Scribd
Upload
54 views1 page

Spreadsheets To BS 8110: Post-Tensioned Analysis & Design To Bs 8110:1997 - General Data

calculation

Uploaded by

Wole Labiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views1 page

Spreadsheets To BS 8110: Post-Tensioned Analysis & Design To Bs 8110:1997 - General Data

calculation

Uploaded by

Wole Labiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Spreadsheets to BS 8110 REINFORCED CONCRETE COUNCIL

Client Advisory Group Made by Date Page


Location Level 2 - Beam on Grid 7 RMW 29-Sep-2018 66
POST-TENSIONED ANALYSIS & DESIGN to BS 8110:1997 Checked Revision Job No
Originated from RCC42.xls on CD © 1999 RCC chg - R68

POST-TENSIONED ANALYSIS & DESIGN to BS 8110:1997 - GENERAL DATA

LOAD COMBINATIONS NOTES


SLS 1 Initial prestress + OW + construction load on all spans INPUT IS UNDERLINED.
INITIAL SLS 2 Initial prestress + OW + construction load on odd spans FRAMES ARE
SLS 3 Initial prestress + OW + construction load on even spans ASSUMED TO BE
SLS 4 Final prestress + dead + imposed load on all spans C
FINAL SLS 5 Final prestress + dead + imposed load on odd spans
SLS 6 Final prestress + dead + imposed load on even spans
ULS 1 Final prestress + factored dead and imposed load on all spans
ULTIMATE ULS 2 Final prestress + factored dead + factored imposed load on odd spans
ULS 3 Final prestress + factored dead + factored imposed load on even spans
DEFLECTION SLS 7 Final prestress + dead + 30% imposed load on odd spans

LOAD FACTORS min max VIBRATION


DEAD 1 1.4 Limiting reponse factor = 8
IMPOSED 0 1.6

OPTIONS Stressing Ends B (L, R, B) Prestress system U (U, B) Assume 20% max redistribution
Jacking F/strength 0.7 BS 8110 Class 3 (Clause 4.1.3) .
Slab or beam B (B or S) miting crack width 0.2 mm .
In slabs, nominal top bonded reinforcement in span? Y (Y or N; use Y for dissimilar spans)
Slab type S (S)olid, (R)ibbed or (W)affle, supported by beam Damping, ζ (2% to 8%) 5%

MATERIALSCONCRETE fcu = 40 Ec28 = 28 σc = 13.20 σt = 5.00 unmodified


At days 4.80 fci = 25.04 Eci = 21.72 σic = 10.02 σit = 3.20 unmodified
Cement content 330 W/C ratio 0.55 OPC or RHPC ? OPC .
Ave ambient during curing = 15ºC Longterm R/H % 50 γm = 1.50

STRAND fpu = 1860 Ap, mm² = 100 µ = 0.140 K = 0.0010


Ep = 195 Rel % = 2 Draw in= 6 Depth to strand centre = 40

REBAR fy = 460 COVERS Top Bottom Sides


γm = 1.05 to links 25 25 25

LOADING SEQUENCE Permanent loads for Ø assessmen 30% of Imposed is permanent


Load @ Age fcut Et Ø Ec
kN/m² days N/mm² kN/mm² Creep kN/mm²
Own weight 13.81 4.80 25.04 21.72 3.64 4.68
Applied dead 42.00 60 43.50 29.47 2.14 9.39
Quasi-Permanent Imposed 9.60 -=-
COMBINED 65.41 - - 26.76 2.45 7.75

NOTES on MATERIALS

BRITISH LOW RELAXATION STRAND


Type Dia Area Breaking Weight RELAXATION at 0.7fpu
Standard 15.2 139 1670 1.090 Ambient ºC 20 40 60 80 100
12.5 93 1770 0.730 Relaxation 1.8 3.5 5.1 7.5 10.7
Super 15.7 150 1770 1.180
12.9 100 1860 0.785
Compact 15.2 165 1820 1.295
12.7 112 1860 0.890

You might also like