40RM PDF

40RM/RMS
Packaged Air-Handling Units

50/60 Hz
6 to 30 Nominal Tons (21 to 105 kW)
Product Data
Features / Benefits
· Multiposition design can be installed
horizontally or vertically without
modification
· Standard double skin units for a
better indoor air quality (IAQ)
· Polyester powder painted zinc coated

steel panels provide additional protec
tion against rusting & discoloration
in areas with high UV factor
· High-static design meets a wider
range of applications than competi
tive packagedair handler lines
· Economizer accessory provides ven

tilation air and ``free'' cooling
· Cooling coils with mechanically-
bonded fins provide peak heat
transfer
40RM007S-012S · Standard factory-installed thermo
40RMS008S-012S static expansion valves(TXVs) on
40RM units
· Standard sloped drain pans

· 1" WASHABLE filters having frontal
access to remove them
· Easy installation and maintenance;
removal of one side panel allows
access to serviceable components;
external piping connections
The 40RM Seriesis your best choice
for packagedair handlers. Model 40RM
units have direct- expansion coils and
model 40RMS units have chilled water
coils. All models offer excellent fan
performance, a unique combination of
indoor air quality features, easy install
ation, and affordable prices. Their vers
atility and state-of-the-art featureswill
provide economical performance now
and in the future.
40RM014S-034S
40RMS014S-034S
40RM-04PD 2008
Indoor air quality features: Quick installation is ensuredby the Smaller unit size shave spider-type
The unique combination of features multiposition design. Units can be bearings.
in the 40RM Series air handlers en installed in either the horizontal or
vertical (upflow) configuration without Coil flexibility
suresthat clean, fresh, conditioned air Model 40RM (direct- expansion coils)
is deliveredto the occupied space. modifications. All units have drain-

pan connections on both sides,and and 40RMS (chilled water coils) have
Cooling coils prevent the build-up pans can be pitched for right- or left- galvanized steel casings; inlet and
of humidity in the room, even during hand operation with a simple ad outlet connections are external & on
part-load conditions. Unit sizes of justment. Fan motors and contactors the same end.
10 tons and above feature dual-circuit are prewired and TXVs are factory Chilled water coils have 1/2 in.
face-split coils. installed on 40RM models. (12.7 mm) diameter copper tubes me
1 inch (25.4 mm) WASHABLE chanically bonded to aluminum sine-
air filters remove dust and airborne High efficiency, precision- balanced wave fins. All coils have non-ferrous
particles from the occupied space. headers.
fans minimize air turbulence, surging
Standard double skin units provide and unbalanced operation, thereby Direct expansion (DX) coils are
an excellent resistance from the cutting operating expenses. designed for use with Refrigerant 22
air-borne particles off the insulation and have copper tubes mechani
thus maintaining an excellent indoor Economizer accessory precisely cally bonded to aluminum sine-wave
air quality (IAQ). controls the blend of outdoor air and fins. Direct-expansion coils include
room air to achieve comfort levels. matched, factory-installed thermostatic
40RM/RMS
Pitched drain pan can be adjusted When the outside air enthalpy is suit expansion valves(TXVs) with matching
for a right- or left-hand connection to able, outside air dampers can fully distributor nozzles.
provide positive drainage and prevent open to provide ``free'' cooling.
standing condensate. Easier installation and service:
Rugged dependability
The multi-position design and com
Accessory economizer can provide ponent layout help you to get the unit
ventilation air to improve indoor air Polyester powder painted (zinc coated)
installed and running quickly. The DX

quality. When used with CO2 sensors, panels provide excellent resistance to
coils have factory-installedTXVs with

the economizer admits fresh outdoor corrosion and also protect the colour
in the areas where ultra-violet (UV)

matching distributor nozzles.Units can
air to replace stale, recirculated be converted from horizontal to verti
indoor air. radiation factor is high.
cal operation by simply reposition

Mechanically bonded coil fins pro ing the unit. Drain pan connections
Economy vide improved heat transfer. are duplicated on both sidesof the
The 40RM Series packaged air Galvanized steel fan housings are unit. The filters, motor, drive, TXVs,
handlers have low initial costs, and securely mounted to a die-formed and coil connections are easily accessed
galvanized steel deck. by removing a single side panels.
they continue to savemoney by pro
viding reducedinstallation expense Rugged pillow-block bearings
and energy-efficient performance. (014-034 sizes) are securely fas
tened to the solid steel fan shaft with
split collets and clamp locking devices.
Table of contents
Page
Features/Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 2
Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PhysicalData . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Options and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-20
Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21,22
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-39
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-46
Typical Piping and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-50
Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-59
Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60,61
2
Model number nomenclature
4 0 R M - 0 1 6 S D B 5 0 1 E D
40RM Commercial Packaged Factory-Installed Options

Air Handler
Cooling Coil ED Painted, Standard Motor and

- Direct Expansion Standard Drive
S Chilled Water
Nominal Capacity Tons (kW) FD Painted, Standard Motor and

007 6 (21) 016 15 (52) Medium-Static Drive (Not available
008 7-1/2 (26) 024 20 (70) for 028 size for 60 Hz units and
010 8-1/2 (29) 028 25 (87) 016-028 for 50 Hz units)
012 10 (35) 034 30 (105)
014 12-1/2 (43)
S: SAMCO
D: Double Skin
RD Painted, Alternate Motor and
Expansion Device
Medium-Static Drive (Available for
- None (40RMS)
50 Hz sizes 016,024,028 and
40RM/RMS
B Thermostatic Expansion Valves (40RM )
60 Hz size 028 only)
Voltage Designation (V-Ph-Hz)
3 208/230-1-60 (007-010 sizes only) WD Painted, Alternate Motor and

5 208/230-3-60 High-Static Drive
6 208/230/460-3-60 (all sizes 007-014; size 016
except YC and WD options)
460-3-60 (sizes 016 with YC or WD options and

Packaging
all size 024-034 units)
1 Standard Domestic
8 230-3-50 3 Export
9 400-3-50
Revision Number
0 Original Model
²YC and WD option codes for all 034 size units and 008, 010 units with 208/230-1-60 power designate
standard motor and high-static drive.
NOTE: See the following table for the sizes available for each unit.
UNIT SIZE AVAILABILITY

UNIT 007 008 010 012 014 016 024 028 034
40RM X X X X X X X X
40RMS X X X X X X X X
Quality Assurance
3
Physical data
40RM - ENGLISH
UNIT 40RM 007SD 008SD 012SD 014SD 016SD 024SD 028SD 034SD
NOMINAL CAPACITY (Tons) 6
71/2 10
121/2 15
20
25
30
OPERATING WEIGHT (lb)
Base Unit (Double skin) with TXV

448
452
472
804
819
824
1188
1198
Plenum 97
97
97
140
140
140
180
180
FANS
Qty...Diam. (in.)
1...15
1...15
1...15
2...15
2...15
2...15
2...18
2...18
Nominal Airflow (cfm) 2400

3000
4000
5000
6000
8000
10,000 12,000
Airflow Range (cfm) 1800-3000
2250-3750
3000-5000
3750-6250
4500-7500
6000-10,000 7500-12,500 9000-15,000
Nominal Motor Hp (Standard Motor)*
208/230-1-60
1.3 2.4 - - - - - -
208/230-3-60 and 460-3-60 2.4 2.4 2.4 2.9 3.7 5.0 7.5 10.0
575-3-60 1.0 2.0 2.0 3.0 3.0 5.0 7.5 10.0
230-3-50, 400-3-50 2.4 2.4 2.9 2.9 2.9 5.0 7.5 10.0
Motor Speed (rpm)
208/230-1-60
1725
1725
- - - - - -
208/230-3-60 and 460-3-60 1725
1725
1725
1725
1725
1745
1745
1745
575-3-60 1725
1725
1725
1725
1725
1745
1755
1755
230-3-50, 400-3-50 1425
REFRIGERANT R-22
Operating charge (lb)

3.0 3.0 1.5/1.5 2.0/2.0 2.5/2.5 3.5/3.5 4.5/4.5 5.0/5.0
(approx per circuit)²
DIRECT-EXPANSION COIL
Enhanced Copper Tubes, Aluminum Sine-Wave Fins
40RM/RMS
Max Working Pressure (psig) 435
Face Area (sq ft) 6.67 8.33 10.0 13.25 17.67 19.88 24.86 29.83
No. of Splits 1
1
2
2
2
2
2
2
Split Type...Percentage - - Face...50/50

No. of Circuits per Split 12
15
9
9
12
13
15
18
Rows...Fins/in. 3...15
3...15
3...17
3...15
3...15
3...17
3...15
3...15
STEAM COIL**
Max Working Pressure (psig at 400 F)

175
Total Face Area (sq ft) 6.67 6.67 6.67 13.33 13.33 13.33 15.0 15.0
1...9
1...9
1...10
1...10
1...10
1...10
1...10
HOT WATER COIL**
Max Working Pressure (psig)

150
Rows...Fins/in. 2...8.5
2...8.5
2...8.5
2...8.5
2...8.5
2...8.5
2...12.5
2...12.5
Water Volume
(gal)
8.3 13.9 14.3
(ft3) 1.1 1.85 1.90
PIPING CONNECTIONS
Quantity...Size (in.)
DX Coil - Suction (ODF)

1...11/8 1...11/8 2...11/8 2...11/8 2...11/8 2...11/8 2...13/8 2...13/8
DX Coil - Liquid Refrigerant (ODF) 1...5/8 2...5/8
Steam Coil, In (MPT) 1...21/2 1...21/2
Steam Coil, Out (MPT) 1...11/2 1...11/2
Hot Water Coil, In (MPT) 1...11/2 1...11/2 1...2
Hot Water Coil, Out (MPT) 1...11/2 1...11/2 1...2
Condensate (PVC) 1...1 ODM/1 IDF

1/4
FILTERS Washable - Factory Supplied

4...16 x 20 x 1 4...20 x 24 x 1
Quantity...Size (in.) 4...16 x 24 x 1
4...16 x 24 x 1 4...20 x 25 x 1
Access Location Front
LEGEND
DX - Direct Expansion
TXV - Thermostatic Expansion Valve
*Refer to alternate Fan Motor Data table, pages 52 and 53, for alternate motor data.
²Units are shipped without refrigerant charge.
**Please contact your local Carrier sales office for availability.
Please contact your local Carrier sales office for the weights of single skin units.
4
40RM - SI
UNIT 40RM 007SD 008SD 012SD 014SD 016SD 024SD 028SD 034SD
NOMINAL CAPACITY (kW) 21 26 35 43 52 70 87 105
OPERATING WEIGHT (kg)
Base Unit (Double skin) with TXV 203 205 214 364 371 373 538 542
Plenum 44 44 44 63 63 63 82 82
FANS
Qty...Diam. (mm) 1...381 1...381 1...381 2...381 2...381 2...381 2...457 2...457
Nominal Airflow (L/s) 1133 1604 1888 2360 2831 3775 4719 5663
Airflow Range (L/s) 850-1416 1203-2006 1416-2360 1770-2949 2124-3539 2831-4719 3539-5899 4247-7079
Nominal Motor kW (Standard Motor)*
208/230-1-60
0.97 1.79 - - - - - - -
208/230-3-60 and 460-3-60 1.79 1.79 1.79 2.16 2.76 3.73 5.59 7.46
575-3-60 0.75 1.49 1.49 2.24 2.24 3.73 5.59 7.46
230-3-50, 400-3-50 1.79 1.79 2.16 2.16 2.16 3.73 5.59 7.46
Motor Speed (r/s)
208/230-1-60
28.8 28.8 - - - - - - -
208/230-3-60 and 460-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.1 29.1
575-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.3 29.3
230-3-50, 400-3-50 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8
REFRIGERANT R-22
Operating charge (kg)
1.36 1.36 0.68/0.68 0.90/0.90 1.13/1.13 1.59/1.59 2.04/2.04 2.27/2.27
(approx per circuit)²
DIRECT-EXPANSION COIL Enhanced Copper Tubes, Aluminum Sine-Wave Fins
40RM/RMS
Max Working Pressure (kPag) 2999
Face Area (sq m) 0.62 0.77 0.93 0.93 1.64 1.85 2.30 2.77
No. of Splits 1 1 2 2 2 2 2 2
No. of Circuits per Split 12 15 9 9 12 13 15 18
Split Type...Percentage - - Face...50/50
Rows...Fins/m 3...591 3...591 3...670 3...591 3...591 3...670 3...591 3...591
STEAM COIL***
Max Working Pressure (kPag at 204.4 C) 1207
Total Face Area (sq m) 0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39
Rows...Fins/m 1...355 1...355 1...355 1...394 1...394 1...394 1...394 1...394
HOT WATER COIL***
Max Working Pressure (kPag) 1034
Total Face Area (sq m) 0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39
Rows...Fins/m 2...335 2...335 2...335 2...335 2...335 2...335 2...493 2...493
Water Volume
(L) 31.4 52.6 54.1
(m3) 0.031 0.052 0.054
PIPING CONNECTIONS**
DX Coil - Suction (ODF) 1...11/8 1...11/8 2...11/8 2...11/8 2...11/8 2...11/8 2...13/8 2...13/8
DX Coil - Liquid Refrigerant (ODF) 1...5/8 2...5/8
Steam Coil, In (MPT) 1...21/2 1...21/2
1/4

4...406 x 508 x 25.4 4...508 x 610 x 25.4
Quantity...Size 4...406 x 610 x 25.4
4...406 x 610 x 25.4 4...508 x 635 x 25.4
LEGEND
DX - Direct Expansion
TXV - Thermostatic Expansion Valve
*Refer to Alternate Fan Motor Data table, pages 56 and 57, for alternate motor data.
²Units are shipped without refrigerant charge.
**All piping sizes are OD inches; equivalent sizes in millimeters follow:
***Please contact your local Carrier sales office for availability.
in. mm
5/8 15.9
1 25.4
11/8 28.6
11/4 31.8
13/8 34.9
11/2 38.1
2 50.8
21/8 54.0
21/2 63.5
5
Physical data (cont)
40RMS - ENGLISH
UNIT 40RMS 008SD 010SD 012SD 014SD 016SD 024SD 028SD 034SD
NOMINAL CAPACITY (Tons) 71/2 81/2 10
121/2 15
20
25
30
OPERATING WEIGHT (lb)
Base Unit (Double skin)

457
458
458
795
811
817
1203
1210
Plenum 97
97
97
140
140
140
180
180
FANS
Qty...Diam. (in.)
1...15
1...15
1...15
2...15
2...15
2...15
2...18
2...18
Nominal Airflow (cfm) 3000

3400
4000
5000
6000
8000
10,000 12,000
Airflow Range (cfm) 2250-3750
2250-4250
3000-5000
3750-6250
4500-7500
6000-10,000 7500-12,500 9000-15,000
Nominal Motor Hp
(Standard Motor)*
208/230-1-60
2.4 2.4 - - - - - -
208/230-3-60 and 460-3-60 2.4 2.4 2.4 2.9 3.7 5.0 7.5 10.0
575-3-60 2.0 2.0 2.0 3.0 3.0 5.0 7.5 10.0
230-3-50, 400-3-50 2.4 2.4 2.9 2.9 2.9 5.0 7.5 10.0
Motor Speed (rpm)
208/230-1-60
1725
1725
- - - - - -
208/230-3-60 and 460-3-60 1725
1725
1725
1725
1725
1745
1745
1745
575-3-60 1725
1725
1725
1725
1725
1745
1755
1755
230-3-50, 400-3-50 1425
CHILLED WATER COIL Enhanced Copper Tubes, Aluminum Sine-Wave Fins

Max Working Pressure (psig) 435
Face Area (sq ft) - Upper 8.3 9.0 9.8 8.3 8.3 11.0 12.4 15.5
40RM/RMS
Face Area (sq ft) - Lower - - - 5.5 8.3 8.3 12.4 12.4
Water Volume
(gal)
3.0 3.3 3.5 4.7 5.6 6.4 8.9 9.9
(ft3) 0.40 0.47 0.46 0.63 0.75 0.85 1.19 1.32
STEAM COIL**
Max Working Pressure
175
(psig at 400 F)
Total Face Area (sq ft)

6.67 6.67 6.67 13.33 13.33 13.33 15.0 15.0
1...9
1...9
1...10
1...10
1...10
1...10
1...10
HOT WATER COIL**
Max Working Pressure (in. wg)

150
Rows...Fins/in. 2...8.5
2...8.5
2...8.5
2...8.5
2...8.5
2...8.5
2...12.5
2...12.5
Water Volume
(gal)
8.3 13.9 14.3
(ft3) 1.1 1.85 1.90
PIPING CONNECTIONS
Chilled Water - In
1...13/8 ODF 1...13/8 ODF 1...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Chilled Water - Out 1...13/8 ODF 1...13/8 ODF 1...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Steam Coil, In (MPT) 1...21/2 1...21/2

1/4

Quantity...Size (in.) 4...16 x 24 x 1
4...16 x 20 x 1 4...20 x 24 x 1
4...16 x 24 x 1 4...20 x 25 x 1
*Refer to the Alternate Fan Motor Data table, pages 52 and 53, for alternate motor data.
6
40RMS - SI
UNIT 40RMS 008SD 010SD 012SD 014SD 016SD 024SD 028SD 034SD
NOMINAL CAPACITY (kW) 26 29 35 43 52 70 87 105
OPERATING WEIGHT (kg)
Base Unit (Double skin) 207 207 207 360 367 370 544 548
Plenum 44 44 44 63 63 63 82 82
FANS
Qty...Diam. (mm) 1...381 1...381 1...381 2...381 2...381 2...381 2...457 2...457
Nominal Airflow (L/s) 1416 1605 1888 2360 2831 3775 4719 5663
1062 1204 1416 1770 2124 2831 3539 4247
Airflow Range (L/s)
1770 2006 2360 2949 3539 4719 5899 7079
Nominal Motor kW
(Standard Motor)*
208/230-1-60
1.79 1.79 - - - - - - -
208/230-3-60, 460-3-60 1.79 1.79 1.79 1.79 2.76 3.73 5.59 7.46
575-3-60 1.49 1.49 1.49 1.49 2.24 3.73 5.59 7.46
230-3-50, 400-3-50 1.79 1.79 2.16 2.16 2.16 3.73 5.59 7.46
Motor Speed (r/s)
208/230-1-60
28.8 28.8 - - - - - - -
208/230-3-60, 460-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.1 29.1
575-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.3 29.3
230-3-50, 400-3-50 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8
CHILLED WATER COIL
2999
40RM/RMS
(kPag)
Face Area (sq m) - Upper

0.77 0.84 0.91 0.77 0.77 1.02 1.15 1.44
Face Area (sq m) - Lower - - - 0.51 0.77 0.77 1.15 1.15
Rows...Fins/m 3...591 3...591 3...591 3...591 3...591 3...591 3...591 3...591
Water Volume
(L) 11.4 12.5 13.2 17.8 21.2 24.2 33.7 37.5
(M3) 0.011 0.013 0.013 0.018 0.021 0.024 0.032 0.037
STEAM COIL**
1207
(kPag at 204.4 C)
Total Face Area (sq m)

0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39
Rows...Fins/m 1...355 1...355 1...355 1...355 1...394 1...394 1...394 1...394
HOT WATER COIL**
1034
(kPag)
Total Face Area (sq m)

0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39
Rows...Fins/m 2...335 2...335 2...335 2...335 2...335 2...335 2...493 2...493
Water Volume
(L) 31.4 52.6 54.1
(m3) 0.031 0.052 0.054
PIPING CONNECTIONS²
Chilled Water - In 1...13/8 ODF 1...13/8 ODF 2...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Chilled Water - Out 1...13/8 ODF 1...13/8 ODF 2...13/8 ODF 2...13/8 ODM 2...13/8 ODM 2...13/8 ODM 2...21/8 ODM 2...21/8 ODM
Steam Coil, In (MPT) 1...21/2 1...21/2
1/4

4...406 x 508 x 25.4 4...508 x 610 x 25.4
Quantity...Size (mm) 4...406 x 610 x 25.4
4...406 x 610 x 25.4 4...508 x 635 x 25.4
*Refer to the Alternate Fan Motor Data table, pages 52 and 53, for alternate motor data.
²All piping sizes are OD inches; equivalent sizes in millimeters follow:
in. mm
5/8 15.9
1 25.4
11/8 28.6
11/4 31.8
13/8 34.9
11/2 38.1
2 50.8
21/8 54.0
21/2 63.5
7
Options and accessories
Factory-installed options
Return-air grille provides a protective barrier over the
Alternate fan motors and drives are available to pro
return-air opening and givesa finished appearanceto units
vide the widest possiblerange of performance.
installed in the occupied space. Accessory is availableun
painted or painted.
Field-installed accessories
Subbase provides a stable, raised platform and room for
Two-row hot water coils have copper tubes mechani
condensatedrain trap connection for verticalfloor-mounted
cally bonded to aluminum plate fins and non-ferrous
units. Accessoryis availableunpainted or painted.
headers.
Over head suspension package includes necessary brack
One-row steam coil has copper tubes and aluminum fins.
ets to support units in horizontal ceiling installations.
The Inner Distributing Tube (IDT) design provides uniform
CO 2 sensors can be used in conjunction with the econ
temperaturesacrossthecoil face.The steam coil hasa broad
omizer accessoryto help meet indoor air quality require
operating pressure range; up to 175 psig (1207 kPag) at
ments. The sensor signals the economizer to open when
400 F (204.4 C) and up to 300 psig (2069 kPag)at 300 F
the CO2 level in the spaceexceedsthe set point. A Carrier
(148.9 C). The IDT steam coils are especiallysuited to ap Comfort Systemprogrammable thermostat can be usedto
plications where sub-freezingair enters the unit. override the sensorif the outsideair temperature is too high
Electric r esistance heat coils have an open-wire design or too low.
and are mounted in a rigid frame. Safety cutouts for high Carrier's line of ther mostats provide both program
temperature conditions are standard. Terminal block for mable and non-programmable capability with the new
single-point power connection is included. Debonair line of commercial programmable thermostats,
40RM/RMS
Economizer (enthalpy contr olled) provides ventilation the TEMP System controls offer communication capabil
air and ``free'' cooling if outside ambient temperature and ity with stagedheating and cooling, the Commercial Elec
humidity are suitable. Can also be used with CO2 sensors tronic thermostats provide 7-day programmable capability
to help meet indoor air quality requirements. for economicalapplications,while the Non-Programmable
thermostatsoffer a multitude of stagedheating and cooling
Discharge plenum directs the air discharge directly into subbaseoptions.
the occupied space; integral horizontal and vertical louvers
enable redirection of airflow. Accessory is available un Condensate drain trap includesan overflow shutoff switch
painted or painted. Field assemblyrequired. that can be wired to turn off the unit if the trap becomes
plugged. Kit also includesa wire harnessthat can be con
nected to an alarm if desired. The transparent trap is de
Standard units available from the factory are in signed for easy serviceand maintenance.
Double skin.
8
CARRIER THERMOSTATS
DEBONAIR COMMERCIAL PROGRAMMABLE COMMERCIAL ELECTRONIC
THERMOSTAT THERMOSTAT
Carrier
®
Pm
COOL
AUTO
HEAT
40RM/RMS
TEMP SYSTEM THERMOSTAT NON-PROGRAMMABLE THERMOSTAT
H C
9
Options and accessories (cont)
40RM WITH DISCHARGE PLENUM, 40RM WITH HOT WATER OR STEAM COIL
RETURN-AIR GRILLE AND SUBBASE HOT WATER OR
STEAM COIL
DISCHARGE
PLENUM
RETURN-AIR
40RM/RMS
GRILLE
SUBBASE
FAN
COIL
UNIT FAN COIL
UNIT
40RM WITH ECONOMIZER 40RM WITH CONDENSATE TRAP
ECONOMIZER
10
Dimensions
40RM007SD-012SD
40RMS008SD-012SD UNIT WEIGHT
UNIT
lb (kg)
40RM007SD 448 (203)
40RM008SD 452 (205)
40RM012SD 472 (214)
40RMS008SD 457 (207)
40RMS010SD 458 (207)
40RMS012SD 458 (207)
All the above mentioned weights

are for double skin units.
TXV - Thermostatic Expansion

40RM/RMS
Valve
NOTES:
1. Dimensions in [ ] are in
millimeters.
2. Direction of air¯ow .
3. Recommended clearance:
· Rear: 39(76.2 mm) (28-69[762 mm]
with electric heat accessory)
· Front: 28-69 (762 mm)
· Right side: 28-69 (762 mm)
· Left Side: 28-69 (762 mm)
· Local codes or jurisdiction may
prevail.
4. Liquid piping not supplied by
Carrier.
5. Duct flange is factory supplied and
field installed.
11
Dimensions (cont)
40RM014SD-024SD
40RMS014SD-024SD
40RM/RMS

Valve
NOTES:
millimeters.
2. Direction of airflow.
UNIT · Rear: 39 (76.2 mm) (28-69
[762 mm] with electric heat
accessory)
· Front: 28-69 (762 mm)
· Right side: 28-69 (762 mm)
· Left Side: 28-69 (762 mm)
prevail.
Carrier.
5. Duct flange is factory supplied
and field installed.
UNITWEIGHT
UNIT lb (kg)
40RM014SD 804 (364)
40RM016SD 819 (371)
40RM024SD 824 (373)
All the weights men 40RMS014SD 795 (360)
tioned in the table 40RMS016SD 811 (367)
are for double skin 40RMS024SD 817 (370)
units.
12
40RM028SD,034SD
40RMS028SD,034SD
40RM/RMS

Valve
NOTES:
millimeters.
2. Direction of airflow.
· Rear: 39 (76.2 mm)
· Front: 28-69 (762 mm)
· Right side: 28-69 (762 mm)
· Left Side: 28-69 (762 mm)
prevail.
Carrier.
5. Duct flange is factory supplied
and field installed.
UNIT UNIT WEIGHT

lb (kg)
40RM028SD 1188 (538)
40RM034SD 1198 (542)
40RMS028SD 1203 (544)
40RMS034SD 1210 (548)
All the above mentioned weights are for
double skin units.
13
Dimensions (cont)
OVERHEAD SUSPENSION ACCESSORY
UNIT SIZES 007-012

40RM/RMS
UNIT SIZES 014-024
UNIT SIZES 028,034
NOTE: Dimensions in [ ] are millimeters.
14
PLENUM, RETURN-AIR GRILLE, AND SUBBASE ACCESSORIES
UNIT SIZES 007-012
40RM/RMS
UNIT SIZES 014-024
15
Dimensions (cont)
PLENUM, RETURN-AIR GRILLE, AND SUBBASE ACCESSORIES (cont)

UNIT SIZES 028,034
40RM/RMS
16
HOT WATER AND STEAM COIL ACCESSORIES
UNIT SIZES 007-012
40RM/RMS
DIMENSION HOT WATER COIL STEAM COIL
A 11⁄2� MPT [38.1] 11⁄2� MPT [38.1]
B 11⁄2� MPT [38.1] 21⁄2� MPT [63.5]
C 23⁄8� [60.3] 31⁄8� [79.4]
D 47⁄8� [123.8] 31⁄8� [79.4]
E 21⁄8� [54.0] 49⁄16� [115.8]
F 1�-111⁄4� [590.6] 1�-9� [584.2]
G 3�- 4� [1016.0] 3�-4� [1016.0]
UNIT SIZES 014-024

A 2� MPT [50.8] 11⁄2� MPT [38.1]
B 2� MPT [50.8] 21⁄2� MPT [63.5]
C 23⁄8� [60.3] 31⁄8� [79.4]
D 47⁄8� [123.8] 31⁄8� [79.4]
E 21⁄8� [54.0] 49⁄16� [115.8]
F 1�-111⁄4� [590.6] 1�-9� [584.2]
G 6�- 8� [2032.0] 6�-8� [2032.0]
NOTE : Dimensions in [ ] are millimeters.
17
Dimensions (cont)
HOT WATER AND STEAM COIL ACCESSORIES (cont)

UNIT SIZES 028,034
40RM/RMS

A 2� MPT [50.8] 11⁄2� MPT [38.1]
B 2� MPT [50.8] 21⁄2� MPT [63.5]
C 23⁄8� [60.3] 31⁄8� [79.4]
D 47⁄8� [123.8] 31⁄8� [79.4]
E 21⁄8� [54.0] 49⁄16� [115.8]
F 1�-111⁄4� [590.6] 1�-9� [584.2]
G 7�- 6� [2286.0] 7�-6� [2286.0]
18
ECONOMIZER ACCESSORY
UNIT SIZES 007-012
40RM/RMS
UNIT SIZES 014-024
UNIT SIZES 028,034
NOTES:
1. For horizontal unit applications, economizer can be attached to end of unit opposite duct connections.
2. Dimensions in [ ] are millimeters.
19
Dimensions (cont)
ELECTRIC HEAT ACCESSORY
UNIT SIZES 007-012
40RM/RMS
UNIT SIZES 014-034
UNIT SIZE A B C D E F G H J
014-024 1�-31⁄4� 4�-63⁄8� 25⁄16� 2�-11⁄4� 105⁄8� 1�-4� 1�-45⁄16� 1�-63⁄4� 1�-7⁄8�
[387.4] [1381.1] [58.7] [641.4] [269.9] [406.4] [414.3] [476.3] [327.0]
1�-33⁄8� 5�-47⁄16� 21⁄16� 2�-63⁄16� 1�-1⁄4� 1�-7� 1�-45⁄16� 1�-10� 1�-47⁄16�
028,034
[390.5] [1636.8] [26.9] [766.8] [311.2] [482.6] [414.0] [558.8] [417.1]
20
Selection procedure (with example)
— English (60 Hz)

Cooling (DX) Fan
I Determine the cooling load and temperature and I Determine fan speed and brake horsepower:
quantity of air entering the evaporator. From the Accessory Pressure Drop table, read a loss
Given: of 0.23 in. wg for a hot water coil at 6000 cfm.
Total Capacity . . . . . . . . . . . . . . . . . . . . 200,000 Btuh External static pressure = 0.80 + 0.23
Sensible Heat Capacity . . . . . . . . . . . . . 130,000 Btuh = 1.03 in. wg
Air Temperature Entering Indoor Enter 40RM016 Fan Performance table at 6000 cfm
Coil . . . . . . . . . . . . . . . . . . . . . . . . 80 F db, 67 F wb
and 1.03 in. wg. Interpolate and determine fan speed
of 866 rpm and 2.7 bhp.
Air Quantity Entering Indoor Coil . . . . . . . 6000 cfm
II Determine motor and drive.

Ductwork Static Pressure Loss . . . . . . . . . . 0.8 in. wg
Enter the fan motor data tables on page 52, and find
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . 230-3-60
that the 230 v standard motor for a 40RM016 unit is

II Determine unit selection and coil refrigerant rated at 3.7 Hp. Since the bhp required is 2.7, a stand
temperature. ard motor satisfies the requirement and should be used.
Enter the Cooling Capacities table at 6000 cfm. Se Next, find the type of drive that satisfies the 866 rpm
lect a 40RM016 unit which has a total capacity of requirement in the Drive Data tables on pages 54-59 .
207,000 and 174,000 Btuh at 40 and 45 F coil re For a 40RM016 unit, the Medium-Static Drive table
40RM/RMS
frigerant temperature, respectively. By interpolation, on page 54 shows an rpm range of 742 to 943. Since
coil refrigerant temperature of 41.1 F is needed to give the rpm required is 866, the medium-static drive sat
a total capacity of 200,000 Btuh. Sensible capacity is isfies the requirement and should be used. Select the
approximately 149,000 Btuh. Cooling load is standard motor and medium-static drive combination
satisfied. (option code HC or FD).
Heating (Hot Water Coil) To select an outdoor unit for this 40RM016 indoor
section, refer to the Combination Rating sheets for
I Determine heating load and temperature of air Carrier condensing units in the condensing unit Prod
entering the indoor coil. uct Data Digest, or consult the Carrier Electronic
Given: Catalog.
Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425,000 Btuh Cooling (Chilled Water)
Entering-Air Temperature . . . . . . . . . . . . . . . . . . . 70 F NOTE: Chilled water coils (40RMS) can be selected by us
Coils. . . . . . . . . . . . . . . . . . . . . . . . . . 2-Row Hot Water ing Carrier’s Electronic Catalog software program.
Coil Entering-Water Temperature . . . . . . . . . . . 200 F
Water Temperature Drop . . . . . . . . . . . . . . . . . . . 20 F
II Find the heating capacity.
Enter Hydronic Heating Capacities table for the
40RM016 unit at 6000 cfm. A 2-row hot water coil
delivers 471,000 Btuh (based on 60 F entering air
temperature and 20 F water temperature drop). Since
existing entering air temperature is 70 F, enter the
Heating Correction Factors table for hot water coils at
200 F entering water temperature, 20 F water tem
perature drop and 70 F entering air. Read a constant
of 0.93.
471,000 x 0.93 = 438,000
The 438,000 Btuh rating satisfies the heating load.
21
Selection procedure (with example)
— SI (50 Hz)
Cooling (DX) Fan
I Determine the cooling load and temperature and I Determine fan speed and brake horsepower.
quantity of air entering the evaporator. From the Accessory Pressure Drop table, read a loss
Given: of 93 Pa for a hot water coil at 1900 L/s.
Total Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 37 kW External static pressure = 200 + 93
Sensible Heat Capacity . . . . . . . . . . . . . . . . . . . 29 kW = 293 Pa
Air Temp Entering
Indoor Coil . . . . . . . . . . . . . . . . . 26.7 C db, 19 C wb Enter 40RM012 Fan Performance table at 1900 L/s
Air Quantity Entering Indoor Coil . . . . . . . 1900 L/s and 293 Pa. Interpolate and determine fan speed of
15.79 r/s and 1.41 kW.
Ductwork Static Pressure Loss . . . . . . . . . . . . 200 Pa
II Determine unit selection and coil refrigerant II Determine motor and drive.
temperature. Enter the Fan Motor Data tables on page 52, and find
Enter the Cooling Capacities table at 1900 L/s. that the standard motor for a 40RM012 unit is rated
at 2.16 kW. Since the kW required is 1.41, a standard
Select a 40RM012 unit which has a total capacity of
37.35 kW at 6 C coil refrigerant temperature. Sensible motor satisfies the requirement and should be used.
capacity is 29.61 kW. Cooling load is satisfied. Next, find the type of drive that satisfies the 15.79 r/s
requirement in the Drive Data tables on page 54-59 .
Heating (Hot Water Coil) For a 40RM012 unit, the Medium-Static Drive table
40RM/RMS
I Determine heating load and temperature of air on page 59shows an r/s range of 13.5 to 17.4. Since
entering the indoor coil. the r/s required is 15.79, the medium-static drive sat
Given:
isfies the requirement and should be used. Select the
Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 kW
standard motor and medium-static drive combination
Entering-Air Temperature . . . . . . . . . . . . . . . . 15.6 C
(option code HC or FD).
Coils . . . . . . . . . . . . . . . . . . . . . . . . . 2-Row Hot Water
To select an outdoor unit for this 40RM012 indoor
Coil Entering-Water Temperature . . . . . . . . . . 93.3 C
section, refer to the Combination Rating sheets for Car
Water Temperature Drop . . . . . . . . . . . . . . . . . 11.1 C
rier condensing units in the condensing unit Product
II Find the heating capacity. Data Digest, or consult the latest Carrier Electronic
Enter Hydronic Heating Capacities table for the Catalog.
40RM012 unit at 1900 L/s. A 2-row hot water coil Cooling (Chilled Water)
delivers 90 kW (based on 15.6 C entering air tempera NOTE: Select chilled water coils (40RMS) by using Carrier’s
ture and 11.1 C water temperature drop). Electronic Catalog software program.
The 90 kW rating satisfies the heating load.
22
Performance data
40RM COOLING CAPACITIES — ENGLISH
EVAPORATOR COIL REFRIGERANT TEMP (F)

AIR
UNIT
40RM Airflow Ewb 30 35 40 45 50
(Cfm)
BF (F) TC SHC TC SHC TC SHC TC SHC TC SHC
72 116 55 104 50 93 46 79 40 64 35
1,800 67 96 61 85 56 74 50 61 45 47 40
0.06
62 80 66 69 61 57 55 46 46 39 39
72 135 65 121 60 108 54 92 48 75 42
007 2,400 67 112 73 99 68 86 62 71 56 55 49
0.10
62 94 81 81 75 67 67 56 56 47 47
72 150 73 135 68 120 62 102 56 83 49
3,000 67 125 85 112 78 96 71 80 65 61 57
0.12
62 105 95 90 86 75 75 64 64 54 54
72 144 69 130 63 116 57 99 50 80 43
2,250 67 120 76 106 70 92 63 76 56 59 50
0.06
62 100 83 87 76 71 69 57 57 49 49
72 169 81 151 75 135 68 114 61 94 53
3,000
008 0.10 67 140 92 124 85 108 77 89 69 69 62
62 118 101 102 94 84 84 70 70 59 59
40RM/RMS
72 187 92 168 85 150 78 127 70 104 61
3,750 67 157 106 140 97 120 89 100 81 77 72
0.12
62 132 118 112 108 94 94 80 80 68 68
72 193 92 174 81 154 76 132 67 108 58
3,000
0.05 67 161 102 143 93 123 85 102 76 79 67
62 134 111 116 102 96 93 78 78 66 66
72 223 108 201 99 179 91 153 81 125 71
012 4,000 67 186 122 166 113 143 104 119 93 92 82
0.07
62 157 136 136 126 113 113 95 95 80 80
72 246 122 222 112 198 103 169 93 138 81
5,000 67 207 140 185 131 159 120 132 109 102 97
0.12
62 175 159 149 145 126 126 109 109 92 92
72 223 107 204 99 183 91 157 81 127 70
3,750 67 188 121 169 112 144 102 118 90 94 81
0.06
62 154 133 136 123 114 111 94 94 80 80
72 259 126 234 117 210 108 180 97 145 85
5,000
014 0.08 67 220 146 194 136 166 124 138 112 110 100
62 178 163 156 150 134 134 114 114 97 97
72 284 142 257 132 230 122 198 111 160 98
6,250
0.10 67 242 166 209 154 183 145 153 131 119 117
62 197 188 172 172 150 150 130 130 111 111
72 282 134 254 123 228 112 194 100 162 89
4,500 67 233 149 209 138 178 125 149 112 117 99
0.03
62 192 163 169 151 141 138 116 116 98 98
72 320 156 293 145 263 134 223 119 179 104
016 6,000 67 276 181 243 167 207 153 174 137 137 123
0.05
62 225 200 198 185 167 167 140 140 119 119
72 358 177 319 163 290 152 248 137 197 120
7,500 67 305 208 263 192 229 178 193 160 153 144
0.08
62 251 232 218 215 188 188 161 161 136 136
72 365 174 330 161 296 147 254 131 206 114
6,000 67 309 198 274 182 234 166 195 150 153 132
0.03
62 250 216 221 200 186 182 155 155 132 132
72 416 203 378 189 338 174 291 157 235 138
024 8,000 67 354 237 305 217 269 202 224 183 179 163
0.06
62 290 264 253 245 218 218 187 187 159 159
72 454 228 413 213 373 198 319 179 259 160
10,000 67 376 266 338 251 296 235 250 214 194 189
0.07
62 316 303 279 278 244 244 213 213 182 182
23
Performance data (cont)
40RM COOLING CAPACITIES — ENGLISH (cont)
EVAPORATOR COIL REFRIGERANT TEMP (F)

AIR
UNIT
40RM Airflow Ewb 30 35 40 45 50
(Cfm)
BF (F) TC SHC TC SHC TC SHC TC SHC TC SHC
72 440 211 394 193 361 180 312 162 255 142
7,500 67 374 241 385 225 287 205 235 184 191 166
0.04
62 303 265 270 247 229 226 193 193 165 165
72 498 246 454 229 408 212 354 193 288 170
028 10,000 67 425 288 373 267 327 249 271 226 220 203
0.06
62 350 325 306 302 267 267 232 232 199 199
72 — — 495 258 445 240 385 220 318 198
12,500 67 456 327 408 308 359 289 304 265 239 235
0.08
62 380 375 336 336 299 299 264 264 226 226
72 527 253 473 232 433 216 375 194 306 170
9,000 67 449 290 402 270 345 246 282 221 229 199
0.04
62 364 318 323 297 275 271 232 232 198 198
72 598 295 545 275 490 254 425 232 346 205
12,000
034 0.06 67 510 346 448 321 393 298 326 271 263 244
40RM/RMS
62 420 390 367 362 321 321 279 279 238 238
72 — — 594 309 534 288 462 264 382 237
15,000 67 547 392 490 370 431 347 365 318 287 282
0.08
62 456 450 403 403 359 359 317 317 271 271
LEGEND 6. SHC is based on 80 F db temperature of air entering evaporator coil.

BF — Bypass Factor
Below 80 F db, subtract (corr factor x cfm) from SHC.
db — Dry-Bulb Temp (F)
Above 80 F db, add (corr factor x cfm) to SHC. See italic type
Ewb — Entering Wet-Bulb Temp (F)
below.
lwb — Leaving Wet-Bulb Temp (F)
SHC — Sensible Heat Capacity (1000 Btuh)

ENTERING AIR DRY-BULB TEMP (F)
TC — Total Capacity (1000 Btuh)
BYPASS 79 78 77 76 75 Under 75
NOTES:
FACTOR
1. Direct interpolation is permissible. Do not extrapolate. 81 82 83 84 85 Over 85
2. Evaporator fan heat not deducted from ratings. Correction Factor
3. Ratings based on approximately 15 F superheat leaving coil. 0.02 1.08 2.16 3.23 4.31 5.39
4. Dashes indicate coil loading limits are exceeded. 0.05 1.05 2.09 3.14 4.18 5.23
5. Formulas: 0.10 0.99 1.98 2.97 3.96 4.95
0.15 0.94 1.87 2.81 3.74 4.68 use formula
sensible heat capacity (Btuh)
Leaving db = entering db − 0.20 0.88 1.76 2.64 3.52 4.40 shown below
1.1 x cfm 0.25 0.83 1.65 2.48 3.30 4.13
Leaving wb = wet-bulb temperature corresponding to enthalpy of 0.30 0.77 1.54 2.31 3.08 3.85
air leaving coil (hlwb)
total capacity (Btuh)

Interpolation is permissible.
hlwb = hewb −
4.5 x cfm
Correction Factor = 1.1 x (1 − BF) x (db − 80)
where hewb = enthalpy of air entering coil
24
40RM COOLING CAPACITIES — SI
EVAPORATOR COIL REFRIGERANT TEMP (C)

AIR
UNIT
40RM Airflow Ewb −1 0 2 4 6 8 10
(L/s)
BF (C) TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
22 33.73 16.27 32.43 15.75 29.83 14.69 27.23 13.64 24.62 12.60 22.02 11.57 19.40 10.57
850 19 27.79 18.51 26.56 17.93 24.10 16.78 21.64 15.63 19.17 14.51 16.70 13.41 14.22 12.41
.06
16 22.73 21.09 21.58 20.29 19.27 18.70 16.95 16.95 14.62 14.62 12.28 12.28 9.93 9.93
22 39.24 19.50 37.73 18.87 34.70 17.60 31.68 16.34 28.66 15.09 25.63 13.89 22.60 12.66
007 1150 19 32.37 22.21 30.93 21.58 28.06 20.32 25.18 19.08 22.30 17.86 19.41 16.79 16.51 15.64
.10
16 26.41 25.86 25.15 24.85 22.64 22.64 20.11 20.11 17.58 17.58 15.04 15.04 12.49 12.49
22 43.88 21.85 42.16 21.22 38.71 19.97 35.26 18.72 31.82 17.50 28.37 16.33 24.92 23.63
1450 19 36.69 25.31 35.04 24.63 31.74 23.30 28.44 21.99 25.14 20.73 21.83 19.63 18.52 18.52
.12
16 29.14 29.14 27.82 27.82 25.19 25.19 22.55 22.55 19.91 19.91 17.26 17.26 14.61 14.61
22 42.12 20.58 40.51 19.89 37.29 18.52 34.07 17.16 30.84 15.80 27.61 14.46 24.37 13.18
1000 19 34.64 23.22 33.11 22.48 30.05 21.01 26.97 19.55 23.89 18.12 20.80 16.74 17.71 15.49
.06
16 28.76 26.41 27.26 25.39 24.26 23.38 21.25 21.25 18.22 18.22 15.17 15.17 12.10 12.10
22 49.07 24.22 47.14 23.49 43.29 22.02 39.43 20.56 35.57 19.12 31.71 17.72 27.85 16.48
1400
008 .10 19 40.52 27.88 38.72 27.04 35.13 25.38 31.54 23.74 27.94 22.15 24.33 20.67 20.71 19.62
40RM/RMS
16 33.30 32.38 31.70 31.12 28.48 28.48 25.25 25.25 22.01 22.01 18.76 18.76 15.50 15.50
22 54.60 27.31 52.46 26.52 48.17 24.95 43.89 23.40 39.61 21.87 35.32 20.41 31.04 19.32
1800 19 45.87 31.43 43.80 30.60 39.68 28.96 35.55 27.35 31.42 25.81 27.28 24.47 23.14 23.14
.12
16 36.21 36.21 34.59 34.59 31.35 31.35 28.10 28.10 24.85 24.85 21.59 21.59 18.33 18.33
22 56.46 26.00 54.28 25.26 49.91 23.80 45.53 22.33 41.15 20.89 36.77 19.47 32.38 18.13
1450
.05 19 46.83 30.42 44.73 29.53 40.53 27.76 36.32 26.01 32.10 24.29 27.87 22.64 23.64 21.21
16 38.11 34.82 36.21 33.56 32.39 31.04 28.56 28.55 24.71 24.71 20.85 20.85 16.97 16.97
22 65.14 31.89 62.64 30.94 57.64 29.05 52.64 27.17 47.63 25.30 42.62 23.47 37.61 21.73
012 1900 19 54.26 36.83 51.85 35.78 47.03 33.70 42.19 31.64 37.35 29.61 32.51 27.68 27.65 26.01
.07
16 44.18 43.13 42.12 41.49 37.99 37.99 33.85 33.85 29.71 29.71 25.55 25.55 21.37 21.37
22 71.98 35.85 69.21 34.85 63.67 32.86 58.13 30.89 52.59 28.93 47.05 27.03 41.51 25.31
2350 19 60.62 42.44 57.89 41.30 52.41 39.02 46.93 36.77 41.45 34.59 35.97 32.55 30.49 30.49
.12
16 47.82 47.82 45.79 45.79 41.72 41.72 37.66 37.66 33.59 33.59 29.52 29.52 25.44 25.44
22 65.89 31.93 63.44 30.98 58.55 29.09 53.65 27.21 48.75 25.34 43.85 23.49 38.94 21.73
1750 19 55.70 36.93 53.09 35.77 47.85 33.46 42.61 31.18 37.35 28.93 32.09 26.75 26.81 24.76
.06
16 44.35 42.14 42.24 40.60 38.02 37.55 33.78 33.78 29.53 29.53 25.27 25.27 20.98 20.98
22 75.61 37.49 72.79 36.44 67.15 34.34 61.51 32.26 55.87 30.19 50.23 28.16 44.58 26.26
2350
014 .08 19 63.64 44.28 60.75 43.02 54.97 40.53 49.19 38.06 43.40 35.64 37.61 33.33 31.81 31.36
16 50.09 50.09 47.97 47.97 43.71 43.71 39.44 39.44 35.17 35.17 30.90 30.90 26.62 26.62
22 83.01 42.04 79.93 40.94 73.75 38.75 67.58 36.57 61.41 34.42 55.23 32.34 49.06 30.52
2950
.10 19 67.98 49.45 65.08 48.26 59.28 45.89 53.48 43.57 47.68 41.33 41.88 39.29 36.08 36.08
16 54.67 54.67 52.53 52.53 48.24 48.24 43.96 43.96 39.67 39.67 35.38 35.38 31.10 31.10
22 82.25 39.79 79.12 38.58 72.88 36.16 66.62 33.74 60.37 31.34 54.10 28.97 47.84 26.65
2100 16 68.47 45.43 65.39 44.06 59.24 41.32 53.07 38.61 46.89 35.94 40.70 33.33 34.50 30.88
.03
16 55.23 51.82 52.57 49.96 47.23 46.25 41.88 41.88 36.52 36.52 31.13 31.13 25.73 25.73
22 94.97 46.65 91.32 45.28 84.03 42.55 76.72 39.83 69.42 37.13 62.11 34.48 54.80 31.95
016 2800 19 79.48 54.48 75.93 52.91 68.84 49.78 61.73 46.68 54.62 43.64 47.50 40.72 40.37 38.14
.05
16 64.12 63.23 61.19 60.85 55.34 55.34 49.48 49.48 43.61 43.61 37.72 37.72 31.82 31.82
22 102.66 51.90 98.96 50.54 91.55 47.82 84.14 45.12 76.73 42.46 69.32 39.90 61.90 37.72
3500 19 85.35 62.06 81.75 60.40 74.54 57.09 67.33 53.84 60.11 50.69 52.89 47.79 45.66 45.66
.08
16 69.63 69.63 66.75 66.75 60.99 60.99 55.23 55.23 49.45 49.45 43.67 43.67 37.88 37.88
22 106.58 52.05 102.62 50.46 94.70 47.29 86.78 44.13 78.85 40.98 70.92 37.84 62.99 34.74
2900 19 89.80 59.51 85.74 57.82 77.63 54.44 69.50 51.08 61.37 47.75 53.21 44.47 45.05 41.29
.03
16 71.75 68.29 68.44 65.88 61.79 61.08 55.13 55.13 48.45 48.45 41.75 41.75 35.03 35.03
22 122.11 60.50 117.57 58.81 108.48 55.45 99.38 52.11 90.29 48.79 81.19 45.52 72.10 42.39
024 3800 19 99.07 69.97 94.89 68.20 86.53 64.66 78.16 61.17 69.79 57.74 61.41 54.46 53.03 51.58
.06
16 80.95 80.95 77.60 77.60 70.90 70.90 64.19 64.19 57.48 57.48 50.76 50.76 44.03 44.03
22 133.27 67.86 128.35 66.08 118.51 62.52 108.68 58.97 98.84 55.46 89.00 52.01 79.16 48.77
4700 19 109.55 80.54 104.99 78.62 95.88 74.79 86.76 71.01 77.65 67.33 68.53 63.85 59.41 59.41
.07
16 88.34 88.34 84.97 84.97 78.24 78.24 71.50 71.50 64.76 64.76 58.02 58.02 51.28 51.28
25
40RM COOLING CAPACITIES — SI (cont)
EVAPORATOR COIL REFRIGERANT TEMP (C)

AIR
UNIT
40RM Airflow Ewb −1 0 2 4 6 8 10
(L/s)
BF (C) TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
22 125.95 61.58 121.69 59.95 113.17 56.69 104.65 53.45 96.11 50.22 87.57 47.04 79.02 43.94
3500 19 131.38 73.49 123.70 71.33 108.30 67.03 92.87 62.76 77.40 58.55 61.89 54.43 46.34 46.34
.04
16 86.95 83.51 83.12 80.66 75.43 74.98 67.71 67.71 59.95 59.95 52.17 52.17 44.34 44.34
22 146.03 72.86 140.80 70.97 130.35 67.19 119.89 63.44 109.43 59.71 98.98 56.05 88.52 52.56
028 4700 19 121.55 85.85 116.28 83.71 105.73 79.45 95.19 75.24 84.63 71.12 74.08 67.17 63.52 63.52
.06
16 97.09 97.09 93.33 93.33 85.80 85.80 78.27 78.27 70.74 70.74 63.20 63.20 55.66 55.66
22 159.37 81.76 153.60 79.77 142.08 75.79 130.55 71.82 119.02 67.89 107.49 64.01 95.96 60.28
5900 19 131.94 98.52 126.54 96.29 115.74 91.83 104.94 87.43 94.14 83.12 83.34 78.97 72.54 72.54
.08
16 105.39 105.39 101.70 101.70 94.30 94.30 86.91 86.91 79.52 79.52 72.13 72.13 64.73 64.73
22 151.16 74.13 146.07 72.13 135.88 68.13 125.69 64.15 115.49 60.19 105.27 56.27 95.05 52.43
4250 19 132.16 88.16 126.02 85.58 113.73 80.44 101.41 75.33 89.07 70.27 76.70 65.32 64.29 60.59
.04
16 103.92 100.45 99.38 97.00 90.28 90.14 81.14 81.14 71.97 71.97 62.77 62.77 53.52 53.52
22 175.30 87.47 169.02 85.21 156.48 80.70 143.93 76.21 131.38 71.76 118.83 67.38 106.28 63.19
5650
034 .06 19 145.93 103.33 139.63 100.72 127.01 95.52 114.39 90.38 101.76 85.34 89.14 80.49 76.50 76.18
40RM/RMS
16 116.36 116.36 111.88 111.88 102.92 102.92 93.96 93.96 85.00 85.00 76.03 76.03 67.06 67.06
22 191.24 97.85 184.33 95.48 170.49 90.77 156.66 86.08 142.82 81.42 128.99 76.84 115.15 72.42
7050 19 158.48 118.39 151.99 115.68 139.01 110.30 126.02 104.97 113.04 99.75 100.05 94.74 87.07 87.07
.08
16 126.37 126.37 121.95 121.95 113.12 113.12 104.29 104.29 95.45 95.45 86.62 86.62 77.78 77.78
LEGEND 4. Gross capacities shown do not include a deduction for evaporator-

BF — Bypass Factor fan motor heat.
Edb — Entering Dry Bulb 5. Formulas (cooling):
Ewb — Entering Wet Bulb sensible heat capacity (kW)
Ldb — Leaving Dry Bulb tldb = tedb −
Lwb — Leaving Wet Bulb 1.23 x 10-3 x (L/s)
SHC — Sensible Heating Capacity (kW) tlwb = wet-bulb temperature corresponding to enthalpy of air leav
TC — Total Capacity (kW) ing coil (hlwb)
NOTES: total capacity (kW)
1. Ratings based on approximately 8.3 C superheat leaving coil. hlwb = hewb −
2. Direct interpolation is permissible. Do not extrapolate. 1.20 x 10−3 x (L/s)
3. The SHC is based on 26.7 C db temperature of air entering the unit. where hewb = enthalpy of air entering coil (kJ/kg)
At any other temperature, correct the SHC reading from the table of
cooling capacities as follows:
Correction factor = 1.23 x 10−3 x (1 −BF) x (db −26.7)
Above 26.7 C, add SHC correction to SHC. Below 26.7 C, subtract
SHC correction from SHC.
26
HYDRONIC HEATING CAPACITIES — ENGLISH HYDRONIC HEATING CAPACITIES — SI
1-ROW 2-ROW 1-ROW 2-ROW
STEAM* HOT WATER COIL† STEAM* HOT WATER COIL†
AIRFLOW UNIT AIRFLOW
UNIT Water (L/s) Water
(Cfm)
Cap. Ldb Cap. Ldb Flow PD Cap. Ldb Cap. Ldb Flow PD
(Gpm) (L/s)
1,800 146 134 156.0 140 15.6 3.4 850 43 57 46 59 1.0 10.2
40RM 40RM 1150 53 53 53 53 1.2 12.8
2,400 173 126 183.0 131 18.3 4.3 007
007 3,000 209 123 206.0 124 20.6 5.2 1450 62 51 61 50 1.3 16.0
40RM 40RM
2,250 168 129 174.0 133 17.4 4.0 40RMS 1000 48 55 50 56 1.1 11.5
40RMS 1400 59 50 60 50 1.3 15.3
008 3,000 209 123 206.0 124 20.6 5.2 008
3,750 240 117 238.0 118 23.8 6.5 1800 71 47 70 47 1.5 19.5
2,550 183 125 199.0 132 19.9 4.5 40RMS 1200 54 52 58 55 1.3 13.4
40RMS 1600 64 48 69 50 1.5 17.3
010 3,400 229 121 233.0 123 23.3 5.7 010
4,250 254 114 271.0 119 27.1 7.2 2000 74 46 79 48 1.7 21.4
40RM 40RM 1450 62 50 88 65 1.9 15.0
3,000 209 123 299.0 152 29.9 5.0 40RMS
40RMS 4,000 243 115 275.0 124 27.5 6.6 1900 72 46 90 54 2.0 24.7
012 012
5,000 279 111 316.0 119 31.6 8.2 2350 82 44 93 48 2.0 24.5
40RM 3,750 370 150 362.0 149 36.2 4.2 40RM 1750 108 66 106 65 2.3 12.4
40RMS 5,000 425 137 409.0 136 40.9 5.1 40RMS 2350 122 58 120 57 2.6 15.2
014 6,250 465 128 456.0 128 45.6 6.0 014 2950 136 53 134 52 2.9 17.9
40RM 40RM 2100 117 61 120 62 2.6 13.3
40RMS 4,500 402 141 412.0 145 41.2 4.5 40RMS
6,000 458 129 471.0 133 47.1 5.5 016 2800 129 53 137 55 3.0 16.2
016 3500 140 48 154 51 3.3 19.5
7,500 479 118 529.0 125 52.9 6.6
40RM/RMS
40RM 6,000 458 129 506.0 138 50.6 5.1 40RM 2900 135 53 150 58 3.3 15.6
40RMS 8,000 487 115 584.0 128 58.4 6.3 40RMS 3800 140 46 170 52 3.7 18.6
024 10,000 499 105 652.0 120 65.2 7.5 024 4700 146 41 191 49 4.1 22.3
40RM 7,500 511 122 649.0 140 64.9 5.7 40RM 3500 149 50 189 60 4.1 16.9
40RMS 10,000 575 112 752.0 130 75.2 7.1 40RMS 4700 166 44 218 53 4.7 20.8
028 12,500 626 106 842.0 122 84.2 8.5 028 5900 183 41 247 50 5.4 25.4
40RM 9,000 560 117 735.0 136 73.5 6.2 40RM 4250 164 47 215 57 4.7 18.5
40RMS 12,000 621 107 850.0 126 85.0 7.8 40RMS 5650 180 41 247 51 5.4 22.8
034 15,000 670 101 950.0 119 95.0 9.3 034 7050 196 38 278 48 6.0 27.7
LEGEND LEGEND
Cap. — Capacity (Btuh in thousands) Cap. — Capacity (kW)
Ldb — Leaving-Air Dry-Bulb Temp (F) Ldb — Leaving-Air Dry-Bulb Temp (C)
PD — Pressure Drop (ft water) PD — Pressure Drop (kPa)
*Based on 5 psig steam, 60 F entering-air temperature. All steam coils are non- *Based on 34.5 kPag steam, 15.6 C entering-air temperature. All steam coils are
freeze type. non-freeze type.
†Based on 200 F entering water, 20 F water temperature drop, 60 F entering-air †Based on 93.3 C entering-water temperature, 11.1 C water temperature drop,
temperature. 15.6 C entering-air temperature.
NOTES: NOTES:
1. Maximum operating limits for heating coils: 175 psig at 400 F. 1. Maximum operating limits for heating coils: 1207 kPag at 204.4 C.
Capacity (Btuh) Capacity (kW)
2. Leaving db = ent db (F) + 2. Leaving db = ent db (C) +
1.1 x cfm 1.23 x 10-3 x L/s
3. See Heating Correction Factors table. 3. See Heating Correction Factors table.
HEATING CORRECTION FACTORS − ENGLISH HEATING CORRECTION FACTORS — SI

HOT WATER COIL HOT WATER COIL
Water Temp Ent Water Entering-Air Temp (F) Water Temp Ent Water Entering-Air Temp (C)
Drop Temp Drop Temp
(F) (F) 40 50 60 70 80 (C) (C) 4 10 16 20 25
140 0.72 0.64 0.57 0.49 0.41 60 0.72 0.64 0.55 0.50 0.43
160 0.89 0.81 0.74 0.66 0.58 70 0.87 0.79 0.71 0.65 0.58
10 180 1.06 0.98 0.90 0.83 0.75 5 80 1.02 0.94 0.86 0.80 0.73
200 1.22 1.15 1.07 1.00 0.92 90 1.17 1.09 1.01 0.95 0.89
220 1.39 1.32 1.24 1.17 1.09 100 1.32 1.24 1.16 1.10 1.04
140 0.64 0.57 0.49 0.41 0.33 60 0.65 0.56 0.48 0.42 0.35
160 0.81 0.74 0.66 0.58 0.51 70 0.80 0.72 0.63 0.58 0.51
20 180 0.98 0.91 0.83 0.75 0.68 11 80 0.95 0.87 0.79 0.73 0.66
200 1.15 1.08 1.00 0.93 0.85 90 1.10 1.02 0.94 0.89 0.82
220 1.32 1.25 1.17 1.10 1.02 100 1.26 1.18 1.09 1.04 0.97
140 0.56 0.49 0.41 0.33 0.24 60 0.56 0.48 0.39 0.33 0.26
160 0.74 0.66 0.58 0.51 0.43 70 0.72 0.63 0.55 0.49 0.42
30 180 0.91 0.83 0.76 0.68 0.60 16 80 0.87 0.79 0.70 0.65 0.58
200 1.08 1.00 0.93 0.85 0.78 90 1.02 0.94 0.86 0.81 0.74
220 1.25 1.18 1.10 1.03 0.95 100 1.18 1.10 1.02 0.97 0.90
STEAM COIL STEAM COIL

Steam Pressure Entering-Air Temp (F) Steam Pressure Entering-Air Temp (C)
(psig) 40 50 60 70 80 (kPag) 4 10 16 20 25
0 1.06 0.98 0.91 0.85 0.78 0 1.07 0.99 0.91 0.86 0.80
2 1.09 1.02 0.95 0.89 0.82 14 1.10 1.02 0.95 0.90 0.84
5 1.13 1.06 1.00 0.93 0.87 35 1.14 1.07 0.99 0.95 0.89
NOTE: Multiply capacity given in the Hydronic Heating Capacities table by the NOTE: Multiply capacity given in the Hydronic Heating Capacities table by the
correction factor for conditions at which unit is actually operating. Correct leaving- correction factor for conditions at which unit is actually operating. Correct leaving-
air temperature using formula in Note 2 of Hydronic Heating Capacities table. air temperature using formula in Note 2 of Hydronic Heating Capacities table.
27
FAN PERFORMANCE DATA — 0.0-1.2 in. wg ESP — 60 Hz, ENGLISH
EXTERNAL STATIC PRESSURE (in. wg)

UNIT AIRFLOW 0.0 0.2 0.4 0.6 0.8 1.0 1.2
(Cfm)
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 320 0.22 442 0.32 534 0.42 611 0.52 678 0.61 739 0.70 795 0.80
2,100 373 0.31 483 0.42 569 0.53 642 0.63 708 0.73 767 0.82 821 0.92
40RM
007 2,400 427 0.42 526 0.53 606 0.64 676 0.75 739 0.86 796 0.96 849 1.06
2,700 480 0.54 570 0.67 646 0.78 712 0.89 773 1.00 828 1.11 880 1.21
3,000 533 0.69 616 0.82 687 0.94 750 1.05 808 1.16 862 1.28 912 1.39
2,250 359 0.32 472 0.44 560 0.55 634 0.65 700 0.75 759 0.86 814 0.96
40RM 2,600 415 0.45 516 0.57 599 0.68 669 0.79 732 0.90 790 1.01 843 1.11
40RMS 3,000 478 0.62 569 0.75 645 0.86 712 0.98 773 1.09 828 1.20 879 1.32
008
3,400 542 0.82 624 0.95 695 1.08 758 1.20 815 1.31 869 1.43 918 1.55
3,750 598 1.03 673 1.17 740 1.29 800 1.42 855 1.60 906 1.66 954 1.78
2,550 396 0.42 502 0.54 586 0.65 658 0.76 722 0.87 780 0.97 833 1.08
2,975 462 0.60 556 0.72 634 0.84 701 0.95 762 1.06 818 1.18 870 1.29
40RMS
010 3,400 527 0.80 612 0.93 684 1.06 748 1.18 806 1.30 860 1.41 910 1.53
3,825 593 1.05 670 1.18 737 1.31 797 1.44 852 1.56 904 1.68 952 1.80
4,250 659 1.33 729 1.47 791 1.60 848 1.73 901 1.86 950 1.98 997 2.11
3,000 444 0.58 541 0.71 621 0.83 691 0.94 753 1.05 809 1.17 862 1.28
40RM/RMS
40RM 3,500 518 0.82 604 0.95 677 1.08 742 1.20 801 1.32 855 1.44 906 1.56
40RMS 4,000 592 1.11 669 1.25 736 1.38 797 1.51 853 1.63 904 1.75 953 1.88
012 4,500 666 1.44 735 1.59 797 1.72 854 1.86 907 1.99 956 2.12 1003 2.24
5,000 740 1.83 803 1.98 861 2.12 914 2.26 964 2.39 1010 2.53 1055 2.66
3,750 363 0.37 475 0.58 566 0.80 645 1.02 715 1.24 779 1.47 839 1.69
40RM 4,300 416 0.53 517 0.78 601 1.02 676 1.26 743 1.50 805 1.74 862 1.99
40RMS 5,000 484 0.81 573 1.08 650 1.35 719 1.62 782 1.89 841 2.16 896 2.44
014 5,700 552 1.17 631 1.47 702 1.76 766 2.06 826 2.36 881 2.66 934 2.96
6,250 605 1.51 678 1.83 744 2.15 805 2.47 862 2.79 915 3.11 966 3.43
4,500 391 0.51 495 0.75 581 1.00 657 1.25 725 1.50 787 1.76 845 2.02
40RM 5,300 460 0.80 551 1.08 629 1.35 700 1.63 764 1.91 823 2.20 878 2.48
40RMS 6,000 521 1.13 602 1.43 675 1.73 741 2.04 801 2.34 858 2.65 911 2.96
016 6,800 590 1.60 663 1.93 730 2.26 791 2.59 847 2.92 901 3.26 951 3.60
7,500 651 2.10 718 2.45 779 2.81 837 3.16 890 3.52 941 3.88 990 4.24
6,000 503 1.07 587 1.37 661 1.67 727 1.97 789 2.28 846 2.59 900 2.90
40RM 7,000 586 1.64 660 1.98 726 2.31 787 2.65 844 2.99 898 3.33 948 3.67
40RMS 8,000 670 2.37 735 2.74 795 3.12 851 3.49 904 3.86 954 4.23 1001 4.61
024 9,000 754 3.28 812 3.69 867 4.09 918 4.50 967 4.90 1014 5.31 1059 5.72
10,000 838 4.39 891 4.83 941 5.27 988 5.70 1034 6.14 1077 6.85 1120 7.02
7,500 412 1.15 492 1.53 568 2.00 640 2.56 710 3.22 776 3.98 840 4.83
40RM 8,750 481 1.76 550 2.17 616 2.66 680 3.22 742 3.86 802 4.58 860 5.38
40RMS 10,000 549 2.55 610 2.99 669 3.50 726 4.07 782 4.70 836 5.40 889 6.17
028 11,250 618 3.52 672 4.00 725 4.53 777 5.12 827 5.76 876 6.45 925 7.21
12,500 687 4.71 735 5.22 783 5.78 830 6.38 876 7.04 922 7.74 966 8.49
9,000 471 1.78 539 2.17 604 2.63 667 3.17 728 3.78 788 4.46 845 5.22
40RM 10,500 550 2.72 608 3.15 665 3.64 720 4.18 774 4.79 827 5.45 878 6.18
40RMS 12,000 628 3.93 679 4.40 730 4.92 779 5.48 827 6.09 874 6.76 921 7.47
034 13,500 707 5.44 752 5.94 797 6.49 841 7.08 885 7.71 928 8.38 970 9.10
15,000 785 7.27 826 7.81 867 8.39 907 9.01 947 9.66 986 10.35 1024 11.07
See Legend and Notes on page 32.
28

UNIT AIRFLOW 1.4 1.6
(Cfm) 1.8 2.0 2.2 2.4
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 847 0.89 896 0.98 942 1.07 986 1.16 1027 1.25 — —
2,100 872 1.02 920 1.11 965 1.21 1008 1.30 1050 1.40 — —
40RM
007 2,400 899 1.16 946 1.26 990 1.36 1033 1.46 1073 1.55 — —
2,700 928 1.32 974 1.42 1018 1.52 1059 1.63 1099 1.73 — —
3,000 959 1.49 1004 1.60 1046 1.71 1087 1.81 1126 1.92 — —
2,250 865 1.06 913 1.16 958 1.27 1001 1.37 1042 1.47 — —
40RM 2,600 893 1.22 940 1.33 984 1.43 1027 1.54 1067 1.65 — —
40RMS 3,000 928
008 1.43 973 1.54 1017 1.65 1058 1.76 1098 1.87 — —
3,400 965 1.66 1010 1.78 1052 1.89 1092 2.00 1131 2.12 — —
3,750 1000 1.90 1043 2.02 1084 2.13 1124 2.25 1162 2.37 — —
2,550 884 1.18 931 1.29 975 1.40 1018 1.50 1059 1.61 — —
2,975 919 1.40 965 1.51 1009 1.62 —
1050 —
1.73 —
1090 —
1.84 —
— —
—
40RMS
010 3,400 957 1.64 1002 1.76 1044 1.87 1085 1.98 1124 2.10 — —
3,825 998 1.92 1041 2.04 1082 2.16 1122 2.27 1160 2.39 — —
4,250 1041 2.23 1083 2.35 1123 2.48 1161 2.60 1199 2.72 — —
3,000 911 1.39 958 1.50 1002 1.61 1044 1.72 1084 1.83 1123 1.94
40RM/RMS
40RM 3,500 953 1.67 998 1.79 1041 1.90 1082 2.02 1122 2.13 1159 2.25
40RMS 4,000 999 2.00 1042 2.12 1084 2.24 1124 2.36 1162 2.48 1199 2.60
012 4,500 1047 2.37 1089 2.50 1129 2.62 1168 2.74 — — — —
5,000 1097 2.79 1138 2.92 1177 3.05 — — — — — —
3,750 894 1.91 947 2.14 996 2.37 1044 2.60 1089 2.83 — —
40RM 4,300 916 2.23 967 2.48 1016 2.73 1062 2.98 —
1107 —
3.24 — —
—
40RMS 5,000 948 2.71 997 2.98 1044 3.26 1089 3.53 1133 3.81 — —
014 5,700 984 3.25 1031 3.55 1076 3.86 1120 4.16 1162 4.46 — —
6,250 1014 3.75 1060 4.07 1104 4.39 1147 4.71 1188 5.03 — —
4,500 899 2.29 951 2.56 999 2.84 1046 3.12 1091 3.41 1133 3.70
40RM 5,300 930 2.78 980 3.08 1027 3.38 1072 3.68 1116 3.99 1157 4.30
40RMS 6,000 961 3.28 1009 3.60 1055 3.92 1098 4.24 1141 4.57 1181 4.91
016 6,800 999 3.94 1045 4.28 1089 4.63 1132 4.98 1173 5.33 — —
7,500 1036 4.60 1080 4.97 1123 5.34 1164 5.71 — — — —
6,000 950 3.21 999 3.53 1045 3.85 1089 4.17 1131 4.50 1172 4.83
40RM 7,000 996 4.02 1042 4.37 1086 4.72 1129 5.07 1169 5.43 — —
40RMS 8,000 1047 4.99 1091 5.37 1133 5.75 1173 6.13 — — — —
024 9,000 1102 6.13 1143 6.54 1183 6.96 — — — — — —
10,000 1160 7.46 1200 7.91 — — — — — — — —
7,500 903 5.79 963 6.83 1021 7.98 1078 9.21 — — — —
40RM 8,750 917 6.26 972 7.22 1025 8.26 1078 9.38 — — — —
40RMS 10,000 941 7.01 991 7.91 1040 8.89 1089 9.93 — — — —
028 11,250 972 8.02 1019 8.89 1064 9.83 — — — — — —
12,500 1010 9.29 1053 10.15 1095 11.05 — — — — — —
9,000 901 6.07 955 6.98 1008 7.98 1060 9.05 — — — —
40RM 10,500 928 6.98 978 7.84 1026 8.76 1073 9.74 — — — —
40RMS 12,000 966 8.24 1011 9.07 1055 9.95 1098 10.88 — — — —
034 13,500 1011 9.86 1052 10.67 1092 11.52 — — — — — —
15,000 1062 11.84 — — — — — — — — — —
29
FAN PERFORMANCE DATA — 0.0-1.2 in. wg ESP — 50 HZ, ENGLISH

UNIT AIRFLOW 0.0 0.2 0.4 0.6 0.8 1.0 1.2
(Cfm)
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 320 0.22 442 0.32 534 0.42 611 0.52 678 0.61 739 0.70 795 0.80
2,100 373 0.31 483 0.42 569 0.53 642 0.63 708 0.73 767 0.82 821 0.92
40RM
007 2,400 427 0.42 526 0.53 606 0.64 676 0.75 739 0.86 796 0.96 849 1.06
2,700 480 0.54 570 0.67 646 0.78 712 0.89 773 1.00 828 1.11 880 1.21
3,000 533 0.69 616 0.82 687 0.94 750 1.05 808 1.16 862 1.28 912 1.39
2,250 359 0.32 472 0.44 560 0.55 634 0.65 700 0.75 759 0.86 814 0.96
40RM 2,600 415 0.45 516 0.57 599 0.68 669 0.79 732 0.90 790 1.01 843 1.11
40RMS 3,000 478 0.62 569 0.75 645 0.86 712 0.98 773 1.09 828 1.20 879 1.32
008
3,400 542 0.82 624 0.95 695 1.08 758 1.20 815 1.31 869 1.43 918 1.55
3,750 598 1.03 673 1.17 740 1.29 800 1.42 855 1.60 906 1.66 954 1.78
2,550 396 0.42 502 0.54 586 0.65 658 0.76 722 0.87 780 0.97 833 1.08
2,975 462 0.60 556 0.72 634 0.84 701 0.95 762 1.06 818 1.18 870 1.29
40RMS
010 3,400 527 0.80 612 0.93 684 1.06 748 1.18 806 1.30 860 1.41 910 1.53
3,825 593 1.05 670 1.18 737 1.31 797 1.44 852 1.56 904 1.68 952 1.80
4,250 659 1.33 729 1.47 791 1.60 848 1.73 901 1.86 950 1.98 997 2.11
3,000 444 0.58 541 0.71 621 0.83 691 0.94 753 1.05 809 1.17 862 1.28
40RM/RMS
40RM 3,500 518 0.82 604 0.95 677 1.08 742 1.20 801 1.32 855 1.44 906 1.56
40RMS 4,000 592 1.11 669 1.25 736 1.38 797 1.51 853 1.63 904 1.75 953 1.88
012 4,500 666 1.44 735 1.59 797 1.72 854 1.86 907 1.99 956 2.12 1003 2.24
5,000 740 1.83 803 1.98 861 2.12 914 2.26 964 2.39 1010 2.53 1055 2.66
3,750 363 0.37 475 0.58 566 0.80 645 1.02 715 1.24 779 1.47 839 1.69
40RM 4,300 416 0.53 517 0.78 601 1.02 676 1.26 743 1.50 805 1.74 862 1.99
40RMS 5,000 484 0.81 573 1.08 650 1.35 719 1.62 782 1.89 841 2.16 896 2.44
014 5,700 552 1.17 631 1.47 702 1.76 766 2.06 826 2.36 881 2.66 934 2.96
6,250 605 1.51 678 1.83 744 2.15 805 2.47 862 2.79 915 3.11 966 3.43
4,500 391 0.51 495 0.75 581 1.00 657 1.25 725 1.50 787 1.76 845 2.02
40RM 5,300 460 0.80 551 1.08 629 1.35 700 1.63 764 1.91 823 2.20 878 2.48
40RMS 6,000 521 1.13 602 1.43 675 1.73 741 2.04 801 2.34 858 2.65 911 2.96
016 6,800 590 1.60 663 1.93 730 2.26 791 2.59 847 2.92 901 3.26 951 3.60
7,500 651 2.10 718 2.45 779 2.81 837 3.16 890 3.52 941 3.88 990 4.24
6,000 503 1.07 587 1.37 661 1.67 727 1.97 789 2.28 846 2.59 900 2.90
40RM 7,000 586 1.64 660 1.98 726 2.31 787 2.65 844 2.99 898 3.33 948 3.67
40RMS 8,000 670 2.37 735 2.74 795 3.12 851 3.49 904 3.86 954 4.23 1001 4.61
024 9,000 754 3.28 812 3.69 867 4.09 918 4.50 967 4.90 1014 5.31 1059 5.72
10,000 838 4.39 891 4.83 941 5.27 988 5.70 1034 6.14 1077 6.85 1120 7.02
7,500 412 1.15 492 1.53 568 2.00 640 2.56 710 3.22 776 3.98 840 4.83
40RM 8,750 481 1.76 550 2.17 616 2.66 680 3.22 742 3.86 802 4.58 860 5.38
40RMS 10,000 549 2.55 610 2.99 669 3.50 726 4.07 782 4.70 836 5.40 889 6.17
028 11,250 618 3.52 672 4.00 725 4.53 777 5.12 827 5.76 876 6.45 925 7.21
12,500 687 4.71 735 5.22 783 5.78 830 6.38 876 7.04 922 7.74 966 8.49
9,000 471 1.78 539 2.17 604 2.63 667 3.17 728 3.78 788 4.46 845 5.22
40RM 10,500 550 2.72 608 3.15 665 3.64 720 4.18 774 4.79 827 5.45 878 6.18
40RMS 12,000 628 3.93 679 4.40 730 4.92 779 5.48 827 6.09 874 6.76 921 7.47
034 13,500 707 5.44 752 5.94 797 6.49 841 7.08 885 7.71 928 8.38 970 9.10
15,000 785 7.27 826 7.81 867 8.39 907 9.01 947 9.66 986 10.35 1024 11.07
30

UNIT AIRFLOW 1.4 1.6
(Cfm) 1.8 2.0 2.2 2.4
Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp
1,800 847 0.89 896 0.98 942 1.07 986 1.16 1027 1.25 — —
2,100 872 1.02 920 1.11 965 1.21 1008 1.30 1050 1.40 — —
40RM
007 2,400 899 1.16 946 1.26 990 1.36 1033 1.46 1073 1.55 — —
2,700 928 1.32 974 1.42 1018 1.52 1059 1.63 1099 1.73 — —
3,000 959 1.49 1004 1.60 1046 1.71 1087 1.81 1126 1.92 — —
2,250 865 1.06 913 1.16 958 1.27 1001 1.37 1042 1.47 — —
40RM 2,600 893 1.22 940 1.33 984 1.43 1027 1.54 1067 1.65 — —
40RMS 3,000 928
008 1.43 973 1.54 1017 1.65 1058 1.76 1098 1.87 — —
3,400 965 1.66 1010 1.78 1052 1.89 1092 2.00 1131 2.12 — —
3,750 1000 1.90 1043 2.02 1084 2.13 1124 2.25 1162 2.37 — —
2,550 884 1.18 931 1.29 975 1.40 1018 1.50 1059 1.61 — —
2,975 919 1.40 965 1.51 1009 1.62 1050 1.73 1090 1.84 — —
40RMS
010 3,400 957 1.64 1002 1.76 1044 1.87 1085 1.98 1124 2.10 — —
3,825 998 1.92 1041 2.04 1082 2.16 1122 2.27 1160 2.39 — —
4,250 1041 2.23 1083 2.35 1123 2.48 1161 2.60 1199 2.72 — —
3,000 911 1.39 958 1.50 1002 1.61 1044 1.72 1084 1.83 1123 1.94
40RM/RMS
40RM 3,500 953 1.67 998 1.79 1041 1.90 1082 2.02 1122 2.13 1159 2.25
40RMS 4,000 999 2.00 1042 2.12 1084 2.24 1124 2.36 1162 2.48 1199 2.60
012 4,500 1047 2.37 1089 2.50 1129 2.62 1168 2.74 — — — —
5,000 1097 2.79 1138 2.92 1177 3.05 — — — — — —
3,750 894 1.91 947 2.14 996 2.37 1044 2.60 1089 2.83 — —
40RM 4,300 916 2.23 967 2.48 1016 2.73 1062 2.98 1107 3.24 — —
40RMS 5,000 948 2.71 997 2.98 1044 3.26 1089 3.53 1133 3.81 — —
014 5,700 984 3.25 1031 3.55 1076 3.86 1120 4.16 1162 4.46 — —
6,250 1014 3.75 1060 4.07 1104 4.39 1147 4.71 1188 5.03 — —
4,500 899 2.29 951 2.56 999 2.84 1046 3.12 1091 3.41 1133 3.70
40RM 5,300 930 2.78 980 3.08 1027 3.38 1072 3.68 1116 3.99 1157 4.30
40RMS 6,000 961 3.28 1009 3.60 1055 3.92 1098 4.24 1141 4.57 1181 4.91
016 6,800 999 3.94 1045 4.28 1089 4.63 1132 4.98 1173 5.33 — —
7,500 1036 4.60 1080 4.97 1123 5.34 1164 5.71 — — — —
6,000 950 3.21 999 3.53 1045 3.85 1089 4.17 1131 4.50 1172 4.83
40RM 7,000 996 4.02 1042 4.37 1086 4.72 1129 5.07 1169 5.43 — —
40RMS 8,000 1047 4.99 1091 5.37 1133 5.75 1173 6.13 — — — —
024 9,000 1102 6.13 1143 6.54 1183 6.96 — — — — — —
10,000 1160 7.46 1200 7.91 — — — — — — — —
7,500 903 5.79 963 6.83 1021 7.98 1078 9.21 — — — —
40RM 8,750 917 6.26 972 7.22 1025 8.26 1078 9.38 — — — —
40RMS 10,000 941 7.01 991 7.91 1040 8.89 1089 9.93 — — — —
028 11,250 972 8.02 1019 8.89 1064 9.83 — — — — — —
12,500 1010 9.29 1053 10.15 1095 11.05 — — — — — —
9,000 901 6.07 955 6.98 1008 7.98 1060 9.05 — — — —
40RM 10,500 928 6.98 978 7.84 1026 8.76 1073 9.74 — — — —
40RMS 12,000 966 8.24 1011 9.07 1055 9.95 1098 10.88 — — — —
034 13,500 1011 9.86 1052 10.67 1092 11.52 — — — — — —
15,000 1062 11.84 — — — — — — — — — —
31
LEGEND FACTOR Y-SUPPLIED FILTER PRESSURE DROP

Bhp - Brake Horsepower Input to Fan - ENGLISH
ESP - External Static Pressure
Bold indicates field supplied drive is required.

AIRFLOW PRESSURE DROP
UNIT (Cfm) (in. wg)
Plain type indicates standard motor and standard drive.
40RM 1,800 0.05

Underline indicates a different motor and drive combination other than
2,400 0.08
the standard motor and standard drive combination is required. Refer to
007
3,000 0.11
fan motor and drive tables, pages 52-59, to complete selection. 40RM
2,250 0.07
40RMS
NOTES: 008 3,000 0.11
1. Maximum allowable fan speed is 1100 rpm for unit sizes 028 and 3,750 0.15
034; 1200 rpm for all other sizes.
2. Fan performance is based on deductions for wet coil, clean 1-in. 40RMS 2,550 0.09
filters, and unit casing. See table at right for factory-supplied filter 010 3,400 0.13
pressure drop. 4,250 0.18
3. For 60 Hz units, the medium-static drive and standard motor combi 40RM
nation is not available for 028 size. For 50 Hz units, the medium- 40RMS 3,000 0.11
static drive and standard motor combination is not available for 4,000 0.17
012
016-028 sizes. Use alternate motor if medium-static drive is required 5,000 0.23
for these sizes.
40RM 3,750 0.06
40RMS 5,000 0.10
014 6,250 0.13
40RM 4,500 0.08
40RMS 6,000 0.12
016 7,500 0.17
40RM/RMS
40RM 6,000 0.12

40RMS 8,000 0.19
024 10,000 0.26
40RM 7,500 0.15
40RMS 10,000 0.22
028 12,500 0.30
40RM 9,000 0.19
40RMS 12,000 0.29
034 15,000 0.40
32
FAN PERFORMANCE DATA — 0-300 Pa ESP — 60 Hz, SI
EXTERNAL STATIC PRESSURE (Pa)

UNIT AIRFLOW
(L/s) 0 50 100 150 200 250 300
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 5.34 0.17 7.38 0.25 8.91 0.32 10.20 0.39 11.30 0.46 12.30 0.53 13.30 0.60
1000 6.28 0.24 8.10 0.32 9.53 0.40 10.80 0.48 11.80 0.55 12.80 0.63 13.70 0.70
40RM
007 1150 7.22 0.33 8.86 0.41 10.20 0.50 11.40 0.58 12.40 0.66 13.40 0.73 14.20 0.81
1300 8.17 0.43 9.64 0.52 10.90 0.61 12.00 0.69 13.00 0.77 13.90 0.85 14.80 0.93
1450 9.11 0.55 10.50 0.64 11.60 0.73 12.70 0.82 13.60 0.91 14.50 0.99 15.40 1.07
1000 5.63 0.22 7.61 0.30 9.11 0.38 10.40 0.45 11.50 0.53 12.50 0.61 13.40 0.68
40RM 1200 6.76 0.32 8.49 0.41 9.88 0.50 11.10 0.57 12.10 0.66 13.10 0.74 14.00 0.82
40RMS 1400 7.89 0.46 9.42 0.55 10.70 0.64 11.80 0.72 12.80 0.81 13.80 0.89 14.60 0.97
008
1600 9.01 0.62 10.40 0.71 11.60 0.80 12.60 0.89 13.60 0.98 14.50 1.07 15.30 1.16
1800 10.10 0.80 11.40 0.90 12.50 0.10 13.50 1.09 14.40 1.18 15.20 1.27 16.00 1.36
1200 6.58 0.31 8.35 0.40 9.76 0.49 11.00 0.57 12.00 0.65 13.00 0.73 13.90 0.81
1400 7.67 0.44 9.25 0.54 10.60 0.63 11.70 0.71 12.70 0.80 13.60 0.88 14.50 0.96
40RMS
010 1600 8.77 0.60 10.20 0.70 11.40 0.79 12.50 0.88 13.40 0.97 14.30 1.05 15.20 1.14
1800 9.86 0.78 11.10 0.88 12.30 0.98 13.30 1.07 14.20 1.16 15.10 1.25 15.90 1.34
2000 11.00 0.99 12.10 1.09 13.20 1.19 14.10 1.29 15.00 3.38 15.80 1.48 16.60 1.57
1450 7.58 0.46 9.18 0.56 10.50 0.65 11.60 0.73 12.70 0.82 13.60 0.90 14.50 0.99
40RM/RMS
40RM 1670 8.73 0.63 10.20 0.73 11.40 0.83 12.50 0.92 13.40 1.01 14.30 1.10 15.20 1.18
40RMS 1900 9.93 0.84 11.20 0.95 12.30 1.05 13.30 1.14 14.30 1.24 15.10 1.33 15.90 1.42
012 2120 11.10 1.08 12.20 1.18 13.30 1.29 14.20 1.39 15.10 1.48 15.90 1.58 16.70 1.68
2350 12.30 1.36 13.30 1.17 14.30 1.57 15.20 1.68 16.00 1.78 16.80 1.88 17.60 1.98
1750 5.99 0.27 7.88 0.43 9.41 0.59 10.70 0.75 11.90 0.92 13.00 1.08 14.00 1.25
40RM 2050 7.01 0.41 8.68 0.60 10.10 0.78 11.30 0.96 12.40 1.14 13.50 1.33 14.40 1.51
40RMS 2350 8.04 0.60 9.53 0.81 10.80 1.01 12.00 1.21 13.00 1.41 14.00 1.61 14.90 1.82
014 2650 9.07 0.84 10.40 1.06 11.60 1.28 12.70 1.50 13.70 1.72 14.60 1.94 15.50 2.16
2950 10.10 1.13 11.30 1.37 12.40 1.61 13.40 1.85 14.40 2.08 15.30 2.32 16.10 2.56
2100 6.43 0.37 8.19 0.55 9.65 0.73 10.90 0.92 12.10 1.11 13.10 1.30 14.10 1.50
40RM 2450 7.51 0.57 9.06 0.77 10.40 0.97 11.60 1.18 12.70 1.39 13.70 1.60 14.60 1.81
40RMS 2800 8.58 0.82 9.96 1.05 11.20 1.27 12.30 1.49 13.30 1.72 14.30 1.95 15.10 2.18
016 3150 9.65 1.14 10.90 1.38 12.00 1.63 13.10 1.87 14.00 2.12 14.90 2.36 15.80 2.61
3500 10.70 1.52 11.90 1.78 12.90 2.05 13.90 2.31 14.80 2.58 15.60 2.84 16.40 3.11
2900 8.58 0.86 9.96 1.09 11.20 1.32 12.30 1.55 13.30 1.78 14.20 2.01 15.10 2.25
40RM 3350 9.91 1.28 11.10 1.53 12.20 1.79 13.20 2.04 14.20 2.30 15.10 2.55 15.90 2.81
40RMS 3800 11.30 1.81 12.30 2.09 13.30 2.37 14.30 2.64 15.10 2.93 16.00 3.21 16.80 3.49
024 4250 12.60 2.46 13.60 2.76 14.50 3.07 15.30 3.37 16.10 3.67 16.90 3.98 17.70 4.28
4700 13.90 3.24 14.80 3.57 15.60 3.90 16.40 4.22 17.20 4.55 17.90 4.88 18.60 5.21
3500 6.79 0.84 8.14 1.12 9.42 1.47 10.70 1.89 11.80 2.39 12.90 2.96 14.00 3.61
40RM 4100 7.95 1.29 9.12 1.60 10.20 1.96 11.30 2.38 12.40 2.86 13.40 3.40 14.30 4.00
40RMS 4700 9.12 1.88 10.10 2.21 11.10 2.59 12.10 3.02 13.00 3.49 13.90 4.02 14.80 4.60
028 5300 10.30 2.62 11.20 3.00 12.10 3.37 12.90 3.81 13.80 4.29 14.60 4.82 15.40 5.38
5900 11.40 3.52 12.30 3.90 13.10 4.32 13.90 4.77 14.60 5.26 15.40 5.79 16.10 6.35
4250 7.86 1.33 8.99 1.63 10.10 1.97 11.10 2.37 12.20 2.83 13.20 3.34 14.10 3.92
40RM 4950 9.15 2.03 10.10 2.35 11.10 2.72 12.00 3.12 12.90 3.58 13.80 4.08 14.70 4.62
40RMS 5650 10.40 2.92 11.30 3.27 12.20 3.66 13.00 4.08 13.80 4.54 14.60 5.04 15.40 5.57
034 6350 11.70 4.02 12.50 4.40 13.30 4.81 14.00 5.25 14.70 5.72 15.50 6.23 16.20 6.77
7050 13.00 5.37 13.70 5.77 14.40 6.21 15.10 6.66 15.70 7.15 16.40 7.67 17.10 8.21
33

UNIT AIRFLOW 350 400 450 500 550 600
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 14.10 0.67 15.00 0.74 15.70 0.81 16.50 0.87 17.20 0.94 — —
1000 14.60 0.77 15.40 0.84 16.10 0.91 16.90 0.98 17.60 1.06 — —
40RM
007 1150 15.10 0.88 15.90 0.96 16.60 1.03 17.30 1.11 18.00 1.18 — —
1300 15.60 1.01 16.40 1.09 17.10 1.17 17.80 1.25 18.40 1.32 — —
1450 16.10 1.15 16.90 1.24 17.60 1.32 18.30 1.40 18.90 1.48 — —
1000 14.30 0.76 15.10 0.83 15.80 0.91 16.60 0.99 17.30 1.06 — —
40RM 1200 14.80 0.90 15.60 0.98 16.40 1.05 17.10 1.13 17.80 1.21 — —
40RMS
008 1400 15.40 1.06 16.20 1.14 16.90 1.22 17.60 1.30 18.30 1.39 — —
1600 16.10 1.24 16.80 1.33 17.50 1.41 18.20 1.50 18.90 1.58 — —
1800 16.80 1.45 17.50 1.54 18.20 1.63 18.90 1.72 19.50 1.80 — —
1200 14.70 0.89 15.50 0.97 16.30 1.05 17.00 1.12 17.70 1.20 — —
1400 15.30 1.05 16.10 1.13 16.80 1.21 17.50 1.29 18.20 1.37 — —
40RMS
010 1600 16.00 1.23 16.70 1.31 17.40 1.40 18.10 1.48 18.80 1.57 — —
1800 16.60 1.43 17.40 1.52 18.10 1.61 18.70 1.70 19.40 1.79 — —
2000 17.30 1.66 18.00 1.76 18.70 1.85 19.40 1.94 — — — —
1450 15.30 1.07 16.10 1.15 16.80 1.24 17.50 1.32 18.20 1.40 18.80 1.48
40RM/RMS
40RM 1670 16.00 1.27 16.70 1.36 17.40 1.44 18.10 1.53 18.80 1.62 19.40 1.70
40RMS 1900 16.70 1.51 17.40 1.60 18.10 1.69 18.80 1.78 19.40 1.87 — —
012 2120 17.50 1.77 18.20 1.86 18.80 1.96 19.50 2.05 — — — —
2350 18.30 2.07 19.00 2.17 19.60 2.27 — — — — — —
1750 14.90 1.42 15.80 1.58 16.60 1.75 17.40 1.93 18.20 2.10 — —
40RM 2050 15.30 1.70 16.20 1.88 17.00 2.07 17.80 2.26 18.50 2.45 — —
40RMS 2350 15.80 2.02 16.60 2.22 17.40 2.43 18.20 2.64 18.90 2.84 — —
014 2650 16.30 2.39 17.10 2.61 17.90 2.83 18.60 3.06 19.30 3.28 — —
2950 16.90 2.80 17.70 3.04 18.40 3.28 19.10 3.53 19.80 3.77 — —
2100 15.00 1.70 15.80 1.90 16.70 2.11 17.40 2.32 18.20 2.53 18.90 2.74
40RM 2450 15.50 2.03 16.30 2.25 17.10 2.47 17.80 2.70 18.60 2.93 19.30 3.16
40RMS 2800 16.00 2.42 16.80 2.66 17.60 2.90 18.30 3.14 19.00 3.38 19.70 3.63
016 3150 16.60 2.87 17.40 3.12 18.10 3.38 18.80 3.64 19.50 3.90 — —
3500 17.20 3.38 18.00 3.65 18.70 3.93 19.40 4.20 — — — —
2900 16.00 2.49 16.80 2.73 17.50 2.97 18.30 3.22 19.00 3.47 19.70 3.72
40RM 3350 16.70 3.08 17.50 3.34 18.20 3.61 18.90 3.87 19.60 4.14 — —
40RMS 3800 17.50 3.77 18.20 4.06 18.90 4.35 19.60 4.64 — — — —
024 4250 18.40 4.59 19.10 4.90 19.80 5.21 — — — — — —
4700 19.30 5.54 20.00 5.87 — — — — — — — —
3500 15.10 4.33 16.10 5.12 17.10 5.98 18.00 6.92 — — — —
40RM 4100 15.30 4.67 16.20 5.39 17.10 6.18 18.00 7.02 — — — —
40RMS 4700 15.70 5.23 16.50 5.91 17.40 6.64 18.20 7.43 — — — —
028 5300 16.20 5.99 17.00 6.65 17.80 7.35 — — — — — —
5900 16.90 6.95 17.60 7.59 18.30 8.27 — — — — — —
4250 15.00 4.55 16.00 5.24 16.80 5.99 17.70 6.79 — — — —
40RM 4950 15.50 5.22 16.30 5.86 17.10 6.56 17.90 7.30 — — — —
40RMS 5650 16.10 6.16 16.90 6.77 17.60 7.43 18.30 8.13 — — — —
034 6350 16.90 7.34 17.50 7.94 18.20 8.58 — — — — — —
7050 17.70 8.79 18.30 9.39 — — — — — — — —
34

UNIT AIRFLOW 0 50 100 150 200 250 300
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 5.34 0.17 7.38 0.25 8.91 0.32 10.20 0.39 11.30 0.46 12.30 0.53 13.30 0.60
1000 6.28 0.24 8.10 0.32 9.53 0.40 10.80 0.48 11.80 0.55 12.80 0.63 13.70 0.70
40RM
007 1150 7.22 0.33 8.86 0.41 10.20 0.50 11.40 0.58 12.40 0.66 13.40 0.73 14.20 0.81
1300 8.17 0.43 9.64 0.52 10.90 0.61 12.00 0.69 13.00 0.77 13.90 0.85 14.80 0.93
1450 9.11 0.55 10.50 0.64 11.60 0.73 12.70 0.82 13.60 0.91 14.50 0.99 15.40 1.07
1000 5.63 0.22 7.61 0.30 9.11 0.38 10.40 0.45 11.50 0.53 12.50 0.61 13.40 0.68
40RM 1200 6.76 0.32 8.49 0.41 9.88 0.50 11.10 0.57 12.10 0.66 13.10 0.74 14.00 0.82
40RMS 1400 7.89 0.46
008 9.42 0.55 10.70 0.64 11.80 0.72 12.80 0.81 13.80 0.89 14.60 0.97
1600 9.01 0.62 10.40 0.71 11.60 0.80 12.60 0.89 13.60 0.98 14.50 1.07 15.30 1.16
1800 10.10 0.80 11.40 0.90 12.50 0.10 13.50 1.09 14.40 1.18 15.20 1.27 16.00 1.36
1200 6.58 0.31 8.35 0.40 9.76 0.49 11.00 0.57 12.00 0.65 13.00 0.73 13.90 0.81
1400 7.67 0.44 9.25 0.54 10.60 0.63 11.70 0.71 12.70 0.80 13.60 0.88 14.50 0.96
40RMS
010 1600 8.77 0.60 10.20 0.70 11.40 0.79 12.50 0.88 13.40 0.97 14.30 1.05 15.20 1.14
1800 9.86 0.78 11.10 0.88 12.30 0.98 13.30 1.07 14.20 1.16 15.10 1.25 15.90 1.34
2000 11.00 0.99 12.10 1.09 13.20 1.19 14.10 1.29 15.00 3.38 15.80 1.48 16.60 1.57
1450 7.58 0.46 9.18 0.56 10.50 0.65 11.60 0.73 12.70 0.82 13.60 0.90 14.50 0.99
40RM/RMS
40RM 1670 8.73 0.63 10.20 0.73 11.40 0.83 12.50 0.92 13.40 1.01 14.30 1.10 15.20 1.18
40RMS 1900 9.93 0.84 11.20 0.95 12.30 1.05 13.30 1.14 14.30 1.24 15.10 1.33 15.90 1.42
012 2120 11.10 1.08 12.20 1.18 13.30 1.29 14.20 1.39 15.10 1.48 15.90 1.58 16.70 1.68
2350 12.30 1.36 13.30 1.17 14.30 1.57 15.20 1.68 16.00 1.78 16.80 1.88 17.60 1.98
1750 5.99 0.27 7.88 0.43 9.41 0.59 10.70 0.75 11.90 0.92 13.00 1.08 14.00 1.25
40RM 2050 7.01 0.41 8.68 0.60 10.10 0.78 11.30 0.96 12.40 1.14 13.50 1.33 14.40 1.51
40RMS 2350 8.04 0.60 9.53 0.81 10.80 1.01 12.00 1.21 13.00 1.41 14.00 1.61 14.90 1.82
014 2650 9.07 0.84 10.40 1.06 11.60 1.28 12.70 1.50 13.70 1.72 14.60 1.94 15.50 2.16
2950 10.10 1.13 11.30 1.37 12.40 1.61 13.40 1.85 14.40 2.08 15.30 2.32 16.10 2.56
2100 6.43 0.37 8.19 0.55 9.65 0.73 10.90 0.92 12.10 1.11 13.10 1.30 14.10 1.50
40RM 2450 7.51 0.57 9.06 0.77 10.40 0.97 11.60 1.18 12.70 1.39 13.70 1.60 14.60 1.81
40RMS 2800 8.58 0.82 9.96 1.05 11.20 1.27 12.30 1.49 13.30 1.72 14.30 1.95 15.10 2.18
016 3150 9.65 1.14 10.90 1.38 12.00 1.63 13.10 1.87 14.00 2.12 14.90 2.36 15.80 2.61
3500 10.70 1.52 11.90 1.78 12.90 2.05 13.90 2.31 14.80 2.58 15.60 2.84 16.40 3.11
2900 8.58 0.86 9.96 1.09 11.20 1.32 12.30 1.55 13.30 1.78 14.20 2.01 15.10 2.25
40RM 3350 9.91 1.28 11.10 1.53 12.20 1.79 13.20 2.04 14.20 2.30 15.10 2.55 15.90 2.81
40RMS 3800 11.30 1.81 12.30 2.09 13.30 2.37 14.30 2.64 15.10 2.93 16.00 3.21 16.80 3.49
024 4250 12.60 2.46 13.60 2.76 14.50 3.07 15.30 3.37 16.10 3.67 16.90 3.98 17.70 4.28
4700 13.90 3.24 14.80 3.57 15.60 3.90 16.40 4.22 17.20 4.55 17.90 4.88 18.60 5.21
3500 6.79 0.84 8.14 1.12 9.42 1.47 10.70 1.89 11.80 2.39 12.90 2.96 14.00 3.61
40RM 4100 7.95 1.29 9.12 1.60 10.20 1.96 11.30 2.38 12.40 2.86 13.40 3.40 14.30 4.00
40RMS 4700 9.12 1.88 10.10 2.21 11.10 2.59 12.10 3.02 13.00 3.49 13.90 4.02 14.80 4.60
028 5300 10.30 2.62 11.20 3.00 12.10 3.37 12.90 3.81 13.80 4.29 14.60 4.82 15.40 5.38
5900 11.40 3.52 12.30 3.90 13.10 4.32 13.90 4.77 14.60 5.26 15.40 5.79 16.10 6.35
4250 7.86 1.33 8.99 1.63 10.10 1.97 11.10 2.37 12.20 2.83 13.20 3.34 14.10 3.92
40RM 4950 9.15 2.03 10.10 2.35 11.10 2.72 12.00 3.12 12.90 3.58 13.80 4.08 14.70 4.62
40RMS 5650 10.40 2.92 11.30 3.27 12.20 3.66 13.00 4.08 13.80 4.54 14.60 5.04 15.40 5.57
034 6350 11.70 4.02 12.50 4.40 13.30 4.81 14.00 5.25 14.70 5.72 15.50 6.23 16.20 6.77
7050 13.00 5.37 13.70 5.77 14.40 6.21 15.10 6.66 15.70 7.15 16.40 7.67 17.10 8.21
35

UNIT AIRFLOW 350 400 450 500 550 600
(L/s)
r/s kW r/s kW r/s kW r/s kW r/s kW r/s kW
850 14.10 0.67 15.00 0.74 15.70 0.81 16.50 0.87 17.20 0.94 — —
1000 14.60 0.77 15.40 0.84 16.10 0.91 16.90 0.98 17.60 1.06 — —
40RM
007 1150 15.10 0.88 15.90 0.96 16.60 1.03 17.30 1.11 18.00 1.18 — —
1300 15.60 1.01 16.40 1.09 17.10 1.17 17.80 1.25 18.40 1.32 — —
1450 16.10 1.15 16.90 1.24 17.60 1.32 18.30 1.40 18.90 1.48 — —
1000 14.30 0.76 15.10 0.83 15.80 0.91 16.60 0.99 17.30 1.06 — —
40RM 1200 14.80 0.90 15.60 0.98 16.40 1.05 17.10 1.13 17.80 1.21 — —
40RMS
008 1400 15.40 1.06 16.20 1.14 16.90 1.22 17.60 1.30 18.30 1.39 — —
1600 16.10 1.24 16.80 1.33 17.50 1.41 18.20 1.50 18.90 1.58 — —
1800 16.80 1.45 17.50 1.54 18.20 1.63 18.90 1.72 19.50 1.80 — —
1200 14.70 0.89 15.50 0.97 16.30 1.05 17.00 1.12 17.70 1.20 — —
1400 15.30 1.05 16.10 1.13 16.80 1.21 17.50 1.29 18.20 1.37 — —
40RMS
010 1600 16.00 1.23 16.70 1.31 17.40 1.40 18.10 1.48 18.80 1.57 — —
1800 16.60 1.43 17.40 1.52 18.10 1.61 18.70 1.70 19.40 1.79 — —
2000 17.30 1.66 18.00 1.76 18.70 1.85 19.40 1.94 — — — —
1450 15.30 1.07 16.10 1.15 16.80 1.24 17.50 1.32 18.20 1.40 18.80 1.48
40RM/RMS
40RM 1670 16.00 1.27 16.70 1.36 17.40 1.44 18.10 1.53 18.80 1.62 19.40 1.70
40RMS 1900 16.70 1.51 17.40 1.60 18.10 1.69 18.80 1.78 19.40 1.87 — —
012 2120 17.50 1.77 18.20 1.86 18.80 1.96 19.50 2.05 — — — —
2350 18.30 2.07 19.00 2.17 19.60 2.27 — — — — — —
1750 14.90 1.42 15.80 1.58 16.60 1.75 17.40 1.93 18.20 2.10 — —
40RM 2050 15.30 1.70 16.20 1.88 17.00 2.07 17.80 2.26 18.50 2.45 — —
40RMS 2350 15.80 2.02 16.60 2.22 17.40 2.43 18.20 2.64 18.90 2.84 — —
014 2650 16.30 2.39 17.10 2.61 17.90 2.83 18.60 3.06 19.30 3.28 — —
2950 16.90 2.80 17.70 3.04 18.40 3.28 19.10 3.53 19.80 3.77 — —
2100 15.00 1.70 15.80 1.90 16.70 2.11 17.40 2.32 18.20 2.53 18.90 2.74
40RM 2450 15.50 2.03 16.30 2.25 17.10 2.47 17.80 2.70 18.60 2.93 19.30 3.16
40RMS 2800 16.00 2.42 16.80 2.66 17.60 2.90 18.30 3.14 19.00 3.38 19.70 3.63
016 3150 16.60 2.87 17.40 3.12 18.10 3.38 18.80 3.64 19.50 3.90 — —
3500 17.20 3.38 18.00 3.65 18.70 3.93 19.40 4.20 — — — —
2900 16.00 2.49 16.80 2.73 17.50 2.97 18.30 3.22 19.00 3.47 19.70 3.72
40RM 3350 16.70 3.08 17.50 3.34 18.20 3.61 18.90 3.87 19.60 4.14 — —
40RMS 3800 17.50 3.77 18.20 4.06 18.90 4.35 19.60 4.64 — — — —
024 4250 18.40 4.59 19.10 4.90 19.80 5.21 — — — — — —
4700 19.30 5.54 20.00 5.87 — — — — — — — —
3500 15.10 4.33 16.10 5.12 17.10 5.98 18.00 6.92 — — — —
40RM 4100 15.30 4.67 16.20 5.39 17.10 6.18 18.00 7.02 — — — —
40RMS 4700 15.70 5.23 16.50 5.91 17.40 6.64 18.20 7.43 — — — —
028 5300 16.20 5.99 17.00 6.65 17.80 7.35 — — — — — —
5900 16.90 6.95 17.60 7.59 18.30 8.27 — — — — — —
4250 15.00 4.55 16.00 5.24 16.80 5.99 17.70 6.79 — — — —
40RM 4950 15.50 5.22 16.30 5.86 17.10 6.56 17.90 7.30 — — — —
40RMS 5650 16.10 6.16 16.90 6.77 17.60 7.43 18.30 8.13 — — — —
034 6350 16.90 7.34 17.50 7.94 18.20 8.58 — — — — — —
7050 17.70 8.79 18.30 9.39 — — — — — — — —
36
LEGEND FACTOR Y-SUPPLIED FILTER PRESSURE DROP - SI
ESP - External Static Pressure
AIRFLOW PRESSURE DROP
Bold indicates field-supplied drive is required. UNIT (L/s) (Pa)
Plain type indicates standard motor and standard drive. 850 13
Underline indicates a different motor and drive combination other than 40RM 1150 20
the standard motor and standard drive combination is required. Refer to 007 1450 28
fan motor and drive tables, pages 52-69, to complete the selection.
40RM
40RMS 1000 17
NOTES: 008 1400 27
1. Maximum allowable fan speed is 18.3 r/s for unit sizes 028 and 034; 1800 38
20 r/s for all other sizes.
2. Fan performance is based on deductions for wet coil, clean 25.4 mm 1200 21
40RMS 1600 32
filters, and unit casing. See table below for factory-supplied filter pres 010
sure drop. 2000 45
3. For 60 Hz units, the medium-static drive and standard motor combi 40RM
nation is not available for 028 size. For 50 Hz units, the medium- 40RMS 1450 28
static drive and standard motor combination is not available for 012 1900 42
016-028 sizes. Use alternate motor if medium-static drive is required 2350 56
for these sizes.
40RM 1750 15
40RMS 2350 24
014 2950 33
40RM
40RMS 2100 20
016 2800 30
3500 42
40RM/RMS
40RM 2900 32
40RMS 3800 47
024 4700 64
40RM 3500 36
40RMS 4700 55
028 5900 76
40RM 4250 47
40RMS 5650 71
034 7050 98
37
ACCESSORY PLENUM AIR THROW DATA — ENGLISH ACCESSORY PLENUM AIR THROW DATA — SI
(Ft) (m)
AIRFLOW VANE DEFLECTION AIRFLOW VANE DEFLECTION

UNIT (Cfm) UNIT (L/s)
Straight 211⁄2° 45° Straight 211⁄2° 45°
40RM 40RM
007 2,400 39 33 24 007 1150 11.71 9.91 7.20
40RM 40RM
40RMS 3,000 45 38 28 40RMS 1400 13.87 11.71 8.63
008 008
40RMS 3,400 49 41 30 40RMS 1600 14.98 12.53 9.17

010 010
40RM 40RM
40RMS 40RMS
012 4,000 55 46 33 012 1900 16.65 13.93 9.99
40RM 40RM
40RMS 5,000 45 38 28 40RMS 2350 13.77 11.63 8.57
014 014
40RM 40RM
40RMS 6,000 50 43 31 40RMS 2800 15.41 13.25 9.55
016 016
40RM 40RM
40RM/RMS
40RMS 8,000 60 51 37 40RMS 3800 18.17 15.44 11.20

024 024
40RM 40RM
40RMS 10,000 76 65 47 40RMS 4700 23.26 19.89 14.38
028 028
40RM 40RM
40RMS 12,000 85 72 52 40RMS 5650 25.97 22.00 15.89
034 034
NOTE: Throw distances shown are for 75 fpm terminal velocity. Use NOTE: Throw distances shown are for 0.381 m/sec terminal velocity.
the following multipliers to determine throw values for other terminal Use the following multipliers to determine throw values for other termi
velocities. nal velocities.
TERMINAL VELOCITY THROW FACTOR TERMINAL VELOCITY THROW FACTOR

(Fpm) (m/sec)
50 X 1.50 0.254 X 1.50
100 X 0.75 0.508 X 0.75
150 X 0.50 0.762 X 0.50
38
ACCESSORY PRESSURE DROP — ENGLISH
(in. wg)
AIRFLOW DISCHARGE RETURN AIR HEATING COILS

UNIT (Cfm) PLENUM GRILLE ECONOMIZER
Hot Water Steam Electric
40RM 1,800 0.06 0.01 0.10 0.10 0.04 0.05
007 2,400 0.10 0.01 0.16 0.16 0.06 0.07
3,000 0.14 0.02 0.23 0.23 0.10 0.09
40RM 2,250 0.09 0.01 0.15 0.15 0.06 0.06
40RMS 3,000 0.14 0.02 0.23 0.23 0.10 0.09
008
3,750 0.21 0.03 0.35 0.35 0.15 0.15
2,550 0.11 0.02 0.18 0.18 0.07 0.07
40RMS 3,400 0.17 0.03 0.28 0.28 0.12 0.13
010 4,250 0.24 0.04 0.41 0.41 0.19 0.19
40RM 3,000 0.14 0.02 0.23 0.23 0.10 0.09
40RMS 4,000 0.22 0.04 0.37 0.37 0.17 0.17
012 5,000 0.32 0.06 0.53 0.53 0.26 0.28
40RM 3,750 0.07 0.01 0.11 0.11 0.04 0.05
40RMS 5,000 0.12 0.02 0.17 0.17 0.07 0.07
014 6,250 0.17 0.02 0.25 0.25 0.11 0.11
40RM
4,500 0.10 0.01 0.15 0.15 0.06 0.06
40RMS 6,000 0.16 0.02 0.23 0.23 0.10 0.09
016
40RM/RMS
7,500 0.23 0.03 0.33 0.33 0.15 0.15
40RM 6,000 0.16 0.02 0.23 0.23 0.10 0.09
40RMS 8,000 0.26 0.04 0.37 0.37 0.17 0.17
024 10,000 0.37 0.06 0.53 0.53 0.26 0.28
40RM 7,500 0.15 0.02 0.28 0.28 0.09 0.06
40RMS 10,000 0.24 0.03 0.44 0.44 0.16 0.09
028 12,500 0.34 0.05 0.63 0.63 0.24 0.14
40RM 9,000 0.20 0.03 0.37 0.37 0.13 0.08
40RMS 12,000 0.32 0.05 0.59 0.59 0.22 0.14
034 15,000 0.46 0.07 0.85 0.85 0.34 0.21
ACCESSORY PRESSURE DROP — SI

(Pa)
AIRFLOW DISCHARGE RETURN AIR HEATING COILS

UNIT ECONOMIZER
(L/s) PLENUM GRILLE Hot Water Steam Electric
40RM 850 15 2 25 25 9 12
007 1150 25 3 41 41 16 18
1450 36 5 60 60 26 23
40RM 1000 20 2 33 33 12 13
40RMS
008 1400 34 5 57 57 24 22
1800 51 8 85 85 39 39
40RMS 1200 26 5 44 44 18 17
010 1600 42 7 70 70 31 32
2000 61 10 101 101 48 47
40RM 1450 36 5 60 60 26 23
40RMS
012 1900 56 10 93 93 43 43
2350 79 15 132 132 65 69
40RM 1750 18 2 26 26 10 12
40RMS 2350 29 5 43 43 17 17
014 2950 43 5 62 62 26 27
40RM 2100 24 2 36 36 14 15
40RMS 2800 39 5 57 57 24 22
016 3500 56 7 82 82 37 37
40RM 2900 41 5 60 60 26 23
40RMS 3800 64 10 93 93 43 43
024 4700 91 15 132 132 65 69
40RM 3500 37 5 67 67 22 15
40RMS 4700 59 7 109 109 39 22
028 5900 86 12 157 157 60 35
40RM 4250 50 7 92 92 32 20
40RMS 5650 80 12 147 147 56 35
034 7050 114 17 210 210 85 52
39
Electrical data
STANDARD MOTORS
FAN MOTOR POWER SUPPLY

UNIT V*-PH-Hz VOLTAGE Minimum
LIMITS Hp (kW) FLA Circuit MOCP
Amps
208/230-1-60 187-253 1.3 (0.97) 7.6 9.5 15
208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RM 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
007 575-3-60 518-632 1.0 (0.75) 1.4 8.0 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RM
40RMS 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
008 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 15
40RMS 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
010 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
40RM/RMS
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15

208/230-3-60 187-253 2.4 (1.79) 5.2 6.5 20
40RM 460-3-60 414-506 2.4 (1.79) 2.6 3.3 15
40RMS
012 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RM 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
40RMS 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
014 230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 3.7 (2.76) 10.2 12.8 20
40RM 460-3-60 414-506 3.7 (2.76) 4.8 6.0 15
40RMS
016 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 5.0 (3.73) 15.3/12.8 19.1/16.0 30/25
40RM 460-3-60 414-506 5.0 (3.73) 6.4 8.0 15
40RMS 575-3-60 518-632 5.0 (3.73) 5.1 6.4 15
024 230-3-50 207-253 5.0 (3.73) 15.2 19.0 30
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 7.5 (5.59) 22.4/19.4 28.0/24.3 50/40
40RM 460-3-60 414-506 7.5 (5.59) 9.7 12.1 20
40RMS 575-3-60 518-632 7.5 (5.59) 7.8 9.8 15
028 230-3-50 207-253 7.5 (5.59) 22.8 28.5 50
400-3-50 360-440 7.5 (5.59) 11.4 14.3 25
208/230-3-60 187-253 10.0 (7.46) 29.3/26.8 36.6/33.5 60/60
40RM 460-3-60 414-506 10.0 (7.46) 13.4 16.8 30
40RMS 575-3-60 518-632 10.0 (7.46) 10.3 12.9 20
034 230-3-50 207-253 10.0 (7.46) 32.2 40.3 70
400-3-50 360-440 10.0 (7.46) 16.1 20.1 30
40
ALTERNATE MOTORS
FAN MOTOR POWER SUPPLY

UNIT V*-PH-Hz VOLTAGE Minimum
LIMITS Hp (kW) FLA Circuit MOCP
Amps
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RM 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
007 575-3-60 518-632 2.0 (1.49) 2.3 2.9 15
230-3-50 207-253 2.4 (1.79) 5.2 6.5 15
400-3-50 360-440 2.4 (1.79) 2.6 3.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 15
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RM
40RMS 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
008 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-1-60 187-253 2.4 (1.79) 11.0 13.8 20
208/230-3-60 187-253 2.9 (2.16) 7.5 9.4 15
40RMS 460-3-60 414-506 2.9 (2.16) 3.4 4.3 15
010 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
230-3-50 207-253 2.9 (2.16) 7.5 9.4 15
40RM/RMS
400-3-50 360-440 2.9 (2.16) 3.4 4.3 15
208/230-3-60 187-253 3.7 (2.76) 10.2 12.8 20
40RM 460-3-60 414-506 3.7 (2.76) 4.8 6.0 15
40RMS
012 575-3-60 518-632 3.0 (2.24) 3.8 4.8 15
230-3-50 207-253 5.0 (3.73) 15.2 19.0 30
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 3.7 (2.76) 10.2 12.7 20
40RM 460-3-60 414-506 3.7 (2.76) 4.8 6.0 15
40RMS 575-3-60 518-632 5.0 (3.73) 5.1 6.4 15
014 230-3-50 207-253 5.0 (3.73) 15.2 19.0 30
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 5.0 (3.73) 15.3/12.8 19.1/16.0 30/25
40RM 460-3-60 414-506 5.0 (3.73) 6.4 8.0 15
40RMS
016 575-3-60 518-632 5.0 (3.73) 5.1 6.4 15
230-3-50 207-253 5.0 (3.73) 15.2 19.0 30
400-3-50 360-440 5.0 (3.73) 7.6 9.5 15
208/230-3-60 187-253 7.5 (5.59) 22.4/19.4 28.0/24.3 50/40
40RM 460-3-60 414-506 7.5 (5.59) 9.7 12.1 20
40RMS 575-3-60 518-632 7.5 (5.59) 7.8 9.8 15
024 230-3-50 207-253 7.5 (5.59) 22.8 28.5 50
400-3-50 360-440 7.5 (5.59) 11.4 14.3 25
208/230-3-60 187-253 10.0 (7.46) 29.3/26.8 36.6/33.5 60/60
40RM 460-3-60 414-506 10.0 (7.46) 13.4 16.8 30
40RMS 575-3-60 518-632 10.0 (7.46) 10.3 12.9 20
028 230-3-50 207-253 10.0 (7.46) 32.2 40.3 60
400-3-50 360-440 10.0 (7.46) 16.1 20.1 30
LEGEND Determine maximum deviation from average voltage.

FLA — Full Load Amps (AB) 397 − 393 = 4 v
MOCP — Maximum Overcurrent Protection (BC) 403 − 397 = 6 v
*Motors are designed for satisfactory operation within 10% of nominal voltages (AC) 397 − 396 = 1 v
shown. Voltages should not exceed the limits shown in the Voltage Limits column. Maximum deviation is 6 v.
NOTES:
1. Minimum circuit amps (MCA) and MOCP values are calculated in accordance Determine percent voltage imbalance.
with NEC (National Electrical Code) (U.S.A. standard), Article 440. 6
2. Motor FLA values are established in accordance with UL (Underwriters’ Labo % Voltage Imbalance = 100 x
ratories) Standard 1995 (U.S.A. standard). 397
3. Unbalanced 3-Phase Supply Voltage = 1.5%
Never operate a motor where a phase imbalance in supply voltage is greater
than 2%. Use the following formula to determine the percentage of voltage This amount of phase imbalance is satisfactory because it is below the maxi
imbalance. mum allowable 2%.
% Voltage Imbalance
max voltage deviation from average voltage

IMPORTANT: If the supply voltage phase imbalance is more than 2%, con
= 100 x
tact your local electric utility company immediately.
average voltage
EXAMPLE: Supply voltage is 400-3-50.
AB = 393 v
BC = 403 v
AC = 396 v
393 + 403 + 396

Average Voltage =
3
1192
=
3
= 397
41
Electrical data (cont)
ELECTRIC HEATER DATA
ELECTRIC HEATER(S)
HEATER FAN MOTOR
UNIT V-PH-Hz Nominal Actual Capacity (kW) MCA* MOCP*
PART NO. FLA
Hp kW FLA Capacity (kW) Stage 1 Stage 2 Total
1.3† 0.97 7.6 5 3.8 — 3.8 10.4 22.5 25
2.4† 1.79 11.0 5 3.8 — 3.8 10.4 26.8 35
208-3-60 2.4 1.79 5.2 5 3.8 — 3.8 10.4 19.5 20
2.9 2.16 7.5 5 3.8 — 3.8 10.4 22.4 25
3.7 2.76 10.2 5 3.8 — 3.8 10.4 25.8 30
1.3† 0.97 7.6 5 5.0 — 5.0 12.0 24.5 25
CAELHEAT001A00 2.4† 1.79 11.0 5 5.0 — 5.0 12.0 28.8 35
240-3-60 2.4 1.79 5.2 5 5.0 — 5.0 12.0 21.5 25
2.9 2.16 7.5 5 5.0 — 5.0 12.0 24.4 25
3.7 2.76 10.2 5 5.0 — 5.0 12.0 27.8 30
2.4 1.79 5.2 5 5.0 — 5.0 12.0 21.5 25
240-3-50 2.9 2.16 7.5 5 5.0 — 5.0 12.0 24.4 25
5.0 3.73 15.2 5 5.0 — 5.0 12.0 34.0 40
2.4 1.79 2.6 5 5.0 — 5.0 6.00 10.8 15
480-3-60 2.9 2.16 3.4 5 5.0 — 5.0 6.00 11.8 15
3.7 2.76 4.8 5 5.0 — 5.0 6.00 13.5 15
CAELHEAT002A00
2.4 1.79 2.6 5 3.5 — 3.5 5.00 9.5 15
400-3-50 2.9 2.16 3.4 5 3.5 — 3.5 5.00 10.5 15
5.0 3.73 7.6 5 3.5 — 3.5 5.00 15.8 20
1.0 0.75 1.4 5 5.0 — 5.0 5.00 8.0 15
CAELHEAT003A00 575-3-60 2.0 1.49 2.3 5 5.0 — 5.0 5.00 9.2 15
3.0 2.24 3.8 5 5.0 — 5.0 5.00 11.0 15
40RM/RMS
1.3† 0.97 7.6 10 7.5 — 7.5 20.8 35.6 40

2.4† 1.79 11.0 10 7.5 — 7.5 20.8 39.8 40
208-3-60 2.4 1.79 5.2 10 7.5 — 7.5 20.8 32.6 35
2.9 2.16 7.5 10 7.5 — 7.5 20.8 35.4 40
3.7 2.76 10.2 10 7.5 — 7.5 20.8 38.8 40
1.3† 0.97 7.6 10 10.0 — 10.0 24.1 39.6 40
CAELHEAT004A00 2.4† 1.79 11.0 10 10.0 — 10.0 24.1 43.8 50
240-3-60 2.4 1.79 5.2 10 10.0 — 10.0 24.1 36.6 40
2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
3.7 2.76 10.2 10 10.0 — 10.0 24.1 42.8 50
40RM007-012 2.4 1.79 5.2 10 10.0 — 10.0 24.1 36.6 40
40RMS008-012 240-3-50 2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
5.0 3.73 15.2 10 10.0 — 10.0 24.1 49.1 50
2.4 1.79 2.6 10 10.0 — 10.0 12.0 18.3 20
480-3-60 2.9 2.16 3.4 10 10.0 — 10.0 12.0 19.3 20
3.7 2.76 4.8 10 10.0 — 10.0 12.0 21.0 25
CAELHEAT005A00
2.4 1.79 2.6 10 6.9 — 6.9 10.0 15.8 20
400-3-50 2.9 2.16 3.4 10 6.9 — 6.9 10.0 16.8 20
5.0 3.73 7.6 10 6.9 — 6.9 10.0 22.0 25
1.0 0.75 1.4 10 10.0 — 10.0 10.0 14.3 15
CAELHEAT006A00 575-3-60 2.0 1.49 2.3 10 10.0 — 10.0 10.0 15.4 20
3.0 2.24 3.8 10 10.0 — 10.0 10.0 17.3 20
1.3† 0.97 7.6 15 11.3 — 11.3 31.3 48.6 50
2.4† 1.79 11.0 15 11.3 — 11.3 31.3 52.9 60
208-3-60 2.4 1.79 5.2 15 11.3 — 11.3 31.3 45.6 50
2.9 2.16 7.5 15 11.3 — 11.3 31.3 48.5 50
3.7 2.76 10.2 15 11.3 — 11.3 31.3 51.9 60
1.3† 0.97 7.6 15 15.0 — 15.0 36.1 54.6 60
CAELHEAT007A00 2.4† 1.79 11.0 15 15.0 — 15.0 36.1 58.9 60
240-3-60 2.4 1.79 5.2 15 15.0 — 15.0 36.1 51.6 60
2.9 2.16 7.5 15 15.0 — 15.0 36.1 54.5 60
3.7 2.76 10.2 15 15.0 — 15.0 36.1 57.9 60
2.4 1.79 5.2 15 15.0 — 15.0 36.1 51.6 60
240-3-50 2.9 2.16 7.5 15 15.0 — 15.0 36.1 54.5 60
5.0 3.73 15.2 15 15.0 — 15.0 36.1 64.1 70
2.4 1.79 2.6 15 15.0 — 15.0 18.0 25.8 30
480-3-60 2.9 2.16 3.4 15 15.0 — 15.0 18.0 26.8 30
3.7 2.76 4.8 15 15.0 — 15.0 18.0 28.6 30
CAELHEAT008A00
2.4 1.79 2.6 15 10.4 — 10.4 15.0 22.0 25
400-3-50 2.9 2.16 3.4 15 10.4 — 10.4 15.0 23.0 25
5.0 3.73 7.6 15 10.4 — 10.4 15.0 28.3 30
1.0 0.75 1.4 15 15.0 — 15.0 15.1 20.6 25
CAELHEAT009A00 575-3-60 2.0 1.49 2.3 15 15.0 — 15.0 15.1 21.7 25
3.0 2.24 3.8 15 15.0 — 15.0 15.1 23.6 25
42
ELECTRIC HEATER DATA (cont)
ELECTRIC HEATER(S)
HEATER FAN MOTOR
PART NO. FLA
1.3† 0.97 7.6 25 11.3 7.5 18.8 52.1 74.7 80
2.4† 1.79 11.0 25 11.3 7.5 18.8 52.1 78.9 80
208-3-60 2.4 1.79 5.2 25 11.3 7.5 18.8 52.1 71.7 80
2.9 2.16 7.5 25 11.3 7.5 18.8 52.1 74.5 80
3.7 2.76 10.2 25 11.3 7.5 18.8 52.1 77.9 80
1.3† 0.97 7.6 25 15.0 10.0 25.0 60.1 84.7 90
CAELHEAT010A00 2.4† 1.79 11.0 25 15.0 10.0 25.0 60.1 88.9 90
240-3-60 2.4 1.79 5.2 25 15.0 10.0 25.0 60.1 81.7 90
2.9 2.16 7.5 25 15.0 10.0 25.0 60.1 84.6 90
3.7 2.76 10.2 25 15.0 10.0 25.0 60.1 87.9 90
40RM007-012 2.4 1.79 5.2 25 15.0 10.0 25.0 60.1 81.7 90
40RMS008-012 240-3-50 2.9 2.16 7.5 25 15.0 10.0 25.0 60.1 84.6 90
5.0 3.73 15.2 25 15.0 10.0 25.0 60.1 94.2 100
2.4 1.79 2.6 25 15.0 10.0 25.0 30.1 40.8 50
480-3-60 2.9 2.16 3.4 25 15.0 10.0 25.0 30.1 41.8 50
3.7 2.76 4.8 25 15.0 10.0 25.0 30.1 43.6 50
CAELHEAT011A00
2.4 1.79 2.6 25 10.4 6.9 17.4 25.1 34.6 25
400-3-50 2.9 2.16 3.4 25 10.4 6.9 17.4 25.1 35.6 40
5.0 3.73 7.6 25 10.4 6.9 17.4 25.1 40.8 50
1.0 0.75 1.4 25 15.0 10.0 25.0 25.1 33.1 35
CAELHEAT012A00 575-3-60 2.0 1.49 2.3 25 15.0 10.0 25.0 25.1 34.3 35
3.0 2.24 3.8 25 15.0 10.0 25.0 25.1 36.1 40
40RM/RMS
2.4† 1.79 11.0 35 15.0 11.3 26.3 73.0 105.0 110
2.4 1.79 5.2 35 15.0 11.3 26.3 73.0 97.7 100
208-3-60
2.9 2.16 7.5 35 15.0 11.3 26.3 73.0 100.6 110
3.7 2.76 10.2 35 15.0 11.3 26.3 73.0 104.0 110
2.4† 1.79 11.0 35 20.0 15.0 35.0 84.2 119.0 125
CAELHEAT013A00 2.4 1.79 5.2 35 20.0 15.0 35.0 84.2 111.7 125
240-3-60 2.9 2.16 7.5 35 20.0 15.0 35.0 84.2 114.6 125
3.7 2.76 10.2 35 20.0 15.0 35.0 84.2 118.0 125
40RM008,012 2.4 1.79 5.2 35 20.0 15.0 35.0 84.2 111.7 125
40RMS008-012 240-3-50 2.9 2.16 7.5 35 20.0 15.0 35.0 84.2 114.6 125
5.0 3.73 15.2 35 20.0 15.0 35.0 84.2 124.2 125
2.4 1.79 2.6 35 20.0 15.0 35.0 42.1 55.9 60
480-3-60 2.9 2.16 3.4 35 20.0 15.0 35.0 42.1 56.9 60
3.7 2.76 4.8 35 20.0 15.0 35.0 42.1 58.6 60
CAELHEAT014A00
2.4 1.79 2.6 35 13.9 10.4 24.3 35.1 47.1 50
400-3-50 2.9 2.16 3.4 35 13.9 10.4 24.3 35.1 48.1 50
5.0 3.73 7.6 35 13.9 10.4 24.3 35.1 53.4 60
2.0 1.49 2.3 35 20.0 15.0 35.0 35.1 46.8 50
CAELHEAT015A00 575-3-60
3.0 2.24 3.8 35 20.0 15.0 35.0 35.1 48.7 50
LEGEND 2. The following equation converts kW of heat energy to Btuh:

FLA — Full Load Amps kW x 3,412 = Btuh.
Hp — Horsepower 3. Heater contactor coils are 24 v and require 8 va holding current.
MCA — Minimum Circuit Amps 4. Electric heaters are tested and ETL approved at maximum total external static
MOCP — Maximum Overcurrent Protection (Amps) pressure of 1.9 in. wg.
5. MCA and MOCP values apply to both standard and alternate factory-supplied
*Values shown are for single-point connection of electric heat accessory and air motors.
handler.
†Single-phase motors. All other motors are 3-phase.
NOTES:
1. Electrical resistance heaters are rated at 240 v, 480 v, or 575 v. To determine
heater capacity (kW) at unit nameplate multiply the 240-v, 480-v, or 575-v ca
pacity (kW) by the factor shown in the table below for the unit voltage.
HEATER ACTUAL HEATER VOLTAGE

RATING
VOLTAGE 200 208 230 240 400 440 460 480 550 575 600
240 0.694 0.751 0.918 1 — — — — — — —
480 — — — — 0.694 0.84 0.918 1 — — —
575 — — — — — — — — 0.915 1 1.089
43
ELECTRIC HEATER(S)
HEATER FAN MOTOR
PART NO. FLA
2.9 2.16 7.5 10 7.5 — 7.5 20.8 35.4 40
208-3-60 3.7 2.76 10.2 10 7.5 — 7.5 20.8 38.8 40
5.0 3.73 15.3 10 7.5 — 7.5 20.8 45.1 50
7.5 5.59 22.4 10 7.5 — 7.5 20.8 54.4 70
2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
CAELHEAT016A00 240-3-60 3.7 2.76 10.2 10 10.0 — 10.0 24.1 42.8 50
5.0 3.73 12.8 10 10.0 — 10.0 24.1 46.1 50
7.5 5.59 19.4 10 10.0 — 10.0 24.1 54.4 70
2.9 2.16 7.5 10 10.0 — 10.0 24.1 39.4 40
240-3-50 5.0 3.73 15.2 10 10.0 — 10.0 24.1 49.1 50
7.5 5.59 22.8 10 10.0 — 10.0 24.1 58.6 70
2.9 2.16 3.4 10 10.0 — 10.0 12.0 19.3 20
480-3-60 3.7 2.76 4.8 10 10.0 — 10.0 12.0 21.0 25
5.0 3.73 6.4 10 10.0 — 10.0 12.0 23.0 25
CAELHEAT017A00 7.5 5.59 9.7 10 10.0 — 10.0 12.0 27.2 30
2.9 2.16 3.4 10 6.9 — 6.9 10.0 16.8 20
400-3-50 5.0 3.73 7.6 10 6.9 — 6.9 10.0 22.0 25
7.5 5.59 11.4 10 6.9 — 6.9 10.0 26.8 35
3.0 2.24 3.8 10 10.0 — 10.0 10.0 17.3 20
CAELHEAT018A00 575-3-60 5.0 3.73 5.1 10 10.0 — 10.0 10.0 19.6 20
7.5 5.59 7.8 10 10.0 — 10.0 10.0 22.1 25
2.9 2.16 7.5 20 15.0 — 15.0 41.7 61.5 70
40RM/RMS
208-3-60 3.7 2.76 10.2 20 15.0 — 15.0 41.7 65.4 70

5.0 3.73 15.3 20 15.0 — 15.0 41.7 71.1 80
7.5 5.59 22.4 20 15.0 — 15.0 41.7 79.6 90
2.9 2.16 7.5 20 20.0 — 20.0 48.1 69.5 70
CAELHEAT019A00 3.7 2.76 10.2 20 20.0 — 20.0 48.1 73.4 80
240-3-60
5.0 3.73 12.8 20 20.0 — 20.0 48.1 76.1 80
7.5 5.59 19.4 20 20.0 — 20.0 48.1 84.4 90
2.9 2.16 7.5 20 20.0 — 20.0 48.1 69.5 70
40RM014-024 240-3-50 5.0 3.73 15.2 20 20.0 — 20.0 48.1 79.1 80
40RMS014-024 7.5 5.59 22.8 20 20.0 — 20.0 48.1 86.4 90
2.9 2.16 3.4 20 20.0 — 20.0 24.1 34.3 35
480-3-60 3.7 2.76 4.8 20 20.0 — 20.0 24.1 36.1 40
5.0 3.73 6.4 20 20.0 — 20.0 24.1 39.1 40
CAELHEAT020A00 7.5 5.59 9.7 20 20.0 — 20.0 24.1 43.2 50
2.9 2.16 3.4 20 13.9 — 13.9 20.0 29.3 30
400-3-50 5.0 3.73 7.6 20 13.9 — 13.9 20.0 45.1 50
7.5 5.59 11.4 20 13.9 — 13.9 20.0 49.2 50
3.0 2.24 3.8 20 20.0 — 20.0 20.1 29.9 30
CAELHEAT021A00 575-3-60 5.0 3.73 5.1 20 20.0 — 20.0 20.1 31.5 35
7.5 5.59 7.8 20 20.0 — 20.0 20.1 34.9 35
2.9 2.16 7.5 30 15.0 7.5 22.5 62.5 87.5 90
3.7 2.76 10.2 30 15.0 7.5 22.5 62.5 90.9 100
208-3-60
5.0 3.73 15.3 30 15.0 7.5 22.5 62.5 97.2 100
7.5 5.59 22.4 30 15.0 7.5 22.5 62.5 106.2 110
2.9 2.16 7.5 30 20.0 10.0 30.0 72.2 99.6 100
CAELHEAT022A00 240-3-60 3.7 2.76 10.2 30 20.0 10.0 30.0 72.2 103.0 110
5.0 3.73 12.8 30 20.0 10.0 30.0 72.2 106.2 110
7.5 5.59 19.4 30 20.0 10.0 30.0 72.2 114.5 125
2.9 2.16 7.5 30 20.0 10.0 30.0 72.2 99.6 100
240-3-50 5.0 3.73 15.2 30 20.0 10.0 30.0 72.2 109.2 110
7.5 5.59 22.8 30 20.0 10.0 30.0 72.2 118.7 125
2.9 2.16 3.4 30 20.0 10.0 30.0 36.1 49.4 50
480-3-60 3.7 2.76 4.8 30 20.0 10.0 30.0 36.1 51.1 60
5.0 3.73 6.4 30 20.0 10.0 30.0 36.1 53.1 60
CAELHEAT023A00 7.5 5.59 9.7 30 20.0 10.0 30.0 36.1 57.2 60
2.9 2.16 3.4 30 13.9 6.9 20.8 30.1 41.8 50
400-3-50 5.0 3.73 7.6 30 13.9 7.9 20.8 30.1 47.1 50
7.5 5.59 11.4 30 13.9 7.9 20.8 30.1 51.8 60
3.0 2.24 3.8 30 20.0 10.0 30.0 30.1 42.4 50
CAELHEAT024A00 575-3-60 5.0 3.73 5.1 30 20.0 10.0 30.0 30.1 44.0 50
7.5 5.59 7.8 30 20.0 10.0 30.0 30.1 47.4 50
44
ELECTRIC HEATER(S)
HEATER FAN MOTOR
PART NO. FLA
3.7 2.76 10.2 50 22.6 15.0 37.6 104.3 143.1 150
208-3-60 5.0 3.73 15.3 50 22.6 15.0 37.6 104.3 149.5 150
7.5 5.59 22.4 50 22.6 15.0 37.6 104.3 158.4 175
3.7 2.76 10.2 50 30.0 20.0 50.0 120.3 163.1 175
CAELHEAT025A00 240-3-60 5.0 3.73 12.8 50 30.0 20.0 50.0 120.3 166.4 175
7.5 5.59 19.4 50 30.0 20.0 50.0 120.3 174.6 200
2.9 2.16 7.5 50 30.0 20.0 50.0 120.3 159.7 175
240-3-50 5.0 3.73 15.2 50 30.0 20.0 50.0 120.3 169.4 175
40RM016,024 7.5 5.59 22.8 50 30.0 20.0 50.0 120.3 178.9 200
40RMS016,024
3.7 2.76 4.8 50 30.0 20.0 50.0 60.1 81.2 90
480-3-60 5.0 3.73 6.4 50 30.0 20.0 50.0 60.1 83.2 90
7.5 5.59 9.7 50 30.0 20.0 50.0 60.1 87.3 90
CAELHEAT026A00
2.9 2.16 3.4 50 20.8 13.9 34.7 50.1 66.9 70
400-3-50 5.0 3.73 7.6 50 20.8 13.9 34.7 50.1 72.1 80
7.5 5.59 11.4 50 20.8 13.9 34.7 50.1 76.9 80
3.0 2.24 3.8 50 30.0 20.0 50.0 50.2 67.5 70
CAELHEAT027A00 575-3-60 5.0 3.73 5.1 50 30.0 20.0 50.0 50.2 69.1 70
7.5 5.59 7.8 50 30.0 20.0 50.0 50.2 72.5 80
208-3-60 7.5 5.59 22.4 20 15.0 — 15.0 41.7 80.1 90
10.0 7.46 29.3 20 15.0 — 15.0 41.7 88.7 100
CAELHEAT028A00 7.5 5.59 19.4 20 20.0 — 20.0 48.1 84.3 90
240-3-60 10.0 7.46 26.8 20 20.0 — 20.0 48.1 94.0 110
40RM/RMS
240-3-50 7.5 5.59 22.8 20 20.0 — 20.0 48.1 88.6 90
10.0 7.46 32.2 20 20.0 — 20.0 48.1 100.4 110
480-3-60 7.5 5.59 9.7 20 20.0 — 20.0 24.1 42.2 50
10.0 7.46 13.4 20 20.0 — 20.0 24.1 46.8 50
CAELHEAT029A00
7.5 5.59 11.4 20 13.9 — 13.9 20.0 39.3 40
400-3-50
10.0 7.46 16.1 20 13.9 — 13.9 20.0 45.2 50
7.5 5.59 7.8 20 20.0 — 20.0 20.1 34.9 35
CAELHEAT030A00 575-3-60
40RM028,034 10.0 7.46 10.3 20 20.0 — 20.0 20.1 38.0 40
40RMS028,034 7.5 5.59 22.4 40 15.0 15.0 30.0 83.4 132.2 150
208-3-60 10.0 7.46 29.3 40 15.0 15.0 30.0 83.4 140.9 150
CAELHEAT031A00 240-3-60 7.5 5.59 19.4 40 20.0 20.0 40.0 96.2 144.5 150
10.0 7.46 26.8 40 20.0 20.0 40.0 96.2 153.8 175
240-3-50 7.5 5.59 22.8 40 20.0 20.0 40.0 96.2 148.8 150
10.0 7.46 32.2 40 20.0 20.0 40.0 96.2 160.5 175
7.5 5.59 9.7 40 20.0 20.0 40.0 48.1 72.3 80
480-3-60
10.0 7.46 13.4 40 20.0 20.0 40.0 48.1 76.9 80
CAELHEAT032A00
400-3-50 7.5 5.59 11.4 40 13.9 13.9 27.8 40.1 64.4 70
10.0 7.46 16.1 40 13.9 13.9 27.8 40.1 70.2 80
7.5 5.59 7.8 40 20.0 20.0 40.0 40.2 60.0 60
CAELHEAT033A00 575-3-60 10.0 7.46 10.3 40 20.0 20.0 40.0 40.2 63.1 70

handler.
NOTES:

RATING
VOLTAGE 200 208 230 240 400 440 460 480 550 575 600
240 0.694 0.751 0.918 1 — — — — — — —
480 — — — — 0.694 0.84 0.918 1 — — —
575 — — — — — — — — 0.915 1 1.089
45
ELECTRIC HEATER(S)
HEATER FAN MOTOR
PART NO. FLA
208-3-60 7.5 5.59 22.4 50 22.6 15.0 37.6 104.3 158.3 175
10.0 7.46 29.3 50 22.6 15.0 37.6 104.3 166.9 175
CAELHEAT034A00 7.5 5.59 19.4 50 30.0 20.0 50.0 120.3 174.6 200
240-3-60 10.0 7.46 26.8 50 30.0 20.0 50.0 120.3 183.9 200
240-3-50 7.5 5.59 22.8 50 30.0 20.0 50.0 120.3 178.9 200
10.0 7.46 32.2 50 30.0 20.0 50.0 120.3 190.6 200
480-3-60 7.5 5.59 9.7 50 30.0 20.0 50.0 60.1 87.3 90
10.0 7.46 13.4 50 30.0 20.0 50.0 60.1 91.9 100
CAELHEAT035A00
7.5 5.59 11.4 50 20.8 13.9 34.7 50.1 76.9 80
400-3-50 10.0 7.46 16.1 50 20.8 13.9 34.7 50.1 82.8 90
CAELHEAT036A00 575-3-60 7.5 5.59 7.8 50 30.0 20.0 50.0 50.2 72.5 80
40RM028,034 10.0 7.46 10.3 50 30.0 20.0 50.0 50.2 75.6 80
40RMS028,034 7.5 5.59 22.4 70 30.0 22.6 52.6 145.9 173.9 175
208-3-60 10.0 7.46 29.3 70 30.0 22.6 52.6 145.9 182.6 200
CAELHEAT037A00 240-3-60 7.5 5.59 19.4 70 40.0 30.0 70.0 168.4 192.6 200
10.0 7.46 26.8 70 40.0 30.0 70.0 168.4 201.9 225
7.5 5.59 22.8 70 40.0 30.0 70.0 168.4 196.9 200
240-3-50 10.0 7.46 32.2 70 40.0 30.0 70.0 168.4 208.6 225
7.5 5.59 9.7 70 40.0 30.0 70.0 84.2 96.3 100
480-3-60 10.0 7.46 13.4 70 40.0 30.0 70.0 84.2 100.9 110
CAELHEAT038A00
40RM/RMS
400-3-50 7.5 5.59 11.4 70 27.8 20.8 48.6 70.2 84.4 90

10.0 7.46 16.1 70 27.8 20.8 48.6 70.2 90.3 100
CAELHEAT039A00 575-3-60 7.5 5.59 7.8 70 40.0 30.0 70.0 70.3 80.0 90
10.0 7.46 10.3 70 40.0 30.0 70.0 70.3 83.2 90

handler.
NOTES:

RATING
VOLTAGE 200 208 230 240 400 440 460 480 550 575 600
240 0.694 0.751 0.918 1 - - - - - - -
480 - - - - 0.694 0.84 0.918 1 - - -
575 - - - - - - - - 0.915 1 1.089
46
Typical piping and wiring
VERTICAL INST ALLA TION - 40RM (TYPICAL)
40RM/RMS
LEGEND NOTES:
NEC - National Electrical Code 1. All piping must follow standard refrigerant piping techniques. Refer to Carrier System Design
TXV - Thermostatic Expansion Valve Manual for details.
2. All wiring must comply with the applicable local and national codes.
Piping 3. Wiring and piping shown are general points-of-connection guides only and are not intended
*Field supplied. for, or to include all details for, a specific installation.
²Double riser may be required. Consult con- 4. Liquid line solenoid valve (solenoid drop control) is recommended to prevent refrigerant
densing unit product data catalog for migration to the compressor.
details. 5. Internal factory-supplied TXVs not shown.
47
Typical piping and wiring (cont)
HORIZONT AL INST ALLA TION - 40RM (TYPICAL)

40RM/RMS
LEGEND 2. All wiring must comply with the applicable local and national codes.
NEC - National Electrical Code 3. Wiring and piping shown are general points-of-connection guides
TXV - Thermostatic Expansion Valve only and are not intended for, or to include all details for, a spe
cific installation.
*Accessory item. 4. Liquid line solenoid valve (solenoid drop control) is recommended
²Field supplied. to prevent refrigerant migration to the compressor.
5. Internal factory-supplied TXVs not shown.
NOTES:
1. All piping must follow standard refrigerant piping techniqes. Refer
to Carrier System Design Manual for details.
48
WIRE ROUTING, BASE UNIT - 40RM, 40RMS
40RM/RMS
WIRE ROUTING, UNIT WITH ELECTRIC HEAT - 40RM, 40RMS
NEC - National Electrical Code
49
Typical piping and wiring (cont)
CONTROL WIRING SCHEMA TIC - TYPICAL

40RM/RMS
LEGEND
EQUIP - Equipment
GND - Ground
HC - Heater Contactor
HTR - Heater Element
IFC - Indoor Fan Contactor
IFM - Indoor Fan Motor
TB - Terminal Block
Factory Wiring
Field Wiring
50
Application data
Operating limits The air handler fan must always be operating when the
Maximum fan speed - 40RM007-024, condensingunit is operating.
40RMS008-024 . . . . . . . . . . . . . . . . 1200 rpm (20 r/s) Ductwork should be sized according to unit size, not
Maximum fan speed - 40RM and building load. For larger units with two fans, a split duct
40RMS028,034 . . . . . . . . . . . . . . . . 1100 rpm (18.3 r/s) transition is recommendedat the fan outlets, but a plenum
can be usedwith slight reduction in external static pressure
General capability.
Select equipment to match or to be slightly lessthan peak
load. This providesbetter humidity control, lessunit cycling, For variable air volume (VAV) systems with supply-to
and lesspart-load operation. Equipment should be selected return air recycling, usethe equipment room as a return air
to perform at no lessthan 300 cfm/ton (40 L/s per kW). plenum.
FACTOR Y-INST ALLED NOZZLE AND DISTRIBUTOR DATA
FEEDER TUBES
TXV DISTRIBUTOR NOZZLE
UNIT Qty...Part No.* Qty...Part No.*
PER DISTRIBUTOR
Qty...Part No.
Qty...Size (in.)
40RM007 1...XVE-5 1...1116 12...1/4 1...E5
40RM008 1...SVE-8 1...1126 15...1/4 1...C6
40RM012 2...XVE-4 2...1115 9...1/4 2...E4
40RM014 2...XVE-5 2...1115 9...1/4 2...E5
40RM/RMS
40RM016 2...XVE-8 2...1116 12...1/4 2...E6
40RM024 2...XVE-10 2...1116 13...1/4 2...E8
40RM028 2...EBSVE-11 2...1126 15...1/4 2...C10
40RM034 2...SVE-15 2...1126 18...1/4 2...C12
*Sporlan Valve Co. part numbers shown.
51
Application data (cont)
FAN MOTOR DATA
STANDARD MOTOR - ENGLISH
40RM 40RM 40RM

40RM 40RM 40RM 40RM
40RM 40RMS 40RMS 40RMS 40RMS
UNIT 40RMS 40RMS 40RMS 40RMS
007 008 010 012 016
014 024 028 034
208/230-1-60
Speed (rpm) 1725 1725 1725 - - - - - -
Hp 1.3 2.4 2.4 - - - - - -
Frame (NEMA) 56Y 56Y 56Y - - - - - -
Shaft Dia (in.) 5/8 5/8 5/8 - - - - - -
208/230-3-60 and 460-3-60
Speed (rpm) 1725 1725 1725 1725 1725 1725 1745 1745 1745
Hp 2.4 2.4 2.4 2.4 2.9 3.7 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y S184T S213T S215T
Shaft Dia (in.) 5/8 5/8 5/8 5/8 7/8 7/8 11/8 13/8 13/8
575-3-60
Speed (rpm) 1725 1725 1725 1725 1725 1725 1745 1755 1755
Hp 1.0 2.0 2.0 2.0 3.0 3.0 5.0 7.5 10.0
Frame (NEMA) 56 56HZ 56HZ 56HZ 56HZ 56HZ 184T S213T D215T
40RM/RMS
Shaft Dia (in.) 5/8 7/8 7/8 7/8 7/8 7/8 11/8 13/8 13/8
230-3-50 and 400-3-50
Speed (rpm) 1425 1425 1425 1425 1425 1425 1425 1425 1425
Hp 2.4 2.4 2.4 2.9 2.9 2.9 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y 184T S213T S215T
Shaft Dia (in.) 5/8 5/8 5/8 7/8 7/8 7/8 11/8 13/8 13/8
NEMA - National Electrical Manufacturers Association (U.S.A.)
ALTERNA TE MOTOR - ENGLISH
40RM 40RM 40RM

40RM 40RM 40RM
UNIT 007 008 010 012 40RMS 016 40RMS 40RMS
014 024 028
208/230-1-60
Speed (rpm) 1725 1725 1725 - - - - -
Hp 2.4 2.4 2.4 - - - - -
Frame (NEMA) 56Y 56Y 56Y - - - - -
Shaft Dia (in.) 5/8 7/8 7/8 - - - - -
208/230-3-60 and 460-3-60
Speed (rpm) 1725 1725 1725 1725 1725 1725 1745 1745
Hp 2.9 2.9 2.9 3.7 3.7 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y Y56Y Y56Y S184T S213T S215T
Shaft Dia (in.) 7/8 7/8 7/8 7/8 7/8 11/8 13/8 13/8
575-3-60
Speed (rpm) 1725 1725 1725 1725 1745 1745 1755 1750
Hp 2.0 3.0 3.0 3.0 5.0 5.0 7.5 10.0
Frame (NEMA) 56HZ 56HZ 56HZ 56HZ 184T 184T S213T D215T
Shaft Dia (in.) 7/8 7/8 7/8 7/8 11/8 11/8 13/8 13/8
230-3-50 and 400-3-50
Speed (rpm) 1425 1425 1425 1425 1425 1425 1425 1425
Hp 2.4 2.9 2.9 5.0 5.0 5.0 7.5 10.0
Frame (NEMA) 56Y 56Y 56Y S184T S184T S184T S213T S215T
Shaft Dia (in.) 7/8 7/8 7/8 7/8 11/8 11/8 13/8 13/8
52
FAN MOTOR DRIVE (cont)
STANDARD MOTOR - SI
40RM 40RM 40RM

40RM 40RM 40RM 40RM
UNIT 40RM 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS
007 008 010 012 014 016 024 028 034
208/230-1-60
Speed (r/s) 28.75 28.75 28.75 - - - - - -
Shaft kW 0.97 1.79 1.79 - - - - - -
Frame (NEMA) 56Y 56Y 56Y - - - - - -
Shaft Dia (mm) 15.9 15.9 15.9 - - - - - -
208/230-3-60 and 460-3-60
Speed (r/s) 28.75 28.75 28.75 28.75 28.75 28.75 29.08 29.08 29.08
Shaft kW 1.79 1.79 1.79 1.79 2.16 2.76 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y S184T S213T S215T
Shaft Dia (mm) 15.9 15.9 15.9 15.9 22.2 22.2 28.6 34.9 34.9
575-3-60
Speed (r/s) 28.75 28.75 28.75 28.75 28.75 28.75 29.08 29.25 29.25
Shaft kW 0.75 1.49 1.49 1.49 2.24 2.24 3.73 5.60 7.46
Frame (NEMA) 56 56HZ 56HZ 56HZ 56HZ 56HZ 184T S213T S215T
40RM/RMS
Shaft Dia (mm) 15.9 22.2 22.2 22.2 22.2 22.2 28.6 34.9 34.9
230-3-50 and 400-3-50
Speed (r/s) 23.75 23.75 23.75 23.75 23.75 23.75 23.75 23.75 23.75
Shaft kW 1.79 1.79 1.79 2.16 2.16 2.16 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y 56Y 56Y 56Y 184T S213T S215T
Shaft Dia (mm) 15.9 15.9 15.9 22.2 22.2 22.2 28.6 34.9 34.9
ALTERNA TE MOTOR - SI
40RM 40RM 40RM

40RM 40RM 40RM
UNIT 40RM 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS
007 008 010 012 016
014 024 028
208/230-1-60
Speed (r/s) 28.75 28.75 28.75 - - - - -
Shaft kW 1.79 1.79 1.79 - - - - -
Frame (NEMA) 56Y 56Y 56Y - - - - -
Shaft Dia (mm) 15.9 22.2 22.2 - - - - -
208/230-3-60 and 460-3-60
Speed (r/s) 28.75 28.75 28.75 28.75 28.75 29.08 29.08 29.17
Shaft kW 2.16 2.16 2.16 2.76 2.76 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y Y56Y Y56Y S184T S213T S215T
Shaft Dia (mm) 22.2 22.2 22.2 22.2 22.2 28.6 34.9 34.9
575-3-60
Speed (r/s) 28.75 28.75 28.75 28.75 29.08 29.08 29.25 29.17
Shaft kW 1.50 2.24 2.24 2.24 3.73 3.73 5.60 7.46
Frame (NEMA) 56HZ 56HZ 56HZ 56HZ 184T 184T S213T D215T
Shaft Dia (mm) 22.2 22.2 22.2 22.2 28.6 28.6 34.9 34.9
230-3-50 and 400-3-50
Speed (r/s) 23.75 23.75 23.75 23.75 23.75 23.75 23.75 23.75
Shaft kW 1.79 2.16 2.16 3.73 3.73 3.73 5.60 7.46
Frame (NEMA) 56Y 56Y 56Y S184T S184T S184T S213T S215T
Shaft Dia (mm) 22.2 22.2 22.2 22.2 28.6 28.6 34.9 34.9
53
STANDARD DRIVE DATA, 6 0 Hz - ENGLISH
40RM 40RM 40RM

40RM 40RMS 40RMS 40RMS 40RM 40RMS 40RM 40RM 40RM
UNIT 007 008 010 012 40RMS 016 40RMS 40RMS 40RMS
014 024 028 034
MOTOR DRIVE
Motor Pulley Pitch Diameter
(in.) 2.4-3.4 2.8-3.8 2.8-3.8 3.4-4.4 2.8-3.8 2.8-3.8 3.7-4.7 4.3-5.3 4.3-5.3
Pulley Factory Setting
2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (in.) 8.8 8.8 8.8 8.8 9.0 9.0 9.4 11.0 11.0
Pulley Bore (in.) 1 1 1 1 1 7/16 1 7/16 1 7/16 1 15/16 1 15/16
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-A 2-B 2-B* 2-B*
Belt Pitch (in.) 40.3 41.3 41.3 42.3 42.3 42.3 41.8 (2) 42.8 (2) 42.8
(2) 43.8 (2) 43.8
FAN SPEEDS (rpm)
Factory Setting 568 647 647 764 632 632 771 752 752
Range 470-666 549-745 549-745 666-863 537-728 537-728 679-863 682-841 674-831
Max Allowable Speed (rpm) 1200 1200 1200 1200 1200 1200 1200 1100 1100
Change per 1/2 Turn of
40RM/RMS
Moveable Motor Pulley 19.6 19.6 19.6 19.7 19.1 19.1 15.3 13.1 13.1
Flange
MAX FULL TURNS FROM
CLOSED POSITION 5 5 5 5 5 5 6 6 6
SHAFTS CENTER DISTANCE 10.44 10.44 10.44 10.44 10.44 10.44 9.12 6.67 6.67
(in.) 12.32 12.32 12.32 12.32 12.32 12.32 10.99 9.43 9.43
*Four belts shipped with unit. Use correct set of 2 belts sized according to the pulley setting.
MEDIUM-ST ATIC DRIVE DATA, 6 0 Hz - ENGLISH
40RM 40RM 40RM 40RM 40RM 40RM 40RM

007 008 010 012 014 016 024 028 034
MOTOR DRIVE
Motor Pulley Pitch Diameter 3.4-4.4 3.4-4.4 3.4-4.4 3.4-4.4 3.4-4.4 3.7-4.7 4.3-5.3 4.3-5.3 4.3-5.3
(in.)
Full Turns Open 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 1 7/16 1 7/16 1 7/16 1 15/16 1 15/16
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-B 2-B 2-B* 2-B*
(2) 38.8 (2) 38.8
Belt Pitch (in.) 42.3 40.3 40.3 40.3 41.3 41.8 41.8
(2) 39.8 (2) 39.8
FAN SPEEDS (rpm)
Factory Setting 764 841 841 841 820 842 881 881 881
Range 666-863 733-949 733-949 733-949 715-926 742-943 798-984 798-984 798-984
Flange
MAX FULL TURNS FROM
5 5 5 5 5 6 6 6 6
CLOSED POSITION
(in.) 12.32 12.32 12.32 12.32 12.32 12.32 10.99 9.43 9.43
54
HIGH-ST ATIC DRIVE DATA, 6 0 Hz - ENGLISH
40RM 40RM 40RM

014 024 028 034
MOTOR DRIVE
(in.) 3.4-4.4 3.4-4.4 3.4-4.4 3.4-4.4 3.7-4.7 4.3-5.3 4.3-5.3 4.3-5.3 4.3-5.3
Full Turns Open 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Pitch Dia (in.) 7.0 6.0* 6.0 6.0 7.4 7.9 7.4 8.6 8.6
Pulley Bore (in.) 1 1 1 1 1 7/16 1 7/16 1 7/16 1 15/16 1 15/16
Belt No. Section 1-A 1-A 1-A 1-A 1-B 1-B 2-B 2-B 2-B
Belt Pitch (in.) 41.3 37.3 37.3 37.3 39.8 39.8 36.8 37.8 37.8
FAN SPEEDS (rpm)
Factory Setting 961 1121 1121 1121 979 1060 1118 1024 1024
Range 838 978 978 978 873 950 1014 873 873
1084 1200*² 1200² 1200² 1096 1171 1200² 1075 1075
40RM/RMS
Flange
MAX FULL TURNS FROM
(in.) 12.32 12.32 12.32 12.32 12.32** 10.99 10.02 9.43 9.43
*Values for 3-phase motor shown. For single-phase motor, pulley pitch diameter is 7 in.
and resulting fan speed is 837-1096 rpm.
²It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT
exceed 1200 rpm.
**575-v unit has a center distance of 9.16-10.99.
STANDARD DRIVE DATA, 5 0 Hz - ENGLISH
40RM 40RM 40RM

40RM 40RM 40RM 40RM
UNIT 40RM 40RMS 40RMS 40RMS
40RMS
40RMS
40RMS 40RMS 40RMS
007 008 010 012
014
016
024 028 034
MOTOR DRIVE
(in.) 2.4-3.4 2.8-3.8 2.8-3.8 3.4-4.4 3.4-4.4 3.4-4.4 4.3-5.3 4.3-5.3 4.3-5.3
Full Turns Open 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 1 7/16 1 7/16 1 7/16 1 15/16 1 15/16
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-A 1-B 2-B 2-B
Belt Pitch (in.) 39.3 39.3 39.3 40.3 42.3 42.3 41.8 43.8 43.8
FAN SPEEDS (rpm)
Factory Setting 517 588 588 695 618 618 795 622 622
Range 428-606 499-677 449-677 606-784 538-697 538-697 713-878 557-687 557-687
Flange
MAX FULL TURNS FROM
(in.) 12.32 12.32 12.32 12.32 12.32 12.32 10.99 9.43 9.43
55
MEDIUM-ST ATIC DRIVE DATA, 5 0 Hz - ENGLISH
40RM 40RM 40RM

014 024 028 034
MOTOR DRIVE
(in.) 3.4-4.4 3.4-4.4 3.4-4.4 3.4-4.4 3.4-4.4 3.7-4.7 4.0-5.0 4.3-5.3 4.3-5.3
2.5 2.5 2.5 2.5 2.5 3.0 2.5 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 1 7/16 1 7/16 1 7/16 1 15/16 1 15/16
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-B 2-A 2-B 2-B
Belt Pitch (in.) 40.3 41.3 41.3 37.3 39.3 39.8 36.8 39.8 39.8
FAN SPEEDS (rpm)
Factory Setting 695 794 794 926 741 756 916 728 728
Range 606-784 692-896 692-896 808-1045 646-836 667-848 814-1018 652-803 652-803
40RM/RMS
Flange
MAX FULL TURNS FROM
(in.) 12.32 12.32 12.32 12.32 12.32 10.99 10.99 9.43 9.43
HIGH-ST ATIC DRIVE DATA, 5 0 Hz - ENGLISH
40RM 40RM 40RM

40RM 40RM 40RM 40RM
007 008 010 012 014 016 024 028 034
MOTOR DRIVE
3.4-4.4 3.4-4.4 3.4-4.4 4.0-5.0 3.4-4.4 4.0-5.0 4.0-5.0 4.3-5.3 4.3-5.3
(in.)
Pulley Factory Setting 2.5 2.5 2.5 3.0 2.5 3.0 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (in.) 1 1 1 1 1 7/16 1 7/16 1 7/16 1 15/16 1 15/16
Belt No. Section 1-A 1-A 1-A 1-A 2-A 2-A 2-A 2-B 2-B
Belt Pitch (in.) 37.3 37.3 37.3 36.3 36.3 39.3 34.3 36.8 37.8
FAN SPEEDS (rpm)
Factory Setting 926 1010 1010 1166 926 916 1002 855 795
808 881 881 1036 808 814 891 766 713
Range 1045 1140 1140 1200* 1045 1018 1113 944 878
Flange
MAX FULL TURNS FROM
5 5 5 6 5 6 6 6 6
CLOSED POSITION
SHAFTS CENTER DISTANCE 10.44 10.44 10.44 916 9.16 9.16 8.16 6.67 6.67
(in.) 12.32 12.32 12.32 10.99 10.99 10.99 10.02 9.43 9.43
*It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT
exceed 1200 rpm.
56
STANDARD DRIVE DATA, 6 0 Hz - SI
40RM 40RM 40RM

40RM 40RM 40RM 40RM
014 024 028 034
MOTOR DRIVE
Motor Pulley Pitch Diameter 61.0 71.1 71.1 86.4 71.1 71.1 94.0 109.2 109.2
(mm) 86.4 96.5 96.5 111.8 96.5 96.5 119.4 134.6 134.6
Full Turns Open 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
FAN DRIVE
Pulley Pitch Dia (mm) 224 224 224 224 229 229 239 279 279
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-A 2-B 2-B* 2-B*
(2) 1087 (2) 1087
Belt Pitch (mm) 1024 1049 1049 1074 1074 1074 1062 (2) 1113 (2) 1113
FAN SPEEDS (r/s)
Factory Setting 9.5 10.8 10.8 12.7 10.5 10.5 12.9 12.5 12.5
Range 7.8-11.1 9.2-12.4 9.2-12.4 11.1-14.4 9.0-12.1 9.0-12.1 11.3-14.4 11.4-14.0 11.2-13.9
Max Allowable Speed (r/s) 20.0 20.0 20.0 20.0 20.0 20.0 20.0 18.3 18.3
40RM/RMS
Flange
MAX FULL TURNS FROM
SHAFTS CENTER DISTANCE
(mm) 265-313 265-313 265-313 265-313 265-313 265-313 232-279 169-240 169-240
MEDIUM-ST ATIC DRIVE DATA, 6 0 Hz - SI
40RM 40RM 40RM

014 024 028 034
MOTOR DRIVE
(mm) 111.8 111.8 111.8 111.8 111.8 119.4 134.6 134.6 134.6
Full Turns Open 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-B 2-B 2-B* 2-B*
(2) 986 (2) 986
Belt Pitch (mm) 1074 1024 1024 1024 1049 1062 1062 (2) 1011 (2) 1011
FAN SPEEDS (r/s)
Factory Setting 12.7 14.0 14.0 14.0 13.7 14.0 14.7 14.7 14.7
11.1 12.2 12.2 12.2 11.9 12.4 13.3 13.3 13.3
Range 14.4 15.8 15.8 15.8 15.4 15.7 16.4 16.4 16.4
Flange
MAX FULL TURNS FROM
(mm) 265-313 265-313 265-313 265-313 265-313 265-313 232-279 169-240 169-240
57
HIGH-ST ATIC DRIVE DATA, 6 0 Hz - SI
40RM 40RM 40RM

014 024 028 034
MOTOR DRIVE
(mm) 111.8 111.8 111.8 111.8 119.4 134.6 134.6 134.6 134.6
Pulley Factory Setting 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm) 178 152* 152 152 188 201 188 203 203
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. Section 1-A 1-A 1-A 1-A 1-B 1-B 2-B 2-B 2-B
Belt Pitch (mm) 1049 947 947 947 1011 1011 935 935 960
FAN SPEEDS (r/s)
Factory Setting 16.0 18.7 18.7 18.7 16.3 17.7 18.6 17.1 17.1
14.0 16.3 16.3 16.3 14.4 15.8 16.9 14.6 14.6
Range 18.1 20.0*² 20.0² 20.0² 18.3 19.5 20.0² 17.9 17.9
40RM/RMS
Flange
MAX FULL TURNS FROM
SHAFTS CENTER DISTANCE 265-313 265-313 265-313 265-313 265-313** 232-279 207-255 169-240 169-240
(mm)
*Values for 3-phase motor shown. For single-phase motor, pulley pitch diameter is 178 mm
and resulting fan speed is 14.0-18.3 r/s.
²It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT exceed
20 r/s.
**575-v unit has a center distance of 233-279.
STANDARD DRIVE DATA, 5 0 Hz - SI
40RM 40RM 40RM

40RM 40RM 40RM 40RM
UNIT 40RM 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS 40RMS
007 008 010 012 016
014 024 028 034
MOTOR DRIVE
(mm) 86.4 96.5 96.5 111.8 111.8 111.8 134.6 134.6 134.6
2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0
Full Turns Open
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-A 1-B 2-B 2-B
Belt Pitch (mm) 998 998 998 1024 1074 1074 1062 1113 1113
FAN SPEEDS (r/s)
Factory Setting 8.6 9.8 9.8 11.6 10.3 10.3 13.3 10.4 10.4
7.1 8.3 8.3 10.1 9.0 9.0 11.9 9.3 9.3
Range
10.1 11.3 11.3 13.1 11.6 11.6 14.6 11.5 11.5
Flange
MAX FULL TURNS FROM
265-313 265-313 265-313 265-313 265-313 265-313 232-279 169-240 169-240
(mm)
58
MEDIUM-ST ATIC DRIVE DATA, 5 0 Hz - SI
40RM 40RM 40RM

014 024 028 034
MOTOR DRIVE
(mm) 111.8 111.8 111.8 111.8 111.8 119.4 127.0 134.6 134.6
Full Turns Open 2.5 2.5 2.5 2.5 2.5 3.0 2.5 3.0 3.0
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. Section 1-A 1-A 1-A 1-A 1-A 1-B 2-A 2-B 2-B
Belt Pitch (mm) 1024 1049 1049 947 998 1011 922 1011 1011
FAN SPEEDS (r/s)
Factory Setting 11.6 13.2 13.2 15.4 12.4 12.6 15.3 12.1 12.1
10.1 11.5 11.5 13.5 10.8 11.1 13.6 10.9 10.9
Range 13.1 14.9 14.9 17.4 13.9 14.1 17.0 13.4 13.4
40RM/RMS
Flange
MAX FULL TURNS FROM
SHAFTS CENTER DISTANCE 265-313 265-313 265-313 265-313 265-313 232-279 232-279 169-240 169-240
(mm)
HIGH-ST ATIC DRIVE DATA, 5 0 Hz - SI
40RM 40RM 40RM 40RM 40RM 40RM 40RM

UNIT 007 008 010 012
40RMS
016
40RMS 40RMS 40RMS
014 024 028 034
MOTOR DRIVE
(mm) 111.8 111.8 111.8 127.0 111.8 127.0 127.0 134.6 134.6
Full Turns Open 2.5 2.5 2.5 3.0 2.5 3.0 3.0 3.0 3.0
FAN DRIVE
Pulley Bore (mm) 25.4 25.4 25.4 25.4 36.5 36.5 36.5 49.2 49.2
Belt No. Section 1-A 1-A 1-A 1-A 2-A 2-A 2-A 2-B 2-B
Belt Pitch (mm) 947 947 947 922 922 998 871 935 960
FAN SPEEDS (r/s)
Factory Setting 15.4 16.8 16.8 19.4 15.4 15.3 16.7 14.3 13.3
Range 13.5 14.7 14.7 17.3 13.5 13.6 14.9 12.8 11.9
17.4 19.0 19.0 20.0* 17.4 17.0 18.6 15.7 14.6
Flange
MAX FULL TURNS FROM
(mm) 265-313 265-313 265-313 234-279 232-279 232-279 207-255 169-240 169-240
*It is possible to adjust drive so that fan speed exceeds maximum allowable. DO NOT
exceed 20 r/s.
59
Guide specifications
Commercial Packaged Air-Handling Unit A. Base Unit (Painted):

1. Cabinetshall be constructed of zinc coated steel
HVAC Guide Specifications and polyester powder painted to protect them
SizeRange: 2,400 to 12,000 CFM (1150 to 5650 L/s), from corrosion in the harsh Middle Eastern climate
Nominal Airflow 6 t o 3 0 Tons (21 to and also to increase the colour life in high ultra
105 kW), Nominal Cooling violet (UV) radiation regions.
2. Cabinet panels shall be fully insulated with 1/2 in.
Carrier Model Numbers: 40RM (Direct-Expansion Coil)
40RMS (Chilled Water Coil) (12.7-mm) fire-retardant material.
3. Unit shall contain PVC condensate drain pans for
Part 1 - GENERAL both vertical and horizontal applications. Drain
1.01 SYSTEM DESCRIPTION pans shallhave connectionson right and left sides
A. Indoor, packaged air-handling unit for use in commer of unit to facilitate field connection. Drain pans
cial split systems.Unit shall have a multiposition de shall have the ability to be sloped toward the right
sign and shall be capable of horizontal or vertical or left side of the unit to prevent standing water
installation on a floor or in a ceiling, with or without from accumulatingin pans.
ductwork. (Only vertical units are to be applied with 4. Unit shall have factory-supplied 1-in. (25.4 mm)
out ductwork.) washable-type filters installed upstream from the
B. Unit with direct-expansioncoil shall be used in a re cooling coil. Filter access shall be from the front
frigerant circuit with a matching air-cooled con of the unit.
40RM/RMS
densing unit. Unit with chilled water coil shall be used B. Coils:
in a chilled water circuit. Coils shall consist of 3 rows (40RM, 40RMS), of
1.02 QUALITY ASSURANCE coppertubes with sine-wave aluminum fins bonded
A. Coils shall be designed & tested in accordance with to the tubes by mechanical expansion. Suction and
ASHRAE 15 Safety Code for Mechanical Refrigera liquid line connectionsor supply and discharge con
tion (U.S.A.), latest edition. nections shallbe made on the same side of the coil.
B. Unit shall be constructed in accordance with ETL 1. Direct-expansioncoilsshallfeaturefactory-installed
(U.S.A.) and ETL, Canada, standardsand shall carry thermostatic expansion valves (TXVs) for refrig
the ETL and ETL, Canada, labels. erant control. The TXVs shall be capable of ex
C. Unit insulation and adhesive shall comply with ternal adjustment. Direct-expansion heat pump
NFPA-90A (U.S.A.)requirements for flame spread coils shall have a factory-installedbypassline and
and smoke generation. check valve assemblyaround the TXVs to allow
liquid flow from the coil to the outdoor unit during
the heating mode. Coil tubing shall be internally
rifled to maximize heat transfer.
D. Unit shall be manufactured in a facility registered to 2. Chilled water coils shall be rated for an operating
the ISO 9002 manufacturing quality standard. pressureof not lessthan 300 psig (2069 kPag).
E. Direct-expansionand chilled water coils shallbe burst C. Operating Characteristics:
and leak tested at 435 psi (2999 kPa).
Unit shall be capable of providing cfm (L/s)
1.03 DELIVERY AND STORAGE airflow at an external static pressureof in. wg
Units shall be stored and handled per manufacturer's (kPag).
recommendations. D. Motor:
Par t 2 - Products Fan motor of the size and electrical characteristics
2.01 EQUIPMENT specified on the equipment scheduleshall be factory
supplied and installed.
Indoor mounted, draw-thru, packaged air-handling unit
that can be used in a suspended horizontal configu Motors rated at 1.3 through 3.7 hp (0.97 through
ration or a vertical configuration. Unit shall consistof 2.76 kW) shall have internal thermal overload pro
forward-curved belt-driven centrifugal fan(s), motor & tection. Motors rated at 5, 7 1/2 , and 10 hp (3.73,
drive assembly,prewired fan motor contactor, factory 5.60, and 7.46 kW) shall be protected by a circuit
installedrefrigerant metering devices(direct-expansion breaker.
coil units), cooling coil, 1-in. (25.4-mm) washable air
filters, and condensate drain pans for vertical or hori
zontal configurations.
60
E. Factory-InstalledOptions: 6. Unit Subbase:
1. Alternate Motor and Drive: Subbaseassemblyshall be factory supplied for
An alternate motor and/or medium- or high-static field installation. Subbase shall elevate floor-
drive shall be available to meet the airflow and mounted vertical units to provide access for
external static pressure requirements specified correct condensate drain connection.
on the equipment schedule. 7. Economizer:
Economizerfor ventilation or ``free'' cooling shall
F. Field-InstalledAccessories (ordered from NAO): be factory provided for field installation on either
1. Hot Water Coil: return air opening of air handler. For free cool
Coil shallbe 2-row, U-bendcoil with copper tubes ing applications, economizershallbe compatible
and aluminum plate fins bonded to the tubes by with separate thermostat; economizer dampers
mechanicalexpansion. Coil shall be mounted in shall open when outdoor air enthalpy is suitable
a galvanizedsteel housing that shall be fastened for free cooling. Economizershall be compatible
to the unit's fan deck for blow-thru heating op with separate CO2 sensor accessory; economizer
eration. Coil shall have maximum working pres dampersshall open when indoor CO2 level rises
sure of 150 psig (1034 kPag). abovepredetermined setpoint. Economizershall
include enthalpy control and damper actuator.
2. Steam Distributing Coil:
8. Thermostat Controls:
Coil shallconsistof one row of copper tubeswith
aluminum plate fins, and shall have inner steam a. Debonair programmablemulti-stagethermo
40RM/RMS
distributing tubes.Coil shallbe mounted in a gal statwith 7-dayclock, holiday scheduling,large
vanizedsteelhousingand shallbe fastenedto the ThermoglowŸ display, remote sensorcapa
unit's fan deck for blow-thru heating operation. bility, and Title 24 compliance.
Coil shall have maximum working pressure of b. TEMP System programmable communicat
175 psig at 400 F (1207 kPag at 204.4 C). ing multi-stage thermostat with fan switch,
3. Electric Heaters: time clock, LCD display,ÉF/ÉC capability,and
CCN compatiblity.
Heaters for nominal 240, 480, or 575-volt,
3-phase, 60 Hz; and 240, 400-volt, 3 phase, c. CommercialElectronicThermostatwith 7-day
50 Hz power supply shallbe factory-suppliedfor time clock, auto-changeover, multi-stageca
field installationasshown on the equipmentdraw pability, and large LCD temperature display.
ings. Electricheat assemblyshallbe ETL (U.S.A.) d. Non-programmablethermostatwith fan switch
and ETL, Canada, agency approved, and shall subbase.
have single-point power wiring. Heater assem 9. Overhead SuspensionPackage:
bly shallincludecontactorswith 24-V coils, power
wiring, 24-v control wiring terminal blocks, and Package shall include necessary brackets to
a hinged accesspanel. Electric heaters shall not support units in a horizontal ceiling installation.
be used with air discharge plenum. 10. CO2 Sensor:
4. Air Discharge Plenum: Sensorshallprovide the ability to signalthe econo
Plenum shall be factory supplied to provide free mizer to open when the spaceCO2 levelexceeds
blow air distribution for vertical floor-mounted the predetermined set point. Sensor shall have
units. A grille with moveable vanes for hori the capability of being connected to Comfort
zontal or vertical airflow adjustment shall be System relay pack or to economizer using field
included. Plenum shall be field-assembledand supplied and -installed Honeywell dc adapter
field-installedon the unit's fan deck for blow-thru no. Q769C1004.
air distribution. Plenum shall not be used with 11. CondensateDrain Trap:
electric heaters. Trap shall have transparent, serviceabledesign
5. Return Air Grille: for easycleaning. Kit shallinclude overflow shut
Grille shall be factory supplied for field installa off switch and wiring harnessfor connection to
tion on the unit's return air opening. an alarm if desired.
61
NOTES
40RM/RMS
62
NOTES
40RM/RMS
63
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
2008 Form 40RM-04PD Replaces: 40RM-3PD

40RM PDF

Uploaded by

Copyright:

Available Formats

40RM PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

40RM PDF

Uploaded by

Copyright:

Available Formats

40RM/RMS

Packaged Air-Handling Units

horizontally or vertically without

· Standard double skin units for a

better indoor air quality (IAQ)

· Polyester powder painted zinc coated

range of applications than competi­

tive packagedair handler lines

· Economizer accessory provides ven­

bonded fins provide peak heat

40RM007S-012S · Standard factory-installed thermo­

40RMS008S-012S static expansion valves(TXVs) on

· Standard sloped drain pans

The unique combination of features multiposition design. Units can be bearings.

is deliveredto the occupied space. modifications. All units have drain-

installed and running quickly. The DX

coils have factory-installedTXVs with

in the areas where ultra-violet (UV)

cal operation by simply reposition­

Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Options and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21,22

Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-39

Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-46

Typical Piping and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-50

Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-59

Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60,61

40RM Commercial Packaged Factory-Installed Options

Cooling Coil ED Painted, Standard Motor and

Nominal Capacity Tons (kW) FD Painted, Standard Motor and

Voltage Designation (V-Ph-Hz)

3 208/230-1-60 (007-010 sizes only) WD Painted, Alternate Motor and

460-3-60 (sizes 016 with YC or WD options and

UNIT SIZE AVAILABILITY

OPERATING WEIGHT (lb)

Base Unit (Double skin) with TXV

Nominal Airflow (cfm) 2400

230-3-50, 400-3-50 1425

Operating charge (lb)

Max Working Pressure (psig) 435

Split Type...Percentage - - Face...50/50

Max Working Pressure (psig at 400 F)

HOT WATER COIL**

Max Working Pressure (psig)

DX Coil - Suction (ODF)

Hot Water Coil, Out (MPT) 1...11/2 1...11/2 1...2

Condensate (PVC) 1...1 ODM/1 IDF

FILTERS Washable - Factory Supplied

Quantity...Size (in.) 4...16 x 24 x 1

Access Location Front

FILTERS Washable - Factory Supplied

TXV - Thermostatic Expansion Valve

²Units are shipped without refrigerant charge.

**All piping sizes are OD inches; equivalent sizes in millimeters follow:

***Please contact your local Carrier sales office for availability.

OPERATING WEIGHT (lb)

Base Unit (Double skin)

Nominal Airflow (cfm) 3000

230-3-50, 400-3-50 1425

range of applications than competi

· Economizer accessory provides ven

40RM007S-012S · Standard factory-installed thermo

cal operation by simply reposition