Scribd
Upload
58 views4 pages

Control Valve Part

Uploaded by

sushant_jhawer

control valve section

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Control Valve Part

Uploaded by

sushant_jhawer
58 views4 pages
control valve section

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

control valve section

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
58 views4 pages

Control Valve Part

Uploaded by

sushant_jhawer
control valve section

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4

Model 9100 Series 9000 Control Valves Technical

RESEARCH® Control Valves


Brief

Model 9100

• 6 Sizes: 1/2" to 2" • Liquid • Gas • Steam


• High Performance • Chemical • Petroleum
• Rugged Design • Textiles • Pulp/Paper
• 316L SST Trim • Pharmaceutical • HVAC
• B62 Bronze Body/Bonnet • Automotive • Tires
• Field Reversible Actuator • Plastics • Rubber
• Std Live Loaded TFE Packing

BadgerMeter,Inc. 941378
5-01
®
VALVE SPECIFICATIONS
BODY ASSEMBLY DESCRIPTION ACTUATOR ASSEMBLY DESCRIPTION
Type: 2-Way High Capacity Globe, Modulating Pneumatic Multi-Spring and Diaphragm Actuator
Size: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" Effective Area: 35 in2 [225 sq.cm]
Pressure Rating: ANSI CL 150 [300 psi @ 100F] Stroke: 3/4" or 1”
Body Material: Bronze ASTM B62 Spring [bench] Loading: Adjustable [some ranges]
Bonnet Material: Bronze ASTM B62 Action: ATO or ATC [reversible without additional parts]
Accessory Mounting: IEC534 [Namur]
Rec. max. oper. press.: 60 psig @ 70°F [4 Bar @ 21°C]
Due to the elemental content of B62 bronze, it is NOT Max. Diaphragm Pressure: 90 psig@70°F [6 Bar @ 21°C]
recommended for potable water. Upper Ambient Temperature Limit: 160°F [71°C] @ 30psig
Body Gasket Material: Copper Lower Ambient Temperature Limit: -20°F [-29°C] @ 30psig
Innervalve Assembly: 316L SST Signal Range: Standard [3-15 psig] Others Available
Seat Ring: 316L SST Pressure cases and yoke: Steel/Epoxy coated
Packing: PTFE “V” Rings-Live Loaded Diaphragm Material: Nitrile/Polyester
Packing: Optional: Grafoil® Spring Material: 17-7Ph SST
Packing Spring: 302 SST Stem Seal: ELF Buna “O” Ring
Packing Follower: PTFE-PFA Stem Guide Bushings: Filled Composite Bearing Material
Packing Follower: Optional Bronze [Grafoil®] Hardware Material: 300 SST
Other Hardware: 300 SST Travel Indication: Adjustable, Nylon Safety Pointer
DESIGN CRITERIA
OPTIONS
• Meets MSS SP-80 and ANSI B16.24
• Linear Characteristic or Quick Open On-Off
• Heavy Duty Hi-Capacity body
• Standard Characteristic: Equal Percent • Double Packing, REK® fugitive emission packing
• Standard Replaceable Seat/Innervalve • Alarm/Purge port with double packing
• Standard ANSI Class IV Shut-Off • SST bonnet extensions for cryogenic service
• Standard Live-Loaded TFE Packing • Positioners, Limit switches, Airset, etc.
• Heavy Duty Post Guided Innervalve • Carbon steel “Lap-Joint Flange Kit,” for conversion to
• Stem welded into innervalve guide CL150 Flanges [meets ASME/ANSI face-to-face length]
• Precision CNC cut NPT body threads

Page 2
Page 3
GRAFOIL® is a registered trademark of Graftech Inc.
RESEARCH® is a registered trademark of Badger Meter, Inc.

Due to continuous research, product improvements and enhancements,


Badger Meter reserves the right to change product or system specifications
without notice, except to the extent an outstanding bid obligation exists.
Please see our website at
www.badgermeter.com
for specific regions and contacts. BadgerMeter,Inc.
6116 E. 15th Street, Tulsa, Oklahoma 74112
(918) 836-8411 / Fax: (918) 832-9962
Copyright © Badger Meter, Inc. 2001. All rights reserved, all data subject to change without notice. ® www.badgermeter.com

You might also like