PROFESSIONAL ENGINEER - Summary Statement

Paragraph in the career

Competency Element A brief summary of how you have applied the element episode(s) where the element
is addressed
PE1 KNOWLEDGE BASE
1. Through my 5 years study in Alexandria university
faculty of engineering I covered all mechanical CE 1.1 , CE 1.2.1, CE 1.1.2 ,
engineering fundamentals by studying CE 1.2.3, CE 1.2.2, CE 2.1
(thermodynamics, fluid mechanics, internal
combustion engines, gas dynamics, and mechanical
design….etc).
PE1.1 Knowledge of science and
2. In my graduation project I worked under an expert
engineering fundamentals
supervision that would have failed me if I did not
had the required knowledge back then.
3. I am capable of learning new programs and tools
that can aid me in my work.
4. I was always eager to learn so I took a lot of courses
in collage and training during the summer time.
1- As a mechanical engineer, I studied the most CE 1.1, CE 1.2.1, CE 2.1,
important and related subjects to my field which CE 2.2, CE 3.1, CE 3.2,
enabled me to be a professional in my field. CE 3.2.2
2- A great deal of practical training during the summer
time in the university years at many factories built
me a strong over view to work environment.
3- I specialized in pipeline design as I also did my
PE1.2 In-depth technical graduation project in the same field.
competence in at least one 4- I worked for NATGAS The National Gas Company
engineering discipline for 5 years designing and executing gas pipelines for
a wide range of domestic, commercial and industrial
customers.
5- I try to keep myself always up to date to the new
techniques and recently used equipments in my
field.
6- I always know the regulations and specifications I
am supposed to work with.
CE 1.1, CE1.1.2, CE 1.2.1,
1- Studied project management course during the CE 1.2.2, CE 2.1.2, CE 2.2,
university years thought me how to use the available CE 2.2.1, CE 2.2.2, CE 2.2.4
resources and tool. And get the best use of them.
2- I always was the planner in my graduation project.
PE1.3 Techniques and resources
3- I have worked as a project engineer where I handled
resources and man power to achieve the tasks
assigned to me.
4- Took a PMP course (project management
professional) during my work in NATGAS.
CE 1.1.2, CE 1.2.1,
1- From working with professional Engineers in the CE1 Summary
field I learned a lot from their experience without
studying.
2- I always try to read a lot.
PE1.4 General Knowledge
PE2 ENGINEERING ABILITY
1- By analyzing the problems and trying to solve them CE 1.1.2, CE 1.2.2, CE 1.2.3,
using engineering background I have. CE 1.2.4, CE 1.2.5
2- When I face a difficult and complicated problem, I
PE2.1 Ability to undertake try to search about how to solve it or asking people
problem identification, of experience.
formulation, and solution 3- I can learn any tool that can help me find a solution
to a problem I am encountering.
4- I can always find my way out of a problem when it
comes to using a programming tool.
PE2.2 Understanding of social, 1- I always analyze the environment I am working at. CE 1.1.1, CE 2.1.1, CE 2.2.5,
cultural, global, and 2- I always get the approval of authorities if it is CE 3.1, CE 3.1.1, CE 3.2.2,
environmental responsibilities and required or even recommended. CE 2.2.4, CE2 Summary
the need to employ principles of 3- I have worked in different environments and dealt
sustainable development with wide range of people with different
background and social circumstances.
4- I never exceeded the budget assigned to a project I
am leading, I always monitor the expenses.
1- I have learnt to use Ms-Project to use it for planning CE 1.2.2, CE 1.2.3, CE 1.2.4,
my tasks easily. CE 1.2.5, CE 3.2, CE 3.2.4,
2- I have learnt to use the GIS to use it for obtaining a CE 3.2.4
pipeline route in my graduation project.
PE2.3 Ability to utilise a systems 3- Using visual basic I designed a module to calculate
approach to complex problems the friction factor using Darcy Equation as a small
and to design and operational part of the main program.
performance 4- I used visual basic to make a program that can make
the calculations of design for designing a network
for a high-rise building to overcome the difficulties
of calculations using SynerGee program and
compared its results with the SynerGee.
1- Successfully obtained pipeline route using GIS. CE 1.2.4, CE 1.2.5, CE 2.2.3,
2- Successfully completed the hydraulic design for a CE 2.2.4,CE 3.2.4
crude pipeline as a graduation project using Visual
Basic for calculations.
3- Successfully designed a natural gas network to
PE2.4 Proficiency in engineering
supply a factory with natural gas using SynerGee
design
program.
4- Prepared an M.T.O (material take off) for a gas
network project.
5- Successfully designed a natural gas network to a
high-rise building.
1- Played a key role in my graduation project. CE 1.1.2, CE 1.2, CE 2.1.2,
2- Successfully conducted a project of supplying a CE 2.2, CE 2.2.1, CE 2.2.2,
PE2.5 Ability to conduct an factory with natural gas. CE 2.2.3, CE 2.2.4, CE 2.2.5,
engineering project 3- Worked in Alexandria Phase 2 project. CE 2.2.6, CE 2.2.7, CE 2.2.8,
4- Took a PMP course (project management CE 2 Summary
professional) during my work in NATGAS.
1- I always try to analyze and understand the work CE 1.1.1, CE 1.1.2, CE 2.1.1,
environment. CE 2.1.2, CE 2.2.1, CE 2.1,
2- I always know my place in the business work CE 2.2.6, CE 2.2.7, CE 3.1.1,
structure and the levels of authorities given to me. CE 3.1.2, CE 3.2.1, CE 3.2.3
PE2.6 Understanding of the
3- When I use authority delegation I always remain
business environment
supervising.
4- I define the area I am working at.
5- I always keep in mind the limits of the concession
area of my company.
PE3 PROFESSIONAL
ATTRIBUTES
1- I am familiar with engineering meetings since my CE 1.2, CE 2.1, CE 2.2.6,
graduation project. CE 3.1, CE 3.2.3, CE 2.2.5
2- Interacting with people with different cultures and
backgrounds such as (Factory managers, Engineers,
Technicians, excavation works, deferent types of
PE3.1 Ability to communicate
customers).
effectively, with the engineering
3- Worked in Alexandria phase2 project where I
team and with the community at
experienced dealing with a wide range of foreigners.
large
4- I can appoint work meetings and achieve my goals
in these meeting.
5- I dealt with many other utilities companies and built
some good relations with their engineers and
working teams.
1- At my graduation project I did a research about CE 1.2.1, CE 2.2.8, CE 2.2.1,
heavy crude oil pipeline design. CE 2.2.3
PE3.2 Ability to manage 2- I can handle the documentation and information
information and documentation wisely like I did in El Salam Macaroni factory
project.
3- I always start where others have ended.
CE 1.2.3, CE 1.2.4, CE 3.2,
PE3.3 Capacity for creativity and I always try to bind the tools that I can use to find solutions CE 3.2.4
innovation to any problem I encounter in my work.

PE3.4 Understanding of I always keep in mind the engineering code of ethics CE 2.2.5, CE 3.2.3
professional and ethical and I never commit any unethical act.
responsibilities, and commitment
to them
PE3.5 Ability to function 1- I worked as a part of a team work in my graduation CE 1.1,CE 1.1.2, CE 1.2,
effectively as an individual and in project and was capable of executing the tasks CE 2.1, CE 2.1.2, CE 2.2,
multidisciplinary and assigned to me as single or the tasks that other team CE 3.2.4
multicultural teams, as a team members are involved in with me.
leader or manager as well as an 2- I worked as a team leader in El Salam Factory
effective team member project (stated in CE2).
3- I completed a natural gas network design process for
a high-rise building individually.
1- I am capable of searching effectively to get the CE 1.2.1, CE 1.2.2, CE 1.2.3,
information I am looking for. CE 3.2.3
PE3.6 Capacity for lifelong 2- I am always eager for learning.
learning and professional 3- I like to learn tools that can help me get the job
development done.
4- I always go back to my supervisors if I am unable to
get or understand any information.
Always kept my professional attitudes in all circumstances, CE 3.1, CE 3.2.3, CE 2.1, CE
PE3.7 Professional Attitudes including relations with managers, clients (even the most 2.2.5, CE 2 Summary
fussy ones), suppliers, contractors and colleagues as well.