Scribd
Upload
48 views

Task Day-2, Module 3: 25Th. National Skills Competition 2017

The document provides instructions for a mechanical design challenge task to modify an existing crane design by adding a floating jack to support the legs. Competitors have 2 hours to complete assembly drawings and renderings of the modification, including an assembly drawing scaled 1:10, an isometric shaded drawing scaled 1:15, and working drawings of any new parts scaled unspecified. The drawings will be evaluated based on fulfillment of the design brief, physical simulation, an exploded view simulation, and photo rendering quality.

Uploaded by

Miftahul Huda
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Task Day-2, Module 3: 25Th. National Skills Competition 2017

The document provides instructions for a mechanical design challenge task to modify an existing crane design by adding a floating jack to support the legs. Competitors have 2 hours to complete assembly drawings and renderings of the modification, including an assembly drawing scaled 1:10, an isometric shaded drawing scaled 1:15, and working drawings of any new parts scaled unspecified. The drawings will be evaluated based on fulfillment of the design brief, physical simulation, an exploded view simulation, and photo rendering quality.

Uploaded by

Miftahul Huda
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

25th.

NATIONAL SKILLS COMPETITION


Solo 2017

Task day-2, Module 3


Mechanical Design Challenge

INTRODUCTION
A potential customer of Crane manufacturing company want to order a special crane with an
additional option. They ask you to complete a proposal drawing and video animation of this
modification.

DESCRIPTION OF PROJECT AND TASKS


Base on the task module no. 1 that you have made, create a modification. You have to make an
additional device from the basic product. The additional option is a floating jack to support the legs.
Your task is to make a proposal drawing of this option.

You have 2 hours to complete this project.

INSTRUCTIONS TO THE COMPETITOR

Model and Assemble the Parts


1. Use your works of modul 1 as base model.
2. Create all required parts of your modification design.
3. The floating jack operate manually by hand (screw/ thread mechanism).
4. You may use steel plate and/ or solid cylinder steel as material for your additional
parts.
5. You may use also a standard part from content center to support your design

Create Drawings
1. On the first sheet (sheet format A2), create an 2D final complete assembly
drawing with 1 : 10 scale.
 Add balloons and a part list.
 The number of view is at the competitors discretion, section view is needed to
show the hidden parts.
 Indicate in the drawing, the three major dimensions of the assembled product,
operational stroke angle and fold angle of the legs.
 The list should have 5 columns (Item, Qty., Part Number, Material and
Discription).
 All parts must be listed.

25th. National Skills Competition - Solo 2017


25th. NATIONAL SKILLS COMPETITION
Solo 2017

2. On the second sheet2 (sheet format A2), create an isometric shaded of final
complete assembly drawing with 1 : 15 scale.
 Add balloons and a part list.
 The number of view is at the competitors discretion, section view is needed to
show the hidden parts.
 Indicate in the drawing, the three major dimensions of the assembled product,
operational stroke angle and fold angle of the legs.
 The list should have 5 columns (Item, Qty., Part Number, Material and
Discription).
 All parts must be listed.

3. On the third sheets (sheet format A3), create a working drawing of all new part,
unspecified scale. The number of view is at the competitors discretion, section view
is needed to show the hidden parts.

Output:
1. Save all your drawing as the instruction from jury.
2. Print out your drawing in A3 paper.

MARKING

Module Mechanical Design Challenge


Max Mark
3 (Criteria Name or Description)

3.1 Fulfilment of the Design Brief 5.00

3.2 Physical Simulation 5.00

3.3 Exploded view (simulation) 4.00

3.4 Photo rendering 1.00

25th. National Skills Competition - Solo 2017

You might also like