Scribd
Upload
357 views2 pages

VTU Logic Desgin

The VTU Logic Design syllabus covers 8 units that teach digital logic circuits and sequential logic circuits. Unit 1 covers basic logic gates, Boolean logic, and combinational logic circuits. Unit 2 covers data processing circuits like multiplexers and decoders. Unit 3 covers arithmetic circuits. Unit 4 covers timing circuits like clocks and flip-flops. Unit 5 covers registers and Unit 6 covers counters. Unit 7 covers sequential circuit design. Unit 8 covers digital integrated circuits like TTL and CMOS. The syllabus aims to teach students both the theoretical concepts and HDL implementation of digital logic circuits.

Uploaded by

manju_m
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
357 views2 pages

VTU Logic Desgin

The VTU Logic Design syllabus covers 8 units that teach digital logic circuits and sequential logic circuits. Unit 1 covers basic logic gates, Boolean logic, and combinational logic circuits. Unit 2 covers data processing circuits like multiplexers and decoders. Unit 3 covers arithmetic circuits. Unit 4 covers timing circuits like clocks and flip-flops. Unit 5 covers registers and Unit 6 covers counters. Unit 7 covers sequential circuit design. Unit 8 covers digital integrated circuits like TTL and CMOS. The syllabus aims to teach students both the theoretical concepts and HDL implementation of digital logic circuits.

Uploaded by

manju_m
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

VTU Logic Design Syllabus

UNIT 1:
1. Digital Logic: Overview of Basic Gates and Universal Logic Gates, AND-OR-Invert
Gates, Positive and Negative Logic, Introduction to HDL
2 Hours
1. Combinational Logic Circuits: Boolean Laws and Theorems, Sum-of-products Method,
Truth Table to Karnaugh Map, Pairs, Quads, and Octets, Karnaugh Simplifications, Don’t
Care Conditions, Product-of-sums Method, Product-of-sums Simplification,
Simplification by Quine-McClusky Method, Hazards and Hazard Covers, HDL
Implementation Models
5 Hours
UNIT 2:
1. Data-Processing Circuits: Multiplexers, Demultiplexers, 1-of-16 Decoder, BCD-to-
Decimal Decoders, Seven-segment Decoders, Encoders, EX-OR gates, Parity Generators
and Checkers, Magnitude Comparator, Read-only memory, Programmable Array Logic,
Programmable Logic, Troubleshooting with a Logic Probe, HDL Implementation of Data
Processing Circuits
6 Hours
UNIT 3:
1. Arithmetic Circuits: Binary Addition, Binary Subtraction, Unsigned Binary Numbers,
Sign-Magnitude Numbers, 2’s Complement Representation, 2’s Complement Arithmetic,
Arithmetic Building Blocks, The Adder-Subtractor, Fast Adder, Arithmetic Logic Unit,
Binary Multiplication and Division, Arithmetic Circuits using HDL
6 Hours
UNIT 4:
1. Clocks and Timing Circuits: Clock Waveforms, TTL Clock, Schmitt Trigger,
Monostables with Input Logic, Pulse-forming Circuits
2 Hours
1. Flip-Flops: RS Flip-flops, Gated Flip-flops, Edge-triggered RS, D, JK Flip-flops, Flip-
flop timing, JK Master-slave Flip-flops, Switch Contact Bounce Circuits, Various
Representations of Flip-flops, Analysis of Sequential Circuits, Conversion of Flip-flops –
a synthesis example, HDL implementation of Flip-flop
5 Hours
PART – B
UNIT 5:
1. Registers: Types of Registers, Serial In-Serial Out, Serial In-Parallel Out, Parallel In-
Serial Out, Parallel In-Parallel Out, Applications of Shift Registers, Register
Implementation in HDL
2 Hours
1. Counters: Asynchronous Counters, Decoding Gates, Synchronous Counters, Changing
the Counter Modulus, Decade Counters, Presettable Counters, Counter Design as a
Synthesis Problem, A Digital Clock, Counter Design Using HDL
5 Hours
UNIT 6:
1. Design of Sequential Circuit: Model Selection, State Transition Diagram, State Synthesis
Table, Design Equations and Circuit Diagram, Implementation using Read Only
Memory, Algorithmic State Machine, State Reduction Technique, Analysis of
Asynchronous Sequential Circuit, Problems with Asynchronous Sequential Circuits,
Design of Asynchronous Sequential Circuit
7 Hours
UNIT 7:
1. D/A Conversion and A/D Conversion: Variable, Resistor Networks, Binary Ladders, D/A
Converters, D/A Accuracy and Resolution, A/D Converter-Simultaneous Conversion,
A/D Converter-Counter Method, Continuous A/D Conversion, A/D Techniques, Dual-
Slope A/D Conversion, A/D Accuracy and Resolution
6 Hours
UNIT 8:
1. Digital Integrated Circuits: Switching Circuits, 7400 TTL, TTL Parameters, TTL
Overview, Open-collector Gates, Three-state TTL Devices, External Drive for TTL
Loads, TTL Driving External Loads, 74C00 CMOS, CMOS Characteristics, TTL-to-
CMOS Interface, CMOS-to TTL Interface
6 Hours

Text Book
1. Digital Principles and Applications, Donald P Leach, Albert Paul Malvino & Goutam
Saha, 6th Edition, TMH, 2006.
(Chapters 2, 3, 4, 6, Chapter 7-1, 7-2, 7-3, 7-6, 7-7, Chapters 8, 9, 10, 11-1 to 10, 12, 14-1 to 12).

Reference Books
1. Fundamentals of Digital Logic with Verilog Design, Stephen Brown, Zvonko
Vranesic, TMH, 2006.
2. Fundamentals of Logic Design, Charles H. Roth, Jr., 5th Edition, Thomson, 2004.
3. Digital Systems Principles and Applications, Ronald J. Tocci, Neal S. Widmer,
Gregory L. Moss, 10th Edition, PHI/Pearson Education, 2007.

You might also like