Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Install Xiomi Redmi Note4

    Uploaded by

    Anonymous 1wsbFPeTY
    The document provides instructions for solving the "status_sec_img_too_large" error when flashing a Redmi Note 4 phone. It describes downloading a custom image file, SP Flash Tool, and an official ROM for the phone. The instructions then detail replacing the existing image file and using SP Flash Tool in download-only mode to flash the phone while holding the volume down button until flashing is complete. A separate section provides steps for installing the Mediatek USB VCOM driver needed for flashing, which involves disabling driver signature enforcement in Windows before installation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Install Xiomi Redmi Note4

    Uploaded by

    Anonymous 1wsbFPeTY
    27 views4 pages
    The document provides instructions for solving the "status_sec_img_too_large" error when flashing a Redmi Note 4 phone. It describes downloading a custom image file, SP Flash Tool, and an official ROM for the phone. The instructions then detail replacing the existing image file and using SP Flash Tool in download-only mode to flash the phone while holding the volume down button until flashing is complete. A separate section provides steps for installing the Mediatek USB VCOM driver needed for flashing, which involves disabling driver signature enforcement in Windows before installation.

    Original Title

    INSTALL XIOMI REDMI NOTE4.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for solving the "status_sec_img_too_large" error when flashing a Redmi Note 4 phone. It describes downloading a custom image file, SP Flash Tool, and an official ROM for the phone. The instructions then detail replacing the existing image file and using SP Flash Tool in download-only mode to flash the phone while holding the volume down button until flashing is complete. A separate section provides steps for installing the Mediatek USB VCOM driver needed for flashing, which involves disabling driver signature enforcement in Windows before installation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    27 views4 pages

    Install Xiomi Redmi Note4

    Uploaded by

    Anonymous 1wsbFPeTY
    The document provides instructions for solving the "status_sec_img_too_large" error when flashing a Redmi Note 4 phone. It describes downloading a custom image file, SP Flash Tool, and an official ROM for the phone. The instructions then detail replacing the existing image file and using SP Flash Tool in download-only mode to flash the phone while holding the volume down button until flashing is complete. A separate section provides steps for installing the Mediatek USB VCOM driver needed for flashing, which involves disabling driver signature enforcement in Windows before installation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 4

    Apa kalian sedang mengalami brom : error status_sec_img_too_large ?

    saat ini saya sedang


    mengalaminya juga pada saat flash di note 4, tapi jangan khawatir berikut ini cara yang saya
    lakukan.

    Silahkan Download Semua Bahan Dibawah ini:


    - Cust.img pengganti
    - SP Flash Tool v5.1640.00
    - ROM official Redmi Note 4 (Code Name : Nikel)

    Jika sudah download semua bahan diatas, sekarang lakukan seperti dibawah ini:

    Replace cust.img yang ada di folder “nama rom”/images dengan cust.img hasil download
    tadi.
    Ekstrak SP Flash Tool v5.1640.00 kemudian run as administrator
     Download agent pilih MTK_AllInOne_DA.bin dari folder SP Flash Tool
     Scatter loading pilih MT6797_android_scatter.txt
     PENTING!!!! Jangan centang preloader pada SP Flash Tool
     Pastikan SP Flash Tool dalam mode “Download Only”
     Tekan “Download” di SP Flah Tool kemudian sambungkan kabel data ke PC/laptop
    (hh jangan di sambungkan dulu)
     Pastikan Redmi Note 4 dalam keadaan mati, tekan tombol volume down (vol -) lalu
    sambungkan ke PC/laptop, akan muncul bar berwarna merah di bagian bawah SP Flash tool
     Tetap tekan “vol down” sampai bar berubah menjadi warna kuning tanda proses
    flashing sdh berjalan.
     Tunggu sampai proses flashing selesai ditandai dengan munculnya tanda centang
    besar yang berwarna hijau. Cabut hh dari PC/laptop kemudian hidupkan.
     Semoga sukses...

    Cara Instal Mediatek USB VCOM Driver di


    Windows 8 / 10
    By CPPosted on December 31, 2016

    Banyak User yang gagal menginstal Mediatek USB VCOM driver di Windows 8,8.1,10. Cara
    menginstal USB VCOM Driver ini sedikit berbeda dengan cara menginstal di Windows 7. USB VCOM
    ini diperlukan untuk proses flashing Firmware menggunakan SP Flash tool atau sejenis nya.

    Apa itu Mediatek?


    USB VCOM adalah driver yang dibutuhkan untuk proses flashing menggunakan SP Flash tool.

    Berikut Langkah – langkahnya :

    1. Pertama, kita harus Disable Driver Signature Enforcement . Dengan cara Tekan Windows +
    X pada PC. Kemudian pilih “Command prompt (admin)”.
    Atau alternatif lain adalah dengan Tekan Start > Kemudian Cari “Windows System” > klik
    kanan pada Command Prompt dan pilih ” Run as Administrator“.
    2. Pada Command promt, masukan perintah dibawah ini. Pastikan penulisannya benar.

    bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS

    3. Tekan enter, Pastikan nanti Muncul Tulisan ” The Operation Completed Successfully“

    4. dan lanjutkan dengan perintah dibawah ini, jangan salah ketik ya

    bcdedit.exe -set TESTSIGNING ON

    5. Tekan enter. dan pastikan lagi muncul tulisan “The Operation Completed Successfully”

    6. Setelah selesai. Silahkan Di Restart Komputer nya.


    7. Jika sudah selesai, selanjutnya adalah proses Penginstalan Mediatek USB VCOM Driver nya.
    8. Silahkan ikuti Tutorial berikut : Menginstal Mediatek USB VCOM Driver setelah selesai
    Disable Driver Signature Enforcement Pada Windows 8 / 8.1 / 10

    Bagi yang ingin Enable Driver Signature enforcement nya lagi, silahkan ikuti Tutorial dibawah ini

    Untuk Cara Enable Driver Signature Enforcement.

    1. Buka lagi Command promt dengan cara Tekan Windows + X pada PC. Kemudian pilih
    “Command prompt (admin)”. atau alternatif lain adalah dengan Tekan Start > Kemudian
    Cari “Windows System” > klik kanan pada Command Prompt dan pilih ” Run as
    Administrator“.
    2. Pada Command Prompt, ketikan perintah dibawah

    bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS

    3. Tekan Enter, kemudian ketikan lagi perintah dibawah

    bcdedit.exe -set TESTSIGNING OFF


    4. Tekan enter
    5. Sekarang Driver Signature enforcement sudah diaktifkan kembali.

    You might also like