Magnesium Extruded es Magnesium Extruded es

At the requests of clients, may produce thickness or diameter of At the requests of clients, may produce thickness or diameter of

Motor heat radiation parts

ø 1.6- ø 3.5 magnesium welding rods

Oxidized magnesium alloy tube

ø 6- ø 12 magnesium welding rods

Magnesium shrinkage tube

 Magnesium Casting Anodes Magnesium Casting Anodes

Magnesium casting anodes technical requests

Chemical Composition Standard:ASTM B 843-1995、 SY／T10019-1997 、GB/ T17731—2004 7731—2004
Main application: magnesium anode suitable applies in the of anticorrosion. Such as: oil,
Alloying element Inclusion(max)
gas, water transmission in underground or fresh water, underground cable, chemical, communication, bay,
Type Other
Al Zn Mn Mg Fe Cu Nl Si watercraft and reservoir strobe.
Each Total
MGAZ63B 5.3-6.7 2.5-3.5 0.15-0.60 Balance 0.003 0.01 0.001 0.08 - 0.30
MGAZ31B 2.7-3.5 0.6-1.4 0.2-1.0 Balance 0.003 0.01 0.001 0.08 0.05 0.30
MGM1C <0.01 - ０.5-1.3 Balance 0.01 0.01 0.001 0.05 0.05 0.30

Electrochemical Performance
Open-circuit Generating current amount
Type
-V (Cu/CuSO )
4 % (Cu/CuSO )
4 (A.h)/kg (Cu/CuSO 4)

MGAZ63B 1.57-1.67 ≥55 ≥1210

MGAZ31B 1.57-1.67 ≥55 ≥1210
MGM1C 1.77-1.82 ≥50 ≥1100

Anode Dimensions
Type Diameter (mm) Weight (Kg) High Potential L (mm) AZ63 anode L (mm)
C Type
C25 75 2.56 336 325
C36 114 3.7 202 193 Standard square type anode for oil
、D
American standard S、D
D type
typeanode
anode
C41 114 4.2 230 220
C77 110 7.8 431 412
C100 110 10.2 560 536
C145 146 14.7 494 472
C227 178 22.9 520 497
C274 114 28.2 1528 1462

Type Weight (Kg)

D Type A (mm) B (mm) C (mm)
9D2 4.082 69.9 76.2 549.3
14D2 6.350 69.9 76.2 850.9
20D2 9.072 69.9 76.2 1212.9
9D3 4.082 88.9 95.3 352.4
17D3 7.711 88.9 95.3 641.4
32D5 14.515 139.7 146.1 504.8
48D5 21.772 139.7 146.1 765.2
1.5Kg 1.5 80.0 70.0 190.0
2.5Kg 2.5 80.0 70.0 300.0

Type Weight (Kg)

A (mm) B (mm) C (mm)
S Type
3S3 1.4 76.2 76.2 114.3
American standard C type anode
5S3 2.5 76.2 76.2 190.5
9S2 4.1 50.8 50.8 685.8
9S3 4.1 76.2 76.2 342.9
17S2 7.7 50.8 50.8 1295.4
Standard type squar
square
e anode
anode
anodefor
for
for
oiloil
oil
17S3 7.7 76.2 76.2 647.7
20S2 9.1 50.8 50.8 1524.0
32S3 14.5 76.2 76.2 1143.0
32S5 14.5 127.0 127.0 533.4
40S3 18.1 76.2 76.2 1524.0
48S5 21.8 127.0 127.0 787.4
60S4 27.2 101.6 127.0 1524.0
NO. Weight (Kg) Size(lengh×width×height)
1 4±0.2 350×(75+85)×80
2 8±0.2 700×(75+85)×80
3 11±0.3 700×(90+100)×90
4 14±0.3 700×(100+110)×105
5 22±0.5 700×(130+150)×125
Bar-type anode for water heater Bracelet type anode ring
 Magnesium Extruded Anodes Ribbon Anode

Standard:ASTM B 843-1995
843-1995 GBGB / T17731-2004 Standard:AST M B 843-1995
843-1995 SY / T0019-1997
Main application: water heater, water container, pre-polarization of steel structure in seawater, gas pipe, anticorrosion of Main Applications:Ribbon anodes are used for the cathodic protections of sleeved pipings, tanks and pipe networks and
grounding grids guarding against heavy current interference, and temporayt cathodic protection of pipings.
steel and iron structure where high resistant and electrolyte (soil and water) existed

Anode for water air conditioner

Magnesium ribbon
Flexible zinc ribbon

High effect anodes with additional resistance With screw thread bar anode (NPT-ASTM)
Chenical Cimposition
型号Type Al Zn Mn Fe Ni Cu Si Mg
Mg- <0.010 <0.010 <0.030 <0.002 <0.001 <0.001 <0.010 >99.95
Mg- <0.010 - 0.50-1.30 <0.03 <0.001 <0.02 - 余量Bal.

Chemical Composition
Product Specifications
Alloy elements Impurity elements (max) Section (A×B) (mm) 9.5×19

Designation Other Steel core diameter (mm) 3.2

Al Zn Mn Mg Fe Cu Nl Si
Each Total 重量 kg/m Weight 0.37

MGAZ63B 5.3-6.7 2.5-3.5 0.15-0.60 Balance 0.003 0.01 0.001 0.08 - 0.30 Seawater 2.4A/m

Current Output Soil(5000Ω.cm) 10mA/m

MGAZ31B 2.7-3.5 0.6-1.4 0.2-1.0 Balance 0.003 0.01 0.001 0.08 0.05 0.30
Frech Water(15000Ω.cm) 3mA/m
MGM1C <0.01 - ０.5-1.3 Balance 0.01 0.01 0.001 0.05 0.05 0.30

Electrochemistry Performance
Specification of extuded anode bar Open-circuit Close ciruit potential Generated energy Electricity efficiency
Type
(-V，Cu/CuSo 4 ) (-V，Cu/CuSo 4 ) (Ah/g) （%）

Anode Dia (mm) Core Dia (mm) Thread Unit weight (g/cm) >1.05 >1.00 780 95
>1.10 >1.05 780 90
13.97 2.0 NPT-ASTM/BSP/G/R 2.83
High purity zine >1.10 >1.05 740 90

19.05 3.4 NPT-ASTM/BSP/G/R 5.66

品 格 Product Specifications
21.34 3.4 NPT-ASTM/BSP/G/R 6.85
Dimension
Unit weight
Type
26.67 3.4 NPT-ASTM/BSP/G/R 10.42 (g/cm)
A (mm) B (mm) C (m)

33.40 3.4 NPT-ASTM/BSP/G/R 16.08 Extra Large (A) 25.4 31.75 30.5 35.72

39.65 4.8 NPT-ASTM/BSP/G/R 23.07 Large (B) 15.88 22.23 61 17.82

51.40 4.8 NPT-ASTM/BSP/G/R 37.96 Standard (C) 12.7 14.29 152.5/305/1098 8.93

Samll (D) 8.73 11.91 305 3.72

 Aluminum Anode Zinc Anodes

Standard:GB/ T 4948-2002
Main application: Aluminum anodes are suitable for the cathidic protection for such metal structures as ships, machinaty,
offshore engineering, harbor facilities, and pipings and cables in an ooze corrosion envionment.

Chenical Cimposition
Impurities Less than
Element Al Cd
Fe Cu Pb Si Zn
Comtent % 0.3-0.6 0.05-0.12 0.005 0.005 0.006 0.125 Balance

Electrochemical Performanc
Open-circuit Working potential Theoretical Current Capacity Practical Capacity Current efficiency
Item
V (SCE) V (SCE) A·h/kg A·h/kg %
Performance -1.05∼-1.09 -1.00 ∼-1.05 820 >780 >95

Chenical Cimposition
Type of Alloy Zn In Cd Sn Mg Si Fe Cu Al
Standard:GB/ T 4950-2002
Al-Zn-In-Cd 2.5-4.5 0.018-0.050 0.005-0.020 - - ≤0.10 ≤0.15 ≤0.15 Balance Main application: Zinc anodes are suitable for the cathadic protetion for ships machinary, offshore engineering and harbor
Al-Zn-In-Sn 2.2-5.2 0.020-0.045 - 0.018-0.035 - ≤0.10 ≤0.15 ≤0.15 Balance facilities in seawater and fresh seawater and for pipes and cables embeded in soil with Cower resistivity.
Al-Zn-In-Si 5.5-7.0 0.025-0.035 - - - 0.10-0.15 ≤0.15 ≤0.15 Balance
Al-Zn-In-Sn-Mg 2.5-4.0 0.020-0.05 - 0.025-0.075 0.50-1.00 ≤0.10 ≤0.15 ≤0.15 Balance

Electrochemical Performanc
Open-circuit Working potential Practical Current Capacity Current efficiency
Item
V (SCE) V (SCE) A.h/kg \%

Performance -1.18∼-1.10 -1.12 ∼-1.05 ≥2400 ≥85

 High Silicon Cast Iron Anode Complete Sets Of Anticorrosion Products

Standard:SYJ36-89
Main Applications:It is widely applied to the impressed current cathodic protection of oil drilling platform at sea.buried
pipings and cables under ground.

Testing patch with cable

Long effective electrode Cu/ CuSO4

Zinc grounding batteries

Chenical Cimposition
Type Si Cr Mn C Fe P S
Magnesium grounding batteries
High silicon cast iron 14-16 - 0.6-0.8 0.8-0.15 Balance ≤0.25 ≤0.1

Cr-containing silicon iron 14-16 4.0-4.5 0.6-0.8 0.8-0.15 Balance ≤0.25 ≤0.1

Electrochemical performance
Working current density Consumption
Material Environment
(A/m 2） (kg/A·a）

Seawater 50 0.3-1.0
High silicon cast iron
Fresh water, soil 10 0.05-0.2

Specifiection
Cable atteched to anode
Type Size (mm) Weight (Kg)
Section (mm 2 ) Length (mm)

YGT- Φ50×1500 22 25 1000

YGT- Φ75×1200 40 25 1000

YGT- Φ75×1500 50 25 1000 High potential anode filled with fillings

Testing peg
YGT- Φ100×1500 90 25 1000
 Other Products

Lead and antimony alloy tube Magnesium welded frame parts Aluminum alloys casting

Magnesium alloy castings