Scribd
Upload
257 views12 pages

Cisco Rv325 Openvpn Initial Config

The document provides instructions for initial setup of a Cisco RV325 router with OpenVPN. It includes steps such as: 1. Updating the router firmware to the latest version and resetting to factory defaults including certificates. 2. Creating a new server certificate and client certificates for OpenVPN. 3. Configuring the WAN interface with a static IP address. 4. Enabling OpenVPN and downloading the client configuration file and password file to connect remotely.

Uploaded by

nikolar85
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
257 views12 pages

Cisco Rv325 Openvpn Initial Config

The document provides instructions for initial setup of a Cisco RV325 router with OpenVPN. It includes steps such as: 1. Updating the router firmware to the latest version and resetting to factory defaults including certificates. 2. Creating a new server certificate and client certificates for OpenVPN. 3. Configuring the WAN interface with a static IP address. 4. Enabling OpenVPN and downloading the client configuration file and password file to connect remotely.

Uploaded by

nikolar85
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

Initial setup of Cisco RV325 with OpenVPN

Login using cisco and cisco

Change to a simple password as this will be removed soon, click “Save” then login using cisco and the new password.
Set time and date, click “Save”

This is the current Certificate, notice it is five years old.


Lets get the latest firmware, download and browse to it, the latest is 3.2.02 as of 12/16, click “Firmware Upgrade”

Click “Yes” The red diag light will flash on the router while this is uploading; the router will flash and reset then the diag
light will be red while it reboots, this will take about a minute, it will flash again and then the pwr light will be green.

Now we want to create a new Certificate, click “Factory Default including Certificates”
Click “Yes”

The router will flash and reset then the diag light will be red while it reboots, this will take about a minute, it will flash
again and then the pwr light will be green.

Now, create a strong password, there is no such thing as overkill, here; use a password manager to create a complex one
that cannot be broken easily.
Set time and date, click “Save”

When we check the new cert, we see it is current, Huzzah!

Now we set our static WAN IP address, select the interface and click “Edit”
Enter relevant info and click “Save”

Now we want to create an OpenVPN Server Certificate, so select that on the “Type:” dropdown, enter correct info and
click “Save”

Notice the “Valid Duration:” is set for 3700 days, this is longer than the main cert so when that is redone, this will be lost
so 10950 is unnecessary; same for Client, below.
Now we want to create an OpenVPN Client Certificate, so select that on the “Type:” dropdown, enter correct info and
click “Save”

Now you have a server cert and a client cert for OpenVPN, create additional client certs as needed.

NOTE: you may wish to complete the setup and test the first client before creating other users.

Select “Enable” and click “Save”


I change the “Encryption:” to AES-256 and click “Save”

Click “Yes” This is why we flash the firmware and reset with factory defaults before we generate users, etc. 😊
Now we create the user account, select the appropriate Client Certificate, enter a username and password, click “Save”

Download the .ovpn file, I click the OpenVPN icon on the left

I edit with Notepad++


To add my password file into the config, see line 11 above and below

I add the name of the text file with a space after pass.

Now save this file as something more easily understood than clientx_*******.ovpn, such as EdCisco.ovpn
Create and save the password file containing the username and password, name it exactly what appears on line 11
above

Move these two files to…

Now launch OpenVPN and connect to the new network and verify proper operation.

You might also like