Scribd
Upload
266 views5 pages

Procedure For Realdisp4

Realdisp 4 is a tool for monitoring parameters in the UM500 controller for KOMTRAX Plus. It requires a laptop, downloading cable, and serial-USB converter. The procedure involves running Realdisp4.exe, selecting a machine template, connecting the laptop to the machine's downloading port, selecting a COM port, clicking start to begin monitoring, and checking the Temp folder for the recorded testlog.csv file. Realdisp 4 monitors parameters every 1 to 3 seconds and records the data to Excel templates.

Uploaded by

ridhwan wahyudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
266 views5 pages

Procedure For Realdisp4

Realdisp 4 is a tool for monitoring parameters in the UM500 controller for KOMTRAX Plus. It requires a laptop, downloading cable, and serial-USB converter. The procedure involves running Realdisp4.exe, selecting a machine template, connecting the laptop to the machine's downloading port, selecting a COM port, clicking start to begin monitoring, and checking the Temp folder for the recorded testlog.csv file. Realdisp 4 monitors parameters every 1 to 3 seconds and records the data to Excel templates.

Uploaded by

ridhwan wahyudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Procedure for "Realdisp 4"

ver. Nov1020
1. Purpose
Realdisp 4 is the tool for monitoring parameters inside of UM500 controller for KOMTRAX Plus.

2.Preparation
Following items are required for using Realdisp 4
a) Laptop PC
Confirm "Temp" folder in C Drive in the Laptop PC.
(Create "Temp" folder if it's not available)
b) Downloading cable for KOMTRAX Plus (P/N: 799-608-3220)
c) Serial-USB converter*
* In case of Laptop PC which does not have serial (RS232C)port
3. Interface to be used

Download port and cable for KOMTRAX Plus data to be used for Realdisp 4.
(RS232C interface )

Fig.1 Downloading port (Machine side)

Serial-USB converter
(Aftermarket parts)

Downloading cable
P/N:799-608-3220

Fig.2 Downloading cable


4. Procedure

a) Run "Realdisp4.exe" on your laptop PC.

It's better to prepare "Shortcut" for the software on desktop of the laptop PC.

b) Click the button shown below to select 'template' when


control window will be appeared on the laptop PC

Click here for select


template

c) Select template for model which you will connect and monitor with Realdisp4.

Open File

Template

Open

NOTE: Templates for following models have been available at this stage.
HD785-7, HD1500-7, WA600-6, PC1250-7
Contact WebCARE support center if templates for another model is required.
d) Click start when you select a template. Excel screen (template) will be coming up.

Click

Template screen
(Reading parameters)

e) Connect the laptop PC to the machine for monitoring.

NOTE:
It is recommended to connect between "Downloading port inside of operators
cabin" and your laptop PC for Realdisp4.
Grand-downloading port is not recommendable for Realdisp4 due to safety reason.
f) Select COM port for connection. Check "Log" for recording data into your laptop PC.

Select COM port

Check "Log" for recording data

Click Start button

NOTE: Realdisp4 is supporting either "COM1" or "COM2" on your laptop PC.


Confirm COM setting on your PC and change it properly in case of your COM setting
is out of range( COM3 and up) .

g) Confirm parameter leadings on the template opened.


Local time of the controller.

Parameters are changed


valuably while activating
Realdisp4

NOTE Monitoring interval of Realdisp4 is vary depend on network condition


of the machine.
(Every 1 to 3 seconds at normal cases)
f) Click "Stop" button to stop monitoring.

g) Check "Temp" folder in the laptop PC to check recorded file.

"testlog.csv" is the receded data by Realdisp4.

NOTE: Same file name "testlog.csv" to be used for recording the data by Realdisp4.
Recommend to change the filename in case of data recording more than
twice. Old data will be overwritten without changing the file name.

You might also like