STAAD.

Pro Report BM 01
To: From:

Copy to: Date: Ref:

18/03/2009 ca/ Document1
17:56:00

Job Information
Engineer Checked Approved
Name: ISAAC AMADI
Date: 18-Mar-09 18-Mar-09

Structure Type PLANE FRAME

Number of Nodes 8 Highest Node 8

Number of Elements 7 Highest Beam 7

Number of Basic Load Cases 1

Number of Combination Load Cases 0

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name
Primary 1 UDL

Nodes
X Y Z
Node
(m) (m) (m)
1 0.000 0.000 0.000
2 3.375 0.000 0.000
3 6.900 0.000 0.000
4 10.425 0.000 0.000
5 13.950 0.000 0.000
6 17.475 0.000 0.000
7 19.650 0.000 0.000
8 22.275 0.000 0.000

Beams
Length β
Beam Node A Node B Property
(m) (degrees)
1 1 2 3.375 1 0
2 2 3 3.525 1 0
3 3 4 3.525 1 0
4 4 5 3.525 1 0
5 5 6 3.525 1 0
6 6 7 2.175 1 0
7 7 8 2.625 1 0

1
Section Properties
Area Iyy Izz J
Prop Section Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 0.45x0.23 1.04E 3 45.6E 3 175E 3 124E 3 CONCRETE

Materials
E Density α
Mat Name ν
(kN/mm2) (kg/m3) (1/°K)
3 STEEL 205.000 0.300 7.83E 3 12E -6
4 ALUMINUM 68.948 0.330 2.71E 3 23E -6
5 CONCRETE 21.718 0.170 2.4E 3 10E -6

Supports
X Y Z rX rY rZ
Node
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
1 Fixed Fixed Fixed - - -
2 Fixed Fixed Fixed - - -
3 Fixed Fixed Fixed - - -
4 Fixed Fixed Fixed - - -
5 Fixed Fixed Fixed - - -
6 Fixed Fixed Fixed - - -
7 Fixed Fixed Fixed - - -
8 Fixed Fixed Fixed - - -

Beam Loads : 1 UDL

Da Ecc.
Beam Type Direction Fa Fb Db
(m) (m)
1 UNI kN/m GY -21.000 - - - -
2 UNI kN/m GY -29.000 - - - -
3 UNI kN/m GY -29.000 - - - -
4 UNI kN/m GY -29.000 - - - -
5 UNI kN/m GY -29.000 - - - -
6 UNI kN/m GY -7.000 - - - -
7 UNI kN/m GY -7.000 - - - -

Beam Maximum Moments

Distances to maxima are given from beam end A.
Node Length d Max My d Max Mz
Beam L/C
A (m) (m) (kNm) (m) (kNm)
1 1 3.375 1:UDL Max - 0.000 0.000 3.375 29.726
Max 0.000 0.000 1.406 -16.684
2 2 3.525 1:UDL Max - 0.000 0.000 3.525 30.284
Max 0.000 0.000 1.763 -15.038
3 3 3.525 1:UDL Max - 0.000 0.000 0.000 30.284
Max 0.000 0.000 1.763 -15.263
4 4 3.525 1:UDL Max - 0.000 0.000 3.525 32.888
Max 0.000 0.000 1.762 -13.961
5 5 3.525 1:UDL Max - 0.000 0.000 0.000 32.888
Max 0.000 0.000 1.763 -19.124
6 6 2.175 1:UDL Max - 0.000 0.000 0.000 18.951
Max 0.000 0.000 7 7
2.625 1:UDL Max -ve 0.000 0.000 0.000 1.105
Max +ve 0.000 0.000 1.313 -5.477

2
Beam Maximum Shear Forces
Distances to maxima are given from beam end A.
Node Length d Max Fz d Max Fy
Beam L/C
A (m) (m) (kN) (m) (kN)
1 1 3.375 1:UDL Max -ve 0.000 0.000 0.000 26.630
Max +ve 0.000 0.000 3.375 -44.245
2 2 3.525 1:UDL Max -ve 0.000 0.000 0.000 50.954
Max +ve 0.000 0.000 3.525 -51.271
3 3 3.525 1:UDL Max -ve 0.000 0.000 0.000 51.398
Max +ve 0.000 0.000 3.525 -50.827
4 4 3.525 1:UDL Max -ve 0.000 0.000 0.000 50.088
Max +ve 0.000 0.000 3.525 -52.137
5 5 3.525 1:UDL Max -ve 0.000 0.000 0.000 55.066
Max +ve 0.000 0.000 3.525 -47.159
6 6 2.175 1:UDL Max -ve 0.000 0.000 0.000 15.817
Max +ve 0.000 0.000 7 7
2.625 1:UDL Max -ve 0.000 0.000 0.000 9.609
Max +ve 0.000 0.000 2.625 -8.766

Beam Maximum Axial Forces

Distances to maxima are given from beam end A.
Length d Max Fx
Beam Node A L/C
(m) (m) (kN)
1 1 3.375 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
2 2 3.525 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
3 3 3.525 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
4 4 3.525 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
5 5 3.525 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
6 6 2.175 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
7 7 2.625 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000

Reaction Summary
Horizontal Vertical Horizontal Moment
FX FY FZ MX MY MZ
Node L/C
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max FX 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Min FX 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Max FY 5 1:UDL 0.000 107.203 0.000 0.000 0.000 0.000
Min FY 8 1:UDL 0.000 8.766 0.000 0.000 0.000 0.000
Max FZ 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Min FZ 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Max MX 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Min MX 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Max MY 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Min MY 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Max MZ 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000
Min MZ 1 1:UDL 0.000 26.630 0.000 0.000 0.000 0.000

3
 -29.000 kN/m -29.000 kN/m -29.000 kN/m -29.000 kN/m
-21.000 kN/m

-7.000 kN/m -7.000 kN/m

3.38 m 3.53 m 3.53 m 3.52 m 3.53 m 2.17 m 2.63 m

FIRST FLOOR BEAM 01 LOADING DIAGRAM

30.284 kNm 32.888 kNm

29.726 kNm 29.276 kNm
18.951 kNm

5.889 kNm
0 kNm 1.105 kNm 0 kNm
-5.477 kNm
-15.037 kNm -15.038 kNm -15.263 kNm -13.961 kNm
-19.124 kNm

FIRST FLOOR BEAM 01 BENDING MOMENT DIAGRAM

55.066 kN
50.954 kN 51.398 kN 50.088 kN

26.630 kN
15.817 kN
9.609 kN
0.592 kN
-8.766 kN

-44.245 kN -47.159 kN
-51.271 kN -50.827 kN -52.137 kN

Y
FIRST FLOOR BEAM 01 SHEAR FORCE DIAGRAM

4
 Sunday, March 22, 2009, 05:14 PM
1ST FLOOR BEAMS -- PAGE NO. 4

====================================================================

B E A M N O. 1 D E S I G N R E S U L T S - FLEXURE

LEN - 3375. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 31. 3- 12 MM 0. 3164. YES NO

2 412. 3- 12 MM 2180. 3375. NO YES

B E A M N O. 1 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 562 mm | 26.6 kN | 1 | 8 mm | 4 | 187 mm |
| 2250 END 2 | 44.2 kN | 1 | 8 mm | 6 | 225 mm |
|----------------------------------------------------------------|

====================================================================

B E A M N O. 2 D E S I G N R E S U L T S - FLEXURE

LEN - 3525. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 31. 3- 12 MM 249. 3276. NO NO

2 412. 3- 12 MM 0. 1220. YES NO
3 412. 3- 12 MM 2305. 3525. NO YES

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 01.anl Page 4 of 8

 Sunday, March 22, 2009, 05:14 PM
1ST FLOOR BEAMS -- PAGE NO. 5

B E A M N O. 2 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 1174 mm | 51.0 kN | 1 | 8 mm | 6 | 234 mm |
| 2349 END 2 | 51.3 kN | 1 | 8 mm | 6 | 234 mm |
|----------------------------------------------------------------|

====================================================================

B E A M N O. 3 D E S I G N R E S U L T S - FLEXURE

LEN - 3525. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 31. 3- 12 MM 249. 3276. NO NO

2 412. 3- 12 MM 0. 1220. YES NO
3 412. 3- 12 MM 2305. 3525. NO YES

B E A M N O. 3 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 1175 mm | 51.4 kN | 1 | 8 mm | 6 | 235 mm |
| 2350 END 2 | 50.8 kN | 1 | 8 mm | 6 | 235 mm |
|----------------------------------------------------------------|

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 01.anl Page 5 of 8

 Sunday, March 22, 2009, 05:14 PM
1ST FLOOR BEAMS -- PAGE NO. 6

====================================================================

B E A M N O. 4 D E S I G N R E S U L T S - FLEXURE

LEN - 3525. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 31. 3- 12 MM 249. 3276. NO NO

2 412. 3- 12 MM 0. 1220. YES NO
3 412. 3- 12 MM 2305. 3525. NO YES

B E A M N O. 4 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 1174 mm | 50.1 kN | 1 | 8 mm | 6 | 234 mm |
| 2349 END 2 | 52.1 kN | 1 | 8 mm | 6 | 234 mm |
|----------------------------------------------------------------|

====================================================================

B E A M N O. 5 D E S I G N R E S U L T S - FLEXURE

LEN - 3525. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 31. 3- 12 MM 249. 3525. NO YES

2 412. 3- 12 MM 0. 1220. YES NO
3 412. 3- 12 MM 2599. 3525. NO YES

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 01.anl Page 6 of 8

 Sunday, March 22, 2009, 05:14 PM
1ST FLOOR BEAMS -- PAGE NO. 7

-------------------------------------------------------------------
Deflection Check As Per Clause 3.4.6
------------------------------------
Support Condition: Continuous Basic Span/Eff. Depth Ratio = 26
Modification Factor For Tension Reinforcement = 2.00
Modification Factor For Compression Reinforcement = 1.00
Modified Basic Span/Effective Depth Ratio = 52.00
Member Span = 3525 mm. Effective Depth = 419 mm.
Actual Span/Effective Depth Ratio = 8.41
******* Deflection Check Satisfactory. *******
-------------------------------------------------------------------

B E A M N O. 5 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 1175 mm | 55.1 kN | 1 | 8 mm | 6 | 235 mm |
| 2643 END 2 | 47.2 kN | 1 | 8 mm | 5 | 220 mm |
|----------------------------------------------------------------|

====================================================================

B E A M N O. 6 D E S I G N R E S U L T S - FLEXURE

LEN - 2175. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 412. 3- 12 MM 0. 2175. YES YES

B E A M N O. 6 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 543 mm | 15.8 kN | 1 | 8 mm | 4 | 181 mm |
| 1631 END 2 | 0.6 kN | 1 | 8 mm | 4 | 181 mm |
|----------------------------------------------------------------|
| Nominal links should be provided through out the length. |
|----------------------------------------------------------------|

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 01.anl Page 7 of 8

 Sunday, March 22, 2009, 05:14 PM
1ST FLOOR BEAMS -- PAGE NO. 8

====================================================================

B E A M N O. 7 D E S I G N R E S U L T S - FLEXURE

LEN - 2625. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 31. 3- 12 MM 0. 2625. YES YES

2 412. 3- 12 MM 0. 633. YES NO

B E A M N O. 7 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 437 mm | 9.6 kN | 1 | 8 mm | 3 | 218 mm |
| 2187 END 2 | 8.8 kN | 1 | 8 mm | 3 | 218 mm |
|----------------------------------------------------------------|
| Nominal links should be provided through out the length. |
|----------------------------------------------------------------|

********************END OF BEAM DESIGN**************************

50. SERV 0 MEMB 6

51. END CONCRETE DESIGN
52. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAR 22,2009 TIME= 17:12: 5 ****

***********************************************************
* For questions on STAAD.Pro, *
* Please contact : Research Engineers Ltd. *
* E2/4,Block GP, Sector-V,Salt Lake, KOLKATA - 700 091 *
* India : TEL:(033)2357-3575 FAX:(033)2357-3467 *
* email : [email protected] *
* US : Ph-(714) 974-2500, Fax-(714) 921-0683 *
***********************************************************

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 01.anl Page 8 of 8