame.
    (7) Where shutters are provided with clearance at top or/and bottom each exceeding 15 cm height,
    such openings shall be deducted from the overall measurements and relevant coefficient shall be
    applied to obtain the area payable.
    (8) Collapsible gates shall be measured for width from outside to outside of gate in its expanded
    position and for height from bottom to top of channel verticals. No separate measurements shall
    be taken for the top and bottom guide rails rollers, fittings etc.
    (9) Coefficients for sliding doors shall be the same as for normal types of doors in the table.
    Measurements shall be taken outside to outside of shutters, and no separate measurements
    shall be taken for the painting guide rails, rollers, fittings etc.
    (10) Measurements of painting as above shall be deemed to include painting all iron fittings in the
    same or different shade for which no extra will be paid.
    (11)The measurements of guard bars, expanded metal, hard drawn steel wire fabric of approved
    quality, grill work and gratings, when fixed in frame work, painting of which is once measured
    else where shall be taken exclusive of the frames. In other cases the measurements shall be
    taken inclusive of the frames.
    (12) For painting open palisade fencing and gates etc., the height shall be measured from the bottom
    of the lowest rail, if the palisades do not go below it, (or from the lower end of the palisades, if
    they project below the lowest rail), upto the top of rails or palisades whichever are higher, but not
    up to the top of standards when the latter are higher than the top rails or the palisades.

    13.23.6.5 Width of moulded work of all other kinds, as in hand rails, cornices, architraves shall be mea-
    sured by girth.

    13.23.6.6 For trusses, compound girders, stanchions, lattice girders, and similar work, actual areas will
    be measured in sq. metre and no extra shall be paid for painting on bolt heads, nuts, washers etc. even
    when they are picked out in a different tint to the adjacent work.

    13.23.6.7 Painting of rain water, soil, waste, vent and water pipes etc. shall be measured in running
    metres of the particular diameter of the pipe concerned. Painting of specials such as bends, heads,
    branches, junctions, shoes, etc. shall be included in the length and no separate measurements shall be
    taken for these or for painting brackets, clamps etc.

    13.23.6.8 Measurements of wall surfaces and wood and other work not referred to already shall be
    recorded as per actual.

    13.23.6.9 Flag staffs, steel chimneys, aerial masts, spires and other such objects requiring special
    scaffolding shall be measured separately.

    13.23.7 Precautions
    All furnitures, fixtures, glazing, floors etc. shall be protected by covering and stains, smears, splashings, if
    any shall be removed and any damages done shall be made good by the contractor at his cost.

    561 SUB HEAD 13.0 : FINISHING

    You might also like