G-code, M-code Programing CNC (1)

Dalam programing mesin CNC ( Computer Numerically Controlled ) kita mengenal G-

code, M-code, dan T-code. Berikut ini sedikit ulasan tentang G-code dan M-code pada
mesin cnc.

Kode G :menyatakan gerakan

Kode M :menyatakan fungsi mesin

G-CODE
jenis-jenis G-code di kelompokan menjadi 2 kelompok.

1.jenis basic/dasar meliputi:

-G00: gerakan cepat tanpa pemakanan benda kerja -->bergerak lurus

-G01: gerakan memotong/pemakanan benda kerja -->bergerak lurus
-G02: gerakan memotong melingkar searah jarum jam
-G03: gerakan memotong melingkar berlawanan arah jarum jam

2. jenis lanjut/siklus meliputi:

-gabungan langkah G00 dan G01 yang disedehanakan

-G90: sistem kordinat absolut
-G91: sistem kordinat incrimental

Berikut ini daftar G-code:

G00 - Rapid Positioning

G01 - Feedrate Positioning
G02 - Arc Clockwise
G03 - Arc Counterclockwise
G04 - Dwell
G05 - High Speed Machining
G07 - Imanaginary Axis Designation
G09 - Exact Stop Check
G10 - Program Parameter Input
G11 - Program Peramater Input Cancel
G12 - Circle Cutting CW
G13 - Circle Cutting CCW
G17 - X - Y Plane
G18 - X - Z Plane
G19 - Y - Z Plane
G20 - Input in Inch Units
G21 - Input in Metric
G22 - Stored Stroke Limit ON
G23 - stored Stroke Limit OFF
G27 - Reference Point Return Check
G28 - Automatic Return to Reference Point
G29 - Automatic Return from Reference Point
G30 - Return to 2nd, 3rd or 4th Reference Point
G31 - Skip Function
G33 - Thread Cutting
G34 - Bolt Hole Circle (Canned Cycle)
G35 - Line at Angle (Canned Cycle)
G36 - Arc (Canned Cycle)
G40 - Cutter Compensation Cancel
G41 - Cutter Compensation Left
G42 - Cutter Compensation Right
G43 - Tool Length Compensation (Plus)
G44 - Tool Length Compensation (Minus)
G45 - Tool Offset Increase
G46 - Tool Offset Decrease
G49 - Tool Length Compensation Cancel
G50 - Scaling OFF
G51 - Scaling ON
G52 - Local Coordinate Setting
G53 - Machine Coordinate Setting
G54 - Workpiece Coordinate Setting #1
G55 - Workpiece Coordinate Setting #2
G56 - Workpiece Coordinate Setting #3
G57 - Workpiece Coordinate Setting #4
G58 - Workpiece Coordinate Setting #5
G59 - Workpiece Coordinate Setting #6
G60 - Single Direction Positioning
G62 - Automatic Corner Override
G63 - Tapping Mode
G64 - Cutting Mode
G65 - Custom Macro Call (Simple)
G66 - Custom Macro Call (Modal)
G67 - Custom Macro Call Cancel (Modal)
G68 - Coordinate System Rotation ON
G69 - Coordinate System Rotation OFF
G70 - Input in Inch Units
G71 - Input in Metric Units
G73 - High Speed Peck Drilling Cycle
G74 - Left Hand Tapping Cycle
G76 - Fine Boring Cycle
G80 - Canned Cycle Cancel
G81 - Drilling Cycle (Canned)
G82 - Counter Boring Cycle (Canned)
G83 - Peck Drilling Cycle (Canned)
G84 - Right Hand Tapping Cycle (Canned)
G85 - Boring Cycle (Canned)
G87 - Back Boring Cycle (Canned)
G90 - Absolute Positioning
G91 - Incremental Positioning
G92 - Reposition Origin Point
G94 - Feed Per Minute
G95 - Feed Per Revolution
G96 - Constant Surface Speed Contrpl
G97 - Constant Surface Speed Control Cancel
G98 - Set Initial Plane (Default)
G99 - Return to Rapid Plane

sumber: http://www.4hiretek.com/gmcodes.html

M-CODE
Seperti halnya G-code, M-code juga memiliki 2 kelompok, dasar dan lanjutan:

M-code Dasar meliputi:

M02 - menghidupkan poros mesin (spindel on) berputar searah jarum jam (CW).
M03 - menghidupkan poros mesin (spindel on) berputar berlawanan arah jarum jam
(CCW).
M05 - mematikan poros mesin (spindel off)
M30 - langkah terakhir (program end)

M-code Lanjutan meliputi:

M08 : Menghidupkan pendingin/coolant
M09 : Mematikan pendingin/coolant
Dll.

Berikut ini daftar M-code:

Untuk cnc Mill:

M00 - Program Stop

M01 - Optional Stop
M02 - Program End
M03 - Spindle Clockwise
M04 - Spindle Counter Clockwise
M05 - Spindle Stop
M06 - Tool Change
M07 - Thru Spindle Coolant ON
M08 - Flood Coolant ON
M09 - Coolant Off (all coolant)
M10 - Table Pallet Clamp
M11 - Table Pallet Unclamp
M12 - Shower Coolant On
M14 - Spindle Air Blow On
M15 - Spindle Air Blow Off
M16 - Air Blast / Tool Changer
M18 - Air Blast Off
M19 - Spindle Orientation
M29 - Rigid Tapping
M30 - End Program
M60 - Pallet Change
M61 - Load Pallet #1
M62 - Load Pallet #2
M98 - Sub Program Call
M99 - Sub Program Cancel

Untuk cnc Lathe/bubut:

M00 - Program Stop

M01 - Optional Program Stop
M02 - Program End
M03 - Spindle Clockwise
M04 - Spindle Counter Clockwise
M05 - Spindle Stop
M07 - Flood Coolant #1 On
M08 - Flood Coolant #2 On
M09 - Coolant Off
M30 - End Progarm
M98 - Sub Program Call
M99 - Sub Program Cancel