Hyva Cylinders

Introduction

Introduction
Hyva is the world's Nr.1 producer of hydraulic tipping cylinders for the commercial vehicle industry. Hyva
designs and manufactures a complete range of telescopic tipping cylinders, both for front-end and underbody
applications. The Hyva cylinder is lightweight, uses less oil and therefore tips and lowers faster and is strong,
stable and maintenance free.

Hyva telescopic cylinders

Hyva front-end cylinder range
The standard Hyva cylinder range includes Front-End Cylinders with Outer Cover (FC), with Eye (FE) and
with Eye/Eye (FEE). Double acting cylinders are also available. Tipping capacity ranges up to 90 tons. In
addition to our standard features, Hyva offers options such as an incorporated damper; a double acting last
stage and several surface treatments. The piston of each FLASH front-end cylinder is hard chromed.

The standard FC-range consists of cylinders with a diameter of 77 to 214 mm and a stroke ranging from
2900 to 9530. The standard FE-range consists of cylinders with a diameter from 91 to 214 and a stroke
ranging from 3205 to 9030. Tippers with sloping headboard generally are fitted with an FE cylinder or FC with
a short cover.

Hyva under body cylinder range

Hyva also produces a complete range of under body cylinders. The heavy duty series are offered up to
diametre 223 mm with nine stages. The UMB-series starts at diametre 72 mm with two stages up to 191 mm
with 8 stages.

Modular design
Thanks to the modular design Hyva can offer a complete range of tipping cylinders assembled to order.
Our flexible manufacturing is your best guarantee for a minimum delivery time for the standard range of
cylinders. The use of top quality materials keeps wear at a minimum and maintenance simple. For service no
special tools are required.

Quality
All Hyva cylinders are fully tested before dispatch (pressure tests up to 1½ times working pressure). Our
customers all over the world acknowledge our reliability. The lSO 9001 standard held since 1991 is your
assurance of optimum quality, safety and professionalism.

After sales service

Whatever the age of your equipment and wherever it is working, Hyva's world-wide service network will
support you. In case of technical trouble you will be back on the road in no time.

PG-E 00000177 / 11-07-01 / RV AE 01-1

 Hyva Cylinders
Introduction

Code system tipping cylinders

FC191 - 5 - 07130 - 000A - K0343 - XX
other options
A = 190 bar
closed length B = 170 bar
working pressure C = 150 bar
code E3 concerning fitting to body D = 135 bar
code E2 concerning fitting to hydraulic system E = 110 bar
F = 090 bar
code E1 concerning fitting to base G = 180 bar
total stroke in mm (pull-out incorporated) H = 280 bar
number of extensions I = other pressures
effective diameter first stage
cylinder type description

Cylinder type description Code E1 concerning fitting to base

FC - front-end cylinder with outer cover 0 standard trunnion at standard position
FCT - front-end cylinder with outer cover and
bottom tank Code E2 concerning fitting to hydraulics
FE - front-end cylinder with piston eye 0 standard inlet at standard front position
FEE - front-end cylinder with piston eye and 1 standard inlet at non-standard front position
bottom eye 7 standard inlet at side
UMB / UME - under body cylinder for three way
tipping Code E3 concerning fitting to body
DA / DE - double acting cylinder 0 standard cover
KRM / KRA - under body cylinder for three way 1 standard spherical eye
tipping 2 fixed eye with bush
4 non standard cover
8 fixed eye without bush
9 special cover or piston

Front-end cylinder kits

To simplify the choice of the right adapters and mounting equipment Hyva offers tipping cylinder kits for
chassis and cradle mounted cylinders. We have kits with straight or 90° connections for high pressure hose
connections.

Code system cylinder kits

A L 8 7 580 ACD
options code A = including brackets C = adapter kit 90°
B = adapter kit straight D = including cradle
part code = the last 3 digits of the part number of the cylinder
example: cylinder 715 07 580 has a part code 580
stroke code = the second digit of the 5 digits stroke code of the cylinder
example: cylinder FC 191 - 5 - 07130 - 000A - K0343 has a stroke code 7
diameter code 0 = cylinder series < 110 6 = cylinder series 169-4
1 = cylinder series 110 7 = cylinder series 169-5
2 = cylinder series 129 8 = cylinder series 191
4 = cylinder series 149 9 = cylinder series 214
cylinder types L = FC - cylinders
Q = FE - cylinders
always A for cylinder kits

Kits for cylinders with the effective diameter of the first stage smaller or equal 149 mm are standard equipped
with adapters for ¾” high pressure hoses. Bigger cylinders have adapters for 1” high pressure hoses.

PG-E 00000177 / 11-07-01 / RV AE 01-2

 Hyva Cylinders
Front-end with outer cover

Carefully read mounting instructions before making a selection. Hyva tipping program also assist you making
the best and safest choice.
Always mind:
t Maximum fitting angle for closed cylinder (varies with cover lenght)
t Available free space on tipper
t Maximum angle for extended cylinder (29 degrees)

FC 077 front-end cylinder with outer cover

Part no. Kit no. Description Press Tipping Weight Vol. Inlet H* (mm) J (mm) K* (mm)
(bar) weight (tons) (kg.) (ltr.) BSP
714 90 220 Al02207 FC 077-3-02900-000A-K0203 170 7 - 10 61 9 ½” 1162 58 203
714 90 240 Al03220 FC 077-3-03200-000A-K0203 170 7 - 10 66 10 ½” 1262 58 203
* incl. 20 mm pull out (p.o.); tolerances -5 +30
H*

max. 29° (extended)

max. 29° (extended)
H*
K*
K*

J
J

* including pull out * including pull out

FC 091 & FC 093 front-end cylinders with outer cover

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 02 160 AL03160 FC 091-3-03205-000A-K0298 190 11 - 20 123 16 1”SAE 1464 81 298 160
715 02 180 AL03180 FC 091-3-03460-000A-K0298 190 11 - 18 129 17 1”SAE 1549 81 298 160
714 91 240 Al04220 FC 093-3-03245-001B-K0343 170 13 - 17 95 18 1”SAE 1307 81 343 190
714 91 260 Al04240 FC 093-3-03470-001B-K0343 170 13 - 16 99 19 1”SAE 1382 81 343 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

PG-E 00000177 / 11-07-01 / RV AE 01-3

 Hyva Cylinders
Front-end with outer cover

FC 110 front-end cylinders with outer cover

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (Kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 03 160 AL13160 FC 110-3-03205-000A-K0343 190 21 - 51 128 24 1”SAE 1399 86 343 190
715 03 180 AL13180 FC 110-3-03460-000A-K0343 190 21 - 44 135 26 1”SAE 1484 86 343 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

max. 29° (extended) max. 29° (extended)

H*

H*
K*

K*
L

L
J

* including pull out * including pull out

FC 129 front-end cylinders with outer cover

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 04 180 AL23180 FC 129-3-03460-000A-K0343 190 34 - 58 198 37 1”SAE 1484 91 343 190
715 04 220 AL23220 FC 129-3-03880-000A-K0343 190 33 - 54 215 42 1”SAE 1634 91 343 190
715 04 250 AL24250 FC 129-3-04270-000A-K0343 190 34 - 62 229 46 1”SAE 1764 91 343 190
715 04 262 AL24262 FC 129-4-04280-070A-K0343 190 22 - 54 202 40 1”SAE 1399 91 343 190
715 04 290 AL24290 FC 129-4-04620-000A-K0343 190 22 - 50 212 43 1”SAE 1474 91 343 190
715 04 392 AL25392 FC 129-4-05180-070A-K0343 190 22 - 41 231 48 1”SAE 1644 91 343 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

PG-E 00000177 / 11-07-01 / RV AE 01-4

 Hyva Cylinders
Front-end with outer cover

FC 149, 169 & 191 front-end cylinders with outer cover

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 05 220 AL43220 FC 149-3-03880-000A-K0343 190 48 - 71 250 56 1”SAE 1644 96 343 190
715 05 256 AL44256 FC 149-3-04270-000A-K0343 190 50 - 73 266 62 1”SAE 1774 96 343 190
715 05 262 AL44262 FC 149-4-04280-070A-K0343 190 36 - 73 236 55 1”SAE 1399 96 343 190
715 05 292 AL44292 FC 149-4-04620-070A-K0343 190 36 - 68 247 59 1”SAE 1474 96 343 190
715 05 354 AL44354 FC 149-4-04940-000A-K0343 190 35 - 74 259 63 1”SAE 1554 96 343 190
715 05 404 AL45404 FC 149-4-05180-070A-K0343 190 34 - 68 270 66 1”SAE 1634 96 343 190
715 05 422 AL45422 FC 149-4-05460-070A-K0343 190 34 - 64 280 69 1”SAE 1714 96 343 190
715 06 260 AL64260 FC 169-4-04280-000A-K0343 190 53 - 81 268 73 1”SAE 1394 106 343 190
715 06 290 AL64290 FC 169-4-04620-000A-K0343 190 52 - 82 282 78 1”SAE 1479 106 343 190
715 06 320 AL64320 FC 169-4-04940-000A-K0343 190 51 - 79 295 84 1”SAE 1559 106 343 190
715 06 390 AL65390 FC 169-4-05180-000A-K0343 190 51 - 84 310 87 1”SAE 1629 106 343 190
715 06 410 AL75410 FC 169-5-05355-000A-K0343 190 35 - 74 285 80 1”SAE 1384 106 343 190
715 06 430 AL65430 FC 169-4-05460-000A-K0343 190 50 - 81 319 92 1”SAE 1699 106 343 190
715 06 440 AL65440 FC 169-4-05700-000A-K0343 190 49 - 77 329 96 1”SAE 1769 106 343 190
715 06 450 AL75450 FC 169-5-05780-000A-K0343 190 35 - 66 300 87 1”SAE 1469 106 343 190
715 06 490 AL76490 FC 169-5-06180-000A-K0343 190 34 - 62 314 93 1”SAE 1549 106 343 190
715 06 550 AL76550 FC 169-5-06830-000A-K0343 190 34 - 57 340 102 1”SAE 1709 106 343 190
715 06 580 AL77580 FC 169-5-07130-000A-K0343 190 34 - 50 351 107 1”SAE 1759 106 343 190
715 06 678 AL77678 FC 169-5-07630-004A-K0343 190 33 - 47 373 114 1”SAE 1889 106 343 190
715 06 720 AL78720 FC 169-5-08130-000A-K0486 190 33 - 46 387 122 1”SAE 1989 106 486 190
715 06 860 AL79860 FC 169-5-09030-000C-K0486 150 26 - 35 424 135 1”SAE 2209 106 486 190
715 06 910 AL79910 FC 169-5-09530-000D-K0486 135 23 - 30 441 143 1”SAE 2309 106 486 190
715 07 424 AL85424 FC 191-4-05460-000A-K0343 190 68 - 90 381 120 1”SAE 1712 116 343 190
715 07 452 AL85452 FC 191-5-05780-000A-K0343 190 51 - 83 358 114 1”SAE 1482 116 343 190
715 07 490 AL86490 FC 191-5-06180-000A-K0343 190 59 - 79 375 122 1”SAE 1562 116 343 190
715 07 580 AL87580 FC 191-5-07130-000A-K0343 190 49 - 72 420 140 1”SAE 1772 116 343 190
715 07 680 AL87680 FC 191-5-07630-004A-K0343 190 49 - 69 447 150 1”SAE 1902 116 343 190
715 07 720 AL88720 FC 191-5-08130-000A-K0486 190 48 - 67 463 160 1”SAE 2002 116 343 190
715 07 860 AL89860 FC 191-5-09030-000B-K0486 170 43 - 57 508 177 1”SAE 2212 116 486 190
715 07 910 AL89910 FC 191-5-09530-000C-K0486 150 37 - 49 529 187 1”SAE 2312 116 486 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

max. 29° (extended) max. 29° (extended)

H*

H*
K*

K*
L

L
J

* including pull out * including pull out

FC 214 Front-end cylinder with outer cover

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 08 860 AL99860 FC 214-5-09030-000B-K0486 170 59 - 79 581 227 1”SAE 2197 135 486 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

PG-E 00000177 / 11-07-01 / RV AE 01-5

 Hyva Cylinders
Front-end with eye

FE 091, 110 & 129 front-end cylinders with eye

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 32 160 AQ03160 FE 091-3-03205-001A-K1424 190 11 - 18 92 16 1”SAE 1477 81 1424 160
715 33 164 AQ13164 FE 110-3-03205-009A-K1399 190 21 - 46 98 24 1”SAE 1452 86 1399 190
715 33 200 AQ13200 FE 110-3-03700-001A-K1529 190 20 - 37 109 28 1”SAE 1582 86 1529 190
715 34 180 AQ23180 FE 129-3-03460-001A-K1449 190 33 - 59 129 37 1”SAE 1502 91 1449 190
715 34 220 AQ23220 FE 129-3-03880-001A-K1609 190 32 - 56 142 42 1”SAE 1652 91 1609 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

R53 R53

max. 29° (extended) max. 29° (extended)

H*
H*

K*
K*

L
L

J
J

* including pull out * including pull out

FE 149, 169, 191 & 214 front-end cylinders with eye

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 35 226 AQ43226 FE 149-3-03880-009A-K1644 190 47 - 68 168 56 1”SAE 1697 96 1644 190
715 35 300 AQ44300 FE 149-4-04620-009A-K1484 190 35 - 70 171 59 1”SAE 1527 96 1484 190
715 35 320 AQ44320 FE 149-4-04940-001A-K1529 190 34 - 66 179 63 1”SAE 1582 96 1529 190
715 36 302 AQ64302 FE 169-4-04620-019A-K1479 190 51 - 83 206 78 1”SAE 1522 106 1479 700
715 36 392 AQ65392 FE 169-4-05180-011A-K1604 190 50 - 83 227 88 1”SAE 1657 106 1604 290
715 36 426 AQ75426 FE 169-5-05355-019A-K1394 190 35 - 66 212 80 1”SAE 1437 106 1394 700
715 36 470 AQ75470 FE 169-5-05780-019A-K1559 190 34 - 60 224 87 1”SAE 1612 106 1559 700
715 36 504 AQ76504 FE 169-5-06180-019A-K1559 190 34 - 58 236 93 1”SAE 1612 106 1559 700
715 36 522 AQ76522 FE 169-5-06480-011A-K1604 190 34 - 56 247 97 1”SAE 1657 106 1604 290
715 36 556 AQ76556 FE 169-5-06830-011B-K1674 170 30 - 48 258 102 1”SAE 1723 106 1674 700
715 36 594 AQ77594 FE 169-5-07130-019C-K1769 150 26 - 37 266 107 1”SAE 1822 106 1769 700
715 37 490 AQ86490 FE 191-5-06180-011A-K1527 190 49 - 84 281 122 1”SAE 1570 116 1527 700
715 37 668 AQ87668 FE 191-6-07420-019B-K1677 170 30 - 43 300 131 1”SAE 1720 116 1677 700
715 37 860 AQ89860 FE 191-5-09030-011E-K2177 110 27 - 36 395 177 1”SAE 2230 116 2177 290
715 38 584 AQ97582 FE 214-5-07130-011A-K1722 190 60 - 84 380 180 1”SAE 1784 135 1722 390
* incl. 20 mm pull out (p.o.); tolerances -5 +30

Dash pot and last stage double acting cylinders

Part no. Kit no. Description Press Tipping Weight Vol. Oil H* J K* L
(bar) weight (tons) (kg.) (ltr.) inlet (mm) (mm) (mm) (mm)
715 34 228 - FE 129-3-03850-009A-K1609-DP 190 32 - 55 142 41 1”SAE 1662 91 1609 190
715 04 172 - FC 129-3-03410-009A-K0343-1DA 190 34 - 57 172 37 1”SAE 1484 91 343 190
715 05 380 - FC 149-4-05150-009A-K0343-1DA 190 34 - 67 260 66 1”SAE 1644 96 343 190
* incl. 20 mm pull out (p.o.); tolerances -5 +30

PG-E 00000177 / 11-07-01 / RV AE 01-6

 Hyva Cylinders
Brackets and cradles

FC 077
Part no. Description Kg
015 06 612 Lifting bracket left FC 077 4,0
015 06 614 Lifting bracket right FC 077 4,0
015 06 018 Chassis bracket FC 077 *) 3,6
015 07 545 Cylinder cradle FC 077, 160 mm *) 24,0

dimensions L1 L2 L3 L4
FC 077 236 200 202 152
*) When a cylinder cradle (015 07 545) is used no chassis
brackets (015 06 018) are required.

L1
140 L2
110 445
76

100
45
35

33
25
Ø13

197

222
45 160
1000
L3 70
100

124
38
Ø11

30

51 40 38
29
29
51
L4
203

PG-E 00000177 / 11-07-01 / RV AE 01-7

 Hyva Cylinders
Brackets and cradles

FC/FE 091,093 & FC/FE 110 (narrow cradle) We advise to mount the chassis and lifting brackets with the
bolts to the outer side or the inner side of the slotted hole. In
Part no. Description Kg this way the washer and bolt clamp on maximum surface and
015 09 110 Lifting bracket right FC 091/110 4,5 can absorb the largest forces.
015 09 111 Lifting bracket left FC 091/110 4,5
015 06 025 Chassis bracket FC/FE 091/110 6,7 Max. 1 mm clearance between each bracket and the cylinder.
015 07 512 Cylinder cradle FC/FE 091/110 25,2

dimensions L1 L2 L3 L4 *) L5 *)
FC 091 304 261 274 138 out 240 out
FC 110 304 261 301 138 in 240 in
*) in = inner position of slotted hole
out = outer position of slotted hole

L1
140 L2

51 138 51 145 205

74
31

65
45 60
60

13
64

160
32 50

197
216 13
60
1000
L3
60
15
13

53
22
42
87 L4
204 L5

PG-E 00000177 / 11-07-01 / RV AE 01-8

 Hyva Cylinders
Brackets and cradles

FC/FE 110/129/149 (narrow cradle) We advise to mount the chassis and lifting brackets with the
bolts to the outer side or the inner side of the slotted hole. In
Part no. Description Kg this way the washer and bolt clamp on maximum surface and
015 09 120 Lifting bracket right FC 110/129 6,5 can absorb the largest forces. Do not place the bolt in the
015 09 121 Lifting bracket left FC 110/129 6,5 centre of the slotted holes if tipping weight exceeds 50 tons.
015 06 035 Chassis bracket FC/FE 110/129/149 12,2
015 07 513 Cylinder cradle FC/FE 110 wide 41,8 Max. 1 mm clearance between each bracket and the cylinder.
015 07 516 Cylinder cradle FC/FE 129/149 41,6
FC 129 can also be combined with lifting brackets 015 09 130/131
FC 149 must be combined with lifting brackets 015 09 130/131
dimensions L1 L2 *) L3 L4 *) L5 *)
FC 110 299 237 out 307 103 in 223 in
FC 129 444 376 out 345 141 in 261 in
FC 149 - - 345 141 in 261 in
*) in = inner position of slotted hole
out = outer position of slotted hole

L1 FC/FE 110
178 L2

60 104 60 145 287

90

45
41

45 60
60

17
70

195
32 50
102
17

159 Ø160
216
240
90 14 FC/FE 129
L3
60 14 60 200 60 145 287
45
41

60
17

76
17
70

195
35 50
35
76
L4 60 141 60 Ø160
286
L5

PG-E 00000177 / 11-07-01 / RV AE 01-9

 Hyva Cylinders
Brackets and cradles

FC/FE 129/149/169/191 We advise to mount the chassis and lifting brackets with the
bolts to the outer side or the inner side of the slotted hole. In
Part no. Description Kg this way the washer and bolt clamp on maximum surface and
015 09 130 Lifting bracket right FC 129/149/169/191 9,5 can absorb the largest forces. Do not place the bolt in the
015 09 131 Lifting bracket left FC 129/149/169/191 9,5 centre of the slotted holes if tipping weight exceeds 50 tons.
015 06 050 Chassis bracket FC/FE 149/169/191 14,3
015 07 520 Cylinder cradle FC/FE 149/169/191 48,0 Max. 1 mm clearance between each bracket and the cylinder.
FC/FE 129 can not be used with cradle 015 07 520
dimensions L1 L2 *) L3 L4 *) L5 *)
FC 129 462 410 out - - -
FC 149 462 410 out 345 141 in 261 in
FC 169 462 410 out 387 211 out 331 out
FC 191 482 410 in 387 211 out 331 out
*) in = inner position of slotted hole
out = outer position of slotted hole
L1
229 L2 60 141 60
140 140 145 368

100
65

70 41
50
127
102
45 17

195
60

32

75
200 60 204 60 200 90
102
17

159
216
241 990
76 13

L3
60 14
17

76
35
35 600
76
L4
368
L5

PG-E 00000177 / 11-07-01 / RV AE 01-10

 Hyva Cylinders
Brackets and cradles

FC/FE 214 We advise to mount the chassis and lifting brackets with the
bolts to the outer side or the inner side of the slotted hole. In
Part no. Description Kg this way the washer and bolt clamp on maximum surface and
015 06 726 Lifting bracket left FC 214 10,0 can absorb the largest forces. Do not place the bolt in the
015 06 728 Lifting bracket right FC 214 10,0 centre of the slotted holes if tipping weight exceeds 50 tons.
015 06 052 Chassis bracket FC/FE 214 14,0
FC/FE 214 cylinders can not be combined with a cradle Max. 1 mm clearance between each bracket and the cylinder.

dimensions L1 L2 *) L3 L4 *) L5 *)
FC 214 482 410 in 412 211 in 331 in
*) in = inner position of slotted hole
out = outer position of slotted hole

L1
229 L2

127
102
45
60

32
102
17

159
216
241
100 15

L3
65 14
17

76
35
35
76
L4
368
L5

Bearing bush for bracket

Part no. Description D L
(mm) (mm)
017 94 210 Bearing bush chassis bracket (214) 65 50
017 94 240 Bearing bush general bracket 60 50
017 94 230 Bearing bush lift. bracket (091-129) 60 40

PG-E 00000177 / 11-07-01 / RV AE 01-11

 Hyva Cylinders
Top brackets & bolt sets

Top bracket (complete) Spare parts for top bracket 015 06 777
Part no. Description Weight (Kg) Part no. Description Position
015 06 777 Top bracket FE cylinders - pin 50 11,0 017 70 255 Pin Clevis type VII 1
015 06 772 Top bracket FE 191-4/214-5 - pin 60 10,8 017 92 555 Filler ring (2 pieces) 2
017 70 275 Split Pin Clevistop (2 pieces) 3

01506777 correct mounting position

210 170
160 120

20
19(4x)
75
50

39
5
R4

68 2 3
1

01506772 210
85
105
60

47
R

165
45

20 75 38
correct mounting position

Bracket mounting bolt sets Top nut and washer

Part no. Description Qty. of bolts Part no. Description key width
Q 006 Lifting bracket bolt set M16x60 12 017 02 890 K Top nut and washer - FC - M48 75
Q 007 Lifting bracket bolt set M16x70 12
Q 005 Chassis bracket bolt set M16x50 16

PG-E 00000177 / 11-07-01 / RV AE 01-12

 Hyva Cylinders
Seal sets for FC / FE & Caps

Seal sets for FC & FE cylinders

Cylinder Part no. Description
FC/FE 077 - 3 731 12 230 Seal kit complete FC/FE 077-3
FC/FE 091 - 3 719 01 230 K Seal kit complete FC/FE 091-3
FC/FE 110 - 3 719 01 330 K Seal kit complete FC/FE 110-3
FC/FE 129 - 3 719 01 430 K Seal kit complete FC/FE 129-3
FC/FE 129 - 4 719 01 440 K Seal kit complete FC/FE 129-4
FC/FE 149 - 3 719 01 530 K Seal kit complete FC/FE 149-3
FC/FE 149 - 4 719 01 540 K Seal kit complete FC/FE 149-4
FC/FE 149 - 5 719 01 550 K Seal kit complete FC/FE 149-5
FC/FE 169 - 4 719 01 640 K Seal kit complete FC/FE 169-4
FC/FE 169 - 5 719 01 650 K Seal kit complete FC/FE 169-5
FC/FE 191 - 4 719 01 740 K Seal kit complete FC/FE 191-4
FC/FE 191 - 5 719 01 750 K Seal kit complete FC/FE 191-5
FC/FE 191 - 6 719 01 760 K Seal kit complete FC/FE 191-6
FC/FE 214 - 5 719 01 850 K Seal kit complete FC/FE 214-5
FC/FE 214 - 6 719 01 860 K Seal kit complete FC/FE 214-6

Cylinder caps
Part no. Description
718 38 945 Cylinder cap FE/FEE 110
718 38 950 Cylinder cap FE/FEE 129
718 38 955 Cylinder cap FE/FEE 149
718 38 960 Cylinder cap FE/FEE 169
718 38 965 Cylinder cap FE/FEE 191-5/6
718 38 970 Cylinder cap FE/FEE 214-5
718 38 975 Cylinder cap FE/FEE 214-6/7
718 38 983 Dust ring base FE 169-5
718 38 984 Dust ring base FE 191-5/6
017 02 973 Cylinder cap FC 129
017 02 972 Cylinder cap FC 149/169
017 02 971 Cylinder cap FC 191/214

PG-E 00000177 / 11-07-01 / RV AE 01-13

 Hyva Cylinders
UMB/UME under body cylinders

Three-way under body tipping cylinder UMB/UME

UMB/UME cylinders are delivered including a BSPOT adapter. The tipping weight is calculated at 220 bar
(is maximum working pressure). The cradle, knock-off and brackets need to be ordered separately.

Part no. Description Tipping weight Body length Weight Oil inlet ØW K*
(tons) (kg.) (mm) (mm)
714 04 203 UMB 129-3-0700-K318-45-½“-HC 15 - 21 2400 - 3100 46 ½” 45 318
714 04 291 UMB 129-4-1020-K205-45-½“-HC 12 - 20 3100 - 4000 49 ½” 45 205
714 04 429 UMB 129-4-1500-K205-45-½“-HC 11 - 20 4100 - 5400 60 ½” 45 205
714 04 421 UMB 129-5-1480-K192-45-½“-HC 6 - 17 4100 - 5400 59 ½” 45 192
714 04 537 UMB 129-5-1880-K192-45-½“-HC 6 - 17 4900 - 6500 67 ½” 45 192
714 05 429 UMB 149-4-1500-K265-50-¾“-HC 18 - 28 4300 - 5600 76 ¾” 50 265
714 05 365 UMB 149-5-1280-K258-50-¾“-HC 12 - 23 3800 - 5000 64 ¾” 50 258
714 05 421 UMB 149-5-1480-K258-50-¾“-HC 12 - 23 4200 - 5600 69 ¾” 50 258
714 05 537 UMB 149-5-1880-K258-50-¾“-HC 11 - 23 5100 - 6700 79 ¾” 50 258
714 05 509 UMB 149-6-1780-K245-50-¾“-HC 6 - 17 4900 - 6400 75 ¾” 50 245
714 06 421 UMB 169-5-1480-K265-50-¾“-HC 19 - 29 4400 - 5800 84 ¾” 50 265
714 06 537 UMB 169-5-1880-K265-50-¾“-HC 18 - 28 5300 - 7000 96 ¾” 50 265
714 06 509 UMB 169-6-1780-K258-50-¾“-HC 12 - 23 5000 - 6700 86 ¾” 50 258
714 06 647 UMB 169-6-2260-K258-50-¾“-HC 13 - 25 5600 - 7300 99 ¾” 50 258
714 06 517 UMB 169-7-1800-K245-50-¾“-HC 7 - 17 5100 - 6700 85 ¾” 50 245
714 06 675 UMB 169-7-2360-K245-50-¾“-HC 7 - 19 5700 - 7500 99 ¾” 50 245
714 07 511 UMB 191-6-1780-K270-60-¾“-HC 19 - 34 5000 - 6700 107 ¾” 60 270
714 07 519 UMB 191-7-1800-K278-60-¾“-HC 12 - 28 5100 - 6800 108 ¾” 60 278
714 07 681 UMB 191-8-2380-K278-60-¾“-HC 7 - 22 5800 - 7600 116 ¾” 60 278
* K dimension is including 20 mm pull-out -0 +20

PG-E 00000177 / 11-07-01 / RV AE 01-14

 Hyva Cylinders
UM Seal kits & nipples

Seal kits for UMB/UME cylinders 719 04 450K

Part no. Description
719 04 430K Seal kit complete UM 129 - 3
719 04 440K Seal kit complete UM 129 - 4
719 04 450K Seal kit complete UM 129 - 5
719 04 451K Seal kit complete UM 129 - 5 (>500)*
719 04 540K Seal kit complete UM 149 - 4
719 04 550K Seal kit complete UM 149 - 5
719 04 560K Seal kit complete UM 149 - 6
719 04 650K Seal kit complete UM 169 - 5
719 04 660K Seal kit complete UM 169 - 6
719 04 670K Seal kit complete UM 169 - 7
719 04 760K Seal kit complete UM 191 - 6
719 04 770K Seal kit complete UM 191 - 7
719 04 780K Seal kit complete UM 191 - 8

* Kits marked with (>L) to be used for cylinders with the tube
lengths exceeding the listed length.

Nipple for oil inlet UMB/UME

Part no. Description
731 03 000 Oil inlet nipple UM ½” - M18 x 1,5
731 03 002 Oil inlet nipple UM ¾” - M22 x 1,5

PG-E 00000177 / 11-07-01 / RV AE 01-15

 Hyva Cylinders
Brackets UM - series

Brackets for UMB/UME cylinders (2 required)

Part no. Description ØR (mm) S (mm) T (mm) U (mm) V (mm) W (mm) ØX (mm) Weight (kg)
731 05 073 Bracket UM 129 to bolt D45 45,5 105 140 45 33 15 15 1,0
731 05 076 Bracket UM 149-169 to bolt D50 50,5 120 155 50 37 17 15 1,4
731 05 079 Bracket UM 191 to bolt D60 60,5 130 165 50 42 17 15 1,6

ØR
W

S U
T
ØX

Weldable brackets for cradles (2 required)

Part no. Description For ØR (mm) S (mm) T (mm) U (mm) V (mm) W (mm) ØX Weight (kg)
Cradle
731 05 035 Welding bracket UM D50 129-169 50 80 122 39 20 85 M12 1,5
731 05 036 Welding bracket UM D60 191 60 90 122 39 25 90 M12 2,1

PG-E 00000177 / 11-07-01 / RV AE 01-16

 Hyva Cylinders
Cradle UM - series

Cradles for UMB/UME cylinders

Part no. Description J (mm) K (mm) L (mm) ØM (mm) N (mm) O (mm) ØP (mm) Q (°) Weight (kg)
731 04 021 Cradle UM 129 - PIN50-D45 280 180 135 45 35 39 50 60 13,8
731 04 031 Cradle UM 149 - PIN50-D50 330 210 152 50 37 39 50 60 20,4
731 04 041 Cradle UM 169 - PIN50-D50 380 235 162 50 37 39 50 60 26,5
731 04 051 Cradle UM 191 - PIN60-D60 400 250 190 60 45 39 60 60 38,9

731 04 031

Cradles with knock-off and brackets for UMB/UME cylinders

Part no. Description G H J K L ØM N O ØP Q T Weight
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (°) (mm) (kg)
731 04 033 Cradle UM 149 - KOPN-PIN50-D50 310 137 330 210 152 50 37 39 50 60 122 26,7
731 04 043 Cradle UM 169 - KOPN-PIN50-D50 320 137 380 235 162 50 37 39 50 60 122 33,0
731 04 053 Cradle UM 191 - KOPN-PIN60-D60 340 147 400 250 190 60 45 39 60 60 122 45,6

731 04 043

PG-E 00000177 / 11-07-01 / RV AE 01-17

 Hyva Cylinders
KRA/KRM cylinders

Three-way underbody tipping cylinder KR

KRA/KRM cylinders are delivered including a ¾”BSPOT adapter.The working pressure of the cylinders is 280 Bar (300
max.) The cradle, knock-off and brackets are already mounted. KRM standard has a pneumatic knock-off, KRA standard
has a hydraulic knock-off. The tipping weight is calculated at 275 bar.

KRM cylinders
Part no. Description Tipping Kg. Ltr. I K* C A cradle
weight (tons) (mm) (mm) (mm) (mm) /ball
014 12 060 KRM 145/6/1465 9 - 20 89 12,1 130 316 170 180 2/3
014 12 080 KRM 145/6/1825 9 - 20 99 14,9 130 376 170 180 2/3
014 12 110 KRM 167/5/1410 22 - 32 132 18,9 145 353 196 207 3/4
014 12 210 KRM 167/6/1680 15 - 26 131 19,8 146 331 196 207 3/3
014 12 215 KRM 167/6/1860 15 - 26 139 21,9 146 361 196 207 3/3
014 12 220 KRM 167/6/2040 14 - 25 147 24,0 146 391 196 207 3/3
014 12 240 KRM 167/7/2155 11 - 22 137 23,0 146 369 196 207 3/3
014 12 255 KRM 193/6/1695 20 - 32 206 27,2 190 312 228 240 4/4
014 12 280 KRM 193/7/1955 16 - 28 207 28,4 190 312 228 240 4/4
014 12 285 KRM 193/7/2165 18 - 32 217 31,4 190 342 228 240 4/4
014 12 308 KRM 193/8/2705 14 - 25 150 35,3 190 364 228 240 4/3
014 12 590 KRM 223/7/2375 20 - 38 250 51,3 200 362 260 260 4/4
014 12 610 KRM 223/8/2215 18 - 38 230 38,7 200 316 260 260 4/4
014 12 615 KRM 223/8/2455 18 - 38 240 42,8 200 346 260 260 4/4
014 12 680 KRM 223/9/2775 11 - 28 250 49,0 200 346 260 260 4/4
* incl. 15 mm pull out (p.o.); tolerances -0 +15

KRA cylinders
Part no. Description Tipping Kg. Ltr. I K* C A cradle
weight (tons) (mm) (mm) (mm) (mm) /ball
014 11 200 A KRA 125/3/1635 15 - 20 125 15,2 435 365 148 180 2/3
014 12 045 A KRA 145/3/1485 18 - 23 164 18,7 290 435 170 205 3/5
014 11 480 A KRA 167/3/2535 28 - 35 266 43,2 610 515 196 228 3/5
014 12 008 A KRA 167/6/2385 13 - 29 154 28,1 305 315 196 228 3/3
014 12 009 A KRA 193/5/2235 28 - 35 258 39,8 316 385 228 266 4/5
014 12 038 A KRA 193/5/3835 28 - 35 368 68,2 541 515 228 266 4/5
* incl. 15 mm pull out (p.o.); tolerances -0 +15

30° ØP
ØY
H*

30° C Cradle dimensions

K*

Cradle Type 2 Type 3 Type 4

R(mm) 369 472 538
Q(mm) 359 370 455
W(mm) 50 50 60
I

A ØW Ball & cup dimensions

Ball & cup Type 3 Type 4 Type 5
R Q
P(mm) 125 145 145
Y(mm) 60 75 80

PG-E 00000177 / 11-07-01 / RV AE 01-18

 Hyva Cylinders
KRA/KRM seal kits

Seal kits for KRM/KRA cylinders

Part no. Description
014 16 140 Seal kit complete KRM 145 - 6
014 16 152 Seal kit complete KRM 167 - 5
014 16 150 Seal kit complete KRM 167 - 6
014 16 160 Seal kit complete KRM 193 - 7
014 16 170 Seal kit complete KRM 223 - 8
014 16 172 Seal kit complete KRM 223 - 9
014 16 013 Seal kit complete KRA 125 - 3
014 16 015 Seal kit complete KRA 145 - 3
014 16 018 Seal kit complete KRA 167 - 3
014 16 021 Seal kit complete KRA 167 - 6
014 16 025 Seal kit complete KRA 193 - 5

014 16 021 014 16 170

PG-E 00000177 / 11-07-01 / RV AE 01-19

PG-E 00000177 / 11-07-01 / RV AE