Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    Two Way Slab Design

    Uploaded by

    Shakil Akhter
    This document summarizes the design of a two-way slab panel. The panel has dimensions of 6.23m by 5.23m and is an interior panel with a span ratio of 1.2. The required steel reinforcement is calculated to be 12mm bars at 100mm centers in both directions to resist the factored bending moments of 64.44kNm, 47.96kNm, 47.96kNm, and 35.97kNm in the four directions. The provided 300mm thick slab and 257mm of cover are deemed adequate to meet the design requirements for strength and serviceability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Two Way Slab Design

    Uploaded by

    Shakil Akhter
    83 views1 page
    This document summarizes the design of a two-way slab panel. The panel has dimensions of 6.23m by 5.23m and is an interior panel with a span ratio of 1.2. The required steel reinforcement is calculated to be 12mm bars at 100mm centers in both directions to resist the factored bending moments of 64.44kNm, 47.96kNm, 47.96kNm, and 35.97kNm in the four directions. The provided 300mm thick slab and 257mm of cover are deemed adequate to meet the design requirements for strength and serviceability.

    Original Description:

    Two Way Slab Design

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a two-way slab panel. The panel has dimensions of 6.23m by 5.23m and is an interior panel with a span ratio of 1.2. The required steel reinforcement is calculated to be 12mm bars at 100mm centers in both directions to resist the factored bending moments of 64.44kNm, 47.96kNm, 47.96kNm, and 35.97kNm in the four directions. The provided 300mm thick slab and 257mm of cover are deemed adequate to meet the design requirements for strength and serviceability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    83 views1 page

    Two Way Slab Design

    Uploaded by

    Shakil Akhter
    This document summarizes the design of a two-way slab panel. The panel has dimensions of 6.23m by 5.23m and is an interior panel with a span ratio of 1.2. The required steel reinforcement is calculated to be 12mm bars at 100mm centers in both directions to resist the factored bending moments of 64.44kNm, 47.96kNm, 47.96kNm, and 35.97kNm in the four directions. The provided 300mm thick slab and 257mm of cover are deemed adequate to meet the design requirements for strength and serviceability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TWO WAY SLAB DESIGN

    Panel S12

    Lg. Span (L y ) Sh. Span (L x )


    Panal size = 6.23 5.23
    2
    f ck = 35 N/mm
    2
    fy = 500 N/mm
    Clear cover = 25 mm
    EDGE COND. 1 INTERIOR PANEL
    L y /L x = 1.20
    Assume D = 300 mm
    2
    Dead load of the slab = D*25 = 7.500 kN/m
    Limits by IS 456-2000
    Floor finishes= 14.00 kN/m 2 Max dia of bar 37.5 mm
    Live load 15.00 kN/m 2 Max Spacing 300 mm
    2
    . Total load (w ) = 36.500 kN/m

     x (-ve) = 0.0430
     x (+ve ) = 0.0320
     y (-ve ) = 0.0320
     y (+ve) = 0.0240

    The Factored Moments are Moment At 8 tor 10 tor 12 tor


    in KNm in mm^2/m mm c/c mm c/c mm c/c
    Mx(-ve ) =  x (-ve) *w*l x 2 *1.5 = 64.44 568 88 138 199
    Mx(+ve) =  x (+ve) *w*l x 2 *1.5 = 47.96 419 120 187 270
    My(-ve) =  y (-ve) *w*l x 2 *1.5 = 47.96 440 114 179 257
    My(+ve) =  y (+ve) *w*l x 2 *1.5 = 35.97 360 140 218 314

    6
    d req = SQRT( (M u *10 )/(0.138*f ck *b)) = 115.51 mm
    D prov = 300 mm
    dx prov = 269 mm
    dy prov = 257 mm Ast in mm^2/m
    Provide 300 Ast for Mx (-ve) 12 tor @ 100 1131 SAFE
    mm thk Ast for Mx (+ve) 12 tor @ 100 1131 SAFE
    Ast for My (-ve) 12 tor @ 100 1131 SAFE
    Ast for My (+ve) 12 tor @ 100 1131 SAFE
    Check for Deflection :
    Percentage of Tension renforcement = 0.420

    Area of c/s of steel required


    f s =0.58*f y * = 108 N/mm 2
    Area of c/s of steel provided

    Basic span/eff depth ratio for continuous slabs = 26

    Modification factor = 2.00


    Coefficient for max ratio of span/eff depth = 52.0

    Effective Depth (d) required = 101 < 269 mm SAFE


    Overall Depth (D) required = 132 < 300 mm SAFE

    S12-0.00 (2) Page 1 of 2

    You might also like